TONEMAC N18 Bluetooth Headphones

Contents

This document serves as the English User Manual for the TONEMAC N18 Bluetooth Headphones. It covers important safety precautions, an introduction to the product, quick start instructions, controls and charging details, and specifications with warranty information.

(Note: The table of contents from the original PDF has been summarized into this introductory paragraph for conciseness and to avoid a separate TOC section.)

Important Safety Precautions

WARNING FOR HEADPHONES

For safe and correct use of earphones, read this manual before use. Keep the manual and safety information in a convenient place for future reference.

Before using this product, please read and save the enclosed warnings and safety instructions.

The possible results of incorrect use are marked by one of the two symbols: "WARNING" and "CAUTION", depending on the imminence of the danger and the severity of the damage.

• WARNING - Ignoring these warnings may cause severe injury or death as a result of an incorrect operation.
• CAUTION - Ignoring these cautions may cause moderate injury or property damage as a result of incorrect operation.

General Warnings

• Listening to audio at excessive volumes can cause permanent hearing damage. Overexposure to excessive sound levels can damage your ears, resulting in permanent noise-induced hearing loss (NIHL). Please use the following guidelines established by the Occupational Safety Health Administration (OSHA) on maximum time exposure to sound pressure levels before hearing damage occurs:

• Focus on your safety and that of others if you use the headphones while engaging in any activity requiring your attention, e.g., while riding a bicycle or walking in or near traffic, a construction site, or railroad. Remove the headphones or adjust your volume to ensure you can hear surrounding sounds, including alarms and warning signals.
• Use caution and follow applicable laws regarding mobile phone and headphone use if using the headphones for phone calls while driving. Some jurisdictions impose specific limitations on using such products while driving. Do not use the headphones for any other purpose while driving.
• Keep this product and its accessories out of reach of children under age 3. Handling or using by children may pose a risk of death or serious injury. Contains small parts and cords that may pose the risk of choking or strangulation.
• Do not place any naked flame sources on or near the headphones, such as lighted candles.

Cautions

• Do not attempt to modify this product. Doing so could result in personal injury and/or product failure.
• Do not drop, sit on, or allow the headphones to be immersed in water, otherwise, the headphone's failures may result.
• Do not subject the headphones to extreme force and do not pull on the cable, as failures may result.
• Keep the microphone dry and avoid exposure to extreme temperatures and humidity.
• Stop using the earphones immediately if they are causing great discomfort, irritation, rash, discharge, or any other uncomfortable reaction.
• If you are currently receiving ear treatment, consult your physician before using this device.

Introducing TONEMAC N18

This section describes the components of the TONEMAC N18 Bluetooth Headphones.

• 1. Ear Tips: The parts that fit into the ear canal for comfort and sound isolation.
• 2. Multi-Function Button: A primary button used for various controls like play/pause, answering calls, and power.
• 3. Volume + Button: Increases the volume or skips to the next track.
• 4. Volume - Button: Decreases the volume or skips to the previous track.
• 5. ENC Noise-Cancelling Microphone: Microphone designed to reduce background noise during calls.
• 6. Indicator Light: Provides visual feedback on the headphone's status (e.g., pairing, charging, power).
• 7. USB-C Charging Port: The port used to charge the headphones.

Quick Start

1. Insert Earbuds: Carefully insert the earbuds into your ears and adjust the angle for a comfortable fit. The "L" icon indicates the left earbud, and the "R" icon indicates the right earbud.

   [Diagram description: An illustration shows an earbud being inserted into an ear, with an arrow indicating the angle adjustment.]

2. Power On and Pairing: Press and hold the multi-function button (2) for 3 to 5 seconds until the indicator LED (6) blinks red and white, indicating it is in pairing mode.

   [Diagram description: An illustration shows the control unit of the headphones with the multi-function button highlighted, and the indicator light blinking red and white.]

3. Connect via Bluetooth: Turn on Bluetooth on your device (smartphone, tablet, etc.) and select "TONEMAC N18" from the list of available devices.

4. Enjoy Music: Once connected, you will hear an indication voice "Connected", and the LED indicator (6) will blink white. You can now enjoy your music.

   [Diagram description: An illustration shows a smartphone displaying a Bluetooth connection to "TONEMAC N18".]

Controls & Charging

Controls

The TONEMAC N18 headphones can be controlled using the buttons on the device.

Charging

To charge the TONEMAC N18 headphones:

1. Connect the small end of the USB-C Charging Cable to the USB-C port (7) on the headphones.
2. Connect the other end of the cable to a USB charger or a powered-on computer.

Charging Indicator:

• While charging: The indicator light (6) will be solid red. ?
• Fully charged: The indicator light (6) will be solid blue. ?

[Diagram description: Two illustrations show the charging process: one with a USB-C cable connecting to the headphones and a separate charger (labeled "Micro-USB Charger (not supplied)"), and another showing the cable connecting to a powered-on computer.]

Specifications & Warranty

Indicator Status

This table details the LED and voice/tone indicators for various headphone states.

Specifications

Limited Warranty

TONEMAC Technology Co., Ltd (“TONEMAC”) warrants this product against defects in material or workmanship for the periods and as set forth below when purchased directly from TONEMAC or a TONEMAC Retailer. Under this Limited Warranty, TONEMAC will, at its option, (i) repair the product using new or refurbished parts or (ii) replace the product with a new or refurbished product. For purposes of this Limited Warranty, “refurbished” means a product or part that has been returned to its original specifications. In the event of a defect, these are your exclusive remedies.

For 1 year from the original date of purchase of the product (“Labor Warranty”), TONEMAC will, at its option, repair or replace with a new or refurbished product, the product determined to be defective. This warranty is not transferable. This warranty does not apply in cases of abuse or misuse of the product, use contrary to TONEMAC's instruction, ordinary wear, and tear, an act of God, negligent use, purchase from a party other than TONEMAC or a TONEMAC-authorized reseller, unauthorized repair, or modification of the product.

ALL IMPLIED WARRANTIES OF MERCHANTABILITY OR FITNESS FOR A PARTICULAR PURPOSE ARE HEREBY DISCLAIMED TO THE EXTENT PERMITTED UNDER APPLICABLE LAWS AND, TO THE EXTENT NOT PERMITTED, ARE HEREBY LIMITED TO THE DURATION AND TERMS OF THIS WARRANTY. TONEMAC ALSO HEREBY DISCLAIMS ALL LIABILITY FOR INCIDENTAL, SPECIAL, OR CONSEQUENTIAL DAMAGES.

Some states do not allow limitations on how long an implied warranty lasts or the exclusion or limitation of incidental or consequential damages, so the above limitation may not apply to you. This warranty gives you specific legal rights, and you may have other rights which vary from state to state.

This warranty does not restrict the rights of the consumer mandated under applicable laws.