Watts
For Residential & Commercial Applications ES-WP-CrimpRings Job Name Job Location Engineer Approval LEAD FREE* Copper CrimpRingsTM Sizes: 3/8" - 2" Copper CrimpRingsTM are used to make a leak tight and secure crimped connection of brass (ASTM F1807) or plastic (ASTM F-2159) PEX fittings to PEX (ASTM F-877) CTS sizes SDR9 pipe. Specifications System shall be plumbed using Watts WaterPEX® cross-linked polyethylene pipe and all joints shall be made using Watts Lead Free* Brass and/or Poly-alloy PEX fittings using the Watts copper CrimpRingTM as outlined in the Watts Installation Guidelines. NOTICE Installation Copper CrimpRingsTM must be installed in accordance with all Watts installation procedures, including information provided in installation manual and guidelines. Installation of Copper CrimpRings requires the use of a properly calibrated manual, electric or battery operated crimping tool with the proper ASTM F-1807 sized jaw. For 11/2" and 2" CrimpRings, an electric or battery operated crimping tool must be used to assure proper installation. All connections made with a copper CrimpRing must be checked with a GO/NO Go gauge after completion of the connection. Large diameter LF Brass CrimpRing fittings (11/2" to 2") may only be installed using a corresponding Watts Series WP14C Copper CrimpRing, The recommended crimping method requires an electric or battery operated crimping tool using an ASTM F-1807 certified crimping jaw. All crimp connections must be checked with a GO/NO GO Gauge provided by the tool manufacturer. NOTICE The information contained herein is not intended to replace the full product installation and safety information available or the experience of a trained product installer. You are required to thoroughly read all installation instructions and product safety information before beginning the installation of this product. Contractor Approval Contractor's P.O. No. Representative Approvals CrimpRingsTM ASTM NSF · Manufactured in accordance with American Society for Testing and Materials (ASTM International) F877 and F1807 · Listed by the NSF International to NSF Standards 14 and 61 for use in potable water systems This product is UL 1821 listed for PEX multipurpose systems used to support NFPA 13D when used with Watts (Residential Fire) RF PEXTM Tubing, RF PEXTM Fittings, RF PEXTM Sprinkler Fittings and Copper CrimpRingsTM. You must refer to Watts Residential Fire at watts.com/resfire for further product specification and safety information. DO NOT USE OTHER PRODUCTS WITHOUT SUCH DESIGNATION IN FIRE PROTECTION APPLICATIONS. Dimensions Weights MODEL WP14C-06PB WP14C-08PB WP14C-12PB WP14C-16PB WP14C-20PB WP14C-24PB WP14C-32PB SIZE in. mm 3/8 10 1/2 15 3/4 20 1 25 11/4 32 11/2 28 2 52 TYPE Cu Crimp Ring Cu Crimp Ring Cu Crimp Ring Cu Crimp Ring Cu Crimp Ring Cu Crimp Ring Cu Crimp Ring PACKING WEIGHT lbs. kgs. .1 .05 .1 .05 .2 .09 .2 .09 .3 .14 .4 .18 .4 .18 *The wetted surface of this product contacted by consumable water contains less than 0.25% of lead by weight. A Watts Water Technologies Company ES-WP-CrimpRings 1444 USA: Tel: (978) 689-6066 · Fax: (978) 975-8350 · Watts.com Canada: Tel: (905) 332-4090 · Fax: (905) 332-7068 · Watts.ca Latin America: Tel: (52) 81-1001-8600 · Fax: (52) 81-8000-7091 · Watts.com © 2014 WattsAdobe PDF Library 10.0.1 Adobe InDesign CS6 (Macintosh)