Maxell EB-BT95 Dynamic True Wireless Earbuds

Model: EB-BT95

Specifications

Battery Capacity	(600mAh)
Charging Case Output Voltage	DC 5±0.25V 50mA*2
Charging Case Input Voltage	DC 5±0.25V 1A
Battery Capacity	Earbuds: 50mAh/3.7V Polymer Lithium Battery Charging Case: 600 mAh/3.7V Polymer Lithium Battery
Playback Time	2.5 hours for fully charged earbuds, up to 10 hours with a fully charged case
Standby Time	60 hours
Call Time	2.5 hours
Charging Time	Earbuds 1.5-2 hours, Charging Case 2-2.5 hours
Bluetooth Version	5.0

Charging

Charging the Case

Connect the USB charging cable to your computer's USB port and the Micro USB connector to the device's charging port. The LED light will flash blue rapidly. Full charging takes approximately 2 hours. When the battery is fully charged, all LEDs will light up in blue. The charging case can then charge the earbuds.

Illustration of the Maxell charging case. Features include LED indicator lights on the front, a power button on the side, and a Micro USB charging port (5V) on the back.

Charging the Earbuds

The earbud's red LED lights up while charging.

Place the earbuds into the charging case (ensure the "right" unit is placed in the "R" slot, and the "left" unit in the "L" slot) for automatic charging. The earbud's red LED will illuminate while charging. Full charging takes approximately 2 hours. When fully charged, the LED will turn blue. It will turn off after 1 minute.

When both earbuds are fully charged, the charging case will automatically turn off the charging function and enter standby mode.

Functions and Usage

Earbud Functions

The earbuds feature a multi-function button for various controls.

Illustration of a single Maxell earbud. Key components shown are: charging contacts at the base, an LED indicator light, a multi-function button (for power, play/pause, call control), and a microphone.

Powering On

Press and hold the power button on both the right and left earbuds for 3 seconds to power on. The LED light will flash red and blue alternately.

Pairing

Earbud to Earbud Pairing

After powering on, the left and right units will pair automatically. Upon successful pairing, you will hear a "Connected" sound prompt. The right earbud's LED will flash red and blue alternately, and the left earbud's LED will flash blue slowly. Powering both units is sufficient for automatic pairing.

Pairing with Device

Activate the Bluetooth function on your Bluetooth device (phone or music player). Refer to the manufacturer's instructions for enabling Bluetooth on your device.

Once Bluetooth is activated, select "MAXELL EB-BT95TWS" from the list of available Bluetooth devices. If required, enter the password "0000" to confirm and complete pairing.

Calls

Both units support voice calls.

Independent Earbud Use

If using only one earbud for listening to music, the audio will be in Mono mode.

Button Functions

Power On: Press and hold the power button on both the right and left units for 3 seconds.
Pairing: Automatic pairing of the two units.
Reject Incoming Call: Press and hold the Power button for 2 seconds to reject an incoming call.
Play/Pause: Briefly press any power button to pause music playback.
End Call: Briefly press any power button to end an ongoing call.
Redial Last Number: Double-tap any power button to redial the last number.

	Maxell EB-BT100 Solid Wireless Earbuds User Manual User manual for the Maxell EB-BT100 Solid Wireless Earbuds, detailing specifications, earphone overview, operation instructions, and troubleshooting.
	Maxell ONE Quick Response TWS Earbuds User Manual Comprehensive user manual for the Maxell ONE Quick Response TWS Earbuds (Model EB-BTONE). This guide covers unboxing, device overview, charging instructions, automatic and manual power on/off and pairing, reset procedures, voice prompts, and multi-function button (MFB) controls. Includes multilingual support information.
	Maxell B13-TW Bass True Wireless Earbuds - User Manual & Specifications User guide and specifications for the Maxell B13-TW Bass True Wireless earbuds, detailing features, operation, and compliance information.
	Maxell Tune Out True Wireless Earbuds User Manual User manual for Maxell Tune Out True Wireless Earbuds, covering specifications, functions, pairing, controls, warnings, and warranty information.
	Maxell Airlink Air Conduction Headphones User Manual (Model EB-ALBT140) A comprehensive user manual for the Maxell Airlink Air Conduction Headphones (Model EB-ALBT140). This guide provides detailed information on package contents, button functions, controls for power, Bluetooth pairing, music playback, calls, voice assistant, charging, how to wear the headphones, technical specifications, and important safety precautions.
	Maxell Bass 13 TWB True Wireless Earbuds with Mic - Product Overview Explore the Maxell Bass 13 TWB True Wireless Earbuds with Mic, offering 6 hours of music playback and 36 hours with the charging case. Featuring Bluetooth 5.0, customizable fit, and integrated controls for music and calls.
	Maxell AirLink Air Conduction Headphones User Manual User manual for the Maxell AirLink Air Conduction Headphones, covering package contents, button functions, controls, charging, wearing instructions, specifications, and important safety precautions.
	Maxell B13-HD1 Jelleez Bluetooth Earphones User Manual User manual for Maxell B13-HD1 Jelleez Bluetooth Earphones, detailing specifications, operation, charging, safety, warranty, and FCC compliance.