Download for KC410S | TP-Link
Pan/Tilt Camera User Guide (PDF) Kasa Smart TP-Link Kasa,2K,QHD,Security,Camera,Pan/Tilt,Starlight,Sensor,for,Color,Night,Vision,Motion,Detection,for,Baby,&,Pet,Monitor,2-Way,Audio,Cloud,&,SD,Card,Storage,Works,with,Alexa,&,Google,Home,(KC410S),White,New,2K,QHD,B0C6YYJ4W2,B08GHX9G5L,B08ZXJJTYJ,B0BXMSS8Z7
User Guide
Kasa Spot Pan Tilt, 24/7 Recording
© 2023 TP-Link 1910013540 REV1.1.0
Contents
About This Guide································································· 1 Introduction············································································ 2 Appearance············································································ 3 Insert a microSD Card······················································· 4 Set Up Your Camera··························································· 5 Authentication······································································· 7
About This Guide
This guide provides a brief introduction to the Kasa Spot Pan Tilt, as well as regulatory information. Features available in Kasa Smart may vary by model and software version. Kasa Smart availability may also vary by region or ISP. All images, steps, and descriptions in this guide are only examples and may not reflect your actual Kasa Smart experience.
Conventions
In this guide, the following convention is used:
Convention Description
Teal
Key information appears in teal, including management page text such as menus, items, buttons and so on.
Underline Hyperlinks are in teal and underlined. You can click to redirect to a website.
More Info
· Specifications can be found on the product page at https://www.tp-link.com. · Our Technical Support and troubleshooting information can be found at https://www.tp-link.com/support/. · A TP-Link Community is provided for you to discuss our products at https://community.tp-link.com. · Frequently Asked Questions (FAQs) can be found at https://www.tp-link.com/support/faq/.
1
Introduction
With the Kasa Spot Pan Tilt connected to your home network, you can get the full picture of any space in your apartment, dorm or home. With a 360° horizontal view and 113° vertical view, the Pan Tilt has everything covered. With Motion Tracking and Patrol Mode, track activity from beginning to end and set multiple distinct viewpoints for your camera to monitor at set intervals. · Crystal Clear Video Sharp and clear 4MP Full HD provides high-quality video right in the palm of your hand. · Pan and Tilt Swipe up, down, left and right on your phone to rotate and set the camera's point of view. · Motion Tracking When motion activity is detected, Kasa Spot Pan Tilt tracks and follows the subject to keep it within the camera's field of view. · Cloud Storage Plans Upgrade your Kasa Care subscription plan and enjoy video recordings for up to 30 days. · Patrol Mode Set 4 distinct viewpoints and program your pan tilt camera to keep an eye on each region at intervals of your choosing. · Night Vision Even in the dark, the camera has Night Vision up to 30 feet. Never miss a thing at night and still get the same high-quality video you're used to. · Instant Activity Alerts No need to check your Kasa Spot Pan Tilt throughout the day. Get automatic alerts when it detects motion. Take quick
action when you see your pet on the couch, a roommate walking through your room, or an intruder enter your front door. · Two-Way Audio - Use crisp two-way audio to communicate with nosy roommates, family or even mischievous pets. · Activity Zones - Control what alerts you receive by creating up to 16 custom activity zones, at no charge, around areas that are important to you. · 24/7 Recording - Support continuous video recording with a SD card inserted to your Kasa Spot Pan Tilt.
113° Vertical View
2
Appearance
Kasa Spot Pan Tilt has a system LED that changes color according to its status, a lens, microphone, speaker, micro USB port, a SD card slot and a RESET button. Refer below for details.
System LED
· Solid amber: Rebooting
· Alternating amber and green: Ready for setup
· Flashing red: Connecting to Wi-Fi
· Flashing green: Connected to Wi-Fi
· Solid green: Bound to Cloud
· Flashing amber: Resetting to SoftAP/Factory mode
Micro SD RESET
Lens
Microphone
Built-in microphone.
Note: Do NOT insert objects into the hole.
Speaker
Micro USB Port microSD Slot
The sound comes Connect the power Insert a microSD
out of the camera. cord provided.
card for recording.
RESET Button Tilt your camera lens up to find the RESET button.
· Press and hold for 3s to 15s: Reset Wi-Fi connection
· Press and hold for over 15s: Reset to Factory mode
3
Insert a microSD Card
Kasa provides options for your video recording. You can subscribe to a Kasa Care Plan to store 30-day video clips to the cloud for added backup and more beneficial functions. Or you can save the footage continuously on a microSD card* and play back with your Kasa Smart app. The camera will overwrite the oldest files when the microSD card memory is full. See the instructions below to insert a microSD card to your Kasa Spot. *microSD card not included. 1. Roll up the lens of your camera and find the microSD card slot. 2. Holding the card in the correct orientation, carefully insert the microSD card into the slot. Push in the microSD card until you hear a clicking sound.
Micro SD RESET
4
microSD
Set Up Your Camera
Follow the steps below to get started with your new camera.
Step 1. Download Kasa
Get the Kasa Smart app from the App Store or Google Play, or by scanning the QR code below.
