14 nov. 2022 — video equipment, calculators, wireless telephones, game consoles, ... IBM Environmental Notices and User Guide, either hardcopy, DVD, or CD, ...
IBM Engineering Specification 46G3772 Baseline Environmental Requirements
For Supplier Deliverables to IBM
Latest Update: November 14, 2022
Written by:
Rebecca Nadeau Morones Product Environmental Stewardship IBM Systems Development rlnadeau@us.ibm.com
November 14, 2022
Reviewed and
Amanda Staples
Approved by:
Manager, Systems Compliance High End Servers, Systems Environmental Management,
ESD Controls and ASIC Tools
IBM Systems Development
Supersedes All Previous Updates
November 14, 2022
PN 46G3772 Page 1 of 197 EC J85151 13MAY05
EC 899569 04NOV93 EC G32590 08FEB06
EC 899773 07DEC94 EC L04925B 11JAN07
EC F15040 25AUG97 EC L04925M 01AUG07
EC F73298 02SEP99 EC L04925N 19FEB08
EC F74336 05SEP00 EC L05962X 08AUG08
EC F72950 23JAN02 EC L79598 25FEB09
EC H64064 13MAY03 EC N24534E 02OCT09
EC H17205 29JUL03 EC L79598A 22FEB10
EC L79598B 22SEPT10
EC L79598C 27APR2011
EC L79598D 6SEPT2011
EC N31517Y 26MAR2012
ECN31946T 19APR2013
ECN33076 5DEC2013
ECN33076A 16MAY2014
ECN46883 17OCT2014
ECP02692 26MAY2015
ECO P02838 15OCT2015
ECOP17505 21APR2016
ECO P17633 1OCT2016
ECOP17764 20MAR2017
ECOP17905 16OCT2017
ECOP17958 Jan 25, 2018
ECOP44540 June 11, 2018
ECOP44680 Mar 5, 2019
ECOP44794 Aug 9, 2019
ECO P44877 15Feb2020
ECO P45188 1Sept2020
ECO P45272 9Mar2021
ECO P45379 18Oct2021
ECO 45443 4April2022
ECO P45475 14Nov2022
This document is the property of IBM. Its use is authorized only for responding to a request for quotation or for the performance of work for IBM. All questions must be referred to the IBM Procurement Department requesting the quotation or performance of work.
Engineering Specification
Page 2 of 197
Contents
1 Scope ......................................................................................................................................................................4
1.1 Objectives........................................................................................................................................................4
1.2 Definitions.......................................................................................................................................................4
1.3 Application......................................................................................................................................................9
1.4 Document Administration ...............................................................................................................................9
1.5 IBM Documents ..............................................................................................................................................9
2 Requirements ......................................................................................................................................................10
2.1 Prohibited From Use .....................................................................................................................................10
2.1.1 Restrictions for Hardware Deliverables, Parts, Products, Chemicals, Substances, and Preparations .10
2.1.2 Additional Restrictions and Requirements for Substances, Mixtures, Preparations, Field Use
Materials, and Chemical Product Supplies ..........................................................................................................24
2.2 Product Content Declarations........................................................................................................................28
2.2.1 RoHS Reporting .....................................................................................................................................28
2.2.2 Other Reportable Substances .................................................................................................................29
2.2.3 Substances of Very High Concern (SVHC) in Articles - Requirements..................................................36
2.3 Marking of Products and Parts ......................................................................................................................47
2.3.1 Product/Part...........................................................................................................................................47
2.3.2 Plastic Part Marking..............................................................................................................................50
2.4 Additional Requirements for Batteries ..........................................................................................................52
2.4.1 Battery Content Restrictions ..................................................................................................................52
2.4.2 Product Design, Management Plans, and Labeling Requirements for Batteries ...................................53
2.5 Requirement for Decorative Metal Finishing ................................................................................................60
2.6 Requirements for Parts and Products Containing Mercury ...........................................................................60
2.7 Product Chemical Emissions.........................................................................................................................62
2.8 WEEE Marking .............................................................................................................................................62
2.8.1 Affected Products and Jurisdictions.......................................................................................................62
2.8.2 WEEE Marking Elements, including Date of Manufacture ...................................................................62
2.9 Electrical and Electronic Products and Electronics Information Products Mark and Table..........................63
2.9.1 People's Republic of China....................................................................................................................63
2.9.2 Taiwan....................................................................................................................................................69
2.10 Environmental Notifications for Customer Hardware Publications ..............................................................74
2.11 Removed .......................................................................................................................................................74
2.12 Product Energy Requirements.......................................................................................................................74
2.12.1
Monitors, Electronic Displays, Control Panels, Status Displays, etc. ............................................74
2.12.2
External Power Supplies and Adapters...........................................................................................90
2.12.3
Laptops, Notebooks.......................................................................................................................108
2.12.4
Workstations .................................................................................................................................109
2.12.5
Switches ........................................................................................................................................111
2.12.6
Routers ..........................................................................................................................................112
2.12.7
Motors ...........................................................................................................................................113
2.12.8
Water Pumps.................................................................................................................................119
2.12.9
Fans ..............................................................................................................................................121
2.12.10 Modems .........................................................................................................................................123
2.12.11 Battery Chargers (including Battery Back-up Units and Uninterruptible Power Supplies) .........124
2.12.12 Computers, Small Scale Servers, Servers, Storage Products, and peripherals.............................129
2.12.13 Removed........................................................................................................................................135
2.12.14 EMC Class B Equipment...............................................................................................................135
2.12.15 Desktop computers........................................................................................................................138
2.12.16 Servers and Data Storage Products ..............................................................................................139
2.12.17 Compressors .................................................................................................................................144
PN 46G3772 Page 2 of 197 EC J85151 13MAY05
EC 899569 04NOV93 EC G32590 08FEB06
EC 899773 07DEC94 EC L04925B 11JAN07
EC F15040 25AUG97 EC L04925M 01AUG07
EC F73298 02SEP99 EC L04925N 19FEB08
EC F74336 05SEP00 EC L05962X 08AUG08
EC F72950 23JAN02 EC L79598 25FEB09
EC H64064 13MAY03 EC N24534E 02OCT09
EC H17205 29JUL03 EC L79598A 22FEB10
EC L79598B 22SEPT10
EC L79598C 27APR2011
EC L79598D 6SEPT2011
EC N31517Y 26MAR2012
ECN31946T 19APR2013
ECN33076 5DEC2013
ECN33076A 16MAY2014
ECN46883 17OCT2014
ECP02692 26MAY2015
ECO P02838 15OCT2015
ECOP17505 21APR2016
ECO P17633 1OCT2016
ECOP17764 20MAR2017
ECOP17905 16OCT2017
ECOP17958 Jan 25, 2018
ECOP44540 June 11, 2018
ECOP44680 Mar 5, 2019
ECOP44794 Aug 9, 2019
ECO P44877 15Feb2020
ECO P45188 1Sept2020
ECO P45272 9Mar2021
ECO P45379 18Oct2021
ECO 45443 4April2022
ECO P45475 14Nov2022
This document is the property of IBM. Its use is authorized only for responding to a request for quotation or for the performance of work for IBM. All questions must be referred to the IBM Procurement Department requesting the quotation or performance of work.
Engineering Specification
Page 3 of 197
2.13 Requirements for Product Take-Back .........................................................................................................145 2.14 Requirements for RoHS ..............................................................................................................................145 2.15 Requirements for modular refrigeration units .............................................................................................154 2.16 Requirements for Original Equipment Manufacturer designed Computer Servers.....................................155 3 Notification Procedures....................................................................................................................................158 4 Removed............................................................................................................................................................158 5 Revision History ...............................................................................................................................................158
Tables
Table 1. Prohibited from Use in Hardware Deliverables, Parts, Products, Chemicals, Mixtures, Substances, and Preparations........................................................................................................................................................11 Table 2. Prohibited in Substances, Mixtures, Preparations, Field Use Materials, and Chemical Product Supplies ....................................................................................................................................................................... 25 Table 3. Thresholds for reporting of RoHS substances.........................................................................................28 Table 4a. Other Reporting Requirements - Substances .......................................................................................30 Table 4b. Other Reporting Requirements - Parts, Products, Components, Commodities..................................36 Table 5. Reporting of Substances of Very High Concern .....................................................................................37 Table 6. Commonly Used Resins .............................................................................................................................51 Table 7. Examples of Completed Plastic Part Markings.......................................................................................51 Table 8. Battery Content Restrictions.....................................................................................................................52 Table 9. Limited Summary of Battery Management Plan Requirements by Jurisdiction................................53 Table 10. Text for Battery Marking for the U.S. Battery Management Act .......................................................55 Table 11. Battery Label Requirements for Japan..................................................................................................57 Table 12. Mercury Added Product Labeling Information - US ...........................................................................61 Table 13. Hazardous Substances and Concentration Limits for China EEP Regulation....................................64 Table 14. Sample IBM EPUPs and Corresponding Label Part Numbers ............................................................66 Table 15. Format and Example of a Toxic and Hazardous Substances or Elements Table................................67 Table 16. Part Names for use in a Toxic and Hazardous Substances or Elements Table for IBM Logo Products and Parts. ...................................................................................................................................................67
Figures
Figure 1. Collection and heavy metal content marking for a lead acid battery..........................................................55 Figure 2. Three chasing arrows symbol from the U.S. Battery Management Act .....................................................55 Figure 3. Example of China Mark Logo for batteries................................................................................................56 Figure 4. Four-in-One recycling symbol and words for Taiwan................................................................................56 Figure 5. The WEEE Mark ........................................................................................................................................63 Figure 6. Mark I.........................................................................................................................................................65 Figure 7. Example of Mark II. ...................................................................................................................................66 Figure 8. Example of a China Energy Efficiency Label for Computer Monitors ......................................................75 Figure 9. Example of a warning logo.........................................................................................................................76 Figure 10. Example of CE conformity marking. .....................................................................................................137
PN 46G3772 Page 3 of 197 EC J85151 13MAY05
EC 899569 04NOV93 EC G32590 08FEB06
EC 899773 07DEC94 EC L04925B 11JAN07
EC F15040 25AUG97 EC L04925M 01AUG07
EC F73298 02SEP99 EC L04925N 19FEB08
EC F74336 05SEP00 EC L05962X 08AUG08
EC F72950 23JAN02 EC L79598 25FEB09
EC H64064 13MAY03 EC N24534E 02OCT09
EC H17205 29JUL03 EC L79598A 22FEB10
EC L79598B 22SEPT10
EC L79598C 27APR2011
EC L79598D 6SEPT2011
EC N31517Y 26MAR2012
ECN31946T 19APR2013
ECN33076 5DEC2013
ECN33076A 16MAY2014
ECN46883 17OCT2014
ECP02692 26MAY2015
ECO P02838 15OCT2015
ECOP17505 21APR2016
ECO P17633 1OCT2016
ECOP17764 20MAR2017
ECOP17905 16OCT2017
ECOP17958 Jan 25, 2018
ECOP44540 June 11, 2018
ECOP44680 Mar 5, 2019
ECOP44794 Aug 9, 2019
ECO P44877 15Feb2020
ECO P45188 1Sept2020
ECO P45272 9Mar2021
ECO P45379 18Oct2021
ECO 45443 4April2022
ECO P45475 14Nov2022
This document is the property of IBM. Its use is authorized only for responding to a request for quotation or for the performance of work for IBM. All questions must be referred to the IBM Procurement Department requesting the quotation or performance of work.
Engineering Specification
Page 4 of 197
Scope
1 Scope
1.1 Objectives
IBM Engineering Specification (ES) 46G3772 establishes baseline environmental requirements for all Deliverables where this specification is referenced in a Statement of Work, print, contract or other procurement documents. ES 46G3772 implements IBM's environmental policy objectives and contains some, but not all, environmental legal requirements for Deliverables. Supplier shall ensure Deliverables comply with the requirements provided in ES 46G3772. ES 46G3772 contains restrictions on Materials, certain chemicals used in manufacturing and includes other requirements, e.g., battery collection programs, labeling of batteries, energy efficiency, and marking of plastic Parts. If the Deliverable does not contain certain types of parts, then the section of 46G3772 referring to those parts would not apply, e.g., if there are no batteries in the Deliverable, then the battery requirements would not apply. ES 46G3772 requires Suppliers to disclose information about the content of certain substances in their Deliverables. This specification also applies to chemical Deliverables used for Field Use Materials, Chemical Product Supplies and chemicals contained in hardware Deliverables, Parts, or Products.
Compliance with the requirements in ES 46G3772 alone may not satisfy the Supplier's responsibilities to IBM because ES 46G3772 does not encompass all environmental legal requirements for Deliverables worldwide. In addition to ES 46G3772, Supplier shall ensure the Deliverables comply with all "Environmental Laws" and are ready for import, export, sale, or other distribution of the Deliverable in all jurisdictions worldwide, regardless of where they are sold to IBM. "Environmental Laws" include laws, rules and regulations at local, state, provincial, national, or international level that relate to environmental matters, including without limitation, material restrictions, material bans, labeling, availability of product environmental information, energy efficiency, end-of-life take back, battery requirements, and other similar requirements.
It is important to note that in addition to ES 46G3772; IBM maintains environmental and / or related requirements in other specifications, contracts, or procurement documents. Most notably, full compliance requirements for the European Union (EU) Directive 2011/65/EU on the Restriction on the use of Certain Hazardous Substances in Electrical and Electronic Equipment (RoHS) are not solely a part of ES 46G3772 but are rather applied through the combination of ES 46G3772, other applicable contract provisions, and IBM engineering specifications, such as 53P6233, 97P3864, and/ or 873444. In circumstances where multiple documents contain restrictions on the same chemical or substance in the same application, the most restrictive requirements apply.
1.2 Definitions
Additional definitions can be found in the applicable sections and/or regulations.
Agglomerate - a collection of weakly bound particles or aggregates where the resulting external surface area is similar to the sum of the surface areas of the individual components. [Source: EU Commission Recommendation 2011/696/EU on the definition of nanomaterial]
Aggregate - a particle comprising of strongly bound or fused particles. [Source: EU Commission Recommendation 2011/696/EU on the definition of nanomaterial]
Article - an object which during production is given a special shape, surface, or design which determines its function to a greater degree than does its chemical composition. [Source: EU Regulation 1907/2006 concerning the Registration, Evaluation, Authorization, and Restriction of Chemicals (REACH)]. In reference to EU REACH Substances of Very High Concern (SVHC), when a product is made up of more than one constituent Article, the SVHC concentration above 0.1% weight by weight applies to each constituent Article making up the product.
PN 46G3772 Page 4 of 197 EC J85151 13MAY05
EC 899569 04NOV93 EC G32590 08FEB06
EC 899773 07DEC94 EC L04925B 11JAN07
EC F15040 25AUG97 EC L04925M 01AUG07
EC F73298 02SEP99 EC L04925N 19FEB08
EC F74336 05SEP00 EC L05962X 08AUG08
EC F72950 23JAN02 EC L79598 25FEB09
EC H64064 13MAY03 EC N24534E 02OCT09
EC H17205 29JUL03 EC L79598A 22FEB10
EC L79598B 22SEPT10
EC L79598C 27APR2011
EC L79598D 6SEPT2011
EC N31517Y 26MAR2012
ECN31946T 19APR2013
ECN33076 5DEC2013
ECN33076A 16MAY2014
ECN46883 17OCT2014
ECP02692 26MAY2015
ECO P02838 15OCT2015
ECOP17505 21APR2016
ECO P17633 1OCT2016
ECOP17764 20MAR2017
ECOP17905 16OCT2017
ECOP17958 Jan 25, 2018
ECOP44540 June 11, 2018
ECOP44680 Mar 5, 2019
ECOP44794 Aug 9, 2019
ECO P44877 15Feb2020
ECO P45188 1Sept2020
ECO P45272 9Mar2021
ECO P45379 18Oct2021
ECO 45443 4April2022
ECO P45475 14Nov2022
This document is the property of IBM. Its use is authorized only for responding to a request for quotation or for the performance of work for IBM. All questions must be referred to the IBM Procurement Department requesting the quotation or performance of work.
Engineering Specification
Page 5 of 197
[Source: The Court of Justice of the European Union Judgement Case C-106/14 on September 10, 2015 for EU Regulation 1907/2006 (REACH) Articles 7(2) and 33, 10 September 2015]
Battery or accumulator- any source of electrical energy generated by direct conversion of chemical energy and consisting of one or more primary battery cells (nonrechargeable) or consisting of one or more secondary battery cells (rechargeable). [Source: EU Directive 2006/66/EC on batteries and accumulators and waste batteries and accumulators]
Chemical - a substance, whether by itself or in a mixture, or a mixture, whether manufactured or obtained from nature, but does not include living organisms, which belongs to either of the following categories: (a) Pesticides, including severely hazardous pesticide formulations; (b) Industrial chemicals. [Source: EU Regulation 649/2012 of the European Parliament and of the Council of 4 July 2012 concerning the export and import of hazardous chemicals]
Chemical Product Supply - a chemical used as part of the operation of a hardware product which is consumed during the operation of the product and/or which must be periodically replaced to maintain the product.
Covered Electronic Device video display device containing a screen greater than 4 inches, measured diagonally, such as computer monitors containing cathode ray tubes, laptop computers with a liquid crystal display, liquid crystal display containing monitors. [Source: California Electronic Waste Recycling Act, SB 20, 2003, and SB 50, 2004]
Deliverable(s) - any tangible item(s) delivered by or for a Supplier to IBM in accordance with a purchase contract or other agreement with IBM. Deliverables include, but are not limited to, components, Materials, Parts, Products, and tools.
Electrical and Electronic Equipment (EEE) - means equipment which is dependent on electric currents or electromagnetic fields in order to work properly and equipment for the generation, transfer and measurement of such currents and fields and designed for use with a voltage rating not exceeding 1000 volts for alternating current and 1500 volts for direct current. [Source: EU Directive 2012/19/EU of the European Parliament and of the Council of 4 July 2012 on waste electrical and electronic equipment (WEEE) and EU Directive 2011/65/EU on the Restriction of the use of certain Hazardous Substances in electrical and electronic equipment (RoHS)]
Electronic Display means a display screen and associated electronics that, as its primary function, displays visual information from wired or wireless sources. [Source: EU Regulation 2019/2021 of 1 October 2019 laying down ecodesign requirements for electronic displays pursuant to Directive 2009/125/EC of the European Parliament and of the Council]
European Union (EU) A list of the European Union Member States can be found at https://europa.eu/europeanunion/about-eu/countries_en.
European Free Trade Association (EFTA) Member States are Iceland, Liechtenstein, Norway and Switzerland http://www.efta.int/about-efta.
Field Use Material (FUM) - a chemical used to maintain and/or service hardware products.
Frequently Handled Cables - cables and cords which are readily accessible to the consumer during ordinary use,
e.g., computer mouse cords, computer peripheral wires and cables designed to plug into the front of system (e.g.,
USB cords), computer peripheral AC adapter cord and I/F cable for portable computers or portable peripheral
devices, computer peripheral PCMCIA card cord for portable computers, computer peripheral wires and cables for
portable computers, computer speaker cords used with portable computers, desktop computer power/patch/pin cords
designed to plug into the front of a computer, external CD/DVD and tape drives for portable computers, mobile PC
computer cords, computer joystick, audio or video adapter cords for portable products, audio or video cable for
portable products, audio/video/computer/telecommunications cables, packaged individually for retail sales, portable
PN 46G3772 Page 5 of 197 EC J85151 13MAY05
EC 899569 04NOV93 EC G32590 08FEB06
EC 899773 07DEC94 EC L04925B 11JAN07
EC F15040 25AUG97 EC L04925M 01AUG07
EC F73298 02SEP99 EC L04925N 19FEB08
EC F74336 05SEP00 EC L05962X 08AUG08
EC F72950 23JAN02 EC L79598 25FEB09
EC H64064 13MAY03 EC N24534E 02OCT09
EC H17205 29JUL03 EC L79598A 22FEB10
EC L79598B 22SEPT10
EC L79598C 27APR2011
EC L79598D 6SEPT2011
EC N31517Y 26MAR2012
ECN31946T 19APR2013
ECN33076 5DEC2013
ECN33076A 16MAY2014
ECN46883 17OCT2014
ECP02692 26MAY2015
ECO P02838 15OCT2015
ECOP17505 21APR2016
ECO P17633 1OCT2016
ECOP17764 20MAR2017
ECOP17905 16OCT2017
ECOP17958 Jan 25, 2018
ECOP44540 June 11, 2018
ECOP44680 Mar 5, 2019
ECOP44794 Aug 9, 2019
ECO P44877 15Feb2020
ECO P45188 1Sept2020
ECO P45272 9Mar2021
ECO P45379 18Oct2021
ECO 45443 4April2022
ECO P45475 14Nov2022
This document is the property of IBM. Its use is authorized only for responding to a request for quotation or for the performance of work for IBM. All questions must be referred to the IBM Procurement Department requesting the quotation or performance of work.
Engineering Specification
Page 6 of 197
digital imaging equipment, portable DVD player, portable power adapters, AC adapters for foreign outlets and other voltage converters, portable ZIP drives, scanners for portable computers, USB and firewire cords.
Homogeneous Material means one material of uniform composition throughout or a material, consisting of a combination of materials that cannot be disjointed or separated into different materials by mechanical actions such as unscrewing, cutting, crushing, grinding and abrasive processes. [Source: EU Directive 2011/65/EU of the European Parliament and of the Council of 8 June 2011 on the restriction of the use of certain hazardous substances in electrical and electronic equipment].
Industrial monitoring and control instruments - means monitoring and control instruments designed for exclusively industrial or professional use [Source: EU Directive 2011/65/EU of the European Parliament and of the Council of 8 June 2011 on the restriction of the use of certain hazardous substances in electrical and electronic equipment]; Examples of Monitoring and Control Instruments include: Smoke detector, Heating regulators, Thermostats, Measuring, weighing or adjusting for household or as laboratory equipment, Other monitoring and control instruments used in industrial installations (e.g. in control panels). [Source: EU Directive 2012/19/EU of the European Parliament and of the Council of 4 July 2012 on Waste Electrical and Electronic Equipment (WEEE)].
Intentionally Added or Intentional Addition - a substance is deliberately utilized in the production of a Deliverable.
In vitro diagnostic medical device - means any medical device which is a reagent, reagent product, calibrator, control material, kit, instrument, apparatus, piece of equipment, software or system, whether used alone or in combination, intended by the manufacturer to be used in vitro for the examination of specimens, including blood and tissue donations, derived from the human body, solely or principally for the purpose of providing information on one or more of the following: (a) concerning a physiological or pathological process or state; (b) concerning congenital physical or mental impairments; (c) concerning the predisposition to a medical condition or a disease; (d) to determine the safety and compatibility with potential recipients; (e) to predict treatment response or reactions; (f) to define or monitoring therapeutic measures. Specimen receptacles shall also be deemed to be in vitro diagnostic medical devices. [Source: EU Regulation 2017/746 of the European Parliament and of the Council of 5 April 2017 on in vitro diagnostic medical devices.]
Materials - chemical substances and preparations that are supplied for the production of Parts, Products and other items (e.g., structural plastics, metals, coatings, paints, and adhesives) and chemical substances or preparations that are shipped with Parts or Products (e.g., toners, cleaners, lubricants, oils, and refrigerants).
Medical Devices Note: this definition is for RoHS and WEEE purposes only. Please see further definitions for requirements for Medical Devices. Medical Devices means a medical device within the meaning of point (a) of Article 1(2) of Directive 93/42/EEC and which is also EEE [Source: EU Directive 2011/65/EU of the European Parliament and of the Council of 8 June 2011 on the restriction of the use of certain hazardous substances in electrical and electronic equipment]; medical device - means any instrument, apparatus, appliance, material or other article, whether used alone or in combination, including the software necessary for its proper application intended by the manufacturer to be used for human beings for the purpose of: -- Diagnosis, prevention, monitoring, treatment or alleviation of disease -- Diagnosis, monitoring, treatment, alleviation of or compensation for an injury or handicap, -- Investigation, replacement or modification of the anatomy or of a physiological process, -- Control of conception, And which does not achieve its principal intended action in or on the human body by pharmacological, immunological or metabolic means, but which may be assisted in its function by such means. [Source: EU Council Directive 93/42/EEC of 14 June 1993 concerning medical devices]. Examples of Medical Devices include: Radiotherapy equipment, Cardiology equipment, Dialysis equipment, Pulmonary ventilators, Nuclear medicine equipment, Laboratory equipment for in vitro diagnosis, Analyzers, Freezers, Fertilization tests, Other appliances for detecting, preventing, monitoring, treating, alleviating illness, injury or disability [Source: EU Directive 2012/19/EU of the European Parliament and of the Council of 4 July 2012 on Waste Electrical and Electronic Equipment (WEEE)].
PN 46G3772 Page 6 of 197 EC J85151 13MAY05
EC 899569 04NOV93 EC G32590 08FEB06
EC 899773 07DEC94 EC L04925B 11JAN07
EC F15040 25AUG97 EC L04925M 01AUG07
EC F73298 02SEP99 EC L04925N 19FEB08
EC F74336 05SEP00 EC L05962X 08AUG08
EC F72950 23JAN02 EC L79598 25FEB09
EC H64064 13MAY03 EC N24534E 02OCT09
EC H17205 29JUL03 EC L79598A 22FEB10
EC L79598B 22SEPT10
EC L79598C 27APR2011
EC L79598D 6SEPT2011
EC N31517Y 26MAR2012
ECN31946T 19APR2013
ECN33076 5DEC2013
ECN33076A 16MAY2014
ECN46883 17OCT2014
ECP02692 26MAY2015
ECO P02838 15OCT2015
ECOP17505 21APR2016
ECO P17633 1OCT2016
ECOP17764 20MAR2017
ECOP17905 16OCT2017
ECOP17958 Jan 25, 2018
ECOP44540 June 11, 2018
ECOP44680 Mar 5, 2019
ECOP44794 Aug 9, 2019
ECO P44877 15Feb2020
ECO P45188 1Sept2020
ECO P45272 9Mar2021
ECO P45379 18Oct2021
ECO 45443 4April2022
ECO P45475 14Nov2022
This document is the property of IBM. Its use is authorized only for responding to a request for quotation or for the performance of work for IBM. All questions must be referred to the IBM Procurement Department requesting the quotation or performance of work.
Engineering Specification
Page 7 of 197
Medical Device means any instrument, apparatus, appliance, software, implant, reagent, material or other article intended by the manufacturer to be used, alone or in combination, for human beings for one or more of the following specific medical purposes: - diagnosis, prevention, monitoring, prediction, prognosis, treatment or alleviation of disease, - diagnosis, monitoring, treatment, alleviation of, or compensation for, an injury or disability, - investigation, replacement or modification of the anatomy or of a physiological or pathological process or state, - providing information by means of in vitro examination of specimens derived from the human body, including
organ, blood and tissue donations, and which does not achieve its principal intended action by pharmacological, immunological or metabolic means, in or on the human body, but which may be assisted in its function by such means. The following products shall also be deemed to be medical devices: - devices for the control or support of conception; - Products specifically intended for the cleaning, disinfection or sterilization of devices as referred to in Article 1(4) and of those referred to in the first paragraph of this point. [Source: EU Regulation 2017/745 of the European Parliament and of the Council of 5 April 2017 on medical devices.]
Medical Device - A medical device is any instrument, apparatus, appliance, material or other article (whether used alone or in combination, and including the software necessary for its proper application) intended, by the person under whose name it is or is to be supplied, to be used for human beings for the purpose of one or more of the following:
a. diagnosis, prevention, monitoring, treatment or alleviation of disease; b. diagnosis, monitoring, treatment, alleviation of or compensation for an injury or handicap; c. investigation, replacement or modification of the anatomy or of a physiological process; d. control of conception; and that does not achieve its principal intended action in or on the human body by pharmacological, immunological or metabolic means, but that may be assisted in its function by such means; or a. an accessory to such an instrument, apparatus, appliance, material or other article. [Source: Australia Therapeutic Goods Act 1989.]
Mixture a mixture or solution composed of two or more substances. [Source: EU Regulation No 1272/2008 on classification, labeling, and packaging of substances and mixtures]
Not Detected - below the detection limit of established test standards or appropriate industry wide test methods. In general, these test standards/ methods should achieve trace level detection or at the lowest detection capabilities of the specific sample matrix.
Particle - a minute piece of matter with defined physical boundaries. [Source: EU Commission Recommendation 2011/696/EU on the definition of nanomaterial]
Parts - fabricated Materials, components, devices, and assemblies.
Placing on the market - means making a product available for the first time on the Community market with a view to its distribution or use within the Community, whether for reward or free of charge and irrespective of the selling technique. [Source: EU Directive 2009/125/EC of the European Parliament and of the Council of 21 October 2009 establishing a framework for the setting of ecodesign requirements for energy-related products]
Postconsumer recycled material: Material generated by households or by commercial, industrial and institutional facilities, which can no longer be used for its intended purpose. This includes returns of material from the distribution chain. [Source: NSF/ANSI 426-2017 Environmental Leadership and Corporate Social Responsibility Assessment of Servers]
PN 46G3772 Page 7 of 197 EC J85151 13MAY05
EC 899569 04NOV93 EC G32590 08FEB06
EC 899773 07DEC94 EC L04925B 11JAN07
EC F15040 25AUG97 EC L04925M 01AUG07
EC F73298 02SEP99 EC L04925N 19FEB08
EC F74336 05SEP00 EC L05962X 08AUG08
EC F72950 23JAN02 EC L79598 25FEB09
EC H64064 13MAY03 EC N24534E 02OCT09
EC H17205 29JUL03 EC L79598A 22FEB10
EC L79598B 22SEPT10
EC L79598C 27APR2011
EC L79598D 6SEPT2011
EC N31517Y 26MAR2012
ECN31946T 19APR2013
ECN33076 5DEC2013
ECN33076A 16MAY2014
ECN46883 17OCT2014
ECP02692 26MAY2015
ECO P02838 15OCT2015
ECOP17505 21APR2016
ECO P17633 1OCT2016
ECOP17764 20MAR2017
ECOP17905 16OCT2017
ECOP17958 Jan 25, 2018
ECOP44540 June 11, 2018
ECOP44680 Mar 5, 2019
ECOP44794 Aug 9, 2019
ECO P44877 15Feb2020
ECO P45188 1Sept2020
ECO P45272 9Mar2021
ECO P45379 18Oct2021
ECO 45443 4April2022
ECO P45475 14Nov2022
This document is the property of IBM. Its use is authorized only for responding to a request for quotation or for the performance of work for IBM. All questions must be referred to the IBM Procurement Department requesting the quotation or performance of work.
Engineering Specification
Page 8 of 197
Preparation - a mixture or solution composed of two or more substances, for example paint, lubricant or ink. [Source: EU Regulation 1907/2006 concerning the Registration, Evaluation, Authorization and Restriction of Chemicals (REACH)]
Products - stand alone, final assemblies including complete machines supplied by an original equipment manufacturer (OEM).
Putting into service - means the first use of a product for its intended purpose by an end-user in the Community. [Source: EU Directive 2009/125/EC of the European Parliament and of the Council of 21 October 2009 establishing a framework for the setting of ecodesign requirements for energy-related products]
RoHS - an acronym for EU Directive 2011/65/EU on the Restriction of the use of certain Hazardous Substances in electrical and electronic equipment and subsequent amendments.
RoHS substances - substances regulated by EU Directive 2011/65/EU on RoHS and amendments. These substances (as of the last revision date of this specification) are mercury, lead, cadmium, hexavalent chromium, polybrominated biphenyls, polybrominated diphenyl ethers, bis (2-ethylhexyl) phthalate, butyl benzyl phthalate, dibutyl phthalate and diisobutyl phthalate.
REACH - an acronym for European Commission Regulation Number 1907/2006 concerning the Registration, Evaluation, Authorization, and Restriction of CHemicals and amendments.
Substance - a chemical element and its compounds in the natural state or obtained by any manufacturing process, including any additive necessary to preserve its stability and any impurity deriving from the process used, but excluding any solvent which may be separated without affecting the stability of the substance or changing its composition. [Source: EU Regulation 1907/2006 concerning the Registration, Evaluation, Authorization, and Restriction of CHemicals (REACH)] Substance includes such examples as ethanol and metals. Note: metals are included here not in the form of a part or product such as a heat sink or sheet metal cover but as a metal such as aluminum or aluminum alloy. Substance goes beyond a pure chemical compound defined by a single molecular structure. The definition of Substance includes different constituents such as impurities.
Substance(s) of Very High Concern (SVHC) 1. Substances meeting the criteria for classification in accordance with EU Directive 67/548/EEC:
Carcinogenic category 1 or 2 Mutagenic category 1 or 2 Toxic for reproduction category 1 or 2;
2. Substances which are persistent, bioaccumulative and toxic (PBT) or very persistent and very bioaccumulative (vPvB) in accordance with the criteria set out in Annex XIII of the EU REACH Regulation;
3. Substances- such as those having endocrine disrupting properties or those having PBT properties or vPvB properties which do not fulfill the criteria of 2 above - for which there is scientific evidence of probable serious effects to human health or the environment which give rise to an equivalent level of concern to those of other Substances listed in 1 or 2 and which are identified on a case-by-case basis in accordance with the procedure set out in Article 59 of REACH. [Source: EU REACH Regulation, Article 57]
Unintentional trace contamination - The level for unintentional trace contamination corresponds to a level below which the substance cannot be meaningfully used but above the detection limit of existing detection methods, and which has been reduced to the lowest possible technically and economically feasible level. The substance is not intentionally introduced into the manufacturing process. The level of the unintentional trace contamination must have no potential to be hazardous to human health and does not impair the life or growth of flora or fauna through environmental pollution. [Reference: UN Information unintentional trace contaminants and low POPs content for waste. July 2012]
WEEE - an acronym for European Union (EU) Directive 2012/19/EU of the European Parliament and of the Council of 4 July 2012 on Waste Electrical and Electronic Equipment (WEEE).
PN 46G3772 Page 8 of 197 EC J85151 13MAY05
EC 899569 04NOV93 EC G32590 08FEB06
EC 899773 07DEC94 EC L04925B 11JAN07
EC F15040 25AUG97 EC L04925M 01AUG07
EC F73298 02SEP99 EC L04925N 19FEB08
EC F74336 05SEP00 EC L05962X 08AUG08
EC F72950 23JAN02 EC L79598 25FEB09
EC H64064 13MAY03 EC N24534E 02OCT09
EC H17205 29JUL03 EC L79598A 22FEB10
EC L79598B 22SEPT10
EC L79598C 27APR2011
EC L79598D 6SEPT2011
EC N31517Y 26MAR2012
ECN31946T 19APR2013
ECN33076 5DEC2013
ECN33076A 16MAY2014
ECN46883 17OCT2014
ECP02692 26MAY2015
ECO P02838 15OCT2015
ECOP17505 21APR2016
ECO P17633 1OCT2016
ECOP17764 20MAR2017
ECOP17905 16OCT2017
ECOP17958 Jan 25, 2018
ECOP44540 June 11, 2018
ECOP44680 Mar 5, 2019
ECOP44794 Aug 9, 2019
ECO P44877 15Feb2020
ECO P45188 1Sept2020
ECO P45272 9Mar2021
ECO P45379 18Oct2021
ECO 45443 4April2022
ECO P45475 14Nov2022
This document is the property of IBM. Its use is authorized only for responding to a request for quotation or for the performance of work for IBM. All questions must be referred to the IBM Procurement Department requesting the quotation or performance of work.
Engineering Specification
Page 9 of 197
1.3 Application
ES 46G3772 applies to all Deliverables supplied to IBM that reference this specification in a Statement of Work, print, contract, or other IBM document.
Suppliers are responsible for compliance with ES 46G3772 in their own operations, in their subcontracted operations, and in the Materials they procure for the manufacture of Deliverables for IBM as described herein.
In the event of conflict between ES 46G3772 and any IBM part drawing requirement, Suppliers shall immediately notify their IBM procurement representative. Any deviation from the requirements of ES 46G3772 must have prior written approval by IBM's procurement representative. IBM Procurement shall obtain consent from the appropriate IBM representatives. IBM Procurement must contact the author of this document for details on the requirements for deviations.
1.4 Document Administration
This document is maintained and controlled by IBM Systems.
1.5 IBM Documents
ES 46G3772 and the following documents referenced herein can be accessed from the environmental requirements
section of this website: https://www.ibm.com/procurement/ossi
Product Content Declaration for IBM Suppliers, IBM Part Number 46C3484. Engineering Specification 53P6233 Compliance Requirements for the European Union Directive (and other
jurisdictions) on the Restriction of the Use of Certain Hazardous Substances (RoHS) in Electrical and Electronic Equipment for IBM Products. This specification reference here is informational only. The IBM print, Statement of Work or other procurement documentation must reference this specification as applicable to the specific Deliverable.
Engineering Specification 97P3864 Compliance Requirements for the European Union Directive (and other
jurisdictions) on the Restriction of the Use of Certain Hazardous Substances (RoHS) in Electrical and Electronic Equipment for IBM Products. This specification does not allow for use of the EU RoHS exemption for "Lead in solders for servers, storage and storage array systems." This specification reference here is informational only. The IBM print, Statement of Work or other procurement documentation must reference this specification as applicable to the specific Deliverable.
873444 Product Quality Addendum (PQA) for Purchased Electronic Components. This specification reference
here is for informational purposes only. The IBM print, Statement of Work or other procurement documentation must reference this specification as applicable to the specific Deliverable.
Engineering Specification 92F6933 Packaging Requirements for Dangerous Goods. Engineering Specification 5897660 Packaging Materials, Essential Requirements.
PN 46G3772 Page 9 of 197 EC J85151 13MAY05
EC 899569 04NOV93 EC G32590 08FEB06
EC 899773 07DEC94 EC L04925B 11JAN07
EC F15040 25AUG97 EC L04925M 01AUG07
EC F73298 02SEP99 EC L04925N 19FEB08
EC F74336 05SEP00 EC L05962X 08AUG08
EC F72950 23JAN02 EC L79598 25FEB09
EC H64064 13MAY03 EC N24534E 02OCT09
EC H17205 29JUL03 EC L79598A 22FEB10
EC L79598B 22SEPT10
EC L79598C 27APR2011
EC L79598D 6SEPT2011
EC N31517Y 26MAR2012
ECN31946T 19APR2013
ECN33076 5DEC2013
ECN33076A 16MAY2014
ECN46883 17OCT2014
ECP02692 26MAY2015
ECO P02838 15OCT2015
ECOP17505 21APR2016
ECO P17633 1OCT2016
ECOP17764 20MAR2017
ECOP17905 16OCT2017
ECOP17958 Jan 25, 2018
ECOP44540 June 11, 2018
ECOP44680 Mar 5, 2019
ECOP44794 Aug 9, 2019
ECO P44877 15Feb2020
ECO P45188 1Sept2020
ECO P45272 9Mar2021
ECO P45379 18Oct2021
ECO 45443 4April2022
ECO P45475 14Nov2022
This document is the property of IBM. Its use is authorized only for responding to a request for quotation or for the performance of work for IBM. All questions must be referred to the IBM Procurement Department requesting the quotation or performance of work.
Engineering Specification
Page 10 of 197
2 Requirements
2.1 Prohibited From Use
2.1.1 Restrictions for Hardware Deliverables, Parts, Products, Chemicals, Substances, and Preparations
Table 1 lists restrictions for categories of substances which must not be contained in Deliverables, Parts, Products, Chemicals, Substances, and Preparations. The scope of restrictions varies by substance category. Details of the restrictions for each category are provided in Table 1 along with some applicable regulatory references. Please note the regulatory references are only examples and are not intended to impact or alter the IBM restrictions set forth in this specification. Expanded listings of relevant substances in each of the categories are available in the Annexes referenced in Table 1. If a substance is found in several entries (Tables 1, 2, 3, 4, 5, and/or the Annexes) due to multiple laws and chemical classifications, verify the stated requirements for the application of concern and use the more restrictive level.
Please note certain substances subject to EU RoHS Directive 2011/65/EU are already restricted by other regulations at concentration levels that are more stringent than those associated with EU RoHS compliance. Table 1 presents the requirements for these substances as defined by certain existing legislation and/or IBM requirements.
Compliance of Deliverables to all the criteria of the EU Directive on RoHS is not solely governed by ES 46G3772. Only those restrictions on RoHS substances which must be met in ES 46G3772 are listed in Table 1. Other IBM specifications are used to apply EU RoHS compliance requirements to Deliverables. See print notes, Part specifications, purchase contracts, purchase orders, or contact your IBM procurement representative to determine if IBM's RoHS specifications apply in addition to ES 46G3772.
In addition to the prohibited substances in Table 1, IBM prohibits the use of the following substances in system enclosures:
Polyvinyl chloride (CAS 9002-86-2). Prohibited by IBM for use in system enclosures for IBM designed and
OEM Products. System enclosures include cover sets enclosing an entire product, including enclosures for monitors, servers, workstations, storage systems, and kiosks. This does not include mice, keyboards, cables, or bezels for subcomponents. Bezels for Storage products (e.g., Tape libraries, tape and CD/DVD drives) must meet this requirement and not use PVC. This prohibition includes blends of resins which include PVC in whole or part of the composition.
Monomer tetrabromobisphenol-A (TBBA) (CAS 79-94-7). Prohibited by IBM for use as an additive flame
retardant in system enclosures for IBM designed and OEM system enclosures. System enclosures include housing parts enclosing an entire product such as monitors, servers, workstations, storage systems and kiosks. This does not include mice, keyboards, and bezels for subcomponents such as tape and DVD drives. The nonreactive form only is prohibited. (Note: TBBA used in polycarbonate resin is generally in a reactive form, not additive.)
Notes for Table 1 A list of representative regulatory references is included after Table 1. This list is not all-inclusive; it is provided for example purposes only. Where the reference of "IBM Requirement" is made, this means the requirement in that line is required by IBM and may or may not be also required by a regulation or law. The referenced Annexes include lists of example compounds and Chemical Abstracts Service (CAS) numbers. The Annexes are not all inclusive unless stated. For more details about the restrictions listed below, e.g., exemptions and definitions, please refer to the cited regulatory reference.
PN 46G3772 Page 10 of 197 EC J85151 13MAY05
EC 899569 04NOV93 EC G32590 08FEB06
EC 899773 07DEC94 EC L04925B 11JAN07
EC F15040 25AUG97 EC L04925M 01AUG07
EC F73298 02SEP99 EC L04925N 19FEB08
EC F74336 05SEP00 EC L05962X 08AUG08
EC F72950 23JAN02 EC L79598 25FEB09
EC H64064 13MAY03 EC N24534E 02OCT09
EC H17205 29JUL03 EC L79598A 22FEB10
EC L79598B 22SEPT10
EC L79598C 27APR2011
EC L79598D 6SEPT2011
EC N31517Y 26MAR2012
ECN31946T 19APR2013
ECN33076 5DEC2013
ECN33076A 16MAY2014
ECN46883 17OCT2014
ECP02692 26MAY2015
ECO P02838 15OCT2015
ECOP17505 21APR2016
ECO P17633 1OCT2016
ECOP17764 20MAR2017
ECOP17905 16OCT2017
ECOP17958 Jan 25, 2018
ECOP44540 June 11, 2018
ECOP44680 Mar 5, 2019
ECOP44794 Aug 9, 2019
ECO P44877 15Feb2020
ECO P45188 1Sept2020
ECO P45272 9Mar2021
ECO P45379 18Oct2021
ECO 45443 4April2022
ECO P45475 14Nov2022
This document is the property of IBM. Its use is authorized only for responding to a request for quotation or for the performance of work for IBM. All questions must be referred to the IBM Procurement Department requesting the quotation or performance of work.
Engineering Specification
Page 11 of 197
Table 1. Prohibited from Use in Hardware Deliverables, Parts, Products, Chemicals, Mixtures, Substances, and
Preparations
Chemical Substance Category
Details of Restriction
Sample
Regulatory
References
Acrylamide (CAS 79-06-1)
Shall not be used as a Substance or constituent of Mixtures in a
1, 2, 73
concentration equal to or greater than 0.1% by weight for grouting
applications.
Arsenic and compounds (Annex Prohibited in wood products and paints. Applications other than for 1, 2, 73
U)
wood or paint are reportable on the PCD; see Table 4 for reporting
details for other applications.
Arsenic compounds listed in REACH Annex XVII Appendices 1 6 1, 73
(as Carcinogen, Mutagen or Reproductive toxicant) are prohibited in
clothing or related accessories, and textiles which under normal or
reasonably foreseeable conditions of use come into contact with
human skin - concentration limit of 1 mg/kg Arsenic metal that can
be extracted. Disposable textiles, not for clothing, are exempt.
Asbestos (Annex A)
Prohibited.
1, 2, 3, 12, 26, 65,
66, 73, IBM
Requirement
Azo colorants (Annex B)
Azodyes which may release one or more aromatic amines (listed in 1, 2, 73
Annex B (1)) are prohibited in detectable concentrations, e.g., above
30 mg/kg (ppm) in textile and leather articles which may come into
direct and prolonged contact with human skin. (Please note Benzidine
has further restrictions, see entry in this Table for Benzidine.)
Azodyes (listed in Annex B (2)) are prohibited in concentrations
above 0.1% by weight in colorants for textile and leather articles
(e.g., fabrics for headphones and wrist straps).
Benz[a]anthracene (CAS 56- Prohibited in clothing or related accessories, and textiles which under 1, 73
55-3)
normal or reasonably foreseeable conditions of use come into contact
with human skin - concentration limit of 1 mg/kg. Disposable textiles,
not for clothing, are exempt.
Benz[e]acephenanthrylene
Prohibited in clothing or related accessories, and textiles which under 1, 73
(CAS 205-99-2)
normal or reasonably foreseeable conditions of use come into contact
with human skin - concentration limit of 1 mg/kg. Disposable textiles,
not for clothing, are exempt
Benzenenamine, 4,4'-(4-
Prohibited in clothing or related accessories, and textiles which under 1, 73
iminocyclohexa-2,5-
normal or reasonably foreseeable conditions of use come into contact
dienylidenemethylene) dianiline with human skin - concentration limit of 50 mg/kg. Disposable
hydrochloride; C.I. Basic
textiles, not for clothing, are exempt.
Red 9 (CAS 569-61-9)
Benzene (CAS 71-43-2)
Prohibited in clothing or related accessories, and textiles which under 1, 73
normal or reasonably foreseeable conditions of use come into contact
with human skin - concentration limit of 5 mg/kg. Disposable textiles,
not for clothing, are exempt.
1,2-benzenedicarboxylic acid; Prohibited in clothing or related accessories, and textiles which under 1, 73
di-C 6-8 -branched alkylesters, normal or reasonably foreseeable conditions of use come into contact
C 7-rich (CAS 71888-89-6)
with human skin - concentration limit of 1000 mg/kg (individually or
in combination with other phthalates regulated in REACH Annex
XVII.) Disposable textiles, not for clothing, are exempt.
Benzidine (CAS 92-87-5), and Prohibited. (Note benzidine is also listed in Annex B. The more
1, 2, 12, 15, 43,
compounds (Annex QQ)
restrictive level applies, which is this entry.)
73
Benzo[a]pyrene; benzo[def]
Prohibited in wood-based materials in excess of 0.5 milligrams per 2
chrysene (CAS 50-32-8)
kilogram of dry matter.
Prohibited in clothing or related accessories, and textiles which under 1, 73
normal or reasonably foreseeable conditions of use come into contact
with human skin - concentration limit of 1 mg/kg. Disposable textiles,
not for clothing, are exempt
PN 46G3772 Page 11 of 197 EC J85151 13MAY05
EC 899569 04NOV93 EC G32590 08FEB06
EC 899773 07DEC94 EC L04925B 11JAN07
EC F15040 25AUG97 EC L04925M 01AUG07
EC F73298 02SEP99 EC L04925N 19FEB08
EC F74336 05SEP00 EC L05962X 08AUG08
EC F72950 23JAN02 EC L79598 25FEB09
EC H64064 13MAY03 EC N24534E 02OCT09
EC H17205 29JUL03 EC L79598A 22FEB10
EC L79598B 22SEPT10
EC L79598C 27APR2011
EC L79598D 6SEPT2011
EC N31517Y 26MAR2012
ECN31946T 19APR2013
ECN33076 5DEC2013
ECN33076A 16MAY2014
ECN46883 17OCT2014
ECP02692 26MAY2015
ECO P02838 15OCT2015
ECOP17505 21APR2016
ECO P17633 1OCT2016
ECOP17764 20MAR2017
ECOP17905 16OCT2017
ECOP17958 Jan 25, 2018
ECOP44540 June 11, 2018
ECOP44680 Mar 5, 2019
ECOP44794 Aug 9, 2019
ECO P44877 15Feb2020
ECO P45188 1Sept2020
ECO P45272 9Mar2021
ECO P45379 18Oct2021
ECO 45443 4April2022
ECO P45475 14Nov2022
This document is the property of IBM. Its use is authorized only for responding to a request for quotation or for the performance of work for IBM. All questions must be referred to the IBM Procurement Department requesting the quotation or performance of work.
Engineering Specification
Page 12 of 197
Table 1. Prohibited from Use in Hardware Deliverables, Parts, Products, Chemicals, Mixtures, Substances, and
Preparations
Chemical Substance Category
Details of Restriction
Sample
Regulatory
References
Benzo[e]pyrene (CAS 192-97- Prohibited in clothing or related accessories, and textiles which under 1, 73
2)
normal or reasonably foreseeable conditions of use come into contact
with human skin - concentration limit of 1 mg/kg. Disposable textiles,
not for clothing, are exempt.
Benzo[j]fluoranthene (CAS 205-82-3)
Prohibited in clothing or related accessories, and textiles which under normal or reasonably foreseeable conditions of use come into contact with human skin - concentration limit of 1 mg/kg. Disposable textiles, not for clothing, are exempt.
1, 73
Benzo[k]fluoranthene (CAS 207-08-9)
Benzyl butyl phthalate (or Butyl benzyl phthalate) (BBP) (CAS 85-68-7)
Biocidal product as defined in EU Regulation 528/2012 concerning the making available on the market and use of biocidal products
[4-[4,4'-bis(dimethylamino) benzhydrylidene] cyclohexa2,5-dien-1-ylidene] dimethyl ammonium chloride; C.I. Basic Violet 3 with > 0.1% Michler's ketone (CAS 548-62-9) Bis (2-ethylhexyl) phthalate (DEHP) (CAS 117-81-7)
Bis(2-methoxyethyl) phthalate (CAS 117-82-8)
Bisphenol A (BPA) (CAS 8005-7)
2-(2-butoxyethoxy)ethanol (DEGBE) (CAS 112-34-5)
Prohibited in clothing or related accessories, and textiles which under normal or reasonably foreseeable conditions of use come into contact with human skin - concentration limit of 1 mg/kg. Disposable textiles, not for clothing, are exempt.
Prohibited at or above 0.1% by weight (or 1000ppm) in homogeneous materials. The restriction of DEHP, BBP, DBP and DIBP shall apply to medical devices, including in vitro medical devices, and monitoring and control instruments, including industrial monitoring and control instruments, from 22 July 2021. For all other equipment the restriction is in effect. Prohibited on or in Deliverables, for example, prohibited for use as a treatment on Deliverables where the biocidal product is expected to remain on the IBM Deliverable. This restriction shall not apply to treated articles where the sole treatment undertaken was the fumigation or disinfection of premises or containers used for storage or transport and where no residues are expected to remain from such treatment on the IBM Deliverable. Prohibited in clothing or related accessories, and textiles which under normal or reasonably foreseeable conditions of use come into contact with human skin - concentration limit of 50 mg/kg. Disposable textiles, not for clothing, are exempt.
Prohibited at or above 0.1% by weight (or 1000ppm) in homogeneous materials. The restriction of DEHP, BBP, DBP and DIBP shall apply to medical devices, including in vitro medical devices, and monitoring and control instruments, including industrial monitoring and control instruments, from 22 July 2021. For all other equipment the restriction is in effect. Prohibited in clothing or related accessories, and textiles which under normal or reasonably foreseeable conditions of use come into contact with human skin - concentration limit of 1000 mg/kg (individually or in combination with other phthalates regulated in REACH Annex XVII.) Disposable textiles, not for clothing, are exempt. Prohibited in Frequently Handled Cables and frequently handled parts and products, e.g., mice, mouse pads, and keyboards. This prohibition applies to dermal exposure levels at or above 3 micrograms/day. Prohibited in thermal receipt paper and cash register receipt paper. Prohibited in thermal receipt paper in a concentration equal to or greater than 0.02% by weight. Prohibited in spray paints, paints intended to be sprayed or in spray cleaners in concentrations equal to or greater than 3% by weight.
1, 73 44, 61
41
1, 73
44, 61
1, 73 14 55 1, 73 1, 2, 73
PN 46G3772 Page 12 of 197 EC J85151 13MAY05
EC 899569 04NOV93 EC G32590 08FEB06
EC 899773 07DEC94 EC L04925B 11JAN07
EC F15040 25AUG97 EC L04925M 01AUG07
EC F73298 02SEP99 EC L04925N 19FEB08
EC F74336 05SEP00 EC L05962X 08AUG08
EC F72950 23JAN02 EC L79598 25FEB09
EC H64064 13MAY03 EC N24534E 02OCT09
EC H17205 29JUL03 EC L79598A 22FEB10
EC L79598B 22SEPT10
EC L79598C 27APR2011
EC L79598D 6SEPT2011
EC N31517Y 26MAR2012
ECN31946T 19APR2013
ECN33076 5DEC2013
ECN33076A 16MAY2014
ECN46883 17OCT2014
ECP02692 26MAY2015
ECO P02838 15OCT2015
ECOP17505 21APR2016
ECO P17633 1OCT2016
ECOP17764 20MAR2017
ECOP17905 16OCT2017
ECOP17958 Jan 25, 2018
ECOP44540 June 11, 2018
ECOP44680 Mar 5, 2019
ECOP44794 Aug 9, 2019
ECO P44877 15Feb2020
ECO P45188 1Sept2020
ECO P45272 9Mar2021
ECO P45379 18Oct2021
ECO 45443 4April2022
ECO P45475 14Nov2022
This document is the property of IBM. Its use is authorized only for responding to a request for quotation or for the performance of work for IBM. All questions must be referred to the IBM Procurement Department requesting the quotation or performance of work.
Engineering Specification
Page 13 of 197
Table 1. Prohibited from Use in Hardware Deliverables, Parts, Products, Chemicals, Mixtures, Substances, and
Preparations
Chemical Substance Category
Details of Restriction
Sample
Regulatory
References
Cadmium/Cadmium
Cadmium is prohibited in concentrations above 100 ppm or 0.01% by 1, 2, 12, 28, 73
Compounds (Annex C) *
weight when used in a paint, varnish, color pigment, dye, stabilizer,
plastic, resins, or in epoxy resins applications or Articles treated with
such paints and varnishes. Shall not be used in brazing fillers in
concentrations equal to or greater than 0.01% by weight. All
cadmium uses in plating or in a surface coating containing cadmium
is prohibited. Prohibited in zinc plated Articles at or above 0.025% by
mass.
Articles shall not be painted if the concentration of cadmium
1, 73
(expressed as cadmium metal) is equal to or greater than 0.1% by
weight of the paint on the painted article.
