2026 SCOTT Gambler Manual
This document provides detailed technical information and instructions for the 2026 SCOTT Gambler downhill bicycle.
Introduction
The GAMBLER should be adjusted exactly to the rider for maximum safety and rideability. Please contact your authorized SCOTT dealer for advice to avoid technical problems or any harm.
Legend
Geometry & Technical Data
The following table details the geometry specifications for the 2026 SCOTT Gambler across various configurations. A diagram of the bicycle frame illustrates key measurement points labeled A through M.
| MED High BB MX | MED Low BB MX | MED Low BB 29 | LARGE High BB MX | LARGE Low BB MX | LARGE Low BB 29 | XL High BB MX | XL Low BB MX | XL Low BB 29 | |
|---|---|---|---|---|---|---|---|---|---|
| A Head tube angle | 63.5° | 62.5° | 63.5° | 63.5° | 62.5° | 63.5° | 63.5° | 62.5° | 63.5° |
| B Head tube length | 110 mm | 110 mm | 110 mm | 110 mm | 110 mm | 110 mm | 110 mm | 110 mm | 110 mm |
| C Top tube horizontal | 602 mm | 602 mm | 602 mm | 628 mm | 628 mm | 628 mm | 653 mm | 653 mm | 653 mm |
| D Standover height | 684 mm | 684 mm | 684 mm | 684 mm | 684 mm | 684 mm | 684 mm | 684 mm | 684 mm |
| E BB offset | +2 | -14 | -14 | +2 | -14 | -14 | +2 | -14 | -14 |
| F BB height | 361 mm | 345 mm | 361 mm | 361 mm | 345 mm | 361 mm | 361 mm | 345 mm | 361 mm |
| G Wheelbase | 1260/1275 mm | 1263/1278 mm | 1278 mm | 1285/1300 mm | 1288/1303 mm | 1303 mm | 1310/1325 mm | 1313/1328 mm | 1328 mm |
| I BB center to TST | 405 mm | 405 mm | 405 mm | 405 mm | 405 mm | 405 mm | 405 mm | 405 mm | 405 mm |
| J Seat angle | 67.2° | 67.2° | 67.2° | 67.2° | 67.2° | 67.2° | 67.2° | 67.2° | 67.2° |
| K Chainstay | 445/460 mm | 449/464 mm | 464 mm | 445/460 mm | 449/464 mm | 464 mm | 445/460 mm | 449/464 mm | 464 mm |
| L Reach | 439/445/451 mm | 427/433/439 mm | 439/445/451 mm | 464/470/476 mm | 452/458/464 mm | 464/470/476 mm | 489/495/501 mm | 477/483/489 mm | 489/495/501 mm |
| M Stack | 639 mm | 648 mm | 639 mm | 639 mm | 648 mm | 639 mm | 639 mm | 648 mm | 639 mm |
| Fork Rake | 52 mm | 52 mm | 52 mm | 52 mm | 52 mm | 52 mm | 52 mm | 52 mm | 52 mm |
| Trail | 129 mm | 129 mm | 129 mm | 129 mm | 129 mm | 129 mm | 129 mm | 129 mm | 129 mm |
Additional Technical Data
| Specification | Value |
|---|---|
| Seatpost | 31.6 mm |
| Seatpost Clamp | 34.9 mm |
| Max Seatpost Insertion | 165 mm for all sizes |
| Travel | 200 F / 210 R |
| Shock Length | 250 mm |
| Shock Stroke | 75 mm |
| Shock Hardware/Frame | Front: M8 x 80, Rear: M8 x 20 |
| Headset | ZS56/28.6-ZS56/30 (adj.cup 0mm/+6mm/-6mm) |
| Rear Axle | 190 x 12 (pitch 1.0) |
| Rear Hub | 157 x 12 |
| BB Housing | PF MTB 107 |
| Max Chain Ring | 36 Tooth |
| Max/Min Rear Rotor | 200 Direct / 203 + Shimano Adapt. |
| Max Tyre Width | 2.6 in |
| Chain Line | 58.5 mm |
Bearings
- Lower Link/Chainstay: 2 x 61802 2RS
- Linkage/Seattube: 2 x 61802 2RS
- Linkage/Seatstay: 2 x 61802 2RS
- Seatstay/Chainstay: 2 x 61802 2RS
- Main BB Bearing: 2 x 61810 2RS
- Tie Links Top & Bottom: 4 x 3900V 2RS
- Shock Mount: 2 x 61800 2RS
Headset Adjustment
The headset cups allow for adjustment of the head tube angle. There are three settings for the headset cups:
- Long Setting: +6mm
- Neutral Setting: 0mm
- Short Setting: -6mm
Ensure the headset cups are matched correctly on the top and bottom of the head tube.