Step 2. Log In
Open the app, and log in with your TP-Link ID. If you don't have an account, create one first.
Step 3. Start Setup
Tap the button in the Kasa app and select Cameras > Kasa Spot Pan Tilt.
5
Step 4. Configure Camera
Follow app instructions to configure your camera and add it to your home network.
Step 5. Place Camera
Place your camera on a flat surface, or install it on a wall or ceiling with the provided indicator label and mounting screws.
· For soft surface: Directly screw the screws in. · For cement wall: Drill two 6mm holes with the help of indicator label, insert the plastic
expansion tubes into holes and screw the mounting screws into the expansion tubes.
Note: Your camera might use one of the following two types of screws.
3.5
n 6 1.8
30
UNIT: mm
n 7.5
2
20
3.5
UNIT: mm
6
Authentication
FCC compliance information statement
Product Name: Kasa Spot Pan Tilt, 24/7 Recording
Model Number: KC410S/KC411S
Component Name Model
FCC Identifier number
AC ADAPTER
A8-501000
NA
Responsible party:
TP-Link USA Corporation
Address: 10 Mauchly, Irvine, CA 92618
Website: http://www.tp-link.com/us/
Tel: +1 626 333 0234
Fax: +1 909 527 6804
E-mail: sales.usa@tp-link.com
This equipment has been tested and found to comply with the limits for a Class B digital device, pursuant to part 15 of the FCC Rules. These limits are designed to provide reasonable protection against harmful interference in a residential installation. This equipment generates, uses and can radiate radio frequency energy and, if not installed and used in accordance with the instructions, may cause harmful interference to radio communications. However, there is no guarantee that interference will not occur in a particular installation. If this equipment does cause harmful interference to radio or television reception, which can be determined by turning the equipment off and on, the user is encouraged to try to correct the interference by one or more of the following measures:
· Increase the separation between the equipment and receiver.
· Connect the equipment into an outlet on a circuit different from that to which the receiver is connected.
· Consult the dealer or an experienced radio/ TV technician for help.
This device complies with part 15 of the FCC Rules. Operation is subject to the following two conditions: 7
1. This device may not cause harmful interference. 2. This device must accept any interference received, including interference that may cause undesired operation. Any changes or modifications not expressly approved by the party responsible for compliance could void the user's authority to operate the equipment. Note: The manufacturer is not responsible for any radio or TV interference caused by unauthorized modifications to this equipment. Such modifications could void the user's authority to operate the equipment.
FCC RF Radiation Exposure Statement
This equipment complies with FCC RF radiation exposure limits set forth for an uncontrolled environment. This device and its antenna must not be co-located or operating in conjunction with any other antenna or transmitter. "To comply with FCC RF exposure compliance requirements, this grant is applicable to only Mobile Configurations. The antennas used for this transmitter must be installed to provide a separation distance of at least 20 cm from all persons and must not be co-located or operating in conjunction with any other antenna or transmitter." We, TP-Link USA Corporation, has determined that the equipment shown as above has been shown to comply with the applicable technical standards, FCC part 15. There is no unauthorized change is made in the equipment and the equipment is properly maintained and operated.
Issue Date: 2023-09-28
8
FCC compliance information statement Product Name: AC ADAPTER Model Number: 3530501354 A8-501000 Responsible party: TP-Link USA Corporation Address: 10 Mauchly, Irvine, CA 92618 Website: http://www.tp-link.com/us/ Tel: +1 626 333 0234 Fax: +1 909 527 6804 E-mail: sales.usa@tp-link.com
This equipment has been tested and found to comply with the limits for a Class B digital device, pursuant to part 15 of the FCC Rules. These limits are designed to provide reasonable protection against harmful interference in a residential installation. This equipment generates, uses and can radiate radio frequency energy and, if not installed and used in accordance with the instructions, may cause harmful interference to radio communications. However, there is no guarantee that interference will not occur in a particular installation. If this equipment does cause harmful interference to radio or television reception, which can be determined by turning the equipment off and on, the user is encouraged to try to correct the interference by one or more of the following measures: · Increase the separation between the equipment and receiver. · Connect the equipment into an outlet on a circuit different from that to which the receiver is connected. · Consult the dealer or an experienced radio/ TV technician for help. This device complies with part 15 of the FCC Rules. Operation is subject to the following two conditions: 1. This device may not cause harmful interference. 2. This device must accept any interference received, including interference that may cause undesired operation. Any changes or modifications not expressly approved by the party responsible for compliance could void the user's authority to operate the equipment. Note: The manufacturer is not responsible for any radio or TV interference caused by unauthorized modifications to this equipment. Such modifications could void the user's authority to operate the equipment.
9
We, TP-Link USA Corporation, has determined that the equipment shown as above has been shown to comply with the applicable technical standards, FCC part 15. There is no unauthorized change is made in the equipment and the equipment is properly maintained and operated.
Issue Date: 2023-09-28
10
CE Mark Warning
This is a class B product. In a domestic environment, this product may cause radio interference, in which case the user may be required to take adequate measures.
