omthing.com
User Guide for omthing models including: EO005, 2ASDIEO005, EO005 AirFree Pods True Wireless Headphones, EO005, AirFree Pods True Wireless Headphones
Tiinlab Corporation EO005 omthing AirFree Pods True Wireless Headphones 2ASDIEO005 2ASDIEO005 eo005
File Info : application/pdf, 1 Pages, 2.46MB
DocumentDocumentEO005
96*116mm 105g : ±0.5mm
omthing AirFree Pods omthing AirFree Pods omthing AirFree Pods True Wireless Headphones User Guide
www.omthing.com
A 1403
Manufacturer: Tiinlab Acoustic Technology Limited. Address: Tianliao Building 1403, Zone A Tianliao Industrial
Park, Taoyuan Str., Nanshan Dist., Shenzhen, P.R. China
FCC ID: 2ASDIEO005
CMIIT IDXXXXXXXXXX
IC24662-EO005
XXXXXXXXXX
R XXX-XXXXXX
xxxxxxxxxxxxxx
/
2
5
TWS De Di De
Di Du
5
TWS (
/
TWS
6
1
1
/
/ 1 / 1
/
/
5
"Du Du"
Du
6
1
*
omthing AirFree Pods Du Du 5
15
6
1.5
QI 3.3V "Battery Low"1 3V 1
EO005 56 x 56 x 25 mm 4 55 ABS + PC + 32 SBC / AAC / APTX Bluetooth® 5.0 10 20HZ - 20KHZ 20mW
5 50% 25 Type-C 400mAh 1.5 5V 35mA 5V 500mA
*
1. 2. (0 60 0 - 45 3. 4. 5.
1. 2. 3 3.
omthing AirFree Pods RoHS2.0 (2011/65/EU)
(Pb) (Hg) (Cd) (Cr(VI)) PBB PBDE
SJ/T 11364
GB/T 26572
GB/T 26572
A 1403
omthing AirFree Pods 1. 7 2. omthing
7 15 1
omthing AirFree Pods
1.
2. 3. 4. 5.
omthing
omthing
omthing www.omthing.com ""400-992-0909
omthing
omthing
/
2
5
TWS De Di De
Di Du
5
TWS
/
TWS
6
1
1
/
/ 1 / 1
/
/
5
"Du Du"
Du
6
1
* ,
omthing AirFree Pods Du Du 5
15
6
1.5
QI 3.3V "Battery Low"1 3V 1
EO005 56 x 56 x 25 mm 4 55 ABS + PC + 32 SBC / AAC / APTX Bluetooth® 5.0 10 20HZ - 20KHZ 20mW
5 50% 25 Type-C 400mAh 1.5 5V 35mA 5V 500mA
*
1. 2. 060 0 - 45 3. 4. 5.
1. 2. 3 3.
omthing AirFree Pods RoHS2.0 (2011/65/EU)
(Pb)
(Hg)
(Cd)
(Cr(VI)) PBB PBDE
SJ/T 11364
GB/T 26572
GB/T 26572
A 1403
NCC
Please read this manual thoroughly before use of this product and retain it for future reference.
Product Diagram
Microphone Touch Control
Microphone
LED Indicator
Cord LED Indicator
Charging Port Note: Above illustration is for reference only. The real product may be slightly different due to product upgrades.
Operations and Functions
Function
Power On
Power Off
Pair the earbuds with your device
Status
Earbuds in the case
Operation
Voice Prompt
Take them out, they will turn on and enter pairing mode automatically
Earbuds out of the case
Tap and hold the Touch Control for 2 seconds to power them on. They will enter pairing mode automatically.
