ET-0827 Squid Game Remote Control Young-Hee Doll
Size: 420 x 110 mm
雙面印刷 (Double-sided printing)
Ages 14+ Description of the Remote Control YOUNG-HEE Doll. Image: A line drawing of the Remote Control YOUNG-HEE Doll, a figure resembling a young girl in a dress, with pigtails and a neutral expression. Image: A line drawing of the oval-shaped Remote Control, featuring two buttons. Image: A small line drawing of a booklet labeled 'Instruction Manual'. Frequency: 2.4 GHz FCC ID: 2ADM5-ET-0827 Remote Control YOUNG-HEE Doll Power Supply: 3 x AA 1.5V Batteries (Not Included) Remote Control Power Supply: 2 x AA 1.5V Batteries (Not Included) Standard Control: Note: To avoid losing control, always pay attention when controlling the Remote Control YOUNG-HEE Doll. Image: Diagram showing the doll standing with its right arm lifted to a 90-degree angle. A curved arrow indicates the arm's upward motion. Below the doll is a drawing of the remote control. Image: Diagram showing the doll standing with its head turned 180 degrees to the side. A curved arrow indicates the head's rotation. Below the doll is a drawing of the remote control. To turn on or turn off the Remote Control YOUNG-HEE Doll, pull out the battery box cover to access the On/Off switch. Image: Diagram 1: A hand is shown reaching behind the doll's back, near the skirt, indicating where to open the battery compartment. Image: Diagram 2: The battery compartment cover on the doll's back is shown being pulled open. Image: Diagram 3: The opened battery compartment reveals space for three AA batteries and an on/off switch. Press the switch briefly to power on, and hold it for 2 seconds to power off and reset the arms and head back to their original position. Image: A series of diagrams illustrating battery installation for the doll. This includes opening the compartment, inserting three AA 1.5V batteries according to polarity, and closing the cover. To install batteries into the Remote Control YOUNG-HEE Doll, pull out the battery box cover to access the battery compartment. Insert 3(Three) X AA 1.5V Alkaline Batteries (Not Included) into the battery box. Ensure that the batteries are inserted as shown in the diagram. Finally, replace the battery box cover. When inserting the batteries, you must insert according to the correct polarity; the Remote Control YOUNG-HEE Doll won't function if batteries are reversed. Image: A series of diagrams illustrating battery installation for the remote controller. This includes unscrewing the cover, inserting two AA 1.5V batteries according to polarity, and reattaching the cover. To install batteries into the Remote Controller, unscrew the screw on the battery box cover to open the cover. Insert 2(Two) X AA 1.5V Alkaline Batteries (Not Included) into the battery box. Batteries should be placed as shown on the diagram. Replace the battery box cover and tighten the screw. When inserting the batteries, you must insert according to the correct polarity; the Remote Controller won't function if batteries are reversed. Always use a dry and soft cloth to clean this product. Avoid exposing this product to sunlight or heat. Avoid immersing this toy in water, otherwise, the electronic parts may be damaged. Check the product regularly. If any damages are discovered, please stop using immediately until it is completely repaired in good working condition. WARNING: TO AVOID BATTERY LEAKAGE This product is suitable to be used by people who have operating experience in remote toys or are aged no less than 14 years old. Please do not put the product in your mouth to prevent choking hazard of small parts. Please do not put fingers into available interspaces. Please do not play the product in a brutal way such as throwing, crashing, or twisting it. Please store the smaller-sized product accessories in places that are out of reach of children, in order to avoid the occurrence of accidents. Avoid placing batteries in places of high temperatures and avoid exposure to heat. When young children are operating the product, it shall be ensured that adults are guiding and making sure the product control is within the viewing range of the controller (or instructor) so that it makes the control of the toy more convenient. When the product is not in use, please switch off the power supplies of the toy and remove the batteries from the product. Please note that the manufacturer won't take any responsibility for any wrong operation as this may result in severe injury or loss of property, and they cannot control the operating process during the time the user assembles or uses this product. Once this product is sold, the manufacturer won't be responsible for any safety responsibility during the time the user operates or uses controls this product. This device complies with Part 15 of the FCC Rules. Operation is subject to the following two conditions: (1) this device may not cause harmful interference, and (2) this device must accept any interference received, including interference that may cause undesired operation. Caution: Changes or modifications not expressly approved by the party responsible for compliance could void the user's authority to operate the equipment. NOTE: This equipment has been tested and found to comply with the limits for a Class B digital device, pursuant to Part 15 of the FCC Rules. These limits are designed to provide reasonable protection against harmful interference in a residential installation. This equipment generates, uses, and can radiate radio frequency energy and, if not installed and used in accordance with instructions, may cause harmful interference to radio or television reception, which can be determined by turning the equipment off and on. The user is encouraged to try to correct the interference by one or more of the following measures: RF warning statement: The device has been evaluated to meet general RF exposure requirement. The device can be used in portable exposure condition without restriction. FCC ID: 2ADM5-ET-0827 Class 1 LED product 1616 Holdings, Inc. Made In Shantou, China SQUID GAME ™/ Netflix. Used with permission. Keep All Relevant Information for Future Reference Item#: ET-0827Product Overview
Package Contents
Specifications
Remote Controller Functions
GREEN LIGHT BUTTON
RED LIGHT BUTTON
Power On/Off
Batteries Installation For Remote Control YOUNG-HEE Doll
Notice:
Batteries Installation For Remote Controller
Notice:
Performance Tips
Care and Maintenance
IMPORTANT: BATTERY INFORMATION
For AA Batteries
Warning
FCC Statement
Distributed by:
701 Market Street, Suite 200
Philadelphia, PA 19106