Other Certificate
NDB-PRO Certification Other Certificate 73, Rue de Sèvres 92100 Boulogne-Billancourt France
Your usual Sales office www.netatmo.com
Product Environmental Profile
Video doorbell
NETATMO'S ENVIRONMENTAL COMMITMENTS
· Incorporate environmental management into our industrial sites Of all Legrand sites worldwide, over 85% are ISO 14001-certified (sites belonging to the Group for more than five years).
· Offer our customers environmentally friendly solutions Develop innovative solutions to help our customers design more energy efficient, better managed and more environmentally friendly installations.
· Involve the environment in product design and provide informations in compliance with ISO 14025 Reduce the environmental impact of products over their whole life cycle. Provide our customers with all relevant information (composition, consumption, end of life, etc.).
REFERENCE PRODUCT
Function
Through internet connection, allow audio and video communication between the building external entry and your smartphone, for a period of 10 years, permitting also the control of the entry area through a people detection system who alert you if someone stands in front of the door. Using the dedicated app it is possible to control and download the recorded events. Data protected by encrypted connection. Full HD 1080p video quality and infrared for night vision, with visual field of 140°. Certified protection grade IP44. Supply: 8-24 V a.c. and 230 V a.c.. Provided with a 8GB microSD card.
Reference Product
NDB-PRO Video doorbell
The company reserves the right to change specifications and designs without notice. All illustrations, descriptions, dimensions and weights in the document are for guidance and cannot be held binding on the company.
PRODUCTS CONCERNED
The environmental data is representative of the following products: NDB-PRO NDB-EC, NDB-EC-A, NDB-FR, NDB-DE, NDB-IT, NDB-UK, NDB-US, NDB-P, NDB-IB
PEP ecopassport No LGRP-01539-V01.01-EN
20E0424A-EN
Page 1 / 4
73, Rue de Sèvres 92100 Boulogne-Billancourt France
Your usual Sales office www.netatmo.com
Product Environmental Profile
Video doorbell
CONSTITUENT MATERIALS
This Reference Product contains no substances prohibited by the regulations applicable at the time of its introduction to the market. It respects the restrictions on use of hazardous substances as defined in the RoHS directive 2011/65/EU amended by delegated directive (EU) 2015/863, and its amendment 2017/2102/EU.
Total weight of Reference Product
678 g (all packaging included)
Plastics as % of weight Polycarbonate Polyamide Silicon rubber
Metals as % of weight 22,9 % Aluminium
1,1 % Steel 0,6 %
Packaging as % of weight
Polyethylene
0,2 %
PET
0,2 %
Total plastics
25,0 % Total metals
Estimated recycled material content: 17 % by mass.
Other as % of weight 2,4 % Paper (instructions sheet) 1,6 % Electronic cards
Glass Batteries Cables / Electric wires Other electronic components
Paper / Cardboard Wood 4,0 % Total others
12,0 % 8,8 % 2,2 % 0,9 % 0,3 % 0,7 %
42,0 % 4,1 %
71,0 %
MANUFACTURE
This Reference Product comes from a site that has received ISO14001 certification.
DISTRIBUTION
Products are distributed from logistics centres located with a view to optimize transport efficiency. The Reference Product is therefore transported over an average distance of 3500 km by road from our warehouse to the local point of distribution into the European market. Packaging is compliant with european directive 2004/12/EU concerning packaging and packaging waste. At their end of life, its recyclability rate is 99 % (in % of packaging weight).
INSTALLATION
For the installation of the product only standard tools are needed.
USE
Under normal conditions of use, this product requires no servicing, no maintenance or additional products.
PEP ecopassport No LGRP-01539-V01.01-EN
20E0424A-EN
Page 2 / 4
73, Rue de Sèvres 92100 Boulogne-Billancourt France
Your usual Sales office www.netatmo.com
Product Environmental Profile
Video doorbell
END OF LIFE
The product end of life factors are taken into account during the design phase. Dismantling and sorting of components or materials is made as easy as possible with a view to recycling or failing that, another form of reuse. This product falls within the scope of the WEEE directive (2012/19/EU). Therefore it must be processed through local WEEE recycling/recovery channels.
· Elements to process specifically: In accordance with the requirements of this Directive, the following components must be removed and sent to specific channels for processing which comply with the WEEE Directive 2012/19/EU:
- electronic cards more than 10 cm² : 60 g - lithium-ion polymer battery : 6 g
· Recyclability rate: Calculated using the method described in technical report IEC/TR 62635, the recyclability rate of the product is estimated at 92 %. This value is based on data collected from a technological channel operating on an industrial basis. It does not pre-validate the effective use of this channel for the end of life of this product.
