Razor MX125 Battery Replacement Instructions

Part #: W20136401003

Required Tools: (Not included)

A. Phillips screwdriver
B. 4 mm Allen wrench

CAUTION: To avoid potential shock or other injury, turn power switch OFF and disconnect charger before performing any assembly or maintenance procedures. Failure to follow these steps in the correct order may cause irreparable damage.

Step 1: Remove Battery Cover Screws

Using a Phillips screwdriver, remove the six (6) screws on the battery cover. There are three (3) screws on each side.

[Image Description: A hand is shown using a Phillips screwdriver to remove screws from the side of the Razor MX125 battery cover. Three screws are highlighted on one side.]

Step 2: Remove Battery Covers

Remove both battery covers and set them aside.

[Image Description: A hand is shown lifting off a black battery cover, revealing the battery compartment underneath.]

Step 3: Loosen Battery Bracket Bolts

Using a 4 mm Allen wrench, loosen and remove the two (2) hex bolts from the battery bracket.

[Image Description: A hand is shown using a 4mm Allen wrench to loosen a hex bolt securing the battery bracket.]

Step 4: Disconnect Battery

Locate and disconnect the battery from the controller.

[Image Description: A hand is shown disconnecting a white electrical connector from the battery terminal.]

Step 5: Remove Battery

Remove the battery from the unit.

[Image Description: A hand is shown lifting the old battery out of the battery compartment.]

Note on Battery Bracket Orientation

The longer side of the battery bracket should be positioned on the left and the shorter side on the right.

[Image Description: The metal battery bracket is shown, illustrating its shape and the placement of its two mounting points.]

Step 6: Reassemble

Reverse the procedures:

Insert new battery in place and connect it to the controller.
Re-attach the battery bracket and secure it with the two (2) hex bolts.
Re-attach the left and right battery covers with the six (6) screws.

Attention: Charge battery 12 hours before using.

	Razor MX125 Electric Motocross Bike User Manual and Safety Guide This guide provides essential information for the Razor MX125 Youth Sport Electric Motocross Bike, including assembly instructions, safety precautions, riding tips, charging procedures, and maintenance advice for a safe and enjoyable experience.
	Razor MX125 Charger Port Installation Guide Step-by-step instructions for installing a new charger port on the Razor MX125 electric dirt bike. Includes required tools, safety warnings, and detailed procedures.
	Razor MX125 Youth Sport Electric Motocross Bike User Manual and Safety Guide Comprehensive user manual and safety guide for the Razor MX125 Youth Sport Electric Motocross Bike. Includes assembly, charging, riding instructions, safety precautions, and maintenance.
	Razor MX125 Power Switch Installation Guide Step-by-step instructions for installing a new power switch on the Razor MX125 electric dirt bike, including required tools and safety precautions.
	Razor MX125 Controller Module Installation Guide Comprehensive guide for installing the controller module on a Razor MX125 electric dirt bike. Includes required tools, safety warnings, step-by-step instructions, and support contact information.
	Razor MX500 & MX650 Dirt Rocket Control Module Installation Instructions Step-by-step guide for installing a new control module on the Razor MX500 and MX650 Dirt Rocket electric dirt bikes. Includes tools required, safety precautions, and detailed instructions with visual aids.
	Razor MX125 Throttle Replacement Instructions Step-by-step guide for replacing the throttle on a Razor MX125 electric scooter, including required tools, safety precautions, and detailed textual descriptions of visual elements.
	Razor Dirt Rocket MX350/MX400 Owner's Manual & Safety Guide Comprehensive owner's manual for the Razor Dirt Rocket MX350 and MX400 electric dirt bikes. Includes assembly instructions, safety warnings, maintenance tips, troubleshooting, and warranty information.