Cadmium and compounds listed in REACH Annex XVII Appendices 1, 73
1 6 (as Carcinogen, Mutagen or Reproductive toxicant) are
prohibited in clothing or related accessories, and textiles which under
normal or reasonably foreseeable conditions of use come into contact
with human skin - concentration limit of 1 mg/kg Cadmium metal
that can be extracted. Disposable textiles, not for clothing, are
exempt.
For restrictions in battery applications, see Table 8.
Cadmium is prohibited in wood-based materials in excess of 2
milligrams per kilogram of dry matter.
Prohibited in Chemicals, Substances and Preparations
40
Carcinogenic, mutagenic or
In Vitro Medical Devices must be designed and manufactured to
59, 60, 62
toxic to reproduction (CMR) in reduce the risks posed by these substances to a level as low as
accordance with Part 3 of
reasonably practicable, including wear debris, degradation products
Annex VI to EU Regulation
and processing residues.
1272/2008 Classification,
Medical Devices must be designed and manufactured to reduce the
Labeling and Packaging
risks posed by these substances to a level as low as reasonably
practicable, including wear debris, degradation products and
processing residues. Substances must be below 0.1% weight by
weight.
4-chloro-o-toluidinium chloride Prohibited in clothing or related accessories, and textiles which under 1, 73
(CAS 3165-93-3)
normal or reasonably foreseeable conditions of use come into contact
with human skin - concentration limit of 30 mg/kg. Disposable
textiles, not for clothing, are exempt.
a -chlorotoluene; benzyl
Prohibited in clothing or related accessories, and textiles which under 1, 73
chloride (CAS 100-44-7)
normal or reasonably foreseeable conditions of use come into contact
with human skin - concentration limit of 1 mg/kg. Disposable textiles,
not for clothing, are exempt.
Chrysene (CAS 218-01-9)
Prohibited in clothing or related accessories, and textiles which under 1, 73
normal or reasonably foreseeable conditions of use come into contact
with human skin - concentration limit of 1 mg/kg. Disposable textiles,
not for clothing, are exempt.
Creosote, coal tar, tar oils, and Prohibited for the treatment of wood.
1, 2, 73
anthracene substances (Annex
FF)
Decabromo diphenyl ether,
Prohibited.
10, 19, 23, 31
another name -
1, 22, 33, 61, 80,
Bis(pentabromophenyl)ether
IBM
(CAS 1163-19-5) *
Requirement
PN 46G3772 Page 13 of 197 EC J85151 13MAY05
EC 899569 04NOV93 EC G32590 08FEB06
EC 899773 07DEC94 EC L04925B 11JAN07
EC F15040 25AUG97 EC L04925M 01AUG07
EC F73298 02SEP99 EC L04925N 19FEB08
EC F74336 05SEP00 EC L05962X 08AUG08
EC F72950 23JAN02 EC L79598 25FEB09
EC H64064 13MAY03 EC N24534E 02OCT09
EC H17205 29JUL03 EC L79598A 22FEB10
EC L79598B 22SEPT10
EC L79598C 27APR2011
EC L79598D 6SEPT2011
EC N31517Y 26MAR2012
ECN31946T 19APR2013
ECN33076 5DEC2013
ECN33076A 16MAY2014
ECN46883 17OCT2014
ECP02692 26MAY2015
ECO P02838 15OCT2015
ECOP17505 21APR2016
ECO P17633 1OCT2016
ECOP17764 20MAR2017
ECOP17905 16OCT2017
ECOP17958 Jan 25, 2018
ECOP44540 June 11, 2018
ECOP44680 Mar 5, 2019
ECOP44794 Aug 9, 2019
ECO P44877 15Feb2020
ECO P45188 1Sept2020
ECO P45272 9Mar2021
ECO P45379 18Oct2021
ECO 45443 4April2022
ECO P45475 14Nov2022
This document is the property of IBM. Its use is authorized only for responding to a request for quotation or for the performance of work for IBM. All questions must be referred to the IBM Procurement Department requesting the quotation or performance of work.
Engineering Specification
Page 14 of 197
Table 1. Prohibited from Use in Hardware Deliverables, Parts, Products, Chemicals, Mixtures, Substances, and
Preparations
Chemical Substance Category
Details of Restriction
Sample
Regulatory
References
Dibenz [a,h]anthracene (CAS Prohibited in clothing or related accessories, and textiles which under 1, 73
53-70-3)
normal or reasonably foreseeable conditions of use come into contact
with human skin - concentration limit of 1 mg/kg. Disposable textiles,
not for clothing, are exempt.
Dibutyl phthalate (DBP) (CAS Prohibited at or above 0.1% by weight (or 1000ppm) in homogeneous 1, 44, 61, 73
84-74-2)
materials. The restriction of DEHP, BBP, DBP and DIBP shall apply
to medical devices, including in vitro medical devices, and
monitoring and control instruments, including industrial monitoring
and control instruments, from 22 July 2021. For all other equipment
the restriction is in effect.
Dibutyltin (DBT) compounds Prohibited in Chemicals, Mixtures, Preparations, and Articles where 1, 2, 40, 73
(Annex KK)
the concentration in the Mixture, Preparation, or Article, or part
thereof, is greater than the equivalent of 0.1% by weight of tin.
Diisobutyl phthalate (DIBP)
Prohibited at or above 0.1% by weight (or 1000ppm) in homogeneous 44, 61
(CAS 84-69-5)
materials. The restriction of DEHP, BBP, DBP and DIBP shall apply
to medical devices, including in vitro medical devices, and
monitoring and control instruments, including industrial monitoring
and control instruments, from 22 July 2021. For all other equipment
the restriction is in effect.
Diisopentylphthalate (CAS 605- Prohibited in clothing or related accessories, and textiles which under 1, 73
50-5)
normal or reasonably foreseeable conditions of use come into contact
with human skin - concentration limit of 1000 mg/kg (individually or
in combination with other phthalates regulated in REACH Annex
XVII.) Disposable textiles, not for clothing, are exempt.
Di-n-hexyl phthalate (DnHP) Prohibited in clothing or related accessories, and textiles which under 1, 73
(CAS 84-75-3)
normal or reasonably foreseeable conditions of use come into contact
with human skin - concentration limit of 1000 mg/kg (individually or
in combination with other phthalates regulated in REACH Annex
XVII.) Disposable textiles, not for clothing, are exempt.
N,N-dimethylformamide;
Prohibited in clothing or related accessories, and textiles which under 1, 73
dimethyl formamide (DMF)
normal or reasonably foreseeable conditions of use come into contact
(CAS 68-12-2)
with human skin - concentration limit of 3000 mg/kg. Disposable
textiles, not for clothing, are exempt.
N,N-dimethylacetamide
Prohibited in clothing or related accessories, and textiles which under 1, 73
(DMAC) (CAS 127-19-5)
normal or reasonably foreseeable conditions of use come into contact
with human skin - concentration limit of 3000 mg/kg. Disposable
textiles, not for clothing, are exempt.
Di-n-pentyl phthalate (DPP)
Prohibited in clothing or related accessories, and textiles which under 1, 73
(CAS 131-18-0)
normal or reasonably foreseeable conditions of use come into contact
with human skin - concentration limit of 1000 mg/kg (individually or
in combination with other phthalates regulated in REACH Annex
XVII.) Disposable textiles, not for clothing, are exempt.
Dimethylfumarate (CAS 624- Prohibited in Articles, Products, Parts, and Deliverable greater than 1, 30, 73
49-7)
0.1 mg/kg of the weight of the Article, Product, Part or Deliverable.
Prohibited in pouches (e.g., desiccants) and in chemicals, Substances,
and Preparations.
Dioctylin (DOT) compounds Prohibited in concentrations greater than the equivalent of 0.1% by 1, 73
(e.g., dioctyltin oxide CAS 870- weight of tin in:
08-6 and dioctyltin dilaurate
1.Textile articles intended to come into contact with skin, and
CAS 3648-18-8)
2.Two-component room temperature vulcanization molding kits
(RTV-2 molding kits).
Prohibited in Chemicals.
40
PN 46G3772 Page 14 of 197 EC J85151 13MAY05
EC 899569 04NOV93 EC G32590 08FEB06
EC 899773 07DEC94 EC L04925B 11JAN07
EC F15040 25AUG97 EC L04925M 01AUG07
EC F73298 02SEP99 EC L04925N 19FEB08
EC F74336 05SEP00 EC L05962X 08AUG08
EC F72950 23JAN02 EC L79598 25FEB09
EC H64064 13MAY03 EC N24534E 02OCT09
EC H17205 29JUL03 EC L79598A 22FEB10
EC L79598B 22SEPT10
EC L79598C 27APR2011
EC L79598D 6SEPT2011
EC N31517Y 26MAR2012
ECN31946T 19APR2013
ECN33076 5DEC2013
ECN33076A 16MAY2014
ECN46883 17OCT2014
ECP02692 26MAY2015
ECO P02838 15OCT2015
ECOP17505 21APR2016
ECO P17633 1OCT2016
ECOP17764 20MAR2017
ECOP17905 16OCT2017
ECOP17958 Jan 25, 2018
ECOP44540 June 11, 2018
ECOP44680 Mar 5, 2019
ECOP44794 Aug 9, 2019
ECO P44877 15Feb2020
ECO P45188 1Sept2020
ECO P45272 9Mar2021
ECO P45379 18Oct2021
ECO 45443 4April2022
ECO P45475 14Nov2022
This document is the property of IBM. Its use is authorized only for responding to a request for quotation or for the performance of work for IBM. All questions must be referred to the IBM Procurement Department requesting the quotation or performance of work.
Engineering Specification
Page 15 of 197
Table 1. Prohibited from Use in Hardware Deliverables, Parts, Products, Chemicals, Mixtures, Substances, and Preparations
Chemical Substance Category
Details of Restriction
Sample Regulatory
References
Fluorinated ethers and alcohols Prohibited.
32
(Annex SS)
Formaldehyde (CAS 50-00-0)
1. Materials capable of releasing formaldehyde into the air, under reasonably foreseeable conditions of use at concentrations reaching or exceeding 0.1 ppm are prohibited. 2. The use of formaldehyde in textiles intended for skin contact is prohibited (e.g., Wrist straps and headphones) above 75 mg/kg
25 11, 29
formaldehyde. The use of formaldehyde in textiles not intended for skin contact is prohibited above 300 mg/kg.
3. The use of formaldehyde in wood applications may not be used if the formaldehyde emission caused by the wooden materials exceeds 0.1 ml/m3 (ppm) in the air of a test chamber. Formaldehyde emission standards in Composite Wood must not exceed the following limits (see Section 2.11 for more details): Hardwood Plywood Veneer Core - 0.05 ppm Hardwood Plywood Composite Core - 0.05 ppm
20, 21 24
Particleboard - 0.09 ppm Medium Density Fiberboard - 0.11 ppm
Thin Medium Density Fiberboard - 0.13 ppm. 4.Prohibited in clothing or related accessories, and textiles which
1, 73
under normal or reasonably foreseeable conditions of use come into contact with human skin - concentration limit of 75 mg/kg. Disposable textiles, not for clothing, are exempt.
Halogenated aromatic substances (Annex D)
Prohibited from use in capacitors and transformers above 500 ppm for monohalogenated or 50 ppm for polyhalogenated aromatic substances in materials of the component. (Please note PCBs have
1, 2, 73
further restrictions, see entry in this Table for PCBs.)
Halogenated diphenyl methanes Prohibited from use and in Preparations and products containing it. 1, 12, 73
(Annex E)
Halogenated Flame Retardants The use of halogenated flame retardants is not allowed in the
74
enclosure and stand of Electronic Displays.
Hexabromocyclododecane
Prohibited except as Unintentional Trace Contamination in Articles, 1, 2, 15, 37, 40,
(HBCDD) and all major diastereoisomers identified
Substance, and Preparations, not exceeding 100 mg/kg (0.01% by weight) of the Article.
63, 67, 73
(alpha HBCDD, beta HBCDD, gamma HBCDD) (CAS 2563799-4, 3194-55-6, 134237-50-6, 134237-51-7, 134237-52-8)
Hexachlorobenzene (CAS 118- Prohibited except as Unintentional Trace Contamination. 74-1
2, 15, 37, 40
Hexachlorobutadiene (CAS 87- Prohibited.
2, 10, 15, 36, 37,
68-3)
63, 80
PN 46G3772 Page 15 of 197 EC J85151 13MAY05
EC 899569 04NOV93 EC G32590 08FEB06
EC 899773 07DEC94 EC L04925B 11JAN07
EC F15040 25AUG97 EC L04925M 01AUG07
EC F73298 02SEP99 EC L04925N 19FEB08
EC F74336 05SEP00 EC L05962X 08AUG08
EC F72950 23JAN02 EC L79598 25FEB09
EC H64064 13MAY03 EC N24534E 02OCT09
EC H17205 29JUL03 EC L79598A 22FEB10
EC L79598B 22SEPT10
EC L79598C 27APR2011
EC L79598D 6SEPT2011
EC N31517Y 26MAR2012
ECN31946T 19APR2013
ECN33076 5DEC2013
ECN33076A 16MAY2014
ECN46883 17OCT2014
ECP02692 26MAY2015
ECO P02838 15OCT2015
ECOP17505 21APR2016
ECO P17633 1OCT2016
ECOP17764 20MAR2017
ECOP17905 16OCT2017
ECOP17958 Jan 25, 2018
ECOP44540 June 11, 2018
ECOP44680 Mar 5, 2019
ECOP44794 Aug 9, 2019
ECO P44877 15Feb2020
ECO P45188 1Sept2020
ECO P45272 9Mar2021
ECO P45379 18Oct2021
ECO 45443 4April2022
ECO P45475 14Nov2022
This document is the property of IBM. Its use is authorized only for responding to a request for quotation or for the performance of work for IBM. All questions must be referred to the IBM Procurement Department requesting the quotation or performance of work.
Engineering Specification
Page 16 of 197
Table 1. Prohibited from Use in Hardware Deliverables, Parts, Products, Chemicals, Mixtures, Substances, and
Preparations
Chemical Substance Category
Details of Restriction
Sample
Regulatory
References
Hexavalent Chromium/
Intentional Addition is prohibited by IBM in paints and plastic resins. IBM
Hexavalent Chromium
Prohibited in leather articles or articles containing leather parts
Requirement
Compounds (Annex G) *
coming into contact with skin in concentrations equal to or greater
1, 73
than 3 mg/kg (0.0003% by weight) of the total dry weight of the
leather.
Chromium VI (hexavalent chromium) compounds listed in REACH 1, 73
Annex XVII Appendices 1 6 (as Carcinogen, Mutagen or
Reproductive toxicant) are prohibited in clothing or related
accessories, and textiles which under normal or reasonably
foreseeable conditions of use come into contact with human skin -
concentration limit of 1 mg/kg Chromium VI that can be extracted.
Disposable textiles, not for clothing, are exempt.
Hydrofluorocarbons (Annex JJ) Prohibited in non-refillable containers, foams, and non-confined,
32, 69, 72
direct evaporation systems containing refrigerants. Prohibited in new
products and applications from October 2014.
Inorganic ammonium salts
Prohibited in cellulose insulation mixtures or cellulose insulation
1, 73
articles unless the emission of ammonia results in a concentration of less than 3 ppm by volume (2.12 mg/ m3) under test conditions cited
in Annex XVII to EU Regulation No 1907/20006 (REACH).
Lead/ Lead Compounds (Annex 1. Lead carbonates (CAS 598-63-0 and 1319-46-6) and lead sulfates 1, 12, 73
H) *
(CAS 7446-14-2 and 15739-80-7) may not be used as Substances,
Mixtures, and constituents of Preparations intended for use as paints.
2. Paints and varnishes shall not have lead or lead compounds with 2
a lead content of 0.01% or more by mass. The prohibition is also for
Articles treated with such paints and varnishes.
3. Lead is prohibited in wood-based materials in excess of 90
milligrams per kilogram of dry matter.
4. The lead content of the surface layer of cables and cords for
14
Frequently Handled Cables (e.g., Mouse cables) must be below 300
ppm. See Definitions Section for examples of Frequently Handled
Cables. A lab analysis will be required to document the lead content
for these types of cables. See Section 2.3.1 for details about the
analysis.
5. For restrictions in battery applications see Table 8.
6. Lead as an ingredient in the manufacturing of paints, enamels,
39, 42
coatings and inks is prohibited when the total lead content of 600
ppm or greater in the non-volatile part of the product or a dry film of
the product (more restrictive level for paint below).
7. Prohibited in Chemicals
40
8. Lead is prohibited in paints or similar surface coating material in 50, 54
excess of 0.009 percent (90 ppm) of the weight of the total non-
volatile content of the weight of the dried paints film.
9. Lead and compounds listed in REACH Annex XVII Appendices 1, 73
1 6 (as Carcinogen, Mutagen or Reproductive toxicant) are
prohibited in clothing or related accessories, and textiles which under
normal or reasonably foreseeable conditions of use come into contact
with human skin - concentration limit of 1 mg/kg Lead metal that can
be extracted. Disposable textiles, not for clothing, are exempt.
PN 46G3772 Page 16 of 197 EC J85151 13MAY05
EC 899569 04NOV93 EC G32590 08FEB06
EC 899773 07DEC94 EC L04925B 11JAN07
EC F15040 25AUG97 EC L04925M 01AUG07
EC F73298 02SEP99 EC L04925N 19FEB08
EC F74336 05SEP00 EC L05962X 08AUG08
EC F72950 23JAN02 EC L79598 25FEB09
EC H64064 13MAY03 EC N24534E 02OCT09
EC H17205 29JUL03 EC L79598A 22FEB10
EC L79598B 22SEPT10
EC L79598C 27APR2011
EC L79598D 6SEPT2011
EC N31517Y 26MAR2012
ECN31946T 19APR2013
ECN33076 5DEC2013
ECN33076A 16MAY2014
ECN46883 17OCT2014
ECP02692 26MAY2015
ECO P02838 15OCT2015
ECOP17505 21APR2016
ECO P17633 1OCT2016
ECOP17764 20MAR2017
ECOP17905 16OCT2017
ECOP17958 Jan 25, 2018
ECOP44540 June 11, 2018
ECOP44680 Mar 5, 2019
ECOP44794 Aug 9, 2019
ECO P44877 15Feb2020
ECO P45188 1Sept2020
ECO P45272 9Mar2021
ECO P45379 18Oct2021
ECO 45443 4April2022
ECO P45475 14Nov2022
This document is the property of IBM. Its use is authorized only for responding to a request for quotation or for the performance of work for IBM. All questions must be referred to the IBM Procurement Department requesting the quotation or performance of work.
Engineering Specification
Page 17 of 197
Table 1. Prohibited from Use in Hardware Deliverables, Parts, Products, Chemicals, Mixtures, Substances, and
Preparations
Chemical Substance Category
Details of Restriction
Sample
Regulatory
References
Mercury/ Mercury Compounds Prohibited in Deliverables, including Articles, Parts, Products,
1, 2, 8, 9, 12, 13,
(Annex I) *
Substances, Materials, Mixtures, Preparations, Chemicals, and
15, 17, 18, 40, 45,
Chemical Product Supplies, except as unavoidable impurity at levels 47, 54, 57, 58, 70,
below 10ppm. Please note, there may be existing products with cold 73, 75, 76
cathode fluorescent lamps (CCFLs), released prior to October 2014.
No new products may use mercury containing CCFLs as of October
2014.
Mercury use in cold cathode fluorescent lamps, for previously
released parts, has multiple requirements including labeling (see
section 2.6). When present in an approved application, IBM must be
supplied with a data sheet on mercury content.
For additional mercury restrictions in batteries, see Table 8.
2-methoxyethanol (CAS 109- Prohibited in substances, mixtures, preparations and in products
15
86-4) (See Table 2 for more
unless the substance is incidentally present.
restrictive requirements for
ethylene-based glycol ethers for
IBM Field Use Materials and
Chemical Product Supplies.)
2-(2-methoxyethoxy)ethanol
Prohibited in paints, paint strippers, varnishes, cleaning agents, and 1, 2, 73
(DEGME) (CAS 111-77-3)
self-shining emulsions in concentrations equal to or greater than 0.1%
by weight.
N-methyl-2-pyrrolidone; 1-
Prohibited in clothing or related accessories, and textiles which under 1, 73
methyl-2-pyrrolidone (NMP) normal or reasonably foreseeable conditions of use come into contact
(CAS 872-50-4)
with human skin - concentration limit of 3000 mg/kg. Disposable
textiles, not for clothing, are exempt. Prohibited in Substances.
Prohibited in Mixtures in a concentration equal to or greater than
0.03% by weight.
4-methoxy-m-phenylene
Prohibited in clothing or related accessories, and textiles which under 1, 73
diammonium sulphate; 2,4-
normal or reasonably foreseeable conditions of use come into contact
diaminoanisole sulphate (CAS with human skin - concentration limit of 30 mg/kg. Disposable
39156-41-7)
textiles, not for clothing, are exempt.
Monomethyl- dibromo-
Prohibited in Chemicals, Substances, Mixtures, Preparations and
1, 2, 40, 73, IBM
diphenyl methane
Articles.
Requirement
bromobenzylbromo-toluene,
mixture of isomers (Trade name
DBBT) (CAS 99688-47-8)
Monomethyl-dichloro- diphenyl Prohibited in Chemicals, Substances, Mixtures, Preparations and
1, 2, 40, 73, IBM
methane (Trade names Ugilec Articles
Requirement
121 and Ugilec 21) (CAS
81161-70-8)
Monomethyl-
Prohibited in Chemicals, Substances, Mixtures, Preparations, and
1, 2, 40, 73, IBM
tetrachlorodiphenyl methane
Articles.
Requirement
(Trade name Ugilec 141) (CAS
76253-60-6)
PN 46G3772 Page 17 of 197 EC J85151 13MAY05
EC 899569 04NOV93 EC G32590 08FEB06
EC 899773 07DEC94 EC L04925B 11JAN07
EC F15040 25AUG97 EC L04925M 01AUG07
EC F73298 02SEP99 EC L04925N 19FEB08
EC F74336 05SEP00 EC L05962X 08AUG08
EC F72950 23JAN02 EC L79598 25FEB09
EC H64064 13MAY03 EC N24534E 02OCT09
EC H17205 29JUL03 EC L79598A 22FEB10
EC L79598B 22SEPT10
EC L79598C 27APR2011
EC L79598D 6SEPT2011
EC N31517Y 26MAR2012
ECN31946T 19APR2013
ECN33076 5DEC2013
ECN33076A 16MAY2014
ECN46883 17OCT2014
ECP02692 26MAY2015
ECO P02838 15OCT2015
ECOP17505 21APR2016
ECO P17633 1OCT2016
ECOP17764 20MAR2017
ECOP17905 16OCT2017
ECOP17958 Jan 25, 2018
ECOP44540 June 11, 2018
ECOP44680 Mar 5, 2019
ECOP44794 Aug 9, 2019
ECO P44877 15Feb2020
ECO P45188 1Sept2020
ECO P45272 9Mar2021
ECO P45379 18Oct2021
ECO 45443 4April2022
ECO P45475 14Nov2022
This document is the property of IBM. Its use is authorized only for responding to a request for quotation or for the performance of work for IBM. All questions must be referred to the IBM Procurement Department requesting the quotation or performance of work.
Engineering Specification
Page 18 of 197
Table 1. Prohibited from Use in Hardware Deliverables, Parts, Products, Chemicals, Mixtures, Substances, and
Preparations
Chemical Substance Category
Details of Restriction
Sample
Regulatory
References
Nanomaterials. Substance
Prohibited in Articles and complex objects (an object consisting of a 48
produced in nanoparticular state: a substance containing particles, in an unbound state or as an aggregate or as an agglomerate and where, for 50 % or more of the particles in the number size distribution, one or more external dimensions is in the size range of 1 nanometer (nm) to 100 nm, with the exception of
set of Articles) where a fraction of at least one of the substances produced in nanoparticular state exceeding 0.1 % of the mass originally contained in the Article or complex object is released. An exemption to this requirement is for Pigments, when placed on the market in a mixture, an article or a complex object. Pigment is defined as a substance that is insoluble in the standard suspension media and is used for its optical properties [Source: Belgium Royal Decree concerning the placing on the market of substances produced
natural, non-chemically modified substances and the substances of
in nanoparticular state.]
which the fraction between one
nanometer and one hundred
nanometers is a by-product of
human activity. Fullerenes,
graphene flakes and single and
multi-walled carbon nanotubes with
one or more external dimensions
below 1 nm shall be deemed to be
substances produced in
nanoparticular state. Other common
nanomaterials include silver
nanoparticles, iron nanoparticles,
titanium dioxide, aluminum oxide,
cerium oxide, zinc oxide, silicon
dioxide and dendrimers with
external dimensions listed above.
2-Naphthylammoniumacetate Prohibited in clothing or related accessories, and textiles which under 1, 73
(CAS 553-00-4)
normal or reasonably foreseeable conditions of use come into contact
with human skin - concentration limit of 30 mg/kg. Disposable
textiles, not for clothing, are exempt.
Nickel and compounds
Nickel finishes are prohibited on surfaces that are designed to be in 1, 73
(Annex J)
prolonged contact with skin. Examples of relevant applications in the
electronics industry include wrist straps, mice, mouse pads,
keyboards, headphones, and portable electronic products designed to
be frequently handled. Contact your IBM representative for questions
about use of the Deliverable in an IBM application which may or may
not be in prolonged contact with skin.
Nitrogen trifluoride (CAS
Prohibited in Preparations and Articles.
2, 32
7783-54-2)
Nonylphenol ethoxylates
Prohibited in textile articles in concentrations equal to or greater than 1, 73
(Annex VV)
0.01% by weight of the textile article or of each part of the textile
article.
Prohibited in Chemicals, Substances, Mixtures, and Preparations.
40
Ozone-Depleting Substances Prohibited in Deliverables and Deliverables may not be manufactured 2, 5, 6, 7, 12, 65,
(CFCs, HCFCs, HBFCs, carbon with these substances.
69, 72, IBM
tetrachloride, etc.) (Annex K)
Requirement
Pentachlorobenzene (CAS 608- Prohibited.
2, 10, 15, 37, 40,
93-5)
63
Pentachlorophenol (CAS 87-86- Prohibited in Substances and Chemicals. Prohibited in Substances.
1, 2, 10, 73, 37
5) and its salts and esters
Prohibited in Mixtures in a concentration equal to or greater than
(Annex HH)
0.1% by weight.
Prohibited in the treatment of wood. Prohibited in wood-based
36, 63
materials in excess of 3 milligrams per kilogram of dry matter.
PN 46G3772 Page 18 of 197 EC J85151 13MAY05
EC 899569 04NOV93 EC G32590 08FEB06
EC 899773 07DEC94 EC L04925B 11JAN07
EC F15040 25AUG97 EC L04925M 01AUG07
EC F73298 02SEP99 EC L04925N 19FEB08
EC F74336 05SEP00 EC L05962X 08AUG08
EC F72950 23JAN02 EC L79598 25FEB09
EC H64064 13MAY03 EC N24534E 02OCT09
EC H17205 29JUL03 EC L79598A 22FEB10
EC L79598B 22SEPT10
EC L79598C 27APR2011
EC L79598D 6SEPT2011
EC N31517Y 26MAR2012
ECN31946T 19APR2013
ECN33076 5DEC2013
ECN33076A 16MAY2014
ECN46883 17OCT2014
ECP02692 26MAY2015
ECO P02838 15OCT2015
ECOP17505 21APR2016
ECO P17633 1OCT2016
ECOP17764 20MAR2017
ECOP17905 16OCT2017
ECOP17958 Jan 25, 2018
ECOP44540 June 11, 2018
ECOP44680 Mar 5, 2019
ECOP44794 Aug 9, 2019
ECO P44877 15Feb2020
ECO P45188 1Sept2020
ECO P45272 9Mar2021
ECO P45379 18Oct2021
ECO 45443 4April2022
ECO P45475 14Nov2022
This document is the property of IBM. Its use is authorized only for responding to a request for quotation or for the performance of work for IBM. All questions must be referred to the IBM Procurement Department requesting the quotation or performance of work.
Engineering Specification
Page 19 of 197
Table 1. Prohibited from Use in Hardware Deliverables, Parts, Products, Chemicals, Mixtures, Substances, and
Preparations
Chemical Substance Category
Details of Restriction
Sample
Regulatory
References
Pentachlorothiophenol (PCTP) Prohibited in an Article, or any part thereof, in a concentration equal 80
(CAS 133 493)
to or greater than 1% by weight.
Perfluorocarbons (PFC)
Must not be contained in Products or Parts as a gas. Prohibited in 4, 27, 32
(Annex L)
non-refillable containers, foams, and non-confined direct evaporation
systems containing refrigerants.
Perfluorooctane sulfonate
1. Prohibited in Substances, in Mixtures or as a constituent of
1, 2, 10, 15, 36,
(PFOS), its salts, precursors,
Preparations in a concentration higher than 10mg/kg (0.001% by
37, 40, 73
and related substances.
weight).
Perfluorooctane sulfonate
(PFOS) refers to a molecule
2. Prohibited in deliverables, products, parts and articles, except as
with the following molecular Unintentional Trace Contaminations, not exceeding 0.1% by weight.
formula: C8F17SO2X
[X=OH, metal salt, halide
(F/Cl/Br/I), amide and other
3. Prohibited in textiles, except as Unintentional Trace
77
derivatives including
Contaminations, not exceeding 1 ug/m2.
polymers]. For a list of CAS
numbers see category codes
4. PFHxS - Prohibited in Substances, Mixtures, constituents of
201, 202, 203, 203.01, 203.02, 203.03, 203.04, 203.05, 204,
Preparations and Articles, except as Unintentional Trace Contamination, not exceeding 25 ppb (0.025 mg/kg or 0.0000025 %
67, 83
204.01, 204.02, 204.03, and
by weight) or not exceeding 0.0001% (100 ppb) total content of
205 in the OECD
PFHxS- related substances.
Comprehensive Database of
Per- and polyfluoroalkyl
substances:
http://www.oecd.org/chemicals
afety/risk-management/global-
database-of-per-and-
polyfluoroalkyl-substances.xlsx
Note: This grouping also includes Perfluorohexane (CAS 355-42-0) and Perfluorhexane sulfonic acid-related substances in the form of linear or branched isomers and their salts (PFHxS)
(See Table 2 PFAS requirements for more restrictive requirements for IBM Field Use Materials and Chemical Product Supplies)
PN 46G3772 Page 19 of 197 EC J85151 13MAY05
EC 899569 04NOV93 EC G32590 08FEB06
EC 899773 07DEC94 EC L04925B 11JAN07
EC F15040 25AUG97 EC L04925M 01AUG07
EC F73298 02SEP99 EC L04925N 19FEB08
EC F74336 05SEP00 EC L05962X 08AUG08
EC F72950 23JAN02 EC L79598 25FEB09
EC H64064 13MAY03 EC N24534E 02OCT09
EC H17205 29JUL03 EC L79598A 22FEB10
EC L79598B 22SEPT10
EC L79598C 27APR2011
EC L79598D 6SEPT2011
EC N31517Y 26MAR2012
ECN31946T 19APR2013
ECN33076 5DEC2013
ECN33076A 16MAY2014
ECN46883 17OCT2014
ECP02692 26MAY2015
ECO P02838 15OCT2015
ECOP17505 21APR2016
ECO P17633 1OCT2016
ECOP17764 20MAR2017
ECOP17905 16OCT2017
ECOP17958 Jan 25, 2018
ECOP44540 June 11, 2018
ECOP44680 Mar 5, 2019
ECOP44794 Aug 9, 2019
ECO P44877 15Feb2020
ECO P45188 1Sept2020
ECO P45272 9Mar2021
ECO P45379 18Oct2021
ECO 45443 4April2022
ECO P45475 14Nov2022
This document is the property of IBM. Its use is authorized only for responding to a request for quotation or for the performance of work for IBM. All questions must be referred to the IBM Procurement Department requesting the quotation or performance of work.
Engineering Specification
Page 20 of 197
Table 1. Prohibited from Use in Hardware Deliverables, Parts, Products, Chemicals, Mixtures, Substances, and
Preparations
Chemical Substance Category
Details of Restriction
Sample
Regulatory
References
Perfluorooctanoic acid (PFOA), 1.Prohibited in Substances, Constituents of Substances, Mixtures and 67, 73, 78, 79, 81
its salts, precursors, and related
Articles, except as Unintentional Trace Contaminations, not
substances. Perfluorooctanoic
exceeding 25 ppb (0.025 mg/kg or 0.0000025 % by weight) or
acid (PFOA) refers to a fully
not exceeding 260 ppb for a combination of PFOA-related
fluorinated, eight-carbon chain
substances.
carboxylic acid
2.Prohibited in mixtures and Articles, except as Unintentional Trace
(CnF2n+1COOH, n = 7; 7
Contaminants, not exceeding1 mg/kg (0,0001 % by weight) for
carbons in the perfluoroalkyl
industrial and professional uses containing PTFE (aka Teflon)
chain) and its derivative. For a
micropowders of PFOA and its salts. The manufacturing,
list of CAS numbers see
placing on the market and use of PFOA, its salts and PFOA-
category codes 102, 103,
related compounds shall be allowed for the following purposes:
103.01, 103.02, and 104, in the
(a) photolithography or etch processes in semiconductor
OECD Comprehensive
manufacturing, until 4 July 2025; (b) photographic coatings
Database of Per- and
applied to films, until 4 July 2025.
polyfluoroalkyl substances:
http://www.oecd.org/chemicals
afety/risk-management/global- (See Table 2 PFAS requirements for more restrictive requirements
database-of-per-and-
for IBM Field Use Materials and Chemical Product Supplies)
polyfluoroalkyl-substances.xlsx
Note: This grouping also includes Long Chain (C8-C20) Perfluorocarboxylic acids (LCPFCAs), its salts, precursors, and related substances.
Phenol, 2- (2H-benzotriazol -2yl) - 4,6-bis (1,1dimethylethyl) (CAS 3846-717) PIP (3:1) - phenol, isopropylated phosphate (3:1), also known as tris(4isopropylphenyl) phosphate (CAS 68937417) Polybrominated Diphenyl ethers (PBDEs); also known as Polybrominated Biphenyl ethers (PBBEs) or Polybrominated Biphenyl Oxides (PBBOs); except Decabromo diphenyl ether (see this substance in separate entry) (See Annex N and Annex M for a limited list.) * Polychlorinated biphenyls (PCBs) (Annex O)
Polychlorinated naphthalenes, C10H8-nCln where "n" is greater than 1 (Annex R)
Prohibited in decorative laminate, adhesives, paints, printing inks, inked ribbon, and molded plastic products. Prohibited.
Prohibited in Deliverables, including Chemicals.
Prohibited except as an Unintentional Trace Contamination not exceeding 0.2 ppm. (Please note PCBs are prohibited by other regulations; see halogenated aromatic substances in Table 1 and Annex O.) Prohibited including in Field Use Materials, Substances, Preparations, Mixtures, and Chemical Product Supplies.
10
80
2, 10, 15, 16, 36, 40, 51, 63, 73, IBM Requirement
1, 2, 10, 12, 36, 37, 40, 63, 65, 67, 68, 71, 73, 78, 79, IBM Requirement 2, 10, 15, 37, 64
PN 46G3772 Page 20 of 197 EC J85151 13MAY05
EC 899569 04NOV93 EC G32590 08FEB06
EC 899773 07DEC94 EC L04925B 11JAN07
EC F15040 25AUG97 EC L04925M 01AUG07
EC F73298 02SEP99 EC L04925N 19FEB08
EC F74336 05SEP00 EC L05962X 08AUG08
EC F72950 23JAN02 EC L79598 25FEB09
EC H64064 13MAY03 EC N24534E 02OCT09
EC H17205 29JUL03 EC L79598A 22FEB10
EC L79598B 22SEPT10
EC L79598C 27APR2011
EC L79598D 6SEPT2011
EC N31517Y 26MAR2012
ECN31946T 19APR2013
ECN33076 5DEC2013
ECN33076A 16MAY2014
ECN46883 17OCT2014
ECP02692 26MAY2015
ECO P02838 15OCT2015
ECOP17505 21APR2016
ECO P17633 1OCT2016
ECOP17764 20MAR2017
ECOP17905 16OCT2017
ECOP17958 Jan 25, 2018
ECOP44540 June 11, 2018
ECOP44680 Mar 5, 2019
ECOP44794 Aug 9, 2019
ECO P44877 15Feb2020
ECO P45188 1Sept2020
ECO P45272 9Mar2021
ECO P45379 18Oct2021
ECO 45443 4April2022
ECO P45475 14Nov2022
This document is the property of IBM. Its use is authorized only for responding to a request for quotation or for the performance of work for IBM. All questions must be referred to the IBM Procurement Department requesting the quotation or performance of work.
Engineering Specification
Page 21 of 197
Table 1. Prohibited from Use in Hardware Deliverables, Parts, Products, Chemicals, Mixtures, Substances, and
Preparations
Chemical Substance Category
Details of Restriction
Sample
Regulatory
References
Polychlorinated terphenyls
Prohibited, including Chemicals.
1, 12, 15, 40, 65,
(PCTs) (e.g., CAS 61788-33-8)
73
Polycyclic aromatic
Prohibited in Articles at and above 1 mg/kg by weight, if any rubber 1, 2, 73
hydrocarbons (PAHs) (Annex or plastic component comes in to direct and prolonged or short-term
LL)
repetitive contact with skin or oral cavity under normal or reasonable
foreseeable conditions of use. Examples include, but are not limited
to wrist straps, mice, mouse pads and keyboards.
Quinoline (CAS 91-22-5)
Prohibited in clothing or related accessories, and textiles which under 1, 73
normal or reasonably foreseeable conditions of use come into contact
with human skin - concentration limit of 50 mg/kg. Disposable
textiles, not for clothing, are exempt
Radioactive substances
Prohibited above background radiation.
14, 52, 53, 65
(Annex CC)
Short chain Chlorinated
Prohibited except as Unintentional Trace Contamination in products, 1, 2, 10, 12, 15,
Paraffins (C 10 -13) (also referred Substances, Mixtures, and Preparations, not exceeding 0.1% by
37, 64, 73,81
to as Short-chain Chlorinated weight.
Alkanes) (Annex P)
Prohibited in Chemicals.
40
Substances having endocrine In Vitro Medical Devices must be designed and manufactured to
59, 60, 62
disrupting properties which are reduce the risks posed by these substances to a level as low as
identified by EU REACH
reasonably practicable, including wear debris, degradation products
Regulation 1907/2006 Article and processing residues.
59 for Annex XIV Authorized Medical Devices must be designed and manufactured to reduce the
substances
risks posed by these substances to a level as low as reasonably
practicable, including wear debris, degradation products and
processing residues. Substances must be below 0.1% weight by
weight.
Sulphur hexafluoride (CAS
Prohibited in Preparations and Articles. Prohibited in foams and non- 2, 27, 32, 65
2551-62-4)
refillable containers.
1,4,5,8-
Prohibited in clothing or related accessories, and textiles which under 1, 73
tetraaminoanthraquinone; C.I. normal or reasonably foreseeable conditions of use come into contact
Disperse Blue 1 (CAS 2475-45- with human skin - concentration limit of 50 mg/kg. Disposable
8)
textiles, not for clothing, are exempt.
Tetrachlorobenzene (CAS
Prohibited
2, 15
numbers included in Annex D)
a, a,a,4-tetrachlorotoluene; p- Prohibited in clothing or related accessories, and textiles which under 1, 73
chloro-benzotrichloride (CAS normal or reasonably foreseeable conditions of use come into contact
5216-25-1)
with human skin - concentration limit of 1 mg/kg. Disposable textiles,
not for clothing, are exempt.
a, a, a,-trichlorotoluene;
Prohibited in clothing or related accessories, and textiles which under 1, 73
benzotrichloride (CAS 98-07-7) normal or reasonably foreseeable conditions of use come into contact
with human skin - concentration limit of 1 mg/kg. Disposable textiles,
not for clothing, are exempt
2,4,5-trimethylaniline
Prohibited in clothing or related accessories, and textiles which under 1, 73
hydrochloride (CAS 21436-97- normal or reasonably foreseeable conditions of use come into contact
5)
with human skin - concentration limit of 30 mg/kg. Disposable
textiles, not for clothing, are exempt
PN 46G3772 Page 21 of 197 EC J85151 13MAY05
EC 899569 04NOV93 EC G32590 08FEB06
EC 899773 07DEC94 EC L04925B 11JAN07
EC F15040 25AUG97 EC L04925M 01AUG07
EC F73298 02SEP99 EC L04925N 19FEB08
EC F74336 05SEP00 EC L05962X 08AUG08
EC F72950 23JAN02 EC L79598 25FEB09
EC H64064 13MAY03 EC N24534E 02OCT09
EC H17205 29JUL03 EC L79598A 22FEB10
EC L79598B 22SEPT10
EC L79598C 27APR2011
EC L79598D 6SEPT2011
EC N31517Y 26MAR2012
ECN31946T 19APR2013
ECN33076 5DEC2013
ECN33076A 16MAY2014
ECN46883 17OCT2014
ECP02692 26MAY2015
ECO P02838 15OCT2015
ECOP17505 21APR2016
ECO P17633 1OCT2016
ECOP17764 20MAR2017
ECOP17905 16OCT2017
ECOP17958 Jan 25, 2018
ECOP44540 June 11, 2018
ECOP44680 Mar 5, 2019
ECOP44794 Aug 9, 2019
ECO P44877 15Feb2020
ECO P45188 1Sept2020
ECO P45272 9Mar2021
ECO P45379 18Oct2021
ECO 45443 4April2022
ECO P45475 14Nov2022
This document is the property of IBM. Its use is authorized only for responding to a request for quotation or for the performance of work for IBM. All questions must be referred to the IBM Procurement Department requesting the quotation or performance of work.
Engineering Specification
Page 22 of 197
Table 1. Prohibited from Use in Hardware Deliverables, Parts, Products, Chemicals, Mixtures, Substances, and
Preparations
Chemical Substance Category
Details of Restriction
Sample
Regulatory
References
Tris (1,3-dichloro-2-propyl)
Prohibited above 0.1% by mass in any product component. Exempt 14, 49
phosphate (TDCPP) (CAS
from this requirement are cables (except cables for mice), adaptors
13674-87-8)
and other similar connecting devices and storage media, such as
compact discs, for interactive software, such as computer games. This
substance is prohibited in cables for mice. If a replacement flame
retardant for this substance is used, it cannot be a substance classified
as a "known to be a human carcinogen" or "reasonably anticipated to
be a human carcinogen" as listed by the US National Toxicology
Program in the US Department of Health and Human Services;
classified as "carcinogenic to humans" or "likely to be carcinogenic
to humans" by the US Environmental Protection Agency; or
identified by the US Environmental Protection Agency or the US
National Institutes of Health as causing birth defects, hormone
disruption, neurotoxicity, or harm to reproduction or development.
Tris-(aziridinyl) phosphine
Prohibited from use in textile articles intended to come into contact 1, 2, 12, 73
oxide (CAS 545-55-1)
with skin, e.g., Wrist straps, mouse pads, and headphones.
Prohibited in Substances and Preparations.
40
Tris (2,3 dibromopropyl)
Prohibited from use in textile articles intended to come into contact 1, 2, 12, 35, 73
phosphate (CAS 126-72-7)
with skin, e.g., Wrist straps, mouse pads, and headphones.
Prohibited in Chemicals, Substances and Preparations.
40
Tris(2-chloroethyl) phosphate Prohibited at or above 0.1% by mass in any product component. This 14, 49
(CAS 115-96-8)
restriction does not apply to desktop and laptop computers, audio and
video equipment, calculators, wireless telephones, game consoles,
handheld devices incorporating a screen that are used to access
interactive software and their associated peripherals, and cables,
adaptors and other similar connecting devices (except cables for
mice). This substance is prohibited in cables for mice. (Note: If a
replacement flame retardant for this substance is used, it cannot be a
substance classified as a "known to be a human carcinogen" or
"reasonably anticipated to be a human carcinogen" as listed by the
US National Toxicology Program in the US Department of Health
and Human Services; classified as "carcinogenic to humans" or
"likely to be carcinogenic to humans" by the US Environmental
Protection Agency; or identified by the US Environmental Protection
Agency or the US National Institutes of Health as causing birth
defects, hormone disruption, neurotoxicity, or harm to reproduction
or development.)
Tri-substituted organostannic Prohibited in Articles, or part thereof, where the concentration in the 1, 2, 15, 73
compounds, e.g., tributyltin
article is greater than the equivalent of 0.1% by weight of tin.
(TBT) (Annex EE) and
triphenyltin (TPT) (Annex EE)
* For further IBM EU RoHS requirements, see specifications 53P6233 or 97P3864. These two specifications ban the use of RoHS substances
(exemptions allowed), including hexavalent chromium and compounds in finishing processes for sheet steel, aluminized, electroless nickel and
die cast parts, fasteners and heat sinks. Hexavalent chromium and its compounds must not be used prior to painting or in other surface treatments
for metal parts. These specifications apply to Deliverables where the specifications are cited on the print, contract, Statement of Work or other
procurement documentation.
Sample regulatory references for Table 1 1) EU Regulation (EC) No 1907/2006 concerning the Registration, Evaluation, Authorization and Restriction of Chemicals (REACH). 2) Switzerland Ordinance on Risk Reduction related to the Use of certain particularly dangerous Substances, Preparations and Articles
(Ordinance on Risk Reduction related to Chemical Products) of 18 May 2005 and amendments. 3) USA Occupational Safety and Health 29 CFR 1910.1001 Asbestos. 4) Statutory Order no. 552 of 2 July 2002 Regulating Certain Industrial Greenhouse Gasses (Denmark). 5) EU Regulation (EC) No. 1005/2009 on Substances that deplete the ozone layer. 6) USA Clean Air Act Section 611 of the 1990 amendments; 40 CFR Part 82.
PN 46G3772 Page 22 of 197 EC J85151 13MAY05
EC 899569 04NOV93 EC G32590 08FEB06
EC 899773 07DEC94 EC L04925B 11JAN07
EC F15040 25AUG97 EC L04925M 01AUG07
EC F73298 02SEP99 EC L04925N 19FEB08
EC F74336 05SEP00 EC L05962X 08AUG08
EC F72950 23JAN02 EC L79598 25FEB09
EC H64064 13MAY03 EC N24534E 02OCT09
EC H17205 29JUL03 EC L79598A 22FEB10
EC L79598B 22SEPT10
EC L79598C 27APR2011
EC L79598D 6SEPT2011
EC N31517Y 26MAR2012
ECN31946T 19APR2013
ECN33076 5DEC2013
ECN33076A 16MAY2014
ECN46883 17OCT2014
ECP02692 26MAY2015
ECO P02838 15OCT2015
ECOP17505 21APR2016
ECO P17633 1OCT2016
ECOP17764 20MAR2017
ECOP17905 16OCT2017
ECOP17958 Jan 25, 2018
ECOP44540 June 11, 2018
ECOP44680 Mar 5, 2019
ECOP44794 Aug 9, 2019
ECO P44877 15Feb2020
ECO P45188 1Sept2020
ECO P45272 9Mar2021
ECO P45379 18Oct2021
ECO 45443 4April2022
ECO P45475 14Nov2022
This document is the property of IBM. Its use is authorized only for responding to a request for quotation or for the performance of work for IBM. All questions must be referred to the IBM Procurement Department requesting the quotation or performance of work.
Engineering Specification
Page 23 of 197
7) Law Concerning the Protection of the Ozone Layer through the Control of Specified Substances and Other Measures (Law No. 53 of May 20, 1988) (Japan).
8) No. 553 Decree of 9 September 1998, comprising regulations regarding products containing mercury (Decree on Product Containing Mercury, 1998 Environmentally Hazardous Substances Act) Netherlands.
9) The Mercury-containing Products (Certain) Ordinance (SFS 1991:1290) Sweden. 10) Japan Act on the Evaluation of chemical substances and Regulation of Their Manufacture, etc. and amendments. 11) The Netherlands 178 Besluit van 22 maart 2001, houdende vaststelling van het Warenwetbesluit formaldehyde in textiel. 12) Norway Product Control Regulation Chapter 2. Restricted Substances and Preparations. 13) Connecticut Public Law 02-90, the Mercury Education and Reduction Act. 14) California Safe Drinking Water and Toxic Enforcement Act of 1986. 15) Canada Environmental Protection Act, 1999. Prohibition of Certain Toxic Substances Regulations and amendments. 16) State of Washington Title 70 RCW an act relating to phasing out the use of polybrominated diphenyl ethers. 17) Louisiana Mercury Risk Reduction Act of 2006. 18) Rhode Island Mercury Education and Reduction Act. 19) Maine Public Law Chapter 296 Section 1. 38 MRSA 1609, with 2009 amendment Public Law Chap 121 Section 17 38 MRSA 1609 Sub 5. 20) Austria - BGB I 1990/194: Formaldehydeverordnung, 2, 12/2/1990. 21) Germany: LMBG B 82.02-1 Untersuchungen von Bedarfsgegenständen; Bestimmung der Formaldehydabgabe aus textilen
Bedarfsgegenständen; Ausgabe: 1985-06. 22) Norway Regulation amending regulation of 1 June 2004 No 922 relating to restrictions on the use of chemicals dangerous to health and
environment and other products. 23) Minnesota 325E.387 Ban on deca-BDE in computer enclosures. 24) California Regulation 93120 Airborne Toxic Control Measure to Reduce Formaldehyde Emissions from Composite Wood Products. 25) USA Occupational Safety and Health 29 CFR 1910.1048 Formaldehyde. 26) USA Toxic Substances Control Act 40 CFR Part 721.2800 Erionite fiber. 27) Austria Ordinance on bans and restrictions of partly fluorinated and fully fluorinated hydrocarbons and of sulfur hexafluoride 447/2002,
with amendments 246/2005, 86/2006 and 139/2007. 28) Sweden. The Chemical Products Ordinance 1998:944 to 2009:14. 29) Lithuanian Hygiene Norm HN 96:2000. 30) EU Commission Decision 2009/251/EC Products containing the biocide dimethyl fumarate. 31) Oregon SB 596 Relating to decabrominated diphenyl ether amending ORS 453.005, 453.025 and 453.085. 32) EU Regulation (EC) No 517/2014 on fluorinated greenhouse gases 33) Maryland Act concerning Environment Decabrominated Diphenyl Ether Prohibitions. 34) Canadian Environmental Protection Act, 2-butoxyethanol regulations SOR/2006-347. 35) Canada Hazardous Products Act. 36) EU Commission Regulation 757/2010 of 24 August 2010 amending Regulation No 850/2004 of the European Parliament and of the Council
on persistent organic pollutants as regards Annexes I and III. 37) EU Regulation 2019/1021 of the European Parliament and of the Council of 20 June 2019 on persistent organic pollutants (recast). 38) France Decree no. 2012-232 concerning the annual declaration of substances with nanoparticle status. 39) NORMA Official Mexicana NOM-004-SSA1-2013 Environmental Health. Limitations and sanitation specification for the use of lead
compounds. 40) EU Regulation No 649/2012 of 4 July 2012 concerning the export and import of hazardous chemicals. 41) EU Regulation No 528/2012 of the European Parliament and of the Council of 22 May 2012 concerning the making available on the market
and use of biocidal products. 42) NOM-003-SSA1-2006 Health Environmental. Health requirement to be met by the labeling of paints, inks, varnishes, lacquers and enamels. 43) USA Toxic Substances Control Act 40 CFR Part 721.1660 Benzidene-based chemical substances. 44) EU Commission Delegated Directive 2015/863 amending Annex II to Directive 2011/65/EU of the European Parliament and of the Council
as regards the list of restricted substances (RoHS). 45) Canada Products Containing Mercury SOR/2014-1244. 46) California Consumer Products Regulations - Regulation for Reducing Emissions from Consumer Products. 47) Japan Act on Preventing Environmental Pollution of Mercury. 48) Belgium Royal Decree concerning the placing on the market of substances produced in nanoparticular state. 49) Washington DC Carcinogenic Flame-Retardant Prohibition Amendment Act of 2016. 50) Philippines Chemical Control Order for lead and lead compounds. 51) Minnesota 325E.386 Products containing certain polybrominated diphenyl ethers banned 52) EU Directive 2013/59/EURATOM laying down basic safety standards for protection against the dangers arising from exposure to ionizing
radiation. 53) New Zealand Radiation Safety Act 2016. 54) Canada Consumer Product Safety Act. 55) Connecticut Public Act No 11-222 An Act Prohibiting the Use of Bisphenol-A in Thermal Receipt Paper. 56) Connecticut Regulation Concerning Consumer Products and Architectural and Industrial Maintenance Coatings. 57) Columbia Decree 2133-2016 Control measures for the importation and commercialization of mercury and the products that contain it. 58) EU Regulation 2017/852 of the European Parliament and of the Council of 17 May 2017 on mercury, repealing Regulation (EC) No
1102/3008. 59) EU Regulation 2017/746 of the European Parliament and of the Council of 5 April 2017 on in vitro diagnostic medical devices. 60) EU Regulation 2017/745 of the European Parliament and of the Council of 5 April 2017 on medical devices.
PN 46G3772 Page 23 of 197 EC J85151 13MAY05
EC 899569 04NOV93 EC G32590 08FEB06
EC 899773 07DEC94 EC L04925B 11JAN07
EC F15040 25AUG97 EC L04925M 01AUG07
EC F73298 02SEP99 EC L04925N 19FEB08
EC F74336 05SEP00 EC L05962X 08AUG08
EC F72950 23JAN02 EC L79598 25FEB09
EC H64064 13MAY03 EC N24534E 02OCT09
EC H17205 29JUL03 EC L79598A 22FEB10
EC L79598B 22SEPT10
EC L79598C 27APR2011
EC L79598D 6SEPT2011
EC N31517Y 26MAR2012
ECN31946T 19APR2013
ECN33076 5DEC2013
ECN33076A 16MAY2014
ECN46883 17OCT2014
ECP02692 26MAY2015
ECO P02838 15OCT2015
ECOP17505 21APR2016
ECO P17633 1OCT2016
ECOP17764 20MAR2017
ECOP17905 16OCT2017
ECOP17958 Jan 25, 2018
ECOP44540 June 11, 2018
ECOP44680 Mar 5, 2019
ECOP44794 Aug 9, 2019
ECO P44877 15Feb2020
ECO P45188 1Sept2020
ECO P45272 9Mar2021
ECO P45379 18Oct2021
ECO 45443 4April2022
ECO P45475 14Nov2022
This document is the property of IBM. Its use is authorized only for responding to a request for quotation or for the performance of work for IBM. All questions must be referred to the IBM Procurement Department requesting the quotation or performance of work.
Engineering Specification
Page 24 of 197
61) United Arab Emirates: Restrictions on the Use of Hazardous Materials in Electronic and Electrical Devices Control Scheme, Regulation No. 10, 2017.