Separated into:
- plastic materials (excluding packaging)
: 23 %
- metal materials (excluding packaging)
: 4%
- other materials (excluding packaging)
: 19 %
- packaging (all types of materials)
: 46 %
ENVIRONMENTAL IMPACTS
The evaluation of environmental impacts examines the stages of the Reference Product life cycle: manufacturing, distribution, installation, use and end of life. It is representative of products marketed and used in Europe in an electrical installation in compliance with the associated product standards.
For each phase, the following modelling elements were taken in account:
Manufacture Distribution Installation Use
End of life Software and database used
Materials and components of the product, all transport for the manufacturing, the packaging and the waste generated by the manufacturing.
Transport between the last Group distribution centre and an average delivery point in the sales area.
The end of life of the packaging.
· Product category: PSR-0005-ed2-EN-2016 03 29 - §3.13. «Other equipments - active products». · Use scenario: ten-year working life. Permanent working mode with an average consumption of 4,5 W for 100 % of the time. This modelling duration does not constitute a minimum durability requirement. · Energy model: Electricity Mix, Europe 27 - 2008.
The default end of life scenario maximizing the impacts.
EIME V5 and its database «CODDE-2018-11»
PEP ecopassport No LGRP-01539-V01.01-EN
20E0424A-EN
Page 3 / 4
73, Rue de Sèvres 92100 Boulogne-Billancourt France
Your usual Sales office www.netatmo.com
Product Environmental Profile
Video doorbell
SELECTION OF ENVIRONMENTAL IMPACTS
Global warming
Total for Life cycle 1.99E+02 kgCO2 eq.
Raw
material and
manufacture Distribution Installation
Use
End of life
6.74E+00 3% 1.18E-01 < 1% 1.95E-02 < 1% 1.92E+02 97% 4.21E-02 < 1%
Ozone depletion
1.44E-05 kgCFC-11 eq. 1.84E-06 13% 2.39E-10 < 1% 1.33E-10 < 1% 1.25E-05 87% 1.04E-09 < 1%
Acidification of soils and water
8.16E-01 kgSO2 eq.
1.33E-02 2% 5.30E-04 < 1% 9.47E-05 < 1% 8.02E-01 98% 1.61E-04 < 1%
Water eutrophication 5.97E-02 kg(PO4)3- eq.
Photochemical ozone formation
4.53E-02 kgC2H4 eq.
Depletion of abiotic resources - elements
3.65E-03 kgSb eq.
Total use of primary energy
3.96E+03 MJ
Net use of fresh water
6.98E+02 m3
Depletion of abiotic resources - fossil fuels
2.24E+03 MJ
1.09E-02 18% 1.22E-04 < 1% 9.69E-05 < 1% 4.84E-02 81% 1.88E-04 < 1% 1.20E-03 3% 3.77E-05 < 1% 6.69E-06 < 1% 4.41E-02 97% 1.26E-05 < 1% 3.64E-03 100% 4.72E-09 < 1% 8.50E-10 < 1% 1.67E-05 < 1% 2.67E-09 < 1% 1.18E+02 3% 1.67E+00 < 1% 2.68E-01 < 1% 3.84E+03 97% 4.62E-01 < 1% 3.70E-01 < 1% 1.06E-05 < 1% 5.97E-06 < 1% 6.97E+02 100% 3.59E-05 < 1% 5.40E+01 2% 1.66E+00 < 1% 2.60E-01 < 1% 2.18E+03 97% 4.15E-01 < 1%
Water pollution
8.99E+03 m3
1.03E+03 11% 1.94E+01 < 1% 3.02E+00 < 1% 7.93E+03 88% 4.81E+00 < 1%
Air pollution
8.79E+03 m3
5.02E+02 6% 4.84E+00 < 1% 2.34E+00 < 1% 8.28E+03 94% 4.88E+00 < 1%
The values of the 27 impacts defined in the PCR-ed3-EN-2015 04 02 are available in the digital database of pep-ecopassport.org website.
For products covered by the PEP other than the Reference Product, the environmental impacts of each life cycle phase are assimilated to those of the Reference Product.
Registration number: LGRP-01539-V01.01-EN
Drafting rules: «PEP-PCR-ed3-EN-2015 04 02» Supplemented by «PSR-0005-ed2-EN-2016 03 29»
Verifier accreditation N°: VH02
Information and reference documents: www.pep-ecopassport.org
Date of issue: 05-2022
Validity period: 5 years
Independent verification of the declaration and data, in compliance with ISO 14025 : 2010
Internal
External
The PCR review was conducted by a panel of experts chaired by Philippe Osset (SOLINNEN)
PEP are compliant with XP C08-100-1 : 2016 The elements of the present PEP cannot be compared with elements from another program
Document in compliance with ISO 14025 : 2010: «Environmental labels and declarations. Type III environmental declarations»
Environmental data in alignment with EN 15804: 2012 + A1 : 2013
PEP ecopassport No LGRP-01539-V01.01-EN
20E0424A-EN
Page 4 / 4
Adobe PDF Library 16.0.7 Adobe InDesign 17.2 (Windows)