ANCEL V6 User's Manual

1 Statement

Users must carefully read the instruction manual, especially the safety instructions, before connecting, commissioning, and operating products from OBDSPACE TECHNOLOGY CO., LTD. (hereinafter referred to as "OBDSPACE").

1.1 Agreement

Product usage signifies endorsement of the following:

• Refer to the packing list for the actual product configuration.
• Functions and pictures described are subject to the actual software. Information, specifications, and illustrations are current at the time of publication. The company reserves the right to make changes without notice.

1.2 Copyright information

No part of this manual may be copied or stored in any form (electronic, mechanical, photocopying, recording, or otherwise) without prior written permission from OBDSPACE. Software and data are protected by copyright laws and international contract law.

1.3 Disclaimer

• This manual provides operation methods for Ancel V6 only. OBDSPACE is not responsible for consequences arising from using these methods with other equipment.
• OBDSPACE is not liable for accidents, costs, or expenses due to equipment damage caused by user abuse, misuse, unauthorized modifications, or operation contrary to manual requirements.

1.4 Safety Information

For personal and vehicle safety, all personnel handling the equipment must read the safety precautions in this manual.

1.4.1 Inspection Precautions

• Connect the Ancel V6 only to a grounded safety outlet. Verify the diagnostic circuit is in good condition before connecting to prevent damage. Use a multimeter to check diagnostic seat voltage if necessary.
• Use only the provided power cord or a detected power line.
• Be aware of environmental factors like acid, alkali, poison gas, and heavy pressure.
• Avoid exhaust gases, which contain toxic compounds. Operate the vehicle in a well-ventilated area.
• Do not place the device on the vehicle's power distribution unit, as strong electromagnetic interference can cause damage.
• Ensure the parking brake is engaged and the gear lever is in neutral or park before starting the engine after installation.
• When the engine is hot, avoid contact with high-temperature components like the water tank and exhaust pipe. Be cautious of voltages from ignition coil, distributor cover, ignition circuit, and spark plug during engine operation.

1.4.2 Notes on the use of the instrument

• The instrument is a precision electronic device; handle it gently, away from heat and electromagnetic fields.
• Ensure the instrument and diagnostics are securely connected to prevent test interruptions.
• When moving the device, use screws to secure cables and connectors to prevent disconnection and damage. Hold connectors by the front end when unplugging.
• Do not disconnect electrical components while energized to prevent self-inductance, mutual inductance, and damage to sensors and the vehicle ECU.
• Operation requires a basic understanding of vehicle inspection, maintenance, and the vehicle's electronic control system.

1.4.3 Operating car ECU considerations

When performing diagnostic operations on vehicles with computer control systems:

• Keep magnetic objects (e.g., speakers) away from the computer, as they can damage ECU circuits and components.
• Do not disconnect internal electrical equipment when the ignition is on, as this can cause high instantaneous voltage, damaging sensors and the ECU.
• Exercise caution when working near computers or sensors to prevent damage.
• When performing maintenance near an ECU-controlled digital meter, wear an anti-static wrist strap.
• Turn off the ECU system power before welding on a car.
• Do not use test lights for ECU-related electrical devices unless specified; use appropriate methods to prevent ECU or sensor damage.
• Test ECUs and sensors with a high-impedance digital meter, not a pointer-type ohmmeter, unless otherwise specified.

2 Product description

2.1 Product Overview

The Ancel V6 is a professional, efficient, and convenient diagnostic tool for passenger cars. Key features include:

• Powerful quad-core Cortex-A53 2.0GHz processor with faster 2GB LPDDR4 and 32GB On-board memory.
• Android 10.0 OS on an 8.0-inch IPS Multi-touch capacitive touch screen.
• Unique ergonomic design with rubberized outer protection and a rugged internal housing.
• Built-in rechargeable lithium-polymer battery providing up to 10 hours of continuous operation.
• OE-Level full-systems coverage for over 80 vehicle makes.
• Supports 15 commonly used service Reset Functions, with more to be added.
• Remote Technical Support via TeamViewer.

2.2 The front view of Ancel V6 tablet

The front of the Ancel V6 tablet features a touchscreen display and indicator lights.

2.3 The top view of Ancel V6 tablet

The top panel of the Ancel V6 tablet includes various ports and buttons:

2.4 The back view of Ancel V6 tablet

The back panel features a camera.

2.5 The product specifications

3 Product software introduction

The software homepage displays the following functional modules: Diagnosis, Hot Function, Quick Support, DTC Query, Update, Data Manager, Feedback, Settings.

3.1 Diagnosis

Provides extensive vehicle coverage for over 80 makes from Europe, America, Asia, China, and Australia. The interface allows selection by region (Europe, America, Asia, China, Australia) and then by specific vehicle make (e.g., ABARTH, ALFA ROMEO, ASTON MARTIN, AUDI, BENTLEY, BUGATTI, BENZ, BMW, CITROEN, DACIA, FERRARI, FIAT, GM, BUICK, CADILLAC, CHEVROLET, GMC, RAVON, CHRYSLER, FORD, JEEP, SCION, DODGE, HYUNDAI, ACURA, DAEWOO, DAIHATSU, FUSO, HONDA, INFINITI, ISUZU, KIA, LEXUS, LUXGEN, MAZDA, BYD, CHANGAN, CHANGHE, CHERY, EMGRAND, ENGLON, FOTON, GEELY, GLEAGLE, GWM, HBSH, HUACHEN, FORD(AUSTRALIA), HOLDEN). It also includes an OBD II section for light-duty vehicles.

