PAXCESS Robotic Pool Cleaner User Manual

Introduction

Thank you for choosing the PAXCESS automatic pool cleaner. Please read this manual carefully before use to ensure correct operation. This robotic pool cleaner HJ1103J is a new type of rechargeable automatic cleaning equipment for pools with the function of automatic beaching.

Product Part

The robotic pool cleaner consists of the following parts:

• Charging Port
• Swing Plate
• Top Cover
• Filter Tray
• Chassis
• Brush
• Floating Handle

Diagram showing the components of the robotic pool cleaner, including the charging port, swing plate, top cover, filter tray, chassis, brush, and floating handle.

Specifications

Operation Instruction

1. Precautions

• a. Put into or lift out from the pool with the cleaner bottom toward the wall to avoid any possible scratch to the pool. Diagram showing the correct way to place and remove the cleaner from the pool to prevent scratching.
• b. Install the brush before use to avoid possible dirt leaks. Diagram illustrating the installation of the brush.

2. Quick operation

• a. Install the floating handle: Adjust the tow rope according to the swimming pool depth. Tie the floating handle to the cleaner in the place indicated in the figure. Diagram showing how to attach the floating handle and adjust the tow rope.
• b. Install the swing plate: Insert the swing plate in the place indicated in the figure. Diagram showing how to install the swing plate.
• c. Connect the cleaner and home power with the adapter and charging line to charge the battery. Clean the charging port before charging. The red charging indicator light indicates the battery is charging. The green charging indicator light indicates charging is finished. Turn the switch knob to OFF before charging. Table showing adapter indicator status: Red for Charging, Green for Charging finished.
• d. Turn the switch knob to ON after putting it into water. The cleaner is power-on and the indicator light is steady blue. The cleaner begins to work about 15 seconds later while the blue light flashes. Diagram showing the ON and OFF switch positions.
• e. The blue light flashes three times after completing the working cycle, and then the cleaner stops to run about 2 minutes later while the indicator light is steady blue. Table showing cleaner indicator status: Working (Indicator blue flashes), Work finished (Indicator blue steady), Fault (Indicator blue flashes quickly).
• f. Power-off operation: Turn the switch knob to OFF, and the blue light turns off, while the cleaner is power-off. Please timely clean the filter tray after use.

3. Functions and adjustment of nozzles

There are two nozzles on the cleaner. One opens while the other closes. Water flows out through the open nozzle to thrust the cleaner forward. Adjust the nozzle by turning it to control the moving route.

• a. Settings of nozzle angle and moving route: The nozzles of the cleaner are marked with angles (0°-40°). The cleaner moves in an approximately straight line when the nozzle angle is 0°. The cleaner moves in a more curved line at a larger angle from 0°-40°. Diagram illustrating nozzle angles and resulting moving routes.
• b. Recommended three cycles and nozzle settings:
  Setting One: default setting: 0°--20°, for most of the pools. Diagram showing nozzle angle and moving route for Setting One.
  Setting Two: 0°--40°, when the cleaner does not have full coverage of the pool. Diagram showing nozzle angle and moving route for Setting Two.
  Setting Three: 20°--20°, for round pools. Diagram showing nozzle angle and moving route for Setting Three.

Note: Recommended settings and different settings might apply to specific pools. The operator can set according to the principle of nozzle settings and the actual situation of the pool.

4. Clean the filter tray

• a. Open the cleaner by clips. Diagram showing how to open the cleaner using clips.
• b. Take off the filter tray. Diagram showing how to remove the filter tray.
• c. Clean the filter tray and chassis. Diagram showing how to clean the filter tray and chassis.
• d. Reassemble the cleaner. Diagram showing the reassembly process of the cleaner.
• e. Push the clips on.

5. Installation and removal of swing plate

The swing plate can be removed by poking the base buckle upwards and installed by inserting it into the base. Diagram illustrating the installation and removal of the swing plate.

6. Protective cap for charging port

• Take the protective cap off to charge. Diagram 1: Taking the protective cap off for charging.
• Connect the charger to the device. Diagram 2: Connecting the charger to the device.
• Attach the protective cap to the charging plug. Diagram 2: Attaching the protective cap to the charging plug.

Note: Keep the charging port dry after use.

Troubleshooting

Packing list

Warranty

The warranty is covered for 12 months (only for battery and motor) from the date of its original purchase.

Email: service@paxcess.com

Free Call: (US) (877)-756-8666 Service Time: Mon.-Fri.: 9:00-17:00 PST

Facebook: @paxcess

Exclusions from Paxcess warranty cover:

1. Device purchased as second hand, used, or from unauthorized sellers.
2. Damage resulted from misused and abusive action.
3. Damage resulted from chemical, fire, radioactive substance, poison, or liquid.
4. Damage resulted from natural disaster.
5. Damage caused to any third party, person, object, and beyond.

Statement

PAXCESS can only provide after-sale services for products that are sold by PAXCESS. If you have purchased your unit from a different place, please contact the seller for return and warranty issues.

Logos indicating certifications: ETL, SAA, RoHS, CE.

Important Precautions

1. Strictly prohibit using the cleaner beyond its operating conditions. Please read the manual carefully and use it according to the manual. PAXCESS has no responsibility for any loss or injury caused by improper use.
2. Use only the accessories recommended or sold by the manufacturer.
3. This model mainly applies to swimming pools with a flat floor.
4. The cleaner should not be used by children under the age of 8 or people with mental disorders. Please ensure supervision by a guardian if necessary. Do not allow children to ride on it or play as a toy.
5. Use the original and authorized adapter only.
6. The power line must be replaced by after-sale professionals if it is damaged.
7. Do not power on the cleaner when it is outside of the water.
8. The power line must be connected to a leakage protective and earthed socket when charging.
9. Do not operate the cleaner when there are people in the pool.
10. Always clean and wash the filter tray after use.
11. Power off the cleaner when maintaining, cleaning, or not using it.
12. The cleaner should be stored in a cool and ventilated place, away from direct sunshine.
13. Charge the battery under the permitted condition. The cleaner should be stored in a cool place when charging. Do not place or cover it with anything to prevent damage to internal electrical components caused by overheating of the power unit.
14. Only professionals can disassemble the sealing drive assembly of the cleaner.
15. Close the pool filtration system before use.
16. Slight water pollution might occur in case of grease in motor oil seal leaks.
17. The cleaner is only suitable for small pools limited by battery capacity; otherwise, it will affect the cleaning effect.
18. Charge the battery before it completely discharges. Always stop robot operation and charge the battery when you notice less power. Never recharge a fully charged battery, as overcharging shortens the battery service life. Charge the battery at room temperature (10 °C - 40 °C / 50 °F - 104 °F). Let a hot battery cool down before charging it. Charge the battery if you do not use it for a long period (more than six months).
19. Prohibit charging the battery under conditions of fire or extreme heat. Do not use or store the cleaner near a heat source.
20. Prohibit piercing the cleaner shell with nails or other sharp objects, and prohibit hammering, impacting, and throwing the cleaner.