TP-Link Tapo TC74 Pan/Tilt AI Home Security Wi-Fi Camera

About This Guide

This guide provides a brief introduction to the Pan/Tilt AI Home Security Wi-Fi Camera and the Tapo app, as well as regulatory information. Please note that features available in Tapo may vary by model and software version. Tapo availability may also vary by region. All images, steps, and descriptions in this guide are only examples and may not reflect your actual Tapo Camera experience.

Conventions

More Info

• Specifications can be found on the product page at https://www.tapo.com.
• Technical Support and troubleshooting information can be found at https://www.tapo.com/support/.
• The setup video can be found at https://www.tp-link.com/support/setup-video/#cloud-cameras.

Introduction

When you are away from home, there are always things you care about. This is where the smart camera functions. No matter if your child is climbing the kitchen cabinet or the pet is stealing snacks, the Pan/Tilt AI Home Security Wi-Fi Camera helps you stay connected anytime, anywhere. Receive a notification whenever your camera detects motion and see a video clip of this motion to check everything.

• Smart AI Detection and Notification: Smart AI identifies people, pets, and vehicles while also recognizing abnormal sounds, notifying you as needed.
• Motion Detection and Tracking: Whenever a camera detects motion, it will automatically follow the subject.
• 3K 5MP: Now with 2.25 times more pixels than 1080p, providing clearer videos and photos.
• Night Vision up to 40 ft: Provides a visual distance of up to 40 ft in total darkness.
• Local microSD Storage: Store up to 512 GB of video on a microSD card. (microSD card purchased separately.)
• Field of View: 360° horizontal range.
• Two-Way Audio: Communicate in real time through a built-in microphone and speaker.
• Customizable Block Zones: Set customizable block zones to keep private areas from being monitored.
• Cloud Storage Supported: Store videos by using cloud storage services. (Subscribe for cloud storage at https://www.tapo.com/tapocare/)
• Activity Zones: Set up your own activity zones to only receive alerts that matter.

Appearance

The camera features a lens at the front. On the rear, there is a slot labeled "Micro SD" and a button labeled "RESET". The camera body is mounted on a base.

Diagram Description: A line drawing shows the camera from the front and a close-up of the rear panel. The front view highlights the lens. The rear view shows the microSD card slot and the reset button. An arrow indicates the direction for inserting the microSD card.

System LED Indication

Set Up Your Camera

Follow these steps to set up your new camera:

1. Step 1. Download Tapo App

   Get the Tapo app from the App Store or Google Play, or by scanning the QR code provided.

   [QR code description: A square black and white pattern representing a QR code, used for scanning to download the Tapo app.]

2. Step 2. Log In

   Open the Tapo app and log in with your TP-Link ID. If you do not have an account, create one first.

   [App screenshot description: A mobile app screen showing a login interface with fields for TP-Link ID (Email) and Password, along with 'Remember Me', 'Sign Up', 'LOG IN', and 'Forgot Password?' options.]

3. Step 3. Add Your Camera

   In the app, tap the '+' button, then select 'Add Device'. Search for your camera model and follow the on-screen instructions to complete the setup.

   [App screenshot description: A mobile app screen showing the 'Add a Device' section. It includes a search bar and a list of device categories like 'Indoor Cameras', 'Outdoor Cameras', 'Doorbells', etc.]

Install a microSD Card

Follow these steps to install a microSD card for local recording. You can check the card status or format it in the Tapo app under Camera Settings > microSD Card.

1. Manually rotate the camera downwards to locate the microSD card slot.
2. Identify the correct orientation of the microSD card and carefully insert it into the slot. Push the card until you hear a clicking sound.

Diagram Description: A line drawing shows the camera's rear. The first view shows the camera rotated downwards to reveal the microSD card slot and reset button. The second view shows a microSD card being inserted into the slot.

Mount Your Camera

After adding your camera in the Tapo app, you can place it on a table or shelf. Alternatively, you can mount it on a wall or ceiling using the provided mounting template and screws. Refer to the setup video at https://www.tp-link.com/support/setup-video/#cloud-cameras for detailed instructions.

