XtremepowerUS EF-30C Insert Electric Fireplace

IMPORTANT SAFETY INFORMATION!

WARNINGS

• WARNING: ALWAYS keep electric cords, home furnishings, drapes, clothing, papers, or other combustibles at least 3 feet (0.9m) away from the front of this heater, and away from the bottom, sides, and rear of this heater.
• DO NOT place the heater near a bed because objects such as pillows or blankets can fall off the bed and be ignited by the heater.
• DO NOT COVER this heater or block the air vents at all. Doing so could cause a fire.
• AVOID fire or electric shock! NEVER insert or allow any foreign objects to enter the ventilation or exhaust openings of this heater.
• Prevent Fire! Keep all flammable liquids, like gasoline or paint, away from this heater. This heater produces arcing sparks that could ignite flammable liquids.
• DO NOT cover this heater in any manner. Doing so could block the air flow and cause the unit to overheat, or could ignite the material covering the heater.
• NEVER run the power cord under carpet, rugs, runners, or any other covering. Doing so could cause the cord or materials covering the cord to overheat.
• AVOID FIRE! Regularly inspect all air vents to make sure they are free from dust, lint, or other blockage. Unplug the unit and clean with a vacuum ONLY. DO NOT rinse or get wet.
• For residential use only! NOT for commercial use! NEVER use this fireplace for other than its intended purpose.
• Use only the electric insert and included mantel. NEVER use a mantel from another maker.
• NEVER use this electric fireplace insert unless it is properly installed in the correct mantel.
• Exercise extreme caution if using this heater near children, or where children may be present.
• NEVER leave this heater unattended. ALWAYS unplug this heater when not in use.
• This heater is hot when in use. AVOID INJURY! DO NOT TOUCH hot surfaces, or attempt to move this heater while it is hot.
• ALWAYS turn this heater off before unplugging it from the outlet.
• AVOID INJURY! Keep the cord from crossing traffic areas to avoid tripping.
• NEVER modify this fireplace. Doing so could result in personal injury or property damage. Modification of this fireplace completely voids all warranties.
• Discontinue use if this fireplace malfunctions or is dropped or damaged in any manner.
• AVOID INJURY! Keep the cord from crossing traffic areas to avoid tripping.
• AVOID INJURY FROM TIPPING! NEVER place any objects on top of this mantel. This mantel has wheels for mobility, and any object placed on top may cause it to tip over.
• NEVER sit, stand, or climb on this electric fireplace. Doing so could cause the unit to tip over, resulting in serious personal injury or property damage.
• WARNING: Risk of electric shock! DO NOT OPEN! No user-serviceable parts inside!
• ALWAYS disconnect this unit from the power supply before performing any assembly or cleaning, or before relocating the electric fireplace.
• ALWAYS store this heater in a dry location. NEVER use the fireplace if it has become wet.
• NEVER use this heater in bathrooms, laundry rooms, or any other location where the heater could fall into a bathtub or pool, become damp or come in contact with water.
• NEVER hang this unit on a wall directly below an electrical outlet.
• NEVER operate this heater if the power cord or plug has become damaged, or if the grounding pin is damaged or missing.
• Place the heater near a wall outlet so an extension cord is not needed. If an extension cord is needed, the gauge of the cord must be at least 14AWG, and the rating must be at least 1875 Watts. NEVER use a smaller gauge cord with a lower rating. Doing so may result in fire or electric shock.
• ONLY use this heater on a 110~120 Volt 15 Amp grounded circuit. NEVER overload the circuit. If this heater trips the circuit breaker, unplug all other appliances on the same circuit before the next use. Avoid plugging other appliances into the same circuit as this heater.
• NEVER plug this heater into an outlet that is old, cracked, or has any loose wires or connections. Plugging this heater into a faulty outlet could result in electric arcing within the outlet that could cause the outlet to overheat or catch fire.
• ALWAYS check your heater cord and plug connections with each use!
  • i) MAKE SURE the plug fits tight in the outlet! Faulty wall outlet connections or loose plugs can cause the outlet to overheat.
  • ii) Heaters draw more current than small appliances. Overheating may occur even if it has not occurred with the use of other appliances.
  • iii) During use check frequently to see if the plug outlet or faceplate is HOT!
  • iv) If the outlet or faceplate is HOT, discontinue use immediately and have a qualified electrician inspect and/or replace the faulty outlets.
• Diagram shows an electrical adapter with a grounding pin, connecting to a metal grounding screw on an outlet box.
• WARNING: This fireplace has wheels. NEVER use near stairs or ramps, or on unlevel surfaces. Doing so could cause the fireplace to roll downhill or down stairs, and cause personal injury or property damage.
• Read and understand this entire owner's manual, including all safety information, before plugging in or using this product. Failure to do so could result in electric shock, fire, serious injury, or death.
• WARNING: Turn off the appliance, unplug and let cool for at least 10 minutes before attempting to service. Only a qualified professional should attempt to service or repair the appliance.
• WARNING: Risk of electric shock! DO NOT OPEN! No user-serviceable parts inside!
• WARNING: ALWAYS turn the heater OFF and unplug the power cord from the outlet before cleaning, performing maintenance, or moving this fireplace. Failure to do so could result in electric shock, fire, or personal injury.
• WARNING: NEVER immerse in water or spray with water. Doing so could result in electric shock, fire, or personal injury.
• CONSUMER SAFETY INFORMATION:
  • Read this manual before installing and operating this appliance.
  • Failure to follow these instructions may result in electric shock, fire property, or personal injury.
  • Do not store or use gasoline or other flammable liquids in vicinity of this appliance.