3.2 Hot function

Supports 15 commonly used service Reset Functions:

• OILREST
• ABS BLEEDING
• BATTERY
• DPF
• EPB
• INJECTOR
• SAS
• THROTTLE
• TPMS
• IMMO KEYS
• AT SET
• GEAR
• HEADLIGHT
• SUSPENSION
• SUNPROOF

3.3 Update

Allows users to download vehicle data and service function data. Users can select all available updates and perform a one-click upgrade.

3.4 Data Manager

This section manages screenshot pictures, recorded videos, vehicle software, testing reports, data playback, and the function list. It shows storage card capacity (25.80GB) and available space (19.45GB).

3.5 Quick Support

Provides remote technical support via TeamViewer QuickSupport. Users can connect by visiting https://start.teamviewer.com and entering their ID.

3.6 DTC Query

Allows quick retrieval of fault information corresponding to diagnostic trouble codes (DTCs) to help locate component faults. The interface displays a table with columns for Fault Code, Vehicle Model, and Fault Description (e.g., P0001 - Fuel Volume Regulator Control Circuit/Open).

3.7 Feedback

This function enables users to upload vehicle diagnostics problems encountered during software use, helping engineers to quickly repair software errors. It includes fields for Vehicle Name, Question Type, Complaint Content, and Attachments.

3.8 Settings

Allows users to view or set various options:

• Run Mode: Select between Diagnosis and Demo.
• Unit: Choose between Metric System and Imperial System.
• Search Engine: Select between Google and Baidu.
• System Info: Displays System Name (Ancel), System Version (9.4), Firmware Version (7014, with VCI update option), Serial Number (T720090196), Equipment Capacity (25.80GB), and Residual Capacity (19.46GB).
• Version Update: Shows the current version (Ancel V9.4) and indicates if it is the latest version, with an option to check for updates.
• Languages: Supports multiple languages including English (EN), French (Le français), Spanish (Espanol), German (Deutsch), Russian (русский), and Korean (한국어).

4 Product activation

The product requires activation:

1. Click the 'Update' function on the home page.
2. On the first login, if the product is not activated, a prompt will appear asking to register and activate. Select 'YES'.
3. Fill in the activation information (First Name, Last Name, Email, Company, County/Region) and click 'ACTIVATION'.
4. Upon successful submission, a confirmation message indicates an activation link has been sent to the provided email address.
5. Log in to the email inbox and click the activation link within 30 minutes to complete the activation.

5 Cleaning and maintenance and warranty

5.1 Cleaning and maintenance

• Do not disassemble the device; handle it gently to avoid impact.
• Store the device in a flat, dry, temperature-friendly, and dust-free environment, avoiding high temperatures, humidity, smoke, vibration, direct sunlight, and strong magnetic fields.
• If the device is not used for extended periods, run it regularly to prevent moisture buildup.
• Unplug the power when not in use to prevent aging of electrical components.
• Disconnect power before cleaning a dirty unit.
• Use only a soft cloth and a neutral detergent for cleaning; avoid corrosive cleaning agents or rough cloths.
• Clean the screen with a special LCD screen wiper.
• Do not place objects on the screen to prevent cracking or damage to internal components.

5.2 Warranty

This warranty applies only to products purchased from an OBDSPACE authorized dealer. Buyers purchasing from unauthorized sources are solely responsible for maintenance costs and are not eligible for warranty services from OBDSPACE.

(1) Product acceptance

Upon receiving the product, open the package and carefully check the product category and quantity against the attached list. Report any shortages, errors, damages, or abnormal conditions immediately, keeping all product documents. Failure to do so will be considered a waiver of the claim.

(2) Product warranty

Starting from the date of purchase (with valid proof and warranty card), if the product experiences performance failure within one month not caused by recommended operation deviations or uncontrollable environmental events, users can opt for evaluation via maintenance service or replacement with the same model. A one-year warranty covers the main unit, connectors, and power adapter thereafter.

(3) Product Software Update

Users receive two years of free software updates after product activation. Updates will be charged annually after this period.

(4) Not in the scope of the free warranty

The free warranty does not cover:

• Failures or defects not related to product quality, including misuse, unauthorized disassembly, use of improper accessories, damage from transport/storage, etc.
• Natural wear and tear of the product (cover, keypad, screen, accessories).
• Discrepancies in serial numbers or warranty card numbers, or if quality inspection tags/barcodes are removed or altered.
• Maintenance or modifications performed without OBDSPACE approval.

(5) Product warranty program

For repairs, send the product to a local distributor or OBDSPACE with the purchase certificate and warranty card. Provide company name, contact name, phone number, problem description, and purchase invoice.

Note: The purchase certificate is crucial for warranty service. Obtain a formal invoice from the dealer stating the product name, model number, serial number, and purchase date, bearing the dealer's official seal.

(6) Over-warranty product maintenance regulations

For products requiring repair after the warranty period, OBDSPACE will charge a maintenance fee, and the user will bear the freight. Technical support will provide a maintenance cost estimate via fax. Repairs will proceed after customer confirmation and payment to the designated account.