Dropout Adjustment
To adjust the chainstay length, you will need to change the right dropout and adjust the left dropout and rear brake mount. The part number for the dropout is 424382.
Chainstay Length 29" 460mm: This configuration uses specific dropouts. The process involves using a T30 Torx tool and applying 15 Nm of torque to the axle bolts. A 5mm Hex tool is used for other fasteners, and 8 Nm torque is specified for some components. Threadlock (242) and grease are indicated for certain parts.
Chainstay Length MX (mixed/27.5) 445mm: This configuration also uses specific dropouts. Similar to the 29" setup, it requires a T30 Torx tool, 15 Nm torque for the axle, 5mm Hex tool, and 8 Nm torque for other fasteners. Threadlock (242) and grease are indicated.
Bottom Bracket Height Adjustment
The bottom bracket (BB) height can be raised or lowered from High to Low in either the Less Progressive or More Progressive setting. This adjustment changes the progressivity of the rear shock from 25% to 30%.
The adjustment involves using a T30 Torx tool and applying 15 Nm of torque. The settings are visually represented by indicators for "Lo. B.B. Hi." and "LESS PROGRESSIVE" or "MORE PROGRESSIVE".
- High BB / Less Progressive
- Low BB / Less Progressive
- High BB / More Progressive
- Low BB / More Progressive
Setting Sag
To set the sag, gently sit on the bike and allow the sag meter on the rear shock to move. After completing this, dismount the bike gently and check the value indicated on the sag meter.
If the sag value is not to your liking and falls outside the indicated sag range (optimum 25%-35%), access the shock by removing the shock cover and adjusting the air pressure.
The rear shock has an "Eye 2 Eye" length of 250mm and a stroke of 75mm.
Cable Routing
For left-hand rear braking (UK configuration), use the cable guide routing on the drive side of the headtube, indicated by dashed lines in the diagram.
The diagram also shows the routing for the Gear Cable (Pink) and Brake Cable (Blue) through the frame.
General Spare Parts
The following are available spare parts for the 2026 SCOTT Gambler:
- 424380 SCO LINK LOWER OUTER GAMBLER 26 (no bearings)
- 424386 SCO LINK LOWER INNER GAMBLER 26 (Requires T30 Torx, 2 Nm torque)
- 425854 SCO LINK OUT GAMBLER 10 26
- 425853 SCO LINK OUT GAMBLER RC 26
- 424384 SCO SWINGARM REP KIT GAMBLER 26
- 424374 SCO LINK TIE GAMBLER 26
- 423997 SCO BASH GUARD GAMBLER 26 (Requires T30 Torx, 5 Nm torque)
- 297136 SCO BOTTLE CAGE INSERTS SCALE HMX-SL 23
- 422742 SCO SHOCK DT COVER GAMBLER 26 (no multi tool)
- 424376 SCO SAG INDICATOR GAMBLER 26
- 424383 SCO BRAKE MOUNT FLIP GAMBLER 26
- 424382 SCO AXLE MOUNT KIT GAMBLER 26 (Requires 2.5mm Hex, T30 Torx, 15 Nm torque)
- 286000 SCO DROPOUT SRAM UDH 21 (Requires 6mm Hex, 25 Nm torque, Reverse Thread)
- 424389 SCO SHOCK MOUNT BOLT KIT GAMBLER 26 (Requires T30 Torx, 10 Nm and 15 Nm torque)
- 424381 SCO AXLE REAR 157X12 GAMBLER 26 (Requires T30 Torx, 15 Nm torque)
- 424377 SCO CHAINGUIDE GAMBLER 26 (Requires 2.5mm Hex)
- 422741 SCO FORK BUMPERS GAMBLER 26 (protection not prevention) (Requires 2.5mm Hex)
- 422739 SCO CS/SS PROTECTOR GAMBLER 26
- 424375 SCO CABLEGUIDE SET GAMBLER 26
- 422743 SCO M/P COVER GAMBLER 26
- 422740 SCO CHAINSTAY FENDER GAMBLER 26 (Requires 2.5mm Hex, 3 Nm torque)
- 424542 SCO LOWER CHAINSTAY PROTECTOR GAMBLER 26
- 423490 SYN HEADSET CUPS ZS56 REACH ADJUST 5MM
- 423418 SYN HEADSET ZS56/28.6 - ZS56/30
Manufacturer's Guarantee
When purchasing a new SCOTT bicycle from an authorized SCOTT dealer, SCOTT grants a manufacturer's guarantee subject to the following provisions.
