Buy Viega 77387 ProPress 3/4" Copper Tee - Triple Press
Pocket Guide Viega ProPress® Systems Viega. Connected in quality. Building on Tradition Founded 120 years ago, Viega is a privately owned, international group of companies. In the United States, Canada, Mexico, and Latin America, Viega specializes in plumbing, heating, and pipe joining technologies. The values of Viega's founder, Franz-Anselm Viegener, are just as present today as they were when he started the company in 1899. Courage, passion, and innovative spirit are still the basics of Viega's foundation. ProPress 2½" to 4" formerly ProPress XL-C®. At Viega, safety is priority. Safe, certain, and secure, Viega fittings are designed for peace of mind. 2 1 3 4 1. In all ProPress ½" to 2" fittings, Viega's unique, patented Smart Connect technology helps installers ensure that they have pressed all connections. 2. The EPDM sealing element is suitable for many applications. 3. Viega's distinctive hexagonal pressing pattern bonds the fitting and tube and provides the mechanical strength for the connection. 4. Cylindrical guides help installers ensure the proper insertion of the tube and protect the sealing element. 1. In ProPress 2½" to 4" fittings, the 420 stainless steel grip ring's teeth bite into the tube and lock the fitting securely in place. 2. A PBT (Polybutylene Terephthalate) separator ring protects the sealing element from damage by creating a positive physical separation during installation and later during pressing. 3. The EPDM sealing element ensures water-tight or air-tight connections. ©2019, Viega®, ProPress®, Smart Connect®, and XL® are registered trademarks of Viega GmbH & Co. KG. Viega: Connected in quality® is a trademark of Viega Holding GmbH & Co. KG. XL-C® is a registered trademark of Viega LLC. RIDGID® is a registered trademark of RIDGID, Inc. 2 PG-PP 724604 1219 ProPress Systems Table of Contents Introduction_____________________________________________________ 4 Viega ProPress Systems ______________________________________ 4 System Data ____________________________________________________ 7 Viega ProPress Fitting Systems ________________________________ 7 Product Instructions _____________________________________________ 8 Viega ProPress ½" to 2" Fittings ________________________________ 8 Viega ProPress 2½" to 4" Fittings_______________________________ 9 Technical Information___________________________________________ 10 Approved Applications_______________________________________ 10 Minimum Clearance Between Two Viega Press Connections _______ 11 Friction Loss in Equivalent Feet of Tube _________________________ 11 Sealing Element Description __________________________________ 12 No-Stop Couplings__________________________________________ 12 Soldering or Brazing_________________________________________ 13 Welding ___________________________________________________ 13 General Installation Notes ____________________________________ 14 Deflection__________________________________________________ 15 Tool Clearances ____________________________________________ 16 Pressing with Ring and Actuator in Tight Quarters ________________ 19 Dimensional Documentation ____________________________________ 21 ProPress Fittings ½" to 2" ____________________________________ 21 ProPress Fittings 2½" to 4" ___________________________________ 37 Frequently Asked Questions_____________________________________ 44 Limited Warranty _______________________________________________ 47 Viega ProPress Fittings and Valves_____________________________ 47 Viega products are designed to be installed by licensed and trained plumbing and mechanical professionals who are familiar with Viega products and their installation. Installation by non-professionals may void Viega LLC's warranty. DANGER! Read and understand all instructions for installing Viega ProPress fittings. Failure to follow all instructions may result in extensive property damage, serious injury, or death. This document is subject to updates. For the most current Viega technical literature please visit www.viega.us. PG-PP 724604 1219 ProPress Systems 3 Introduction Viega ProPress Systems Viega ProPress systems are state-ofthe-art press fitting systems that provide economical and reliable installations for the commercial, industrial, and residential markets. Viega ProPress are copper and zero lead bronze fittings and valves in copper tube size (CTS) ranging from ½" to 4". The fittings require no soldering or brazing and are installed with electro-hydraulic press tools (battery-powered or corded press tools). The fittings feature a green dot representing Smart Connect® technology with an EPDM sealing element suitable for many applications. Viega's unique, patented Smart Connect technology helps installers ensure that they have pressed all connections. Viega ProPress systems can help reduce installation time up to 60 percent compared to traditional methods of pipe joining. Soldering and brazing copper can be messy and time consuming, and connections are not always reliable. With Viega press technology, installers can make consistent, secure press connections in less than seven seconds without flame or heavy equipment. For applications ranging from potable water to inert gases, Viega ProPress fittings can be customized for a wide variety of applications in industrial, commercial, or residential projects. 4 PG-PP 724604 1219 ProPress Systems Introduction Smart Connect Technology Security Under Pressure Locating unpressed connections is an Unpressed connections are located important step in the pressure testing by pressurizing the system with air process. Viega ProPress includes Smart or water. When testing with water Connect technology, providing quick the proper pressure range is 15 to 85 and easy identification of unpressed psi. Pressure testing with air can be connections during a pressure test. dangerous at high pressures. When testing with compressed air the proper Smart Connect technology is an integral pressure range is ½ to 45 psi. Following part of the design of the fitting, providing a successful Smart Connect test, the a path for liquids and/or gases from system may be pressure tested up to inside the system past the sealing 600 psi maximum for water and 200 psi element of an unpressed connection. maximum for air if required by local code When pressed according to our Product requirements. Instructions, the fluid path is altered, creating a leak-proof, reliable connection. 1Identify an unpressed connection during pressure testing when air or water flows past the sealing element. 2 Upon identification, use the press tool to press the fitting, making a secure, leakproof connection. 