G3000 Getting Started 1

CANON INC.

HERE

Canon PIXMA G3000 Driver Download

• Google Docs
• Google Drive
• Download [pdf]



File Info : application/pdf, 2 Pages, 1.73MB

Document Document

ENGLISH





Getting Started 1  1   1

Video Tutorials 

 

This product requires careful handling of ink. Ink may splatter when the ink tanks are filled with ink. If ink gets on your clothes or belongings, it may not come off.        .         .         .
RMC (Regulatory Model Code): K10430
1

2 a
3
1
a
2

b
a b
3
b b a

CD-ROM (Windows)

Manuals  

2

3

1 Remove the tape and packing materials from outside the printer.       .

4
5
6 b a
7
a b

4
1
2
3
4 5 Pour all ink into the ink tank.
      .

6
7
8 Repeat to to pour all ink into the corresponding ink tanks on the right according to the label.     ~           .
9
10 a b

QT6-4145-V01

XXXXXXXX

© CANON INC. 2021

PRINTED IN XXXXXXXX

5
1
Back  
2 Turn on the printer and check that the flashing of the ON lamp has changed to a double flash.    (ON)       .

3 Initialize the printer.   .
a Hold down the Stop button until the ON lamp flashes again, and then release the button.  (ON)     (Stop)    .
Hold down   
Lit  

4 Refer to either or depending on how you will use the printer.          .
To connect the printer to a PC, smartphone or tablet   PC,    
Getting Started 2  2   2
Follow the steps in the Getting Started 2 to make connections and install software, and then continue the printer setup.  2   2          .

Single flash    

Flashing  

Use the printer without connecting any other devices       

Double flash    

If the Alarm lamp is flashing: 
(Alarm)   :

4 times 4 4

Check that the cartridges are installed correctly and the joint buttons are pushed in. Refer to .
 
  ,    .  .

5 times 5 5
9 times 9
9

No cartridges are installed. Refer to .     .  .
The protective materials are not removed. Press the ON button to turn OFF the printer, and then redo from - .  - 
   . (ON)      -   .

Release after the ON lamp flashes.   (ON)   .
b Check that the ON lamp turns lit and the Wi-Fi lamp flashes.
Wi-Fi (ON)   Wi-Fi   .
Lit  
Flashing  
c Initialization takes about 6 minutes. Proceed to .
6    6  .  .

Lit  
Press the Stop button, and then the Wi-Fi lamp turns lit. Wait about 6 minutes until the ON lamp is lit. When the ON lamp is lit, the printer setup is complete. Wi-Fi 6 (Stop)   Wi-Fi  . (ON)     6  . (ON)      .

Loading Paper 
 

1

a

b

2 Insert several sheets of A4 plain paper with the print side facing up until it stops. Letter size paper can also be loaded.
A4 Letter
  A4         . Letter     .

3
4 b a
The Online Manual is accessible from the website.        .
Windows PC