62) EU Directive 93/42/EEC of 14 June 1993 concerning medical devices. 63) India Regulation of Persistent Organic Pollutants Rules, 2018. 64) Singapore Environmental Protection and Management Act Chapter 94A, Environmental Protection and Management Regulations. 65) Australia Customs (Prohibited Imports) Regulations 66) Canada Prohibition of Asbestos and Products Containing Asbestos Regulations SOR/2018-196 67) Stockholm Convention on Persistent Organic Pollutants 68) USA 21 CFR 109 Unavoidable contaminants in food for human consumption and food-packaging material. 69) Washington An Act Relating to reducing greenhouse gas emissions from1 hydrofluorocarbons and amendments 70) Argentina Resolution 75 2019 Products with added mercury 71) Argentina Resolution 4443 2019 Importation of PCBs and products or equipment that contain them. 72) Vermont No 65 An Act relating to the regulation of hydrofluorocarbons. 73) Turkey Regulation Concerning the Registration, Evaluation, Authorization and Restriction of Chemicals (REACH). 74) EU Regulation 2019/2021 of 1 October 2019 laying down ecodesign requirements for electronic displays pursuant to Directive
2009/125/EC of the European Parliament and of the Council. 75) USA Toxic Substances Control Act 40 CFR Part 721.10068 Elemental mercury 76) Massachusetts 310 CMR 75.00 Collection, Recycling, Labeling and sales ban of mercury added products. 77) Maine Chapter 06-890 Designation of PFOS and its salts as priority chemicals 78) Japan National Implementation Plan of Japan under the Stockholm Convention on Persistent Organic Pollutants 79) Japan Export Trade Control Ordinance and Import Trade Control Ordinance 80) USA Toxic Substances Control Act 40 CFR Part 751. DecaBDE, PIP (3:1), HCBD, PCTP 81) South Korea List of Persistent Organic Pollutants (POPs), Notice No. 2020-191 82) EU Regulation 2020/1021 of the European Parliament and of the Council ad regards the listing of perfluoroocatanoinc acid (PFOA), its salts
and PFOA related compounds 83) Switzerland: Reduction of Risks Linked to Use of Dangerous Substances, Preparations and Articles, Ordinance, May 2005 - Amendment -
(on adaptation to various EU Regulations) Ordinance, February 2022
2.1.2 Additional Restrictions and Requirements for Substances, Mixtures, Preparations,
Field Use Materials, and Chemical Product Supplies
Substances, Preparations, IBM Field Use Materials (FUMs), and Chemical Product Supplies must meet the applicable restrictions in Section 2.1.1 and Table 1 as well as the additional requirements in this section. This section applies to:
Substances or Preparations used on or in a Deliverable or to maintain or service hardware Deliverables, Parts or
Products, e.g., adhesives, cleaning solvents or solutions, lubricants, water cooling solutions, and refrigerant gas.
Substances or Preparations used to operate a hardware Part or Product, and which is consumed during the
operation of the Part or Product and/or must be periodically replaced to maintain the Part or Product. Examples include toner, toner cartridges, ink, and ribbon cartridges.
Substances or Preparations contained in a Part, Product, or assembly which is not normally consumed but may
require replacement of the chemical to maintain operation of a Part, Product or assembly. Examples include refrigerants, lubricants, biocides, or corrosion inhibitors in a closed looped water cooling system.
The individual container or individual protective packaging of the Substance, Preparation, Field Use Material, or Chemical Product Supply must be labeled with:
The chemical name as it appears on the associated Material Safety Data Sheet(s), The name and address of the appropriate chemical manufacturer, Supplier or other responsible party, (in some
cases, IBM may designate the responsible party), and
Appropriate hazard warnings as applicable.
The label must be provided in English at a minimum. The label must have text in other languages and format as required by law or regulation in countries outside the U.S. For example, the label must meet requirements for content, format, and language translation for the EU Classification, Labeling, and Packaging Regulation. In some cases, IBM may specify the label and its contents.
A Safety Data Sheet (SDS) must be supplied to the IBM procurement representative or other IBM designated representative. The SDS must be provided in English at a minimum and comply with legal requirements for information content and format. For example, SDSs must be provided which meet the requirements of the EU REACH Regulation for format, content, and language translation. The SDS may be required in other languages and
PN 46G3772 Page 24 of 197 EC J85151 13MAY05
EC 899569 04NOV93 EC G32590 08FEB06
EC 899773 07DEC94 EC L04925B 11JAN07
EC F15040 25AUG97 EC L04925M 01AUG07
EC F73298 02SEP99 EC L04925N 19FEB08
EC F74336 05SEP00 EC L05962X 08AUG08
EC F72950 23JAN02 EC L79598 25FEB09
EC H64064 13MAY03 EC N24534E 02OCT09
EC H17205 29JUL03 EC L79598A 22FEB10
EC L79598B 22SEPT10
EC L79598C 27APR2011
EC L79598D 6SEPT2011
EC N31517Y 26MAR2012
ECN31946T 19APR2013
ECN33076 5DEC2013
ECN33076A 16MAY2014
ECN46883 17OCT2014
ECP02692 26MAY2015
ECO P02838 15OCT2015
ECOP17505 21APR2016
ECO P17633 1OCT2016
ECOP17764 20MAR2017
ECOP17905 16OCT2017
ECOP17958 Jan 25, 2018
ECOP44540 June 11, 2018
ECOP44680 Mar 5, 2019
ECOP44794 Aug 9, 2019
ECO P44877 15Feb2020
ECO P45188 1Sept2020
ECO P45272 9Mar2021
ECO P45379 18Oct2021
ECO 45443 4April2022
ECO P45475 14Nov2022
This document is the property of IBM. Its use is authorized only for responding to a request for quotation or for the performance of work for IBM. All questions must be referred to the IBM Procurement Department requesting the quotation or performance of work.
Engineering Specification
Page 25 of 197
formats as required by law or regulation in countries outside the U.S. The Supplier shall work with the appropriate IBM chemical representative through the IBM procurement representative to ensure proper format, information content, and translation requirements. In some cases, IBM may specify the language and format of an SDS. Full chemical disclosure for all Substances and Preparations is required.
Substances, Mixtures, Preparations, Field Use Materials, and Chemical Product Supplies must comply with chemical registration and premanufacture notification requirements in countries which require this type of notification in order to permit import, export, and sale of the Deliverable in that country.
The following are prohibited in Substances, Mixtures, Preparations, Field Use Materials, and Chemical Product Supplies. The applicable restriction is listed in the column entitled "Details of Restriction." The cited regulation can be found after Table 1.
Table 2. Prohibited in Substances, Mixtures, Preparations, Field Use Materials, and Chemical Product Supplies
Substance
4-aminobiphenyl xenylamine and its salts (e.g., CAS 92-67-1, 2113-61-3) Benzene (CAS 71-43-2)
2-Butoxyethanol (CAS 111-76-2)
Chlorinated Solvents (see specific list in Annex Q)
Cyclohexane (CAS 110-82-7)
Dichloromethane (Methylene chloride) (CAS 75-09-2)
Ethylene based glycol ethers (Annex GG)
Formaldehyde (CAS 50-00-0)
Hazardous chemicals subject to export notification, chemicals qualifying for Prior Informed Consent (PIC) notification, and/ or chemicals subject to the PIC procedure. Chemical list located at http://eurlex.europa.eu/LexUriServ/LexUriServ.do?uri= OJ:L:2012:201:0060:0106:en:PDF (and all follow-on amendments) Isopropyl alcohol (CAS 67-63-0)
Methylenediphenyl diisocyanate (MDI) (Annex PP) 78-872-naphthylamine and its salts (e.g., CAS 91-59-8, 553-00-4, 612-52-2)
Details of Restriction
Prohibited from use in concentrations equal to or greater than 0.1% by mass in Substances or Preparations. Prohibited in concentrations equal to or greater than 0.1% by mass in Substances or Preparations. Prohibited in paint stripper or thinner at 0.5 % (w/w). Prohibited in aerosol cleaners at 5 % (w/w). Prohibited in non-aerosol cleaners at 6 % (w/w). Prohibited in aerosol paint and coating at 0.1% (w/w). Prohibited in nonaerosol paint or coating at 0.5% (w/w). Prohibited in concentrations equal to or greater than 0.1% by weight in Substances and Preparations. Prohibited in Chemicals. Prohibited as a constituent of neoprene-based contact adhesives in concentrations equal to or greater than 0.1% by weight in package sizes greater than 350 g. If the package size is less than 350 g, then the package must be labeled in accordance to the EU REACH Regulation. Prohibited in Substances, Mixtures, Preparations, Field Use Materials, and Chemical Product Supplies. Prohibited in paint strippers in a concentration of 0.1% or more by mass. Prohibited in Field Use Materials and Chemical Product Supplies. Mixtures or solutions composed of greater than 0.1% formaldehyde are prohibited. Prohibited.
Prohibited in concentrations above 75% volatile organic compounds content in electronic cleaners. This includes cleaning wipes. Prohibited as a constituent in a Mixture in concentrations equal to or greater than 0.1% by weight. Prohibited in concentrations equal to or greater than 0.1% by weight in Substances and Preparations.
Example legal citations (See Table 1)
1, 2, 12, 40 1, 2, 12, 40 34
1, 2, 12 40 1, 2
IBM requirement, 28 1, 2 IBM requirement 25 40
46, 56 1 1, 2, 12, 40
PN 46G3772 Page 25 of 197 EC J85151 13MAY05
EC 899569 04NOV93 EC G32590 08FEB06
EC 899773 07DEC94 EC L04925B 11JAN07
EC F15040 25AUG97 EC L04925M 01AUG07
EC F73298 02SEP99 EC L04925N 19FEB08
EC F74336 05SEP00 EC L05962X 08AUG08
EC F72950 23JAN02 EC L79598 25FEB09
EC H64064 13MAY03 EC N24534E 02OCT09
EC H17205 29JUL03 EC L79598A 22FEB10
EC L79598B 22SEPT10
EC L79598C 27APR2011
EC L79598D 6SEPT2011
EC N31517Y 26MAR2012
ECN31946T 19APR2013
ECN33076 5DEC2013
ECN33076A 16MAY2014
ECN46883 17OCT2014
ECP02692 26MAY2015
ECO P02838 15OCT2015
ECOP17505 21APR2016
ECO P17633 1OCT2016
ECOP17764 20MAR2017
ECOP17905 16OCT2017
ECOP17958 Jan 25, 2018
ECOP44540 June 11, 2018
ECOP44680 Mar 5, 2019
ECOP44794 Aug 9, 2019
ECO P44877 15Feb2020
ECO P45188 1Sept2020
ECO P45272 9Mar2021
ECO P45379 18Oct2021
ECO 45443 4April2022
ECO P45475 14Nov2022
This document is the property of IBM. Its use is authorized only for responding to a request for quotation or for the performance of work for IBM. All questions must be referred to the IBM Procurement Department requesting the quotation or performance of work.
Engineering Specification
Page 26 of 197
Table 2. Prohibited in Substances, Mixtures, Preparations, Field Use Materials, and Chemical Product Supplies
Substance 4-nitrobiphenyl (CAS 92 -93-3) Nonylphenols (Annex RR)
Details of Restriction
Prohibited in concentrations equal to or greater than 0.1% by mass in Substances or Preparations. Prohibited in Substances and Preparations
Example legal citations (See Table 1)
1, 2, 12, 40
40
Per- and polyfluoroalkyl substances (PFAS) and PFAS-related substances with 5 or more carbon atoms in a perfluorinated carbon chain are banned. (e.g., CnF2n, n 5; or CF3CnF2n , n4). PFAS is defined as fluorinated substances that contain at least one fully fluorinated methyl or methylene carbon atom (without any H/Cl/Br/I atom attached to it), i.e. with a few noted exceptions, any chemical with at least a perfluorinated methyl group (CF3) or a perfluorinated methylene group (CF2) is a
Prohibited in Field Use Materials and Chemical Product Supplies
IBM requirement, 2, 10, 40
PFAS. For a list of possible CAS numbers refer OECD Comprehensive Database of Perand polyfluoroalkyl substances http://www.oecd.org/chemicalsafety/riskmanagement/global-database-of-per-andpolyfluoroalkyl-substances.xlsx Per- and polyfluoroalkyl substances (PFAS) and PFAS-related substance with 4 or less carbon atoms in a perfluorinated carbon chain are restricted (e.g., CnF2n, n 4; or CF3CnF2n , n3) For a list of possible CAS numbers refer OECD Comprehensive Database of Per- and polyfluoroalkyl substances http://www.oecd.org/chemicalsafety/riskmanagement/global-database-of-per-andpolyfluoroalkyl-substances.xlsx
Substances subject to REACH Authorization found in Annex XIV of REACH regulation and amendments (Annex OO in this specification lists current authorized substances as of date of this specification) Substances which are classified (in Part 3 of Annex VI to EU Regulation 1272/2008 on Classification, Labeling, and Packaging of Substances and Mixtures) as: i)Carcinogen Category 1A or 1B or carcinogen category 1 or 2; ii)Germ cell mutagen category 1A or 1B or mutagen category 1 or 2; iii)Toxic to reproduction category 1A or 1B or toxic to reproduction category 1 or 2. For more information about this restriction see EU REACH Regulation Annex XVII and all amendments.
(Note: See Table 1 for additional prohibited usages of PFOS and PFOA) Restricted in Field Use Materials and Chemical Product Supplies
(Note: See Table 1 for additional prohibited usages of PFOS and PFOA) Prohibited in Substances, constituents of Substances, Preparations or in Mixtures.
Prohibited in Substances, constituents of Substances, or in Mixtures.
IBM Requirement
1 1, 2
PN 46G3772 Page 26 of 197 EC J85151 13MAY05
EC 899569 04NOV93 EC G32590 08FEB06
EC 899773 07DEC94 EC L04925B 11JAN07
EC F15040 25AUG97 EC L04925M 01AUG07
EC F73298 02SEP99 EC L04925N 19FEB08
EC F74336 05SEP00 EC L05962X 08AUG08
EC F72950 23JAN02 EC L79598 25FEB09
EC H64064 13MAY03 EC N24534E 02OCT09
EC H17205 29JUL03 EC L79598A 22FEB10
EC L79598B 22SEPT10
EC L79598C 27APR2011
EC L79598D 6SEPT2011
EC N31517Y 26MAR2012
ECN31946T 19APR2013
ECN33076 5DEC2013
ECN33076A 16MAY2014
ECN46883 17OCT2014
ECP02692 26MAY2015
ECO P02838 15OCT2015
ECOP17505 21APR2016
ECO P17633 1OCT2016
ECOP17764 20MAR2017
ECOP17905 16OCT2017
ECOP17958 Jan 25, 2018
ECOP44540 June 11, 2018
ECOP44680 Mar 5, 2019
ECOP44794 Aug 9, 2019
ECO P44877 15Feb2020
ECO P45188 1Sept2020
ECO P45272 9Mar2021
ECO P45379 18Oct2021
ECO 45443 4April2022
ECO P45475 14Nov2022
This document is the property of IBM. Its use is authorized only for responding to a request for quotation or for the performance of work for IBM. All questions must be referred to the IBM Procurement Department requesting the quotation or performance of work.
Engineering Specification
Page 27 of 197
Table 2. Prohibited in Substances, Mixtures, Preparations, Field Use Materials, and Chemical Product Supplies
Substance
Substances with nanoparticle status (intentionally manufactured on a nanometric scale and containing particles, unbound or as an aggregate or agglomerate, of which a minimum proportion, in the number sizes distribution, has one or more external dimensions in the size range 1 nm and 100 nm); Substance produced in nanoparticular state: a substance containing particles, in an unbound state or as an aggregate or as an agglomerate and where, for 50 % or more of the particles in the number size distribution, one or more external dimensions is in the size range of one nanometer to one hundred nanometers, with the exception of natural, non-chemically modified substances and the substances of which the fraction between one nanometer and one hundred nanometers is a by-product of human activity. Fullerenes, graphene flakes and single wall carbon nanotubes with one or more external dimensions below one nanometer shall be deemed to be substances produced in nanoparticular state. Tetrachloroethylene (perchloroethylene) CAS 127-18-4
Tetraethyl lead (CAS 78-00-2)
Details of Restriction Prohibited in Field Use Materials, Substances, Mixtures, Preparations, and Chemical Products
Prohibited in Field Use Materials, Substances, Mixture, Preparations, and Chemical Product Supplies, including but not limited to adhesives, paints, and cleaning agents. Prohibited in Substances and Preparations
Example legal citations (See Table 1)
38, 48
IBM requirement, 10, 28 40
Tetramethyl lead (CAS 75-74-1)
Prohibited in Substances and Preparations
40
Toluene (CAS 108-88-3) Tributyl tin oxide (TBTO) (Annex S) Trichlorobenzene (CAS 120-82-1)
Trichloroethylene (CAS 79-01-6) 2,4,6-Tri-tert-butylphenol (CAS 732-26-3)
Prohibited as a Substance or in Mixtures in concentrations equal to or greater than 0.1% by mass in adhesives and spray paints. Spray paint includes paint designed or intended to be sprayed on. Prohibited in Field Use Materials, Substances, Preparations, Mixtures, and Chemical Product Supplies. Prohibited as a Substance or in Mixtures in concentrations equal to or greater than 0.1% by weight. Exemptions allowed: as intermediate of synthesis, process solvent in closed chemical applications for chlorination reactions and manufacture of TATB. See EU Regulation for details. Prohibited in Chemicals. Prohibited in Substances, Mixtures, Preparations, Field Use Materials, and Chemical Product Supplies, including but not limited to adhesives, paints, and cleaning agents. Prohibited in lubricating oils.
1, 2
10, 40 1, 2
40 IBM requirement, 10, 28 10
Vinyl chloride (CAS 75-01-4)
Prohibited in aerosol dispensers
1, 2
Chemicals regulated by transportation regulations must be packaged and labeled according to IBM Engineering Specification P/N 92F6933 "Packaging Requirements for Dangerous Goods." Contact the IBM Hazardous Materials Transportation Coordinator for more details on packaging requirements.
PN 46G3772 Page 27 of 197 EC J85151 13MAY05
EC 899569 04NOV93 EC G32590 08FEB06
EC 899773 07DEC94 EC L04925B 11JAN07
EC F15040 25AUG97 EC L04925M 01AUG07
EC F73298 02SEP99 EC L04925N 19FEB08
EC F74336 05SEP00 EC L05962X 08AUG08
EC F72950 23JAN02 EC L79598 25FEB09
EC H64064 13MAY03 EC N24534E 02OCT09
EC H17205 29JUL03 EC L79598A 22FEB10
EC L79598B 22SEPT10
EC L79598C 27APR2011
EC L79598D 6SEPT2011
EC N31517Y 26MAR2012
ECN31946T 19APR2013
ECN33076 5DEC2013
ECN33076A 16MAY2014
ECN46883 17OCT2014
ECP02692 26MAY2015
ECO P02838 15OCT2015
ECOP17505 21APR2016
ECO P17633 1OCT2016
ECOP17764 20MAR2017
ECOP17905 16OCT2017
ECOP17958 Jan 25, 2018
ECOP44540 June 11, 2018
ECOP44680 Mar 5, 2019
ECOP44794 Aug 9, 2019
ECO P44877 15Feb2020
ECO P45188 1Sept2020
ECO P45272 9Mar2021
ECO P45379 18Oct2021
ECO 45443 4April2022
ECO P45475 14Nov2022
This document is the property of IBM. Its use is authorized only for responding to a request for quotation or for the performance of work for IBM. All questions must be referred to the IBM Procurement Department requesting the quotation or performance of work.
Engineering Specification
Page 28 of 197
2.2 Product Content Declarations
IBM documents the presence of certain categories of substances in Deliverables to meet regulatory reporting requirements and customer requirements for Product content disclosures. Suppliers are required to complete a Product Content Declaration (PCD), IBM Part Number 46C3484, for Deliverables sold to IBM. Some parts, commodities and Products, such as batteries, cables, connectors, Medical Devices, Monitoring and Control instruments, and Vendor Logo Products may require additional information. The PCDs must be completed and forwarded to IBM upon request or by the submission deadline indicated by an IBM Procurement representative or IBM contracted vendor. IBM Procurement or vendor will supply details for completion of the declaration. Suppliers are required to keep documentation and/or test data that demonstrates procedures and actions taken by the supplier and the results to verify compliance of the Deliverable for 10 years from the end of production and make available to IBM upon request. This includes documentation and data maintained by the supplier from their respective supply chain and supplier's own records on the material content of the product. See Section 2.14 for additional documentation requirements. The IBM PCD is routinely updated to reflect new legal regulations and requirements. It is necessary for the IBM Supply Chain to resubmit an updated PCD upon request or if the part or product supplied to IBM is impacted by a new reporting requirement and the information on the PCD needs to be updated. The latest release of the PCD can be found at: https://www.ibm.com/ibm/environment/products/ecpquest.shtml.
If and when a supplier states on a PCD or Full Material Disclosure that the substances that make up a material is proprietary, the supplier is required to declare on the PCD or Full Material Disclosure any regulated substances contained within the proprietary material. (i.e., If a proprietary material contains a restricted, RoHS, REACH or reportable substance, then that substance, as regulated, must be declared on the PCD and/or the Full Material Disclosure.)
When laboratory sampling is completed for testing the RoHS substances in Table 3, the test method must be in accordance with the latest version of IEC 62321 Electrotechnical products - Determination of levels of six regulated substances (lead, mercury, cadmium, hexavalent chromium, polybrominated biphenyls, polybrominated diphenyl ethers) as referred to in EN IEC 63000:2018 Technical Documentation for the Assessment of Electrical and Electronic Products with Respect to the Restriction of Hazardous Substances (IEC 63000:2016).
2.2.1 RoHS Reporting
For certain markets and products, the presence of RoHS substances in Deliverables must be quantified and reported (e.g., California Electronic Waste Recycling Act). To meet this and other reporting obligations and requests, IBM requires that RoHS substances in the Supplier's Deliverables must be quantified and reported to IBM when such substances are present in permissible applications (such permissible applications do not include those listed in Table 1) and when they exceed the concentrations listed in Table 3 in any Homogeneous Materials. If the Supplier determines that substances in Table 3 are present above their respective specified thresholds, then the absolute weight in grams of the substance (e.g., cadmium) present in the Deliverable shall be reported to IBM. Absolute weights, rather than weight percentages or ppm, shall be reported. Suppliers shall contact their IBM representative to verify the reporting process for material content (e.g., declaration) data. PCDs are available at https://www.ibm.com/procurement/ossi, and https://www.ibm.com/ibm/environment/products/ecpquest.shtml
Table 3. Thresholds for reporting of RoHS substances
RoHS substance
Cadmium use in plating and surface coating applications. Cadmium, all applications except plating and surface coating applications. Hexavalent chromium (CrVI) ** Lead ***
Maximum Threshold for reporting in non-restricted applications* (ppm of the substance in any Homogeneous Material ) Any detectable level must be reported. * 100
1,000 1,000
PN 46G3772 Page 28 of 197 EC J85151 13MAY05
EC 899569 04NOV93 EC G32590 08FEB06
EC 899773 07DEC94 EC L04925B 11JAN07
EC F15040 25AUG97 EC L04925M 01AUG07
EC F73298 02SEP99 EC L04925N 19FEB08
EC F74336 05SEP00 EC L05962X 08AUG08
EC F72950 23JAN02 EC L79598 25FEB09
EC H64064 13MAY03 EC N24534E 02OCT09
EC H17205 29JUL03 EC L79598A 22FEB10
EC L79598B 22SEPT10
EC L79598C 27APR2011
EC L79598D 6SEPT2011
EC N31517Y 26MAR2012
ECN31946T 19APR2013
ECN33076 5DEC2013
ECN33076A 16MAY2014
ECN46883 17OCT2014
ECP02692 26MAY2015
ECO P02838 15OCT2015
ECOP17505 21APR2016
ECO P17633 1OCT2016
ECOP17764 20MAR2017
ECOP17905 16OCT2017
ECOP17958 Jan 25, 2018
ECOP44540 June 11, 2018
ECOP44680 Mar 5, 2019
ECOP44794 Aug 9, 2019
ECO P44877 15Feb2020
ECO P45188 1Sept2020
ECO P45272 9Mar2021
ECO P45379 18Oct2021
ECO 45443 4April2022
ECO P45475 14Nov2022
This document is the property of IBM. Its use is authorized only for responding to a request for quotation or for the performance of work for IBM. All questions must be referred to the IBM Procurement Department requesting the quotation or performance of work.
Engineering Specification
Page 29 of 197
Table 3. Thresholds for reporting of RoHS substances
RoHS substance
Mercury
Polybrominated biphenyl (PBB) flame retardants Polybrominated diphenyl ether (PBDE) flame retardants. Note this reporting category includes Deca BDE. Bis (2-ethylhexyl) phthalate (DEHP)*****
Maximum Threshold for reporting in non-restricted applications* (ppm of the substance in any Homogeneous Material ) Any detectable level must be reported, except unavoidable impurities at levels below 10ppm. Any detectable level must be reported. **** Any detectable level must be reported. ****
1,000
Butyl benzyl phthalate (BBP) *****
1,000
Dibutyl phthalate (DBP) *****
1,000
Diisobutyl phthalate (DIBP) *****
1,000
* Restricted applications are defined in Table 1. Concentrations of these substances above the levels referenced in Table 1 are prohibited. ** IBM prohibits intentional addition of hexavalent chromium in paints and plastic resins. See Table 1. For EU RoHS requirements, see specifications 53P6233 or 97P3864. These two IBM EU RoHS specifications ban the use of hexavalent chromium and compounds in finishing processes for sheet steel, aluminized, electroless nickel and die cast parts, fasteners and heatsinks. Hexavalent chromium and its compounds must not be used prior to painting or in other surface treatments for metal parts. These two RoHS specifications apply to Deliverables where the specifications are cited on the print, contract, Statement of Work or other procurement documentation. *** There are restrictions for lead use at levels lower than 1000ppm. See Table 1 for details. ****While listed here for completeness of the list of RoHS substances, PBB and PBDE flame retardants are banned by IBM per Section 2.1.1 and Table 1 of this specification. There are no permissible applications which can be reported. ***** While listed here for completeness of the list of RoHS substances, Table 1 has more restrictive levels for these 4 phthalates than the levels cited on this table.
2.2.2 Other Reportable Substances
IBM requires additional substances be quantified and reported by Suppliers if they are present in a Supplier's Deliverables at concentrations greater than the specified thresholds per Table 4 in any individual part in the Deliverable supplied to IBM. If the Supplier determines that substances in Table 4 are present in any constituent parts of the Deliverable above their respective specified thresholds, then the absolute weight in grams of the substance present in each part of the Deliverable supplied to IBM shall be reported to IBM. Absolute weights, rather than weight percentages or ppm, shall be reported to allow aggregation of the data with that from other parts in other Deliverables that comprise a final Product. Please note, the underlined text above emphasizes the need to report on the PCD substances and their weights present in the Deliverable to IBM, which may be different from the weight of the substances in the raw material used.
For example, if the Deliverable supplied to IBM is a power supply, then the substances in Table 4 should be reported to IBM if they occur above the specified thresholds in any of the constituent parts of the power supply. Example #1: If a device or part in a power supply contains a tin-antimony solder and the concentration of antimony is above the threshold limit of 1000 ppm in the device or part, then the total weight of the antimony must be reported on the PCD for the power supply. Example #2: If antimony trioxide is used as part of the flame-retardant system of several devices and plastic components in a power supply and the amount of antimony trioxide is above 1000 ppm in its respective homogeneous material (e.g., resin), then the weight of antimony trioxide used in each material in the power supply must be totaled and stated on the PCD.
Note: for products qualifying for the EPEAT Standard for Computer Servers, the test methodology in IEC 62321-31 and IEC 62321-3-2 should be used to determine the bromine and chlorine levels if the product contains any plastic parts exceeding 25 grams with greater than 1000 ppm chlorine or greater than 1000 ppm bromine.
Suppliers shall contact their IBM representative to verify the reporting process for material content data. PCDs are available at the https://www.ibm.com/procurement/ossi or https://www.ibm.com/ibm/environment/products/ecpquest.shtml.
PN 46G3772 Page 29 of 197 EC J85151 13MAY05
EC 899569 04NOV93 EC G32590 08FEB06
EC 899773 07DEC94 EC L04925B 11JAN07
EC F15040 25AUG97 EC L04925M 01AUG07
EC F73298 02SEP99 EC L04925N 19FEB08
EC F74336 05SEP00 EC L05962X 08AUG08
EC F72950 23JAN02 EC L79598 25FEB09
EC H64064 13MAY03 EC N24534E 02OCT09
EC H17205 29JUL03 EC L79598A 22FEB10
EC L79598B 22SEPT10
EC L79598C 27APR2011
EC L79598D 6SEPT2011
EC N31517Y 26MAR2012
ECN31946T 19APR2013
ECN33076 5DEC2013
ECN33076A 16MAY2014
ECN46883 17OCT2014
ECP02692 26MAY2015
ECO P02838 15OCT2015
ECOP17505 21APR2016
ECO P17633 1OCT2016
ECOP17764 20MAR2017
ECOP17905 16OCT2017
ECOP17958 Jan 25, 2018
ECOP44540 June 11, 2018
ECOP44680 Mar 5, 2019
ECOP44794 Aug 9, 2019
ECO P44877 15Feb2020
ECO P45188 1Sept2020
ECO P45272 9Mar2021
ECO P45379 18Oct2021
ECO 45443 4April2022
ECO P45475 14Nov2022
This document is the property of IBM. Its use is authorized only for responding to a request for quotation or for the performance of work for IBM. All questions must be referred to the IBM Procurement Department requesting the quotation or performance of work.
Engineering Specification
Page 30 of 197
Table 4a. Other Reporting Requirements - Substances
Reportable Substance
Antimony/Antimony Compounds (Annex T) Please note antimony trioxide should not be reported in this category, antimony trioxide has a separate entry on this table.
Threshold for Reporting is at the Examples of Industry Uses / Comments
"Part" level unless otherwise noted
1000 ppm (0.1%)
Solder alloy, CRT glass, Any application
Antimony trioxide (CAS 1309-64-4)
Arsenic/Arsenic Compounds (Annex U) Please note some applications of arsenic are prohibited in Table 1 and reportable in Table 5 as an SVHC. Reporting here is for other applications and/or concentrations.
1000 ppm (0.1%) in a homogeneous material
1000 ppm (0.1%)
Flame retardant, e.g., in plastic housings and chip encapsulant. Often used in combination with brominated flame retardants. Opacifying agent for glass, ceramics and enamels, Pigments, Catalyst for polyethylene terephthalate and vulcanization of rubber. Dopant in semiconductor manufacture Gallium arsenide is used as semiconductor substrate.
Beryllium metal (CAS 7440-41-7) Please note, this substance should not be reported under the entry of Beryllium compounds in this Table but rather here in this entry. Beryllium Compounds (Annex V) Please note this entry does not include beryllium, beryllium oxide and beryllium copper alloys. These beryllium substances have their own entry for reporting on this table. Beryllium copper alloys. Please note, this substance should not be reported under the entry of Beryllium compounds in this Table but rather here in this entry. Beryllium oxide (CAS 1304-56-9)
1000 ppm (0.1%) in a homogeneous material
200 ppm (0.02%)
1000 ppm (0.1%) in a homogeneous material 1000 ppm (0.1%)
Heat transport and heat sinking applications, gears, and cogs.
Substrate for integrated circuits, Lightweight housings.
Connectors Electrical contacts and springs
Insulator, Structural ceramic
Bis(2-ethylhexyl) tetrabromophthalate (TBPH or BEHTBP) (CAS 26040-51-7)
1000 ppm (0.1%) in a homogeneous Flame retardant in polyurethane foam,
material
Plasticizer for PVC, Adhesives
Bismuth/Bismuth Compounds (also alloys) (Annex W)
1000 ppm (0.1%)
Solder alloy
Bromine and Brominated Flame Retardants (other than PBBs, PBDEs or other brominated flame retardants specifically called out in this Table) in all applications except printed wiring board laminates. Please provide CAS #on the PCD. (Annex X) Brominated Flame Retardants (other than PBBs or PBDEs) in printed wiring board laminates. Please provide CAS # on the PCD.
1000 ppm (0.1%) in a homogeneous material
900 ppm (0.09%) in a homogeneous material in printed wiring board laminate
Flame retardant Flame retardant
PN 46G3772 Page 30 of 197 EC J85151 13MAY05
EC 899569 04NOV93 EC G32590 08FEB06
EC 899773 07DEC94 EC L04925B 11JAN07
EC F15040 25AUG97 EC L04925M 01AUG07
EC F73298 02SEP99 EC L04925N 19FEB08
EC F74336 05SEP00 EC L05962X 08AUG08
EC F72950 23JAN02 EC L79598 25FEB09
EC H64064 13MAY03 EC N24534E 02OCT09
EC H17205 29JUL03 EC L79598A 22FEB10
EC L79598B 22SEPT10
EC L79598C 27APR2011
EC L79598D 6SEPT2011
EC N31517Y 26MAR2012
ECN31946T 19APR2013
ECN33076 5DEC2013
ECN33076A 16MAY2014
ECN46883 17OCT2014
ECP02692 26MAY2015
ECO P02838 15OCT2015
ECOP17505 21APR2016
ECO P17633 1OCT2016
ECOP17764 20MAR2017
ECOP17905 16OCT2017
ECOP17958 Jan 25, 2018
ECOP44540 June 11, 2018
ECOP44680 Mar 5, 2019
ECOP44794 Aug 9, 2019
ECO P44877 15Feb2020
ECO P45188 1Sept2020
ECO P45272 9Mar2021
ECO P45379 18Oct2021
ECO 45443 4April2022
ECO P45475 14Nov2022
This document is the property of IBM. Its use is authorized only for responding to a request for quotation or for the performance of work for IBM. All questions must be referred to the IBM Procurement Department requesting the quotation or performance of work.
Engineering Specification
Page 31 of 197
Table 4a. Other Reporting Requirements - Substances
Reportable Substance 2-Butanone oxime (CAS 96-29-7)
Threshold for Reporting is at the "Part" level unless otherwise noted 1000 ppm (0.1%) in a homogeneous material
n-Butyl glycidyl ether (CAS 2426-08-6) 1000 ppm (0.1%) in a homogeneous material
Examples of Industry Uses / Comments
Paints, varnishes, stains and coatings Wood preservatives Adhesives, silicone sealants, printing inks Corrosion inhibitors Urethane polymers Epoxy resin formulations for coatings, adhesives, binders, sealants, fillers and resins
Chlorine and Chlorinated Flame Retardants in all applications except printed wiring board laminates (Please provide CAS # on the PCD.) Chlorinated Flame Retardants in printed wiring board laminates only (Please provide CAS number on the PCD.)
Cobalt dichloride (CAS 7646-79-9) Please note this substance is also listed in Table 5 for reporting. This entry requires reporting of a lower concentration level than Table 5. Cobalt (CAS 7440-48-4) and cobalt substances (not otherwise specified in this Table) Cobalt (CAS 7440-48-4) and cobalt substances in batteries (only report use of cobalt and cobalt substances in batteries for this entry). Cobalt sulfate (CAS 10124-43-3; 13455-64-0 monohydrate; 10026-24-1 heptahydrate) Critical Raw Materials (Annex YY)
Decabromodiphenyl ethane (DBDPE) (CAS 84852-53-9); synonyms e.g., Benzene, 1,1'-(1,2-ethanediyl)bis [2,3,4,5,6pentabromo-; Please note this substance is not to be included in the Brominated Flame-Retardant entry in this table, but rather as its own separate entry here. 2, 3-Dibromo-1-propanol (CAS 96-139) Please note, this substance should not be reported under the entry of Brominated Flame Retardants in this Table but rather here in this entry. Dibromoneopentyl glycol (CAS 329690-0) Please note this substance is not to be included in the Brominated Flame-Retardant entry in this table, but rather as its own separate entry here. P-Dichlorobenzene (CAS 106-46-7) Please note this substance has a restricted application in Table 1 under Halogenated aromatic substances and Annex D. Reporting for this table is for applications which are not restricted.
1000 ppm (0.1%) in a homogeneous material
900 ppm (0.09%) in a homogeneous material in printed wiring board laminate 1000 ppm (0.1%) in a homogeneous material
1000 ppm (0.1%) in a homogeneous material Any level of cobalt and cobalt substances
1000 ppm (0.1%) in a homogeneous material Any level of these raw materials must be reported Any level of DBDPE must be reported
1000 ppm (0.1%) in a homogeneous material
1000 ppm (0.1%) in a homogeneous material
1000 ppm (0.1%) in a homogeneous material
Flame retardant
Flame retardant
Cobalt plating and cobalt based pigments and drier compounds (desiccants). Pneumatic panels for indicating water contamination.
Electroplating, Lithium ion batteries, Any application, and lithium polymer batteries Batteries
Preparation of pigments for glass and porcelain, storage batteries, electroplating baths and sympathetic ink Semiconductors, Photovoltaic cells, alloys, and capacitors. Adhesives and sealants Plastic and rubber materials Polymers used for electronic and electrical applications
Flame retardant
Flame retardant in unsaturated polyester resins, in molded products, and in rigid polyurethane foam.
Precursor to the high-performance polymer poly (pphenylene sulfide). Disinfectant
PN 46G3772 Page 31 of 197 EC J85151 13MAY05
EC 899569 04NOV93 EC G32590 08FEB06
EC 899773 07DEC94 EC L04925B 11JAN07
EC F15040 25AUG97 EC L04925M 01AUG07
EC F73298 02SEP99 EC L04925N 19FEB08
EC F74336 05SEP00 EC L05962X 08AUG08
EC F72950 23JAN02 EC L79598 25FEB09
EC H64064 13MAY03 EC N24534E 02OCT09
EC H17205 29JUL03 EC L79598A 22FEB10
EC L79598B 22SEPT10
EC L79598C 27APR2011
EC L79598D 6SEPT2011
EC N31517Y 26MAR2012
ECN31946T 19APR2013
ECN33076 5DEC2013
ECN33076A 16MAY2014
ECN46883 17OCT2014
ECP02692 26MAY2015
ECO P02838 15OCT2015
ECOP17505 21APR2016
ECO P17633 1OCT2016
ECOP17764 20MAR2017
ECOP17905 16OCT2017
ECOP17958 Jan 25, 2018
ECOP44540 June 11, 2018
ECOP44680 Mar 5, 2019
ECOP44794 Aug 9, 2019
ECO P44877 15Feb2020
ECO P45188 1Sept2020
ECO P45272 9Mar2021
ECO P45379 18Oct2021
ECO 45443 4April2022
ECO P45475 14Nov2022
This document is the property of IBM. Its use is authorized only for responding to a request for quotation or for the performance of work for IBM. All questions must be referred to the IBM Procurement Department requesting the quotation or performance of work.
Engineering Specification
Page 32 of 197
Table 4a. Other Reporting Requirements - Substances
Reportable Substance
Diethyl phthalate (DEP) (CAS 84-662). Please note this phthalate compound should not be reported in the general phthalate category in this table, but rather here in this entry. Diisodecyl phthalate (DIDP) (CAS 26761-40-0 and 68515-49-1) Please note this phthalate compound should not be reported in the general phthalate category in this table, but rather here in this entry. Diisononyl phthalate (DINP) (CAS 28553-12-0 and 68515-48-0) Please note this phthalate compound should not be reported in the general phthalate category in this table, but rather here in this entry. Di-n-hexyl phthalate (DNHP) (CAS 8475-3) Please note this phthalate compound should not be reported in the general phthalate category in this table and is also reportable in Table 5 as a REACH SVHC when present at or above 0.1% by weight. Di-n-octyl phthalate (DnOP) (CAS 11784-0) Please note this phthalate compound should not be reported in the general phthalate category in this table. Di-n-pentyl phthalate (DnPP) (CAS 131-18-0) Please note this phthalate compound should not be reported in the general phthalate category in this table. Dioctyltin (DOT) compounds (e.g., dioctyltin oxide CAS 870-08-6 and dioctyltin dilaurate CAS 3648-18-8) Please note Table 1 prohibits DOT in some applications. This entry is for reporting of all other non-restricted applications. 1,6,7,8,9,14,15,16,17,17,18,18Dodecachloropentacyclo [12.2.1.16,9.02,13.05,10] octadeca7,15-diene ("Dechlorane Plus"TM) [covering any of its individual anti- and syn-isomers or any combination thereof] (CAS 13560-89-9) Dysprosium (CAS 7429-91-6) and compounds 2-Ethylhexyl-2,3,4,5tetrabromobenzoate (TBB) (CAS 183658-27-7) Please note TBB is not to be included in the Brominated Flame-Retardant entry in this table, but rather as its own separate entry here. Formaldehyde (CAS 50-00-0) Please note this substance has prohibited applications listed in Table 1. This entry is for reporting of all other non-restricted applications.
Threshold for Reporting is at the "Part" level unless otherwise noted 1000 ppm (0.1%) in a homogeneous material
1000 ppm (0.1%) in a homogeneous material
1000 ppm (0.1%) in a homogeneous material
1000 ppm (0.1%) in a homogeneous material
1000 ppm (0.1%) in a homogeneous material
1000 ppm (0.1%) in a homogeneous material
Reportable in Articles where the concentration in the Article, or a part thereof, is greater than 0.1% by weight of tin.
Any level of this substance must be reported
1000 ppm (0.1%) in a homogeneous material 1000 ppm (0.1%) in a homogeneous material
1000 ppm (0.1%) in a homogeneous material
Examples of Industry Uses / Comments Plasticizer
Plasticizer (e.g., for PVC) Paints, sealing compounds, and textile inks Plasticizer (e.g., for PVC)
Plasticizer
Constituent of phthalate mixtures
Plasticizer
Textiles Vulcanization molding kits
Non-plasticizing flame retardant in nylon, PBT, PP, ABS, Epoxy, and PVC. Adhesives, sealants and binding agents.
Magnets, lasers, and hard disk drives, Flame retardant in polyurethane foam
Wood Textiles
PN 46G3772 Page 32 of 197 EC J85151 13MAY05
EC 899569 04NOV93 EC G32590 08FEB06
EC 899773 07DEC94 EC L04925B 11JAN07
EC F15040 25AUG97 EC L04925M 01AUG07
EC F73298 02SEP99 EC L04925N 19FEB08
EC F74336 05SEP00 EC L05962X 08AUG08
EC F72950 23JAN02 EC L79598 25FEB09
EC H64064 13MAY03 EC N24534E 02OCT09
EC H17205 29JUL03 EC L79598A 22FEB10
EC L79598B 22SEPT10
EC L79598C 27APR2011
EC L79598D 6SEPT2011
EC N31517Y 26MAR2012
ECN31946T 19APR2013
ECN33076 5DEC2013
ECN33076A 16MAY2014
ECN46883 17OCT2014
ECP02692 26MAY2015
ECO P02838 15OCT2015
ECOP17505 21APR2016
ECO P17633 1OCT2016
ECOP17764 20MAR2017
ECOP17905 16OCT2017
ECOP17958 Jan 25, 2018
ECOP44540 June 11, 2018
ECOP44680 Mar 5, 2019
ECOP44794 Aug 9, 2019
ECO P44877 15Feb2020
ECO P45188 1Sept2020
ECO P45272 9Mar2021
ECO P45379 18Oct2021
ECO 45443 4April2022
ECO P45475 14Nov2022
This document is the property of IBM. Its use is authorized only for responding to a request for quotation or for the performance of work for IBM. All questions must be referred to the IBM Procurement Department requesting the quotation or performance of work.
Engineering Specification
Page 33 of 197
Table 4a. Other Reporting Requirements - Substances
Reportable Substance
Hexabromocyclododecane (HBCDD), (e.g., CAS 25637-99-4, 3194-55-6, 134237-50-6, 134237-51-7, 134237-528.) Please note this substance has a restricted level listed in Table 1. This entry is for reporting at lower levels. n-Hexane (CAS 110-54-3)
Threshold for Reporting is at the "Part" level unless otherwise noted 50 ppm (0.005%) in a homogeneous material
1000 ppm (0.1%) in a homogeneous material
Indium phosphide (CAS 22398-80-7)
Lead/ Lead compounds Please note, lead /lead compound are restricted on Tables 1 and 3, this entry is for levels of lead below 1000 ppm in cables
Lead/ Lead compounds Please note, lead /lead compounds are restricted on Tables 1 and 3, this entry is for reporting of levels of lead in batteries only. Lead/ Lead compounds Please note, lead /lead compounds are restricted on Tables 1 and 3 and reportable for cables and batteries elsewhere on this table. This entry is for lead use in products or parts which are not in scope of EU RoHS. Long chain chlorinated paraffins (LCCP; generally, C 18-28) (also referred to as Long-chain chlorinated alkanes) Annex WW Magnesium/Magnesium Alloys and Magnesium compounds (Annex Y) Medium chain chlorinated paraffins (C 14-17 alkyl chain) (MCCPs) (e.g., CAS 85535-85-9) (also referred to as Mediumchain chlorinated alkanes) Neodymium (CAS 7440-00-8) and compounds in hard disk drives only.
Nickel sulfamate (CAS 13770-89-3)
Nickel sulphate CAS 7786-81-4 (anhydrous), 10101-97-0 (hexahydrate), 10101-98-1 (heptahydrate) N,N'-mixed phenyl and tolyl derivatives of 1,4-benzenediamine (CAS 68953-84-4) Organophosphate Compounds (Annex ZZ) Nonylphenols (Annex RR) (Note: Table 2 prohibits these substances in Preparations and Substances. This entry is for noting the presence in Articles.) Perchlorates (Annex MM)
1000 ppm (0.1%) in a homogeneous material 300ppm to 1000ppm in surface coating materials for cables/ cords with thermoset or thermoplastic coatings All batteries containing lead and/or lead compounds.
Lead and lead compounds used in parts or products that are not within scope of EU RoHS, e.g., non electrical equipment, such as mechanical tools.
1000 ppm (0.1%) in a homogeneous material
1000 ppm (0.1%)
1000 ppm (0.1%) in a homogeneous material
Any level of neodymium and compounds present in hard disk drives. 1000 ppm (0.1%) in a homogeneous material 1000 ppm (0.1%) in a homogeneous material
1000 ppm (0.1%) in a Deliverable
Any level of these aryl organophosphate compounds 1000 ppm (0.1%) in a homogeneous material
6ppb in a material
Examples of Industry Uses / Comments Flame retardant in extruded and expanded polystyrene and flexible polyurethane foam
Solvents in cleaning agents in the printing and textile industry. Glues for the leather industry. Quick-drying glues and rubber cement. Semiconductor Stabilizer
Lead acid batteries
Stabilizer, brass applications
Metal working applications Plasticizer, Leather, Paints and coatings Sealants, Rubber applications Surface coating, computer casings, hard disk drives and any application Flame retardant Plasticizer
Hard disk drives
Nickel plating Nickel plating
Additive in rubber.
Flame retardant Lubrication oil additive, Emulsifier Wetting and dispersing agent, Antistatic agent, Demulsifier and solubilizer Coin cell batteries, Acoustic foam
PN 46G3772 Page 33 of 197 EC J85151 13MAY05
EC 899569 04NOV93 EC G32590 08FEB06
EC 899773 07DEC94 EC L04925B 11JAN07
EC F15040 25AUG97 EC L04925M 01AUG07
EC F73298 02SEP99 EC L04925N 19FEB08
EC F74336 05SEP00 EC L05962X 08AUG08
EC F72950 23JAN02 EC L79598 25FEB09
EC H64064 13MAY03 EC N24534E 02OCT09
EC H17205 29JUL03 EC L79598A 22FEB10
EC L79598B 22SEPT10
EC L79598C 27APR2011
EC L79598D 6SEPT2011
EC N31517Y 26MAR2012
ECN31946T 19APR2013
ECN33076 5DEC2013
ECN33076A 16MAY2014
ECN46883 17OCT2014
ECP02692 26MAY2015
ECO P02838 15OCT2015
ECOP17505 21APR2016
ECO P17633 1OCT2016
ECOP17764 20MAR2017
ECOP17905 16OCT2017
ECOP17958 Jan 25, 2018
ECOP44540 June 11, 2018
ECOP44680 Mar 5, 2019
ECOP44794 Aug 9, 2019
ECO P44877 15Feb2020
ECO P45188 1Sept2020
ECO P45272 9Mar2021
ECO P45379 18Oct2021
ECO 45443 4April2022
ECO P45475 14Nov2022
This document is the property of IBM. Its use is authorized only for responding to a request for quotation or for the performance of work for IBM. All questions must be referred to the IBM Procurement Department requesting the quotation or performance of work.
Engineering Specification
Page 34 of 197
Table 4a. Other Reporting Requirements - Substances
Reportable Substance
Perfluoroalkyl substances or Polyfluoroalkyl substances (PFASs) which can include perflouroakyl sulfonates (PFAS) and Perfluoro carboxylic acid and related compounds (PFCAs). This includes PFASs which have at least 1 fully fluorinated carbon atom (moiety). For a list of potential CAS Numbers A see OECD Comprehensive Database of Per- and polyfluoroalkyl substances http://www.oecd.org/chemicalsafety/ris k-management/global-database-of-perand-polyfluoroalkyl-substances.xlsx. This entry is for reporting of all other nonrestricted. Please note: PFASs are defined as fluorinated substances that contain at least one fully fluorinated methyl or methylene carbon atom (without any H/Cl/Br/I atom attached to it), i.e. any chemical with at least one perfluorinated methyl group (-CF3 ) or at least one perfluorinated methylenegroup (-CF2 -), including branched fluoroalkyl groups and substances containing ether linkages, fluoropolymers and side chain fluorinated polymers. Note: some of these PFASs substances are restricted please refer to Table 1 and 2 for these specific restrictions
Threshold for Reporting is at the "Part" level unless otherwise noted Any Level -intentionally added or known to be present
Examples of Industry Uses / Comments
Water, oil and grease repellant Surfactant Spreading/ wetting agent. Semiconductor applications Flame retardant in resins
Please report any substance on the PCD which has at least one perfluorinated methyl group (-CF3 ). Phthalates (Annex AA) Please note several phthalates have separate entries on this Table and should not be included for reporting in this general phthalate category. Several phthalates are restricted, see Table 1. Polycyclic aromatic hydrocarbons (PAHs (Annex LL) Please note this substance grouping has prohibited applications listed in Table 1. This entry is for reporting of all other non-restricted applications or levels below the restricted amount. Polyvinyl chloride (PVC) (Annex BB)
Praseodymium (CAS 7440-10-0) and compounds Refractory Ceramic Fibers; Special Purpose Fibers, [Man-made vitreous (silicate) fibers with random orientation with alkaline oxide and alkali earth oxide (Na2O+K2O+CaO+ MgO+ BaO) (e.g., CAS 142844-00-6)
1000 ppm (0.1%)
1000 ppm (0.1%) in a homogeneous material
1000 ppm (0.1%) in a homogeneous material 1000 ppm (0.1%) in a homogeneous material Content less than or equal to 18% by weight
Plasticizer in plastics (e.g., PVC), PVC electrical cables, Solder paste, Sealants, varnishes, paper coating, inks, resins and adhesives.
Dyes, plastics, coal tars, and creosote.
Plastic, Insulator, Windows on cell phones Housings for IT equipment, Electrical cables, Flexible CD jackets Hard disk drives, lasers, colorant in glasses and enamels, and magnets Insulation material in high temperature applications
PN 46G3772 Page 34 of 197 EC J85151 13MAY05
EC 899569 04NOV93 EC G32590 08FEB06
EC 899773 07DEC94 EC L04925B 11JAN07
EC F15040 25AUG97 EC L04925M 01AUG07
EC F73298 02SEP99 EC L04925N 19FEB08
EC F74336 05SEP00 EC L05962X 08AUG08
EC F72950 23JAN02 EC L79598 25FEB09
EC H64064 13MAY03 EC N24534E 02OCT09
EC H17205 29JUL03 EC L79598A 22FEB10
EC L79598B 22SEPT10
EC L79598C 27APR2011
EC L79598D 6SEPT2011
EC N31517Y 26MAR2012
ECN31946T 19APR2013
ECN33076 5DEC2013
ECN33076A 16MAY2014
ECN46883 17OCT2014
ECP02692 26MAY2015
ECO P02838 15OCT2015
ECOP17505 21APR2016
ECO P17633 1OCT2016
ECOP17764 20MAR2017
ECOP17905 16OCT2017
ECOP17958 Jan 25, 2018
ECOP44540 June 11, 2018
ECOP44680 Mar 5, 2019
ECOP44794 Aug 9, 2019
ECO P44877 15Feb2020
ECO P45188 1Sept2020
ECO P45272 9Mar2021
ECO P45379 18Oct2021
ECO 45443 4April2022
ECO P45475 14Nov2022
This document is the property of IBM. Its use is authorized only for responding to a request for quotation or for the performance of work for IBM. All questions must be referred to the IBM Procurement Department requesting the quotation or performance of work.
Engineering Specification
Page 35 of 197
Table 4a. Other Reporting Requirements - Substances
Reportable Substance
Selenium/Selenium Compounds (Annex DD)
Threshold for Reporting is at the "Part" level unless otherwise noted 1000 ppm (0.1%)
Examples of Industry Uses / Comments
Diodes and light detectors (lead selenide) Historically used as photoelectric coating
Small brominated alkyl alcohols (Annex XX) Terbium (CAS 7440-27-9) and compounds Tetrabromobisphenol A (CAS 79-94-7) Please note TBBA is not to be included in the Brominated Flame-Retardant entry in this table, but rather as its own entry here. Tetrabutyltin (TTBT) (CAS 1461-25-2)
1000 ppm (0.1%)
1000 ppm (0.1%) in a homogeneous material 1000 ppm (0.1%) in a homogeneous material
In flame retardants, resins, epoxy resins, polyurethane foams. Hard disk drives, lasers, green phosphors, and magnets Flame retardant Epoxy resins in printed circuit boards
1000 ppm (0.1%) in a homogeneous Stabilizer for PVC material
Toluene (CAS 108-88-3)
Toluene Diisocyanates (see Annex UU for all-inclusive list of CAS numbers) Tributyltin (TBT) and tributyltin compounds (Annex EE) Please note this substance has restrictions in Table 1 under the entry for tri-substituted organostannic compounds. This reporting is for lower concentration levels. 1, 2, 3-Trichlorobenzene (CAS 87-616) Please note this entry has a prohibited application listed in Table 1 for Halogenated aromatic substances. This entry is for reporting of all other non-restricted uses. 1, 2, 4-Trichlorobenzene (CAS 120-821) Please note this entry has a prohibited application in Table 1 for Halogenated aromatic substances. This entry is for reporting of all other non-restricted uses. Triphenyltin (TPT) and triphenyltin compounds (Annex EE) Please note this substance has restrictions in Table 1 under the entry for "Tri-substituted organostannic compounds". This reporting is for lower concentration levels. Tris (1,3-dichloro-2-propyl) phosphate TDCPP (CAS 13674-87-8) Please note this substance has restrictions in Table 1. This reporting is only for cables, adaptors and other connecting devices, storage media such as compact discs, for interactive software, with the following exception this substance is prohibited in cables for mice and in all other product components. Tris (2-chloro-1-methylethyl) phosphate (TCPP) (CAS 13674-84-5) 2,4,6-tris(tert-butyl)phenol (2,4,6TTBP) (CAS 732263) Vinyl chloride (CAS 75-01-4)
1000 ppm (Please note in Table 2 toluene is prohibited as a Substance or constituent of Preparations in concentrations equal to or greater than 0.1% by mass in adhesives and spray paints.) 1000 ppm (0.1%) in a homogeneous material Any Intentional Addition in chemical products
1000 ppm (0.1%) in a homogeneous material
1000 ppm (0.1%) in a homogeneous material
Any Intentional Addition in chemical products
1000 ppm (0.1%) in a homogeneous material
1000 ppm (0.1%) in a homogeneous material 1000 ppm (0.1%) in a homogeneous material 1000 ppm (0.1%) in a homogeneous material
Adhesive Paints/varnishes Coatings Silicon sealants
Chemical intermediate in the production of polyurethane Antibacterial and antifungal agents, antifoulant Paint, pigment, and stabilizer
Solvent Dye carrier Heat transfer medium
Solvent, Dielectric fluid, Dye carrier Synthetic transformer oil, Lubricant Heat transfer medium Wood preservatives Antiseptic and antifungal agent Paint, pigment, and stabilizer
Flame retardant
Flame retardant, e.g., for polyurethane Antioxidant that can be used as a fuel additive or lubricant additive Chemical intermediate used in production of polyvinyl chloride
PN 46G3772 Page 35 of 197 EC J85151 13MAY05
EC 899569 04NOV93 EC G32590 08FEB06
EC 899773 07DEC94 EC L04925B 11JAN07
EC F15040 25AUG97 EC L04925M 01AUG07
EC F73298 02SEP99 EC L04925N 19FEB08
EC F74336 05SEP00 EC L05962X 08AUG08
EC F72950 23JAN02 EC L79598 25FEB09
EC H64064 13MAY03 EC N24534E 02OCT09
EC H17205 29JUL03 EC L79598A 22FEB10
EC L79598B 22SEPT10
EC L79598C 27APR2011
EC L79598D 6SEPT2011
EC N31517Y 26MAR2012
ECN31946T 19APR2013
ECN33076 5DEC2013
ECN33076A 16MAY2014
ECN46883 17OCT2014
ECP02692 26MAY2015
ECO P02838 15OCT2015
ECOP17505 21APR2016
ECO P17633 1OCT2016
ECOP17764 20MAR2017
ECOP17905 16OCT2017
ECOP17958 Jan 25, 2018
ECOP44540 June 11, 2018
ECOP44680 Mar 5, 2019
ECOP44794 Aug 9, 2019
ECO P44877 15Feb2020
ECO P45188 1Sept2020
ECO P45272 9Mar2021
ECO P45379 18Oct2021
ECO 45443 4April2022
ECO P45475 14Nov2022
This document is the property of IBM. Its use is authorized only for responding to a request for quotation or for the performance of work for IBM. All questions must be referred to the IBM Procurement Department requesting the quotation or performance of work.