3 Viega ProPress connections are fast, flameless, and reliable. PG-PP 724604 1219 ProPress Systems 5 Introduction Security with Smart Connect High-quality sealing element Cylindrical guide High-quality fitting body material Cylindrical Guides All Viega ProPress fittings are designed with cylindrical guides to keep the tube straight and protect the sealing element during assembly. Fittings that do not have cylindrical guides risk making an unsecure connection and leave the sealing element vulnerable to damage prior to pressing. Fittings are radially pressed around the sealing element in a single step. 6 PG-PP 724604 1219 ProPress Systems System Data Viega ProPress Fitting Systems Viega ProPress may only be pressed onto copper tube in accordance with ASTM B88 or B75. When pressing onto B88 copper tube types K, L, and M may be used. Tempers O60 and O50, known as "soft copper", are limited to nominal sizes ½ to 1 ¼. Temper H58, known as "hard copper", may be used with nominal sizes ½ to 4. When pressing onto B75 copper tube, the tube dimensions must be in accordance with Viega specifications. Only tempers H58, O60, and O50 may be used with ProPress. Viega ProPress fittings are available in elbows, couplings, reducers, tees, reducing tees, threaded adapters, unions, caps, and flanges. All threaded ½" to 2" fittings are Zero Lead bronze. Operating Parameters Operating Pressure: 200 psi maximum Test Pressure: 600 psi maximum Operating Temperature: 0°F to 250°F Listings and Certificates NSF/ANSI 61 NSF/ANSI 372 IAPMO PS-117 UL/ANSI 213 FM Class 1920 ICC-ES LC1002 ABS CSA Low Lead Content ASME B16.51, B31.1, B31.3, B31.9 NFPA 13, 13D, 13R Compliant with: ASME B31 ASTM B88 ASTM B75 IAPMO National Standard Plumbing Code (NSPC) IAPMO Uniform Mechanical Code (UMC) IAPMO Uniform Plumbing Code (UPC) ICC International Mechanical Code (IMC) ICC International Plumbing Code (IPC) ICC International Residential Code (IRC) Approved Applications: Hot and cold potable water Rainwater/gray water Fire sprinkler (175 psi maximum) Chilled water Hydronic heating (with glycol) Low-pressure steam (15 psi maximum) Ethanol Compressed air Non-medical gases Vacuum (29.2" Hg maximum @ 68°F) ProPress fittings are approved for installations in both above- and belowground applications. Per code, local inspector approval must be obtained prior to installation below ground. It is the responsibility of the installer or any other parties to adhere to all applicable local rules and regulations governing the nature of the installation. The use of the system for applications other than those listed or outside of these parameters must be approved by the Viega Technical Services Department. PG-PP 724604 1219 ProPress Systems 7 Product Instructions Viega ProPress ½" to 2" Fittings For Hard Copper Tubing in ½" to 2" and Soft Copper Tubing in ½" to 1¼" 1 2 3 4 5 66 7 8 9 10 1 Cut the tube square using a displacement-type cutter or fine-toothed steel saw. Note: Cut tubing a minimum of four inches away from the contact area of the vise to prevent possible damage to the tubing in the press area. 2 Deburr inside and outside of the tube to the proper insertion depths to prevent cutting of the sealing element. 3 Check the sealing element for correct fit. Do not use oils or lubricants. 4 Mark the proper insertion depth on the outside of the tube (see table below). Improper insertion depth may result in improper seal. Minimum Insertion Depth for ProPress Tube Size ½" ¾" 1" 1¼" 1½" 2" Insertion Depth ¾" " " 1" 17/16" 19/16" 5 While turning slightly, slide press fitting onto the tube to the marked insertion depth. End of tubing must contact stop. 6 Insert appropriate Viega ProPress jaw into the press tool and push in, holding pin until it locks in place. 7 Open the jaw and place at right angle on the fitting. Visually check insertion depth using mark on tubing. 8 Hold trigger on press tool until press jaws have fully engaged the fitting. Jaws will automatically release after a full press is made. 8 WARNING! Keep extremities and foreign objects away from press tool during pressing operation to prevent injury or incomplete press. 9 After pressing, open the jaw and remove the press tool. 10 Pressure testing with Smart Connect: Unpressed connections are located by pressurizing the system with air or water. When testing with water, the proper pressure range is 15 psi to 85 psi. When testing with compressed air, the proper pressure range is ½ psi to 45 psi maximum. If testing with compressed air, use an approved leakdetect solution. Following a successful pressure test, the system may be pressure tested up to 200 psi with air or up to 600 psi with water. Testing for unpressed connections using Smart Connect is not a replacement for pressure testing requirements of local codes and standards. PG-PP 724604 1219 ProPress Systems Product Instructions Viega ProPress 2½" to 4" Fittings For Hard Copper Tubing in 2½" to 4" 1 2 3 4 5 6 7 8 9 10 11 1 Cut the tube square using a displacement-type cutter or fine-toothed steel saw. Note: Cut tubing a minimum of four inches away from the contact area of the vise to prevent possible damage to the tubing in the press area. 2 Deburr inside and outside of the tube to the proper insertion depths to prevent cutting of the sealing element. 3 Check the sealing element and grip ring for correct fit. Do not use oils or lubricants. 4 Illustration demonstrates proper fit of grip ring, separation ring, and sealing element. 5 Mark the proper insertion depth on the outside of the tube (see table below). Improper insertion depth may result in improper seal. Minimum Insertion Depth for ProPress Tube Size 2½" 3" 4" Insertion Depth 111/16" 115/16" 2" 6 While turning slightly, slide press fitting onto the tube to the marked insertion depth. End of tubing must contact stop. 7 Insert appropriate Viega ProPress jaw into the press tool and push in, holding pin until it locks in place. ProPress ½" to 4" fitting connections must be performed with ProPress XL-C rings and V2 actuator. 8 Open the XL-C ring and place at right angles on the fitting. Ensure that the XL-C ring is engaged on the fitting bead. 9 Open the V2 actuator and connect the V2 actuator to the XL-C ring. Visually check insertion depth using mark on tubing. WARNING! Keep extremities and foreign objects away from press tool during pressing operation to prevent injury or incomplete press. 10 Hold trigger until the V2 actuator has fully engaged the XL-C ring. Release V2 actuator from XL-C ring and then remove the XL-C ring from the fitting. 11 Remove tag from fitting, indicating press has been performed. Note: Pressure testing with Smart Connect: Unpressed connections are located by pressurizing the system with air or water. When testing with water, the proper pressure range is 15 psi to 85 psi. When testing with compressed air, the proper pressure range is ½ psi to 45 psi maximum. If testing with compressed air, use an approved leak-detect solution. Following a successful pressure test, the system may be pressure tested up to 200 psi with air or up to 600 psi with water. PG-PP 724604 1219 ProPress Systems 9 Technical Information Approved Applications System Operating Conditions Product Line, Material, and Sealing Element2 ProPress Media1 Copper Comments Max Pressure (psig) Temperature Range (°F) EPDM FKM HNBR Water/Liquids Hot and water cold potable Test pressure 600 psi Rainwater / Graywater Chilled Water 50% Ethylene / Propylene glycol 200 Note 3 Hydronic Heating Water 50% Ethylene / Propylene glycol Fire Sprinkler NFPA 13, 13D, 13R 175 Ambient6 Low-pressure steam 15 Max 250° 4 Fuels/Oils/Lubricants Ethanol Lube Oil Pure grain alcohol Petroleum based 200 Ambient6 Max 150° Diesel Fuel 125 Max 100° Gases Compressed Air Oil Concentration 25 mg/m3 Oil Concentration >25 mg/m3 Nitrogen - N2 Carbon Dioxide - CO2 Dry Carbon Monoxide - CO 200 Max 140° Argon - Ar Oxygen - O2 Hydrogen - H2 Vacuum Non-medical Keep free of oil and grease 140 Max 140° 125 Minimum absolute pressure 750µm Hg Max 160° Special Media Acetone Liquid 70 -14° to 104° 1 It is recommended that all systems be clearly labeled with the media being conveyed. For further information please consult Viega Technical Services. 2 All Viega systems must be used with the manufacturer's recommended sealing element. Contact your local Viega representative or Viega Technical Services for specific application temperature, pressure, and concentration limits. 3 System pressure and temperature ranges depend on sealing element. Any ranges listed above will be overruled by the sealing element limits here: 3a EPDM temperature ranges are typically 0°F to 250°F. 3b FKM temperature ranges are typically 14°F to 284°F with temperature spikes (24hr) up to 356°F. 3c HNBR temperature ranges are typically -40°F to 180°F. 4 System contains adequate condensate drainage. 