Preparation

This insert has a front panel made of GLASS! Use extreme caution when handling glass. Failure to do so could result in personal injury or property damage.

Remove all parts and hardware from the carton and place them on a clean, soft, dry surface. Remove the insert and drawer from the mantel. Check the parts list to make sure nothing is missing. Dispose of packaging materials properly. Please recycle whenever possible.

Tools required for assembly: Phillips screwdriver (Not included)

Operation

Read and understand this entire owner's manual, including all safety information, before plugging in or using this product. Failure to do so could result in electric shock, fire, serious injury, or death.

Power

Make sure the ON/OFF switch, located on the control panel, is in the OFF position. Plug the power cord into a 110~120 Volt 15 Amp grounded outlet (see IMPORTANT SAFETY INFORMATION on Pages 3 and 4). Make sure the outlet is in good condition and that the plug is not loose. NEVER exceed the maximum amperage for the circuit. DO NOT plug other appliances into the same circuit.

Temperature Limiting Control

This heater is equipped with a Temperature Limiting Control. Should the heater reach an unsafe temperature (212°F / 95°C), the heater will automatically turn OFF. To reset:

1. Unplug the power cord from the outlet.
2. Turn the ON/OFF switch on the CONTROL PANEL to OFF. Wait 15 minutes.
3. Inspect the fireplace to make sure no vents are blocked, or clogged with dust or lint. If they are, use a vacuum to clean the vent areas.
4. With the POWER switch in the OFF position, plug the power cord back into the outlet.
5. If it switches off again, UNPLUG THE HEATER RIGHT AWAY! Have the outlets, wiring, and breaker box inspected by a professional. Make necessary repairs before using the heater.

Control Panel

The control panel is in the upper right hand corner of the insert. Open the door to access it.

Master Power Button

Press the master power button once to connect main power, push the master power button once again to turn main power off.

Function Buttons:

Care and Maintenance

WARNING: ALWAYS turn the heater OFF and unplug the power cord from the outlet before cleaning, performing maintenance, or moving this fireplace. Failure to do so could result in electric shock, fire, or personal injury.

Maintenance

Risk of electric shock! DO NOT OPEN! No user-serviceable parts inside!

Electrical and Moving Parts:

• The fan motors are lubricated at the factory and will not require lubrication.
• Electrical components are integrated in the fireplace and are not serviceable by the consumer.

Storage:

Store heater in a clean dry place when not in use.

Cleaning

WARNING: NEVER immerse in water or spray with water. Doing so could result in electric shock, fire, or personal injury.

• Metal: Buff using a soft cloth, slightly dampened with a citrus oil-based product. DO NOT use brass polish or household cleaners as these products will damage the metal trim.
• Glass: Use a good quality glass cleaner and dry thoroughly with a paper towel or lint-free cloth. NEVER use abrasive cleansers, liquid sprays, or any cleaner that could scratch the surface.
• Vents: Use a vacuum or duster to remove dust and dirt from the heater and vent areas. Clean the exterior of the fireplace with a slightly damp cloth or duster.
• Wood: NEVER use abrasive cleansers, liquid sprays, or any cleaner that could scratch the surface. Clean the exterior of the fireplace with a slightly damp cloth or duster.

Troubleshooting

WARNING: Turn off the appliance, unplug and let cool for at least 10 minutes before attempting to service. Only a qualified professional should attempt to service or repair the appliance.

Certifications

This product is ETL Intertek Certified.