THE T500 TILTMETER IS AN. ELECTROLYTIC FLUID-BASED. TILT SENSOR THAT CAN BE. USED FOR PRECISION ROTATION. MEASUREMENTS, GENERALLY OVER.
SENSORS T500 | ELECTROLYTIC TILTMETER THE T500 TILTMETER IS AN ELECTROLYTIC FLUID-BASED TILT SENSOR THAT CAN BE USED FOR PRECISION ROTATION MEASUREMENTS, GENERALLY OVER A SHORT PERIOD OF TIME. THESE UNITS CONNECT DIRECTLY TO OUR STRUCTURAL TESTING SYSTEM, STRUCTURAL MONITORING SYSTEMS, AND ARE ALSO COMPATIBLE WITH MOST GENERIC DATA ACQUISITION SYSTEMS. THE RUGGED ALUMINUM HOUSINGS PROVIDE BOTH EASY MOUNTING AND MECHANICAL ZEROADJUSTMENT CAPABILITY. FEATURES ++ Simple & quick range adjustment ++ Mounting tabs for adhesive application ++ Measurement range from ±0.5° to ±60° ++ 4 mounting configurations ++ Designed to exceed IP67 ++ High accuracy ++ Sub-arc second resolution ++ Internal signal conditioning ++ Overload protection DIMENSIONS APPLICATIONS ++ Rotation in bridge slabs, beams, and piers due to live load ++ Retaining wall or abutment movement during construction ++ Rotation angle of tainter gates during operation 740 S PIERCE AVE UNIT 15 LOUISVILLE, CO 80027 +1.303.494.3230 sales@bditest.com SPECIFICATIONS MODEL T500-005 T500-030 T500-100 LINEAR RANGE (ARC DEGREES) ±0.5 ±3 ±10 TOTAL RANGE (ARC DEGREES) ±1 ±6 ±15 OUTPUT (MV/ARC SECOND) 1 0.4 - OUTPUT (MV/ARC DEGREE) - - 420 RESOLUTION (ARC DEGREES) < 0.0001 < 0.0003 < 0.0005 NULL REPEATABILITY (ARC DEGREES) < 0.0008 < 0.0008 < 0.001 SYMMETRY @ 1/2 LINEAR SCALE (%) < 2 < 2 < 2 ACCURACY @ 1/2 LINEAR SCALE (%FS) - < 2 < 2 ACCURACY @ FULL SCALE (%FS) - < 8 < 5 NULL IMPEDANCE (KOHMS) +/-20% 1 12 40 NULL STABILITY, 12 HRS @ 25 DEG. C (ARC DEG'S, TYP.) < 0.005 < 0.005 < 0.001 SETTLEMENT TIME (SECONDS) ~1.1 ~1.2 ~0.75 EXCITATION VOLTAGE +5 to +15 Vdc POWER RATING MAX TYPICAL INTELLIDUCER1 INPUT IMPEDANCE 75 mW 2.5 mW @ +5.0 Vdc 13 mW @ +5.0 Vdc 5 M OUTPUT ±2 Vdc OPERATING TEMPERATURE -13 °F to 158 °F (-25 °C to 70 °C) STORAGE TEMPERATURE -40 °F to 176 °F (-40 °C to 80 °C) TEMP. COEFFICIENT OF SCALE (%/°C, TYP.) 0.6 0.6 0.1 CABLE HOUSING Custom lead cable length made to order: IC-02-187 [22 AWG, 2 shielded pair, drain wire, red PVC jacket] IC-02-250 [22 AWG, 2 shielded pair, drain wire, blue PVC jacket] IC-03-250 [24 AWG, 3 shielded pair, drain wire, black PVC jacket] Machined 6061-Aluminum CORROSION PROTECTION Hard Anodized Clear (MIL-A-8625 Type III) WEATHER PROOFING Designed to exceed IP67 DIMENSIONS 4.25 x 2.6 x 3 (108 x 66 x 76 mm) WEIGHT 1.2 lb (544 g) MOUNTING Through holes for ¼ in (M6) bolts or anchors on five sides Reusable mounting tabs (gluing/welding) 1 Intelliducer connector required with STS4 Intelliducer data acquisition nodes. T500-600 ±60 ±80 160 < 0.001 < 0.02 < 2 < 0.8 < 3 8 < 0.005 ~1.0 0.1 Available on: GS07F197CA OPTIONS & ACCESSORIES Intelliducer Connector Required for use with STS Intelliducer Nodes, cable is connected and potted for a weatherproof seal. Integrated Thermistor Temperature range of -55 °C to +220 °C, ±0.5 °C accuracy. Reusable Mounting Tabs ¼-20 or M6, zinc plated steel mounting tab. Protective Covers Insulated aluminum protective covers BDITEST.COM ©2019 BDI, All Rights Reserved | Doc. 201541 | Rev. AAdobe PDF Library 15.0 Adobe InDesign 14.0 (Windows)