5 Compliant with CSA 6.32 / ANSI LC-4. 6 Ambient temperatures should be taken as normal operating conditions for the applications not to exceed sealing element limitations. 7 Tubing with oxygen barrier should be used for systems with ferrous components. 10 PG-PP 724604 1219 ProPress Systems Technical Information Minimum Clearance Between Two Viega Press Connections Tubing Diameter (in) ½ ¾ 1 1¼ 1½ 2 2½ 3 4 Viega ProPress Minimum Clearance (in) 0 0 0 7/16 ¾ Minimum Clearance (mm) 0 0 0 10 15 20 15 15 15 minimum distance Friction Loss in Equivalent Feet of Tube Wrought -- Copper Fittings Size 90° Elbow 45° Elbow Tee Branch Tee Run Coupling ½" 1.0 0.5 2.0 -- -- ¾" 2.0 0.5 3.0 -- -- 1" 2.5 1.0 4.5 -- -- 1¼" 3.0 1.0 5.5 0.5 0.5 1½" 4.0 1.5 7.0 0.5 0.5 2" 5.5 2.0 9.0 0.5 0.5 2½" 7.0 2.5 12.0 0.5 0.5 3" 9.0 3.5 15.0 1.0 1.0 4" 12.5 5.0 21.0 1.0 1.0 Cast -- Zero Lead Bronze Fittings Size 90° Elbow Tee Run Tee Branch ½" 1 ½ 2 ¾" 2 ½ 3 1" 4 ½ 5 1¼" 5 1 7 1½" 8 1 9 2" 11 2 12 PG-PP 724604 1219 ProPress Systems 11 Technical Information Sealing Element Description EPDM Sealing Element ProPress fittings are manufactured with an EPDM sealing element installed at the factory. The EPDM sealing element is used mainly for potable water, hydronic heating, fire sprinkler, and compressed air installations. Definition: EPDM Ethylene-Propylene-Diene-Monomer, gloss black in color Operating Temperature: 0°F to 250°F The EPDM sealing element is a synthetically manufactured and peroxidically crosslinked general-purpose elastomer with a wide range of applications. It is resistant to aging, ozone, UV, weathering, environmental influences, chemicals, and most alkaline solutions. The EPDM sealing element is recommended for drinking water applications. It is particularly resistant to hot water, making it ideal for seals and gaskets in heating systems, fittings, and household appliances (e.g., washing machines, pumps, and dishwashers). It is not resistant to hydrocarbon solvent solutions, oils, chlorinated hydrocarbons, turpentine, and gasoline. Operating Temperature: 14°F to 284°F (with temperature spikes up to 356°F) The FKM sealing element is a specialpurpose elastomer typically installed where higher temperatures are required. It possesses excellent resistance to aging, ozone, UV, weathering, environmental influences, and oils and petroleum-based additives. HNBR Sealing Element ProPress press fittings may be changed from the factory-installed EPDM sealing element to an HNBR sealing element. See Changing Sealing Elements Product Instructions. The HNBR sealing element is used mainly for inert gas, liquid fuel, and lubricant oil. It is commonly used in fuel oil heating systems. Definition: HNBR Hydrogenated Nitrile Butadiene Rubber, yellow in color Operating Temperature: -40°F to 180°F HNBR is widely known for its physical strength and retention of its properties after long-term exposure to heat, oil, and chemicals. FKM Sealing Element ProPress fittings may be changed from the factory-installed EPDM sealing element to an FKM sealing element. See Changing Sealing Elements Product Instructions. FKM is well known for its excellent resistance to petroleum products and solvents as well as exceptional high-temperature performance, which make it ideal for seals and gaskets in solar, district heating, low-pressure steam, and compressed air system. Definition: FKM Fluoroelastomer, dull black in color The unique properties of the HNBR sealing element have resulted in the wide adoption of it in automotive, industrial, and assorted performance-demanding applications (e.g., engine seals, grommets, and gaskets; fuel system seals and hoses; transmission system bonded piston seals; chevron seals, oil field packers, and rotary shaft seals.) The HNBR sealing element is not suitable for food contact applications and cannot be installed in drinking water applications. 12 PG-PP 724604 1219 ProPress Systems Technical Information No-Stop Couplings Soldering or Brazing No-stop couplings and extended no-stop couplings are often used to conduct repairs. Without a stop, these couplings can slide completely onto a tube and allow a connection to be made in tighter spaces. Unlike fittings with an integrated stop that have a minimum insertion depth, no-stop couplings have minimum and maximum allowable insertion depths. The minimum and the maximum insertion depths should be marked and a line should connect the two marks. Drawing a line between the minimum and maximum insertion marks distinguishes a good connection on a no-stop coupling from a bad connection on a coupling with a stop. Using ProPress In Line with Existing Fittings Maintain proper distances when installing a ProPress fitting near an existing soldered or brazed fitting. Tube Diameter (in) ½ ¾ 1 1¼ 1½ 2 2½ 3 4 Minimum Distance from Soldered in mm ¼ 7 ¼ 7 7/16 11 7/16 11 16 ¾ 19 ¼ 7 ¼ 7 ¼ 7 Minimum Distance from Brazed in mm 1 26 1½ 38 2 51 2½ 64 3 76 4 102 5 127 6 153 8 204 Viega ProPress No-Stop Couplings Tube Minimum Diameter (in) Insertion in mm Maximum Insertion in mm ½ ¾ 19 22 ¾ 23 1 28 1 23 1 28 1¼ 1 26 13/16 30 1½ 17/16 37 19/16 40 2 19/16 40 1¾ 44 2½ 111/16 43 2 67 3 115/16 50 215/16 75 4 2 60 37/16 87 Viega ProPress Extended No-Stop Couplings Tube Minimum Maximum Diameter (in) Insertion Insertion in mm in mm ½ ¾ 19 2¼ 57 ¾ 23 2 67 1 23 2 73 1¼ 1 26 3 80 1½ 17/16 37 35/16 84 2 19/16 40 3¾ 95 Soldering or Brazing In Line with Existing ProPress Fitting To prevent damage to the sealing element and ensure proper sealing of the soldered/brazed joint and the press connection, maintain proper soldering/ brazing distances from the fitting. Tube Diameter (in) ½ ¾ 1 1¼ 1½ 2 2½ 3 4 Soldering Minimum Distance in mm 1½ 38 2¼ 57 3 76 3¾ 95 4½ 114 6 153 7½ 191 9 229 12 305 Brazed Minimum Distance in mm 4½ 114 6¾ 172 9 229 11¼ 286 13½ 343 18 457 22½ 572 27 686 36 915 PG-PP 724604 1219 ProPress Systems 13 Technical Information Welding Welding Adjacent to a Press Fitting To prevent damage to the sealing element, maintain proper welding distances from the fitting. If welding adjacent to the connection, weld a minimum of four inches away. Welding Requirements The installer should take precautions to keep the ProPress connection cool: Wrap the connection with a cold wet rag. Protect the connection with a weld blanket. Prefabricate solder connections/welded fittings prior to installing the press fitting. (Ensure tube has cooled before installing the press fitting.) Apply heat sink gel or spray or spot freezing. General Installation Notes Expansion Thermal expansion in installed systems generates stress on tubing and appliance connectors. Compensation must be allowed for expansion and contraction that may occur within the tubing. Expansion joints or mechanical expansion compensators may be used to alleviate these stresses. Electrical Bonding When properly installed, ProPress fittings comply with Section 1211.15 Electrical Bonding and Grounding of the Uniform Plumbing Code. The mechanical press provides continuous metal-to-metal contact between fitting and tube. The press ensures the continuity of the bonding through this contact. Exposure to Freezing Temperatures Viega ProPress systems with EPDM sealing elements can be installed in ambient temperatures down to 0°F. When the contents could freeze, tubing must be protected per acceptable engineering practices, codes, and as required by local code. Underground Installations Viega ProPress fitting systems with copper tubing are approved