User Manual for SinoTrack models including: Sino, GPS Tracker, ST-901

ST-901 User Manual

GPS Tracker ST-901

ST-901 User Manual Author: Created Date: 2/11/2021 8:58:02 PM ...

Bekijk de handleiding

Sinotrack Auto/Scooter GPS Tracker- Auto beveiliging - web en app gratis | bol.com

Not Your Device? Search For Manuals / Datasheets:

File Info : application/pdf, 10 Pages, 391.41KB

Document
original
GPS Tracker ST-901
User Manual
1/10

LED Status
1.1. Blue LED--- GPS Status
Status Flashing
ON
1.2. Orange LED---GSM Status Status Flashing ON

Meaning No GPS Signal or GPS starting
GPS OK
Meaning No SIM card or GSM starting
GSM OK

The default password is: 0000 The default mode is normal working (ACC Mode). GPS Status: A is get location, V is invalid location. Alarm mode is on. Alarm will send to the 3 control number. Battery 5 is 100%, 1 is 20%; the battery is from 1 to 5.

2/10

Installation: 1. The GPS antenna side should towards to clear sky.
(Can't put under Metal, but Glass and Plastic is ok)
2. Connect the wires:
3/10

Functions:
1. Set control number Command: Number+pass+blank+serial Sample: 139504434650000 1 13950443465 is mobile number, 0000 is password, 1 is serial means the first number. When the tracker reply "SET OK" means the setting is ok. You can set the second and third control number also.
2. Working mode: ST-901 has both SMS and GPRS working mode. 1. If you want to control it by mobile and use SMS only, you can get Google location from you mobile, then you can choose SMS mode. 2. If you want to monitor the tracker online real time, and you want to install the tracker data for years, you should choose the GPRS mode. You can send SMS to choose the mode. SMS Mode: (Default)
Command: 700+Password Sample: 7000000
Reply: SET OK When ST-901 receives the command, it will change to SMS mode. GPRS Mode:
Command: 710+Password Sample: 7100000
Reply: SET OK When ST-901 receives the command, it will change to GPRS mode.
3. Change Password
Command: 777+New Password+Old password Sample: 77712340000
The 1234 is new password, and 0000 is old password. When ST-901 received the command, it will reply SET OK
4. Get location with Google link
Command: 669+password Sample: 6690000
When ST-901 receives the command, it will read the GPS data, and send back the location with Google link; you can open the link to check the tracker location on maps.
4/10

5. Get location by phone call.
You can use any mobile to call the SIM Card in tracker, it will reply the location with Google link;you can open the link to check the tracker location on maps.
When you call the tracker when it is in invalid location, it will reply the last valid location to you, after it get new location again, it will send the seconds SMS to you with new location.
6. Change Time Zone Command: 896+password+Blank+E/W+HH Sample: 8960000E00 (default) E means East, W means west, 00 mean time zone. Reply: SET OK 0 time zone is 8960000 00 7. Send location in defined time every day. It will send to the first control number. Command: 665+password+HHMM HH mean hour, it from 00 to 23, MM means minutes, it from 00 to 59. Sample: 66500001219 Reply: SET OK Close the function command: 665+password+OFF (default) Sample: 6650000OFF Reply: SET OK
5/10

8. Geo Fence (send alarm to the first number only) Open Geo Fence: 211+password Sample: 2110000 Reply: SET OK Close Geo Fence: 210+password Sample: 2100000 Reply: SET OK Set the Geo Fence Sample: 0050000 1000 (the Geo Fence is 1000 meters) Reply SET OK We suggest the Geo Fence more than 1000 meters.
9. Over speed Alarm (send Alarm to control numbers) Command: 122Blank+XXX Sample: 1220000 120 Reply: SET OK The XXX is the speed, from 0 to 999, the unit is KM/H. If the XXX is 0, it means close the over speed alarm.
10. Mileage Set the initial Mileage Command: 142+Password<+M+X> X is the initial Mileage, the unit is meter. Sample: 1420000 Reply: MILEAGE RESET OK Sample: 1420000M1000 Reply: SET OK, CURRENT: 1000 Red the current Mileage Command: 143+password Sample: 1430000 Reply: CURRENT TOTAL MILEAGE:XX. XX is the mileage, the unit is meter.
6/10

11. Shock Alarm (send SMS alarm to the first number) Open Shock Alarm: 181+password+T Sample: 1810000T10 Reply: SET OK The T meaning shocking time, the unit is second, It from 0 to 120 senconds. Close Shock Alarm: 180+password Sample: 1800000 Reply: SET OK
12. Low battery alarm (send SMS to first number) When the battery is low, the tracker will send the Low Power Alarm SMS to the first number
When the battery is Full, Bat:5, means 100%; Bat:4 means 80%, Bat:3 means 60%, Bat:2 means 40%, Bat:1 means 20%. When the Bat is 1, it will send low battery alarm.
13. Call mode Call mode on: Command: 150+password Sample: 1500000 Reply: SET OK
Call mode off Command: 151+password Sample: 1510000 Reply: SET OK When the call mode on, the alarms will call and send SMS to control number, When the call mode off, only send SMS.
14. Set APN Command 1: 803+password+Blank+APN Sample: 8030000 CMNET Reply: SET OK
7/10

If your APN need user and pass: Command 2: 803+password+Blank+ APN+Blank+ APN user+Blank+ APN pass Sample: 8030000 CMNET CMNET CMNET Reply: SET OK 15. Set the IP and Port Command: 804+password+Blank+IP+Blank+Port Sample: 8040000 103.243.182.54 8090 Reply: SET OK 16. Set the time interval ACC on time interval (default is 20 seconds) Command: 805+password+Blank+T Sample: 8050000 20 Reply: SET OK T means the time interval, the unit is second, It from 0 to 18000 seconds, When T=0 means close GPRS. ACC off time interval (default is 300 seconds) Command: 809+password+Blank+T Sample: 8090000 300 Reply: SET OK T means the time interval, the unit is second, It from 0 to 18000 seconds, When T=0 means close GPRS. The minimum time interval is 5 seconds.
8/10

Online Track:
Please login from www.sinotrack.com or http://103.243.182.54
You can also down load our APPS on website to track on your mobile:
9/10

Other Functions:
1. RESTART The tracker will restart.
2. RCONF Read the configure of tracker
Tracker will reply: AU08,ID: 8160528336,UP:0000,U1:,U2:,U3:,MODE:GPRS DAILY:OFF,GEO FENCE: OFF,OVER SPEED:OFF VOICE:ON,SHAKE ALARM:OFF,SLEEP:OFF,APN:CMNET,,,IP:103.243.182.54:8090,GPRSUPLOAD TIME:20 TIME ZONE:E00
AU08: software version ID: 8160528336 (Tracker ID) UP:0000 (password, default is 0000) U1:the first control number, U2:the second control number, U3:the third control number. MODE:GPRS (working mode, default is GPRS) DAILY:OFF (Daily time to report, default off) GEO FENCE: OFF (Geo Fence, default off) OVER SPEED:OFF (over speed, default off) VOICE:ON (Call mode, default on) SHAKE ALARM:OFF (Shock Alarm, default off) SLEEP MODE : OFF (sleep mode, default off) APN:CMNET,,, (APN, default is CMNET) IP:103.243.182.54:8090 (The IP and Port) GPRS UPLOAD TIME:20 (time interval) TIME ZONE:E00 (Time zone, default is +0)
10/10



References

GPL Ghostscript 9.26