Bluetooth Full Color Floor Lamp User Manual

Package Content

• 1 X Smart Floor Lamp (RGB+CCT) [icon of floor lamp]
• 1 X Remote Control [icon of remote control]
• 1 X User Manual [icon of document]

Product Parts Description

The floor lamp is assembled in several steps:

1. STEP 1: Connect the Led Light Plate and Angle Rotating Head. [rotation arrow]
2. STEP 2: Attach the Touch Switch. [rotation arrow]
3. STEP 3: Connect the 4 x Light Rods. [rotation arrow]
4. STEP 4: Connect to the UL DC 24V Socket. [rotation arrow]
5. STEP 5: Attach the Lamp base. [rotation arrow]

Assembly Instructions

Notes: During this process, the wire will be entangled with the rotation of the rod, please tide the direction of the rope to prevent the wire from being cut.

1. Place the light on a flat surface.
2. Connect all the parts from lamp head to heavy base. (Steps from 1-5)
3. Clockwise and tighten them.

[QR code for Installation Video]

Operating Instruction

1. Short press: on/off ?
2. Long press: adjust the brightness (1%-100%) ☀️
3. Long press for 20 seconds: restore factory settings ⚙️

The rotation angle of the light guide plate can be adjusted manually. It can be rotated up and down by 90 degrees (maximum Angle).

[Diagram showing adjustable light plate angle, max 90 degrees]

Lighting Facts Per Lamp

Download Surplife APP

Download "Surplife" App from Apple Store and Google Play Store, or scan the QR code.

[QR code for Surplife APP]

[QR code for Instructions]

How to connect smart device via Bluetooth?

1. Open your phone Bluetooth, turn on device.
2. Enter "Surplife" app, click "+" at the top right corner.
3. Tap the device with "BLE" on the list, done! (Floor lamp can't be found? Please reset your lamp)

How to reset the factory setting?

Hold the button on the lamp rod, keep 20 seconds, until the lamp flash, done!

2.4G Remote

[Diagram illustrating the 2.4G remote control with buttons for Power On/Off, Brightness Up/Down, Color Choice (R, G, B, C, W), Cycle of Colors, Color Temperature Choice (2700K, 3200K, 4000K, 5000K, 5500K, 6500K, CCT+), Built-in Modes Cycle (M+, M-), and 60s OFF Timer (S1, S2, S3, S4).]

Multifunction Keys

1. B(Brightness)/S(Speed): In static light, brightness increases/decreases. In built-in dynamic mode, speed increases or slows down. [brightness icon]/[speed icon]
2. M(Modes): M+ selects the last Dynamic mode, M- selects the next mode. [mode icon]
3. "CCT+/CCT-" only works under 2700K-6500K.
4. S-(Save scenes): Hold the button for 5s. Lamp flashing means that you saved this scene to "scene 1". Even works on multiple lamps with different colors or modes. [save icon]

Why the remote doesn't works? (Remote Pair)

1. Powering off the lamp, and hold the "i" [info icon] key of remote.
2. Then power on the lamp, releasing the remote control button until the lamp flashes.

Note: Please pair the remote within 5 seconds after the lamp is powered on.

[Diagram showing plug insertion and remote button press for pairing]

How to remove the remote pairing?

1. Power off your light, then plug in.
2. Hold the key "O" [circle icon] until the lamp flashes and release the key.
3. The Lamp will flash which means remove Pairing successfully!

Note: Please pair the remote within 5 seconds after the lamp is powered on.

[Diagram showing plug insertion and remote button press for unpairing]

How to control lamps with 1 remote?

1. Power on the lamp which you want to control.
2. Then follow the steps of Remote Pairing to add the lamp's signal to remote one by one.

[Diagram illustrating one remote controlling multiple lamps]

How to control only one lamp?

1. Power on the lamp you want to remove out to the remote.
2. Then follow the steps of Remote Unpairing, remove the lamp's signal to remote one by one.

[Diagram illustrating one remote controlling a single lamp]