for underground installations. However, installations must meet all state and local codes, including those for underground. Proper authorization must be obtained prior to installation from the Authority Having Jurisdiction. Concealed Spaces The Viega ProPress fitting system has been approved for use in concealed spaces. Specific performance tests were conducted to evaluate the fittings for use in concealed spaces. Concealed tubing and fittings shall be protected from puncture threats. Corrosion Protection Viega ProPress fittings exposed to corrosive action, such as soil conditions or moisture, must be protected in an approved manner in accordance with NFPA 54 Section 404.8, NACE Standard RP0169-2002 Section 5, 2009 UPC Chapter 6 Section 609.3.1, 2009 UMC Chapter 13 Section 1312.1.3, or satisfying local code requirements. In addition, systems should be properly sized to minimize the risk of erosion corrosion resulting from excessive velocities. Pressure Surges Pressure surges or transients from fast- acting valves, pump surges, and other sources that result in water hammer may cause damage to many system components, including press fittings. When fast-acting valves and/or pumps are incorporated into a system, the designer and installer should isolate press fittings from sharp pressure surges. Transition Fittings Threaded The Viega ProPress systems can be joined with off-the-shelf threaded fittings made of non-ferrous metals. In this regard: The threaded connection is made first. The press connection is made second. This process avoids unnecessary torsion on the press fitting. 14 PG-PP 724604 1219 ProPress Systems Technical Information Transition Fittings Flange When using Viega flanges, bolt the flange end in place prior to pressing the fitting to the tube. Rotating a Pressed Fitting Once a ProPress fitting has been pressed, it can be rotated (not by hand), but once rotated more than five degrees, the fitting should be re-pressed to restore resistance to rotational movement. If the fitting is repressed, care should be taken to align the flat sides on the jaw with those on the fitting. Deflection The pressing process can cause deflection (angular misalignment) to occur. When pressing Viega ProPress fittings in a system, the deformation of the fitting is constant. This allows for a consistent leak-free joint every time and is a result of the pressing technique. Deflection occurs in the same way for every fitting. The fitting being pressed will move in the direction of the jaw or ring opening. Controlling Deflection Deflection while pressing can be minimized by utilizing the following installation practices. Alternates for Presses Press one end of fitting. Make second press on other end of fitting from the opposite side. Push-Pull Method Rings = Push on press tool. Jaws = Pull on press tool. The press tool can be feathered using the trigger as needed to apply pulling or pushing force to control deflection. Re-Press Press the fitting, once on each side (that is, re-press the fitting a second time on the opposite side). Pressing the same connection from the opposite side will usually straighten misalignment between the tube and fitting. Since the fitting will deflect toward the opening of the jaw or ring, the tube end will deflect in the opposite direction. By counteracting the fitting movement, one can minimize the deflection of the fitting and ultimately the tube. When using strut and clamps, deflection is minimized and nearly eliminated depending on clamp spacing. When pressing overhead piping, it may be inconvenient to alternate sides for each press. The natural weight of the piping plus pressing on opposite sides at a 45-degree angle should adequately eliminate deflection. This technique can also be used for any horizontal piping and when working above the piping. PG-PP 724604 1219 ProPress Systems 15 Technical Information Tool Clearances Minimum distances should be taken into consideration during planning in order to avoid space constraints during installation. ProPress Standard Jaws Clearance Ensure that the space required for system pressing tools is available if Viega ProPress fittings will be installed immediately upstream or downstream from wall or floor penetrations. ProPress Compact Jaws Clearance B B A Tube Diameter ½" ¾" 1" 1¼" 1½" 2" A minimum ¾" " 1" 1" 1¾" 2" B minimum 1" 2" 2½" 2" 3½" 4" ProPress Standard Jaws Clearance Between Tube, Wall, and Floor A Tube Diameter ½" ¾" 1" 1¼" A minimum ¾" " " 1" B minimum 2" 2" 2" 3" ProPress Compact Jaws Clearance Between Tube, Wall, and Floor C 20° C B 20° B A Tube A B C Diameter minimum minimum minimum ½" " 1" 2½" ¾" 1" 1½" 2½" 1" 1" 1¾" 3" 1¼" 1¼" 2¼" 3" 1½" 1" 2½" 3¾" 2" 2" 3" 5" A Tube A B C Diameter minimum minimum minimum ½" " 1" 2½" ¾" 1" 1½" 2¾" 1" 1" 1" 3" 1¼" 1" 2" 3" 16 PG-PP 724604 1219 ProPress Systems Technical Information ProPress Rings Dimensions " $ # ProPress Rings with V2 Actuator Clearance Tube Diameter 1½" 2" A minimum 2" 29/16" B minimum 35/16" 4" Tube A B C Diameter minimum minimum minimum ½" 2¼" 2" 11/16" ¾" 211/16" 2" 1" 1" 215/16" 35/16" 13/16" 1¼" 35/16" 3" 13/16" 1½" 311/16" 45/16" 13/16" 2" 47/16" 57/16" 13/16" ProPress Rings with V1 Actuator Clearance Between Tube, Wall, and Floor ProPress Rings with V1 Actuator Clearance Tube A B C Diameter minimum minimum minimum ½" 1" 39/16" 25/16" ¾" 1¾" 3" 2" 1" 2" 313/16" 23/16" 1¼" 23/16" 3¾" 2" Tube Diameter ½" ¾" 1" 1¼" A minimum 1" 1¾" 2" 23/16" B minimum 23/16" 23/16" 1" 215/16" PG-PP 724604 1219 ProPress Systems ProPress Rings with V2 Actuator Clearance Between Tube, Wall, and Floor Tube A B C Diameter minimum minimum minimum 1½" 2" 5" 23/16" 2" 29/16" 4¾" 39/16" ProPress Rings with C1 Actuator Clearance Between Tube, Wall, and Floor Tube A B C Diameter minimum minimum minimum ½" 1" 3¼" 2" ¾" 1¾" 3¼" 1" 1" 2" 3¼" 1" 1¼" 23/16" 3" 1" 17 Technical Information ProPress XL-C Rings Dimensions " $ ProPress XL-C Rings Clearance Between Tube, Wall, and Floor B # C Tube Diameter 2½" 3" 4" A minimum 63/16" 77/16" 81/16" B minimum 615/16" 813/16" 107/16" C minimum 27/16" 27/16" 27/16" ProPress XL-C Rings Clearance A Tube Diameter 2½" 3" 4" A minimum 4 4" 5" B minimum 6" 7" 8" C minimum 4½" 4" 5¾" B B A Tube Diameter 2½" 3" 4" A minimum 4" 4" 5" B minimum 6" 7" 8" 18 PG-PP 724604 1219 ProPress Systems Technical Information Pressing with Ring and Actuator in Tight Quarters 1. Wrap the actuator ring around the press fitting with the opening facing away from you. 2. Close the actuator tight around the fitting. 3. Rotate the actuator ring until the press jaw receptacle is facing toward you. 4. Properly insert press jaws and begin the press fitting procedure. PG-PP 724604 1219 ProPress Systems 19 Notes 20 PG-PP 724604 1219 ProPress Systems Dimensional Documentation ProPress Fittings ½" to 4" ProPress Fittings ½" to 4" Viega ProPress 90° Elbow Copper P x P - Model 2916 " " - 1 Part No. 77317 77022 77027 77032 77037 77042 Size (in) 1 1 ½ x ½ ¾ x ¾ 1 x 1 1¼ x 1¼ 1½ x 1½ 2x 2 A (in) 0.75 0.76 1.28 1.28 1.29 2.16 L (in) 1.50 1.67 2.19 2.31 2.72 3.74 Viega ProPress 90° Elbow P x P - Model 0916XL " " - Part No. 20623 20628 20633 Size (in) 1 1 2½ x 2½ 3 x 3 4 x 4 A (in) 3.19 3.76 4.90 L (in) 4.88 5.73 7.26 Viega ProPress 90° Street Elbow Copper P x FTG - Model 2916.1 "- Part No. Size (in) 77347 1 2 ½ x ½ 77052 ¾ x ¾ 77057 1 x 1 77062 1¼ x 1¼ 77067 1½ x 1½ 77072 2x 2 A (in) 0.75 0.76 1.28 1.28 1.29 2.16 L (in) 1.50 1.67 2.19 2.31 2.72 3.74 L1 (in) 1.54 1.83 2.27 2.48 2.80 3.78 Viega ProPress 90° Street Elbow P x FTG - Model 0916.1XL " Part No. Size (in) A (in) 1 2 20638 2½ x 2½ 3.19 20643 3 x 3 3.76 - 20648 4 x 4 4.90 L (in) 4.88 5.73 7.26 L1 (in) 4.80 