USER MANUAL SMART WATCH

Getting Started

Downloading the App & Pairing

Scan the following QR code [QR Code] to download and install the app. Open the app and set up your profile.

After connecting the Smart Watch to the phone, you can use the watch to dial and control the phone for making calls and answering phone calls. You can also view the call history of the watch. You need to keep the connection between the watch and the phone stable when using the phone call function.

Pairing Steps:

• Go to the [Device] section, click 'Add a [Device]'.
• Choose your device on the scanning list.
• The MAC address on the "Setting"-"About" page could help you identify your device on the scanning list.

Charging and Active

Charge the device to activate it before the first time using. To charge your device, plug the charging cable into the adapter or USB port on your computer.

Using the Touch Screen

Swipe Down: Access Control Center.

Swipe Up: View Messages.

Swipe Left: Access Sports/Activity data.

Swipe Right: Access Weather, Heart Rate, etc.

Custom Swipe: (Details not specified)

Smart Watch Features

Phone Calls

After connecting the smart Watch to the phone, you can use the watch to dial to control the phone for making calls and answering the phone calls. You can also view the call history of the watch. You need to keep the connection between the watch and the phone stable when using the phone call function.

Training

Tap the training icon [training icon] on the menu to start a new training measure. Recording, there are 123 sport modes to be chosen. The last training recording will be shown on the training page.

Weather

It could show the weather info of current and tomorrow on the weather page [weather icon]. Weather info is synced after connecting with the APP; it will not be updated after a long disconnection.

Heart Rate Test

The Smart Watch could record your heart rate all day [heart icon]. You also could tap on the page to start measuring heart rate.

Blood Pressure/SpO2 Test

Click on the blood pressure/blood oxygen interface [blood drop icon] to measure the current blood pressure value/blood oxygen value. More detailed analysis and data recording can be viewed in the client.

Messages Reminder

The device can sync incoming notifications from Twitter, Facebook, Whatsapp, Instagram etc. [message icon]. Recently 5 messages can be stored. Note: You can switch on/off the incoming notification in the APP.

Sleep Tracking

If you keep wearing the Smart Watch during your sleep, it can provide the hours slept and quality of sleep stats on both the screen and the APP [moon icon]. Note: Sleep states reset to zero at 8:00 pm.

Remote Shutter

After connecting the device, you can remotely control the camera on your phone [camera icon].

Sports

Smart Watch automatically tracks steps taken on the screen [steps icon]. NOTE: Your movement states reset to zero at midnight.

Player Shutter

After connecting the device, you can remotely control the music player on your phone [music note icon].

Menstrual Period Tracking

Menstrual period, ovulation can be set in the client for period, ovulation peak reminder and prediction [calendar icon].

Remind to Move

The device will vibrate to remind you to make a relax after 1 hour of sitting [sitting person icon]. Note: You can switch on/off this feature in the APP.

Remind to Drink

The smart watch will remind you "Time to Drink Some Water" at the planned drinking time [water drop icon]. Note: You can set this feature in the APP.

Getting to Know Your Device

Using in Wet Conditions

Your device is water-resistant, which means it is rain-proof and splash-proof and can stand up to even the sweatiest workout. NOTE: Do not swim with your Smart Bracelet. We also don't recommend showering with your wristband; though the water won't hurt the device, wearing it 24/7 does not give your skin a chance to breathe. Whenever you get your bracelet wet, dry it thoroughly before putting it back on.

Using Quick View

With Quick View, you can check the time or the message from your phone on your Smart Bracelet without tapping. Just turn your wrist towards you and the time screen will appear for a few seconds.

General Info & Specifications

Environmental Conditions

Operating temperature: 14°F to 122°F (-10°C to 50°C)

Non-operating temperature: -4°F to 140°F (-20°C to 60°C)

Size

Fits a wrist between 5.5 and 7.7 inches in circumference.

Disposal and Recycling

Please be aware that it is the consumer's responsibility to properly dispose of and recycle the Smart Bracelet and accompanying components. Do not dispose of the Smart Bracelet with common household waste; the Smart Bracelet unit is considered electronic waste and should be disposed of at your local electronic equipment collection facility. For more information, please contact your local electronic equipment waste management authority or the retailer where you bought the product.

FCC Compliance

FCC Warning Statement

Changes or modifications not expressly approved by the party responsible for compliance could void the user's authority to operate the equipment. This equipment has been tested and found to comply with the limits for a Class B digital device, pursuant to Part 15 of the FCC Rules. These limits are designed to provide reasonable protection against harmful interference in a residential installation. This equipment generates, uses, and can radiate radio frequency energy and, if not installed and used in accordance with the instructions, may cause harmful interference to radio communications. However, there is no guarantee that interference will not occur in a particular installation. If this equipment does cause harmful interference to radio or television reception, which can be determined by turning the equipment off and on, the user is encouraged to try to correct the interference by one or more of the following measures:

• Reorient or relocate the receiving antenna.
• Increase the separation between the equipment and receiver.
• Connect the equipment into an outlet on a circuit different from that to which the receiver is connected.
• Consult the dealer or an experienced radio/TV technician for help.

FCC Radiation Exposure Statement

The device has been evaluated to meet general RF exposure requirement. The device can be used in portable exposure condition without restriction. This device complies with Part 15 of the FCC Rules. Operation is subject to the following two conditions: (1) This device may not cause harmful interference, and (2) this device must accept any interference received, including interference that may cause undesired operation.