Engineering Specification
Page 36 of 197
Table 4b. Other Reporting Requirements - Parts, Products, Components, Commodities
Reportable Parts, Products, Components, Commodities Gas discharge lamps, e.g., fluorescent lamps, mercury vapor lamps, metal halide lamps, sodium lamps, xenon lamp and other light sources where the light is created as a result of electrical-brush discharge and gas, vapor of metal or in a mixture of gas and vapor Postconsumer recycled material - Plastic (see definitions in Section 1.2)
Pressurized gas - components with pressurized gas which need special attention (pressure must be > 1.5 bar)
Reporting Requirements
Any gas discharge lamp must be reported.
Examples of Industry Uses / Comments
Fluorescent lamps, mercury vapor lamps, metal halide lamps, sodium lamps, xenon lamp
Report only the amount of postconsumer recycled material - plastic (not the amount of pre-consumer or new plastic) in grams for parts equal to or greater than 25 grams. Any part or product with pressurized gas meeting the definition.
Bezels, fillers, enclosure covers Refrigerant gas, power lifts, and pneumatics.
Recyclable Materials glass in Covered Electronic Devices only, e.g., monitors with a screen size greater than 4 inches (measured diagonally) with a liquid crystal display or cathode ray tube, as defined by California Electronic Waste Recycling Act Recyclable Materials metals in Covered Electronic Devices only, e.g., monitors with a screen size greater than 4 inches (measured diagonally) with a liquid crystal display or cathode ray tube, as defined by California Electronic Waste Recycling Act
Recyclable Materials plastics in Covered Electronic Devices only, e.g., monitors with a screen size greater than 4 inches (measured diagonally) with a liquid crystal display or cathode ray tube, as defined by California Electronic Waste Recycling Act Springs - mechanical components that store mechanical energy (e.g., springs) which need special attention (diameter must be >10 mm and height >25 mm or proportionally similar volume). Special attention means that the spring may cause physical harm during disassembly of the product.
Report the amount of glass (in grams) in a Covered Electronic Devices which are recyclable.
Report the amount of metals (in grams) in a Covered Electronic Devices which are recyclable.
Report the amount of plastics (in grams) in a Covered Electronic Devices which are recyclable.
Location of any spring meeting the definition.
In Covered Electronic Devices, as defined by the California Electronic Waste Recycling Act: http://www.dtsc.ca.gov/
In Covered Electronic Devices, as defined by the California Electronic Waste Recycling Act: http://www.dtsc.ca.gov/
In Covered Electronic Devices, as defined by the California Electronic Waste Recycling Act: http://www.dtsc.ca.gov/
Latches
2.2.3 Substances of Very High Concern (SVHC) in Articles - Requirements
The current candidate list of REACH SVHC as published by the European Chemicals Agency is located at: Http://echa.europa.eu/. Annex NN in this specification also has the list of SVHC Candidate Substances as of the date of this document. Please check the web site for updates since this list is subject to change. Annex OO is the list of substances subject to REACH Authorization (current as of the date of this specification).
IBM requires suppliers to identify if any substances on the SVHC Candidate list are present in an Article at or above the 0.1% weight by weight (w/w) concentration and report the name and CAS number of the SVHC candidate and the quantity on the Product Content Declaration (PCD) for the Deliverable. The Court of Justice of the European
PN 46G3772 Page 36 of 197 EC J85151 13MAY05
EC 899569 04NOV93 EC G32590 08FEB06
EC 899773 07DEC94 EC L04925B 11JAN07
EC F15040 25AUG97 EC L04925M 01AUG07
EC F73298 02SEP99 EC L04925N 19FEB08
EC F74336 05SEP00 EC L05962X 08AUG08
EC F72950 23JAN02 EC L79598 25FEB09
EC H64064 13MAY03 EC N24534E 02OCT09
EC H17205 29JUL03 EC L79598A 22FEB10
EC L79598B 22SEPT10
EC L79598C 27APR2011
EC L79598D 6SEPT2011
EC N31517Y 26MAR2012
ECN31946T 19APR2013
ECN33076 5DEC2013
ECN33076A 16MAY2014
ECN46883 17OCT2014
ECP02692 26MAY2015
ECO P02838 15OCT2015
ECOP17505 21APR2016
ECO P17633 1OCT2016
ECOP17764 20MAR2017
ECOP17905 16OCT2017
ECOP17958 Jan 25, 2018
ECOP44540 June 11, 2018
ECOP44680 Mar 5, 2019
ECOP44794 Aug 9, 2019
ECO P44877 15Feb2020
ECO P45188 1Sept2020
ECO P45272 9Mar2021
ECO P45379 18Oct2021
ECO 45443 4April2022
ECO P45475 14Nov2022
This document is the property of IBM. Its use is authorized only for responding to a request for quotation or for the performance of work for IBM. All questions must be referred to the IBM Procurement Department requesting the quotation or performance of work.
Engineering Specification
Page 37 of 197
Union provided Judgement in Case C-106/14 on September 10, 2015 that a complex Article can have one or more constituent Articles and that the 0.1% weight by weight of SVHCs applies to the constituent Articles of a more complex Article. The table in this section has a list of SVHC Candidate substances which may potentially be present in Information Technology (IT) equipment. Some of the SVHC substances are not included on this table for various reasons such as they are already restricted by other laws or are unlikely to be present in IT equipment. Annex NN has the list of SVHC, as of the date of this document, including those with a potential to be in IT equipment. Please note, the underlined text above emphasizes the need to report on the PCD substances and their weights present in the Article to IBM, which may be different from the weight of the substances in the raw material used. Web links to Court Judgement and guidance information http://curia.europa.eu/juris/document/document.jsf?docid=167286&mode=req&pageIndex=1&dir=&occ=first&part =1&text=&doclang=EN&cid=644081 http://curia.europa.eu/jcms/upload/docs/application/pdf/2015-09/cp150100en.pdf The latest version of the European Chemicals Agency (ECHA) Guidance on requirements for substances in articles:
https://echa.europa.eu/guidance-documents/guidance-on-reach?panel=guidance-on-requirements-for-substances-in-articles#guidance-onrequirements-for-substances-in-articles
If an SVHC is present in an Article at or above the reporting concentrations (at or above the 0.1% weight by weight (w/w) concentration), report it on the PCD. The drop-down screen on the PCD will have the chemicals found in Table 5. There is a row in the drop-down menu of the PCD for "Other" which can be used for reporting SVHC substances not in Table 5.
IBM may request, from the part or product supplier, their identification number for the part or product as registered in the EU Substances of Concern In articles or in complex objects (Products) (SCIP) database. See the EU SCIP database for more details at https://echa.europa.eu/scip-database. If an SVHC in Table 5 or Annex NN is present in an Article at or above the reporting concentrations (at or above the 0.1% weight by weight (w/w) concentration) the Supplier must provide a customer communication to IBM meeting the requirements of Article 33 of the EU REACH Regulation when the Article is procured by IBM in the European Union. Please provide a copy of this communication to the author of this specification. Information about REACH can be found at the European Chemicals Agency website www.echa.europa.eu.
See Annex NN for a full list of SVHCs at the time of this release of 46G3772. Table 5. Reporting of Substances of Very High Concern
SVHC (from proposed Candidate List)
Acrylamide
CAS Number
Reporting Concentration
79-06-1
At or above 0.1% weight by weight of the Article
Aluminosilicate, Refractory Not available Ceramic Fibers
At or above 0.1% weight by weight of the Article
Ammonium pentadecafluorooctanoate (APFO) Anthracene
3825-26-1 120-12-7
Benz[a]anthracene
56-55-3
1,2-Benzenedicarboxylic acid, di-C 6-8- branched alkyl esters, C7-rich (Diisoheptyl phthalate) (DIHP)
71888-89-6
At or above 0.1% weight by weight of the Article
At or above 0.1% weight by weight of the Article
At or above 0.1% weight by weight of the Article At or above 0.1% weight by weight of the Article
Examples of industry uses
Synthesis of polyacrylamides. Polyacrylamides can be used in various applications, e.g., paper processing, gels, and grouting agent. High temperature insulating fiber for industrial furnaces, pipes, ducts, and cables. Fire protection equipment, e.g., heat shields. Brake pads, air bags, catalytic converters, and metal reinforcements. Processing aid in the production of fluoropolymers and fluoroelastomers and other surfactant uses. Scintillator for radiation detection. Radiation therapy dosimetry. Used to make dyes, plastics, and pesticides. Carbon black pigment. Black plastic and rubber.
Plasticizer in PVC, sealants, and printing inks.
PN 46G3772 Page 37 of 197 EC J85151 13MAY05
EC 899569 04NOV93 EC G32590 08FEB06
EC 899773 07DEC94 EC L04925B 11JAN07
EC F15040 25AUG97 EC L04925M 01AUG07
EC F73298 02SEP99 EC L04925N 19FEB08
EC F74336 05SEP00 EC L05962X 08AUG08
EC F72950 23JAN02 EC L79598 25FEB09
EC H64064 13MAY03 EC N24534E 02OCT09
EC H17205 29JUL03 EC L79598A 22FEB10
EC L79598B 22SEPT10
EC L79598C 27APR2011
EC L79598D 6SEPT2011
EC N31517Y 26MAR2012
ECN31946T 19APR2013
ECN33076 5DEC2013
ECN33076A 16MAY2014
ECN46883 17OCT2014
ECP02692 26MAY2015
ECO P02838 15OCT2015
ECOP17505 21APR2016
ECO P17633 1OCT2016
ECOP17764 20MAR2017
ECOP17905 16OCT2017
ECOP17958 Jan 25, 2018
ECOP44540 June 11, 2018
ECOP44680 Mar 5, 2019
ECOP44794 Aug 9, 2019
ECO P44877 15Feb2020
ECO P45188 1Sept2020
ECO P45272 9Mar2021
ECO P45379 18Oct2021
ECO 45443 4April2022
ECO P45475 14Nov2022
This document is the property of IBM. Its use is authorized only for responding to a request for quotation or for the performance of work for IBM. All questions must be referred to the IBM Procurement Department requesting the quotation or performance of work.
Engineering Specification
Page 38 of 197
Table 5. Reporting of Substances of Very High Concern
SVHC (from proposed Candidate List)
1,2-benzenedicarboxylic acid, di-C6-10-alkyl esters; 1,2-benzenedicarboxylic acid, mixed decyl and hexyl and octyl diesters with > 0.3% of dihexyl phthalate 1,2-Benzenedicarboxylic acid, di-C 7-11- branched and linear alkyl esters (Di(heptyl, nonyl, undecyl) phthalate - DHNUP) 1,2-Benzenedicarboxylic acid, dihexyl ester, branched and linear Benzo[ghi]perylene
CAS Number 68515-51-5; 68648-93-1
68515-42-4
68515-50-4 191-24-2
Benzo[k]fluoranthene
207-08-9
Reporting Concentration At or above 0.1% weight by weight of the Article
At or above 0.1% weight by weight of the Article
At or above 0.1% weight by weight of the Article At or above 0.1% weight by weight of the Article At or above 0.1% weight by weight of the Article
2-benzotriazol-2-yl-4,6-ditert-butylphenol (UV-320) 2-(2H-benzotriazol-2-yl)4,6-ditertpentylphenol (UV328) 2-(2H-benzotriazol-2-yl)-4(tert-butyl)-6-(sec-butyl) phenol (UV-350) 2-benzyl-2-dimethylamino4'morpholinobutyrophenone
3846-71-7 25973-55-1 36437-37-3 119313-12-1
At or above 0.1% weight by weight of the Article At or above 0.1% weight by weight of the Article
At or above 0.1% weight by weight of the Article
At or above 0.1% weight by weight of the Article
2,2bis(bromomethyl)propane1,3-diol (BMP); 2,2dimethylpropan-1-ol, tribromo derivative/3bromo-2,2bis(bromomethyl)-1propanol (TBNPA); 2,3dibromo-1-propanol (2,3DBPA) Bis(2-methoxyethyl) phthalate
96-13-9 1522-92-5 36483-57-5 3296-90-0
117-82-8
At or above 0.1% weight by weight of the Article
At or above 0.1% weight by weight of the Article
Bis(2-(2methoxyethoxy)ethyl)ether (Tetraglyme)
143-24-8
At or above 0.1% weight by weight of the Article
Examples of industry uses
Plasticizer and lubricant. Use in adhesives, coatings, cable compounding, polymer foils, and PVC compounds.
Plasticizer
Plasticizer in PVC, rubbers, inks, and lacquers.
Unintended impurity in polymers and rubbers. Unintended impurity in carbon black, extender oils and petrochemical byproducts such as polymers and rubbers. UV stabilizer.
UV stabilizer in coatings, ABS resin, epoxy resin, fiber resin, propylene and polyvinyl chloride. UV protection agent in coatings, plastics, and rubber.
Used in polymer production. Used as a photo-initiator which is added to UV curable inks, toners, adhesives, resins, paints and other coatings Used in polymer production. Used an intermediate
Plasticizer for nitrocellulose, acetyl cellulose, polyvinyl acetate, polyvinyl chloride and polyvinylidene chloride. Enameled wire, film, high-strength varnish and adhesive. Used in lubricants and lubricant additives, processing aids, not otherwise listed, and in solvents
Bis(tributyltin)oxide (TBTO)
56-35-9
At or above 0.1% weight by weight of the Article
Antiseptic, antifungal agent, paint, pigment, antistaining, refrigerant, foaming agent, and extinguishant.
PN 46G3772 Page 38 of 197 EC J85151 13MAY05
EC 899569 04NOV93 EC G32590 08FEB06
EC 899773 07DEC94 EC L04925B 11JAN07
EC F15040 25AUG97 EC L04925M 01AUG07
EC F73298 02SEP99 EC L04925N 19FEB08
EC F74336 05SEP00 EC L05962X 08AUG08
EC F72950 23JAN02 EC L79598 25FEB09
EC H64064 13MAY03 EC N24534E 02OCT09
EC H17205 29JUL03 EC L79598A 22FEB10
EC L79598B 22SEPT10
EC L79598C 27APR2011
EC L79598D 6SEPT2011
EC N31517Y 26MAR2012
ECN31946T 19APR2013
ECN33076 5DEC2013
ECN33076A 16MAY2014
ECN46883 17OCT2014
ECP02692 26MAY2015
ECO P02838 15OCT2015
ECOP17505 21APR2016
ECO P17633 1OCT2016
ECOP17764 20MAR2017
ECOP17905 16OCT2017
ECOP17958 Jan 25, 2018
ECOP44540 June 11, 2018
ECOP44680 Mar 5, 2019
ECOP44794 Aug 9, 2019
ECO P44877 15Feb2020
ECO P45188 1Sept2020
ECO P45272 9Mar2021
ECO P45379 18Oct2021
ECO 45443 4April2022
ECO P45475 14Nov2022
This document is the property of IBM. Its use is authorized only for responding to a request for quotation or for the performance of work for IBM. All questions must be referred to the IBM Procurement Department requesting the quotation or performance of work.
Engineering Specification
Page 39 of 197
Table 5. Reporting of Substances of Very High Concern
SVHC (from proposed Candidate List)
Boric acid
CAS Number
Reporting Concentration
10043-35-3, 11113-50-1
At or above 0.1% weight by weight of the Article
Cadmium
7440-43-9
At or above 0.1% weight by weight of the Article
Cadmium chloride Cadmium fluoride
10108-64-2 7790-79-6
At or above 0.1% weight by weight of the Article
At or above 0.1% weight by weight of the Article
Cadmium hydroxide Cadmium nitrate Cadmium oxide
21041-95-2 10325-94-7 1306-19-0
At or above 0.1% weight by weight of the Article At or above 0.1% weight by weight of the Article At or above 0.1% weight by weight of the Article
Cadmium sulphate Cadmium sulphide
Chrysene Cobalt (II) carbonate
10124-36-4; 31119-53-6 1306-23-6
218-01-9 513-79-1
At or above 0.1% weight by weight of the Article At or above 0.1% weight by weight of the Article
At or above 0.1% weight by weight of the Article At or above 0.1% weight by weight of the Article
Examples of industry uses
Applications include electrolytic capacitors, glass, ceramics, rubber, flame retardants, paints, industrial fluids, soldering products, wood veneers, pressed wood panels, and film developers. Applications include batteries, electroplating baths, electrical connectors and connector inserts, cadmium plated fasteners and bearing components, as an alloying element in copper, tin, and zinc alloys, electrical conductors, electrical contact materials in line starters and solenoid relays, and other devices subject to high surge current, pigments and dispersants in plastic, and inks. Please note, most of these applications are prohibited by the EU RoHS Directive. Applications include electroplating and electrogalvanizing, manufacture of solar cells Can be used in certain phosphorus for luminescent screens. Manufacture of glass, high- temperature dry film lubricant, and optical applications. Active component in fluxes for soldering of aluminum and its alloys. Manufacture of electrical, electronic and optical equipment. Manufacture of glass, porcelain, and ceramic products. Applications include batteries, electroplating baths, electrical connectors and connector inserts, cadmium plated fasteners and bearing components, as an alloying element in copper, tin, and zinc alloys, electrical conductors, electrical contact materials in line starters and solenoid relays, and other devices subject to high surge current, pigments and dispersants in plastic, and inks. Please note, most of these applications are prohibited by the EU RoHS Directive. Metal surface coating. Additive to increase performance of lead acid batteries. Used as a pigment. Used in manufacturing of photoresistors. Used for thin-film transistors. As a thin film can be used in piezoelectric and as transducers. Carbon black pigments Black plastic and rubber Used as an intermediate in the hydrometallurgical purification of cobalt from its ores, as an inorganic pigment, and as a precursor to catalysts.
PN 46G3772 Page 39 of 197 EC J85151 13MAY05
EC 899569 04NOV93 EC G32590 08FEB06
EC 899773 07DEC94 EC L04925B 11JAN07
EC F15040 25AUG97 EC L04925M 01AUG07
EC F73298 02SEP99 EC L04925N 19FEB08
EC F74336 05SEP00 EC L05962X 08AUG08
EC F72950 23JAN02 EC L79598 25FEB09
EC H64064 13MAY03 EC N24534E 02OCT09
EC H17205 29JUL03 EC L79598A 22FEB10
EC L79598B 22SEPT10
EC L79598C 27APR2011
EC L79598D 6SEPT2011
EC N31517Y 26MAR2012
ECN31946T 19APR2013
ECN33076 5DEC2013
ECN33076A 16MAY2014
ECN46883 17OCT2014
ECP02692 26MAY2015
ECO P02838 15OCT2015
ECOP17505 21APR2016
ECO P17633 1OCT2016
ECOP17764 20MAR2017
ECOP17905 16OCT2017
ECOP17958 Jan 25, 2018
ECOP44540 June 11, 2018
ECOP44680 Mar 5, 2019
ECOP44794 Aug 9, 2019
ECO P44877 15Feb2020
ECO P45188 1Sept2020
ECO P45272 9Mar2021
ECO P45379 18Oct2021
ECO 45443 4April2022
ECO P45475 14Nov2022
This document is the property of IBM. Its use is authorized only for responding to a request for quotation or for the performance of work for IBM. All questions must be referred to the IBM Procurement Department requesting the quotation or performance of work.
Engineering Specification
Page 40 of 197
Table 5. Reporting of Substances of Very High Concern
SVHC (from proposed Candidate List)
Cobalt (II) diacetate
CAS Number
Reporting Concentration
71-48-7
At or above 0.1% weight by weight of the Article
Cobalt dichloride
7646-79-9
At or above 0.1% weight by weight of the Article
Cobalt (II) dinitrate Cobalt (II) sulphate
10141-05-6 10124-43-3
At or above 0.1% weight by weight of the Article At or above 0.1% weight by weight of the Article
Cyclohexane-1,2dicarboxylic anhydride
4,4'diaminodiphenylmethane
Diarsenic pentaoxide
85-42-7 101-77-9 1303-28-2
Diarsenic trioxide
1327-53-3
Diboron trioxide (Please note, report this substance only if it is present in a Deliverable in its pure original form, do not report if the substance is incorporated into a glass or bonded chemical structure). Dibutylbis(pentane-2,4dionato-O,O')tin
Dicyclohexyl phthalate (DCHP) Diisohexyl phthalate
1303-86-2
22673-19-4 7 71850-09-4
Diisopentylphthalate
605-50-5
Di-n-hexyl phthalate (DNHP) (synonym dihexyl phthalate)
1,2-dimethoxyethane; ethylene glycol dimethyl ether (EGDME) 2,4-Dinitrotoluene
84-75-3 110-71-4 121-14-2
Dipentyl phthalate (DPP) 131-18-0
1,4 Dioxane
123-91-1
At or above 0.1% weight by weight of the Article
At or above 0.1% weight by weight of the Article
At or above 0.1% weight by weight of the Article
At or above 0.1% weight by weight of the Article
At or above 0.1% weight by weight of the Article
At or above 0.1% weight by weight of the Article At or above 0.1% weight by weight of the Article At or above 0.1% weight by weight of the Article At or above 0.1% weight by weight of the Article At or above 0.1% weight by weight of the Article
At or above 0.1% weight by weight of the Article
At or above 0.1% weight by weight of the Article At or above 0.1% weight by weight of the Article At or above 0.1% weight by weight of the Article
Examples of industry uses
Used in production of intermediate chemicals, surface treatments, and adhesion improvement between rubber and steel. Cobalt plating and cobalt based pigments and drier compounds (desiccants). Pneumatic panels for indicating water contamination. Used in production of intermediate chemicals, surface treatment and batteries. Used in production of intermediate chemicals, surface treatment, corrosion prevention, batteries, preparation of pigments, manufacture of drier in lithographic inks. Manufacture of polyester and alkyd resins and plasticizers for thermoplastic polymers, hardener for epoxy resins As intermediate for polyurethane foam and resins. Hardener for epoxy resins and adhesives. Hardener for copper, lead or gold in alloys. Used in production of dyes and glass. Wood preservative. Glass. Used to make elemental arsenic, gallium arsenide, and some alloys. Glass. Wood preservative. Glass
Used as a catalyst in adhesives, paints, lacquers and sealants. Plasticizer in plastisol, PVC, rubber and plastics. Plasticizer in flexible polymers and rubbers, inks, lacquers and sealants Plasticizer. Used in manufacture of propellants. Plasticizer
Possible use in batteries.
Used in flexible polyurethane foams and in dye production. Plasticizer. Plasticizer in polyvinyl chloride
Solvent
PN 46G3772 Page 40 of 197 EC J85151 13MAY05
EC 899569 04NOV93 EC G32590 08FEB06
EC 899773 07DEC94 EC L04925B 11JAN07
EC F15040 25AUG97 EC L04925M 01AUG07
EC F73298 02SEP99 EC L04925N 19FEB08
EC F74336 05SEP00 EC L05962X 08AUG08
EC F72950 23JAN02 EC L79598 25FEB09
EC H64064 13MAY03 EC N24534E 02OCT09
EC H17205 29JUL03 EC L79598A 22FEB10
EC L79598B 22SEPT10
EC L79598C 27APR2011
EC L79598D 6SEPT2011
EC N31517Y 26MAR2012
ECN31946T 19APR2013
ECN33076 5DEC2013
ECN33076A 16MAY2014
ECN46883 17OCT2014
ECP02692 26MAY2015
ECO P02838 15OCT2015
ECOP17505 21APR2016
ECO P17633 1OCT2016
ECOP17764 20MAR2017
ECOP17905 16OCT2017
ECOP17958 Jan 25, 2018
ECOP44540 June 11, 2018
ECOP44680 Mar 5, 2019
ECOP44794 Aug 9, 2019
ECO P44877 15Feb2020
ECO P45188 1Sept2020
ECO P45272 9Mar2021
ECO P45379 18Oct2021
ECO 45443 4April2022
ECO P45475 14Nov2022
This document is the property of IBM. Its use is authorized only for responding to a request for quotation or for the performance of work for IBM. All questions must be referred to the IBM Procurement Department requesting the quotation or performance of work.
Engineering Specification
Page 41 of 197
Table 5. Reporting of Substances of Very High Concern
SVHC (from proposed Candidate List)
Disodium octaborate
CAS Number 12008-41-2
Disodium tetraborate, anhydrous
2-4-di-tert-butyl-6-(5chlorobenzotriazol-2yl)phenol (UV-327) 1,6,7,8,9,14,15,16,17,17,18, 18-Dodecachloropentacyclo [12.2.1.16,9.02,13.05,10] octadeca-7,15-diene ("Dechlorane Plus"TM) [covering any of its individual anti- and synisomers or any combination thereof] 2-Ethoxyethanol
1330-43-4 (anhydrous), 12179-04-3 (pentahydrate), 1303-96-4 (decahydrate) 3864-99-1
13560-89-9
110-80-5
Reporting Concentration At or above 0.1% weight by weight of the Article At or above 0.1% weight by weight of the Article
At or above 0.1% weight by weight of the Article At or above 0.1% weight by weight of the Article
At or above 0.1% weight by weight of the Article
2-Ethoxyethyl acetate
111-15-9
Ethylenediamine
107-15-3
2-ethylhexyl 10-ethyl-4,4dioctyl-7-oxo-8-oxa-3,5 dithia -4 stannatetra decanoate (DOTE) Fatty acids, C16-18, lead salts Fluoranthene
15571-58-1
91031-62-8 206-44-0; 93951-69-0
4-Heptylphenol, branched and linear; substances with a linear and/or branched alkyl chain with a carbon #r of 7 covalently bound predominantly in position 4 to phenol, covering also UVCB- and well-defined substances which include any of the individual isomers or a combination thereof Hexahydromethylphthalic anhydride
Not available 25550-51-0
At or above 0.1% weight by weight of the Article At or above 0.1% weight by weight of the Article At or above 0.1% weight by weight of the Article
At or above 0.1% weight by weight of the Article At or above 0.1% weight by weight of the Article At or above 0.1% weight by weight of the Article
At or above 0.1% weight by weight of the Article
Examples of industry uses Used in anti-freeze products, heat transfer fluids, lubricants and greases. Wood preservative. Biocide. Electrolytic capacitors.
UV stabilizer in cables and cords
Non-plasticizing flame retardant in nylon, PBT, PP, ABS, Epoxy, and PVC. Adhesives, sealants and binding agents.
Solvent for commercial and industrial applications. Multipurpose cleaner in such products as varnish remover and degreasers. Solvent. Used in formulations of paints, lacquers and varnishes for industrial uses. Used in adhesives and sealants, coating products, fillers, putties, and plasters. Use in manufacture of rubber and plastic products. Heat stabilizer in PVC. Coloring agent. Potential use in PVC processing for cables and power cords Unintended impurity in carbon black, extender oils and petrochemical byproducts such as polymers and rubbers. Manufacture of polymers, formulation into lubricants
Manufacture of polyester and alkyd resins and plasticizers for thermoplastic polymers, hardeners for epoxy resins
PN 46G3772 Page 41 of 197 EC J85151 13MAY05
EC 899569 04NOV93 EC G32590 08FEB06
EC 899773 07DEC94 EC L04925B 11JAN07
EC F15040 25AUG97 EC L04925M 01AUG07
EC F73298 02SEP99 EC L04925N 19FEB08
EC F74336 05SEP00 EC L05962X 08AUG08
EC F72950 23JAN02 EC L79598 25FEB09
EC H64064 13MAY03 EC N24534E 02OCT09
EC H17205 29JUL03 EC L79598A 22FEB10
EC L79598B 22SEPT10
EC L79598C 27APR2011
EC L79598D 6SEPT2011
EC N31517Y 26MAR2012
ECN31946T 19APR2013
ECN33076 5DEC2013
ECN33076A 16MAY2014
ECN46883 17OCT2014
ECP02692 26MAY2015
ECO P02838 15OCT2015
ECOP17505 21APR2016
ECO P17633 1OCT2016
ECOP17764 20MAR2017
ECOP17905 16OCT2017
ECOP17958 Jan 25, 2018
ECOP44540 June 11, 2018
ECOP44680 Mar 5, 2019
ECOP44794 Aug 9, 2019
ECO P44877 15Feb2020
ECO P45188 1Sept2020
ECO P45272 9Mar2021
ECO P45379 18Oct2021
ECO 45443 4April2022
ECO P45475 14Nov2022
This document is the property of IBM. Its use is authorized only for responding to a request for quotation or for the performance of work for IBM. All questions must be referred to the IBM Procurement Department requesting the quotation or performance of work.
Engineering Specification
Page 42 of 197
Table 5. Reporting of Substances of Very High Concern
SVHC (from proposed Candidate List)
Hexahydro-4methylphthalic anhydride Hydrazine
CAS Number
Reporting Concentration
19438-60-9
At or above 0.1% weight by weight of the Article
7803-57-8; 302- At or above 0.1% weight by
01-2
weight of the Article
Imidazolidine-2-thione; (2imidazoline-2-thiol) 4,4'-isopropylidenediphenol (bisphenol A) (Please note this substance has restrictions listed in Table 1, reporting here is for nonrestricted applications.)
96-45-7 80-05-7
Lead
7439-92-1
At or above 0.1% weight by weight of the Article At or above 0.1% weight by weight of the Article
At or above 0.1% weight by weight of the Article
Lead hydrogen arsenate Please note Table 1 of this specification and IBM RoHS Specifications 53P6233/ 97P3864 already restrict lead levels in many applications.
Lead monoxide (lead oxide) trioxide (Please note, report this substance only if it is present in a Deliverable in its pure original form, do not report if the substance is incorporated into a glass or bonded chemical structure).
Lead oxide sulphate
7784-40-9 1317-36-8 12036-76-9
Lead titanium trioxide
12060-00-3
Lead titanium zirconium oxide
12626-81-2
At or above 0.1% weight by weight of the Article
At or above 0.1% weight by weight of the Article
At or above 0.1% weight by weight of the Article At or above 0.1% weight by weight of the Article At or above 0.1% weight by weight of the Article
Examples of industry uses
Manufacture of polyester and alkyd resins and plasticizers for thermoplastic polymers, hardeners for epoxy resins Blowing agent for thermoplastic and Elastomers. Organic dyes for textiles. Precursor to polymerization catalysts. Metallization of glass, plastics and metals. Nickel and palladium electroless deposition. Making printed circuit board holes conductive. Vulcanization agent in and neoprene and polyacrylate rubber articles. Used in synthesis of epoxy and plastic resins, e.g., polycarbonate, polyesters. Antioxidant in some plasticizers. Polymerization inhibitor in PVC. Precursor for the flame retardant tetrabromobisphenol A. Color developer in thermal paper. Carbonless paper. Used in metals, welding and soldering products, metal surface treatment products and polymers. Lead acid batteries. Alloying element in steel, aluminum and copper. Used in piezoelectronic devices, glass or ceramic matrix compounds, dielectric ceramic in capacitors, and glass for optical applications, filter and reflectance. Biocide for wood.
Potential use in lead acid batteries Glass
Potential use in lead acid batteries
Ceramics
Piezo ceramic compounds, processing into electro-ceramic components, ultrasonic spray films in a humidifier
PN 46G3772 Page 42 of 197 EC J85151 13MAY05
EC 899569 04NOV93 EC G32590 08FEB06
EC 899773 07DEC94 EC L04925B 11JAN07
EC F15040 25AUG97 EC L04925M 01AUG07
EC F73298 02SEP99 EC L04925N 19FEB08
EC F74336 05SEP00 EC L05962X 08AUG08
EC F72950 23JAN02 EC L79598 25FEB09
EC H64064 13MAY03 EC N24534E 02OCT09
EC H17205 29JUL03 EC L79598A 22FEB10
EC L79598B 22SEPT10
EC L79598C 27APR2011
EC L79598D 6SEPT2011
EC N31517Y 26MAR2012
ECN31946T 19APR2013
ECN33076 5DEC2013
ECN33076A 16MAY2014
ECN46883 17OCT2014
ECP02692 26MAY2015
ECO P02838 15OCT2015
ECOP17505 21APR2016
ECO P17633 1OCT2016
ECOP17764 20MAR2017
ECOP17905 16OCT2017
ECOP17958 Jan 25, 2018
ECOP44540 June 11, 2018
ECOP44680 Mar 5, 2019
ECOP44794 Aug 9, 2019
ECO P44877 15Feb2020
ECO P45188 1Sept2020
ECO P45272 9Mar2021
ECO P45379 18Oct2021
ECO 45443 4April2022
ECO P45475 14Nov2022
This document is the property of IBM. Its use is authorized only for responding to a request for quotation or for the performance of work for IBM. All questions must be referred to the IBM Procurement Department requesting the quotation or performance of work.
Engineering Specification
Page 43 of 197
Table 5. Reporting of Substances of Very High Concern
SVHC (from proposed Candidate List)
Medium-chain chlorinated paraffins (MCCP) (UVCB substances consisting of more than or equal to 80% linear chloroalkanes with carbon chain lengths within the range from C14 to C17) 4,4'-(1-methylpropylidene) bisphenol 2-Methoxyethanol
CAS Number 1372804-76-6 85535-85-9 198840-65-2
77-40-7 109-86-4
Reporting Concentration At or above 0.1% weight by weight of the Article
At or above 0.1% weight by weight of the Article At or above 0.1% weight by weight of the Article
2-methoxyethyl acetate
110-49-6
At or above 0.1% weight by weight of the Article
2-methyl-1-(4methylthiophenyl)-2morpholinopropan-1-one
71868-10-5
At or above 0.1% weight by weight of the Article
1-Methyl-2-pyrrolidone
872-50-4
At or above 0.1% weight by weight of the Article
2-methylimidazole
693-98-1
N-
924-42-5
(hydroxymethyl)acrylamide
Nitrobenzene
98-95-3
N,N-dimethylacetamide (DMAC)
127-19-5
At or above 0.1% weight by weight of the Article
At or above 0.1% weight by weight of the Article At or above 0.1% weight by weight of the Article At or above 0.1% weight by weight of the Article
N,N-dimethylformamide 68-12-2
At or above 0.1% weight by weight of the Article
Examples of industry uses
Flame retardants, plasticising additives in plastics, sealants, rubber and textiles.
Used in manufacture of phenolic and polycarbonate resin Manufacture of rubber and plastic products. Multipurpose solvent, for example, in varnishes, dyes, and resins. Solvent for varnishes, enamels, inks, stains, gums, resins, waxes, and oils; manufacture of semiconductors; textile printing, photographic films Used in polymer production. Used as a photo-initiator added to UV curable inks, toners, lacquers, paints and resins. May be used in solder masks and etch resists in glass fiber composites. High temperature coating, urethane dispersions, acrylic and styrene latexes. Paint remover, industrial degreaser, and injection head and cast-molding equipment cleaner. Cleaning, de-fluxing, edge bead removal and photoresist stripping. Used as a dyeing additive for acrylic fibres and in polymer foams, as a curing agent for epoxy resins, printed circuit board laminates and in various adhesives and in encapsulation. Used in adhesives, binders, surface coatings, and resins Can be found in some synthetic rubbers and lubricating oils. Solvent in coatings e.g. polyamide-imide (PAI) enamels (varnishes) used for electrical wire insulation, Process solvent in production of polyimide and polysulphone films; Process solvent for spinning fibers of various polymers including acrylic, polyurethane polyurea copolymer (Elastane, Spandex) and poly(m-phenylene isophthalamide) (PMIA, meta-aramid) Used in synthetic/artificial leather of polyurethane. Manufacture of printed circuit boards. Cleaning solvent in the leather or artificial leather industry. Solvent.
PN 46G3772 Page 43 of 197 EC J85151 13MAY05
EC 899569 04NOV93 EC G32590 08FEB06
EC 899773 07DEC94 EC L04925B 11JAN07
EC F15040 25AUG97 EC L04925M 01AUG07
EC F73298 02SEP99 EC L04925N 19FEB08
EC F74336 05SEP00 EC L05962X 08AUG08
EC F72950 23JAN02 EC L79598 25FEB09
EC H64064 13MAY03 EC N24534E 02OCT09
EC H17205 29JUL03 EC L79598A 22FEB10
EC L79598B 22SEPT10
EC L79598C 27APR2011
EC L79598D 6SEPT2011
EC N31517Y 26MAR2012
ECN31946T 19APR2013
ECN33076 5DEC2013
ECN33076A 16MAY2014
ECN46883 17OCT2014
ECP02692 26MAY2015
ECO P02838 15OCT2015
ECOP17505 21APR2016
ECO P17633 1OCT2016
ECOP17764 20MAR2017
ECOP17905 16OCT2017
ECOP17958 Jan 25, 2018
ECOP44540 June 11, 2018
ECOP44680 Mar 5, 2019
ECOP44794 Aug 9, 2019
ECO P44877 15Feb2020
ECO P45188 1Sept2020
ECO P45272 9Mar2021
ECO P45379 18Oct2021
ECO 45443 4April2022
ECO P45475 14Nov2022
This document is the property of IBM. Its use is authorized only for responding to a request for quotation or for the performance of work for IBM. All questions must be referred to the IBM Procurement Department requesting the quotation or performance of work.
Engineering Specification
Page 44 of 197
Table 5. Reporting of Substances of Very High Concern
SVHC (from proposed Candidate List)
Nonadecafluorodecanoic acid (PFDA) and its sodium and ammonium salts: Nonadecafluorodecanoic acid, Ammonium nonadecafluorodecanoate Decanoic acid, nonadecafluoro-, sodium salt Octamethylcyclotetrasiloxa ne Orange lead (lead tetroxide)
CAS Number
335-76-2 3108-42-7 3830-45-3 556-67-2 1314-41-6
p-(1,1dimethylpropyl)phenol Pentadecafluorooctanoic acid (PFOA). Please note these substances have restrictions listed in Tables 1 and 2. Perfluorononan-1-oic-acid and its sodium and ammonium salts Ammonium salts of perfluorononan-1-oic-acid Perfluorononan-1-oic-acid Sodium salts of perfluorononan-1-oic-acid
80-46-6 335-67-1
4149-60-4 375-95-1 21049-39-8
Reporting Concentration At or above 0.1% weight by weight of the Article
At or above 0.1% weight by weight of the Article At or above 0.1% weight by weight of the Article At or above 0.1% weight by weight of the Article At or above 0.1% weight by weight of the Article
At or above 0.1% weight by weight of the Article
Examples of industry uses Lubricant, wetting agent, plasticizer and corrosion inhibitor.
Chemical intermediates for the production of silicone rubbers, gels and resins. Potential use in lead acid batteries. Used in production of polymers. Surfactant in emulsion polymerization of fluoropolymers
Lubricating oil additive, cleaning agent, liquid crystal display panels, polishing surfactant, waterproofing agents and textile antifouling finishing agent
PN 46G3772 Page 44 of 197 EC J85151 13MAY05
EC 899569 04NOV93 EC G32590 08FEB06
EC 899773 07DEC94 EC L04925B 11JAN07
EC F15040 25AUG97 EC L04925M 01AUG07
EC F73298 02SEP99 EC L04925N 19FEB08
EC F74336 05SEP00 EC L05962X 08AUG08
EC F72950 23JAN02 EC L79598 25FEB09
EC H64064 13MAY03 EC N24534E 02OCT09
EC H17205 29JUL03 EC L79598A 22FEB10
EC L79598B 22SEPT10
EC L79598C 27APR2011
EC L79598D 6SEPT2011
EC N31517Y 26MAR2012
ECN31946T 19APR2013
ECN33076 5DEC2013
ECN33076A 16MAY2014
ECN46883 17OCT2014
ECP02692 26MAY2015
ECO P02838 15OCT2015
ECOP17505 21APR2016
ECO P17633 1OCT2016
ECOP17764 20MAR2017
ECOP17905 16OCT2017
ECOP17958 Jan 25, 2018
ECOP44540 June 11, 2018
ECOP44680 Mar 5, 2019
ECOP44794 Aug 9, 2019
ECO P44877 15Feb2020
ECO P45188 1Sept2020
ECO P45272 9Mar2021
ECO P45379 18Oct2021
ECO 45443 4April2022
ECO P45475 14Nov2022
This document is the property of IBM. Its use is authorized only for responding to a request for quotation or for the performance of work for IBM. All questions must be referred to the IBM Procurement Department requesting the quotation or performance of work.
Engineering Specification
Page 45 of 197
Table 5. Reporting of Substances of Very High Concern
SVHC (from proposed Candidate List)
Perfluorobutane sulfonic acid (PFBS) and its salts: N,N,N,triethylethanaminium 1,1,2,2,3,3,4,4,4nonafluorobutane-1sulfonate; Magnesium perfluorobutane sulfonate PFBS; 1-Butanesulfonic acid, 1,1,2,2,3,3,4,4,4nonafluoro-, lithium salt (1:1); Morpholinium perfluorobutane sulfonate; PFBS; Ammonium 1,1,2,2,3,3,4,4,4nonafluorobutane-1sulphonate; Sulfonium, dimethylphenyl-, salt with 1,1,2,2,3,3,4,4,4nonafluoro-1butanesulfonic acid(1:1); Sulfonium, triphenyl-, salt with 1,1,2,2,3,3,4,4,4nonafluoro-1butanesulfonic acid(1:1); Potassium 1,1,2,2,3,3,4,4,4nonafluorobutane-1sulphonate; Tetrabutyl-phosphonium nonafluoro-butane-1sulfonate Phenanthrene
CAS Number 25628-08-4
507453-86-3 131651-65-5 503155-89-3 68259-10-9 220133-51-7
144317-44-2 29420-49-3 220689-12-3 85-01-8
Reporting Concentration At or above 0.1% weight by weight of the Article
At or above 0.1% weight by weight of the Article
[Phthalate (2-)]dioxotrilead 1,3-propanesultone Pyrene
69011-06-9
1120-71-4
129-00-0; 171852-1
At or above 0.1% weight by weight of the Article At or above 0.1% weight by weight of the Article At or above 0.1% weight by weight of the Article
Pyrochlore, antimony lead 8012-00-8 yellow
At or above 0.1% weight by weight of the Article
Examples of industry uses Catalyst/additive/reactant in polymer manufacturing and in chemical synthesis. Used as a flame retardant in polycarbonate.
Unintended impurity in carbon black, extender oils and petrochemical byproducts such as polymers and rubbers. Potential plasticizer in cable jacketing Electrolyte fluid in lithium ion batteries Unintended impurity in carbon black, extender oils and petrochemical byproducts such as polymers and rubbers. Potential pigment in paints and inks
PN 46G3772 Page 45 of 197 EC J85151 13MAY05
EC 899569 04NOV93 EC G32590 08FEB06
EC 899773 07DEC94 EC L04925B 11JAN07
EC F15040 25AUG97 EC L04925M 01AUG07
EC F73298 02SEP99 EC L04925N 19FEB08
EC F74336 05SEP00 EC L05962X 08AUG08
EC F72950 23JAN02 EC L79598 25FEB09
EC H64064 13MAY03 EC N24534E 02OCT09
EC H17205 29JUL03 EC L79598A 22FEB10
EC L79598B 22SEPT10
EC L79598C 27APR2011
EC L79598D 6SEPT2011
EC N31517Y 26MAR2012
ECN31946T 19APR2013
ECN33076 5DEC2013
ECN33076A 16MAY2014
ECN46883 17OCT2014
ECP02692 26MAY2015
ECO P02838 15OCT2015
ECOP17505 21APR2016
ECO P17633 1OCT2016
ECOP17764 20MAR2017
ECOP17905 16OCT2017
ECOP17958 Jan 25, 2018
ECOP44540 June 11, 2018
ECOP44680 Mar 5, 2019
ECOP44794 Aug 9, 2019
ECO P44877 15Feb2020
ECO P45188 1Sept2020
ECO P45272 9Mar2021
ECO P45379 18Oct2021
ECO 45443 4April2022
ECO P45475 14Nov2022
This document is the property of IBM. Its use is authorized only for responding to a request for quotation or for the performance of work for IBM. All questions must be referred to the IBM Procurement Department requesting the quotation or performance of work.
Engineering Specification
Page 46 of 197
Table 5. Reporting of Substances of Very High Concern
SVHC (from proposed Candidate List)
Reaction mass of 2-ethyl hexyl 10-ethyl-4,4-dioctyl7-oxo-8-oxa-3,5-dithia-4stannatetradecanoate and 2ethylhexyl 10-ethyl-4-[[2[(2-ethylheyxl)oxy]- 2oxoethyl]thio]-4-octyl-7oxo-8-oxa-3,5-dithia-4stannatetradecanoate (reaction mass of DOTE and MOTE) Reaction products of 1,3,4thiadiazolidine-2,5dithione, formaldehyde and 4-heptylphenol, branched and linear (RP-HP) [with 0.1% w/w 4-heptylphenol, branched and linear] Silicic acid, lead salt
CAS Number Not Available
Not Available 11120-22-2
Terphenyl, hydrogenated 61788-32-7
Reporting Concentration At or above 0.1% weight by weight of the Article
At or above 0.1% weight by weight of the Article
At or above 0.1% weight by weight of the Article At or above 0.1% weight by weight of the Article
4-tert-butylphenol
98-54-4
At or above 0.1% weight by weight of the Article
Tetraboron disodium heptaoxide, hydrate
12267-73-1
At or above 0.1% weight by weight of the Article
2,3,3,3-tetrafluoro-2(heptafluoropropoxy)propio nic acid, its salts and its acyl halides (covering any of their individual isomers and combinations thereof) Tetralead trioxide sulphate
13252-13-6 12202-17-4
Trichloroethylene
79-01-6
1,2,3-Trichloropropane Triethyl arsenate
96-18-4 15606-95-8
At or above 0.1% weight by weight of the Article
At or above 0.1% weight by weight of the Article At or above 0.1% weight by weight of the Article
At or above 0.1% weight by weight of the Article At or above 0.1% weight by weight of the Article
Examples of industry uses Heat stabilizer in PVC.
Additive in lubricants and greases.
Lead crystal ware Used as a plastic additive, solvent, in coatings/inks, in adhesives and sealants, and heat transfer fluids. Process chemical used in phenolic resins, polycarbonate, epoxy resins, coating products, polymers, adhesives, sealants and for the synthesis of other substances. Additive for UV stabilizers. Applications include electrolytic capacitors, glass and glass fibers, ceramics, cleaners, industrial fluids, metallurgy, adhesives, wood applications, and flame retardants. Processing aid in the production of fluorinated polymers
Potential stabilizer in PVC Industrial solvent. Solvents for adhesives. Degreaser for metal parts. Intermediate in manufacture of chlorinated and fluorinated organic compounds. Paint and varnish remover. Solvent for oils, fats, waxes, rubber, and resins. Degreasing agent. Biocide for wood.
PN 46G3772 Page 46 of 197 EC J85151 13MAY05
EC 899569 04NOV93 EC G32590 08FEB06
EC 899773 07DEC94 EC L04925B 11JAN07
EC F15040 25AUG97 EC L04925M 01AUG07
EC F73298 02SEP99 EC L04925N 19FEB08
EC F74336 05SEP00 EC L05962X 08AUG08
EC F72950 23JAN02 EC L79598 25FEB09
EC H64064 13MAY03 EC N24534E 02OCT09
EC H17205 29JUL03 EC L79598A 22FEB10
EC L79598B 22SEPT10
EC L79598C 27APR2011
EC L79598D 6SEPT2011
EC N31517Y 26MAR2012
ECN31946T 19APR2013
ECN33076 5DEC2013
ECN33076A 16MAY2014
ECN46883 17OCT2014
ECP02692 26MAY2015
ECO P02838 15OCT2015
ECOP17505 21APR2016
ECO P17633 1OCT2016
ECOP17764 20MAR2017
ECOP17905 16OCT2017
ECOP17958 Jan 25, 2018
ECOP44540 June 11, 2018
ECOP44680 Mar 5, 2019
ECOP44794 Aug 9, 2019
ECO P44877 15Feb2020
ECO P45188 1Sept2020
ECO P45272 9Mar2021
ECO P45379 18Oct2021
ECO 45443 4April2022
ECO P45475 14Nov2022
This document is the property of IBM. Its use is authorized only for responding to a request for quotation or for the performance of work for IBM. All questions must be referred to the IBM Procurement Department requesting the quotation or performance of work.
Engineering Specification
Page 47 of 197
Table 5. Reporting of Substances of Very High Concern
SVHC (from proposed Candidate List)
Tris(4-nonylphenyl, branched and linear) phosphite (TNPP) with 0.1% w/w of 4nonylphenol, branched and linear (4-NP) 1,3,5-Tris(oxiran-2ylmethyl)-1,3,5-triazinane2,4,6-trione (TGIC)
CAS Number Not available
2451-62-9
Reporting Concentration At or above 0.1% weight by weight of the Article
At or above 0.1% weight by weight of the Article
1-vinylimidazole
1072-63-5
Zirconia Aluminosilicate, Not available Refractory Ceramic Fibers
At or above 0.1% weight by weight of the Article
At or above 0.1% weight by weight of the Article
Examples of industry uses
Antioxidant to stabilize polymers such as PVC, low and high density polyethylene and rubbers. Additive in paints, powder coating and adhesives.
Hardener in resins and coatings; used in inks for the printed circuit board industry, electrical insulation material, resin molding systems, laminated sheeting, silk screen printing coatings, tools, adhesives, lining materials and stabilizers for plastics Used as a reactive additive used to make UV lacquers, inks and adhesives for coatings and lacquers. High temperature insulating fiber for industrial furnaces, pipes, ducts, cables, and high-temp test equipment. Fire protection equipment such as heat shields. Used for brake pads, catalytic converters, metal reinforcement, and air bags
Requirements for IBM suppliers of Articles produced within the European Union or the European Free Trade Association Articles (e.g., Parts, Products, Deliverables, and components thereof) containing SVHCs listed in EU Regulation 1907/2006 REACH Annex XIV "List of Substances Subject to Authorization" and supplied to IBM from suppliers who produce the Articles within the European Union or the European Free Trade Association must have any use of these SVHCs Authorized in accordance with Title VII of EU Regulation 1907/2006. Annex OO of this specification lists the Substances of Very High Concern subject to Authorization as of the date of this specification. The European Chemicals Agency maintains a current list of approved authorizations. IBM suppliers producing Articles containing an Authorized SVHC within the European Union or the European Economic Area must have an Authorization for this use. The Authorization number must be provided to IBM.
2.3 Marking of Products and Parts
2.3.1 Product/Part
Logo and Compliance Identification Number
A mark, such as a logo, identifying the producer of a Product must be permanently affixed and clearly displayed on the Product. Examples of Products requiring a logo include, but are not limited to printers, servers, workstations, storage products, external drives, Uninterruptible Power Supplies, monitors including both standalone and monitors embedded in a system, laptops including those embedded in a system, keyboards, mice, kiosks, external power supplies, racks, power distribution units, and modems.
Products must have a compliance identification number, e.g., batch or serial number allowing identification of the
product. Examples of this identification include machine type, machine type model, feature code, or part number.
This information must be located on the product. It may be located on the agency label. Where the size or nature of
the product does not allow it, the required information must be provided on the packaging or in a document
accompanying the EEE. The compliance identification number must match the Declaration of Conformity (DoC)
required for RoHS and EU Energy Related Products (ERP) regulations. See Sections 2.12 and 2.14 for additional
details about DoCs.
PN 46G3772 Page 47 of 197 EC J85151 13MAY05
EC 899569 04NOV93 EC G32590 08FEB06
EC 899773 07DEC94 EC L04925B 11JAN07
EC F15040 25AUG97 EC L04925M 01AUG07
EC F73298 02SEP99 EC L04925N 19FEB08
EC F74336 05SEP00 EC L05962X 08AUG08
EC F72950 23JAN02 EC L79598 25FEB09
EC H64064 13MAY03 EC N24534E 02OCT09
EC H17205 29JUL03 EC L79598A 22FEB10
EC L79598B 22SEPT10
EC L79598C 27APR2011
EC L79598D 6SEPT2011
EC N31517Y 26MAR2012
ECN31946T 19APR2013
ECN33076 5DEC2013
ECN33076A 16MAY2014
ECN46883 17OCT2014
ECP02692 26MAY2015
ECO P02838 15OCT2015
ECOP17505 21APR2016
ECO P17633 1OCT2016
ECOP17764 20MAR2017
ECOP17905 16OCT2017
ECOP17958 Jan 25, 2018
ECOP44540 June 11, 2018
ECOP44680 Mar 5, 2019
ECOP44794 Aug 9, 2019
ECO P44877 15Feb2020
ECO P45188 1Sept2020
ECO P45272 9Mar2021
ECO P45379 18Oct2021
ECO 45443 4April2022
ECO P45475 14Nov2022
This document is the property of IBM. Its use is authorized only for responding to a request for quotation or for the performance of work for IBM. All questions must be referred to the IBM Procurement Department requesting the quotation or performance of work.