Conditions
The manufacturer's guarantee is only granted to the first-time buyer of a SCOTT bicycle who has purchased it from an authorized SCOTT dealer. The manufacturer's guarantee only applies if the bicycle is registered to the first buyer at www.scott-sports.com within one year of purchase.
Duration
The manufacturer's guarantee is granted from the date of purchase for a period of five years on bicycle frames and rear ends. The guarantee period is reduced to three years if the SCOTT bicycle is not serviced at least once a year by an authorized SCOTT dealer. Maintenance services must be carried out in accordance with the maintenance instructions in the SCOTT manual and must be confirmed by the stamp and signature of the authorized SCOTT dealer. For frames and rear ends of Category 5 bicycle models and for rigid forks manufactured by SCOTT, the duration of the manufacturer's guarantee is limited to two years. If a defect is remedied within the scope of a guarantee claim, the duration is not extended. The guarantee ends when the first-time buyer transfers ownership of the SCOTT bicycle to a third person.
Assertion
The manufacturer's guarantee is provided by SCOTT Sports SA, Route du Crochet 11, 1762 Givisiez, Switzerland. The buyer must inspect the SCOTT bicycle immediately after purchase and notify their authorized SCOTT dealer in writing of any obvious defects. Hidden defects must be reported immediately after their discovery. In the event of a guarantee claim, the SCOTT bicycle must be handed over to an authorized SCOTT dealer, who will contact SCOTT to remedy the defect. Assertion of a guarantee claim requires the presentation of the original proof of purchase and proof of maintenance service in the SCOTT manual.
Performance of SCOTT in the event of a guarantee claim
In the event of a guarantee claim, SCOTT will, at its own discretion, repair the defect or replace the defective product with a product of similar quality, whereby color and model deviations are possible. If repair or replacement is not possible, a purchase price refund will be made taking into account previous use. SCOTT is entitled to commission third parties to remedy the defect.
Limitations
The manufacturer's guarantee applies exclusively to frames, swingarms, and rigid forks of SCOTT bicycles. Bicycle components are excluded. The guarantee does not apply to normal wear and tear, damage caused by accidents or other excessive force, corrosion, improper maintenance, incorrect assembly, assembly of unsuitable components or accessories, or cosmetic defects (e.g., varnish). The guarantee does not apply to SCOTT bicycles used in a rental shop.
Miscellaneous
These manufacturer's guarantee provisions apply to all SCOTT bicycles as of model year 2023. Statutory warranty rights of the buyer and guarantees of component manufacturers (Shimano, SRAM, etc.) remain unaffected. The place of jurisdiction for all disputes is Freiburg, Switzerland. This manufacturer's guarantee is subject to Swiss law, excluding any legislation that refers to foreign law.
BIKE WARRANTY PERIODS
A table illustrates warranty periods for different categories, including a regular warranty period and an option for prolongation according to maintenance intervals.
Contact & Recycling Information
All rights reserved © 2026 SCOTT Sports SA
Distribution:
SSG (Europe) Distribution Center SA
P.E.D. Zone C1
Rue du Kiell 60
6790 Aubange
Belgium
SCOTT Sports SA
Route du Crochet 11
1762 Givisiez
Switzerland
Website: www.scott-sports.com/contact
Website: www.scott-sports.com
Recycling Information
This article is subject to sorting. Information available at quefairedemesdechets.fr.
FR: Cet appareil, ses accessoires, et batterie se recyclent. À déposer en magasin ou en déchèterie. Points de collecte sur www.quefairedemesdechets.fr. Privilégiez la réparation ou le don de votre appareil!
Translation: This device, its accessories, and battery are recyclable. Drop off at store or recycling center. Collection points at www.quefairedemesdechets.fr. Prioritize repair or donation of your device!
scott-sports.com