Place the earbuds into the case, the
Standby / playing Bluetooth connection will disconnect
music
Or you can tap and hold the Touch
Control for 5 seconds to turn off the
earbuds
Earbuds on
Enter pairing mode automatically
when the earbuds are successfully De Di
paired with each other
De Di
Du
LED Indicator
White and blue LEDs on for 1s at the same time
Blue LED on for 1s then off
LED indicator on one earbud will flash white and blue slowly, and that on the other earbud will flash white slowly
Earbuds off
Tap and hold the Touch Control for 5 seconds to enter pairing mode
LED indicator flashes blue and white slowly
Pair the two earbuds manually
Earbuds on but failed to pair with each other
Tap the Touch Control on both earbuds twice
LED indicator flashes blue and white fast
Clear pairing
history / reset
Earbuds on
Place the earbuds into the case, tap and hold the touch control on both earbuds simultaneously for 6s
Answer Phone Call
Incoming call
Hang Up
During a phone call
Decline Phone Call
Incoming call
Play / Pause Playing music
Previous Track
Standby / Playing music
Tap the Touch Control on either earbud once
Tap the Touch Control on either earbud twice
Tap the Touch Control on either earbud twice
Tap the Touch Control on either earbud once Tap and hold the Touch Control on the left earbud for 1s
White LED indicator flashes once every 5s
Function State
Next Track
Standby / Playing music
Volume +
Standby / Playing music
Volume -
Standby / Playing music
Action
Tap and hold the Touch Control on the right earbud for 1s
Prompt Voice
LED
Tap the Touch Control on the left earbud twice
Tap the Touch Control on the right earbud twice
two "DuDu"
will be heard
when reach
the highest
volume
White LED indicator
flashes once every 5s
Activate voice assistant
Earbuds
connected with your device and
Tap the Touch Control on either earbud three times
Du
not in a call
Powersaving mode
Standby (not connected to any devices)
Automatically power off if there is no connection in 6 mins
Blue indicator on for 1s then off
Note 1. If there is no sound in either of the earbuds, please put both earbuds back into the case and take
them out again to pair them with each other. 2. If they still won't connect, please pair them manually by tapping the Touch Control on both earbuds
twice.
Pairing the Earbuds with Your Device
1. When the earbuds are in pairing mode, the LED indicator on one earbud will flash white and blue slowly, and that on the other earbud will flash white slowly. .
2. Enable the Bluetooth function on your device. 3. Search and find "omthing AirFree Pods" in the Bluetooth connections. Tap on the name to connect. 4. When successfully connected, the white LED indicator will flash once every 5 seconds.
Auto Connection
The earbuds will try to pair with previously connected devices first when turned on. The reconnection duration is 15 seconds with the white indicator on one earbud flashing fast and the
light on the other earbud flashing slowly. They'll enter pairing mode once the reconnection failed.
Bluetooth Disconnection
When your device's Bluetooth function is disabled or the distance between your device and the earbuds is beyond the Bluetooth range, the earbuds will disconnect with your device and enter pairing mode with the indicator on one earbud flashing blue and white slowly and the light on the other earbud flashing white slowly. If there is no connection in 6 minutes, the earbuds will automatically turn off.
Charge
Charging the Earbuds Place the earbuds into the charging case, charging will start automatically. It takes around 1.5 hours to get it fully charged.
Charging the Case Connect the case to a power source via the charging port or place it onto a Qi wireless charging pad,
charging will start automatically. The LED indicator on the case will keep flashing when charged and keeps on once fully charged.
Note: Please charge the earbuds when the voice prompt "Battery Low" is heard.
CVC Noise Cancellation
Automatically be activated during a phone call.
Specification
Model: EO005 Dimensions: 56 x 56 x 25 mm Earbud Weight: aprox. 4 g Gross Weight: aprox. 55 g Material: ABS + PC + Nylon Impedance: 32 Codecs: SBC / AAC / aptX Bluetooth: Bluetooth® 5.0 Wireless Range: 10m Frequency Range: 20Hz - 20KHz Output: 20mW
Earbuds Playtime: approx. 5 Hours (50% Volume) Total Playtime: approx. 25 Hours Charging Port: Type-C Battery Capacity: 400mAh Charging Time: aprox. 1.5 Hours Earbuds Rated Input: 5V 35mA Case Rated Input: 5V 500mA Stereo Sound: Both Earbuds
* Above data is measured in laboratory and may vary depending on the usage status.
Safety Information
1. Never dismantle or alter this product under any circumstance to avoid fire hazards or damages to this product.
2. Do not expose this product to extreme temperatures (below 0¥ or above 60¥). The product operation ambient temperature is 0¥~45¥.
3. Do not use this product in thunderstorm weather in case of product malfunction or electric hazards. 4. Children under 6 years old should be under adult supervision when using this product. 5. If any ear discomfort occurs while wearing the earbuds, please consult a doctor to check whether
you are suitable to use in-ear headphones.
Tips
1. Please fully charge the earbuds before first use. 2. Please charge the earbuds if they are about to be idle for a long time (3 months and above). 3. Please charge the case with a charger made by an authorized third party.