Engineering Specification
Page 48 of 197
California Safe Drinking Water and Toxic Enforcement Act
A warning, compliant to the requirements of California Title 27 California Code of Regulations Article 6 Clear and Reasonable Warnings, must be placed on Deliverables containing a substance listed on the California list of Chemicals Known to the State to Cause Cancer or Reproductive Toxicity when these substances are incorporated in a manner to expose any individual to the chemical. The list of substances and warning information can be found at: https://www.p65warnings.ca.gov/ https://www.p65warnings.ca.gov/chemicals
For use of lead in Frequently Handled Cables, see Table 1. Lead concentrations below 300 ppm in Frequently Handled Cables do not require a warning label as described above. IBM Procurement will request a laboratory analysis to document the level of lead in the cable jacketing of Frequently Handled Cables. The test report must use a method of sufficient sensitivity to establish a limit of quantification of less than 300 ppm. Frequently handled cables include but are not limited to:
Computer mouse cords, Computer peripheral wires and cables designed to plug into front of system (e.g. USB cords), Computer peripheral AC adapter cord and I/F cable for portable computers or portable peripheral devices, Computer peripheral PCMCIA card cord for portable computers, Computer peripheral wires and cables for portable computers, Computer speaker cords used with portable computers, Desktop computer power/patch/pin cords designed to plug into front of computer, External CD/DVD and tape drives for portable computers, Mobile PC computer cords, Computer joystick, Audio or video adapter cords for portable products, Audio or video cable for portable products, Audio/Video/Computer/telecommunications cables packaged individually for retail sales, Portable digital imaging equipment, Portable DVD player, Portable power adapters, AC adapters for foreign outlets and other voltage converters, Portable ZIP drives, Scanners for portable computers, and USB, firewire cords.
California Best Management Practices for Perchlorate Materials
Deliverables with 6 parts per billion (ppb) or greater of perchlorate materials (see Annex MM for a list of some perchlorate substances) must include the following information with the Deliverable when shipping to a customer:
"For California: Perchlorate Material - special handling may apply. See http://www.dtsc.ca.gov/hazardouswaste/perchlorate. The foregoing notice is provided in accordance with California Code of Regulations Title 22, Division 4.5 Chapter 33 Best Management Practices for Perchlorate Materials." This requirement may be fulfilled by IBM via customer notices, please contact your IBM representative for more information. The following may be used to fulfill this requirement: a. IBM label part number 15R7482, or b. IBM flyer part number 42R6959, or c. IBM Environmental Notices and User Guide, either hardcopy, DVD, or CD, pdf file located at:
ftp://public.dhe.ibm.com/systems/support/warranty/envnotices/environmental_notices_and_user_guide.pdf
PN 46G3772 Page 48 of 197 EC J85151 13MAY05
EC 899569 04NOV93 EC G32590 08FEB06
EC 899773 07DEC94 EC L04925B 11JAN07
EC F15040 25AUG97 EC L04925M 01AUG07
EC F73298 02SEP99 EC L04925N 19FEB08
EC F74336 05SEP00 EC L05962X 08AUG08
EC F72950 23JAN02 EC L79598 25FEB09
EC H64064 13MAY03 EC N24534E 02OCT09
EC H17205 29JUL03 EC L79598A 22FEB10
EC L79598B 22SEPT10
EC L79598C 27APR2011
EC L79598D 6SEPT2011
EC N31517Y 26MAR2012
ECN31946T 19APR2013
ECN33076 5DEC2013
ECN33076A 16MAY2014
ECN46883 17OCT2014
ECP02692 26MAY2015
ECO P02838 15OCT2015
ECOP17505 21APR2016
ECO P17633 1OCT2016
ECOP17764 20MAR2017
ECOP17905 16OCT2017
ECOP17958 Jan 25, 2018
ECOP44540 June 11, 2018
ECOP44680 Mar 5, 2019
ECOP44794 Aug 9, 2019
ECO P44877 15Feb2020
ECO P45188 1Sept2020
ECO P45272 9Mar2021
ECO P45379 18Oct2021
ECO 45443 4April2022
ECO P45475 14Nov2022
This document is the property of IBM. Its use is authorized only for responding to a request for quotation or for the performance of work for IBM. All questions must be referred to the IBM Procurement Department requesting the quotation or performance of work.
Engineering Specification
Page 49 of 197
CE Mark for European Union and other jurisdictions
See Sections 2.12 and 2.14 for CE marking requirements for Energy Related Products (ERP) and RoHS regulations.
Engineering prototypes, which are put on display at trade fairs, exhibitions and demonstrations in the EU or other jurisdictions requiring a CE mark to indicate compliance to RoHS or ERP requirements, must be visibly labeled stating that the product may not be placed on the market and/or put into service until conformity is obtained. Please contact the author of this document for more information. Example wording for the label applied on the product may include "This device is an engineering prototype that has not obtained required agency authorizations. This device is not, and may not be offered for sale or lease, or sold or leased until authorization has been obtained. This device is the property of IBM and is not for resale."
The CE marking is the only marking that may be placed on the product to indicate the product or part is in conformance with an EU CE marking legislation. Other marks may be present on the part or product, but they must have a different function from that of demonstrating conformity to an EU CE marking legislation.
C Mark for the Republic of Srpska See Section 2.14 for details.
Cadmium labeling Electronic Displays with a screen panel in which concentration values of Cadmium (Cd) by weight in homogeneous materials exceed 0.01 % as defined in Directive 2011/65/EU on the restriction of the use of certain hazardous substances (RoHS) in electrical and electronic equipment, shall be labeled with the `Cadmium inside' logo. The logo shall be clearly visible durable, legible and indelible. The logo shall be in the form of the following graphic:
The dimension of `a' shall be greater than 9 mm and the typeface to be used is `Gill Sans'. An additional `Cadmium inside' logo shall be firmly attached internally on the display panel or molded in a position clearly visible to workers once the external back cover bearing the external logo is removed. A `Cadmium free' logo shall be used if concentration values of Cadmium (Cd) by weight in any homogeneous material part of the display do not exceed 0.01 % as defined in Directive 2011/65/EU(RoHS).
Labeling for Devices that contain natural rubber Reference US Code of Federal Regulations Title 21 Food and Drugs Subchapter H Medical Devices Part 801 Labeling Section 801.437 User Labeling for devices that contain natural rubber
Requirements This section applies to medical devices composed of or containing natural rubber that contacts humans. The term "natural rubber" includes natural rubber latex, dry natural rubber, and synthetic latex or synthetic rubber that contains natural rubber in its formulation.
Devices containing natural rubber latex that contacts humans shall be labeled prominently and legibly in bold print with:
PN 46G3772 Page 49 of 197 EC J85151 13MAY05
EC 899569 04NOV93 EC G32590 08FEB06
EC 899773 07DEC94 EC L04925B 11JAN07
EC F15040 25AUG97 EC L04925M 01AUG07
EC F73298 02SEP99 EC L04925N 19FEB08
EC F74336 05SEP00 EC L05962X 08AUG08
EC F72950 23JAN02 EC L79598 25FEB09
EC H64064 13MAY03 EC N24534E 02OCT09
EC H17205 29JUL03 EC L79598A 22FEB10
EC L79598B 22SEPT10
EC L79598C 27APR2011
EC L79598D 6SEPT2011
EC N31517Y 26MAR2012
ECN31946T 19APR2013
ECN33076 5DEC2013
ECN33076A 16MAY2014
ECN46883 17OCT2014
ECP02692 26MAY2015
ECO P02838 15OCT2015
ECOP17505 21APR2016
ECO P17633 1OCT2016
ECOP17764 20MAR2017
ECOP17905 16OCT2017
ECOP17958 Jan 25, 2018
ECOP44540 June 11, 2018
ECOP44680 Mar 5, 2019
ECOP44794 Aug 9, 2019
ECO P44877 15Feb2020
ECO P45188 1Sept2020
ECO P45272 9Mar2021
ECO P45379 18Oct2021
ECO 45443 4April2022
ECO P45475 14Nov2022
This document is the property of IBM. Its use is authorized only for responding to a request for quotation or for the performance of work for IBM. All questions must be referred to the IBM Procurement Department requesting the quotation or performance of work.
Engineering Specification
Page 50 of 197
"Caution: This Product Contains Natural Rubber Latex Which May Cause Allergic Reactions." This statement shall appear on all device labels, and other labeling, and shall appear on the principal display panel of the device packaging, the outside package, container or wrapper, and the immediate device package.
Devices containing dry natural rubber that contacts humans shall bear the following in bold print on the device: "This Product Contains Dry Natural Rubber." This statement shall appear on all device labels, and other labeling, and shall appear on the principal display panel of the device packaging, the outside package, container or wrapper, and the immediate device package.
Devices that contain natural rubber that contacts humans shall not contain the term "hypoallergenic" on their labeling.
See the regulation for more details and definitions.
2.3.2 Plastic Part Marking
This section applies to IBM logo Products and to Deliverables when those Deliverables are incorporated or integrated within an IBM logo Product. This section also applies to Electronic Displays, irrespective of the brand or logo. If a supplier has questions about whether this section applies to a particular Deliverable, they should consult their IBM Procurement representative. Electronic Displays, irrespective of the brand logo, must have plastic components marked in accordance with EU Regulation 2019/2021 laying down ecodesign requirements for electronic displays pursuant to Directive 2009/125/EC of the European Parliament and of the Council. See Section 2.12.1 in this specification or the regulation for definitions and more requirement details.
Plastic Parts molded and/or fabricated from thermoplastic materials and weighing 25 grams or more must be marked in accordance with the International Organization for Standardization's international standard ISO 11469 "PlasticsGeneric identification and marking of plastics products." Examples of the marking convention of ISO 11469 are listed in the following sections. Please see the standards for more details. Marking is optional for plastic Parts weighing less than 25 grams, however, all plastic Parts having adequate surface area for coding should be marked. Marking requirements do not apply to cable and cable assemblies, experimental tooling or to plastic Parts without adequate surface area for coding. Marking of protective packaging materials is not in the scope of this specification. See Section 1.5 for information concerning the location of packaging specifications.
For Electronic Displays (with a logo on it other than IBM), plastic components heavier than 50 grams must be marked by specifying the type of polymer with the appropriate standard symbols or abbreviated terms set between the punctuation marks `>' and `<' as specified in available standards. The marking shall be legible.
The following plastic components are exempt from marking requirements in the following circumstances: (i) the marking is not possible because of the shape or size; (ii) the marking would impact on the performance or functionality of the plastic component; and (iii) marking is technically not possible because of the molding method.
For the following plastic components in Electronic Displays no marking is required for: (i) packaging, tape, labels and stretch wraps; (ii) wiring, cables and connectors, rubber parts and anywhere not enough appropriate surface area is available for the marking to be of a legible size; (iii) PCB assemblies, PMMA boards, optical components, electrostatic discharge components, electromagnetic interference components, speakers; (iv) transparent parts where the marking would obstruct the function of the part in question.
Components containing flame retardants shall additionally be marked with the abbreviated term of the polymer followed by hyphen, then the symbol `FR' followed by the code number of the flame retardant in parentheses. The marking on the enclosure and stand components shall be clearly visible and readable.
PN 46G3772 Page 50 of 197 EC J85151 13MAY05
EC 899569 04NOV93 EC G32590 08FEB06
EC 899773 07DEC94 EC L04925B 11JAN07
EC F15040 25AUG97 EC L04925M 01AUG07
EC F73298 02SEP99 EC L04925N 19FEB08
EC F74336 05SEP00 EC L05962X 08AUG08
EC F72950 23JAN02 EC L79598 25FEB09
EC H64064 13MAY03 EC N24534E 02OCT09
EC H17205 29JUL03 EC L79598A 22FEB10
EC L79598B 22SEPT10
EC L79598C 27APR2011
EC L79598D 6SEPT2011
EC N31517Y 26MAR2012
ECN31946T 19APR2013
ECN33076 5DEC2013
ECN33076A 16MAY2014
ECN46883 17OCT2014
ECP02692 26MAY2015
ECO P02838 15OCT2015
ECOP17505 21APR2016
ECO P17633 1OCT2016
ECOP17764 20MAR2017
ECOP17905 16OCT2017
ECOP17958 Jan 25, 2018
ECOP44540 June 11, 2018
ECOP44680 Mar 5, 2019
ECOP44794 Aug 9, 2019
ECO P44877 15Feb2020
ECO P45188 1Sept2020
ECO P45272 9Mar2021
ECO P45379 18Oct2021
ECO 45443 4April2022
ECO P45475 14Nov2022
This document is the property of IBM. Its use is authorized only for responding to a request for quotation or for the performance of work for IBM. All questions must be referred to the IBM Procurement Department requesting the quotation or performance of work.
Engineering Specification
Page 51 of 197
Coding Method The marking shall be made by injection molding, stamping, or other means of permanently affixing the information in a readily visible area on non-decorative or nonfunctional surfaces. Marking in a readily visible area means that the marking can be seen on the disassembled plastic Parts. Use of labels with adhesives for coding Parts is not allowed. Notes: 1) When two or more resins may be used for production of a plastic Part, identification of the actual resin used for
fabrication is required.
2) If the plastic Parts must be plated or painted on the internal surface, it may not be possible to have a readily
visible injection molded-in marking. In such cases, it may be necessary to code the Parts with a stamp or other means of permanently affixing the information. If the Parts must be painted with a decorative paint, it must be
indicated on the internal surface with an appropriate means (for example, stamp) that the Part has been painted.
Symbol to Signify Recyclability To indicate that the plastic Material used for the fabrication of the Part is recyclable, the two symbols ">" and "<" (normally used to indicate greater than and less than) will be used. Marking with these symbols indicates that the Material which makes up the Part is recyclable. Note: The size of the symbol is optional as long as it is clearly legible.
Resin Generic Identification Resin identification will be marked on plastic Parts using the symbol for polymer type in between the symbols > and < as shown in the example of polycarbonate/ABS blend below.
> PC+ABS < The symbols for the plastic Materials shall be selected from Part 1 of international standard ISO 1043, PlasticsSymbols and abbreviated terms. Symbols of plastics not appearing in ISO 1043-1 shall be selected from ASTM D 4000, Classification System for Specifying Plastic Materials; and ASTM D 1600, Terminology Relating to Abbreviations, Acronyms and Codes for Terms Relating to Plastics. See table entitled "Commonly Used Resins" for typical examples.
Table 6. Commonly Used Resins Generic Family Name Polyamide Polycarbonate Poly(phenylene ether) Polymethylmethacrylate Polystyrene Polyvinyl chloride Acrylonitrile/Butadiene/Styrene Polycarbonate + Acrylonitrile/Butadiene/Styrene Polycarbonate with 10% glass fiber
Polymer Symbol PA PC PPE PMMA PS PVC ABS PC +ABS PC - GF10
When two or more resins may be used for production of a Part, identification of the actual resin used for fabrication
can be displayed by arrows. See table below for examples.
Table 7. Examples of Completed Plastic Part Markings
Example
Marking
Single material used in production of Part
> ABS-FR(17) <
Two or more generically different
Arrow points to actual material used in production.
materials allowed for production of Part
> ABS-FR(17) <
> PC + ABS FR(40) <
Additives identification shall be marked on plastic Parts using the generic symbols from the series of international standards ISO 1043-2, 1043-3 and 1043-4. For example, a blend of polycarbonate/ABS with halogen-free organic phosphate flame retardant compounds is marked with the following code:
> PC+ABS-FR (40) <
PN 46G3772 Page 51 of 197 EC J85151 13MAY05
EC 899569 04NOV93 EC G32590 08FEB06
EC 899773 07DEC94 EC L04925B 11JAN07
EC F15040 25AUG97 EC L04925M 01AUG07
EC F73298 02SEP99 EC L04925N 19FEB08
EC F74336 05SEP00 EC L05962X 08AUG08
EC F72950 23JAN02 EC L79598 25FEB09
EC H64064 13MAY03 EC N24534E 02OCT09
EC H17205 29JUL03 EC L79598A 22FEB10
EC L79598B 22SEPT10
EC L79598C 27APR2011
EC L79598D 6SEPT2011
EC N31517Y 26MAR2012
ECN31946T 19APR2013
ECN33076 5DEC2013
ECN33076A 16MAY2014
ECN46883 17OCT2014
ECP02692 26MAY2015
ECO P02838 15OCT2015
ECOP17505 21APR2016
ECO P17633 1OCT2016
ECOP17764 20MAR2017
ECOP17905 16OCT2017
ECOP17958 Jan 25, 2018
ECOP44540 June 11, 2018
ECOP44680 Mar 5, 2019
ECOP44794 Aug 9, 2019
ECO P44877 15Feb2020
ECO P45188 1Sept2020
ECO P45272 9Mar2021
ECO P45379 18Oct2021
ECO 45443 4April2022
ECO P45475 14Nov2022
This document is the property of IBM. Its use is authorized only for responding to a request for quotation or for the performance of work for IBM. All questions must be referred to the IBM Procurement Department requesting the quotation or performance of work.
Engineering Specification
Page 52 of 197
2.4 Additional Requirements for Batteries
2.4.1 Battery Content Restrictions
All batteries contained in Deliverables covered by ES 46G3772 shall meet the requirements of the table below. Table 8. Battery Content Restrictions
Battery Type
Restrictions
All Battery Types, including accumulators. (Some battery types have more restrictive substance levels; see following entries on this table.)
Nonremovable batteries or accumulators, unless the battery is nonremovable due to user safety or other principal purpose of the Deliverable Alkaline batteries
Alkaline zinc manganese dioxide
Alkaline manganese button cell battery with mercury added Lead Acid Sealed Mercuric oxide batteries
No intentionally introduced mercury 0.0005% mercury by weight in homogeneous materials1, 5, 11, 13, 15 0.001% cadmium by weight (Note the lower cadmium restrictions for
some battery types below.)1, 13
Only battery types which are exempted from all dangerous goods transport
regulations (surface and air), i.e., not classified as a dangerous good (for purposes of transport) can be used. Large lithium ion batteries (> 100 Wh) can be used for back-up power to servers. Refer to IBM Engineering Specification 92F6933 for these requirements or contact the IBM Hazardous Materials Transportation Coordinator.
0.0005% cadmium by weight 5 0.1% lead by weight 5 0.0005% mercury by weight 5
0.200% lead by weight 16
0.001% cadmium by weight 16
0.0001% mercury by weight 16
0.001% cadmium 4, 6
0.004% lead 2, 6, 9
0.0001% mercury 2, 6, 9
Prohibited. 7
Must be classified as non-spillable and meet the requirements of US Code of Federal Regulation, 49 CFR 173.159a and IATA Special Provision A67. Prohibited 7
Nickel Cadmium (Ni-Cd)
Prohibited. 1
Silver oxide mercury added button cell
Prohibited. 7
batteries, including silver oxide button cell
batteries designated SR357, SR364, R371,
SR377 and SR395
Zinc-air button cell battery with mercury Prohibited. 7, 8
added
Zinc carbon
0.200% lead by weight 2
0.001% cadmium by weight 4, 16
0.0001% mercury by weight 3
Zinc silver oxide, zinc air and zinc manganese dioxide button batteries
Prohibited 12 < 0.005 mg/g mercury 10
Non-alkaline zinc manganese dioxide
< 0.001% cadmium 4, 6, 9
0.100% lead 2, 6
0.0001% mercury 2, 6
Note - the regulations cited below are only a sample of the regulations pertaining to batteries. They are provided for example purposes only. 1 EU Directive 2006/66/EC of the European Parliament and of the Council of 6 September 2006 on batteries and accumulators and waste batteries
and accumulators. 2 Argentina National Legislature Act 26.184 on the manufacturing, assembly and importing of batteries. 3 New York Battery Reduction and Elimination. New York State Consolidated Laws. Environmental Conservation
PN 46G3772 Page 52 of 197 EC J85151 13MAY05
EC 899569 04NOV93 EC G32590 08FEB06
EC 899773 07DEC94 EC L04925B 11JAN07
EC F15040 25AUG97 EC L04925M 01AUG07
EC F73298 02SEP99 EC L04925N 19FEB08
EC F74336 05SEP00 EC L05962X 08AUG08
EC F72950 23JAN02 EC L79598 25FEB09
EC H64064 13MAY03 EC N24534E 02OCT09
EC H17205 29JUL03 EC L79598A 22FEB10
EC L79598B 22SEPT10
EC L79598C 27APR2011
EC L79598D 6SEPT2011
EC N31517Y 26MAR2012
ECN31946T 19APR2013
ECN33076 5DEC2013
ECN33076A 16MAY2014
ECN46883 17OCT2014
ECP02692 26MAY2015
ECO P02838 15OCT2015
ECOP17505 21APR2016
ECO P17633 1OCT2016
ECOP17764 20MAR2017
ECOP17905 16OCT2017
ECOP17958 Jan 25, 2018
ECOP44540 June 11, 2018
ECOP44680 Mar 5, 2019
ECOP44794 Aug 9, 2019
ECO P44877 15Feb2020
ECO P45188 1Sept2020
ECO P45272 9Mar2021
ECO P45379 18Oct2021
ECO 45443 4April2022
ECO P45475 14Nov2022
This document is the property of IBM. Its use is authorized only for responding to a request for quotation or for the performance of work for IBM. All questions must be referred to the IBM Procurement Department requesting the quotation or performance of work.
Engineering Specification
Page 53 of 197
4 Austrian Battery Ordinances 514/1990, as amended by BGB1 No. 3/1991(4 January 1991) and BGB1.II Nol. 495/1999 (28 December 1999) of the Ordinance of Federal Ministry for Environment, Youth and Family. 5 Switzerland Ordinance on Risk Reduction related to the Use of certain particularly dangerous Substances, Preparations and Articles. 6 Brazil Resolution Number 401 of November 4, 2008 Batteries. 7 Maine Act Concerning Mercury-added Button Cell Batteries. 8 2011 Wisconsin Act 201 relating to zinc air button cell batteries 9 GB 24427-2009 Limitation of mercury, cadmium and lead contents for alkaline and non-alkaline zinc manganese dioxide batteries. National Standards of the People's Republic of China 10 GB 24428-2009 Limitation of mercury contents for zinc silver oxide, zinc air and zinc manganese dioxide button batteries. National Standards of the People's Republic of China 11 Canada Products Containing Mercury Regulations SOR/2014-254 12 Japan Act on Preventing Environmental Pollution of Mercury 13 Ecuador Technical Regulations RTE INEN 105 (1R) Cells and Batteries, Primary and Secondary 14 Columbia Decree 2133-2016 Control measures for the importation and commercialization of mercury and the products that contain it 15 EU Regulation 2017/852 of 17 May 2017 on mercury 16 Columbia Resolution Number 0172 Technical Regulation No 0172 of January 23, 2012.
2.4.2 Product Design, Management Plans, and Labeling Requirements for Batteries
All batteries contained in Deliverables covered by ES 46G3772 shall be designed for easy identification and removal. Data (safety data sheets for all batteries, plus UN38.3 test reports for lithium batteries) used to classify batteries as nonhazardous in transport must be supplied to IBM as specified in 92F6933. For further information on this, please contact the IBM Hazardous Materials Transportation Coordinator.
Suppliers of Deliverables with lead acid batteries must provide IBM with a Material Safety Data Sheet (MSDS) which is current, e.g., less than 3 years old, and conforms to US Occupational Safety and Health Administration requirements in 29 Code of Federal Register 1910. A copy of this MSDS must accompany lead acid batteries which ship to an IBM customer, including end use customers, Business Partners, and OEM customers. The MSDS must also be available upon request in Spanish.
Battery manufacturers must comply with Battery Management Plans as required by multiple jurisdictions, including, but not limited to those listed in the Table below. These jurisdictions may require test reports or certificates of conformance confirming substance restriction compliance, including certificate that no additional mercury has been added. IBM Procurement may request written documentation from a Supplier verifying compliance and upon such request; Supplier must provide this compliance documentation within two business days. The table below briefly outlines some battery management plan requirements by jurisdiction for batteries sold for commercial, industrial or business applications. The list is not all-inclusive.
Table 9. Limited Summary of Battery Management Plan Requirements by Jurisdiction
Jurisdiction
Battery type requiring management plan
Brazil
Lead acid, nickel cadmium, mercury oxide, alkaline manganese and zinc manganese.
Costa Rica
Lead acid, nickel cadmium, batteries with mercury
Ecuador
EU Countries, Israel, Norway, Switzerland, Taiwan, and Turkey Florida
Maine
Primary batteries: mercury oxide batteries Secondary batteries: nickel-cadmium, nickel-metal hydride, nickel-iron, and lithium-ion batteries All.
Rechargeable nickel-cadmium or sealed lead-acid batteries, weighing less than 25 pounds excluding those used for memory backup. Mercuric oxide, nickel-cadmium or sealed lead acid battery.
Maryland
Nickel-cadmium or lead acid batteries.
Minnesota
Rechargeable batteries. Mercuric oxide, silver oxide, nickel cadmium or sealed lead acid batteries.
PN 46G3772 Page 53 of 197 EC J85151 13MAY05
EC 899569 04NOV93 EC G32590 08FEB06
EC 899773 07DEC94 EC L04925B 11JAN07
EC F15040 25AUG97 EC L04925M 01AUG07
EC F73298 02SEP99 EC L04925N 19FEB08
EC F74336 05SEP00 EC L05962X 08AUG08
EC F72950 23JAN02 EC L79598 25FEB09
EC H64064 13MAY03 EC N24534E 02OCT09
EC H17205 29JUL03 EC L79598A 22FEB10
EC L79598B 22SEPT10
EC L79598C 27APR2011
EC L79598D 6SEPT2011
EC N31517Y 26MAR2012
ECN31946T 19APR2013
ECN33076 5DEC2013
ECN33076A 16MAY2014
ECN46883 17OCT2014
ECP02692 26MAY2015
ECO P02838 15OCT2015
ECOP17505 21APR2016
ECO P17633 1OCT2016
ECOP17764 20MAR2017
ECOP17905 16OCT2017
ECOP17958 Jan 25, 2018
ECOP44540 June 11, 2018
ECOP44680 Mar 5, 2019
ECOP44794 Aug 9, 2019
ECO P44877 15Feb2020
ECO P45188 1Sept2020
ECO P45272 9Mar2021
ECO P45379 18Oct2021
ECO 45443 4April2022
ECO P45475 14Nov2022
This document is the property of IBM. Its use is authorized only for responding to a request for quotation or for the performance of work for IBM. All questions must be referred to the IBM Procurement Department requesting the quotation or performance of work.
Engineering Specification
Page 54 of 197
Table 9. Limited Summary of Battery Management Plan Requirements by Jurisdiction
Jurisdiction
Battery type requiring management plan
New Jersey Vermont
Mercuric oxide, nickel cadmium, sealed lead rechargeable, alkaline manganese, lithium, silver oxide, zinc-air, and zinc-carbon batteries. Any button, coin, cylindrical, rectangular or other shaped battery consisting of two or more cells composed of lead, lithium, manganese, mercury, mercuric oxide, silver oxide, cadmium, zinc, copper, or other metals. Mercuric oxide, nickel-cadmium, or sealed lead acid.
Note: The list of requirements in this table is not all inclusive of all legally mandated Battery Management Plan requirements.
All Batteries shall have appropriate labels affixed, including but not limited to: 1. Battery type and chemistry (IEC standard name is acceptable for button cells, e.g., CR2032, BR1225, see IEC
60086-2), 2. Manufacturer name, 3. Capacity rating on all batteries with the exception of coin cell
a.All batteries must have capacity displayed in Ah on a label with a minimum label size of 1 mm x 5 mm, b.Lithium-ion batteries also require the specific marking format of Wh, see IBM ES 92F6933, and 4. Other markings, hazard warnings, and information as required by applicable laws and regulations.
Battery labels or markings must be printed visibly, legibly and indelibly. The battery marking shall be located on or adjacent to each battery unless otherwise noted in this Section. Deliverables containing batteries that are not readily identifiable must be clearly labeled on the exterior to indicate the presence of a battery inside. In battery packs, individual cells may be labeled (in cases where multiple manufacturers or chemistries cannot clearly be identified using a single label for the pack) or one label may be used for the pack.
Batteries and batteries in Deliverables must meet the requirements in this and the following sections. These requirements must be met irrespective of the jurisdiction where the Deliverable is transferred to IBM.
Requirements for the EU, Brazil, Macedonian, Turkey, and multiple other jurisdictions
Instructions must be provided in the Product or Part hardware publications, showing how batteries can be removed safely by either the customer or a qualified professional and informing the customer of the type of battery in the Deliverable. These instructions must accompany the product, if not, a reference to the web location of the removal instructions must accompany the product.
A mark indicating separate collection must be printed on all batteries or accumulators see the figure in this section. The mark must (1) consist of a crossed-out wheeled bin container; (2) cover at least 3% of the area of the largest side of the battery, accumulator or battery pack, up to a maximum size of 5 cm x 5 cm; (3) for cylindrical cells, the symbol should cover at least 1.5% of the surface area of the battery or accumulator, and shall have a maximum size of 5 cm x 5 cm; and (4) where the mark would be smaller than 0.5 cm x 0.5 cm, the battery, accumulator or battery pack need not be marked but a symbol measuring at least 1 cm x 1 cm must be printed on the package. Refer to IBM Engineering Specification 5897661 "Recyclable Packaging Materials" for more details about the marking on the packaging if required.
In addition to the above, batteries and accumulators containing heavy metals must be marked with specific symbols for heavy metal content: Hg for mercury content greater than 0.0005% mercury; Cd for cadmium content greater than 0.002% cadmium; Pb for lead content greater than 0.004% lead. These symbols must be printed beneath the separate collection mark and must cover an area at least 1/4 of the size of the symbol.
PN 46G3772 Page 54 of 197 EC J85151 13MAY05
EC 899569 04NOV93 EC G32590 08FEB06
EC 899773 07DEC94 EC L04925B 11JAN07
EC F15040 25AUG97 EC L04925M 01AUG07
EC F73298 02SEP99 EC L04925N 19FEB08
EC F74336 05SEP00 EC L05962X 08AUG08
EC F72950 23JAN02 EC L79598 25FEB09
EC H64064 13MAY03 EC N24534E 02OCT09
EC H17205 29JUL03 EC L79598A 22FEB10
EC L79598B 22SEPT10
EC L79598C 27APR2011
EC L79598D 6SEPT2011
EC N31517Y 26MAR2012
ECN31946T 19APR2013
ECN33076 5DEC2013
ECN33076A 16MAY2014
ECN46883 17OCT2014
ECP02692 26MAY2015
ECO P02838 15OCT2015
ECOP17505 21APR2016
ECO P17633 1OCT2016
ECOP17764 20MAR2017
ECOP17905 16OCT2017
ECOP17958 Jan 25, 2018
ECOP44540 June 11, 2018
ECOP44680 Mar 5, 2019
ECOP44794 Aug 9, 2019
ECO P44877 15Feb2020
ECO P45188 1Sept2020
ECO P45272 9Mar2021
ECO P45379 18Oct2021
ECO 45443 4April2022
ECO P45475 14Nov2022
This document is the property of IBM. Its use is authorized only for responding to a request for quotation or for the performance of work for IBM. All questions must be referred to the IBM Procurement Department requesting the quotation or performance of work.
Engineering Specification
Page 55 of 197
Pb
Figure 1. Collection and heavy metal content marking for a lead acid battery.
See previous section for capacity rating labeling requirements.
Batteries shall be tested as required in Turkey Announcement 2009/15 by a Turkey accredited laboratory. The analysis shall show compliance of the battery to the substance restrictions in the Turkey Regulation for Used Batteries and Accumulators, Number 25569 for mercury and cadmium. The analysis shall be completed and dated within six months of submittal to IBM.
Requirements for the United States
In the United States, the Mercury-Containing and Rechargeable Battery Management Act (Public Law 104-142) establishes national, uniform labeling requirements for rechargeable batteries, such as nickel-cadmium, nickel metal hydride, lithium ion, small sealed lead acid batteries, and products containing these regulated batteries as a primary energy supply. Products that include an internal uninterrupted power supply (UPS) device are exempt. Regulated batteries must display three chasing arrows, or a comparable recycling symbol and the text indicated in the table below for the respective regulated items. No size or color requirements for the recycling symbol are specified in the regulation. EPA publication EPA530-K-97-009, "Implementation of the Mercury-Containing and Rechargeable Battery Management Act" depicts the three chasing arrows symbol shown in figure below.
Figure 2. Three chasing arrows symbol from the U.S. Battery Management Act
The required labeling must appear on the packaging of the Products containing regulated batteries that are not easily removable, and on the packaging of regulated batteries that are sold separately from such Products, if the labeling on the Product or battery is not visible through the packaging.
Table 10. Text for Battery Marking for the U.S. Battery Management Act
Regulated Item
Text
Nickel-cadmium batteries*
Nickel-cadmium or Ni-Cd with the phrase
"BATTERY MUST BE RECYCLED OR DISPOSED OF PROPERLY"
Lead acid batteries
Pb or the words "LEAD," "RETURN," and "RECYCLE", and if the batteries
are sealed, the phrase "BATTERY MUST BE RECYCLED."
Products containing regulated lead-acid
"CONTAINS SEALED LEAD BATTERY. BATTERY MUST BE
batteries that are not easily removable
RECYCLED."
Product containing Ni-Cd batteries that are "CONTAINS NICKEL-CADMIUM BATTERY. BATTERY MUST BE
not easily removable
RECYCLED OR DISPOSED OF PROPERLY."
* Nickel cadmium batteries are prohibited from use in Deliverables covered by this specification. See Table 8.
California - In California, certain coin or button cell lithium manganese dioxide batteries may require a label or flyer. Lithium manganese dioxide batteries containing perchlorate substances must either be: 1. Clearly labeled on the exterior of the shipping package, or
PN 46G3772 Page 55 of 197 EC J85151 13MAY05
EC 899569 04NOV93 EC G32590 08FEB06
EC 899773 07DEC94 EC L04925B 11JAN07
EC F15040 25AUG97 EC L04925M 01AUG07
EC F73298 02SEP99 EC L04925N 19FEB08
EC F74336 05SEP00 EC L05962X 08AUG08
EC F72950 23JAN02 EC L79598 25FEB09
EC H64064 13MAY03 EC N24534E 02OCT09
EC H17205 29JUL03 EC L79598A 22FEB10
EC L79598B 22SEPT10
EC L79598C 27APR2011
EC L79598D 6SEPT2011
EC N31517Y 26MAR2012
ECN31946T 19APR2013
ECN33076 5DEC2013
ECN33076A 16MAY2014
ECN46883 17OCT2014
ECP02692 26MAY2015
ECO P02838 15OCT2015
ECOP17505 21APR2016
ECO P17633 1OCT2016
ECOP17764 20MAR2017
ECOP17905 16OCT2017
ECOP17958 Jan 25, 2018
ECOP44540 June 11, 2018
ECOP44680 Mar 5, 2019
ECOP44794 Aug 9, 2019
ECO P44877 15Feb2020
ECO P45188 1Sept2020
ECO P45272 9Mar2021
ECO P45379 18Oct2021
ECO 45443 4April2022
ECO P45475 14Nov2022
This document is the property of IBM. Its use is authorized only for responding to a request for quotation or for the performance of work for IBM. All questions must be referred to the IBM Procurement Department requesting the quotation or performance of work.
Engineering Specification
Page 56 of 197
2. Have included with the Deliverable a shipping document or package insert. The label or the insert must have the following statements, "Perchlorate Material - special handling may apply. See http://www.dtsc.ca.gov/hazardouswaste/perchlorate/." The following must also be included on the label or insert for IBM logo Products or Deliverables incorporated within an IBM logo Product, "The foregoing notice is provided in accordance with California Code of Regulations Title 22, Division 4.5 Chapter 33. Best Management Practices for Perchlorate Materials. This product/part includes a lithium manganese dioxide battery which contains a perchlorate substance."
Wisconsin Manufacturers of zinc air button cell batteries must certify to the State of Wisconsin that the battery contains no mercury that was intentionally introduced.
Requirements for China
The China Regulation on Mercury Content Limitation for Batteries requires all domestically manufactured and imported alkaline zinc-manganese and zinc-manganese batteries sold in China to be marked to indicate mercury content using Chinese characters equivalent to "low mercury" (if the mercury content is less than 0.025% of the weight of the battery) or "mercury free" (if the mercury content is less than 0.0001% of the weight of the battery).
China Management Methods for Controlling Pollution by Electronic Information Products, Ministry of Information Industry (MII) Order #39 requires a Mark logo on all batteries except lead acid batteries and on batteries where due to size and function the battery may not be able to be labeled. Button and coin cell batteries are examples of batteries which may not be able to be labeled with a Mark logo. See Section 2.9 for more information in regard to labeling batteries with a China Mark logo. In the case where batteries cannot be labeled due to size or function restrictions, the battery must be listed on the Hazardous Substance Table, see Section 2.9 for details. An example China Mark logo for a battery can be found in the following Figure.
Figure 3. Example of China Mark Logo for batteries.
Requirements for Taiwan
All dry cell batteries sold in Taiwan are required to have the "Four-in-One" recycling symbol and the words, in Chinese characters, which interpreted mean "Please recycle batteries." See Figure below. The "Four-in-One" recycling symbol must be printed in any solid color (monotone), must be square in shape with each side not smaller than 0.5 cm in packaging and 1.5 cm in user manuals and product literature. The recycle symbol and words should be placed in one of the following locations only, using this order of priority: 1) on the battery, 2) as close to the battery as possible, 3) on the cardboard packaging of the field replaceable unit (FRU), 4) on a flyer that goes with the battery, 5) on the Product containing the battery, or 6) the symbol and words should appear in hardware
manuals.
Figure 4. Four-in-One recycling symbol and words for Taiwan
Requirements for Japan
Rechargeable sealed lead acid, nickel cadmium, nickel metal hydride, and lithium ion batteries sold inside Japan shall be labeled according to Ordinance No. 95 of the Ministry of Economy, Trade, and Industry under the Law for the Promotion of the Effective Utilization of Resources (Law No. 48, 1993 as amended, 2001). These requirements are summarized in the Tables and Forms below. Sealed lead acid batteries with greater than 234,000 coulombs charge and small coin type rechargeable batteries that are contained inside Products are exempted from the special Japanese labeling requirements of this section.
PN 46G3772 Page 56 of 197 EC J85151 13MAY05
EC 899569 04NOV93 EC G32590 08FEB06
EC 899773 07DEC94 EC L04925B 11JAN07
EC F15040 25AUG97 EC L04925M 01AUG07
EC F73298 02SEP99 EC L04925N 19FEB08
EC F74336 05SEP00 EC L05962X 08AUG08
EC F72950 23JAN02 EC L79598 25FEB09
EC H64064 13MAY03 EC N24534E 02OCT09
EC H17205 29JUL03 EC L79598A 22FEB10
EC L79598B 22SEPT10
EC L79598C 27APR2011
EC L79598D 6SEPT2011
EC N31517Y 26MAR2012
ECN31946T 19APR2013
ECN33076 5DEC2013
ECN33076A 16MAY2014
ECN46883 17OCT2014
ECP02692 26MAY2015
ECO P02838 15OCT2015
ECOP17505 21APR2016
ECO P17633 1OCT2016
ECOP17764 20MAR2017
ECOP17905 16OCT2017
ECOP17958 Jan 25, 2018
ECOP44540 June 11, 2018
ECOP44680 Mar 5, 2019
ECOP44794 Aug 9, 2019
ECO P44877 15Feb2020
ECO P45188 1Sept2020
ECO P45272 9Mar2021
ECO P45379 18Oct2021
ECO 45443 4April2022
ECO P45475 14Nov2022
This document is the property of IBM. Its use is authorized only for responding to a request for quotation or for the performance of work for IBM. All questions must be referred to the IBM Procurement Department requesting the quotation or performance of work.
Engineering Specification
Page 57 of 197
Table 11. Battery Label Requirements for Japan
Class of the Specified Labeled Product
Sealed lead storage batteries not covered by using plastic or other materials and sealed lead storage batteries covered by using plastic or other materials with height of less than 10mm Sealed lead storage batteries covered by using plastic or other materials with height of 10mm or more Sealed alkaline storage batteries (limited to sealed nickel-cadmium storage batteries. The same will apply in this item and the next item.) not covered by using plastic or other materials and sealed alkaline storage batteries covered by using plastic or other materials with height of less than 10mm Sealed alkaline storage batteries covered by using plastic or other materials with height of 10mm or more Sealed alkaline storage batteries (limited to sealed nickel-hydrogen storage batteries. The same will apply in this item and the next item.) not covered by using plastic or other materials and sealed alkaline storage batteries covered by using plastic or other materials with height of less than 10mm Sealed alkaline storage batteries covered by using plastic or other materials with height of 10mm or more
Lithium storage batteries not covered by using plastic or other materials and lithium storage batteries covered by using plastic or other materials with height of less than 10mm Sealed lithium storage batteries covered by using plastic or other materials with height of 10mm or more
* Forms appear below.
Form* Form 1 Form 2 Form 3
Form 4 Form 5
Form 6 Form 7 Form 8
PN 46G3772 Page 57 of 197 EC J85151 13MAY05
EC 899569 04NOV93 EC G32590 08FEB06
EC 899773 07DEC94 EC L04925B 11JAN07
EC F15040 25AUG97 EC L04925M 01AUG07
EC F73298 02SEP99 EC L04925N 19FEB08
EC F74336 05SEP00 EC L05962X 08AUG08
EC F72950 23JAN02 EC L79598 25FEB09
EC H64064 13MAY03 EC N24534E 02OCT09
EC H17205 29JUL03 EC L79598A 22FEB10
EC L79598B 22SEPT10
EC L79598C 27APR2011
EC L79598D 6SEPT2011
EC N31517Y 26MAR2012
ECN31946T 19APR2013
ECN33076 5DEC2013
ECN33076A 16MAY2014
ECN46883 17OCT2014
ECP02692 26MAY2015
ECO P02838 15OCT2015
ECOP17505 21APR2016
ECO P17633 1OCT2016
ECOP17764 20MAR2017
ECOP17905 16OCT2017
ECOP17958 Jan 25, 2018
ECOP44540 June 11, 2018
ECOP44680 Mar 5, 2019
ECOP44794 Aug 9, 2019
ECO P44877 15Feb2020
ECO P45188 1Sept2020
ECO P45272 9Mar2021
ECO P45379 18Oct2021
ECO 45443 4April2022
ECO P45475 14Nov2022
This document is the property of IBM. Its use is authorized only for responding to a request for quotation or for the performance of work for IBM. All questions must be referred to the IBM Procurement Department requesting the quotation or performance of work.
Engineering Specification
Page 58 of 197
Requirements for Brazil
Lead acid, nickel cadmium, mercury oxide, alkaline manganese, and zinc manganese batteries or accumulators shall be labeled in accordance to the requirements for the European Union, see previous section for the EU. In addition, these batteries must be clearly and indelibly labeled in Brazilian Portuguese with the following information:
Identification of the importer and manufacturer, Warning about risks to human health and the environment, and Requirement to return the battery, after use, to the reseller, manufacturer, or importer.
IBM logo products may use label part number 46T8771 for this requirement. If there is insufficient space on the batteries to put the above information, then this information must be on the packaging and in the product manual. Shipping the latest version of the IBM Environmental Notices and User Guide (ENUG), Z125-5823, with the product or part with the battery will meet the product manual requirements. See Section 2.10 for additional information about the ENUG.
The manufacturer of these batteries must:
Register in the Brazil Federal Technical Register of Activities that are Potentially Contaminating or that Use
Environmental Resources.
Test the batteries in accordance to Chapter 1, Section 3 of Brazil Resolution Number 401 of November 4, 2008
(and Article 3 of Brazil Normative Instruction (NI) No. 8) at an in-country (Brazil) INMETRO accredited laboratory. The testing results must be submitted annually to IBM, the Brazil National Institute of Metrology and Standards (INMETRO), and the Brazil Institute of the Environment and Renewable Natural Resources (IBAMS). Please note this testing requirement applies only to lead acid, zinc manganese and alkaline manganese batteries and accumulators only. (This testing also applies to nickel cadmium and mercury oxide batteries which are not allowed in IBM products.)
Submit a battery management plan to the required Brazil environmental agency (IBAMA).
PN 46G3772 Page 58 of 197 EC J85151 13MAY05
EC 899569 04NOV93 EC G32590 08FEB06
EC 899773 07DEC94 EC L04925B 11JAN07
EC F15040 25AUG97 EC L04925M 01AUG07
EC F73298 02SEP99 EC L04925N 19FEB08
EC F74336 05SEP00 EC L05962X 08AUG08
EC F72950 23JAN02 EC L79598 25FEB09
EC H64064 13MAY03 EC N24534E 02OCT09
EC H17205 29JUL03 EC L79598A 22FEB10
EC L79598B 22SEPT10
EC L79598C 27APR2011
EC L79598D 6SEPT2011
EC N31517Y 26MAR2012
ECN31946T 19APR2013
ECN33076 5DEC2013
ECN33076A 16MAY2014
ECN46883 17OCT2014
ECP02692 26MAY2015
ECO P02838 15OCT2015
ECOP17505 21APR2016
ECO P17633 1OCT2016
ECOP17764 20MAR2017
ECOP17905 16OCT2017
ECOP17958 Jan 25, 2018
ECOP44540 June 11, 2018
ECOP44680 Mar 5, 2019
ECOP44794 Aug 9, 2019
ECO P44877 15Feb2020
ECO P45188 1Sept2020
ECO P45272 9Mar2021
ECO P45379 18Oct2021
ECO 45443 4April2022
ECO P45475 14Nov2022
This document is the property of IBM. Its use is authorized only for responding to a request for quotation or for the performance of work for IBM. All questions must be referred to the IBM Procurement Department requesting the quotation or performance of work.
Engineering Specification
Page 59 of 197
Include in the packaging, in Brazilian Portuguese, information about the symbols, warnings on the risks to
human health and the environment, and the necessity to return the battery after use to the reseller, manufacturer or importer.
Requirements for Ecuador
Mercuric-oxide, nickel-cadmium, nickel-metal hydride and nickel-iron batteries shipping individually, not incorporated into a product or part, must be labeled with the following: "ADVERTENCIA La pila usada es un desecho peligroso para la salud y el ambiente. La pilas usadas deberán devolverse al momento de adquirir una nueva."
This translates to "WARNING Waste batteries are a hazardous waste for the health and environment. Waste batteries shall be returned at the time to buy new ones." IBM may request usage of IBM label part number 00FX701 for this warning. The label may be on the battery itself or on the packaging.
Requirements for alkaline and non-alkaline zinc manganese dioxide batteries
Requirements for the People's Republic of China Reference GB 24427-2009 National Standards of the People's Republic of China. Limitation of mercury, cadmium, and lead contents for alkaline and non-alkaline zinc manganese dioxide batteries.
Alkaline and non-alkaline zinc manganese dioxide batteries (excluding button batteries) must be labeled with the following:
a. Model type; b. Production year and month and validation, or recommended time of expiration; c. Positive and negative contact; d. Nominal voltage; e. Name and address of the manufacturer or supplier; f. Trademark; g. Code number of the standard followed; h. Notification of safe use (warning notice); i. Mercury content ("low mercury" or "mercury free"), in Chinese characters. B, e, g, h and i above can be marked on the package.
Method GB/T 20155-2006 is used to determine mercury, cadmium, and lead content in these batteries.
Reference GB 24427-2009 National Standards of the People's Republic of China. Limitation of mercury contents for zinc silver oxide, zinc air and zinc manganese dioxide button batteries.
Zinc silver oxide, zinc air and zinc manganese dioxide button batteries must be labeled with the following: a. Model type; b. Production year and month and validation, or recommended time of expiration; c. Positive and negative contact; d. Nominal voltage; e. Name and address of the manufacturer or supplier; f. Trademark; g. Code number of the standard followed; h. Notification of safe use (warning notice); i. Caution of preventing accidental swallowing; j. Mercury content ("low mercury" or "mercury free"), in Chinese characters. A and c above must be marked on the battery. B, d, e, g, h, i and j above can be marked on the package.
PN 46G3772 Page 59 of 197 EC J85151 13MAY05
EC 899569 04NOV93 EC G32590 08FEB06
EC 899773 07DEC94 EC L04925B 11JAN07
EC F15040 25AUG97 EC L04925M 01AUG07
EC F73298 02SEP99 EC L04925N 19FEB08
EC F74336 05SEP00 EC L05962X 08AUG08
EC F72950 23JAN02 EC L79598 25FEB09
EC H64064 13MAY03 EC N24534E 02OCT09
EC H17205 29JUL03 EC L79598A 22FEB10
EC L79598B 22SEPT10
EC L79598C 27APR2011
EC L79598D 6SEPT2011
EC N31517Y 26MAR2012
ECN31946T 19APR2013
ECN33076 5DEC2013
ECN33076A 16MAY2014
ECN46883 17OCT2014
ECP02692 26MAY2015
ECO P02838 15OCT2015
ECOP17505 21APR2016
ECO P17633 1OCT2016
ECOP17764 20MAR2017
ECOP17905 16OCT2017
ECOP17958 Jan 25, 2018
ECOP44540 June 11, 2018
ECOP44680 Mar 5, 2019
ECOP44794 Aug 9, 2019
ECO P44877 15Feb2020
ECO P45188 1Sept2020
ECO P45272 9Mar2021
ECO P45379 18Oct2021
ECO 45443 4April2022
ECO P45475 14Nov2022
This document is the property of IBM. Its use is authorized only for responding to a request for quotation or for the performance of work for IBM. All questions must be referred to the IBM Procurement Department requesting the quotation or performance of work.
Engineering Specification
Page 60 of 197
Method GB/T 20155-2006 is used to determine mercury, cadmium, and lead content in these batteries.
2.5 Requirement for Decorative Metal Finishing
This section applies only to IBM logo Products and Deliverables when those Deliverables are incorporated or integrated within an IBM logo Product. If a Supplier has questions about whether this section applies to a particular Deliverable, they should consult their IBM Procurement representative.
The decorative metal finishing of IBM logo hardware Products is required to be achieved using powder coatings. Decorative metal Parts and OEM Products with decorative metal housings must use powder coating. Exceptions to this requirement are applications where production volumes do not justify using the powder coating process; a unique color, texture, or "feel" (e.g., soft-touch) is specified; or conductive (e.g., electrostatic discharge (ESD), electromagnetic compatibility (EMC)) functional coatings are required.
2.6 Requirements for Parts and Products Containing Mercury
Mercury containing components are prohibited in IBM Deliverables. New parts or products releasing after October 2014 can no longer have mercury containing Cold Cathode Fluorescent Lamps (CCFLs) (e.g., in Liquid Crystal Displays (LCDs)). For parts or products released before that date, the use of a mercury-containing CCFL must be reported to your IBM procurement representative to ensure that the applicable legal requirements are met for Products containing mercury in CCFLs. IBM Procurement will request information about the length of the fluorescent tube, as this determines the level of mercury allowed. All Parts or Products containing mercury and the packaging for the Part or Product must be labeled in English and/or French Canadian for certain U.S. State and Canada laws which require appropriate text indicating that mercury is present in the Part or Product and that the item must be disposed of in accordance with local regulations and requirements. This label must also be on any replacement parts and the packaging for the replacement parts which contain these mercury-containing components. Additionally, appropriate text must be added to user and service manuals for mercury-added Products indicating which Product components contain mercury and directing the Product owner to dispose of the Product per local regulations.
The table below provides a list of Information Technology Product categories that were known to contain mercury, and provides requirements for label wording, font size, and user manual text. Labels and manual text for Product categories not listed in the table below must be reviewed and approved by the IBM procurement representative.
PN 46G3772 Page 60 of 197 EC J85151 13MAY05
EC 899569 04NOV93 EC G32590 08FEB06
EC 899773 07DEC94 EC L04925B 11JAN07
EC F15040 25AUG97 EC L04925M 01AUG07
EC F73298 02SEP99 EC L04925N 19FEB08
EC F74336 05SEP00 EC L05962X 08AUG08
EC F72950 23JAN02 EC L79598 25FEB09
EC H64064 13MAY03 EC N24534E 02OCT09
EC H17205 29JUL03 EC L79598A 22FEB10
EC L79598B 22SEPT10
EC L79598C 27APR2011
EC L79598D 6SEPT2011
EC N31517Y 26MAR2012
ECN31946T 19APR2013
ECN33076 5DEC2013
ECN33076A 16MAY2014
ECN46883 17OCT2014
ECP02692 26MAY2015
ECO P02838 15OCT2015
ECOP17505 21APR2016
ECO P17633 1OCT2016
ECOP17764 20MAR2017
ECOP17905 16OCT2017
ECOP17958 Jan 25, 2018
ECOP44540 June 11, 2018
ECOP44680 Mar 5, 2019
ECOP44794 Aug 9, 2019
ECO P44877 15Feb2020
ECO P45188 1Sept2020
ECO P45272 9Mar2021
ECO P45379 18Oct2021
ECO 45443 4April2022
ECO P45475 14Nov2022
This document is the property of IBM. Its use is authorized only for responding to a request for quotation or for the performance of work for IBM. All questions must be referred to the IBM Procurement Department requesting the quotation or performance of work.
Engineering Specification
Page 61 of 197
Table 12. Mercury Added Product Labeling Information - US
Product Mercury Type Location
Mercury Amount Product and Part Label Requirements *
Flat Panel Fluorescent Display lamp in
display module
Tape Library
Fluorescent lamp in display module
Displays range Label Wording - "This
from 15 to 20
product contains a cathode
inches. Varies with fluorescent lamp which
the number of
contains mercury. Please
bulbs. Each bulb refer to user manual or
has < 3.5 mg of follow local ordinances or
mercury.
regulations for disposal of
Mercury amount this machine."
per product ranges Label Location - rear panel
from less than 10 of product.
mg to less than 30 Label Construction - Per
mg. See Table 1 requirements of UL 969
for mercury
Standard, "Marking and
restrictions per Labeling Systems."
lamp.
Minimum Capital Letter
Text Height - 3.53mm.**
Less than 4.0 mg Label Wording - "This
per product. See product contains a cathode
Table 1 for
fluorescent lamp which
mercury
contains mercury. Please
restrictions per refer to user manual or
lamp.
follow local ordinances or
regulations for disposal of
this machine."
Label Location - rear panel
of product
Label Construction - Per
requirements of UL 969
Standard, "Marking and
Labeling Systems."
Minimum Capital Letter
Text Height - 3.53mm.**
Product and
User / Service Manual
Replacement Part
Requirements
Package Label
Requirements *
Label Wording - This Statement Wording -
product contains a
"The fluorescent lamp
cathode fluorescent lamp in the liquid crystal
which contains mercury. display contains
Please refer to user
mercury. Dispose of it
manual or follow local as required by local
ordinances or regulations ordinances and
for disposal of this
regulations."
machine (or product).
Label Construction - Per
requirements of UL 969
Standard, "Marking and
Labeling Systems."
Minimum Capital Letter
Text Height - 3.53mm.
**
Label Wording - This Statement Wording -
product contains a
"The fluorescent lamp
cathode fluorescent lamp in the liquid crystal
which contains mercury. display contains
Please refer to user
mercury. Dispose of it
manual or follow local as required by local
ordinances or regulations ordinances and
for disposal of this
regulations."
machine (or product).
Label Construction - Per
requirements of UL 969
Standard, "Marking and
Labeling Systems."
Minimum Capital Letter
Text Height - 3.53mm.
**
* The labels must also be on the replacement part or product, such as a service part and the packaging for the replacement part. **The State of Vermont requires a 10 point font which equates to a height of 3.53mm. If the text on the Product or Part label is not able to meet this height requirement, then an Alternative Labeling Plan must be submitted to and approved by the State of Vermont. IBM may request documentation from Supplier of an approved Alternative Labeling Plan. The label for the packaging must meet the 10-point font requirement.
