IKEA UDDARP Washing Machine and Dryer
Safety Information
Warning! Before proceeding with installation, read the safety information in the User Manual.
The electrical, water, and gas installation and connection must be carried out by a qualified technician according to the manufacturer's instructions and in compliance with the local safety regulations.
Required Tools and Parts
Tools Required:
- [wrench] Wrench
- [gloves] Gloves
- [spirit level] Spirit level
Included Parts:
- A: Washers (4x)
- B: Drain hose
- C: Water inlet hose
- D: Hose connector
- Bracket (1x)
- Mounting screws (4x)
- Wall plugs (4x)
Dimensions and Placement
Appliance Dimensions:
- Height: Minimum 841 mm, Maximum 846 mm
- Width: 595 mm
- Depth: 580 mm
- Depth with door open: 1028 mm
Placement Clearances:
- Back: 45 mm
- Front: 5 mm
- Top: 15 mm
Stacking:
- It is permissible to stack a dryer on top of this washing machine.
- It is NOT permissible to stack this washing machine on top of a dryer. [❌ stacking washing machine on dryer]
Installation Steps
Step 1: Prepare for Wall Mounting
Attach the provided brackets to the back of the appliance using screws. Ensure the appliance is oriented correctly.
Step 2: Secure Appliance to Wall
Mount the brackets to the wall using appropriate screws and wall plugs. This step ensures the appliance is stable and safely secured.
Step 3: Connect Water and Power
Connect the water inlet hose (C) to the water tap and the appliance. Connect the drain hose (B) to the appliance and a suitable drain point.
Connect the power cord to the appliance and a grounded electrical outlet. Ensure the electrical connection is safe and compliant with local regulations.
Step 4: Level the Appliance
Adjust the appliance's feet to ensure it is stable and level. The adjustment for each foot should not exceed 5 mm.
Final Checks
Verify all connections (water, drain, power) are secure and that the appliance is stable and level.
Refer to the product information label on the back of the appliance for model and serial number details.