1. Mark Position

   Place the mounting template where you intend to position the camera. For wall mounting, drill two holes through the indicated circles (diameter 6 mm / 15/64 in.).

   Diagram Description: A circular template with two marked hole positions, indicating a 6 mm diameter for drilling. A drill icon is shown next to it.

2. Mount Base

   Affix the camera base using the provided screws. For wall mounting, insert two anchors into the drilled holes first, then use the screws to secure the base over the anchors.

   Diagram Description: A line drawing showing the mounting base plate with screw holes, and screws with anchors. Dimensions for screws are indicated.

3. Secure Camera

   Attach the camera onto the mounted base and rotate it to secure it in place.

   Diagram Description: A hand holding the camera and attaching it to the base, with an arrow indicating a rotational motion to lock it.

How to Reset Your Camera

You can reset your camera using the Reset button. Alternatively, navigate to Camera Settings in the Tapo app and tap 'Remove Device' to perform a factory reset.

1. Manually rotate the camera downwards to find the Reset button.
2. Press and hold the RESET button to reset the camera.
   • Press and hold for 5 seconds: The LED blinks red slowly. This resets Wi-Fi settings only.
   • Press and hold for 10 seconds: The LED blinks red quickly. This performs a full factory reset.

Diagram Description: Two views of the camera's rear, showing the location of the 'Reset Button' next to the 'Micro SD' slot.

Authentication and Regulatory Information

CE Mark Warning

This is a Class B product. In a domestic environment, it may cause radio interference, requiring the user to take adequate measures.

Operating Frequency

2412MHz—2472MHz (maximum transmitted power 20dBm)

EU Declaration of Conformity

TP-Link declares that this device complies with the essential requirements and other relevant provisions of directives 2014/53/EU, 2009/125/EC, 2011/65/EU, and (EU)2015/863. The original EU Declaration of Conformity can be found at https://www.tapo.com/en/support/ce/.

RF Exposure Information

This device meets EU requirements (2014/53/EU Article 3.1a) for limiting public exposure to electromagnetic fields for health protection. The device complies with RF specifications when used at 20 cm from the body. It is restricted to indoor use.

UKCA Mark

TP-Link declares that this device complies with the essential requirements and other relevant provisions of the Radio Equipment Regulations 2017. The original UK Declaration of Conformity can be found at https://www.tapo.com/support/ukca/.

Packaging Recycling (France)

Description of French recycling symbols: Symbols indicating that the packaging materials should be separated and deposited in the appropriate recycling bins. Instructions are provided to check collection points (e.g., www.quefairedemesdechets.fr).

Korea Warning Statements

Korean text: 당해 무선설비는 운용중 전파혼신 가능성이 있음. (Translation: This wireless equipment may cause radio interference during operation.)

NCC Notice & BSMI Notice (Taiwan)

Chinese text: 取得審驗證明之低功率射頻器材,非經核准,公司、商號或使用者均不得擅自變更頻率、加大功率或變更原設計之特性及功能. 低功率射頻器材之使用不得影響飛航安全及干擾合法通信;經發現有干擾現象時,應立即停用,並改善至無干擾時方得繼續使用. 前述合法通信,指依電信管理法規定作業之無線電通信. 低功率射頻器材須忍受合法通信或工業、科學及醫療用電波輻射性電機設備之干擾. 為避免本器材影像畫面遭偷窺或擷取,本器材使用者應先修改預設密碼,並定期更新密碼. (Translation: Low-power radio frequency devices that have obtained approval shall not be arbitrarily changed in frequency, increased in power, or altered in characteristics and functions by companies, businesses, or users without approval. The use of low-power radio frequency devices shall not affect flight safety or interfere with lawful communication; if interference occurs, it shall be immediately suspended and improved until there is no interference before continuing use. The aforementioned lawful communication refers to radio communication operated in accordance with the Telecommunications Management Act. Low-power radio frequency devices must tolerate interference from lawful communication or industrial, scientific, and medical radio frequency radiating electrical equipment. To prevent the camera's image from being spied on or captured, users of this equipment should first change the default password and update it regularly.)