5.63 7.13 Viega ProPress 90° Reducing Elbow Copper P x P - Model 2916.3 " Part No. 77325 77330 Size (in) 1 2 ¾ x ½ 1 x ¾ A (in) 0.91 1.20 A1 (in) 0.94 1.30 L (in) 1.81 2.11 " - L1 (in) 1.69 2.21 22 PG-PP 724604 1219 ProPress Systems ProPress Fittings ½" to 4" Viega ProPress 90° Extended Street Elbow Copper P x FTG - Model 2947 Part No. Size (in) A (in) L (in) L1 (in) - 1 2 " 77353 ¾ x ¾ 1.02 1.93 5.98 - Viega ProPress 90° Elbow Zero Lead Bronze P x FPT - Model 2914.2ZL L1 A1 2 A L 1 Part No. Size (in) 1 2 79520 ½ x FPT 79525 ½ x ½ FPT 79530 ½ x ¾ FPT 79535 ¾ x ½ FPT 79540 ¾ x ¾ FPT 79545 1 x ½ FPT 79550 1 x 1 FPT 79560 1¼ x 1¼ FPT 79565 1½ x 1½ FPT 79570 2 x 2 FPT A (in) 0.94 0.94 1.06 1.06 1.06 1.06 1.34 1.54 1.69 2.17 A1 (in) 0.42 0.57 0.51 0.65 0.57 0.72 0.76 0.89 1.05 1.35 L (in) 1.77 1.77 1.89 1.97 1.97 1.97 2.24 2.56 3.11 3.74 L1 (in) 0.83 1.10 1.06 1.18 1.12 1.26 1.42 1.57 1.73 2.05 Viega ProPress Vent Elbow Zero Lead Bronze P x P x FPT - Model 2917.3ZL L1 A1 1 2 Part No. Size (in) A (in) A1 (in) A2 (in) L (in) L1 (in) L2 (in) 1 2 3 79635 ½ x ½ x FPT 0.67 0.67 0.44 1.50 1.50 0.71 79640 ¾ x ¾ x FPT 0.83 0.83 0.54 1.73 1.73 0.81 3 A L A2 L2 Viega ProPress 90° Hi Ear Elbow Zero Lead Bronze P x FPT - Model 2925.2ZL L1 A1 L2 2 Part No. Size (in) 1 2 79205 ½ x ½ FPT A (in) A1 (in) L (in) L1 (in) L2 (in) 0.94 0.57 1.77 1.10 1.07 A L 1 PG-PP 724604 1219 ProPress Systems 23 ProPress Fittings ½" to 4" Viega ProPress 90° Drop Ear Elbow Zero Lead Bronze P X FPT - Model 2925.5ZL L3 L2 Part No. Size (in) A (in) L (in) L1 (in) L2 (in) L3 (in) 1 2 L1 79185 ½ x FPT 0.94 1.77 0.74 0.83 0.67 A 2 79190 ½ x ½ FPT 0.94 1.77 0.74 1.10 0.67 L 79195 ¾ x ¾ FPT 1.06 1.97 0.83 1.12 0.83 1 Viega ProPress Double Drop Elbow Zero Lead Bronze P x P x FPT - Model 2928.7ZL L4 L3 L2 3 A L 1 2 L1 Part No. 78800 78802 78801 78803 Size (in) 1 2 3 ½ x ½ x ½ FNPT ¾ x ¾ x ½ FNPT ¾ x ¾ x ¾ FNPT 1 x 1 x ½ FNPT A (in) 1.34 1.54 1.54 1.77 L (in) 2.17 2.44 2.44 2.68 L1 (in) L2 (in) L3 (in) L4 (in) 1.97 1.10 0.67 1.57 1.97 1.10 0.83 2.05 1.97 1.12 0.83 1.89 2.36 1.10 0.87 2.52 Viega ProPress 45° Elbow Copper P x P - Model 2926 " - " Part No. 77607 77023 77028 77033 77038 77043 Size (in) 1 1 ½ x ½ ¾ x ¾ 1 x 1 1¼ x 1¼ 1½ x 1½ 2x 2 A (in) 0.30 0.36 0.47 0.58 0.65 0.86 L (in) 1.04 1.26 1.38 1.61 2.08 2.44 Viega ProPress 45° P x P - Model 0926XL - " " - Part No. 20653 20658 20663 Size (in) 1 1 2½ x 2½ 3 x 3 4 x 4 A (in) 1.48 1.73 1.96 L (in) 3.18 3.70 4.63 24 PG-PP 724604 1219 ProPress Systems ProPress Fittings ½" to 4" Viega ProPress 45° Street Elbow Copper P x FTG - Model 2926.1 " Part No. Size (in) 1 2 A (in) - 77637 ½ x ½ 0.31 77053 ¾ x ¾ 0.36 77058 1 x 1 0.47 77063 1¼ x 1¼ 0.58 77068 1½ x 1½ 0.65 77073 2x 2 0.86 L (in) 1.06 1.26 1.38 1.61 2.08 2.44 L1 (in) 1.10 1.30 1.49 1.67 2.04 2.54 Viega ProPress 45° Street Elbow P x FTG - Model 0926.1XL - " Part No. 20668 20673 20678 Size (in) 1 2 2½ x 2½ 3 x 3 4 x 4 A (in) 1.48 1.73 2.23 L (in) 3.18 3.70 4.59 L1 (in) 3.10 3.60 4.45 Viega ProPress Tee Copper P x P x P - Model 2918 - " " " - Part No. Size (in) 1 2 3 77377 ½ x ½ x ½ 77382 ½ x ½ x ¾ 15493 ½ x ½ x 1 77387 ¾ x ¾ x ¾ 77392 ¾ x ½ x ½ 77397 ¾ x ½ x ¾ 77402 ¾ x ¾ x ½ 77407 ¾ x ¾ x 1 77412 1 x 1 x 1 22263 1 x ½ x ¾ 94767 1 x ½ x 1 77417 1 x ¾ x ½ 77422 1 x ¾ x ¾ 77427 1 x ¾ x 1 77432 1 x 1 x ½ 77437 1 x 1 x ¾ 15488 1 x 1 x 1 ¼ Continued on next page A (in) 0.75 0.91 1.10 0.85 0.69 0.85 0.69 0.97 0.97 0.85 0.97 0.69 0.85 0.97 0.69 0.85 1.16 A1 (in) A2 (in) 0.75 0.50 0.91 0.59 1.10 0.55 0.85 0.59 0.98 0.63 1.14 0.59 0.69 0.63 0.97 0.63 0.97 0.79 1.24 0.75 1.52 0.79 0.89 0.79 1.04 0.75 1.18 0.78 0.69 0.79 0.85 0.75 1.16 0.84 L (in) 1.50 1.65 1.85 1.75 1.59 1.75 1.59 1.87 1.87 1.76 1.87 1.59 1.75 1.87 1.59 1.75 2.07 L1 (in) 1.50 1.65 1.85 1.75 1.73 1.89 1.59 1.87 1.87 1.99 2.26 1.79 1.95 2.07 1.59 1.75 2.07 L2 (in) 1.25 1.50 1.46 1.50 1.38 1.50 1.38 1.54 1.69 1.66 1.69 1.54 1.65 1.69 1.54 1.65 1.87 PG-PP 724604 1219 ProPress Systems 25 ProPress Fittings ½" to 4" Viega ProPress Tee Copper P x P x P - Model 2918 - " " " - Continued from previous page Part No. Size (in) 1 2 3 77442 1¼ x 1¼ x 1¼ 22253 1¼ x ½ x 1¼ 22243 1¼ x ¾ x ½ 22258 1¼ x ¾ x ¾ 22268 1¼ x ¾ x 1 22248 1¼ x ¾ x 1¼ 22238 1¼ x 1 x ½ 94762 1¼ x 1 x ¾ 14568 1¼ x 1 x 1 94757 1¼ x 1¼ x ½ 77452 1¼ x 1¼ x ¾ 77447 1¼ x 1¼ x 1 77457 1½ x 1½ x 1½ 79660 1½ x 1 x ¾ 15458 1½ x 1 x 1 15463 1½ x 1 x 1½ 22233 1½ x 1¼ x ¾ 15453 1½ x 1¼ x 1 15483 1½ x 1¼ x 1¼ 15448 1½ x 1½ x ½ 77462 1½ x 1½ x ¾ 77467 1½ x 1½ x 1 77472 1½ x 1½ x 1¼ 77477 2 x 2 x 2 15518 2 x 1¼ x 1¼ 15513 2 x 1½ x ¾ 15498 2 x 1½ x 1 15508 2 x 1½ x 1¼ 15503 2 x 1½ x 1½ 22228 2 x 1½ x 2 15538 2 x 2 x ½ 94777 2 x 2 x ¾ 94772 2 x 2 x 1 77487 2 x 2 x 1¼ 77482 2 x 2 x 1½ A (in) A1 (in) A2 (in) L (in) L1 (in) L2 (in) 1.02 1.02 0.64 0.76 0.88 1.02 0.64 0.76 0.88 0.65 0.77 0.88 1.13 0.67 0.74 1.13 0.67 0.74 0.86 0.47 0.66 0.74 0.86 1.37 0.94 0.70 0.82 0.94 1.13 1.38 0.54 0.79 0.91 1.04 1.13 1.02 1.77 1.13 1.30 1.40 1.54 0.91 1.14 1.28 0.65 0.77 0.88 1.13 1.39 1.54 1.83 1.08 1.29 1.33 0.47 0.66 0.74 0.86 1.37 1.84 1.25 1.45 1.55 1.65 1.89 0.54 0.79 0.91 1.04 1.13 0.86 0.87 0.93 0.87 0.91 0.86 0.93 0.87 0.91 0.93 0.89 0.90 1.13 1.16 1.06 1.13 1.15 1.18 1.13 1.10 1.14 1.18 1.13 1.37 1.33 1.38 1.38 1.49 1.37 1.38 1.30 1.26 1.30 1.37 1.37 2.05 2.05 1.68 1.80 1.91 2.05 1.68 1.79 1.91 1.67 1.79 1.91 2.56 2.17 2.17 2.56 2.09 2.17 2.28 1.89 2.09 2.17 2.28 2.95 2.52 2.28 2.40 2.52 2.72 2.95 2.13 2.37 2.49 2.62 2.72 2.05 2.52 2.03 2.21 2.31 2.45 1.82 2.05 2.19 1.67 1.79 1.91 2.56 2.44 2.44 2.74 2.11 2.32 2.36 1.89 2.09 2.17 2.28 2.95 2.87 2.68 2.87 2.97 3.07 3.33 2.13 2.37 2.49 2.62 2.72 1.89 1.89 1.68 1.78 1.82 1.89 1.68 1.77 1.81 1.67 1.77 1.81 2.56 2.05 1.97 2.56 2.05 2.09 2.17 1.85 2.05 2.09 2.17 2.95 2.36 2.28 2.28 2.52 2.80 2.95 2.05 2.17 2.21 2.40 2.80 26 PG-PP 724604 1219 ProPress Systems ProPress Fittings ½" to 4" Viega ProPress Tee P x P x P - Model 0918XL - " " - " Part No. Size 1 23 20684 2½ x ¾ x 2½ 20689 2½ x 1 x 2½ 20694 2½ x 1¼ x 2½ 20699 2½ x 1½ x 2½ 20704 2½ x 2 x ¾ 20709 2½ x 2 x 1 22283 2½ x 2 x 1½ 22278 2½ x 2 x 2 20714 2½ x 2 x 2½ 22303 2½ x 2½ x ½ 22298 2½ x 2½ x ¾ 22293 2½ x 2½ x 1 22288 2½ x 2½ x 1¼ 20803 2½ x 2½ x 1½ 20688 2½ x 2½ x 2 20683 2½ x 2½ x 2½ 20719 3 x ¾ x 3 20724 3 x 1 x 3 20729 3 x 1¼ x 3 20727 3 x 1½ x 3 20732 3 x 2 x 2 20734 3 x 2 x 2½ 20739 3 x 2 x 3 20744 3 x 2½ x 2 20749 3 x 2½ x 2½ 20754 3 x 2½ x 3 20759 3 x 3 x ½ 22323 3 x 3 x ¾ 22308 3 x 3 x 1 22313 3 x 3 x 1¼ 20798 3 x 3 x 1½ 20698 3 x 3 x 2 20703 3 x 3 x 2½ 20693 3 x 3 x 3 20774 4 x 3 x 2 Continued on next page A (in) 1.83 1.83 1.83 1.83 1.04 1.04 1.30 1.50 1.83 0.91 0.91 1.04 1.16 1.30 1.54 1.83 2.07 2.07 2.07 2.07 1.56 1.85 2.07 1.56 1.85 2.07 0.93 0.93 1.06 1.18 1.32 1.56 1.85 2.07 1.59 A1 (in) A2 (in) 1.91 1.91 1.91 1.91 1.61 1.77 1.78 1.78 1.91 1.52 1.58 1.77 1.76 1.78 1.75 1.94 2.15 2.15 2.15 2.15 2.03 2.15 2.15 2.03 2.15 2.15 1.76 1.80 2.02 2.01 2.03 2.00 2.15 2.21 2.57 3.23 3.25 3.20 3.14 1.59 1.65 2.07 2.25 2.41 0.91 0.91 1.04 1.16 1.30 1.54 1.83 3.82 3.96 3.83 3.71 2.33 2.63 2.84 2.07 2.56 2.78 0.93 0.93 1.06 1.18 1.32 1.56 1.85 2.07 3.33 L (in) 3.52 3.52 3.52 3.52 2.74 2.74 2.99 3.19 3.52 2.60 2.60 2.74 2.85 2.99 3.23 3.52 4.04 4.04 4.04 4.04 3.52 3.82 4.04 3.52 3.82 4.04 2.89 2.89 3.03 3.15 3.29 3.52 3.82 4.04 3.96 L1 (in) L2 (in) 3.60 3.60 3.60 3.60 2.52 2.67 3.20 3.36 3.60 2.27 2.48 2.68 2.79 3.21 3.34 3.63 4.11 4.11 4.11 4.11 3.61 3.85 4.11 3.61 3.85 4.11 2.50 2.71 2.92 3.04 3.45 3.59 3.85 4.18 4.15 4.13 4.15 4.23 4.57 3.17 3.24 3.66 3.83 4.00 2.60 2.60 2.74 2.85 2.99 3.23 3.52 4.72 4.86 4.86 5.14 3.92 4.21 4.43 3.76 4.25 4.47 2.89 2.89 3.03 3.15 3.29 3.52 3.82 4.04 5.22 PG-PP 724604 1219 ProPress Systems 