For Canada, the following information is required in a readily visible location on the product and package: a. The statement "Contains mercury / Contient du mercure" b. Safe handling procedures and the measures to be taken in case of accidental breakage, the address of a website where that information is available, or contact information for a person who can provide that information; c. The options available for the disposal and recycling of the product in accordance with the laws of the jurisdiction where the disposal or recycling is to take place, the address of a website where that information is available, or contact information for a person who can provide that information; d. A statement that the product should be disposed of or recycled in accordance with the applicable laws; and e. Symbol "Hg" in a font size of at least 10 points with characters that are at least 3 mm in height or within a pictogram of a least 7 mm in height.
The above information for Canada, must be in both English and French Canadian; in a font size of at least 10 points with characters that are at least 3mm in height, that are legible and indelible and that are impressed, embossed or in a color that contrasts with the label's background or the color of the product; be enclosed by a border, and be easily
PN 46G3772 Page 61 of 197 EC J85151 13MAY05
EC 899569 04NOV93 EC G32590 08FEB06
EC 899773 07DEC94 EC L04925B 11JAN07
EC F15040 25AUG97 EC L04925M 01AUG07
EC F73298 02SEP99 EC L04925N 19FEB08
EC F74336 05SEP00 EC L05962X 08AUG08
EC F72950 23JAN02 EC L79598 25FEB09
EC H64064 13MAY03 EC N24534E 02OCT09
EC H17205 29JUL03 EC L79598A 22FEB10
EC L79598B 22SEPT10
EC L79598C 27APR2011
EC L79598D 6SEPT2011
EC N31517Y 26MAR2012
ECN31946T 19APR2013
ECN33076 5DEC2013
ECN33076A 16MAY2014
ECN46883 17OCT2014
ECP02692 26MAY2015
ECO P02838 15OCT2015
ECOP17505 21APR2016
ECO P17633 1OCT2016
ECOP17764 20MAR2017
ECOP17905 16OCT2017
ECOP17958 Jan 25, 2018
ECOP44540 June 11, 2018
ECOP44680 Mar 5, 2019
ECOP44794 Aug 9, 2019
ECO P44877 15Feb2020
ECO P45188 1Sept2020
ECO P45272 9Mar2021
ECO P45379 18Oct2021
ECO 45443 4April2022
ECO P45475 14Nov2022
This document is the property of IBM. Its use is authorized only for responding to a request for quotation or for the performance of work for IBM. All questions must be referred to the IBM Procurement Department requesting the quotation or performance of work.
Engineering Specification
Page 62 of 197
distinguishable from other graphic material on the product or its package. See the Canada regulation for further details if the product or package is too small, or there is no package to accommodate the information. Annual reporting and a permit is required to import mercury containing products into Canada after November 7, 2015.
In some jurisdictions, at the point of sale of a Product containing mercury, notification must be given to the customer that the product contains mercury. Contact your IBM representative for more details or requirements.
In the United States, mercury manufacturing, including importing, must be reported. See 40 CFR part 713 Reporting requirements for the TSCA Inventory of Mercury supply, use, and trade for details.
2.7 Product Chemical Emissions
Chemical emissions analyses shall be performed on Products and supplies (e.g., toner), but are not necessary for Parts or subassemblies of IBM logo hardware Products. Products covered by this specification shall not emit chemicals during normal use conditions which exceed the threshold values or requirements listed in U.S. 29 CFR 1910 (tables Z 1-3)) or the California Safe Drinking Water and Toxic Enforcement Act of 1986 (Proposition 65). Product chemical emissions requirements are delineated in ECMA 328: Detection and Measurement of Chemical Emissions from Electronic Equipment.
2.8 WEEE Marking
2.8.1 Affected Products and Jurisdictions
References EU Directive 2012/19/EU of the European Parliament and of the Council of 4 July 2012 on waste electrical and electronic equipment (WEEE) (recast) and amendments. European Standard EN 50419 Marking of electrical and electronic equipment.
Electrical and electronic equipment (EEE) which is put on the market in the European Union after August 13, 2005 and is listed in Annex II of EU Directive 2012/19/EU on Waste Electrical and Electronic Equipment (WEEE) is subject to the requirements for product markings in accordance with the Directive. In addition to the products specified in this Annex of the WEEE Directive, stand-alone options that operate external to the products listed (e.g., keyboards, monitors, external power supplies, mice, external drives, racks, power distribution units) should also be marked. Components and internal parts of the stand-alone equipment listed in Annex II do not need to be marked. Please note that external power supplies, adapters and electronic tools require a WEEE label. This requirement is also required for several other jurisdictions outside of the EU, e.g., Buenos Aires, Argentina, Bosnia-Herzegovina, India, Jordan, Macedonia, Nigeria, Peru (recommended for Peru, not required), Serbia, and Turkey (this list is not all inclusive).
2.8.2 WEEE Marking Elements, including Date of Manufacture
The marking of EEE, in order to meet requirements in all jurisdictions, must have the following: 1. The crossed-out wheeled bin symbol, including the black bar, in accordance with Annex IX of the WEEE
Directive per Article 14(4). (Please note, the symbol of the crossed-out wheeled bin, without the underlying black bar, is the same as required for the battery collection mark in the EU, see Figure 5.) 2. A unique identification of the producer such as a brand name, trademark, company registration number or other suitable means recorded in EU member state's register of producers per Article 12(1) of the Directive, 3. The date of manufacture/put on the market, and 4. A product identification number (compliance ID number) and serial number (for Nigeria).
The date of manufacture or date put on the market must be in un-coded text in accordance with EN 28601 (this European standard is equivalent to ISO 8601) or other coded text. If coded text is used, the code definition must be made available for treatment facilities and must be provided to IBM. The preferred DOM format is YYYYMMDD.
PN 46G3772 Page 62 of 197 EC J85151 13MAY05
EC 899569 04NOV93 EC G32590 08FEB06
EC 899773 07DEC94 EC L04925B 11JAN07
EC F15040 25AUG97 EC L04925M 01AUG07
EC F73298 02SEP99 EC L04925N 19FEB08
EC F74336 05SEP00 EC L05962X 08AUG08
EC F72950 23JAN02 EC L79598 25FEB09
EC H64064 13MAY03 EC N24534E 02OCT09
EC H17205 29JUL03 EC L79598A 22FEB10
EC L79598B 22SEPT10
EC L79598C 27APR2011
EC L79598D 6SEPT2011
EC N31517Y 26MAR2012
ECN31946T 19APR2013
ECN33076 5DEC2013
ECN33076A 16MAY2014
ECN46883 17OCT2014
ECP02692 26MAY2015
ECO P02838 15OCT2015
ECOP17505 21APR2016
ECO P17633 1OCT2016
ECOP17764 20MAR2017
ECOP17905 16OCT2017
ECOP17958 Jan 25, 2018
ECOP44540 June 11, 2018
ECOP44680 Mar 5, 2019
ECOP44794 Aug 9, 2019
ECO P44877 15Feb2020
ECO P45188 1Sept2020
ECO P45272 9Mar2021
ECO P45379 18Oct2021
ECO 45443 4April2022
ECO P45475 14Nov2022
This document is the property of IBM. Its use is authorized only for responding to a request for quotation or for the performance of work for IBM. All questions must be referred to the IBM Procurement Department requesting the quotation or performance of work.
Engineering Specification
Page 63 of 197
See Section 2.9.2 for additional DOM requirements for China requirements. The specific placement of these markings is not prescribed other than for the relationship of the solid bar to the crossed-out wheeled bin.
Figure 5. The WEEE Mark
The markings must be visible, accessible, durable, legible, and indelible. The height of the solid bar shall be the greater of 0.3a or 1mm. Each marking element must be located on a permanent portion of the EEE such as a frame member or chassis that cannot be removed or exchanged. Markings can be located behind a door or cover but must be viewable without the use of a tool by a customer or operator. When the size or function of the product does not allow a label, the marking shall be printed on the packaging, on the instructions for use, and in the warranty of the product.
European Standard 50419:2005 prescribes that the marking must meet minimum marking durability requirements. The marking must remain legible after rubbing by hand for 15 seconds with a piece of cloth soaked with water and again for 15 seconds with a piece of cloth soaked with aliphatic solvent hexane. If marking plates or labels are used, then after this test they shall not show curling.
2.9 Electrical and Electronic Products and Electronics Information Products Mark and Table
2.9.1 People's Republic of China
Scope
This section specifies the requirements for the People's Republic of China Management Methods for Restricted Use of Hazardous Substances in Electrical and Electronic Products Order # 32 and Management Methods for Controlling Pollution by Electronic Information Products, Ministry of Information Industry Order #39 and Standard SJ/T 113642014 Marking for the Restriction of the Use of Hazardous Substances in Electrical and Electronic Products (EEP).
Deliverables for which this section applies to include but may not be limited to: 1. Systems, e.g., servers, printers, and storage products including racks. 2. Standalone products which are located external to an IBM system, e.g., monitors/displays, laptops, keyboards,
mice, tape autoloaders, bridge boxes, modems, routers, uninterruptible power supplies, and external disk drives. Refer to the People's Republic of China Ministry of Information Industry (MII) List of Electronic Information Products Classification and Explanations for a comprehensive list of EIP and/or EEP. 3. Parts, assemblies, or products which are sold commercially not for use in IBM equipment or IBM designed OEM equipment, e.g., hard disk drives, switches, circuit cards, and storage media. Refer to the MII List of Electronic Information Products Classification and Explanations for a comprehensive list of EIP and/or EEP. 4. Electronic measuring equipment, e.g., Voltage measuring apparatus, oscillographs, frequency measuring instruments, testers, voltage power supplies, and power meters. Refer to the MII List of Electronic Information Products Classification and Explanations for a comprehensive list of EIP and/or EEP. This section does not apply to: 1. Non-electrical tools (e.g., hammers, screwdrivers, ladders),
PN 46G3772 Page 63 of 197 EC J85151 13MAY05
EC 899569 04NOV93 EC G32590 08FEB06
EC 899773 07DEC94 EC L04925B 11JAN07
EC F15040 25AUG97 EC L04925M 01AUG07
EC F73298 02SEP99 EC L04925N 19FEB08
EC F74336 05SEP00 EC L05962X 08AUG08
EC F72950 23JAN02 EC L79598 25FEB09
EC H64064 13MAY03 EC N24534E 02OCT09
EC H17205 29JUL03 EC L79598A 22FEB10
EC L79598B 22SEPT10
EC L79598C 27APR2011
EC L79598D 6SEPT2011
EC N31517Y 26MAR2012
ECN31946T 19APR2013
ECN33076 5DEC2013
ECN33076A 16MAY2014
ECN46883 17OCT2014
ECP02692 26MAY2015
ECO P02838 15OCT2015
ECOP17505 21APR2016
ECO P17633 1OCT2016
ECOP17764 20MAR2017
ECOP17905 16OCT2017
ECOP17958 Jan 25, 2018
ECOP44540 June 11, 2018
ECOP44680 Mar 5, 2019
ECOP44794 Aug 9, 2019
ECO P44877 15Feb2020
ECO P45188 1Sept2020
ECO P45272 9Mar2021
ECO P45379 18Oct2021
ECO 45443 4April2022
ECO P45475 14Nov2022
This document is the property of IBM. Its use is authorized only for responding to a request for quotation or for the performance of work for IBM. All questions must be referred to the IBM Procurement Department requesting the quotation or performance of work.
Engineering Specification
Page 64 of 197
2. Electrical tools for use with IBM equipment, e.g., Power hand tools such as drills, (note - electrical tools which are used in the production of mold and gear as specified in MII's EIP and/or EEP List are included in the MII's regulations for EIP and/or EEP),
3. Customer instruction manuals and publications, both hardcopy and softcopy (Note: this section does apply to manuals and publications on floppy disks),
4. Software and firmware updates, this includes recorded storage media such as CDs and DVDs (Note: this section does apply to software and firmware updates on floppy disks), and
5. Product packaging materials (e.g., cardboard and wood pallets). IBM packaging requirements are located in IBM Engineering Specification 5897661 - Recyclable Packaging Materials, Selection and Identification.
Section 2.9.2 on EEP Pollution Control Logos does not apply to the following, but these parts must be included in the Toxic and Hazardous Substance Table outlined in Section 2.9.2: 1. Production parts and assemblies internal to IBM systems, including line cords, 2. Spare parts, parts for upgrade, maintenance or repair when the parts are used internal to an IBM system, and 3. Coin cell batteries where there is no functional space to place an EEP Pollution Control logo.
Definitions
Contain Per SJ/T 11364-2014 Refers to cases that the content of hazardous substances is in excess of the concentration limits specified in GB/T 26572-2011 Requirements for Concentration Limits for Certain Restricted Substances in Electronic and Electrical Products or the product contains one of these substances to an exemption allowed pursuant to the EU RoHS Directive. See reference table below for applicable Concentration Limits (CL).
Table 13. Hazardous Substances and Concentration Limits for China EEP Regulation
Hazardous Substance
CLs in a Homogeneous Material % by weight or (ppm)
(Maximum level)
Lead (Pb)
0.1% or 1,000 ppm
Mercury (Hg)
0.1% or 1,000 ppm
Cadmium (Cd)
0.01% or 100 ppm
Hexavalent chromium (Cr VI )
0.1% or 1,000 ppm
Polybrominated biphenyl (PBB) flame retardants *
0.1% or 1,000 ppm
Polybrominated diphenyl ether (PBDE) flame retardants*
0.1% or 1,000 ppm
* See Annexes for limited lists of PBBs and PBDEs.
Electronic Information Products (EIP) - Per MII Order No. 39 - Products and their accessories that are manufactured by utilizing electronic information technologies including: 1.Electronic radar products 2.Electronic communications products 3.Radio and television products 4.Computer products 5.Home electronic products 6.Electronic instrument measuring products 7.Specialized electronic products 8.Electronic components and parts 9.Electronic applications 10.Electronic materials 11.Software products and their accessories Electrical and Electronic Product (EEP) - Per SJ/T 11364-2014 - Refers to equipment and supportive products which rely on electric current or electromagnetic field to operate, or are intended to generate, transmit and measure electric current or electromagnetic field, with the rated operating voltage not exceeding 1500V for DC, or 1000V for AC. Environmental Protection Use Period (EPUP) - A period of time measured in years defined in SJ/T 11364-2014 as the period when hazardous substances contained in electrical and electronic products, will not lead or change abruptly, the use of such products will not cause severe environmental pollution or cause severe harm to the life or property of the users. The EPUP starts with the Date of Manufacture of the product.
PN 46G3772 Page 64 of 197 EC J85151 13MAY05
EC 899569 04NOV93 EC G32590 08FEB06
EC 899773 07DEC94 EC L04925B 11JAN07
EC F15040 25AUG97 EC L04925M 01AUG07
EC F73298 02SEP99 EC L04925N 19FEB08
EC F74336 05SEP00 EC L05962X 08AUG08
EC F72950 23JAN02 EC L79598 25FEB09
EC H64064 13MAY03 EC N24534E 02OCT09
EC H17205 29JUL03 EC L79598A 22FEB10
EC L79598B 22SEPT10
EC L79598C 27APR2011
EC L79598D 6SEPT2011
EC N31517Y 26MAR2012
ECN31946T 19APR2013
ECN33076 5DEC2013
ECN33076A 16MAY2014
ECN46883 17OCT2014
ECP02692 26MAY2015
ECO P02838 15OCT2015
ECOP17505 21APR2016
ECO P17633 1OCT2016
ECOP17764 20MAR2017
ECOP17905 16OCT2017
ECOP17958 Jan 25, 2018
ECOP44540 June 11, 2018
ECOP44680 Mar 5, 2019
ECOP44794 Aug 9, 2019
ECO P44877 15Feb2020
ECO P45188 1Sept2020
ECO P45272 9Mar2021
ECO P45379 18Oct2021
ECO 45443 4April2022
ECO P45475 14Nov2022
This document is the property of IBM. Its use is authorized only for responding to a request for quotation or for the performance of work for IBM. All questions must be referred to the IBM Procurement Department requesting the quotation or performance of work.
Engineering Specification
Page 65 of 197
Homogeneous Materials - For purposes of this section, this is defined in Standard GB/T 26572-2011 as materials formed of one or more substances, which are homogeneous throughout its various parts. Hazardous Substances - Per SJ/T 11364-2014 - Lead and its compounds, mercury and its compounds, cadmium and its compounds, hexavalent chromium and its compounds, polybrominated biphenyl (PBB), and polybrominated diphenylether (PBDE) contained in electrical and electronic products. (See Table 1 for restrictions on these substances and applicable RoHS specification.)
Requirements EEP Pollution Control Logos
Electrical and electronic products shall be marked with either a Mark I or a Mark II logo, also referred to as the EEP pollution control logo. The logos must meet the requirements in standard SJ/T 11364 2014 - Marking for the Restriction of Hazardous Substances in electrical and Electronic Products.
The logo shall be clear, distinguishable, visible, resistant to color fading, and difficult to remove. The logo shall not be smaller than 5 mm x 5 mm. The logo may be applied on the product by molding, spray coating, sticking, or printing. The "e" in Mark I is an image, not a character. The font of the EPUP number in the Mark II logo is "Impact".
If it is not possible to mark the EEP because of size, irregular shape or function restrictions, then the Mark logo shall be included in the product hardware instructions or in a flyer or insert, which must accompany the EEP. Cables are an example of an irregular shaped product. If the EEP has a maximum surface area less than 5x103 mm2, then the Mark logo must be included in the product hardware instructions, in a flyer or insert or included with the Toxic and Hazardous Substance Table, see details further in this section. If the operating instructions and the packaging of the product are integrated then the mark may be placed on the packaging.
The pollution control logo is to be marked in a prominent location on the EEP, such as the front, side or back of the product where function keys are located. If restricted by function and appearance, the logo shall be located at another visible location easily visible by consumers. The logo may be placed on the chassis.
Mark I A Mark I logo (see Figure below) must be used if the product does not contain toxic and hazardous substances or elements above the CLs in any material or application including those exempt from the requirements of the EU RoHS Directive. It is suggested by the standard that the logo be colored green and color match to - C: 85, M: 30, Y: 85, K: 20. If the marking does not look sufficiently clear because the color of the EEP is close to the suggested color, the color may be altered to any other prominent color. Molded in marking can be the same color as that of the product. IBM Procurement or Development may direct or authorize use of IBM part number 42R7561 which is the Mark I label.
Figure 6. Mark I
This symbol is included as reference only. For the actual image refer either to the China Labeling Standard or the
MII web site.
Mark II A Mark II logo (see Figure below) must be placed on products which have one or more toxic and hazardous substances exceeding the CLs regardless of whether the toxic or hazardous substance is used in an application which is exempt from the EU RoHS Directive. See IBM Engineering Specifications 97P3864 for a list of EU RoHS Directive exemptions which may apply to IBM products.
PN 46G3772 Page 65 of 197 EC J85151 13MAY05
EC 899569 04NOV93 EC G32590 08FEB06
EC 899773 07DEC94 EC L04925B 11JAN07
EC F15040 25AUG97 EC L04925M 01AUG07
EC F73298 02SEP99 EC L04925N 19FEB08
EC F74336 05SEP00 EC L05962X 08AUG08
EC F72950 23JAN02 EC L79598 25FEB09
EC H64064 13MAY03 EC N24534E 02OCT09
EC H17205 29JUL03 EC L79598A 22FEB10
EC L79598B 22SEPT10
EC L79598C 27APR2011
EC L79598D 6SEPT2011
EC N31517Y 26MAR2012
ECN31946T 19APR2013
ECN33076 5DEC2013
ECN33076A 16MAY2014
ECN46883 17OCT2014
ECP02692 26MAY2015
ECO P02838 15OCT2015
ECOP17505 21APR2016
ECO P17633 1OCT2016
ECOP17764 20MAR2017
ECOP17905 16OCT2017
ECOP17958 Jan 25, 2018
ECOP44540 June 11, 2018
ECOP44680 Mar 5, 2019
ECOP44794 Aug 9, 2019
ECO P44877 15Feb2020
ECO P45188 1Sept2020
ECO P45272 9Mar2021
ECO P45379 18Oct2021
ECO 45443 4April2022
ECO P45475 14Nov2022
This document is the property of IBM. Its use is authorized only for responding to a request for quotation or for the performance of work for IBM. All questions must be referred to the IBM Procurement Department requesting the quotation or performance of work.
Engineering Specification
Page 66 of 197
Figure 7. Example of Mark II.
This symbol is included as reference only. For the actual image refer to the China Labeling Standard or the MII web site.
It is suggested by the Chinese standard that the Mark II label be orange. The SJ/T 11364-2014 standard references the color match as C: 0, M: 75, Y: 100, K: 0. If the logo does not look sufficiently clear because the color of the EEP is close to the suggested color, the color may be altered to any other prominent color. Molded in marking can be the same color as that of the product.
IBM Procurement or Development may direct or authorize use of IBM part numbers which are the Mark II labels. While the Supplier is responsible for determining the EPUP for its parts and products, IBM intends to use the following EPUPs for IBM logo parts and products manufactured by IBM. The corresponding IBM label part number is listed.
Table 14. Sample IBM EPUPs and Corresponding Label Part Numbers
EEP
EPUP
IBM Label Part Number
Professional computers, including servers, racks, high performance workstations
30
42R7646
(Unix based), high end storage systems and high-end printers
Workstations (Intel based) and mid to low end General Office Printers
15
42R7645
Displays, Input/ Output devices, (e.g., keyboards, mice), low end external drives
10
42R7644
(e.g., floppy disk drives, CD drives, low end storage drives), compact discs,
storage media*, cables, and LCDs with fluorescent lamps.
Batteries** (except lead acid)
5
42R7643
Electronic measurement instrument products
40 None available at this time.
Please note while the Supplier is responsible for determining the appropriate EPUP for its parts and products, (a) if the Supplier of an IBM logo
product intends to use a different EPUP number for an IBM logo product, then the Supplier must inform IBM in writing of its intent, and such
EPUP number must be approved by the IBM product environmental focal point in IBM Systems for the product brand, and (b) if the Supplier of a
non-IBM logo product intends to use a different EPUP number for a non-IBM logo product to be distributed by IBM, then the Supplier must
inform IBM in writing of its intent.
*Storage media, such as CDs, DVDs, and tape cartridges when sold commercially or at retail for use in non-IBM logo systems, must have a Mark
logo. If a Mark II logo is used, then a Toxic and Hazardous Substances or Elements Table must accompany the parts or products. This applies to
blank storage media. Note: CDs, DVDS and tape cartridges with IBM software and firmware for IBM Products do not require a Mark logo,
whereas floppy disks with IBM software and firmware do require a Mark logo and HST table.
** IBM does not require a Mark symbol for coin and button cell batteries, if located inside another product. Battery packs, such as nickel metal
hydride battery packs and lithium ion batteries must be labeled with a Mark logo. Batteries and battery packs must be listed in the Toxic and
Hazardous Substance Table, (see Section 2.9.2) if the product is labeled with a Mark II logo. Note: lead acid batteries do not require a Mark label.
As required by the China Regulations on Product Marking and Labeling, products labeled with Mark II must also be labeled with a Date of Manufacturing (DOM). The DOM may be on the product or the packaging. The DOM may be in any of the following formats: YY, WW-YY, MM-YY, DD-MM-YY or by way of other widely accepted product marking method containing manufacture date such as product serial number and bar code. See Section 2.8 for other DOM requirements. Labeling methods such as serial numbers and bar codes that contain the date of the products may also be used, but the manufacturer or importer must provide necessary manufacturing date identification services for consumers and regulatory authorities.
Toxic and Hazardous Substances or Elements Table (HST)
When a Mark II symbol is used on a Product a Toxic and Hazardous Substance Table must accompany the shipment of the Product. The table below outlines the format IBM requires for the HST table and provides examples of completed lines. All text must be translated into Simplified Chinese. English may remain on the table next to the Simplified Chinese text. When electronic versions (e.g., removable laser disk) of product instructions or descriptions are shipped with the product rather than hardcopy paper versions, then the HST Table may be included on the electronic version of the product information rather than in hardcopy version. The latest version of IBM Environmental Notices and User Guide, Z125-5823, has the required China HST table in it and may be used to fulfill this notification requirement.
PN 46G3772 Page 66 of 197 EC J85151 13MAY05
EC 899569 04NOV93 EC G32590 08FEB06
EC 899773 07DEC94 EC L04925B 11JAN07
EC F15040 25AUG97 EC L04925M 01AUG07
EC F73298 02SEP99 EC L04925N 19FEB08
EC F74336 05SEP00 EC L05962X 08AUG08
EC F72950 23JAN02 EC L79598 25FEB09
EC H64064 13MAY03 EC N24534E 02OCT09
EC H17205 29JUL03 EC L79598A 22FEB10
EC L79598B 22SEPT10
EC L79598C 27APR2011
EC L79598D 6SEPT2011
EC N31517Y 26MAR2012
ECN31946T 19APR2013
ECN33076 5DEC2013
ECN33076A 16MAY2014
ECN46883 17OCT2014
ECP02692 26MAY2015
ECO P02838 15OCT2015
ECOP17505 21APR2016
ECO P17633 1OCT2016
ECOP17764 20MAR2017
ECOP17905 16OCT2017
ECOP17958 Jan 25, 2018
ECOP44540 June 11, 2018
ECOP44680 Mar 5, 2019
ECOP44794 Aug 9, 2019
ECO P44877 15Feb2020
ECO P45188 1Sept2020
ECO P45272 9Mar2021
ECO P45379 18Oct2021
ECO 45443 4April2022
ECO P45475 14Nov2022
This document is the property of IBM. Its use is authorized only for responding to a request for quotation or for the performance of work for IBM. All questions must be referred to the IBM Procurement Department requesting the quotation or performance of work.
Engineering Specification
Page 67 of 197
Table 15. Format and Example of a Toxic and Hazardous Substances or Elements Table
Names and Contents of Hazardous Substances in the Product
Part Name
Hazardous Substance
Server
Lead (Pb)
X
Mercury (Hg)
O
Cadmium (Cd)
O
Hexavalent Chromium (Cr(VI))
O
Polybrominated biphenyl (PBB)
O
Polybrominated diphenylether (PBDE)
O
Chassis
O
O
O
O
O
O
Power Supply
X
O
O
O
O
O
Battery Pack
X
O
O
O
O
O
This table is prepared according to SJ/T 11364. : Indicates that this hazardous substance contained in all of the homogeneous materials for this part is below the limit requirement in GB/T 26572. : Indicates that this hazardous substance contained in at least one of the homogeneous materials used for this part is above the limit requirement in GB/T 26572. Note in the table above, the "X" is a cross (the two lines are perpendicular) and the "O" is a circle. The height of the Chinese characters must not be less than 1.8mm.
The first column must be completed with the part names found in the product or part. The columns under the Toxic and Hazardous Substances or Elements must be filled in with either a cross or a circle to indicate the presence or absence of the Toxic and Hazardous Substances or Elements in the part. Presence of a substance is determined if the concentration of the substance is above the CL including when used in an application which is exempt from the EU RoHS Directive. Absence is determined if the concentration of the substance is below the CL and is not used in an application which is allowed under an EU RoHS Directive exemption. See IBM Specification 53P6233 or 97P 3864 for a list of EU RoHS Directive exemptions which may apply to IBM Products and Parts for a listing of allowable exemptions. For IBM logo Products or Parts, see table below for a list of Part names which can be used for the column in the table listing Part names.
Table 16. Part Names for use in a Toxic and Hazardous Substances or Elements Table for IBM Logo Products and Parts.
Accessor control
Acousto-optic modulator Air moving devices
Drum Duplex unit
ECAT assemblies
Batteries
Battery pack assembly Cable assemblies
Cages or enclosures Cash-handling device Casters
Emergency power off switch External covers Fiber Optic Transceiver Filter Fluorescent lamp
Frame assemblies
Chassis
Circuit card with mechanicals Circuit card without mechanicals Conveyor
Fuser unit Grid
Ground strap
IO station
LCD Monitor LCD Touch screen
Oiler roll
Sensor
Operator interface unit Server
LED display panel LED Monitor
Optical cable
Signature capture
device
Other mechanical parts Speaker
Light Light bulb
Paper drawer Payment device
Stacker unit Static brush
Line cord Logic modules Mechanical assemblies
Memory modules MICR head
Pinion shaft Point of sale device Power Distribution Unit Power supply Printer
Storage device Tape drive Toner cartridge
UPS Urge unit
Mirror motor assembly Printer cartridge
Vacuum plenum
Modem
Printhead
Water cooling assembly
PN 46G3772 Page 67 of 197 EC J85151 13MAY05
EC 899569 04NOV93 EC G32590 08FEB06
EC 899773 07DEC94 EC L04925B 11JAN07
EC F15040 25AUG97 EC L04925M 01AUG07
EC F73298 02SEP99 EC L04925N 19FEB08
EC F74336 05SEP00 EC L05962X 08AUG08
EC F72950 23JAN02 EC L79598 25FEB09
EC H64064 13MAY03 EC N24534E 02OCT09
EC H17205 29JUL03 EC L79598A 22FEB10
EC L79598B 22SEPT10
EC L79598C 27APR2011
EC L79598D 6SEPT2011
EC N31517Y 26MAR2012
ECN31946T 19APR2013
ECN33076 5DEC2013
ECN33076A 16MAY2014
ECN46883 17OCT2014
ECP02692 26MAY2015
ECO P02838 15OCT2015
ECOP17505 21APR2016
ECO P17633 1OCT2016
ECOP17764 20MAR2017
ECOP17905 16OCT2017
ECOP17958 Jan 25, 2018
ECOP44540 June 11, 2018
ECOP44680 Mar 5, 2019
ECOP44794 Aug 9, 2019
ECO P44877 15Feb2020
ECO P45188 1Sept2020
ECO P45272 9Mar2021
ECO P45379 18Oct2021
ECO 45443 4April2022
ECO P45475 14Nov2022
This document is the property of IBM. Its use is authorized only for responding to a request for quotation or for the performance of work for IBM. All questions must be referred to the IBM Procurement Department requesting the quotation or performance of work.
Engineering Specification
Page 68 of 197
Table 16. Part Names for use in a Toxic and Hazardous Substances or Elements Table for IBM Logo Products and Parts.
Cooling assembly Corona housing
Corona wire Developer unit
JAG I/O station Keyboard
Lamp Laser
Monitor Mouse
Multi-function printer Oil damper
Processor modules Refrigeration assembly
Roll Scale
Wrap plug X axis assembly
X Rail assembly Y axis assembly
Disk drive
Laser spot size tool
Oiler belt
Scanner
IBM requires that the following additional text, in Simplified Chinese, be added to the bottom of the table for IBM logo Products or Parts: "Environmental Protection Use Period (EPUP) Disclaimer: The number provided as the EPUP is provided solely to comply with applicable laws of the People's Republic of China. It does not create any warranties or liabilities on behalf of IBM to customers. The EPUP assumes that the product will be used under normal conditions in accordance with the IBM operating manual. Certain assemblies inside this product (for example, assemblies that contain a battery) may have an EPUP which is lower than the EPUP on this product."
Example of China HST for IBM Logo Products The HST below is provided in English for reference, the table must be translated into Simplified Chinese.
PN 46G3772 Page 68 of 197 EC J85151 13MAY05
EC 899569 04NOV93 EC G32590 08FEB06
EC 899773 07DEC94 EC L04925B 11JAN07
EC F15040 25AUG97 EC L04925M 01AUG07
EC F73298 02SEP99 EC L04925N 19FEB08
EC F74336 05SEP00 EC L05962X 08AUG08
EC F72950 23JAN02 EC L79598 25FEB09
EC H64064 13MAY03 EC N24534E 02OCT09
EC H17205 29JUL03 EC L79598A 22FEB10
EC L79598B 22SEPT10
EC L79598C 27APR2011
EC L79598D 6SEPT2011
EC N31517Y 26MAR2012
ECN31946T 19APR2013
ECN33076 5DEC2013
ECN33076A 16MAY2014
ECN46883 17OCT2014
ECP02692 26MAY2015
ECO P02838 15OCT2015
ECOP17505 21APR2016
ECO P17633 1OCT2016
ECOP17764 20MAR2017
ECOP17905 16OCT2017
ECOP17958 Jan 25, 2018
ECOP44540 June 11, 2018
ECOP44680 Mar 5, 2019
ECOP44794 Aug 9, 2019
ECO P44877 15Feb2020
ECO P45188 1Sept2020
ECO P45272 9Mar2021
ECO P45379 18Oct2021
ECO 45443 4April2022
ECO P45475 14Nov2022
This document is the property of IBM. Its use is authorized only for responding to a request for quotation or for the performance of work for IBM. All questions must be referred to the IBM Procurement Department requesting the quotation or performance of work.
Engineering Specification
Page 69 of 197
2.9.2 Taiwan
References
National Standard of Republic of China CNS 15663 Guidance to reduction of the restricted chemical substances in electrical and electronic equipment. Inspection requirements including marking of the presence conditions of the restricted substances on the legal inspection for 92 items of electrical and electronic products Inspection requirements including marking of the presence conditions of the restricted substance on the legal inspection for 6 kinds of IT/ AV products, Bureau of Standards, Metrology and Inspection (BSMI), Ministry of Economic Affairs (MOEA) Amendment to the legal inspection regulation for 8 items of electrical products Amendment to legal inspection requirements for 7 items of electrical and electronic products
Scope
This requirement is applicable for electrical and electronic equipment (EEE) with a voltage rating less than 1000 volts for alternating current and 1500 volts for direct current, and dependent on electric currents or electromagnetic fields in order to work properly and equipment for the generation, transfer and measurement of such currents and fields. For examples of the equipment this is applicable for, refer to Annexes B and C of CNS 15663.
BMI inspection requirements, including marking of the presence of restricted chemical substances, apply to the following products with the related Customs Commodity Code Number (CCCN) codes. The list included here is a subset of the products in scope of this requirement. This subset is for products applicable for IBM Systems and Appliances and includes mainframes, minicomputers, printers, personal computers, mice, keyboards, laptop computers, notebook computers, notepad computers, and other products and equipment for the collection, storage, processing, presentation or communication of information by electronic means.
PN 46G3772 Page 69 of 197 EC J85151 13MAY05
EC 899569 04NOV93 EC G32590 08FEB06
EC 899773 07DEC94 EC L04925B 11JAN07
EC F15040 25AUG97 EC L04925M 01AUG07
EC F73298 02SEP99 EC L04925N 19FEB08
EC F74336 05SEP00 EC L05962X 08AUG08
EC F72950 23JAN02 EC L79598 25FEB09
EC H64064 13MAY03 EC N24534E 02OCT09
EC H17205 29JUL03 EC L79598A 22FEB10
EC L79598B 22SEPT10
EC L79598C 27APR2011
EC L79598D 6SEPT2011
EC N31517Y 26MAR2012
ECN31946T 19APR2013
ECN33076 5DEC2013
ECN33076A 16MAY2014
ECN46883 17OCT2014
ECP02692 26MAY2015
ECO P02838 15OCT2015
ECOP17505 21APR2016
ECO P17633 1OCT2016
ECOP17764 20MAR2017
ECOP17905 16OCT2017
ECOP17958 Jan 25, 2018
ECOP44540 June 11, 2018
ECOP44680 Mar 5, 2019
ECOP44794 Aug 9, 2019
ECO P44877 15Feb2020
ECO P45188 1Sept2020
ECO P45272 9Mar2021
ECO P45379 18Oct2021
ECO 45443 4April2022
ECO P45475 14Nov2022
This document is the property of IBM. Its use is authorized only for responding to a request for quotation or for the performance of work for IBM. All questions must be referred to the IBM Procurement Department requesting the quotation or performance of work.
Engineering Specification
Page 70 of 197
PN 46G3772 Page 70 of 197 EC J85151 13MAY05
EC 899569 04NOV93 EC G32590 08FEB06
EC 899773 07DEC94 EC L04925B 11JAN07
EC F15040 25AUG97 EC L04925M 01AUG07
EC F73298 02SEP99 EC L04925N 19FEB08
EC F74336 05SEP00 EC L05962X 08AUG08
EC F72950 23JAN02 EC L79598 25FEB09
EC H64064 13MAY03 EC N24534E 02OCT09
EC H17205 29JUL03 EC L79598A 22FEB10
EC L79598B 22SEPT10
EC L79598C 27APR2011
EC L79598D 6SEPT2011
EC N31517Y 26MAR2012
ECN31946T 19APR2013
ECN33076 5DEC2013
ECN33076A 16MAY2014
ECN46883 17OCT2014
ECP02692 26MAY2015
ECO P02838 15OCT2015
ECOP17505 21APR2016
ECO P17633 1OCT2016
ECOP17764 20MAR2017
ECOP17905 16OCT2017
ECOP17958 Jan 25, 2018
ECOP44540 June 11, 2018
ECOP44680 Mar 5, 2019
ECOP44794 Aug 9, 2019
ECO P44877 15Feb2020
ECO P45188 1Sept2020
ECO P45272 9Mar2021
ECO P45379 18Oct2021
ECO 45443 4April2022
ECO P45475 14Nov2022
This document is the property of IBM. Its use is authorized only for responding to a request for quotation or for the performance of work for IBM. All questions must be referred to the IBM Procurement Department requesting the quotation or performance of work.
Engineering Specification
Page 71 of 197
PN 46G3772 Page 71 of 197 EC J85151 13MAY05
EC 899569 04NOV93 EC G32590 08FEB06
EC 899773 07DEC94 EC L04925B 11JAN07
EC F15040 25AUG97 EC L04925M 01AUG07
EC F73298 02SEP99 EC L04925N 19FEB08
EC F74336 05SEP00 EC L05962X 08AUG08
EC F72950 23JAN02 EC L79598 25FEB09
EC H64064 13MAY03 EC N24534E 02OCT09
EC H17205 29JUL03 EC L79598A 22FEB10
EC L79598B 22SEPT10
EC L79598C 27APR2011
EC L79598D 6SEPT2011
EC N31517Y 26MAR2012
ECN31946T 19APR2013
ECN33076 5DEC2013
ECN33076A 16MAY2014
ECN46883 17OCT2014
ECP02692 26MAY2015
ECO P02838 15OCT2015
ECOP17505 21APR2016
ECO P17633 1OCT2016
ECOP17764 20MAR2017
ECOP17905 16OCT2017
ECOP17958 Jan 25, 2018
ECOP44540 June 11, 2018
ECOP44680 Mar 5, 2019
ECOP44794 Aug 9, 2019
ECO P44877 15Feb2020
ECO P45188 1Sept2020
ECO P45272 9Mar2021
ECO P45379 18Oct2021
ECO 45443 4April2022
ECO P45475 14Nov2022
This document is the property of IBM. Its use is authorized only for responding to a request for quotation or for the performance of work for IBM. All questions must be referred to the IBM Procurement Department requesting the quotation or performance of work.
Engineering Specification
Page 72 of 197
Requirements
Please refer to CNS 15663 for details related to definitions, substances, exemptions and calculations for creation of a product marking table as shown in this section.
PN 46G3772 Page 72 of 197 EC J85151 13MAY05
EC 899569 04NOV93 EC G32590 08FEB06
EC 899773 07DEC94 EC L04925B 11JAN07
EC F15040 25AUG97 EC L04925M 01AUG07
EC F73298 02SEP99 EC L04925N 19FEB08
EC F74336 05SEP00 EC L05962X 08AUG08
EC F72950 23JAN02 EC L79598 25FEB09
EC H64064 13MAY03 EC N24534E 02OCT09
EC H17205 29JUL03 EC L79598A 22FEB10
EC L79598B 22SEPT10
EC L79598C 27APR2011
EC L79598D 6SEPT2011
EC N31517Y 26MAR2012
ECN31946T 19APR2013
ECN33076 5DEC2013
ECN33076A 16MAY2014
ECN46883 17OCT2014
ECP02692 26MAY2015
ECO P02838 15OCT2015
ECOP17505 21APR2016
ECO P17633 1OCT2016
ECOP17764 20MAR2017
ECOP17905 16OCT2017
ECOP17958 Jan 25, 2018
ECOP44540 June 11, 2018
ECOP44680 Mar 5, 2019
ECOP44794 Aug 9, 2019
ECO P44877 15Feb2020
ECO P45188 1Sept2020
ECO P45272 9Mar2021
ECO P45379 18Oct2021
ECO 45443 4April2022
ECO P45475 14Nov2022
This document is the property of IBM. Its use is authorized only for responding to a request for quotation or for the performance of work for IBM. All questions must be referred to the IBM Procurement Department requesting the quotation or performance of work.
Engineering Specification
Page 73 of 197
Marking Tables
EEE shall be marked with a table showing the presence or absence of restricted chemical substances by product unit: lead, mercury, cadmium, hexavalent chromium, polybrominated biphenyls and polybrominated diphenyl ethers. See example table in this section. The table must be translated into Traditional Chinese for Taiwan.
When the presence of lead, mercury, cadmium, hexavalent chromium, polybrominated biphenyls and polybrominated diphenyl ethers exceed the maximum concentration value (MCV) in Table 1 of CNS 15663 (Lead, mercury, and hexavalent chromium are each 0.1%, cadmium is 0.01%, PBB and PBDE are each 0.1%) and the application is entitled to an exemption, enter "-"on the marking table. In the case where the presence does not exceed the MCV, enter "O", or the words "Not exceeding the reference percentage presence". When the presence of the substance exceeds the MCV and no exemption applies, the numerical value of the percentage presence shall be indicated, e.g., "Exceeding 0.1 wt.%" or "Exceeding 0.01 wt.%" as applicable.
Examples of Taiwan marking tables
Product marking
The Finished Product BSMI marking shall show compliance to CNS 15663 by including "RoHS" or "RoHS (xx, xx)" under or beside the existing safety / EMC compliance mark. XX refers to any of the six hazardous substances listed on the marking table that is above the maximum concentration limit and has no viable RoHS exemption. For
PN 46G3772 Page 73 of 197 EC J85151 13MAY05
EC 899569 04NOV93 EC G32590 08FEB06
EC 899773 07DEC94 EC L04925B 11JAN07
EC F15040 25AUG97 EC L04925M 01AUG07
EC F73298 02SEP99 EC L04925N 19FEB08
EC F74336 05SEP00 EC L05962X 08AUG08
EC F72950 23JAN02 EC L79598 25FEB09
EC H64064 13MAY03 EC N24534E 02OCT09
EC H17205 29JUL03 EC L79598A 22FEB10
EC L79598B 22SEPT10
EC L79598C 27APR2011
EC L79598D 6SEPT2011
EC N31517Y 26MAR2012
ECN31946T 19APR2013
ECN33076 5DEC2013
ECN33076A 16MAY2014
ECN46883 17OCT2014
ECP02692 26MAY2015
ECO P02838 15OCT2015
ECOP17505 21APR2016
ECO P17633 1OCT2016
ECOP17764 20MAR2017
ECOP17905 16OCT2017
ECOP17958 Jan 25, 2018
ECOP44540 June 11, 2018
ECOP44680 Mar 5, 2019
ECOP44794 Aug 9, 2019
ECO P44877 15Feb2020
ECO P45188 1Sept2020
ECO P45272 9Mar2021
ECO P45379 18Oct2021
ECO 45443 4April2022
ECO P45475 14Nov2022
This document is the property of IBM. Its use is authorized only for responding to a request for quotation or for the performance of work for IBM. All questions must be referred to the IBM Procurement Department requesting the quotation or performance of work.
Engineering Specification
Page 74 of 197
example, if lead is present in the product above 0.1 wt. % and there is no exemption applicable for this use, then the BSMI mark must include "RoHS (Pb)". Examples of the label are included below. The "xx" would be replaced with the corresponding substance if present.
2.10 Environmental Notifications for Customer Hardware Publications
The latest release of IBM publication Z125-5823, Environmental Notices and User Guide, must ship with products, as well as some repair or spare parts (e.g., whole unit replacement parts, parts with batteries, LCDs, and chemical cooling systems) including beta systems, prototypes, etc. Whole unit replacement parts include products which stand-alone outside the server or storage product, such as monitors, keyboards, mice, laptops, external power supplies, racks, power distribution units, smart card readers, switches (e.g., with an incorporated power supply), routers (e.g., with an incorporated power supply), battery chargers, fill and drain tools, and external drives. The requirement for repair or spare parts also applies for vendor-logo repair or spare parts and whole unit replacement parts. For parts and / or products coming from a supplier, IBM will direct supplier to include these notices where needed, e.g., via an Engineering Change or print notice.
2.11 Removed
2.12 Product Energy Requirements
The following sections summarize requirements for selected jurisdictions. The relevant Deliverables must meet all of these requirements irrespective of the jurisdiction where the Deliverable is transferred to IBM.
2.12.1 Monitors, Electronic Displays, Control Panels, Status Displays, etc.
Requirements for China References National Standards of the People's Republic of China GB 21520-2015 Rules for Implementation of China Energy Labels for Computer Monitors CEL 014-2016
Computer monitors shall meet the energy efficiency requirements of the National Standard of the People's Republic of China GB 215202015, Section 4. The scope of this standard includes liquid crystal display monitors used for computers and display equipment with modulator/receivers mainly used for computers. This standard does not apply to professional monitors in engineering, medical treatment and industrial equipment. Rack mounted displays are out of scope of this regulation. This regulation only applies to AC voltage displays.
Requirements Monitors shall be tested, and the testing reported and registered in accordance with the GB 21520 2015 and the China Rules for Implementation of China Energy Labels for Computer Monitors CEL 014-2016.
Monitors shall be labeled with the China Energy Label in accordance with the China Rules for Implementation of China Energy Labels for Computer Monitors CEL 014-2016. The label shall include: (1) Name of Manufacturer (or Abbreviation); (2) Product Model
PN 46G3772 Page 74 of 197 EC J85151 13MAY05
EC 899569 04NOV93 EC G32590 08FEB06
EC 899773 07DEC94 EC L04925B 11JAN07
EC F15040 25AUG97 EC L04925M 01AUG07
EC F73298 02SEP99 EC L04925N 19FEB08
EC F74336 05SEP00 EC L05962X 08AUG08
EC F72950 23JAN02 EC L79598 25FEB09
EC H64064 13MAY03 EC N24534E 02OCT09
EC H17205 29JUL03 EC L79598A 22FEB10
EC L79598B 22SEPT10
EC L79598C 27APR2011
EC L79598D 6SEPT2011
EC N31517Y 26MAR2012
ECN31946T 19APR2013
ECN33076 5DEC2013
ECN33076A 16MAY2014
ECN46883 17OCT2014
ECP02692 26MAY2015
ECO P02838 15OCT2015
ECOP17505 21APR2016
ECO P17633 1OCT2016
ECOP17764 20MAR2017
ECOP17905 16OCT2017
ECOP17958 Jan 25, 2018
ECOP44540 June 11, 2018
ECOP44680 Mar 5, 2019
ECOP44794 Aug 9, 2019
ECO P44877 15Feb2020
ECO P45188 1Sept2020
ECO P45272 9Mar2021
ECO P45379 18Oct2021
ECO 45443 4April2022
ECO P45475 14Nov2022
This document is the property of IBM. Its use is authorized only for responding to a request for quotation or for the performance of work for IBM. All questions must be referred to the IBM Procurement Department requesting the quotation or performance of work.
Engineering Specification
Page 75 of 197
(3) Energy Efficiency Grade (4) Energy Efficiency (cd/w); (5) Off mode power consumption (6) Sleep mode power consumption (7) Category of Product (Standard display or Enhanced performance display) (8) Reference number of National Standard on Energy Efficiency (9) Energy efficiency information code (10) "Top runner" mark (only applicable for product in national energy efficiency "Top runner" program).
The label must be on 80g or above copper plate paper. It must be 66mm long and 45mm wide or enlarged proportionally in accordance with the Rule. It shall be in color with blue and white background. The label can be on the product, or an obvious place on its minimum packaging, or displayed on the screen during start-up for at least two seconds. If the label is used in exterior packaging, product manual, webpage or brochure, it can be printed in monochrome, but the text should be clearly legible.
Figure 8. Example of a China Energy Efficiency Label for Computer Monitors
Requirements for Korea Reference Korea Regulation on Standby Power Reduction Program MKE Notification No 2012-57
Definitions Monitor - Commercially available, electronic product with a display screen and its associated electronics encased in a single housing that is capable of displaying output information from a computer via one or more inputs, such as VGA and DVI with nameplate output power of power supply less than or equal to 1,000W. Includes computer monitors (i.e., focusing on computer monitor as the primary function) or as dual function computer monitors and televisions. Excludes monitor main body integrated computers, network computers, monitors with VoIP and other special embedded functions, monitors for broadcasting and medical purposes. Monitors used for a rack mounted monitoring system installed in a rack system used in conjunction with other highly specialized equipment, rated Class A for EMC purposes, are not in scope of this definition.
Requirements Monitors must be labeled according to Annex V of the Korean e-Standby Program Application Regulation, August 28, 2008 with a warning logo if the monitors do not meet the requirements in the following table:
Classification
Products without Automatic Brightness Control
Monitor low power mode performance
Product Type
On Mode Power
consumption
Diagonal Screen Size <76cm 1.1MP screen resolution Diagonal Screen Size <76cm Screen resolution> 1.1MP
Diagonal Screen Size 76 ~ 153
Po=6×(MP)+0.00775×(A)+3 Po=9×(MP)+0.00775×(A)+3 Po=0.04185×(A)+8
Sleep Mode Power
Consumption
2.0W
Off Mode Power Consumption
0.5W
PN 46G3772 Page 75 of 197 EC J85151 13MAY05
EC 899569 04NOV93 EC G32590 08FEB06
EC 899773 07DEC94 EC L04925B 11JAN07
EC F15040 25AUG97 EC L04925M 01AUG07
EC F73298 02SEP99 EC L04925N 19FEB08
EC F74336 05SEP00 EC L05962X 08AUG08
EC F72950 23JAN02 EC L79598 25FEB09
EC H64064 13MAY03 EC N24534E 02OCT09
EC H17205 29JUL03 EC L79598A 22FEB10
EC L79598B 22SEPT10
EC L79598C 27APR2011
EC L79598D 6SEPT2011
EC N31517Y 26MAR2012
ECN31946T 19APR2013
ECN33076 5DEC2013
ECN33076A 16MAY2014
ECN46883 17OCT2014
ECP02692 26MAY2015
ECO P02838 15OCT2015
ECOP17505 21APR2016
ECO P17633 1OCT2016
ECOP17764 20MAR2017
ECOP17905 16OCT2017
ECOP17958 Jan 25, 2018
ECOP44540 June 11, 2018
ECOP44680 Mar 5, 2019
ECOP44794 Aug 9, 2019
ECO P44877 15Feb2020
ECO P45188 1Sept2020
ECO P45272 9Mar2021
ECO P45379 18Oct2021
ECO 45443 4April2022
ECO P45475 14Nov2022
This document is the property of IBM. Its use is authorized only for responding to a request for quotation or for the performance of work for IBM. All questions must be referred to the IBM Procurement Department requesting the quotation or performance of work.
Engineering Specification
Page 76 of 197
cm; All screen resolutions
Products with
Each screen size and screen
Po1=(0.8×Ph)+(0.2×Pl)
Automatic
resolution
Brightness Control
(Note) Po = on mode power consumption MP = the screen resolution (megapixels)
A = viewable screen area (cm ²)
Po1 = on mode average value of power consumption Ph = on mode power consumption of high ambient lighting conditions. Pl = on mode power consumption of the low ambient lighting conditions
The figure below has an example warning logo. The minimum diameter of the logo is 2.5cm. The logo is to be labeled on the front or top side of the product or on the nameplate of the product where it is visually easy to find. The logo may be monochrome, the predominant color of the product's surface, or in the colors suggested by the Korean e-Standby Regulation. English is provided in the Figure below only as a reference.
Figure 9. Example of a warning logo
The manufacturer of the monitor shall provide IBM with a test report issued by one of the designated testing institutes in Annex IV of the regulation (e.g., Korea Testing Laboratory, Korea Electric Testing Institute, Korea Electrotechnology Research Institute, EMC Research Institute, Telecommunications Technology Association, and/or Korea Electronics Technology Institute) in order for IBM to submit Form A (found in the regulation) along with the issued test report to the Korea Energy Management Corporation (KEMCO).
Requirements for the EU and other jurisdictions which transpose EU directives References EU Commission Regulation No 801/2013 of 22 August 2013 amending Regulation (EC) No 1275/2008 with regard to ecodesign requirements for standby, off mode electric power consumption of electrical and electronic household and office equipment. EU Directive 2009/125/EC of the European Parliament and of the Council of 21 October 2009 establishing a
framework for the setting of ecodesign requirements for energy-related products.
Israel: Energy Sources Law, 1989 - Amendment - (on import of energy efficient electrical appliances compliant with EU Declaration of Conformity), Law, November 2021 EN 45552:2020 General method for the assessment of the durability of energy-related products EN 45553:2020 General method for the assessment of the ability to remanufacture energy- related products EN 45554:2020 General methods for the assessment of the ability to repair, reuse and upgrade energy-related products EN 45555:2019 General methods for assessing the recyclability and recoverability of energy- related products EN 45556:2019 General method for assessing the proportion of reused components in energy- related products EN 45557:2020 General method for assessing the proportion of recycled material content in energy-related products EN 45558:2019 General method to declare the use of critical raw materials in energy-related products EN 45559:2019 Methods for providing information relating to material efficiency aspects of energy-related products EU Regulation 2021/341 of 23 February 2021 amending Regulations (EU) 2019/424, (EU) 2019/1781, (EU) 2019/2019, (EU) 2019/2020, (EU) 2019/2021, (EU) 2019/2022, (EU) 2019/2023 and (EU) 2019/2024 with regard to ecodesign requirements for servers and data storage products, electric motors and variable speed drives, refrigerating
PN 46G3772 Page 76 of 197 EC J85151 13MAY05
EC 899569 04NOV93 EC G32590 08FEB06
EC 899773 07DEC94 EC L04925B 11JAN07
EC F15040 25AUG97 EC L04925M 01AUG07
EC F73298 02SEP99 EC L04925N 19FEB08
EC F74336 05SEP00 EC L05962X 08AUG08
EC F72950 23JAN02 EC L79598 25FEB09
EC H64064 13MAY03 EC N24534E 02OCT09
EC H17205 29JUL03 EC L79598A 22FEB10
EC L79598B 22SEPT10
EC L79598C 27APR2011
EC L79598D 6SEPT2011
EC N31517Y 26MAR2012
ECN31946T 19APR2013
ECN33076 5DEC2013
ECN33076A 16MAY2014
ECN46883 17OCT2014
ECP02692 26MAY2015
ECO P02838 15OCT2015
ECOP17505 21APR2016
ECO P17633 1OCT2016
ECOP17764 20MAR2017
ECOP17905 16OCT2017
ECOP17958 Jan 25, 2018
ECOP44540 June 11, 2018
ECOP44680 Mar 5, 2019
ECOP44794 Aug 9, 2019
ECO P44877 15Feb2020
ECO P45188 1Sept2020
ECO P45272 9Mar2021
ECO P45379 18Oct2021
ECO 45443 4April2022
ECO P45475 14Nov2022
This document is the property of IBM. Its use is authorized only for responding to a request for quotation or for the performance of work for IBM. All questions must be referred to the IBM Procurement Department requesting the quotation or performance of work.