Safety Advice and Precautions

• Use only the original power adapter or a power supply of the specified type for this product.
• Disconnect the power cord before cleaning the product. Do not use liquid, spray cleaners, or wet cloths for cleaning.
• Keep the product dry and avoid splashing water or other liquids onto it.
• Slots and openings are provided for ventilation to ensure reliable operation and prevent overheating. Do not block or cover these openings.
• Do not place the product near heat sources. Ensure adequate ventilation; do not place it in enclosed spaces.
• Do not disassemble or attempt to repair the product yourself. Contact the manufacturer or distributor for assistance if the product malfunctions.

RoHS Compliance Statement

Equipment Name: Rotating AI Home Security / Wi-Fi Network Camera

Type Designation: TC74

Restricted Substances and their Chemical Symbols

Notes:

• Note 1: "Exceeding 0.1 wt %" and "exceeding 0.01 wt %" indicate that the percentage content of the restricted substance exceeds the reference percentage value of presence condition.
• Note 2: "○" indicates that the percentage content of the restricted substance does not exceed the percentage of reference value of presence.
• Note 3: The "-" indicates that the restricted substance corresponds to the exemption.

Ukrainian Certification

Ukrainian text: Продукт сертифіковано згідно с правилами системи УкрСЕПРО на відповідність вимогам нормативних документів та вимогам, що передбачені чинними законодавчими актами України. (Translation: The product is certified according to the rules of the UkrSEPRO system for compliance with the requirements of regulatory documents and requirements stipulated by the current legislative acts of Ukraine.)

EAC Mark: Description of the EAC mark, indicating conformity with Eurasian Economic Union technical regulations.

Safety Information

• Keep the device away from water, fire, humidity, or hot environments.
• Do not use a damaged charger or USB cable to charge the device.
• Use only recommended chargers.
• Do not use the device where wireless devices are prohibited.
• The adapter should be installed near the equipment and be easily accessible.
• Use only power supplies provided by the manufacturer in the original packaging. Contact TP-Link for any questions.
• For indoor use only.
• Do not disassemble, repair, or modify the product.
• Do not use the product if the casing is broken, as this poses a risk of electric shock.
• Never touch the product with wet hands.
• Do not expose to heavy rain or any type of moisture.
• Do not place the device near automatically controlled devices like fire alarms, as emitted radio waves may cause malfunctions and accidents.
• Observe restrictions on using wireless products in fuel depots, chemical plants, or during blasting operations.
• Do not use liquid to clean the product; use a dry cloth only.
• Never insert metal objects into the product. If a metal object enters, turn off the circuit breaker and contact an authorized electrician.
• This product is not intended for use during medical care. Consult the manufacturer of personal medical devices (e.g., pacemakers, hearing aids) to determine if they are adequately shielded from external RF energy.
• Do not use this product in healthcare facilities, as sensitive equipment may be present.
• Do not use the product near water (e.g., bathtub, wash bowl, kitchen sink, laundry tub, wet basement, swimming pool).
• Keep the product free from excessive smoke, dust, high temperatures, and vibration.
• Do not expose the product to direct sunlight.
• Do not place heavy objects on top of the product.
• When leaving the product unused for an extended period, unplug it from the power outlet.
• This product may interfere with other electronic devices such as TVs, radios, personal computers, and phones.
• Operating Temperature: 0°C to 40°C (32°F to 104°F).

Please read and follow the safety information. TP-Link cannot guarantee against accidents or damage due to improper use. Use the product with care and at your own risk.

Explanation of Symbols on the Product Label

Note: The product label is located on the bottom of the product and its power supply. Symbols may vary by product.

Electrical Symbols

Operational and Safety Symbols

Switch Construction Symbols