27 ProPress Fittings ½" to 4" Viega ProPress Tee P x P x P - Model 0918XL - " " - " Continued from previous page Part No. Size A (in) 1 23 20784 4 x 3 x 3 2.11 20788 4 x 4" x ½ 1.08 20793 4 x 4 x ¾ 1.08 20794 4 x 4 x 1 1.36 20795 4 x 4 x 1¼ 1.36 20808 4 x 4 x 1½ 1.36 20713 4 x 4 x 2 1.59 20718 4 x 4 x 2½ 1.89 20723 4 x 4 x 3 2.11 20708 4 x 4 x 4 2.60 A1 (in) A2 (in) 2.66 3.84 2.24 1.08 2.32 1.08 2.52 1.36 2.50 1.36 2.52 1.36 2.53 1.59 2.65 1.89 2.69 2.11 2.72 2.60 L (in) 4.47 3.45 3.45 3.72 3.72 3.72 3.96 4.25 4.47 4.96 L1 (in) L2 (in) 4.63 5.81 2.99 3.45 3.22 3.45 3.42 3.72 3.54 3.72 3.95 3.72 4.11 3.96 4.35 4.25 4.65 4.47 5.09 4.96 28 PG-PP 724604 1219 ProPress Systems ProPress Fittings ½" to 4" Viega ProPress Tee Zero Lead Bronze P x P x FPT - Model 2917.2ZL L1 A1 1 Part No. Size (in) 1 2 3 A (in) A1 (in) L (in) L1 (in) 79580 ½ x ½ x ½ FPT 0.79 0.69 1.61 1.30 L A 79585 ¾ x ¾ x ¼ FPT 0.67 0.79 1.57 1.18 79590 ¾ x ¾ x ½ FPT 0.79 0.88 1.69 1.42 3 79595 ¾ x ¾ x ¾ FPT 0.91 0.59 1.81 1.14 A 79760 1 x 1 x ½ FPT 0.79 1.04 1.69 1.57 L 79765 1 x 1 x ¾ FPT 0.91 1.06 1.81 1.61 79770 1¼ x 1¼ x ½ FPT 0.83 1.16 1.85 1.69 2 79775 1¼ x 1¼ x ¾ FPT 0.95 1.18 1.97 1.73 79780 1½ x 1½ x ½ FPT 0.87 1.24 2.28 1.77 79785 1½ x 1½ x ¾ FPT 0.94 1.30 2.36 1.85 79790 2 x 2 x ½ FPT 0.98 1.59 2.56 2.13 79795 2 x 2 x ¾ FPT 1.06 1.65 2.64 2.20 Viega ProPress Tee P x P x FPT - Model 0917.2XL - " " " - Part No. 20883 20878 20893 20888 20873 20868 Size 1 2 3 2½ x 2½ x ¾ FPT 2½ x 2½ x 2 FPT 3 x 3 x ¾ FPT 3 x 3 x 2 FPT 4 x 4 x ¾ FPT 4 x 4 x 2 FPT A (in) 1.02 1.54 1.04 1.56 1.08 1.59 A1 (in) 1.78 1.90 2.03 2.16 2.53 2.69 L (in) 2.72 3.23 3.01 3.52 3.34 3.96 L1 (in) 2.34 2.60 2.59 2.85 3.09 3.38 Viega ProPress Adapter Zero Lead Bronze P x MPT - Model 2911ZL 1 2 A L Part No. 79210 79215 79220 79225 79230 79235 79240 79245 79250 79255 79260 79265 79270 79275 79280 79285 79290 Size (in) 1 2 ½ x MPT ½ x ½ MPT ½ x ¾ MPT ¾ x ½ MPT ¾ x ¾ MPT ¾ x 1 MPT 1 x ¾ MPT 1 x 1 MPT 1 x 1¼ MPT 1¼ x 1 MPT 1¼ x 1¼ MPT 1¼ x 1½ MPT 1½ x 1¼ MPT 1½ x 1½ MPT 1½ x 2 MPT 2 x 1½ MPT 2 x 2 MPT A (in) 0.77 0.89 1.00 1.02 1.02 1.18 1.18 1.26 1.54 1.22 1.34 1.48 1.34 1.28 1.65 1.54 1.50 L (in) 1.59 1.71 1.83 1.93 1.93 2.09 2.09 2.17 2.44 2.24 2.36 2.50 2.76 2.70 3.07 3.11 3.07 PG-PP 724604 1219 ProPress Systems 29 ProPress Fittings ½" to 4" Viega ProPress Adapter P x MPT - Model 0911XL Part No. Size (in) 1 2 20823 2½ x 2½ MPT " - 20828 20838 3 x 3 MPT 4 x 4 MPT A (in) 2.76 2.84 3.10 L (in) 4.45 4.80 5.46 Viega ProPress Adapter Zero Lead Bronze FTG x MPT - Model 2911.1ZL 1 2 L Part No. 79375 79380 79385 79390 79395 79400 79405 79410 79415 79420 Size (in) 1 2 ½ x MPT ½ x ½ MPT ½ x ¾ MPT ¾ x ½ MPT ¾ x ¾ MPT 1 x ¾ MPT 1 x 1 MPT 1¼ x 1¼ MPT 1½ x 1½ MPT 2 x 2 MPT L (in) 1.75 1.95 2.05 1.93 2.05 2.05 2.22 2.54 2.89 3.33 Viega ProPress Adapter Zero Lead Bronze P x FPT - Model 2912ZL Part No. Size (in) A (in) 1 2 1 2 79295 ½ x FPT 0.19 79300 ½ x ½ FPT 0.25 A 79305 ½ x ¾ FPT 0.27 L 79310 ¾ x ½ FPT 0.33 79315 ¾ x ¾ FPT 0.35 79320 1 x ½ FPT 0.41 79325 1 x ¾ FPT 0.39 79330 1 x 1 FPT 0.44 79335 1 x 1¼ FPT 0.50 79340 1¼ x ½ FPT 0.37 79345 1¼ x 1 FPT 0.24 79350 1¼ x 1¼ FPT 0.34 79355 1¼ x 1½ FPT 0.42 79360 1½ x 1¼ FPT 0.26 79365 1½ x 1½ FPT 0.34 79370 2 x 2 FPT 0.41 L (in) 1.42 1.61 1.65 1.77 1.81 1.85 1.85 2.01 2.09 1.93 1.93 2.05 2.13 2.36 2.44 2.68 30 PG-PP 724604 1219 ProPress Systems ProPress Fittings ½" to 4" Viega ProPress Adapter P x FPT - Model 0912XL Part No. Size (in) 1 2 20819 2½ x 2½ FPT 20829 3 x 3 FPT " 20839 4 x 4 FPT - A (in) 1.53 1.84 2.09 L (in) 4.15 4.82 5.55 Viega ProPress Adapter Zero Lead Bronze FTG x FPT - Model 2912.1ZL 1 A L Part No. Size (in) A (in) 2 1 2 79425 ½ x FPT 1.10 79430 ½ x ½ FPT 1.22 79435 ½ x ¾ FPT 1.30 79440 ¾ x ½ FPT 1.26 79445 ¾ x ¾ FPT 1.28 79455 1 x ½ FPT 1.35 79450 1 x 1 FPT 1.33 79460 1¼ x ½ FPT 1.65 79465 1¼ x 1¼ FPT 1.50 79470 1½ x 1½ FPT 1.88 79475 2 x 2 FPT 2.13 L (in) 1.54 1.75 1.83 1.79 1.83 1.99 1.99 2.19 2.19 2.56 2.95 Viega PEX Press Adapter Zero Lead Bronze P x P - Model 2813PZL " - Part No. 99620 99626 99630 99640 99645 99660 99665 99670 66675 99680 99685 99690 Size (in) 1 2 ½ x ½ ½ x ¾ ¾ x ½ ¾ x ¾ 1 x ¾ 1 x 1 1¼ x 1 1¼ x 1¼ 1½ x 1 1½ x 1½ 2 x 1 2 x 2 A (in) 0.29 0.43 0.23 0.33 0.35 0.45 0.49 0.49 0.59 0.59 0.73 0.59 L (in) 1.61 1.83 1.56 1.73 1.87 1.97 2.26 2.38 2.36 2.87 2.68 3.21 PG-PP 724604 1219 ProPress Systems 31 ProPress Fittings ½" to 4" Viega ProPress Adapter Flange Zero Lead Bronze P x Flange - Model 2959.5ZL %L E C " - Part No. 79680 79685 79690 79695 Size (in) 1 1 1¼ 1½ 2 A (in) 1.85 1.73 1.65 2.09 L (in) 2.76 2.76 3.07 3.66 b (in) 0.84 0.84 0.84 0.84 D (in) 4.33 4.53 4.92 5.91 k (in) 3.11 3.50 3.86 4.76 d (in) 0.63 0.63 0.63 0.75 Viega ProPress Adapter Flange P x Flange - Model 0959.5XL " %L E C Part No. 20853 20858 Size (in) 1 2½ 3 A (in) 1.09 1.20 L (in) 2.79 3.17 b (in) 0.70 0.79 k (in) 5.51 5.98 D (in) 7.09 7.48 d (in) 0.75 0.75 32 PG-PP 724604 1219 ProPress Systems ProPress Fittings ½" to 4" Viega ProPress Adapter Flange P x Flange - Model 0959.5XL " %L E C Part No. 20863 Size (in) 1 4 A (in) 1.29 L (in) 3.66 b (in) 0.86 k (in) 7.52 D (in) 9.06 d (in) 0.75 Viega ProPress Cap Copper P - Model 2956 " - Part No. 77712 77717 77722 77727 77732 77737 Size (in) 1 ½ ¾ 1 1¼ 1½ 2 A (in) 0.79 0.94 0.99 1.20 1.49 1.69 L (in) 0.92 1.07 1.11 1.32 1.62 1.81 Viega ProPress Cap P - Model 0956XL L A 1 Part No. Size 1 20833 2½ 20843 3 20848 4 A (in) 0.39 0.39 0.39 L (in) 2.11 2.36 2.76 Viega ProPress Union Zero Lead Bronze P x P - Model 2960ZL Part No. Size (in) A (in) 1 79125 ½ 1.19 " - 79130 ¾ 1.34 79135 1 1.83 79140 1¼ 1.64 79145 1½ 2.13 79150 2 2.07 L (in) 2.84 3.15 3.65 3.69 4.96 5.22 PG-PP 724604 1219 ProPress Systems 33 ProPress Fittings ½" to 4" Viega ProPress Union Zero Lead Bronze P x FPT - Model 2962ZL " Part No. Size (in) A (in) 1 2 79700 ½ x ½ FPT 0.91 79705 ¾ x ¾ FPT 0.96 79710 1 x 1 FPT 1.31 79715 1¼ x 1¼ FPT 1.27 79720 1½ x 1½ FPT 1.77 79725 2 x 2 FPT 1.65 L (in) 2.27 2.42 2.88 2.97 3.87 3.92 Viega ProPress Union Zero Lead Bronze P x MPT - Model 2965ZL Part No. Size (in) A (in) 1 2 79730 ½ x ½ MPT 1.86 79735 ¾ x ¾ MPT 2.00 " 79740 1 x 1 MPT 2.54 - 79745 1¼ x 1¼ MPT 2.49 79750 1½ x 1½ MPT 3.05 79755 2 x 2 MPT 2.99 L (in) 2.69 2.90 3.45 3.52 4.47 4.57 Viega ProPress Dielectric Union Zero Lead Bronze P x FPT - Model 2967ZL Part No. Size (in) A (in) 1 2 1 2 79155 ½ x ½ FPT 0.88 79160 ¾ x ¾ FPT 1.11 79165 1 x 1 FPT 1.00 A 79170 1¼ x 1¼ FPT 0.97 L 79175 1½ x 1½ FPT 1.01 79180 2 x 2 FPT 1.26 L (in) 2.24 2.57 2.57 2.68 3.11 3.53 Viega ProPress Tailpiece Zero Lead Bronze P x F BSP - Model 2957ZL Part No. Size (in) A (in) 1 2 79800 ½ x 1 BSP 0.39 79805 ¾ x 1 BSP 0.63 79810 1 x 1 BSP 0.91 " 79815 1 x 1¼ BSP 0.73 - L (in) 1.57 1.87 2.14 2.04 34 PG-PP 724604 1219 ProPress Systems ProPress Fittings ½" to 4" Viega ProPress Coupling with Stop Copper P x P - Model 2915 Part No. Size (in) 78047 1 1 ½ x ½ 78052 ¾ x ¾ " - 78057 1 x 1 78062 1¼ x 1¼ 78067 1½ x 1½ 78072 2 x 2 A (in) 0.12 0.20 0.16 0.14 0.14 0.14 L (in) 1.61 2.01 1.97 2.20 2.99 3.31 Viega ProPress Coupling with Stop P x P - Model 0915XL Part No. Size (in) 1 1 20728 2½ x 2½ " - 20733 20738 3 x 3 4 x 4 A (in) 0.95 0.98 1.06 L (in) 4.33 4.92 5.79 Viega ProPress Coupling No Stop Copper P x P - Model 2915.3 - Part No. 78172 78177 78182 78187 78192 78197 Size (in) 1 1 ½ x ½ ¾ x ¾ 1 x 1 1¼ x 1¼ 1½ x 1½ 2x 2 L (in) 1.61 2.01 1.97 2.20 2.99 3.31 Viega ProPress Extended Coupling Copper P x P - Model 2915.5 Part No. - 79005 79010 79015 79020 79025 79030 Size (in) 1 1 ½ x ½ ¾ x ¾ 1 x 1 1¼ x 1¼ 1½ x 1½ 2x 2 L (in) 2.99 3.50 3.74 4.13 4.72 5.31 Viega ProPress Coupling No Stop P x P - Model 0915.5XL - Part No. 20743 20748 20753 Size (in) 