Engineering Specification
Page 77 of 197
appliances, light sources and separate control gears, electronic displays, household dishwashers, household washing machines and household washer-dryers and refrigerating appliances with a direct sales function.
EU Regulation 2019/2021 laying down ecodesign requirements for electronic displays pursuant to Directive 2009/125/EC of the European Parliament and of the Council, amending Commission Regulation (EC) No 1275/2008 and repealing Commission Regulation (EC) No 642/2009. EU Regulation 2019/2013 of 11 March 2019 supplementing Regulation (EU) 2017/1369 of the European Parliament and of the Council with regard to energy labelling of electronic displays and repealing Commission Delegated Regulation (EU) No 1062/2010. EU Regulation 2017/1369 of the European Parliament and of the Council of 4 July 2017 setting a framework for energy labelling and repealing Directive 2010/30/EU. Israel Energy Sources (Maximum Electric Power in Standby Mode for Home and Office Appliances), 5771-2011 Regulations Jordan JSNO 2109/2013 Technical Regulation on eco-design requirements for standby and off mode electric power consumption of electrical and electronic household and office equipment Turkey: Ecodesign for Electronic Displays, Communiqué, (2019/2021/EU) SGM: (2021/5) Turkey: Ecodesign Requirements for Standby, Off and Networked Standby Mode Electric Power Consumption of Electrical and Electronic Household and Office Equipment, Communiqué (2008/1275/EC) (SGM: 2021/13) United Kingdom Ecodesign for Energy-Related Products Regulations 2010, SI 2010/2617 United Kingdom: Ecodesign for Energy-Related Products and Energy Information Regulations 2021, SI 2021/745
Requirements For EU Regulation 2019/2021 ecodesign requirements for Electronic Displays, see below. Refer to the regulation for more definitions and specific requirements including testing.
Definitions Electronic Display means a display screen and associated electronics that, as its primary function, displays visual information from wired or wireless sources; Monitor or computer monitor, or computer display means an Electronic Display intended for one person for close viewing such as in a desk-based environment; Status display means a display used to show simple but changing information such as selected channel, time or power consumption. A simple light indicator is not considered a status display; Control panel means an electronic display whose main function is to display images associated with product operational status; it may provide user interaction by touch or other means to control the product operation. It may be integrated into products or specifically designed and marketed to be used exclusively with the product; Professional display means an electronic display designed and marketed for professional use for editing video and graphic images. Its specification shall include all of the following features: (a) a contrast ratio of at least 1000:1 measured at a perpendicular to the vertical plane of the screen and at least 60:1 measured at a horizontal viewing angle of at least 85° relative to that perpendicular and at least 83° from the perpendicular on a curved screen, with or without a screen cover glass; (b) a native resolution of at least 2,3 mega pixels; (c) colour Gamut support greater or equal to 38,4 % of CIE LUV; (d) colour and luminance uniformity as specified for grade 1, 2 or 3 monitors in EBU Tech. 3320, as applicable to the professional application of the display.
Security display means an electronic display whose specification shall include all of the following features: A - self-monitoring function capable of communicating at least one of the following information to a remote server: -- power status; -- internal temperature from anti-overload thermal sensing; -- video source; -- audio source and audio status (volume/mute); -- model and firmware version;
PN 46G3772 Page 77 of 197 EC J85151 13MAY05
EC 899569 04NOV93 EC G32590 08FEB06
EC 899773 07DEC94 EC L04925B 11JAN07
EC F15040 25AUG97 EC L04925M 01AUG07
EC F73298 02SEP99 EC L04925N 19FEB08
EC F74336 05SEP00 EC L05962X 08AUG08
EC F72950 23JAN02 EC L79598 25FEB09
EC H64064 13MAY03 EC N24534E 02OCT09
EC H17205 29JUL03 EC L79598A 22FEB10
EC L79598B 22SEPT10
EC L79598C 27APR2011
EC L79598D 6SEPT2011
EC N31517Y 26MAR2012
ECN31946T 19APR2013
ECN33076 5DEC2013
ECN33076A 16MAY2014
ECN46883 17OCT2014
ECP02692 26MAY2015
ECO P02838 15OCT2015
ECOP17505 21APR2016
ECO P17633 1OCT2016
ECOP17764 20MAR2017
ECOP17905 16OCT2017
ECOP17958 Jan 25, 2018
ECOP44540 June 11, 2018
ECOP44680 Mar 5, 2019
ECOP44794 Aug 9, 2019
ECO P44877 15Feb2020
ECO P45188 1Sept2020
ECO P45272 9Mar2021
ECO P45379 18Oct2021
ECO 45443 4April2022
ECO P45475 14Nov2022
This document is the property of IBM. Its use is authorized only for responding to a request for quotation or for the performance of work for IBM. All questions must be referred to the IBM Procurement Department requesting the quotation or performance of work.
Engineering Specification
Page 78 of 197
B - user-specified specialist form factor facilitating the installation of the display into professional housings or consoles; Integrated referring to a display which is part of another product as a functional component, means an electronic display that is not able to be operated independently from the product and that depends on it for providing its functions, including power; Medical display means an electronic display covered by the scope of: (a) Council Directive 93/42/EEC (16) concerning medical devices; or (b) Regulation (EU) 2017/745 of the European Parliament and of the Council (17) on medical devices; or (c) Council Directive 90/385/EEC (18) on the approximation of the laws of the Member States relating to active implantable medical devices; or (d) Directive 98/79/EC of the European Parliament and of the Council (19) on in vitro diagnostic medical devices; or (e) Regulation (EU) 2017/746 of the European Parliament and of the Council (20) on in vitro diagnostic medical devices;
This regulation applies to electronic displays, including televisions, monitors and digital signage displays
This Regulation shall not apply to the following: (a) any Electronic Display with a screen area smaller than or equal to 100 square centimeters; (b) projectors; (c) all-in-one video conference systems; (d) medical displays; (e) virtual reality headsets; (f) displays integrated or to be integrated into products listed into Article 2, point 3(a) and point 4 of Directive 2012/19/EU (WEEE) (equipment which is necessary for the protection of the essential interests of the security of Member States, including arms, munitions and war material intended for specifically military purposes; equipment designed to be sent into space; large-scale stationary industrial tools; large-scale fixed installations, except any equipment which is not specifically designed and installed as part of those installations; means of transport for persons or goods, excluding electric two-wheel vehicles which are not type-approved; non-road mobile machinery made available exclusively for professional use; equipment specifically designed solely for the purposes of research and development that is only made available on a business-to-business basis; medical devices and in vitro diagnostic medical devices, where such devices are expected to be infective prior to end of life, and active implantable medical devices.) (g) electronic displays that are components or sub-assemblies as defined in point 2 of Article 2 of Directive 2009/125/EC; (h) industrial displays.
Requirements The requirements in points A (Energy Efficiency Requirements) and B (Allowances and Adjustments for the purpose of the EEI Calculation and functional requirements) of Annex II of this regulation shall not apply to the following displays: (a) broadcast displays; (b) professional displays; (c) security displays; (d) digital interactive whiteboards; (e) digital photo frames; (f) digital signage displays. For the displays above, points C (Off mode, standby and networked standby mode requirements), D (Material Efficiency Requirements) and E (Information Availability Requirements) of Annex II of this regulation do apply.
The requirements in points A, B and C (Off mode, standby and networked standby mode requirements) of Annex II of this regulation shall not apply to the following displays: (a) status displays; (b) control panels.
PN 46G3772 Page 78 of 197 EC J85151 13MAY05
EC 899569 04NOV93 EC G32590 08FEB06
EC 899773 07DEC94 EC L04925B 11JAN07
EC F15040 25AUG97 EC L04925M 01AUG07
EC F73298 02SEP99 EC L04925N 19FEB08
EC F74336 05SEP00 EC L05962X 08AUG08
EC F72950 23JAN02 EC L79598 25FEB09
EC H64064 13MAY03 EC N24534E 02OCT09
EC H17205 29JUL03 EC L79598A 22FEB10
EC L79598B 22SEPT10
EC L79598C 27APR2011
EC L79598D 6SEPT2011
EC N31517Y 26MAR2012
ECN31946T 19APR2013
ECN33076 5DEC2013
ECN33076A 16MAY2014
ECN46883 17OCT2014
ECP02692 26MAY2015
ECO P02838 15OCT2015
ECOP17505 21APR2016
ECO P17633 1OCT2016
ECOP17764 20MAR2017
ECOP17905 16OCT2017
ECOP17958 Jan 25, 2018
ECOP44540 June 11, 2018
ECOP44680 Mar 5, 2019
ECOP44794 Aug 9, 2019
ECO P44877 15Feb2020
ECO P45188 1Sept2020
ECO P45272 9Mar2021
ECO P45379 18Oct2021
ECO 45443 4April2022
ECO P45475 14Nov2022
This document is the property of IBM. Its use is authorized only for responding to a request for quotation or for the performance of work for IBM. All questions must be referred to the IBM Procurement Department requesting the quotation or performance of work.
Engineering Specification
Page 79 of 197
For status displays and control panels, the requirements in points D (Material Efficiency Requirements) and E (Information Availability Requirements) of Annex II of the regulation do apply.
These requirements are effective from 1 March 2021, except for the requirements in this paragraph only which are in effect at this time. The Electronic Display must not be designed to be able to detect they are being tested (e.g. by recognizing the test conditions or test cycle) and to react specifically by automatically altering their performance during the test with the aim of reaching a more favorable level, for any of the parameters required. The energy consumption of the product and any of the other declared parameters shall not deteriorate after a software or firmware update when measured with the same test standard originally used for the declaration of conformity, except with explicit consent of the end-user prior to the update. No performance change shall occur as a result of rejecting the update. A software update shall never have the effect of changing the product's performance in a way that makes it non-compliant with the ecodesign requirements applicable for the declaration of conformity.
The Electronic Display must meet all of the energy efficiency and ecodesign requirements as outlined in Annex II of the regulation. Control panels must meet the Material Efficiency requirements in Point D and Information availability requirements in Point E of Annex II of the regulation only.
Manufacturers shall ensure that joining, fastening or sealing techniques do not prevent the removal, using commonly available tools, of the components indicated in point 1 of Annex VII of Directive 2012/19/EU (WEEE) or in Article 11 of Directive 2006/66/EC on batteries and accumulators and waste batteries and accumulators. The derogations indicated in Article 11 of Directive 2006/66/EC about permanent connection between the electronic display and the battery or accumulator apply.
Manufacturers and importers shall make available, on a free-access website, the dismantling information needed to access the components referred to in point 1 of Annex VII of Directive 2012/19/EU (WEEE). This dismantling information shall include the sequence of dismantling steps, tools or technologies needed to access the targeted components. The end-of-life information shall be available until at least 15 years after the placing on the market of the last unit of a product model.
Plastic components > 50 grams shall be marked in accordance with Annex II of the regulation. See Section 2.3.2 of this specification or the regulation for more detail.
Electronic Displays which have concentration values of Cadmium (Cd) by weight in homogeneous materials exceeding 0.01 % as defined in Directive 2011/65/EU (RoHS) on the restriction of the use of certain hazardous substances in electrical and electronic equipment, shall be labeled with the `Cadmium inside' logo. The logo shall be clearly visible durable, legible and indelible. The logo shall be in the form of the following graphic:
The dimension of `a' shall be greater than 9 mm and the typeface to be used is `Gill Sans'. An additional `Cadmium inside' logo shall be firmly attached internally on the display panel or molded in a position clearly visible to workers once the external back cover bearing the external logo is removed. A `Cadmium free' logo shall be used if concentration values of Cadmium (Cd) by weight in any homogeneous material part of the display do not exceed 0.01 % as defined in Directive 2011/65/EU (RoHS).
The use of halogenated flame retardants is not allowed in the enclosure and stand of Electronic Displays.
PN 46G3772 Page 79 of 197 EC J85151 13MAY05
EC 899569 04NOV93 EC G32590 08FEB06
EC 899773 07DEC94 EC L04925B 11JAN07
EC F15040 25AUG97 EC L04925M 01AUG07
EC F73298 02SEP99 EC L04925N 19FEB08
EC F74336 05SEP00 EC L05962X 08AUG08
EC F72950 23JAN02 EC L79598 25FEB09
EC H64064 13MAY03 EC N24534E 02OCT09
EC H17205 29JUL03 EC L79598A 22FEB10
EC L79598B 22SEPT10
EC L79598C 27APR2011
EC L79598D 6SEPT2011
EC N31517Y 26MAR2012
ECN31946T 19APR2013
ECN33076 5DEC2013
ECN33076A 16MAY2014
ECN46883 17OCT2014
ECP02692 26MAY2015
ECO P02838 15OCT2015
ECOP17505 21APR2016
ECO P17633 1OCT2016
ECOP17764 20MAR2017
ECOP17905 16OCT2017
ECOP17958 Jan 25, 2018
ECOP44540 June 11, 2018
ECOP44680 Mar 5, 2019
ECOP44794 Aug 9, 2019
ECO P44877 15Feb2020
ECO P45188 1Sept2020
ECO P45272 9Mar2021
ECO P45379 18Oct2021
ECO 45443 4April2022
ECO P45475 14Nov2022
This document is the property of IBM. Its use is authorized only for responding to a request for quotation or for the performance of work for IBM. All questions must be referred to the IBM Procurement Department requesting the quotation or performance of work.
Engineering Specification
Page 80 of 197
Spare parts shall be made available according to the requirements in Annex II of the regulation.
Access to repair and maintenance information After a period of two years after the placing on the market of the first unit of a model or of an equivalent model, and until the end of the period mentioned under (a), the manufacturer shall provide access to the appliance repair and maintenance information to professional repairers. See the regulation for specific details such as registration, technical competence of the repairer, insurance coverage, and fees.
From 1 March 2021, the manufacturer shall make available the information below. The information shall be provided free of charge to third parties dealing with professional repair and reuse of Electronic Displays. 1. Availability of software and firmware updates. (a) The latest available version of the firmware shall be made available for a minimum period of eight years after the placing on the market of the last unit of a certain product model, free of charge or at a fair, transparent and nondiscriminatory cost. The latest available security update to the firmware shall be made available until at least eight years after the placing on the market of the last product of a certain product model, free of charge. (b) Information on the minimum guaranteed availability of software and firmware updates, availability of spare parts and product support shall be indicated in the product information sheet as from Annex V of Regulation (EU) 2019/2013.
The manufacturer of the electronic display must provide this information to IBM upon request including a Declaration of Conformity and Technical Documentation.
For EU Regulation 2019/2013 energy labeling of Electronic Displays see below. Refer to the regulation for more definitions and specific requirements. Definitions Electronic Display means a display screen and associated electronics that, as its primary function, displays visual information from wired or wireless sources; Monitor or computer monitor, or computer display means an electronic display intended for one person for close viewing such as in a desk based environment; Status display means a display used to show simple but changing information such as selected channel, time or power consumption. A simple light indicator is not considered a status display Control panel means an electronic display whose main function is to display images associated with product operational status; it may provide user interaction by touch or other means to control the product operation. It may be integrated into products or specifically designed and marketed to be used exclusively with the product; `security display' means an electronic display whose specification shall include all of the following features: (a) self-monitoring function capable of communicating at least one of the following information to a remote server: -- power status; -- internal temperature from anti-overload thermal sensing; -- video source; -- audio source and audio status (volume/mute); -- model and firmware version; (b) user-specified specialist form factor facilitating the installation of the display into professional housings or consoles; Medical display means an electronic display covered by the scope of: (a) Council Directive 93/42/EEC (10) concerning medical devices; or (b) Regulation (EU) 2017/745 of the European Parliament and of the Council (11) on medical devices; or (c) Council Directive 90/385/EEC (12) on the approximation of the laws of the Member States relating to active implantable medical devices; or (d) Directive 98/79/EC of the European Parliament and of the Council (13) on in vitro diagnostic medical devices; or (e) Regulation (EU) 2017/746 of the European Parliament and of the Council (14) on in vitro diagnostic medical devices.
Requirements see Regulation for more details and requirements
PN 46G3772 Page 80 of 197 EC J85151 13MAY05
EC 899569 04NOV93 EC G32590 08FEB06
EC 899773 07DEC94 EC L04925B 11JAN07
EC F15040 25AUG97 EC L04925M 01AUG07
EC F73298 02SEP99 EC L04925N 19FEB08
EC F74336 05SEP00 EC L05962X 08AUG08
EC F72950 23JAN02 EC L79598 25FEB09
EC H64064 13MAY03 EC N24534E 02OCT09
EC H17205 29JUL03 EC L79598A 22FEB10
EC L79598B 22SEPT10
EC L79598C 27APR2011
EC L79598D 6SEPT2011
EC N31517Y 26MAR2012
ECN31946T 19APR2013
ECN33076 5DEC2013
ECN33076A 16MAY2014
ECN46883 17OCT2014
ECP02692 26MAY2015
ECO P02838 15OCT2015
ECOP17505 21APR2016
ECO P17633 1OCT2016
ECOP17764 20MAR2017
ECOP17905 16OCT2017
ECOP17958 Jan 25, 2018
ECOP44540 June 11, 2018
ECOP44680 Mar 5, 2019
ECOP44794 Aug 9, 2019
ECO P44877 15Feb2020
ECO P45188 1Sept2020
ECO P45272 9Mar2021
ECO P45379 18Oct2021
ECO 45443 4April2022
ECO P45475 14Nov2022
This document is the property of IBM. Its use is authorized only for responding to a request for quotation or for the performance of work for IBM. All questions must be referred to the IBM Procurement Department requesting the quotation or performance of work.
Engineering Specification
Page 81 of 197
This regulation applies to electronic displays, including televisions, monitors and digital signage displays.
This Regulation shall not apply to the following: (a) any Electronic Display with a screen area smaller than or equal to 100 square centimeters; (b) projectors; (c) all-in-one video conference systems; (d) medical displays; (e) virtual reality headsets; (f) displays integrated or to be integrated into products listed in points 3(a) and 4 of Article 2 of Directive 2012/19/EU of the European Parliament and of the Council (8); (g) electronic displays that are components or subassemblies of products covered by implementing measures adopted under Directive 2009/125/EC; (h) broadcast displays; (i) security displays; (j) digital interactive whiteboards; (k) digital photo frames; (l) digital signage displays which meet any of the following characteristics: (1) designed and constructed as a display module to be integrated as a partial image area of a larger display screen area and not intended for use as a standalone display device; (2) distributed self-contained in an enclosure for permanent outdoor use; (3) distributed self-contained in an enclosure with a screen area less than 30 dm2 or greater than 130 dm2; (4) the display has a pixel density less than 230 pixels/cm2 or more than 3 025 pixels/cm2; (5) a peak white luminance in standard dynamic range (SDR) operating mode of greater than or equal to 1 000 cd/m2; (6) no video signal input interface and display drive allowing the correct display of a standardized dynamic video test sequence for power measurement purposes; (m) status displays; (n) control panels.
Supplier shall ensure that: Electronic Displays are labeled in a printed form in the format and containing the information set out in Annex III of this regulation. This label shall also be printed on the packaging or adhered to the packaging. The parameters of the product information sheet, found in Annex V of the regulation must be entered into the product database. The content of the technical documentation, found in Annex VI of the regulation, must be entered into the product database.
The following information shall be included in the label for Electronic Displays: I. QR code; II. supplier's name or trademark; III. supplier's model identifier; IV. scale of energy efficiency classes from A to G; V. the energy efficiency class determined in accordance with point B of Annex II when using PmeasuredSDR; VI. on mode energy consumption in kWh per 1 000 h, when playing SDR content, rounded to the nearest integer; VII. the energy efficiency class determined in accordance with point B of Annex II when using PmeasuredHDR; VIII. the on mode energy consumption in kWh per 1 000 h, when playing HDR content, rounded to the nearest integer; IX. visible screen diagonal in centimeters and inches and horizontal and vertical resolution in pixels; X. the number of this Regulation, that is `2019/2013'.
The label design must follow the format below (see regulation for dimensions, coloration, typeface, etc.)
PN 46G3772 Page 81 of 197 EC J85151 13MAY05
EC 899569 04NOV93 EC G32590 08FEB06
EC 899773 07DEC94 EC L04925B 11JAN07
EC F15040 25AUG97 EC L04925M 01AUG07
EC F73298 02SEP99 EC L04925N 19FEB08
EC F74336 05SEP00 EC L05962X 08AUG08
EC F72950 23JAN02 EC L79598 25FEB09
EC H64064 13MAY03 EC N24534E 02OCT09
EC H17205 29JUL03 EC L79598A 22FEB10
EC L79598B 22SEPT10
EC L79598C 27APR2011
EC L79598D 6SEPT2011
EC N31517Y 26MAR2012
ECN31946T 19APR2013
ECN33076 5DEC2013
ECN33076A 16MAY2014
ECN46883 17OCT2014
ECP02692 26MAY2015
ECO P02838 15OCT2015
ECOP17505 21APR2016
ECO P17633 1OCT2016
ECOP17764 20MAR2017
ECOP17905 16OCT2017
ECOP17958 Jan 25, 2018
ECOP44540 June 11, 2018
ECOP44680 Mar 5, 2019
ECOP44794 Aug 9, 2019
ECO P44877 15Feb2020
ECO P45188 1Sept2020
ECO P45272 9Mar2021
ECO P45379 18Oct2021
ECO 45443 4April2022
ECO P45475 14Nov2022
This document is the property of IBM. Its use is authorized only for responding to a request for quotation or for the performance of work for IBM. All questions must be referred to the IBM Procurement Department requesting the quotation or performance of work.
Engineering Specification
Page 82 of 197
The product information sheet must include the following:
PN 46G3772 Page 82 of 197 EC J85151 13MAY05
EC 899569 04NOV93 EC G32590 08FEB06
EC 899773 07DEC94 EC L04925B 11JAN07
EC F15040 25AUG97 EC L04925M 01AUG07
EC F73298 02SEP99 EC L04925N 19FEB08
EC F74336 05SEP00 EC L05962X 08AUG08
EC F72950 23JAN02 EC L79598 25FEB09
EC H64064 13MAY03 EC N24534E 02OCT09
EC H17205 29JUL03 EC L79598A 22FEB10
EC L79598B 22SEPT10
EC L79598C 27APR2011
EC L79598D 6SEPT2011
EC N31517Y 26MAR2012
ECN31946T 19APR2013
ECN33076 5DEC2013
ECN33076A 16MAY2014
ECN46883 17OCT2014
ECP02692 26MAY2015
ECO P02838 15OCT2015
ECOP17505 21APR2016
ECO P17633 1OCT2016
ECOP17764 20MAR2017
ECOP17905 16OCT2017
ECOP17958 Jan 25, 2018
ECOP44540 June 11, 2018
ECOP44680 Mar 5, 2019
ECOP44794 Aug 9, 2019
ECO P44877 15Feb2020
ECO P45188 1Sept2020
ECO P45272 9Mar2021
ECO P45379 18Oct2021
ECO 45443 4April2022
ECO P45475 14Nov2022
This document is the property of IBM. Its use is authorized only for responding to a request for quotation or for the performance of work for IBM. All questions must be referred to the IBM Procurement Department requesting the quotation or performance of work.
Engineering Specification
Page 83 of 197
The technical documentation shall include: (1) identification data (general description of the model): (a) trademark and model identifier; (b) supplier's name, address, registered trade name; (2) references to the harmonized standards applied, other measurement standards and specifications used in measuring the technical parameters and calculations performed; (3) specific precautions to be taken when the model is assembled, installed and tested; (4) a list of all equivalent models, including model identifiers; (5) measured technical parameters of the model and calculations performed with the measured parameters as listed below;
PN 46G3772 Page 83 of 197 EC J85151 13MAY05
EC 899569 04NOV93 EC G32590 08FEB06
EC 899773 07DEC94 EC L04925B 11JAN07
EC F15040 25AUG97 EC L04925M 01AUG07
EC F73298 02SEP99 EC L04925N 19FEB08
EC F74336 05SEP00 EC L05962X 08AUG08
EC F72950 23JAN02 EC L79598 25FEB09
EC H64064 13MAY03 EC N24534E 02OCT09
EC H17205 29JUL03 EC L79598A 22FEB10
EC L79598B 22SEPT10
EC L79598C 27APR2011
EC L79598D 6SEPT2011
EC N31517Y 26MAR2012
ECN31946T 19APR2013
ECN33076 5DEC2013
ECN33076A 16MAY2014
ECN46883 17OCT2014
ECP02692 26MAY2015
ECO P02838 15OCT2015
ECOP17505 21APR2016
ECO P17633 1OCT2016
ECOP17764 20MAR2017
ECOP17905 16OCT2017
ECOP17958 Jan 25, 2018
ECOP44540 June 11, 2018
ECOP44680 Mar 5, 2019
ECOP44794 Aug 9, 2019
ECO P44877 15Feb2020
ECO P45188 1Sept2020
ECO P45272 9Mar2021
ECO P45379 18Oct2021
ECO 45443 4April2022
ECO P45475 14Nov2022
This document is the property of IBM. Its use is authorized only for responding to a request for quotation or for the performance of work for IBM. All questions must be referred to the IBM Procurement Department requesting the quotation or performance of work.
Engineering Specification
Page 84 of 197
PN 46G3772 Page 84 of 197 EC J85151 13MAY05
EC 899569 04NOV93 EC G32590 08FEB06
EC 899773 07DEC94 EC L04925B 11JAN07
EC F15040 25AUG97 EC L04925M 01AUG07
EC F73298 02SEP99 EC L04925N 19FEB08
EC F74336 05SEP00 EC L05962X 08AUG08
EC F72950 23JAN02 EC L79598 25FEB09
EC H64064 13MAY03 EC N24534E 02OCT09
EC H17205 29JUL03 EC L79598A 22FEB10
EC L79598B 22SEPT10
EC L79598C 27APR2011
EC L79598D 6SEPT2011
EC N31517Y 26MAR2012
ECN31946T 19APR2013
ECN33076 5DEC2013
ECN33076A 16MAY2014
ECN46883 17OCT2014
ECP02692 26MAY2015
ECO P02838 15OCT2015
ECOP17505 21APR2016
ECO P17633 1OCT2016
ECOP17764 20MAR2017
ECOP17905 16OCT2017
ECOP17958 Jan 25, 2018
ECOP44540 June 11, 2018
ECOP44680 Mar 5, 2019
ECOP44794 Aug 9, 2019
ECO P44877 15Feb2020
ECO P45188 1Sept2020
ECO P45272 9Mar2021
ECO P45379 18Oct2021
ECO 45443 4April2022
ECO P45475 14Nov2022
This document is the property of IBM. Its use is authorized only for responding to a request for quotation or for the performance of work for IBM. All questions must be referred to the IBM Procurement Department requesting the quotation or performance of work.
Engineering Specification
Page 85 of 197
(6) Additional information requirements: (a) input terminal for the audio and video test signals used for testing; (b) information and documentation on the instrumentation, set-up and circuits used for electrical testing; (c) any other testing condition not described or determined in point (b); (d) for on mode: (i) the characteristics of the dynamic broadcast-content video signal representing typical broadcast TV content; for the HDR dynamic broadcast content video signal the electronic display must be automatically switched to HDR mode by the HDR metadata of that signal; (ii) the sequence of steps for achieving a stable condition with respect to power demand level; and (iii) the picture settings used for the brightest peak white luminance measurement and the test pattern for the video signal used for the measurement. (e) For standby and off mode: (i) the measurement method used; (ii) description of how the mode was selected or programmed including any enhanced reactivation functions; and (iii) sequence of events to reach the condition where the electronic display automatically changes mode. (f) For electronic displays with a designated computer signal interface: (i) confirmation that the electronic display prioritizes the computer display power management protocols set out in point 6.2.3 of Annex II of Commission Regulation (EU) No 617/2013 (1). Any deviation from the protocols should be reported; (g) For the networked electronic displays only: (i) number and type of network interfaces and, except for wireless network interfaces, their position in the electronic display; (ii) whether the electronic display qualifies as electronic display with HiNA functionality; if no information is provided the electronic display is considered not to be HiNA display or display with HiNA functionality; and (iii) information whether networked electronic display provides functionality allowing the power management function and/or the end-user to switch the electronic display being in a condition providing networked standby into standby mode, or off mode or another condition which does not exceed the applicable power demand requirements for off mode and/or standby mode including enhanced reactivation function power allowance where applicable. (h) For each type of network port: (i) the default time (mm:ss) after which the power management function, switches the display into a condition providing networked standby; and (ii) the trigger to be used to reactivate the electronic display. (7) where the information included in the technical documentation file for a particular electronic display model has been obtained: (a) from a model that has the same technical characteristics relevant for the technical information to be provided but is produced by a different manufacturer or (b) by calculation on the basis of design or by extrapolation from another model of the same or of a different supplier, or both; the technical documentation shall include, as appropriate, the details of such calculation, the assessment undertaken by suppliers to verify the accuracy of the calculation and, where appropriate, the declaration of identity between the models of different suppliers; and (8) the contact details of the person empowered to bind the supplier, if not included in the technical information uploaded into the database, shall be made available, on request, to market surveillance authorities or to the Commission for carrying out their tasks under this Regulation.
See the regulation for complete details of the information required to be provided in visual advertisements, in technical promotional material in distance selling and in telemarketing, except distance selling on the internet
PN 46G3772 Page 85 of 197 EC J85151 13MAY05
EC 899569 04NOV93 EC G32590 08FEB06
EC 899773 07DEC94 EC L04925B 11JAN07
EC F15040 25AUG97 EC L04925M 01AUG07
EC F73298 02SEP99 EC L04925N 19FEB08
EC F74336 05SEP00 EC L05962X 08AUG08
EC F72950 23JAN02 EC L79598 25FEB09
EC H64064 13MAY03 EC N24534E 02OCT09
EC H17205 29JUL03 EC L79598A 22FEB10
EC L79598B 22SEPT10
EC L79598C 27APR2011
EC L79598D 6SEPT2011
EC N31517Y 26MAR2012
ECN31946T 19APR2013
ECN33076 5DEC2013
ECN33076A 16MAY2014
ECN46883 17OCT2014
ECP02692 26MAY2015
ECO P02838 15OCT2015
ECOP17505 21APR2016
ECO P17633 1OCT2016
ECOP17764 20MAR2017
ECOP17905 16OCT2017
ECOP17958 Jan 25, 2018
ECOP44540 June 11, 2018
ECOP44680 Mar 5, 2019
ECOP44794 Aug 9, 2019
ECO P44877 15Feb2020
ECO P45188 1Sept2020
ECO P45272 9Mar2021
ECO P45379 18Oct2021
ECO 45443 4April2022
ECO P45475 14Nov2022
This document is the property of IBM. Its use is authorized only for responding to a request for quotation or for the performance of work for IBM. All questions must be referred to the IBM Procurement Department requesting the quotation or performance of work.
Engineering Specification
Page 86 of 197
Information to be provided for distance selling through the internet: 1. The appropriate label made available according to 1(g) of Article 3 of the regulation shall be shown on the display mechanism in proximity to the price of the product. The size shall be such that the label is clearly visible and legible and shall be proportionate to the size specified in 2(a) of Annex III of the regulation. The label may be displayed using a nested display, in which case the image used for accessing the label shall comply with the specifications laid down in point 3 of this Annex. If a nested display is applied, the label shall appear on the first mouse click, mouse rollover or tactile screen expansion on the image. 2. The image used for accessing the label in the case of nested display, as indicated in Figure 2 below, shall: (a) be an arrow in the color corresponding to the energy efficiency class of the product on the label; (b) indicate the energy efficiency class of the product on the arrow in 100 % white, Calibri Bold and in a font size equivalent to that of the price; (c) have the range of available energy efficiency classes in 100 % black; and, (d) have one of the following two formats, and its size shall be such that the arrow is clearly visible and legible. The letter in the energy efficiency class arrow shall be positioned in the center of the rectangular part of the arrow, with a visible border in 100 % black placed around the arrow and the letter of the energy efficiency class:
3. In the case of nested display, the sequence of display of the label shall be as follows: (a) the image referred to in point 2 of this Annex shall be shown on the display mechanism in proximity to the price of the product; (b) the image shall link to the label set out in Annex III; (c) the label shall be displayed after a mouse click, mouse roll-over or tactile screen expansion on the image; (d) the label shall be displayed by pop up, new tab, new page or inset screen display; (e) for magnification of the label on tactile screens, the device conventions for tactile magnification shall apply; (f) the label shall cease to be displayed by means of a close option or other standard closing mechanism; and (g) the alternative text for the graphic, to be displayed on failure to display the label, shall be the energy efficiency class of the product in a font size equivalent to that of the price. 4. The appropriate product information sheet made available by suppliers in accordance 1(h) of Article 3 of the regulation shall be shown on the display mechanism in proximity to the price of the product. The size shall be such that the product information sheet is clearly visible and legible. The product information sheet may be displayed using a nested display or by referring to the product database in which case the link used for accessing the product information sheet shall clearly and legibly indicate `Product information sheet'. If a nested display is used, the product information sheet shall appear on the first mouse click, mouse roll-over or tactile screen expansion on the link.
The manufacturer of the electronic display must provide this information to IBM upon request including a Declaration of Conformity and Technical Documentation
Requirements for Australia and New Zealand References Australia Greenhouse and Energy Minimum Standards Act 2012 Australia Greenhouse and Energy Minimum Standards (Computer Monitors) Determination 2013 Computer Monitors Information Sheet from the New Zealand Energy Efficiency and Conservation Authority September 2019 Additional information for this program can be found at http://www.energyrating.gov.au/ and https://www.eeca.govt.nz/standards-ratings-and-labels/equipment-energy-efficiency-programme/about-the-e3programme/#meps
Definitions Computer monitor A commercially available product with a display screen and associated electronics, encased in a single housing that as its primary function displays visual information from a computer, workstation or server, including via a wireless connection. This includes LCD, LED, CRT, and plasma display panels (PDP).
PN 46G3772 Page 86 of 197 EC J85151 13MAY05
EC 899569 04NOV93 EC G32590 08FEB06
EC 899773 07DEC94 EC L04925B 11JAN07
EC F15040 25AUG97 EC L04925M 01AUG07
EC F73298 02SEP99 EC L04925N 19FEB08
EC F74336 05SEP00 EC L05962X 08AUG08
EC F72950 23JAN02 EC L79598 25FEB09
EC H64064 13MAY03 EC N24534E 02OCT09
EC H17205 29JUL03 EC L79598A 22FEB10
EC L79598B 22SEPT10
EC L79598C 27APR2011
EC L79598D 6SEPT2011
EC N31517Y 26MAR2012
ECN31946T 19APR2013
ECN33076 5DEC2013
ECN33076A 16MAY2014
ECN46883 17OCT2014
ECP02692 26MAY2015
ECO P02838 15OCT2015
ECOP17505 21APR2016
ECO P17633 1OCT2016
ECOP17764 20MAR2017
ECOP17905 16OCT2017
ECOP17958 Jan 25, 2018
ECOP44540 June 11, 2018
ECOP44680 Mar 5, 2019
ECOP44794 Aug 9, 2019
ECO P44877 15Feb2020
ECO P45188 1Sept2020
ECO P45272 9Mar2021
ECO P45379 18Oct2021
ECO 45443 4April2022
ECO P45475 14Nov2022
This document is the property of IBM. Its use is authorized only for responding to a request for quotation or for the performance of work for IBM. All questions must be referred to the IBM Procurement Department requesting the quotation or performance of work.
Engineering Specification
Page 87 of 197
Requirements Computer monitors must meet the minimum energy performance standards (MEPS) and energy rating label requirements as found in AS/NZS 5815.1:2013 and AS/NZS 5815.2:2013. There are multiple displays which these standards do not apply to, for example, specialized electronic displays intended for use primarily in commercial and professional fields, not intended for sale to the general public. Also excluded are displays which are built-in or have integrated networking functionality, the circuitry for which cannot be physically separated or switched independently from the electronic display component. Rack mount monitors are excluded from these requirements.
Computer monitors are required to have the six star, or ten star label affixed to the product, as outlined in Section 26 of the Greenhouse and Energy Minimum Standards Act 2012 and section 7 of the Greenhouse and Energy Minimum Standards (Computer Monitors) determination 2013. The label may also be placed on the packaging. The format of the labels is in Schedule 1 and Schedule 2 of the Greenhouse and Energy Minimum Standards (Computer Monitors) Determination 2013.
Suppliers are required to supply IBM a copy of the test report and a confirmation the product has been registered in Australia and New Zealand.
Requirements for Vietnam References Vietnam Decision 51/2011/QD-TTg List of Vehicles and Equipment subject to Energy Labeling and Minimum Energy Performance Regulations and a Road Map for Implementing Regulations. Vietnam Standard TCVN 9508: 2012 Computer monitor energy efficiency. Vietnam Circular No 36/2016/TT-BCT on Energy labeling for means and equipment using energy under management of the Ministry of Industry and Trade. Vietnam No 04/2017/QD-TTg Decision on promulgating the list of devices and equipment subject to energy labeling, application of minimum energy efficiency and the implementation roadmap.
Definitions High performance monitors: Electronic monitors that use In-Plane Switching (IPS) or Vertical Alignment technologies and achieve: ·Actual resolution is greater or equal to 2.3 (1920 x 1200) MP; and ·View angle is wider or equal to 1780 (the minimum contrast ratio 1:10); and ·The width of color stripe is greater or equal to 72% NTSC; and ·Diagonal size is greater or equal to 61 cm (24 inch).
Dedicated monitors: used in specialized fields, trades, techniques, medicine, graphics, etc. and the ones that are not sold to public such as: ·The products are defined as professional ones in the scope of vi EN 55103. ·The medical products are regulated in the standard TCVN 7303 (IEC 60601). ·The products are in accordance with Digital Imaging and Communications in Medicine (DICOM) standard (for electronic monitors used in medical industry). The products are used in diagnostic applications in medicine with the power condition inappropriate with the definition of Active Standby Mode (Sleep), (e.g. the specifications of FDA for medical equipment requires to maintain the brightness during using process of electronic equipment, together with other requirements which does not allow such electronic equipment to function power control). ·The products can display content through Serial Digital Interface (SDI) including equipment in medicine produced to diagnose, treat or monitor patients' condition.
Some of monitors with other special functions: The products have the function of electronically displaying video and other functions including one or more functions below: ·The built-in or integrated networking function, the circuit cannot be physically split or separated from electronic display equipment. Examples for this function include but not limited to video conference, VoIP and PcoIP capabilities ·The 3D integrated PC, tablets, eBooks, smart phones and Personal Digital Assistant.
PN 46G3772 Page 87 of 197 EC J85151 13MAY05
EC 899569 04NOV93 EC G32590 08FEB06
EC 899773 07DEC94 EC L04925B 11JAN07
EC F15040 25AUG97 EC L04925M 01AUG07
EC F73298 02SEP99 EC L04925N 19FEB08
EC F74336 05SEP00 EC L05962X 08AUG08
EC F72950 23JAN02 EC L79598 25FEB09
EC H64064 13MAY03 EC N24534E 02OCT09
EC H17205 29JUL03 EC L79598A 22FEB10
EC L79598B 22SEPT10
EC L79598C 27APR2011
EC L79598D 6SEPT2011
EC N31517Y 26MAR2012
ECN31946T 19APR2013
ECN33076 5DEC2013
ECN33076A 16MAY2014
ECN46883 17OCT2014
ECP02692 26MAY2015
ECO P02838 15OCT2015
ECOP17505 21APR2016
ECO P17633 1OCT2016
ECOP17764 20MAR2017
ECOP17905 16OCT2017
ECOP17958 Jan 25, 2018
ECOP44540 June 11, 2018
ECOP44680 Mar 5, 2019
ECOP44794 Aug 9, 2019
ECO P44877 15Feb2020
ECO P45188 1Sept2020
ECO P45272 9Mar2021
ECO P45379 18Oct2021
ECO 45443 4April2022
ECO P45475 14Nov2022
This document is the property of IBM. Its use is authorized only for responding to a request for quotation or for the performance of work for IBM. All questions must be referred to the IBM Procurement Department requesting the quotation or performance of work.
Engineering Specification
Page 88 of 197
Requirements Computer monitors must meet the minimum energy performance standard as required in Vietnam Decision 51/2011/QD-TTg and Vietnam standard TCVN 9508: 2012 Computer monitor energy efficiency, which requires a sleep/standby mode of less than or equal to 2.0W and an off mode power draw of less than or equal to 1.0W. Labeling monitors as outlined by this regulation is voluntary.
Vietnam Standard TCVN 9508: 2012 Computer monitor energy efficiency does not apply to High performance monitors, dedicated monitors or some monitors with special functions (see definitions).
Requirements for California, Hawaii, Oregon, Vermont, Washington, and Colorado References California Appliance Efficiency (CEC) Regulations Appliance Efficiency Rulemaking for Computers, Computer Monitors, and Signage Displays. Regulation and details are located at: http://www.energy.ca.gov/ Washington Appliance Efficiency Standards Chapter 286, Laws of 2019 Colorado Revised Statutes Article 7.5 Water and Energy Efficiency Standards Hawaii: Adoption of Water and Energy Efficiency Standards, House Bill 556, Act 141, 2019 Oregon: State-Regulated Appliance Efficiency Standards, OAR 330-092, Amendment (on efficiency standards, product definitions, conformance and certification), Final Rule, OAR 330-92-010-020, August 2020 Vermont: Energy Efficiency Standards For Appliances, 9 V.S.A. 2791 -2798 - Amendment - (on standards for electronics, lighting and water appliances), House Bill 410, Act 139, 2018
Definitions Computer monitor means an analog or digital device of diagonal screen size greater than or equal to 17 inches and less than or equal to 61 inches, that has a pixel density of greater than 5000 pixels per square inch, and that is designed primarily for the display of computer generated signals not marketed for use as a television for viewing by one person in a desk-based environment. A computer monitor is composed of a display screen and associated electronics. A computer monitor does not include: (1) Displays with integrated or replaceable batteries designed to support primary operation without AC mains or external DC power, (e.g., electronic readers, mobile phones, portable tablets, battery-powered digital picture frames), or (2) A television or a signage display. Keyboard, video, and mouse (KVM) or keyboard, mouse, and monitor (KMM) means a computer monitor that can operate with a KVM switch and is designed to be used in a server rack for use solely in a data center. Medical computer monitor means a computer monitor that meets the definition of a device contained in Section 210(h) of the US Federal Food, Drug, and Cosmetic Act (21 U.S.C. § 321(h)) and is listed and approved as such by the U.S. Food and Drug Administration. See the CEC Regulations for additional definitions, test methods, and details.
Requirements Computer monitors manufactured on or after July 1, 2019, shall comply with the energy efficiency standards in CEC Appliance Efficiency Rulemaking for Computers, Computer Monitors, and Signage Displays in Section 1605.3 including Table V-4. Medical computer monitors are not required to comply with Section 1605.3(v)(4) or the test procedures in Section 1604(v)(4).
Manufacturers of Computer monitors, and Medical computer monitors must comply with the certification requirements in Section 1606 of Title 20 of the CEC Appliance Efficiency Regulation (Filing by Manufacturers with the State of California) for each of the products sold or offered for sale in California as well as the marking requirements in Section 1607 of Title 20 of the CEC Appliance Efficiency Regulation (manufacturer's name, model number and date of manufacture).
PN 46G3772 Page 88 of 197 EC J85151 13MAY05
EC 899569 04NOV93 EC G32590 08FEB06
EC 899773 07DEC94 EC L04925B 11JAN07
EC F15040 25AUG97 EC L04925M 01AUG07
EC F73298 02SEP99 EC L04925N 19FEB08
EC F74336 05SEP00 EC L05962X 08AUG08
EC F72950 23JAN02 EC L79598 25FEB09
EC H64064 13MAY03 EC N24534E 02OCT09
EC H17205 29JUL03 EC L79598A 22FEB10
EC L79598B 22SEPT10
EC L79598C 27APR2011
EC L79598D 6SEPT2011
EC N31517Y 26MAR2012
ECN31946T 19APR2013
ECN33076 5DEC2013
ECN33076A 16MAY2014
ECN46883 17OCT2014
ECP02692 26MAY2015
ECO P02838 15OCT2015
ECOP17505 21APR2016
ECO P17633 1OCT2016
ECOP17764 20MAR2017
ECOP17905 16OCT2017
ECOP17958 Jan 25, 2018
ECOP44540 June 11, 2018
ECOP44680 Mar 5, 2019
ECOP44794 Aug 9, 2019
ECO P44877 15Feb2020
ECO P45188 1Sept2020
ECO P45272 9Mar2021
ECO P45379 18Oct2021
ECO 45443 4April2022
ECO P45475 14Nov2022
This document is the property of IBM. Its use is authorized only for responding to a request for quotation or for the performance of work for IBM. All questions must be referred to the IBM Procurement Department requesting the quotation or performance of work.
Engineering Specification
Page 89 of 197
Exceptions to the California regulation section 1605.3(v)(4): The following computer monitors are not required to comply with section 1605.3(v)(4) but shall comply with the test procedures in section 1604(v)(3), the certification requirements in section 1606, and the marking requirements in section 1607 of this Article: 1. KVMs. 2. KMMs. 3. Very high performance monitors.
Exception to California regulation section 1605.3(v)(4): Medical computer monitors are not required to comply with section 1605.3(v)(4) or the test procedures in section 1604(v)(3) but shall comply with the certification requirements in section 1606 and the marking requirements in section 1607.
Requirements for British Columbia References British Columbia Energy Efficiency Standards Regulation, 14/2015 B.C. Reg. 35/2021 amending Energy Efficiency Standards Regulation B.C. Reg. 14/2015
Definitions (British Columbia) Computer monitor means an analog or digital device that (a) is designed primarily to display computer-generated signals for viewing by one person in a desk-based environment, (b) has a diagonal screen size of (i) not less than 17 inches, and (ii) not more than 61 inches, (c) has a pixel density of greater than 5000 pixels per square inch, and (d) is composed of a display screen and associated electronics;
For the purpose of the definition of "computer monitor" above, the following are excluded: (a) a monitor that
(i) can operate with a keyboard, video and mouse switch, and (ii) is designed to be used in a server rack for use solely in a data centre; (b) a medical computer monitor; (c) an analog or digital device designed primarily for the display of computer-generated signals that is not marketed for use as a computer monitor or a television; (d) a television; (e) a display with integrated or replaceable batteries, including an electronic reader, a mobile phone, a tablet, or a digital picture frame, that is designed to support primary operation without alternating current electrical power or external direct current electrical power
Requirements (British Columbia) Computer monitors manufactured on or after July 1, 2021, shall meet the efficiency values in the table listed under section 69, and the Max on-mode power consumption under section 70 of Division 4 of Part 9 of B.C. Reg No. 14/2015. An energy efficiency verification label is not required if the product is listed in California Energy Commission Modernized Appliance Efficiency Database System. For specific definitions, requirements, implementation dates and exemptions, see Part 9 of B.C. Reg No. 14/2015.
Requirements for Mexico Reference Mexico Catalog of the Equipment and Apparatus for which the manufacturers, importers, distributors and sellers should provide information about power consumption and forms for providing information
Requirements Stand-alone monitors must have a label, in Spanish, with the following information: Power Consumption by unit of time in operation;
PN 46G3772 Page 89 of 197 EC J85151 13MAY05
EC 899569 04NOV93 EC G32590 08FEB06
EC 899773 07DEC94 EC L04925B 11JAN07
EC F15040 25AUG97 EC L04925M 01AUG07
EC F73298 02SEP99 EC L04925N 19FEB08
EC F74336 05SEP00 EC L05962X 08AUG08
EC F72950 23JAN02 EC L79598 25FEB09
EC H64064 13MAY03 EC N24534E 02OCT09
EC H17205 29JUL03 EC L79598A 22FEB10
EC L79598B 22SEPT10
EC L79598C 27APR2011
EC L79598D 6SEPT2011
EC N31517Y 26MAR2012
ECN31946T 19APR2013
ECN33076 5DEC2013
ECN33076A 16MAY2014
ECN46883 17OCT2014
ECP02692 26MAY2015
ECO P02838 15OCT2015
ECOP17505 21APR2016
ECO P17633 1OCT2016
ECOP17764 20MAR2017
ECOP17905 16OCT2017
ECOP17958 Jan 25, 2018
ECOP44540 June 11, 2018
ECOP44680 Mar 5, 2019
ECOP44794 Aug 9, 2019
ECO P44877 15Feb2020
ECO P45188 1Sept2020
ECO P45272 9Mar2021
ECO P45379 18Oct2021
ECO 45443 4April2022
ECO P45475 14Nov2022
This document is the property of IBM. Its use is authorized only for responding to a request for quotation or for the performance of work for IBM. All questions must be referred to the IBM Procurement Department requesting the quotation or performance of work.
Engineering Specification
Page 90 of 197
The type of energy or power used, which should indicate the measurement units, unless by its operational nature, the type of power or energy is evidently identifiable, in which case it will not be necessary to include this requirement on the labeling;
Quantity of the good, product or service offered by the equipment per unit of energy consumed when applicable.
The manufacturer must submit the forms found in the Mexico Catalog of the Equipment and Apparatus for which the manufacturers, importers, distributors and sellers should provide information about power consumption and forms for providing information to the Mexico National Commission for Efficient Energy Use (CONUEE). A copy of these forms must be supplied to IBM.
2.12.2 External Power Supplies and Adapters
References Australia/New Zealand Minimum Energy Performance Requirements for External Power Supplies Canada Energy Efficiency Act and Energy Efficiency Regulations Canada NRCAN guidelines for EPSs European Union, Turkey and other jurisdictions transposing EU regulations Commission Regulation (EU) 2019/1782 of 1 October 2019 laying down ecodesign requirements for external power supplies pursuant to Directive 2009/125/EC. Jordan JSNO 2111/2013 Technical Regulation on eco-design requirements for no-load condition electric power consumption and average active efficiency of external power supplies; JSNO 2090/2013 Technical Regulation on eco-design requirements for energy related Products Korea Regulation on Energy Efficiency Labeling and Standards, July 31, 2008 Mexico Official Standard NOM-029-ENER-2017 Energy efficiency of external power supplies. Limits, test methods, marks and labels. New Zealand External Power Supplies Information sheet from the Energy Efficiency and Conservation Authority September 2019. Norway Environmentally Friendly Design of Energy-Related Products, Regulation No. 190, 2011 - Amendment (on implementing ecodesign requirements for electric motors, transformers, and external power supplies) Regulation No. 1977, 2020 Turkey Ecodesign Requirements of External Power Supplies, Communiqué, (2019/1782/EU) (SGM:2020/5) United Kingdom Ecodesign for Energy-Related Products and Energy Information (Amendment) (EU Exit) Regulations 2020, SI 2020/1528 United Kingdom Ecodesign for Energy-Related Products Regulations 2010, SI 2010/2617 United States Federal Energy Conservation Program: Energy Conservation Standards for External Power Supplies Standards: http://www1.eere.energy.gov/buildings/appliance_standards/product.aspx?productid=23. United States Energy Conservation Program for Consumer Products, Rules, 10 CFR 430, 1989 - Amendment - (on test procedure for external power supplies, providing additional instructions, etc.), Final Rule, 87 FR 51200, August 2022 United States Department of Energy Guidance Document Definitions and scope of coverage for EPSs. December 20, 2017. United States CA Code of Regulations, Title 20 Section 1601-1608 United States Oregon Minimum Energy Efficiency Standards for State-regulated appliances and equipment United States Washington DC Energy Efficiency Standards DC § Code 8-1771
Definitions Australia/ New Zealand "Single output external power supply" means an appliance that is designed to supply power to other appliances and that:
(a)has an input from mains supply; Note: This input is usually 110 volts, 60 hertz; 230 volts, 50 hertz; 240 volts, 50 hertz or a range including some or all of these input conditions.
PN 46G3772 Page 90 of 197 EC J85151 13MAY05
EC 899569 04NOV93 EC G32590 08FEB06
EC 899773 07DEC94 EC L04925B 11JAN07
EC F15040 25AUG97 EC L04925M 01AUG07
EC F73298 02SEP99 EC L04925N 19FEB08
EC F74336 05SEP00 EC L05962X 08AUG08
EC F72950 23JAN02 EC L79598 25FEB09
EC H64064 13MAY03 EC N24534E 02OCT09
EC H17205 29JUL03 EC L79598A 22FEB10
EC L79598B 22SEPT10
EC L79598C 27APR2011
EC L79598D 6SEPT2011
EC N31517Y 26MAR2012
ECN31946T 19APR2013
ECN33076 5DEC2013
ECN33076A 16MAY2014
ECN46883 17OCT2014
ECP02692 26MAY2015
ECO P02838 15OCT2015
ECOP17505 21APR2016
ECO P17633 1OCT2016
ECOP17764 20MAR2017
ECOP17905 16OCT2017
ECOP17958 Jan 25, 2018
ECOP44540 June 11, 2018
ECOP44680 Mar 5, 2019
ECOP44794 Aug 9, 2019
ECO P44877 15Feb2020
ECO P45188 1Sept2020
ECO P45272 9Mar2021
ECO P45379 18Oct2021
ECO 45443 4April2022
ECO P45475 14Nov2022
This document is the property of IBM. Its use is authorized only for responding to a request for quotation or for the performance of work for IBM. All questions must be referred to the IBM Procurement Department requesting the quotation or performance of work.
Engineering Specification
Page 91 of 197
(b)has one extra low voltage output (either alternating current or direct current) that is either at a fixed voltage or a user selectable voltage through a selector switch;
(c)is sold with, or intended to be used with, a separate end-use product that constitutes the primary load on the power supply; Note: These units are often used to power/re-charge laptop computers, mobile telephones, portable stereo units and other portable household devices. It is immaterial whether or not the power supply and end use product are packaged separately or together.
(d)Is contained in a separate physical enclosure from the end-use product; Note these units cannot be built into the equipment being powered and hence are `external' to the device being powered. The housings of the EPS and its associated end use product are different. Designs covered include units with an integral mains plug, `in-line' units and units with provision for equipment to sit in a cradle whilst being used.
(e)is connected to the end-use product via a hard-wired or removable male/female electrical connection, cable, cord or other wiring;
(f) Does not have batteries, or battery packs, that physically attach directly to the power supply unit (either permanently or only for the purpose of charging); Note this includes batteries that are removable from the power supply unit. For example, a battery pack for a portable electric drill; and
(g)Does not have either: a battery chemistry, or type selector, switch; or an indicator light or state of charge meter.
For Australia/New Zealand, external power supplies used only internal to a rack system are out of scope.
