Redragon NIXPRO 3-Mode RGB Gaming Mouse

Warranty Information

Thank you for choosing Redragon. Please note our warranty rules for better customer service:

1. Repair is guaranteed for failure due to electrical circuit problems within the warranty period. Other damages, such as disassembly, hard impacts, submersion into water, plugging into improper current or voltage, and damage caused by natural disasters are not included.
2. Consumable parts (such as foot pad) and spare parts replacement are not included in our warranty.

Product Overview

The Redragon NIXPRO is a 3-mode connection RGB gaming mouse.

Connectivity Modes: Wired, 2.4G Wireless, Bluetooth

Features: RGB Lighting, DPI Adjustment

Button Instructions

• 1. Left button
• 2. Right button
• 3. Scroll wheel (Click as middle button)
• 4. Fire button (Triple tap)
• 5. Side button, defaulted forward
• 6. Side button, defaulted backward
• 7. DPI +
• 8. DPI-
• 9. Lighting effect switch
• 10. BT pairing button
• 11. 2.4G/OFF/BT switch
• 12. USB receiver storage slot

Connection Modes

Wired Connection

Connect the mouse to the computer with a USB cable. The mouse will automatically turn to wired connection mode, and the computer will recognize and configure it. The mouse will also charge its battery simultaneously.

2.4G Wireless Connection

Plug the USB receiver into the computer's USB port. Switch the [2.4G/OFF/BT] to "2.4G". Click any button, and the computer will recognize and configure the mouse automatically.

BT Connection

Switch the [2.4G/OFF/BT] to "BT". Press and hold the [BT Pairing button] for 3 seconds; the LED indicator will flash blue. Turn on the computer's Bluetooth and search for available devices. Select the device name "BT 5.1 Mouse". The computer will recognize and configure the mouse automatically.

If auto-connection is unsuccessful or you want to connect a new device, press and hold the [BT Pairing button] for 3 seconds to enter pairing status. Repeat the above operation to connect with a new device.

Warning: Charging current: 5V-2A max.

DPI Adjustment and Indication

The scroll wheel LED indicator shows the current DPI level:

• RED - 800 DPI
• BLUE - 1600 DPI
• GREEN - 2400 DPI
• PURPLE - 3200 DPI
• YELLOW - 12000 DPI

Report Rates Adjustment

The mouse supports adjustable report rates: 125Hz, 250Hz, 500Hz, and 1000Hz. Use the mouse software to set the report rates.

For more adjustable functions, backlight settings, and macro recording, please download and install the mouse software.

Power Saving Mode & Charging

When the mouse is not in use for over 3 minutes (in wireless connection), it will enter power save mode. Move or click any button to wake it up.

When the battery is low, the scroll wheel LED indicator will flash red. Connect the mouse to the computer using the USB cable to charge the battery. The LED indicator will be steady red during charging. After fully charged, the LED will show the current DPI level color.

Built-in Li-thion battery: 1 unit.

FAQ

1. Mouse not responding: Check if the mouse is plugged correctly into the computer's USB port, or try another USB port.
2. Mouse moving slowly, jumping, or with delay: Try a different surface. Dark, dirty, un-flat, or bright surfaces may affect mouse performance. A mouse pad is strongly recommended.

FCC Statement

Changes or modifications not expressly approved by the party responsible for compliance could void the user's authority to operate the equipment.

This equipment has been tested and found to comply with the limits for a Class B digital device, pursuant to Part 15 of the FCC Rules. These limits are designed to provide reasonable protection against harmful interference in a residential installation. This equipment generates, uses, and can radiate radio frequency energy and, if not installed and used in accordance with the instructions, may cause harmful interference to radio communications. However, there is no guarantee that interference will not occur in a particular installation. If this equipment does cause harmful interference to radio or television reception, which can be determined by turning the equipment off and on, the user is encouraged to try to correct the interference by one or more of the following measures:

• Reorient or relocate the receiving antenna.
• Increase the separation between the equipment and receiver.
• Connect the equipment into an outlet on a circuit different from that to which the receiver is connected.
• Consult the dealer or an experienced radio/TV technician for help.

This device complies with part 15 of the FCC rules. Operation is subject to the following two conditions: (1) this device may not cause harmful interference, and (2) this device must accept any interference received, including interference that may cause undesired operation.

This device complies with Part 15 of the FCC Rules and contains licence-exempt transmitter(s)/receiver(s) that comply with Innovation, Science and Economic Development Canada's licence-exempt RSS(s). Operation is subject to the following two conditions: (1) this device may not cause harmful interference, and (2) this device must accept any interference received, including interference that may cause undesired operation.

Battery Safety Guidelines

• DO NOT replace the battery with a different model.
• DO NOT use this product if the battery shows signs of damage including, but not limited to tearing, deformation, leakage, or the smell of electrolytic material.
• DO NOT touch the battery if material is leaking and seek immediate medical attention if any material comes into contact with your skin or eyes.
• DO NOT expose the battery to liquid, heat sources, electricity (outside of the product itself), or other non-standard operating conditions.
• DO NOT remove the battery except for proper disposal and recycling as required by local laws and regulations.
• DO NOT impact, bend, alter, disassemble, or otherwise damage the battery as the contents are volatile, hazardous, and can be harmful.

CAUTION: Failing to follow all safety guidelines may result in product damage, explosion, fire, and/or electric shock.

Canadian Compliance

This device contains licence-exempt transmitter(s)/receiver(s) that comply with Innovation, Science and Economic Development Canada's licence-exempt RSS(s). Operation is subject to the following two conditions: (1) This device may not cause interference. (2) This device must accept any interference, including interference that may cause undesired operation of the device.

Cet appareil contient des émetteurs / récepteurs exemptés de licence conformes aux RSS (RSS) d'Innovation, Sciences et Développement économique Canada. Le fonctionnement est soumis aux deux conditions suivantes: (1) Cet appareil ne doit pas causer d'interférences. (2) Cet appareil doit accepter toutes les interférences, y compris celles susceptibles de provoquer un fonctionnement indésirable de l'appareil.

Product Information (Chinese)