Y04 Foldable Bluetooth Headphones User Manual
Product Overview
This document is the user manual for the Y04 Foldable Bluetooth Headphones, featuring Active Noise Canceling technology.
Product Name: Y04
Type: Foldable Bluetooth Headphones
Key Feature: Active Noise Canceling
Image Description: The manual displays a pair of white and silver foldable over-ear Bluetooth headphones.
Specifications
| Feature | Details |
|---|---|
| Speaker size | 40.0mm |
| Call duration | About 30 hours |
| Charging time | 2 hours |
| Standby time | 100 hours |
| Bluetooth version | V 5.4 |
| Playtime (Bluetooth with ANC on) | 38 hours |
| Playtime (Bluetooth with ANC off) | 48 hours |
| Weight | 236 g / 8.3 oz |
| Battery capacity | 500mAh |
| Transmission range | ≥10m |
| Bluetooth frequency | 2.402-2.480GHz |
| SNR | 110Db |
Key Function Guide
Controls are operated by pressing once or pressing and holding.
- On/Off Button: Press and hold for 3 seconds to turn on or turn off.
- Play/Pause: Short press in music mode to switch between play/pause.
- Answer/Hang up Call: Short press the on/off button to answer or hang up a call.
- Reject Call: In phone mode, long press for 2 seconds to reject the call.
- Volume Up: Long press to increase the volume.
- Volume Down: Long press to decrease the volume.
- Next Song: Short press to switch to the next song.
- Previous Song: Short press to switch to the previous song.
- Activate Siri: Short press to wake up Siri.
- Noise Canceling Mode: Long press for 2 seconds to switch to active noise-canceling mode.
Indicator Status
- ? Steady red: Charging status.
- ?? Rapidly flashing blue and red: Pairing mode.
Usage Instructions
Bluetooth Pairing
Steps:
- Turn on the headphones.
- Enable Bluetooth on your mobile phone.
- Search for "Y04 ANC" and connect to the headphones.
Image Description: A diagram shows a mobile phone screen with Bluetooth settings open, displaying "Y04-ANC" as a connected device.
Charging
Connect a Type-C charging cable to the headphones. The power light will stay red while charging and turn off when fully charged.
Note: Plugging in the charging cable while the headphones are powered on will automatically turn them off.
Aux Audio Cable Usage
1. When the headphones are powered off, insert a 3.5mm AUX audio cable to play music from a phone or other player for Hi-Res sound quality.
2. When the headphones are powered on, inserting a 3.5mm AUX audio cable will automatically turn off the headphones.
Note: Using this function while the headphones are charging is not recommended.
Image Description: A diagram illustrates connecting a 3.5mm AUX cable from headphones to a laptop and a phone, with musical notes indicating audio output.
Disclaimers and Compliance
Disclaimers
Y04 reserves the right of final interpretation of this manual and the design and specifications are subject to change without notice.
FCC Statement
This device complies with part 15 of the FCC rules. Operation is subject to the following two conditions: (1) this device may not cause harmful interference, and (2) this device must accept any interference received, including interference that may cause undesired operation.
Changes or modifications not expressly approved by the party responsible for compliance could void the user's authority to operate the equipment.
NOTE: This equipment has been tested and found to comply with the limits for a Class B digital device, pursuant to part 15 of the FCC Rules. These limits are designed to provide reasonable protection against harmful interference in a residential installation. This equipment generates, uses, and can radiate radio frequency energy and, if not installed and used in accordance with the instructions, may cause harmful interference to radio communications. However, there is no guarantee that interference will not occur in a particular installation. If this equipment does cause harmful interference to radio or television reception, which can be determined by turning the equipment off and on, the user is encouraged to try to correct the interference by one or more of the following measures:
- Reorient or relocate the receiving antenna.
- Increase the separation between the equipment and receiver.
- Connect the equipment into an outlet on a circuit different from that to which the receiver is connected.
- Consult the dealer or an experienced radio/TV technician for help.
The device has been evaluated to meet general RF exposure requirement. The device can be used in portable exposure condition without restriction.