1 1 2½ x 2½ 3 x 3 4 x 4 PG-PP 724604 1219 ProPress Systems L (in) 4.33 4.92 5.79 35 ProPress Fittings ½" to 4" Viega ProPress Reducer Copper P x P - Model 2915.2 Part No. Size (in) 1 2 78147 ¾ x ½ 15603 1 x ½ " 78152 1 x ¾ - 15593 1¼ x ¾ 78157 1¼ x 1 18473 1½ x ¾ 15588 1½ x 1 78162 1½ x 1¼ 18468 2 x ¾ 15608 2 x 1 22328 2 x 1¼ 78167 2 x 1½ A (in) 0.42 0.71 0.48 0.70 0.55 0.98 0.74 0.50 1.54 1.29 0.81 0.74 Viega ProPress Reducer P x P - Model 0915.2XL Part No. Size (in) 1 2 20685 2½ x 1 20690 2½ x 1¼ " 20695 2½ x 1½ - 20700 2½ x 2 20705 3 x 1½ 20710 3 x 2 20715 3 x 2½ 20720 4 x 2 20725 4 x 2½ 20730 4 x 3 A (in) 1.76 1.61 1.52 1.41 1.78 1.53 1.41 2.06 1.93 1.70 Viega ProPress Reducer Copper FTG x P - Model 2915.1 Part No. Size (in) A (in) 1 2 78077 ¾ x ½ 1.42 " 78082 1 x ½ 1.69 - 78087 1 x ¾ 1.42 22333 1¼ x ½ 1.91 78092 1¼ x ¾ 1.85 78097 1¼ x 1 1.57 14543 1½ x ¾ 2.56 78102 1½ x 1 2.28 78107 1½ x 1¼ 2.04 78112 2 x 1 3.03 78117 2 x 1¼ 2.79 78122 2 x 1½ 2.63 L (in) 2.07 2.36 2.29 2.64 2.48 3.33 3.07 2.96 4.02 3.78 3.43 3.75 L (in) 4.36 4.34 4.64 4.69 5.17 5.08 5.07 6.00 5.99 6.03 L (in) 2.17 2.44 2.32 2.74 2.76 2.48 3.46 3.19 3.07 3.94 3.82 4.06 36 PG-PP 724604 1219 ProPress Systems ProPress Fittings ½" to 4" Viega ProPress Reducer Zero Lead Bronze FTG x P - Model 2915.1ZL Part No. Size (in) A (in) 1 2 79850 1½ x ½ 1.95 79855 2 x ½ 2.38 " 79860 2 x ¾ 2.42 - L (in) 2.78 3.21 3.33 Viega ProPress Reducer FTG x P - Model 0915.1XL Part No. Size (in) 1 2 20814 2½ x 1 " 20815 2½ x 1¼ - 20813 2½ x 1½ 20758 2½ x 2 20817 3 x 1¼ 20818 3 x 1½ 20763 3 x 2 20768 3 x 2½ 20773 4 x 2 20778 4 x 2½ 20783 4 x 3 A (in) 3.61 3.47 3.41 2.35 3.96 3.91 2.98 2.76 4.58 4.45 4.17 L (in) 4.52 4.51 4.84 3.94 5.00 5.34 4.57 4.45 6.17 6.15 6.14 Viega ProPress Venturi Insert Zero Lead Bronze - Model 2911.5ZL L A A2 Part No. Size (in) 1 2 Flow 1 78810 1¼ x 1¼ 2 78811 1½ x 1½ 78812 2 x 2 A (in) 1.02 1.43 1.58 A2 (in) 1.60 2.10 2.45 L (in) 3.07 3.98 4.48 PG-PP 724604 1219 ProPress Systems 37 ProPress Fittings ½" to 4" Viega ProPress Ball Valve Zero Lead Bronze P x P - Model 2971.1ZL - ) " - Part No. 79920 79925 79930 79935 " - Size 1 1 ½ x ½ ¾ x ¾ 1 x 1 1¼ x 1¼ A (in) A1 (in) L (in) L1 (in) L2 (in) H (in) 0.75 0.75 1.57 1.57 4.57 1.97 0.85 0.87 1.75 1.77 4.57 2.09 1.02 1.06 1.93 1.96 5.75 2.46 1.14 1.12 2.17 2.15 5.75 2.67 Viega ProPress Ball Valve Zero Lead Bronze P x P - Model 2970.1ZL - ) " - Part No. 79115 79120 " - Size 1 1 1½ x 1½ 2 x 2 A (in) A1 (in) L (in) L1 (in) L2 (in) H (in) 1.50 1.39 2.91 2.80 6.12 3.36 1.77 1.83 3.35 3.41 6.12 3.67 38 PG-PP 724604 1219 ProPress Systems ProPress Fittings ½" to 4" Viega ProPress Ball Valve Zero Lead Bronze P x P - Model 2970.1ZL - ) " - Part No. 79115 79120 " - Size 1 1 1½ x 1½ 2 x 2 A (in) A1 (in) L (in) L1 (in) L2 (in) H (in) 1.50 1.39 2.91 2.80 6.12 3.36 1.77 1.83 3.35 3.41 6.12 3.67 Viega ProPress Ball Valve Zero Lead Bronze P x P - Model 2971.3ZL - ) " - Part No. 79923 79928 79933 79938 " - Size 1 1 ½ x ½ ¾ x ¾ 1 x 1 1¼ x 1¼ A (in) A1 (in) L (in) L1 (in) L2 (in) H (in) 0.75 0.75 1.57 1.57 4.57 1.97 0.85 0.87 1.75 1.77 4.57 2.09 1.02 1.06 1.93 1.96 5.75 2.46 1.14 1.12 2.17 2.15 5.75 2.67 PG-PP 724604 1219 ProPress Systems 39 ProPress Fittings ½" to 4" Viega ProPress Ball Valve Zero Lead Bronze P x P - Model 2970.3ZL - ) " - " - Part No. 79840 79845 Size 1 1 1½ x 1½ 2 x 2 A (in) A1 (in) L (in) L1 (in) L2 (in) H (in) 1.50 1.39 2.91 2.80 6.12 3.36 1.77 1.83 3.35 3.41 6.12 3.67 Viega ProPress Ball Valve Zero Lead Bronze P x FPT - Model 2971.4ZL - ) '15 " - " - Part No. 79970 79975 79980 Size 1 x FPT ½ x ½ ¾ x ¾ 1 x 1 A (in) A1 (in) L (in) L1 (in) L2 (in) H (in) 0.73 0.66 1.57 1.20 4.57 1.97 0.85 0.79 1.75 1.35 4.57 2.09 1.02 0.98 1.93 1.63 5.75 2.46 40 PG-PP 724604 1219 ProPress Systems ProPress Fittings ½" to 4" Viega ProPress Ball Valve Zero Lead Bronze P x Hose - Model 2971.6ZL - ) )PTF " - " - Part No. 79875 79876 Size 1 x Hose ½ x ¾ GH ¾ x ¾ GH A (in) A1 (in) L (in) L1 (in) L2 (in) H (in) 0.75 0.79 1.57 1.56 4.57 1.99 0.85 0.79 1.75 1.56 4.57 2.10 Viega ProPress Ball Valve Bronze/Brass P x P - Model 2973 - ) " " - - Part No. 24000 24005 24010 24015 24020 24025 Size (in) 1 1 ½ x ½ ¾ x ¾ 1 x 1 1¼ x 1¼ 1½ x 1½ 2 x 2 A (in) 0.83 0.95 1.18 1.29 1.39 1.85 A1 (in) 0.83 0.95 1.18 1.29 1.39 1.85 L (in) 1.58 1.86 2.09 2.31 2.81 3.43 L1 (in) 1.58 1.86 2.09 2.31 2.81 3.43 L2 (in) 3.94 4.72 4.72 6.22 6.22 6.22 H (in) 1.69 1.97 2.13 2.87 3.11 3.46 PG-PP 724604 1219 ProPress Systems 41 ProPress Fittings ½" to 4" Viega ProPress Ball Valve Bronze/Brass P x FPT - Model 2973.1 - ) '15 " - " - Part No. 24030 24035 24040 Size (in) 1 x FPT ½ x ½ ¾ x ¾ 1 x 1 A (in) 0.83 0.95 1.18 A1 (in) 0.63 0.70 0.93 L (in) 1.58 1.86 2.09 L1 (in) 1.16 1.26 1.59 L2 (in) 3.94 4.72 4.72 H (in) 1.69 1.97 2.13 Viega ProPress Ball Valve Bronze/Brass P x Hose - Model 2973.3 - ) )PTF " - " - Part No. 24090 24095 Size (in) 1 x Hose ½ x ¾ ¾ x ¾ A (in) 0.83 0.95 A1 (in) 0.85 0.94 L (in) 1.58 1.86 L1 (in) 1.30 1.39 L2 (in) 3.89 4.72 H (in) 1.67 1.97 Viega ProPress Check Valve Zero Lead Bronze P x P - Model 2974ZL Part No. 79035 " - 79040 79045 79050 79055 79060 Size 1 1 ½ x ½ ¾ x ¾ 1 x 1 1¼ x 1¼ 1½ x 1½ 2 x 2 A (in) 0.87 1.14 1.34 1.69 2.09 2.56 L (in) 2.52 2.95 3.15 3.74 4.92 5.71 42 PG-PP 724604 1219 ProPress Systems ProPress Fittings ½" to 4" Butterfly Valve - Model 2873.81 " ( # $ ' % & Part No. Size (in) A (in) 22074 2½ 6.50 22075 3 7.28 * ) B (in) C (in) D (in) 7.40 2.17 0.43 7.64 2.80 0.67 E (in) 1.81 1.81 F (in) 2.64 2.82 G (in) H (in) 5.35 5.20 5.59 7.01 I (in) 5.51 5.98 Butterfly Valve - Model 2873.81 " # ( $ ' * * % & ) Part No. Size (in) A (in) B (in) C (in) D (in) E (in) F (in) G (in) H (in) I (in) 22076 4 9.06 8.47 3.54 0.91 2.05 3.62 6.42 8.27 7.48 Viega ProPress Cross-Over Copper P x P - Model 2928 Part No. Size (in) A (in) L (in) ) 1 1 " - 77742 ½ x ½ 3.62 5.12 77747 ¾ x ¾ 4.49 6.30 H (in) 0.77 0.90 PG-PP 724604 1219 ProPress Systems 43 Frequently Asked Questions Q What does "Zero Lead" mean? A "Zero Lead" identifies Viega products meeting the lead-free requirements of the federal amendment to the Safe Drinking Water Act effective January 4th, 2014. Q What does "Lead Free" mean? A The Reduction of Lead in Drinking Water Act defines "Lead Free" as materials containing not more than 0.2 percent lead when used with respect to solder and flux and not more than a weighted average of 0.25 percent when used with respect to the wetted surfaces of pipes and pipe fittings, plumbing fittings and fixtures, providing a specified definition and formula for determining "weighted average." Q What is NSF-61? A NSF-61 requires wetted parts to be evaluated per NSF-372 and meet a 0.25% weighted average lead content standard. Only products certified to zero lead standards (NSF-61 or NSF-372) can be used in potable water systems. This is in addition to NSF-61 certification. Q What is a wetted surface? A "Wetted surface" refers to any and all parts of a valve or fitting that are directly in contact with potable water. Are Viega ProPress valves and Q fittings "Lead Free"? Yes. Viega ProPress fittings and A valves are available with Zero Lead and are listed to NSF/ANSI 61 and 372. What materials are used to produce Q Viega ProPress Zero Lead fittings? Viega ProPress Zero Lead bronze A fittings are constructed of: UNS C87710 and UNS C87700. What is the procedure for soldering Q near a Viega ProPress connection? When soldering near a Viega A ProPress connection, you must remain at least three pipe diameters away from the connection. If three pipe diameters are not possible, the installer should take proper precautions to keep the Viega ProPress connection cool while soldering. These include: wrapping the