Salus Smart Plug
Model: SPE600
Installation Manual
Introduction
The Salus SPE600 Smart Plug connects directly to an open electrical outlet, giving users control over any device plugged into it. Salus offers standardized Smart Plugs for EU, UK, and U.S. This product must be used with the Universal Gateway (UGE600) and the Salus Smart Home App. For the PDF version of the manual, visit www.salus-smarthome.com.
Product Compliance
This product complies with the essential requirements and other relevant provisions of the following EU Directives: 2014/30/EU, 2014/35/EU, 2014/53/EU, and 2011/65/EU. The full text of the EU Declaration of Conformity is available at: www.saluslegal.com.
Safety Information
Use in accordance with regulations. Designed for indoor use only. Keep your device completely dry. Disconnect your device before cleaning it with a dry towel.
Technical Specifications:
- Voltage: 230V AC 50Hz
- Amperage: Max 16 Amp
Setup Instructions
Step 1: Initialization
When first powered on, the Smart Plug's LED indicator will start flashing red. This indicates it is ready for initialization.
Steps 2-5: Pairing via App
Follow the on-screen instructions within the Salus Smart Home App to pair the device. The app guides users through adding new equipment, selecting the Smart Plug, and connecting it to the network. The app interface shows navigation menus like 'Home', 'All equipment', 'Settings', 'Help', and 'Logout'.
Download the Salus Smart Home App from [App Store] or [Google Play].
Step 6: Connection Complete
Once the Smart Plug is successfully connected and paired, the LED indicator will stop flashing.
Control
Control the Smart Plug via the app using the ON/OFF toggle.
Exit Gateway / Reset
To exit gateway mode or reset the device, press and hold the button on the Smart Plug for 10 seconds. The red LED will flash 5 times and then turn off.
Contact & Compliance Information
Distributed by: Sysclima Sistemas y Soluciones Climáticas, Polígono La Serna, Calle C, Nave 6.14, 31500 Tudela, Navarra, Spain.
Imported by: QL CONTROLS Sp. z o.o. Sp. k., ul. Rolna 4, 43-262 Kobielice.
Produced by: Salus Limited, 6/F, Building 20E, Phase 3, Hong Kong Science Park, 20 Science Park East Avenue, Shatin, New Territories, Hong Kong.
Salus Controls is a member of the Computime Group.
This manual is intended to provide clear and simple instructions. However, it is subject to modification due to possible printing errors or future technical changes.
Certifications: ISO 9001 certified, EAC certified, CE certified.