CE
Declaration of Conformity Hereby, Tiinlab Acoustic Technology Limited declares that the radio equipment type omthing AirFree Pods True Wireless Headphones of EO005 is in compliance with Directive 2014/53/EU. The full text of the EU declaration of conformity is available at the following internet address:www.omthing.com RF exposure information: The device has been evaluated to meet general RF exposure requirement. The device can be used in portable exposure condition without restriction. Radiation Exposure Statement Power is so low that no RF exposure calculation is needed. Declaration for EU Compliance Operation Frequency/Max. EIRP: 2400-2483.5MHz, Left ear Max. EIRP is 8.53dBm, Right ear Max. EIRP is 8.62dBm.
Warning Replacement of a battery with an incorrect type that can defeat a safeguard (such as catching fire, explosion, leakage of corrosive electrolyte etc); Disposal of a battery into fire or a hot oven, or mechanically crushing or cutting of a battery, that can result in an explosion; Leaving a battery in an extremely high temperature surrounding environment that can result in an
explosion or the leakage of flammable liquid or gas; and A battery subjected to extremely low air pressure that may result in an explosion or the leakage of flammable liquid or gas.
The symbol indicates DC voltage.
RECYCLING
This product bears the selective sorting symbol for Waste electrical and electronic equipment (WEEE). This means that this product must be handled pursuant to European directive 2014/53/EU in order to be recycled or dismantled to minimize its impact on the environment. User has the choice to give his product to a competent recycling organization or to the retailer when he buys a new electrical or electronic equipment.
To prevent possible hearing damage, do not listen at high volume levels for long periods.
FCC
This equipment complies with FCC RF radiation exposure limits set forth for an uncontrolled environment This device complies with part 15 of the FCC rules. Operation is subject to the following two conditions: (1) this device may not cause harmful interference, and (2) this device must accept any interference received, including interference that may cause undesired operation. NOTE: The manufacturer is not responsible for any radio or TV interference caused by unauthorized modifications or changesto this equipment. Such modifications or changes could void the user's authority to operate the equipment. NOTE: This equipment has been tested and found to comply with the limits for a Class B digital device, pursuant to part 15 of the FCC Rules. These limits are designed to provide reasonable protection against harmful interference in a residential installation. This equipment generates uses and can radiate radio frequency energy and, if not installed and used in accordance with the instructions, may cause harmful interference to radio communications. However, there is no guarantee that interference will not occur in a particular installation. If this equipment does cause harmful interference to radio or television reception, which can be determined by turning the equipment off and on, the user is encouraged to try to correct the interference by one or more of the following measures: - Reorient or relocate the receiving antenna. - Increase the separation between the equipment and receiver. - Connect the equipment into an outlet on a circuit different from that to which the receiver is connected. - Consult the dealer or an experienced radio/TV technician for help.
IC
This device complies with Industry Canada license-exempt RSS standard(s). Operation is subject to the following two conditions: (1) this device may not cause interference, and (2) this device must accept any interference, including interference that may cause undesired operation of the device.Cet appareil est conforme avec Industrie Canada RSS exemptes de licence standard(s). Son fonctionnement est soumis aux deux conditions suivantes: (1) cet appareil ne peut pas provoquer d'interférences, et (2) cet appareil doit accepter toute interférence, y compris celles pouvant causer un mauvais fonctionnement de l'appareil. This Class B digital apparatus complies with Canadian ICES-003. Cet appareil numérique de la classe B est conforme à la norme NMB-003 du Canada.
This device has been tested for compliance with IC SAR values at a typical operating near the body. To ensure that RF exposure levels below the levels tested, use accessories with this equipment to maintain a minimum separation distance of 0 cm between the body of the user and the device. These accessories should not contain metallic components. It is possible that the accessories used close to the body that do not meet these requirements are not consistent with the SAR limits and it is advisable to avoid using them. Ce dispositif a été testé pour la conformité avec les valeurs SAR à un fonctionnement typique près du corps . Pour assurer que les niveaux d'exposition aux radiofréquences en deçà des niveaux testés, utiliser des accessoires avec cet équipement pour maintenir une distance de séparation minimale de 0 cm entre le corps de l'utilisateur et l'appareil. Ces accessoires ne doivent pas contenir des composants métalliques . Il est possible que les accessoires utilisés près du corps qui ne répondent pas à ces exigences ne sont pas compatibles avec les limites SAR et il est conseillé d'éviter de les utiliser.
KCC
1. .
2. ( )
R-R-tAt-EO005
LED-
LED-
e e
¥
¥
¥¥