connection with a cold wet rag; fabricating solder connections prior to installing the pressed fitting; making sure the pipe has cooled before installing the fitting; applying "spray type" spot freezing product. How would inspectors know they Q are looking at a good connection? Good connections can be proven A by performing a pressure test. This is the same procedure for solder connections. What is the lubrication used on the Q sealing elements? The sealing elements are lubricated A with an H1 food grade, silicone- based lubricant registered with NSF and the USDA. If it is necessary to lubricate the seals in the field, use water only. Do not use other lubricants, especially any petroleum-based lubricants, as petroleum and EPDM are incompatible. Q How long will the EPDM seal last? A When properly installed, the EPDM seal and connection will last as long as the copper pipe that joins it, 50 years. How do I fabricate a system in tight Q places when using Viega ProPress? If necessary, pre-fabricate A connections that are in tight places and then install. PG-PP 724604 1219 ProPress Systems 44 Frequently Asked Questions What is the warranty for Viega Q ProPress? Viega ProPress fittings installed A in non-industrial, non-marine environments carry a 50-year warranty against defects in material and workmanship from Viega. RIDGID Tools carry a lifetime warranty to be free from defects in workmanship and material. Q Can you turn a pressed fitting without damaging the integrity of Athe connection? Yes. The fitting can be turned, although not by hand, and will not affect the integrity of the connection. As a general rule of thumb, if the fitting is turned more than 5° it should be re-pressed to restore the resistance to rotational movement. Q How do Viega ProPress connections hold up to freezing Atemperatures? Copper water systems, both soldered and pressed, should not be allowed to freeze. When water freezes it expands and will damage the pipe or the system. Can a user solder the female "P" Q end of a Viega ProPress fitting? This is not a recommended practice A and constitutes improper use of the product, voiding any product warranties. The recessed groove that normally houses the EPDM seal will interfere with the capillary action that normally draws solder into and around the tubing. What are the flow rates through Q Viega ProPress fittings? Flow rates and flow rate A calculations are the same as those used for solder fitting installations. The friction loss allowance table can be found in the Viega ProPress Installation Manual. What should a user do if a Viega Q ProPress system leaks? In general, Viega ProPress fittings A only leak due to one of three reasons: the fitting was never pressed, the copper tubing was not properly inserted or the pressing jaws were not properly aligned. If the fitting was never pressed, confirm that the tubing is fully inserted and proceed with pressing. If the copper tubing was not properly inserted, cut out the fitting and reinstall properly. If the pressing jaws were not properly aligned, cut out the fitting and reinstall properly. If problems persist, be sure to contact Viega immediately. Q Is Viega ProPress compatible with the cleaning agents used to Adisinfect a new plumbing system? Yes, ProPress is compatible with system disinfection per model plumbing codes. For disinfection using other concentrations or contact times, contact a Viega District Manager or Technical Support. PG-PP 724604 1219 ProPress Systems 45 Notes 46 PG-PP 724604 1219 ProPress Systems Limited Warranty Viega ProPress Fittings and Valves Subject to the conditions and limitations in or parts which you claim failed should be this Limited Warranty, Viega LLC (VIEGA) kept and Viega contacted by writing to the warrants to wholesalers and licensed address below or telephoning 1-800-976- plumbing and mechanical contractors 9819 within thirty (30) days after the leak in the United States and Canada that its or other failure and identifying yourself as ProPress fittings, when properly installed in having a warranty claim. You should be non-industrial and non-marine applications prepared to ship, at your expense, the and under normal conditions of use, will be product which you claim failed due to a free of failure from manufacturing defect manufacturing defect and document the for a period of fifty (50) years from date of date of installation. Within a reasonable installation and that its ProPress valves, time after receiving the product, Viega will when properly installed in non-industrial and investigate the reasons for the failure, which non-marine applications and under normal includes the right to inspect the product at conditions of use, will be free of failure from Viega. Viega will notify you in writing of the manufacturing defect for a period of two (2) results of its review. years from date of installation. In the event that Viega determines that the Under this Limited Warranty, you only have failure or leak as the result of a manufacturing a right to a remedy if the failure or leak defect in the part covered by this warranty resulted from a manufacturing defect in the and that this warranty applies, the products covered by this warranty and the EXCLUSIVE AND ONLY REMEDY under failure or leak occurred during the warranty this warranty shall be the reimbursement period. You do not have a remedy under for repair and/or replacement of the part. this warranty and the warranty does not VIEGA SHALL NOT BE LIABLE FOR ANY apply if the failure or any resulting damage CONSEQUENTIAL OR OTHER DAMAGE is caused by (1) components other than (FOR EXAMPLE, WATER OR PROPERTY OR those manufactured or sold by Viega; MOLD REMEDIATION) UNDER ANY LEGAL (2) not designing, installing, inspecting, THEORY AND WHETHER ASSERTED BY or testing the ProPress fittings or valves DIRECT ACTION, FOR CONTRIBUTION OR in accordance with Viega's installation INDEMNITY OR OTHERWISE. instructions in effect at the time of the installation; applicable code requirements; THE ABOVE WARRANTY IS IN LIEU OF and accepted industry practice; (3) improper ALL OTHER WARRANTIES, EXPRESS OR handling and protection of the product prior IMPLIED, INCLUDING BUT NOT LIMITED to and during installation, inadequate freeze TO THE IMPLIED WARRANTIES OF protection, exposure to water pressures MERCHANTABILITY AND FITNESS FOR or temperatures or in applications outside A PARTICULAR PURPOSE. If a limited acceptable operating conditions; (4) acts warranty shall be found to apply, such of nature such as, but not limited to, warranty is limited to four years. Other earthquakes, fire, flood, or lightning, or (5) than this Limited Warranty, Viega does not external environmental causes, such as authorize any person or firm to create for it water quality variations, aggressive water, any other obligation or liability in connection or other external chemical or physical with its products. conditions. This Limited Warranty gives you specific In the event of a leak or other failure of legal rights and you also may have other the parts covered by this warranty, it is rights which may vary from state to state. the responsibility of the property owner This warranty shall be interpreted and to obtain and pay for repairs. Only if the applied under the law of the state in which warranty applies will Viega be responsible the product is installed and is intended as a for the remedy under this warranty. The part Commercial Warranty. PG-PP 724604 1219 ProPress Systems 47 Viega LLC 585 Interlocken Blvd Broomfield, CO 80021 Ph: 800-976-9819 Fax: 800-976-9817 www.viega.us PG-PP 724604 1219 ProPress SystemsGPL Ghostscript 9.50 Adobe InDesign 15.0 (Windows)