OPERATING FREQUENCY (the maximum transmitted power)
2400 MHz -2483.5 MHz(20dBm)
EU Declaration of Conformity
TP-Link hereby declares that the device is in compliance with the essential requirements and other relevant provisions of directives 2014/53/EU, 2009/125/EC, 2011/65/EU and (EU)2015/863. The original EU Declaration of Conformity may be found at https://www.tp-link.com/en/ce/
RF Exposure Information
This device meets the EU requirements (2014/53/EU Article 3.1a) on the limitation of exposure of the general public to electromagnetic fields by way of health protection. The device complies with RF specifications when the device used at 20 cm from your body. Restricted to indoor use.
UKCA Mark
UKCA Declaration of Conformity
TP-Link hereby declares that the device is in compliance with the essential requirements and other relevant provisions of the Radio Equipment Regulations 2017. The original UK Declaration of Conformity may be found at https://www.tp-link.com/support/ukca/.
11
Canadian Compliance Statement
This device contains licence-exempt transmitter(s)/receiver(s) that comply with Innovation, Science and Economic Development Canada's licenceexempt RSS(s). Operation is subject to the following two conditions: 1. This device may not cause interference. 2. This device must accept any interference, including interference that may cause undesired operation of the device. L'émetteur/récepteur exempt de licence contenu dans le présent appareil est conforme aux CNR d'Innovation, Sciences et Développement économique Canada applicables aux appareils radio exempts de licence. L'exploitation est autorisée aux deux conditions suivantes: 1. l'appareil ne doit pas produire de brouillage; 2. l'utilisateur de l'appareil doit accepter tout brouillage radioélectrique subi, meme si le brouillage est susceptible d'en compromettre le
fonctionnement.
Radiation Exposure Statement:
This equipment complies with IC radiation exposure limits set forth for an uncontrolled environment. This equipment should be installed and operated with minimum distance 20cm between the radiator & your body.
Déclaration d'exposition aux radiations:
Cet équipement est conforme aux limites d'exposition aux rayonnements IC établies pour un environnement non contrôlé. Cet équipement doit être installé et utilisé avec un minimum de 20 cm de distance entre la source de rayonnement et votre corps.
Industry Canada Statement
CAN ICES-3 (B)/NMB-3(B)
Korea Warning Statements:
.
NCC Notice & BSMI Notice:
12
· · · · · ·
Equipment name Kasa Spot Pan Tilt, 24/7 Recording
Unit
PCB
Lead (Pb)
-- -
Mercury
(Hg)
Type designation (Type) KC410S/KC411S
Restricted substances and its chemical symbols
Cadmium
(Cd)
Hexavalent chromium
(Cr+6)
Polybrominated
biphenyls (PBB)
Polybrominated diphenyl ethers
(PBDE)
13
1. 0.1 wt % 0.01 wt % Note 1"Exceeding 0.1 wt %" and "exceeding 0.01 wt %" indicate that the percentage content of the restricted substance exceeds the reference percentage value of presence condition. 2. Note 2" " indicates that the percentage content of the restricted substance does not exceed the percentage of reference value of presence. 3.- Note 3The "-" indicates that the restricted substance corresponds to the exemption.
, .
Safety Information
· Keep the device away from water, fire, humidity or hot environments. · Do not attempt to disassemble, repair, or modify the device. If you need service, please contact us. · Do not use damaged charger or USB cable to charge the device. · Do not use any other chargers than those recommended · Do not use the device where wireless devices are not allowed. · Adapter shall be installed near the equipment and shall be easily accessible. · Use only power supplies which are provided by manufacturer and in the original packing of this product. If you have any questions, please don't
hesitate to contact us. · Operating Temperature: 0°C~40°C (32°F~104°F)
14
Please read and follow the above safety information when operating the device. We cannot guarantee that no accidents or damage will occur due to improper use of the device. Please use this product with care and operate at your own risk.
Explanation of the symbols on the product label
Note: Symbols may vary from products. Symbol
Class II equipment
Explanation
Class II equipment with functional earthing Alternating current Direct current Polarity of d.c. power connector For indoor use only
Dangerous voltage
Caution, risk of electric shock
Energy efficiency Marking
Protective earth 15
Symbol
Earth Frame or chassis Functional earthing Caution, hot surface Caution Operator's manual Stand-by "ON"/"OFF" (push-push) Fuse Fuse is used in neutral N
Explanation
16
Symbol
m µ
Explanation RECYCLING This product bears the selective sorting symbol for Waste electrical and electronic equipment (WEEE). This means that this product must be handled pursuant to European directive 2012/19/EU in order to be recycled or dismantled to minimize its impact on the environment. User has the choice to give his product to a competent recycling organization or to the retailer when he buys a new electrical or electronic equipment.
Caution, avoid listening at high volume levels for long periods
Disconnection, all power plugs
Switch of mini-gap construction
Switch of micro-gap construction (for US version) Switch of micro-gap / micro-disconnection construction (for other versions except US)
Switch without contact gap (Semiconductor switching device)
17
Adobe PDF Library 15.0 Adobe InDesign 15.0 (Windows)