United States - Federal and California External power supply means an external power supply circuit that is used to convert household electric current into DC current or lower-voltage AC current to operate a consumer product. However, the term does not include any "commercial and industrial power supply" as defined in this section, or a power supply circuit, driver, or device that is designed exclusively to be connected to, and power -
(1) Light-emitting diodes providing illumination. (2) Organic light-emitting diodes providing illumination; or (3) Ceiling fans using direct current motors. Class A external power supply a device that:
(1)is designed to convert line voltage AC input into lower voltage AC or DC output; (2)is able to convert to only 1 AC or DC output voltage at a time; (3)is sold with, or intended to be used with, a separate end-use product that constitutes the primary load; (4)is contained in a separate physical enclosure from the end-use product; (5)is connected to the end-use product via a removable or hard-wired male/female electrical connection,
cable, cord, or other wiring; and (6)Has nameplate output power that is less than or equal to 250 watts. Class A EPS does not include any device that Requires Federal Food and Drug Administration listing and approval as a medical device in accordance with section 513 of the Federal Food, Drug, and Cosmetic Act (21 U.S.C. 360c); or Powers the charge of a detachable battery pack or charges the battery or a product that is fully or primarily motor operated. Commercial and industrial power supply means a power supply that is used to convert electric current into DC or lower-voltage AC current, is not distributed in commerce for use with a consumer product, and may include any of the following characteristics: (1)A power supply that requires 3-phase input power and that is incapable of operating on household mains electricity. (2)A DC-DC-only power supply that is incapable of operating on household mains electricity. (3)A power supply with a fixed, non-removable connection to an end-use device that is not a consumer product as defined under the Act; (4)A power supply whose output connector is uniquely shaped to fit only an end-use device that is not a consumer product; (5)A power supply that cannot be readily connected to an end-use device that is a consumer product without significant modification or customization of the power supply itself or the end-use device;
PN 46G3772 Page 91 of 197 EC J85151 13MAY05
EC 899569 04NOV93 EC G32590 08FEB06
EC 899773 07DEC94 EC L04925B 11JAN07
EC F15040 25AUG97 EC L04925M 01AUG07
EC F73298 02SEP99 EC L04925N 19FEB08
EC F74336 05SEP00 EC L05962X 08AUG08
EC F72950 23JAN02 EC L79598 25FEB09
EC H64064 13MAY03 EC N24534E 02OCT09
EC H17205 29JUL03 EC L79598A 22FEB10
EC L79598B 22SEPT10
EC L79598C 27APR2011
EC L79598D 6SEPT2011
EC N31517Y 26MAR2012
ECN31946T 19APR2013
ECN33076 5DEC2013
ECN33076A 16MAY2014
ECN46883 17OCT2014
ECP02692 26MAY2015
ECO P02838 15OCT2015
ECOP17505 21APR2016
ECO P17633 1OCT2016
ECOP17764 20MAR2017
ECOP17905 16OCT2017
ECOP17958 Jan 25, 2018
ECOP44540 June 11, 2018
ECOP44680 Mar 5, 2019
ECOP44794 Aug 9, 2019
ECO P44877 15Feb2020
ECO P45188 1Sept2020
ECO P45272 9Mar2021
ECO P45379 18Oct2021
ECO 45443 4April2022
ECO P45475 14Nov2022
This document is the property of IBM. Its use is authorized only for responding to a request for quotation or for the performance of work for IBM. All questions must be referred to the IBM Procurement Department requesting the quotation or performance of work.
Engineering Specification
Page 92 of 197
A power supply packaged with an end-use device that is not a consumer product, as evidenced by either: (i) Such device being certified as, or declared to be in conformance with, a specific standard applicable only to non-consumer products. For example, a power supply model intended for use with an end-use device that is certified to the following standards would not meet the EPCA definition of an EPS:
(A) CISPR 11 (Class A Equipment), "Industrial, scientific and medical equipment - Radio-frequency disturbance - Limits and methods of measurement"; (B) UL 1480A, "Standard for Speakers for Commercial and Professional Use"; (C) UL 813, "Standard for Commercial Audio Equipment"; and (D) UL 1727, "Standard for Commercial Electric Personal Grooming Appliances"; or (ii) Such device being excluded or exempted from inclusion within, or conformance with, a law, regulation, or broadly-accepted industry standard where such exclusion or exemption applies only to non-consumer products; (7) A power supply distributed in commerce for use with an end-use device where: (i) The end-use device is not a consumer product, as evidenced by either the circumstances in paragraph (6)(i) or (ii) of this definition; and (ii) The end-use device for which the power supply is distributed in commerce is reasonably disclosed to the public, such as by identification of the end-use device on the packaging for the power supply, documentation physically present with the power supply, or on the manufacturer's or private labeler's public website; or (8) A power supply that is not marketed for residential or consumer use, and that is clearly marked (or, alternatively, the packaging of the individual power supply, the shipping container of multiple such power supplies, or associated documentation physically present with the power supply when distributed in commerce is clearly marked) "FOR USE WITH COMMERCIAL OR INDUSTRIAL EQUIPMENT ONLY" or "NOT FOR RESIDENTIAL OR CONSUMER USE," with the marking designed and applied so that the marking will be visible and legible during customary conditions for the item on which the marking is placed. (6) See Exemption entry in this section for additional exemption information. Single-voltage external AC-DC power supply means an external power supply that is designed to convert line voltage AC into lower-voltage DC output and is able to convert to only one DC output voltage at a time. Single-voltage external AC-AC power supply means an external power supply that is designed to convert line voltage AC into lower-voltage AC output and is able to convert to only one AC output voltage at a time. Multiple-voltage external power supply means an external power supply that is designed to convert line voltage AC input into more than one simultaneous lower-voltage output. Low-voltage external power supply means an external power supply with a nameplate output voltage less than 6 volts and nameplate output current greater than or equal to 550 milliamps. Basic-voltage external power supply means an external power supply that is not a low-voltage power supply. Basic-voltage external power supply means an external power supply that is not a low-voltage external power supply. Direct operation external power supply means an external power supply that can operate a consumer product that is not a battery charger without the assistance of a battery. Indirect operation external power supply means an external power supply that cannot operate a consumer product that is not a battery charger without the assistance of a battery.
California Consumer product means any article, other than an automobile, as defined in 49 U.S.C. section 32901(a) (3): (1) of a type which in operation consumes, or is designed to consume, energy or, with respect to showerheads, faucets, water closets, and urinals, water; and which, to any significant extent, is distributed in commerce for personal use or consumption by individuals; (2) Without regard to whether such article of such type is in fact distributed in commerce for personal use or consumption by an individual, except that such term includes fluorescent lamp ballasts, general service fluorescent lamps, incandescent reflector lamps, showerheads, faucets, water closets, and urinals distributed in commerce for personal or commercial use or consumption.
PN 46G3772 Page 92 of 197 EC J85151 13MAY05
EC 899569 04NOV93 EC G32590 08FEB06
EC 899773 07DEC94 EC L04925B 11JAN07
EC F15040 25AUG97 EC L04925M 01AUG07
EC F73298 02SEP99 EC L04925N 19FEB08
EC F74336 05SEP00 EC L05962X 08AUG08
EC F72950 23JAN02 EC L79598 25FEB09
EC H64064 13MAY03 EC N24534E 02OCT09
EC H17205 29JUL03 EC L79598A 22FEB10
EC L79598B 22SEPT10
EC L79598C 27APR2011
EC L79598D 6SEPT2011
EC N31517Y 26MAR2012
ECN31946T 19APR2013
ECN33076 5DEC2013
ECN33076A 16MAY2014
ECN46883 17OCT2014
ECP02692 26MAY2015
ECO P02838 15OCT2015
ECOP17505 21APR2016
ECO P17633 1OCT2016
ECOP17764 20MAR2017
ECOP17905 16OCT2017
ECOP17958 Jan 25, 2018
ECOP44540 June 11, 2018
ECOP44680 Mar 5, 2019
ECOP44794 Aug 9, 2019
ECO P44877 15Feb2020
ECO P45188 1Sept2020
ECO P45272 9Mar2021
ECO P45379 18Oct2021
ECO 45443 4April2022
ECO P45475 14Nov2022
This document is the property of IBM. Its use is authorized only for responding to a request for quotation or for the performance of work for IBM. All questions must be referred to the IBM Procurement Department requesting the quotation or performance of work.
Engineering Specification
Page 93 of 197
As listed in the US Department of Energy EPS Frequently Asked Questions, any external power supply that is of a type capable of operating a consumer product would be considered a covered product, without regard to whether that external power supply was in fact distributed in U.S. commerce to operate a consumer product. Only external power supplies that have identifiable design characteristics that would make them incapable of operating a consumer product would be considered to not meet EPCA's definition of external power supply. For IBM Systems' Products, an EPS offered with a NEMA 5-15P or 5-20P wall plug would be considered a consumer product.
United States - California, Oregon, Rhode Island, New York, Arizona, Washington, Connecticut "State-regulated external power supply" or "single voltage external AC to DC power supply" means a singlevoltage external AC to DC or AC to AC power supply that:
(1) Is designed to convert line voltage AC input into lower voltage DC or AC output; (2) Is able to convert to only one DC or AC output voltage at a time; (3) Is sold with, or intended to be used with, a separate end-use product that constitutes the primary load; (4) Is contained within a separate physical enclosure from the end-use product; (5) Is connected to the end-use product via a removable or hard-wired male/female electrical connection, cable,
cord, or other wiring; (6) Does not have batteries or battery packs that physically attach directly (including those that are removable)
to the power supply unit; (7) does not have a battery chemistry or type selector switch and an indicator light; or, does not have a battery
chemistry or type selector switch and a state of charge meter; (8) Has a nameplate output power less than or equal to 250 watts.
Canada External power supply means a single-voltage external power supply or a multiple-voltage external power supply that is designed to be used with a household or office end-use product that constitutes the primary load. It does not include (a) a direct operation external power supply that has a nominal output voltage of less than 3 V and a nominal output current of 1000 mA or more and that charges the battery of an end use product that is fully or primarily motoroperated; (b) an indirect operation external power supply that has a nominal output power of greater than 250 W; (c) a device that powers the charger of a detachable battery pack of an end-use product; (d) a device that is an accessory to a medical device; or (e) a device that is solely designed to power solid-state lighting or a ceiling fan that has a direct current motor.
Replacement external power supply means an external power supply that is marked as a replacement to be used with a specific end-use product that was manufactured before July 1, 2017.
Direct operation external power supply means a power supply device that is capable of operating an end-use product, other than a battery charger, without the assistance of a battery.
Indirect operation external power supply means a power supply device that can only operate an end-use product with the assistance of a battery.
Multiple-voltage external power supply means a device that is designed to convert line voltage AC input into more than one simultaneous lower voltage AC or DC outputs.
Single-voltage external power supply means a device that is designed to convert line voltage AC input into only one lower AC or DC voltage output at a time.
The following products are not energy-using products if at the time of importation into Canada, they are incorporated into another product. This only applies for reporting at importation, not the energy efficiency requirements.
(a) a battery charger; (b) an external power supply;
PN 46G3772 Page 93 of 197 EC J85151 13MAY05
EC 899569 04NOV93 EC G32590 08FEB06
EC 899773 07DEC94 EC L04925B 11JAN07
EC F15040 25AUG97 EC L04925M 01AUG07
EC F73298 02SEP99 EC L04925N 19FEB08
EC F74336 05SEP00 EC L05962X 08AUG08
EC F72950 23JAN02 EC L79598 25FEB09
EC H64064 13MAY03 EC N24534E 02OCT09
EC H17205 29JUL03 EC L79598A 22FEB10
EC L79598B 22SEPT10
EC L79598C 27APR2011
EC L79598D 6SEPT2011
EC N31517Y 26MAR2012
ECN31946T 19APR2013
ECN33076 5DEC2013
ECN33076A 16MAY2014
ECN46883 17OCT2014
ECP02692 26MAY2015
ECO P02838 15OCT2015
ECOP17505 21APR2016
ECO P17633 1OCT2016
ECOP17764 20MAR2017
ECOP17905 16OCT2017
ECOP17958 Jan 25, 2018
ECOP44540 June 11, 2018
ECOP44680 Mar 5, 2019
ECOP44794 Aug 9, 2019
ECO P44877 15Feb2020
ECO P45188 1Sept2020
ECO P45272 9Mar2021
ECO P45379 18Oct2021
ECO 45443 4April2022
ECO P45475 14Nov2022
This document is the property of IBM. Its use is authorized only for responding to a request for quotation or for the performance of work for IBM. All questions must be referred to the IBM Procurement Department requesting the quotation or performance of work.
Engineering Specification
Page 94 of 197
(c) a fluorescent lamp ballast; (d) an electric motor; and (e) a small electric motor.
This scope is limited to EPSs designed for household and office end use. External power supplies used only internal to a rack system and designed for an end-use product that is not intended for use in a home would fall out of the scope of the Canada Regulation. If the EPS is available for household or office use, irrespective of how IBM markets it, then it is in scope.
Korea Adapter - A single voltage external power supply (AC-DC or AC-AC) under 150 W (nameplate output power) without any charging function. Charger - Single voltage external power supply (AC-DC) with charging function to charge a lithium ion battery and has an input of 20W.
EU, Turkey, and other jurisdictions transposing EU regulations. External power supply means a device which meets all of the following criteria: (a) it is designed to convert alternating current (AC) power input from the mains power source input into one or more lower voltage direct current (DC) or AC outputs; (b) it is used with one or more separate devices that constitute the primary load; (c) it is contained in a physical enclosure separate from the device or devices that constitute the primary load; (d) it is connected to the device or devices that constitute the primary load with removable or hard-wired male/ female electrical connections, cables, cords or other wirings; (e) it has nameplate output power not exceeding 250 watts; and (f) it is used with electrical and electronic household and office equipment included in Annex I; such as Information technology equipment, including copying and printing equipment, and set-top boxes, intended primarily for use in the domestic environment. See EU regulation for more definitions, details and product scope information.
Domestic environment means an environment where the use of broadcast radio and television receivers may be expected within a distance of 10 m of the equipment concerned.
Information technology equipment means any equipment which has a primary function of either entry, storage, display, retrieval, transmission, processing, switching, or control, of data or of telecommunication messages or a combination of these functions and may be equipped with one or more terminal ports typically operated for information transfer.
Mains means the electricity supply from the grid of 230 (± 10 %) volts of alternating current at 50 Hz.
For the countries listed above, external power supplies used only internal to a rack system are out of scope.
Mexico
External Power Supply - Apparatus capable of supplying and controlling intensity of electrical current, electrical
voltage, or electrical power, within its design limits; that meets the following conditions:
a. - It has been designed to convert the AC voltage of the supply line to a lower level and direct current;
b. - It is capable of converting a single electrical voltage into a direct current at the same time;
c. - It is a product provided separately or as a part of a set, intended for use with an independent end-use product (for
example: laptop, cell phone, alarm system, among others), which constitutes its primary load.
d. - housed in a physically separate enclosure of the end-use product;
e. - it is connected to the end-use product by means of an electrical connection through a cable, power cord, or other
similar type of wiring and usually using a mechanical male/female type coupling system.
f. - able to supply an output power less than or equal to 250.0 W.
The EPSs are also normally known as "AC / DC adapters." or "battery eliminators," among the commonly used
names. NOTE: The "physically separated" concept refers to the enclosing boxes or cabinets of the products
themselves, and not to the way in which they are packaged for sale or distribution.
PN 46G3772 Page 94 of 197 EC J85151 13MAY05
EC 899569 04NOV93 EC G32590 08FEB06
EC 899773 07DEC94 EC L04925B 11JAN07
EC F15040 25AUG97 EC L04925M 01AUG07
EC F73298 02SEP99 EC L04925N 19FEB08
EC F74336 05SEP00 EC L05962X 08AUG08
EC F72950 23JAN02 EC L79598 25FEB09
EC H64064 13MAY03 EC N24534E 02OCT09
EC H17205 29JUL03 EC L79598A 22FEB10
EC L79598B 22SEPT10
EC L79598C 27APR2011
EC L79598D 6SEPT2011
EC N31517Y 26MAR2012
ECN31946T 19APR2013
ECN33076 5DEC2013
ECN33076A 16MAY2014
ECN46883 17OCT2014
ECP02692 26MAY2015
ECO P02838 15OCT2015
ECOP17505 21APR2016
ECO P17633 1OCT2016
ECOP17764 20MAR2017
ECOP17905 16OCT2017
ECOP17958 Jan 25, 2018
ECOP44540 June 11, 2018
ECOP44680 Mar 5, 2019
ECOP44794 Aug 9, 2019
ECO P44877 15Feb2020
ECO P45188 1Sept2020
ECO P45272 9Mar2021
ECO P45379 18Oct2021
ECO 45443 4April2022
ECO P45475 14Nov2022
This document is the property of IBM. Its use is authorized only for responding to a request for quotation or for the performance of work for IBM. All questions must be referred to the IBM Procurement Department requesting the quotation or performance of work.
Engineering Specification
Page 95 of 197
See the standard for more definitions.
Requirements by Jurisdiction Jurisdiction Marking
Australia and New Zealand
Manufacturer name
Model Number
Date of Manufacture
United States, Federal regulations
International Efficiency Marking Protocol, IV or higher, on product and packaging Manufacturer name
Model number
Date of manufacture
United States, state regulations
International Efficiency Marking Protocol on product, packaging or accompanying documentation Manufacturer name
Model number
Date of Manufacture
Canada
International Efficiency Marking Protocol (see Marking section) on product, packaging or accompanying documentation5. Model number Date of Manufacture
Mark of a Standards
Efficiency1 Requirements Tier 2
Tier 2 Beginning February 10, 2016 for Direct Operation External Power Supply: See efficiency section.
Tier 2 Beginning Feb 10, 2016 for Direct Operation External Power Supply: See efficiency section.
See Efficiency Requirements section. EPS must be registered with Natural Resources Canada at http://oee.nrcan.gc.ca/pmllmp/index.cfm?action=app.searchrecherche&appliance=EPS
Test Method2 AS/NZS 4665.2 and 4665.1 Performance of external power supplies MEPs requirements and Test method and energy performance mark 10 Code of Federal Register Part 430 Subpart B Appendix Z
For State regulated EPSs - US EPA
See table under efficiency requirements
Certification Registration with government
Certified by manufacturer to US Department of Energy with test results and compliance statement
Requirements vary by state, but typically include registration with the energy efficiency test report to verify International Efficiency Mark.
Certification by accredited certification body3
Information required by IBM A/NZ Test Report Copy of registration with government at https://reg.energyrating.gov.au /comparator/product types/
US Test Report Copy of certification
Energy Efficiency Test Report
Certification statement from accredited certification body Test results
PN 46G3772 Page 95 of 197 EC J85151 13MAY05
EC 899569 04NOV93 EC G32590 08FEB06
EC 899773 07DEC94 EC L04925B 11JAN07
EC F15040 25AUG97 EC L04925M 01AUG07
EC F73298 02SEP99 EC L04925N 19FEB08
EC F74336 05SEP00 EC L05962X 08AUG08
EC F72950 23JAN02 EC L79598 25FEB09
EC H64064 13MAY03 EC N24534E 02OCT09
EC H17205 29JUL03 EC L79598A 22FEB10
EC L79598B 22SEPT10
EC L79598C 27APR2011
EC L79598D 6SEPT2011
EC N31517Y 26MAR2012
ECN31946T 19APR2013
ECN33076 5DEC2013
ECN33076A 16MAY2014
ECN46883 17OCT2014
ECP02692 26MAY2015
ECO P02838 15OCT2015
ECOP17505 21APR2016
ECO P17633 1OCT2016
ECOP17764 20MAR2017
ECOP17905 16OCT2017
ECOP17958 Jan 25, 2018
ECOP44540 June 11, 2018
ECOP44680 Mar 5, 2019
ECOP44794 Aug 9, 2019
ECO P44877 15Feb2020
ECO P45188 1Sept2020
ECO P45272 9Mar2021
ECO P45379 18Oct2021
ECO 45443 4April2022
ECO P45475 14Nov2022
This document is the property of IBM. Its use is authorized only for responding to a request for quotation or for the performance of work for IBM. All questions must be referred to the IBM Procurement Department requesting the quotation or performance of work.
Engineering Specification
Korea
Council of Canada (SCC) accredited certification body or International Efficiency Marking Protocol VI or higher Unique to Korea; see Marking section below
See Efficiency Requirements section
Page 96 of 197
Unique to Korea; see Test Method section
Certification by accredited certification body4
Test report issued by one of the designated independent testing laboratories listed for Adapter/ Charger in Annex 4 of the regulation
Mexico
Unique to
See Efficiency Requirements
Not
Not
Test report showing
Mexico, see Marking section below.
section
specified
applicable
compliance to the energy requirements of this standard.
EU, Jordan and Turkey
CE mark, at least 5 mm high on the product, see Figure 10
See Efficiency Requirements section
EN 50563:2011 /A1: 2013
Selfcertification
Technical documentation (dated and signed EPS test report)
Declaration of Conformity
Brand name
See Required Documentation
Single Point of
section below for more
Contact address
information
United Kingdom
UKCA mark, at least 5 mm high on the product,
See Efficiency Requirements section
EN 50563:2011 /A1: 2013
Selfcertification
Technical documentation (dated and signed EPS test report)
see Figure 11
Declaration of Conformity
Brand name
See Required Documentation
Single Point of
section below for more
Contact address
information
1 See Efficiency Requirements section for more information.
2 See Test Method section for more information.
3 The manufacturer or the dealer of the External Power Supply must submit to Natural Resources Canada an energy efficiency report, which must
include: product name, manufacturer name, brand name, model number, nominal output, in volts, at highest and lowest output setting, nominal
output, in watts, at highest and lowest output setting, if applicable, whether the output is AC or DC, the average efficiency at highest and lowest
output setting, no load power in watts, whether it is a replacement external power supply or a security EPS, if a replacement EPS or a security
EPS, the end-use equipment and the brand and model number of that equipment, roman numeral mark, if applicable, whether the product bears a
verification mark, name of the certification body associated with verifying the Roman numeral mark or that authorized the verification mark that
appears on the product. 4e.g., Korea Testing Laboratory, EMC Research Institute, Telecommunications Technology Association or Korea Electric Testing Institute. 5 Some states may require the mark to be on the product, with no allowance for the mark to be on the packaging. IBM recommends the mark be
placed on the EPS product.
Efficiency Requirements
Tier 2 Efficiency requirements see above table under Requirements by Jurisdiction
External Power Supply Requirements
Active Mode
Nameplate Output
Required Efficiency (decimal equivalent of a percentage)
Less than 1 watt
0.5 times the Nameplate Output
From 1 watt to not more than 51 watts
The sum of 0.09 times the Natural Logarithm of the
Nameplate Output and 0.5
PN 46G3772 Page 96 of 197 EC J85151 13MAY05
EC 899569 04NOV93 EC G32590 08FEB06
EC 899773 07DEC94 EC L04925B 11JAN07
EC F15040 25AUG97 EC L04925M 01AUG07
EC F73298 02SEP99 EC L04925N 19FEB08
EC F74336 05SEP00 EC L05962X 08AUG08
EC F72950 23JAN02 EC L79598 25FEB09
EC H64064 13MAY03 EC N24534E 02OCT09
EC H17205 29JUL03 EC L79598A 22FEB10
EC L79598B 22SEPT10
EC L79598C 27APR2011
EC L79598D 6SEPT2011
EC N31517Y 26MAR2012
ECN31946T 19APR2013
ECN33076 5DEC2013
ECN33076A 16MAY2014
ECN46883 17OCT2014
ECP02692 26MAY2015
ECO P02838 15OCT2015
ECOP17505 21APR2016
ECO P17633 1OCT2016
ECOP17764 20MAR2017
ECOP17905 16OCT2017
ECOP17958 Jan 25, 2018
ECOP44540 June 11, 2018
ECOP44680 Mar 5, 2019
ECOP44794 Aug 9, 2019
ECO P44877 15Feb2020
ECO P45188 1Sept2020
ECO P45272 9Mar2021
ECO P45379 18Oct2021
ECO 45443 4April2022
ECO P45475 14Nov2022
This document is the property of IBM. Its use is authorized only for responding to a request for quotation or for the performance of work for IBM. All questions must be referred to the IBM Procurement Department requesting the quotation or performance of work.
Engineering Specification
Page 97 of 197
Greater than 51 watts
Nameplate Output Not more than 250 watts
No-Load Mode
0.85
Maximum Consumption 0.5 watts
Korea
Adapters (external power supply without charging)
Minimum Energy Performance Standards for Adapters
Minimum Energy Performance Standards (MEPS)
Output power on name
Running Efficiency
Output power on name
plate (Pno)
(On mode energy
plate (Pno)
efficiency)
0<Pno<1W
>0.49 x Pno
1W<P no<49W
>[0.09 x Ln (Pno)] + 0.49
0<Pno<10W
Maximum Standby Power (Power consumption on No-Load Mode)
<0.5W
49W<Pno<150W
>0.84
10W<Pno<150W
<0.75W
Chargers (external power supply with charging function to charge Li Ion Battery)
Minimum Energy Performance Standards for Chargers
Minimum Energy Performance Standards (MEPS)
Measured Input Power(Pin)
Maximum Standby Power
Power consumption on No-Load Mode
0<Pin<10W
<0.5W
10W<Pin<20W
<0.75W
Canada
Information, as listed in the Canada Energy Regulation must be submitted to the respective Canadian minister (a) information that indicates whether the product is a single-voltage external power supply or a multiple-voltage external power supply; (b) for each voltage output, its nominal output voltage at the highest and lowest settings and information that indicates whether that voltage is AC or DC; (c) its nominal output power, expressed in watts, at the highest and lowest power settings, if applicable; (d) its average efficiency at the highest and lowest power settings, if applicable; (e) its power in no-load mode, expressed in watts; (f) the Roman numeral mark, if applicable; (g) information that indicates whether the product bears a verification mark; and
PN 46G3772 Page 97 of 197 EC J85151 13MAY05
EC 899569 04NOV93 EC G32590 08FEB06
EC 899773 07DEC94 EC L04925B 11JAN07
EC F15040 25AUG97 EC L04925M 01AUG07
EC F73298 02SEP99 EC L04925N 19FEB08
EC F74336 05SEP00 EC L05962X 08AUG08
EC F72950 23JAN02 EC L79598 25FEB09
EC H64064 13MAY03 EC N24534E 02OCT09
EC H17205 29JUL03 EC L79598A 22FEB10
EC L79598B 22SEPT10
EC L79598C 27APR2011
EC L79598D 6SEPT2011
EC N31517Y 26MAR2012
ECN31946T 19APR2013
ECN33076 5DEC2013
ECN33076A 16MAY2014
ECN46883 17OCT2014
ECP02692 26MAY2015
ECO P02838 15OCT2015
ECOP17505 21APR2016
ECO P17633 1OCT2016
ECOP17764 20MAR2017
ECOP17905 16OCT2017
ECOP17958 Jan 25, 2018
ECOP44540 June 11, 2018
ECOP44680 Mar 5, 2019
ECOP44794 Aug 9, 2019
ECO P44877 15Feb2020
ECO P45188 1Sept2020
ECO P45272 9Mar2021
ECO P45379 18Oct2021
ECO 45443 4April2022
ECO P45475 14Nov2022
This document is the property of IBM. Its use is authorized only for responding to a request for quotation or for the performance of work for IBM. All questions must be referred to the IBM Procurement Department requesting the quotation or performance of work.
Engineering Specification
Page 98 of 197
(h) information that indicates whether the product is a replacement external power supply or a security external power supply and, if it is one of those power supplies, the end-use product or equipment, as applicable, and the model number and brand of that end-use product or equipment.
European Union, United Kingdom and other jurisdictions implementing EU regulations
Requirements effective until April 1, 2020: Newly releasing external power supplies (and previously released EPSs by April 6, 2011) must meet the following requirements: 1.The no-load condition power consumption shall not exceed the following limits:
AC-AC EPSs, except low
AC-DC EPSs except low
voltage EPSs
voltage EPSs
PO < 51.0 W
0.50 W
0.30 W
PO > 51.0 W
0.50 W
0.50 W
2.The average active efficiency shall be not less than the following limits:
Low voltage EPSs
0.30 W Not applicable
PO < 1.0 W 1.0 W < PO < 51.0 W PO > 51.0 W
AC-AC and AC-DC EPSs, except low voltage EPSs 0.480 . PO+ 0.140
0.063 . 1n(PO) + 0.622
0.870
Low voltage EPSs 0.497 . PO+ 0.067 0.075. 1n(PO) + 0.561
0.860
Requirements effective after April 1, 2020:
United States Federal and California Beginning February 10, 2016: for Direct Operation External Power Supply Efficiency Standards
Single-voltage External AC-DC Power Supply, Basic Voltage
Nameplate Output Power (Pout)
Minimum Average Efficiency in Active Mode
Maximum Power in No-Load Mode [W
PN 46G3772 Page 98 of 197 EC J85151 13MAY05
EC 899569 04NOV93 EC G32590 08FEB06
EC 899773 07DEC94 EC L04925B 11JAN07
EC F15040 25AUG97 EC L04925M 01AUG07
EC F73298 02SEP99 EC L04925N 19FEB08
EC F74336 05SEP00 EC L05962X 08AUG08
EC F72950 23JAN02 EC L79598 25FEB09
EC H64064 13MAY03 EC N24534E 02OCT09
EC H17205 29JUL03 EC L79598A 22FEB10
EC L79598B 22SEPT10
EC L79598C 27APR2011
EC L79598D 6SEPT2011
EC N31517Y 26MAR2012
ECN31946T 19APR2013
ECN33076 5DEC2013
ECN33076A 16MAY2014
ECN46883 17OCT2014
ECP02692 26MAY2015
ECO P02838 15OCT2015
ECOP17505 21APR2016
ECO P17633 1OCT2016
ECOP17764 20MAR2017
ECOP17905 16OCT2017
ECOP17958 Jan 25, 2018
ECOP44540 June 11, 2018
ECOP44680 Mar 5, 2019
ECOP44794 Aug 9, 2019
ECO P44877 15Feb2020
ECO P45188 1Sept2020
ECO P45272 9Mar2021
ECO P45379 18Oct2021
ECO 45443 4April2022
ECO P45475 14Nov2022
This document is the property of IBM. Its use is authorized only for responding to a request for quotation or for the performance of work for IBM. All questions must be referred to the IBM Procurement Department requesting the quotation or performance of work.
Engineering Specification
Page 99 of 197
Pout < 1 W 1 W < Pout < 49 W 49 W < Pout < 250 W
Pout > 250 W
Nameplate Output Power (Pout)
Pout < 1 W 1 W < Pout < 49 W 49 W < Pout < 250 W
Pout > 250 W
Nameplate Output Power (Pout)
Pout < 1 W 1 W < Pout < 49 W 49 W < Pout < 250 W
Pout > 250 W
Nameplate Output Power (Pout)
Pout < 1 W 1 W < Pout < 49 W 49 W < Pout < 250 W
Pout > 250 W
Nameplate Output Power (Pout)
Pout < 1 W 1 W < Pout < 49 W
Pout > 49 W
(expressed as a decimal)
> 0.5 × Pout + 0.16
< 0.100
> 0.071 × ln(Pout) - 0.0014 × Pout + 0.67
< 0.100
> 0.880
< 0.210
> 0.875
< 0.500
Single-Voltage External AC-DC Power Supply, Low-Voltage
Minimum Average Efficiency in Active Mode (expressed as a decimal)
Maximum Power in No-Load Mode [W]
> 0.517 × Pout + 0.087
< 0.100
> 0.0834 × ln(Pout) - 0.0014 × Pout + 0.609
< 0.100
> 0.870
< 0.210
> 0.875
< 0.500
Single-Voltage External AC-AC Power Supply, Basic-Voltage
Minimum Average Efficiency in Active Mode (expressed as a decimal)
Maximum Power in No-Load Mode [W
> 0.5 × Pout + 0.16
< 0.100
> 0.071 × ln(Pout) - 0.0014 × Pout + 0.67
< 0.100
> 0.880
< 0.210
> 0.875
< 0.500
Single-Voltage External AC-AC Power Supply, Low-Voltage
Minimum Average Efficiency in Active Mode (expressed as a decimal)
Maximum Power in No-Load Mode [W
> 0.517 × Pout + 0.087
< 0.100
> 0.0834 × ln(Pout) - 0.0014 × Pout + 0.609
< 0.100
> 0.870
< 0.210
> 0.875
< 0.500
Multiple-Voltage External Power Supply
Minimum Average Efficiency in Active Mode (expressed as a decimal)
Maximum Power in No-Load Mode [W
> 0.497 × Pout + 0.067
< 0.300
> 0.075 × ln(Pout) + 0.561
< 0.300
> 0.860
< 0.300
Mexico External Power Supplies that fall under the field of application of the Mexico NOM 029-ENER-2017 standard must comply with the energy efficiency values for the active power mode and not surpass the power values in no-load mode, as indicated in the table below.
PN 46G3772 Page 99 of 197 EC J85151 13MAY05
EC 899569 04NOV93 EC G32590 08FEB06
EC 899773 07DEC94 EC L04925B 11JAN07
EC F15040 25AUG97 EC L04925M 01AUG07
EC F73298 02SEP99 EC L04925N 19FEB08
EC F74336 05SEP00 EC L05962X 08AUG08
EC F72950 23JAN02 EC L79598 25FEB09
EC H64064 13MAY03 EC N24534E 02OCT09
EC H17205 29JUL03 EC L79598A 22FEB10
EC L79598B 22SEPT10
EC L79598C 27APR2011
EC L79598D 6SEPT2011
EC N31517Y 26MAR2012
ECN31946T 19APR2013
ECN33076 5DEC2013
ECN33076A 16MAY2014
ECN46883 17OCT2014
ECP02692 26MAY2015
ECO P02838 15OCT2015
ECOP17505 21APR2016
ECO P17633 1OCT2016
ECOP17764 20MAR2017
ECOP17905 16OCT2017
ECOP17958 Jan 25, 2018
ECOP44540 June 11, 2018
ECOP44680 Mar 5, 2019
ECOP44794 Aug 9, 2019
ECO P44877 15Feb2020
ECO P45188 1Sept2020
ECO P45272 9Mar2021
ECO P45379 18Oct2021
ECO 45443 4April2022
ECO P45475 14Nov2022
This document is the property of IBM. Its use is authorized only for responding to a request for quotation or for the performance of work for IBM. All questions must be referred to the IBM Procurement Department requesting the quotation or performance of work.
Engineering Specification
Page 100 of 197
See standard for more details of the requirements and testing methodology. A test report must be submitted to IBM showing compliance to the energy requirements of this standard.
Marking
United States Federal and California
Through February 9, 2016: Class A EPSs must have IV mark or higher, see International Efficiency Marking
Protocol below.
Beginning February 10, 2016: US Federal EPS Marking Requirements by Product Class are:
Class ID
Product Class
Marking Requirement
B
Direct Operation, AC-DC, Basic-Voltage
Roman numeral VI
C
Direct Operation, AC-DC, Low-Voltage
Roman numeral VI
D
Direct Operation, AC-AC, Basic-Voltage
Roman numeral VI
E
Direct Operation, AC-AC, Low-Voltage
Roman numeral VI
X
Direct Operation, Multiple-Voltage
Roman numeral VI
H
Direct Operation, High-Power
Roman numeral VI
N
Indirect Operation
Class A: Roman numeral IV or higher.
Non-Class A: No marking requirement.
International Efficiency Marking Protocol The marking is determined by comparing the unit's active and no load test data with the performance requirements of the International Efficiency Marking Protocol scale. The marking shall be permanently shown on the nameplate of the power supply. The font should be a plain serif font such as Times Roman. The size must be legible and indelible in a color that contrasts with the nameplate background. The label must include the manufacturer's name, model number, and Date of Manufacture. See International Efficiency Marking Protocol for further information: http://www.regulations.gov/#!documentDetail;D=EERE-2008-BT-STD-0005-0218.
PN 46G3772 Page 100 of 197 EC J85151 13MAY05
EC 899569 04NOV93 EC G32590 08FEB06
EC 899773 07DEC94 EC L04925B 11JAN07
EC F15040 25AUG97 EC L04925M 01AUG07
EC F73298 02SEP99 EC L04925N 19FEB08
EC F74336 05SEP00 EC L05962X 08AUG08
EC F72950 23JAN02 EC L79598 25FEB09
EC H64064 13MAY03 EC N24534E 02OCT09
EC H17205 29JUL03 EC L79598A 22FEB10
EC L79598B 22SEPT10
EC L79598C 27APR2011
EC L79598D 6SEPT2011
EC N31517Y 26MAR2012
ECN31946T 19APR2013
ECN33076 5DEC2013
ECN33076A 16MAY2014
ECN46883 17OCT2014
ECP02692 26MAY2015
ECO P02838 15OCT2015
ECOP17505 21APR2016
ECO P17633 1OCT2016
ECOP17764 20MAR2017
ECOP17905 16OCT2017
ECOP17958 Jan 25, 2018
ECOP44540 June 11, 2018
ECOP44680 Mar 5, 2019
ECOP44794 Aug 9, 2019
ECO P44877 15Feb2020
ECO P45188 1Sept2020
ECO P45272 9Mar2021
ECO P45379 18Oct2021
ECO 45443 4April2022
ECO P45475 14Nov2022
This document is the property of IBM. Its use is authorized only for responding to a request for quotation or for the performance of work for IBM. All questions must be referred to the IBM Procurement Department requesting the quotation or performance of work.
Engineering Specification
Page 101 of 197
Korea Adapters and Chargers must be tested and labeled in accordance with the Korean Regulation on Energy Efficiency Labeling and Standards, July 31, 2008. The required label is in the Figure below. The label shall be on the front or top of the product. Please note that "ABC-12345" represents the model number of the external power supply. If the model number is already shown on the unit, then the line text with the model number can be eliminated on this label. The KC mark does not need to be right next to the Korean text but does need to be on the front or top of the unit.
Korea Energy Label for Adapters and Chargers
Mexico All external power supplies in scope of the Mexican Official Standard must be marked on the body of the product or with a legible and indelible data plate with the data listed below. It must be adhered or mechanically attached to the enclosure or housing on the main body of the external power supply in a visible place. The minimum information that the marking of the external power supply must have is: · Name of the manufacturer or distributor, or a logo or registered trademark; · Model or commercial identification designated by the manufacturer or distributor and used for commercial identification; · Electrical data, nominal input voltage, and frequency. · Marking of energy efficiency level V or VI, in roman numbers; (as appropriate); · Nominal electrical data of the electrical output voltage, electrical power and/or the electric current output intensity.
The mark must be indelible and legible after manual rubbing of the mark for fifteen seconds with a rag soaked in water. The data plate must be made of a material that permanently guarantees the legibility of the information, and that does not become degraded over time under normal environmental conditions.
External power supplies in scope of this Mexican Official Standard that are directly sold to the public, individually, that is, not as a piece or accessory of a product for end-use, must bear the information as listed below. This label is additional to the marking that must be done as listed above. The information can be imprinted or affixed, or placed on the product, or packaging or instructions or user manuals, or in the regulatory information included with the product. The energy efficiency information must contain the following, as a minimum, in a legible and indelible manner. (Please see Exemption entry in this Section for additional exempted EPS information.) Label information: ENERGY EFFICIENCY, in capital letters. Complies with NOM-029-ENER-2017 Level of energy efficiency V or VI, in Roman numbers. Below is an example of a label in accordance with this standard. The label must be written in Spanish.
English translation provided below for reference only.
Canada A verification mark must be readily visible on the surface of the external power supply or on the exterior of the product's packaging. The verification mark must be issued by a certification body accredited by the Standards Council of Canada.
PN 46G3772 Page 101 of 197 EC J85151 13MAY05
EC 899569 04NOV93 EC G32590 08FEB06
EC 899773 07DEC94 EC L04925B 11JAN07
EC F15040 25AUG97 EC L04925M 01AUG07
EC F73298 02SEP99 EC L04925N 19FEB08
EC F74336 05SEP00 EC L05962X 08AUG08
EC F72950 23JAN02 EC L79598 25FEB09
EC H64064 13MAY03 EC N24534E 02OCT09
EC H17205 29JUL03 EC L79598A 22FEB10
EC L79598B 22SEPT10
EC L79598C 27APR2011
EC L79598D 6SEPT2011
EC N31517Y 26MAR2012
ECN31946T 19APR2013
ECN33076 5DEC2013
ECN33076A 16MAY2014
ECN46883 17OCT2014
ECP02692 26MAY2015
ECO P02838 15OCT2015
ECOP17505 21APR2016
ECO P17633 1OCT2016
ECOP17764 20MAR2017
ECOP17905 16OCT2017
ECOP17958 Jan 25, 2018
ECOP44540 June 11, 2018
ECOP44680 Mar 5, 2019
ECOP44794 Aug 9, 2019
ECO P44877 15Feb2020
ECO P45188 1Sept2020
ECO P45272 9Mar2021
ECO P45379 18Oct2021
ECO 45443 4April2022
ECO P45475 14Nov2022
This document is the property of IBM. Its use is authorized only for responding to a request for quotation or for the performance of work for IBM. All questions must be referred to the IBM Procurement Department requesting the quotation or performance of work.
Engineering Specification European Union
Page 102 of 197
Test Methods
10 Code of Federal Register Part 430 Subpart B Appendix Z - Uniform Test Method for Measuring the Energy Consumption of External Power Supplies. Canadian Standards Association (CSA) C381.1-17 Energy performance of external ac-dc and ac-ac power supplies. US EPA "Test Method for Calculating the Energy Efficiency of Single-Voltage External AC-DC and AC-AC Power Supplies" dated August 11, 2004, except that the test voltage specified in Section 4(d) of the test method shall be only 115 volts, 60 Hz. Korea Regulation on Energy Efficiency Labeling and Standards, Annex I, section 13. EU Regulation EC No 278/2009, Annex I AS/NZS 4665.2:2005: Performance of external power supplies-- Minimum energy performance standard (MEPS) requirements. AS/NZS 4665.1:2005: Performance of external power supplies--Test method and energy performance mark.
Additional required documentation EU and other jurisdictions which have transposed the EU regulation. Requirements up to April 1, 2020. The following documents must be provided to IBM in English as well as other available languages: 1. Declaration of Conformity (DoC) to EU Regulations 1275/2008 and 278/2009 as required by EU Directive
2009/125/EC and Declaration of Conformity as required by JSNO 2111/2013 Technical Regulation on eco-design requirements for no-load condition electric power consumption and average active efficiency of external power supplies. The DoC must include:
(1)Name and address of the manufacturer or of its authorized representative; (2)A description of the model sufficient for unambiguous identification; (3)Where appropriate, the references of the harmonized standards applied; (4)Where appropriate, the other technical standards and specifications used; (5)Where appropriate, the reference to other EU Community legislation providing for the affixing of the CE
mark that is applied; and (6)Identification and signature of the person empowered to bind the manufacturer or its authorized
representative. 2. The technical documentation (including a dated and signed test report) showing efficiency data must be provided.
The technical documentation must meet the requirements of Annexes I and II of EU Commission Regulation No 278/2009 and Switzerland Energy Regulation Appendix 2:11. This documentation must include a general description of the product and its intended use. In addition, the following is an example of the format of the technical documentation specifically for EPSs, from EU Commission Regulation No 278/2009:
PN 46G3772 Page 102 of 197 EC J85151 13MAY05
EC 899569 04NOV93 EC G32590 08FEB06
EC 899773 07DEC94 EC L04925B 11JAN07
EC F15040 25AUG97 EC L04925M 01AUG07
EC F73298 02SEP99 EC L04925N 19FEB08
EC F74336 05SEP00 EC L05962X 08AUG08
EC F72950 23JAN02 EC L79598 25FEB09
EC H64064 13MAY03 EC N24534E 02OCT09
EC H17205 29JUL03 EC L79598A 22FEB10
EC L79598B 22SEPT10
EC L79598C 27APR2011
EC L79598D 6SEPT2011
EC N31517Y 26MAR2012
ECN31946T 19APR2013
ECN33076 5DEC2013
ECN33076A 16MAY2014
ECN46883 17OCT2014
ECP02692 26MAY2015
ECO P02838 15OCT2015
ECOP17505 21APR2016
ECO P17633 1OCT2016
ECOP17764 20MAR2017
ECOP17905 16OCT2017
ECOP17958 Jan 25, 2018
ECOP44540 June 11, 2018
ECOP44680 Mar 5, 2019
ECOP44794 Aug 9, 2019
ECO P44877 15Feb2020
ECO P45188 1Sept2020
ECO P45272 9Mar2021
ECO P45379 18Oct2021
ECO 45443 4April2022
ECO P45475 14Nov2022
This document is the property of IBM. Its use is authorized only for responding to a request for quotation or for the performance of work for IBM. All questions must be referred to the IBM Procurement Department requesting the quotation or performance of work.
Engineering Specification
Page 103 of 197
Reported Quantity
Description
Root mean square (Rms) output current (mA) Measured at load conditions 1-4
Rms output voltage (V)
Active output power (W)
Rms input voltage (V)
Measured at load conditions 1-5
Rms input power (W)
Total harmonic distortion (THD)
True power factor
Power consumed (W)
Calculated at load condition 1-4, measured at load condition 5
Efficiency
Calculated at load conditions 1-4
Average efficiency
Arithmetic average of efficiency at load conditions 1-4
Percentage of nameplate output current
Load condition 1
100 % ± 2 %
Load condition 2
75 % ± 2 %
Load condition 3
50 % ± 2 %
Load condition 4
25 % ± 2 %
Load condition 5
0 % (no-load condition)
Requirements effective on and after April 1, 2020 The following documents must be provided to IBM in English as well as other available languages: 1. Declaration of Conformity (DoC) The DoC must follow the format of Annex VI of EU Directive 2009/125/EC of the European Parliament and of the Council of 21 October 2009 establishing a framework for the setting of ecodesign requirements for energy-related products. The format is:
UK Declaration of Conformity must follow the format of Schedule 1 of Ecodesign for Energy-Related Products Regulations 2010. The format is:
PN 46G3772 Page 103 of 197 EC J85151 13MAY05
EC 899569 04NOV93 EC G32590 08FEB06
EC 899773 07DEC94 EC L04925B 11JAN07
EC F15040 25AUG97 EC L04925M 01AUG07
EC F73298 02SEP99 EC L04925N 19FEB08
EC F74336 05SEP00 EC L05962X 08AUG08
EC F72950 23JAN02 EC L79598 25FEB09
EC H64064 13MAY03 EC N24534E 02OCT09
EC H17205 29JUL03 EC L79598A 22FEB10
EC L79598B 22SEPT10
EC L79598C 27APR2011
EC L79598D 6SEPT2011
EC N31517Y 26MAR2012
ECN31946T 19APR2013
ECN33076 5DEC2013
ECN33076A 16MAY2014
ECN46883 17OCT2014
ECP02692 26MAY2015
ECO P02838 15OCT2015
ECOP17505 21APR2016
ECO P17633 1OCT2016
ECOP17764 20MAR2017
ECOP17905 16OCT2017
ECOP17958 Jan 25, 2018
ECOP44540 June 11, 2018
ECOP44680 Mar 5, 2019
ECOP44794 Aug 9, 2019
ECO P44877 15Feb2020
ECO P45188 1Sept2020
ECO P45272 9Mar2021
ECO P45379 18Oct2021
ECO 45443 4April2022
ECO P45475 14Nov2022
This document is the property of IBM. Its use is authorized only for responding to a request for quotation or for the performance of work for IBM. All questions must be referred to the IBM Procurement Department requesting the quotation or performance of work.
Engineering Specification
Page 104 of 197
2. Technical Documentation. The Technical Documentation shall have the following elements:
PN 46G3772 Page 104 of 197 EC J85151 13MAY05
EC 899569 04NOV93 EC G32590 08FEB06
EC 899773 07DEC94 EC L04925B 11JAN07
EC F15040 25AUG97 EC L04925M 01AUG07
EC F73298 02SEP99 EC L04925N 19FEB08
EC F74336 05SEP00 EC L05962X 08AUG08
EC F72950 23JAN02 EC L79598 25FEB09
EC H64064 13MAY03 EC N24534E 02OCT09
EC H17205 29JUL03 EC L79598A 22FEB10
EC L79598B 22SEPT10
EC L79598C 27APR2011
EC L79598D 6SEPT2011
EC N31517Y 26MAR2012
ECN31946T 19APR2013
ECN33076 5DEC2013
ECN33076A 16MAY2014
ECN46883 17OCT2014
ECP02692 26MAY2015
ECO P02838 15OCT2015
ECOP17505 21APR2016
ECO P17633 1OCT2016
ECOP17764 20MAR2017
ECOP17905 16OCT2017
ECOP17958 Jan 25, 2018
ECOP44540 June 11, 2018
ECOP44680 Mar 5, 2019
ECOP44794 Aug 9, 2019
ECO P44877 15Feb2020
ECO P45188 1Sept2020
ECO P45272 9Mar2021
ECO P45379 18Oct2021
ECO 45443 4April2022
ECO P45475 14Nov2022
This document is the property of IBM. Its use is authorized only for responding to a request for quotation or for the performance of work for IBM. All questions must be referred to the IBM Procurement Department requesting the quotation or performance of work.
Engineering Specification
Page 105 of 197
PN 46G3772 Page 105 of 197 EC J85151 13MAY05
EC 899569 04NOV93 EC G32590 08FEB06
EC 899773 07DEC94 EC L04925B 11JAN07
EC F15040 25AUG97 EC L04925M 01AUG07
EC F73298 02SEP99 EC L04925N 19FEB08
EC F74336 05SEP00 EC L05962X 08AUG08
EC F72950 23JAN02 EC L79598 25FEB09
EC H64064 13MAY03 EC N24534E 02OCT09
EC H17205 29JUL03 EC L79598A 22FEB10
EC L79598B 22SEPT10
EC L79598C 27APR2011
EC L79598D 6SEPT2011
EC N31517Y 26MAR2012
ECN31946T 19APR2013
ECN33076 5DEC2013
ECN33076A 16MAY2014
ECN46883 17OCT2014
ECP02692 26MAY2015
ECO P02838 15OCT2015
ECOP17505 21APR2016
ECO P17633 1OCT2016
ECOP17764 20MAR2017
ECOP17905 16OCT2017
ECOP17958 Jan 25, 2018
ECOP44540 June 11, 2018
ECOP44680 Mar 5, 2019
ECOP44794 Aug 9, 2019
ECO P44877 15Feb2020
ECO P45188 1Sept2020
ECO P45272 9Mar2021
ECO P45379 18Oct2021
ECO 45443 4April2022
ECO P45475 14Nov2022
This document is the property of IBM. Its use is authorized only for responding to a request for quotation or for the performance of work for IBM. All questions must be referred to the IBM Procurement Department requesting the quotation or performance of work.
Engineering Specification
Page 106 of 197
Exemptions
Australia/New Zealand An external power supply made available by a manufacturer directly to a consumer or service or repair facility after and separate from the original sale of the product requiring the EPS as a service part of spare part shall be exempt from meeting EMSP requirements until 5 years after implementation of the MEPS requirements.
European Union, United Kingdom and other jurisdictions implementing EU regulations This Regulation shall not apply to: (a) voltage converters; (b) uninterruptible power supplies; (c) battery chargers without power supply function (d) lighting converters;
PN 46G3772 Page 106 of 197 EC J85151 13MAY05
EC 899569 04NOV93 EC G32590 08FEB06
EC 899773 07DEC94 EC L04925B 11JAN07
EC F15040 25AUG97 EC L04925M 01AUG07
EC F73298 02SEP99 EC L04925N 19FEB08
EC F74336 05SEP00 EC L05962X 08AUG08
EC F72950 23JAN02 EC L79598 25FEB09
EC H64064 13MAY03 EC N24534E 02OCT09
EC H17205 29JUL03 EC L79598A 22FEB10
EC L79598B 22SEPT10
EC L79598C 27APR2011
EC L79598D 6SEPT2011
EC N31517Y 26MAR2012
ECN31946T 19APR2013
ECN33076 5DEC2013
ECN33076A 16MAY2014
ECN46883 17OCT2014
ECP02692 26MAY2015
ECO P02838 15OCT2015
ECOP17505 21APR2016
ECO P17633 1OCT2016
ECOP17764 20MAR2017
ECOP17905 16OCT2017
ECOP17958 Jan 25, 2018
ECOP44540 June 11, 2018
ECOP44680 Mar 5, 2019
ECOP44794 Aug 9, 2019
ECO P44877 15Feb2020
ECO P45188 1Sept2020
ECO P45272 9Mar2021
ECO P45379 18Oct2021
ECO 45443 4April2022
ECO P45475 14Nov2022
This document is the property of IBM. Its use is authorized only for responding to a request for quotation or for the performance of work for IBM. All questions must be referred to the IBM Procurement Department requesting the quotation or performance of work.
Engineering Specification
Page 107 of 197
(e) external power supplies for medical devices; (f) active power over Ethernet injectors; (g) docking stations for autonomous appliances; (h) external power supplies placed on the market before 1 April 2025 solely as a service part or spare part for replacing an identical external power supply placed on the market before 1 April 2020, under the condition that the service part or spare part, or its packaging, clearly indicate `External power supply to be used exclusively as spare part for' and the primary load product(s) it is intended to be used with.
United States Class A EPSs must meet the energy requirements in the Tier 2 table above. Exceptions to this include EPSs which were:
Manufactured during the period beginning on July 1, 2008, and ending on June 30, 2015; and Made available by the manufacturer as a service part or a spare part for an end-use product
o That constitutes the primary load; and o Was manufactured before July 1, 2008.
United States US Department of Energy will not consider a power supply with any one of the following characteristics to meet the definition of an "external power supply" under US Energy Policy and Conservation Act, so long as the power supply is not, in fact, distributed in commerce for use with a consumer product: 1. a power supply requiring 3-phase input power, which is incapable of operating on household current;
2. a DC-DC only power supply, which is incapable of operating on household current; 3. a power supply with a fixed, non-removable connection to an end-use device that is not a consumer product; 4. a power supply whose output connector is uniquely shaped to fit only an end-use device that is not a consumer product; 5. a power supply that cannot be readily connected to an end-use device that is a consumer product without significant modification or customization of the power supply itself or the end-use device;
6. a power supply packaged with an end-use device that is not a consumer product, as evidenced by either: a.) such device being certified as, or declared to be in conformance with, a specific standard applicable only to nonconsumer products; or b.) such device being excluded or exempted from inclusion within, or conformance with, a law, regulation, or broadly-accepted industry standard where such exclusion or exemption applies only to non-consumer products; or 7. a power supply distributed in commerce for use with an end-use device where: a.) the end-use device is not a consumer product, as evidenced by either the circumstances in (6)(a) or (6)(b) above; and b.) the end-use device for which the power supply is distributed in commerce is reasonably disclosed to the public, such as by identification of the end-use device on the packaging for the power supply, documentation physically present with the power supply, or on the manufacturer's or private labeler's public website; or 8. a power supply that is not marketed for residential or consumer use, and that is clearly marked (or, alternatively, the packaging of the individual power supply, the shipping container of multiple such power supplies, or associated documentation physically present with the power supply when distributed in commerce is clearly marked) "FOR USE WITH COMMERCIAL OR INDUSTRIAL EQUIPMENT ONLY" or "NOT FOR RESIDENTIAL OR CONSUMER USE," with the marking designed and applied so that the marking will be visible and legible during customary conditions for the item on which the marking is placed.
Mexico
This Mexican Official Standard NOM 029-ENER-2017 does not apply to external power supplies:
a) That are designed to deliver an output AC electrical voltage;
b) That are equipped with some type of battery or battery pack (including removable ones) that is physically
connected to the power supply;
c) That are equipped with switch for choosing the battery type (or chemical) and an indicator light or meter that
shows a battery's charge status (a product with a built-in selector switch for battery types and a meter that shows the
status of the battery charge);
PN 46G3772 Page 107 of 197 EC J85151 13MAY05
EC 899569 04NOV93 EC G32590 08FEB06
EC 899773 07DEC94 EC L04925B 11JAN07
EC F15040 25AUG97 EC L04925M 01AUG07
EC F73298 02SEP99 EC L04925N 19FEB08
EC F74336 05SEP00 EC L05962X 08AUG08
EC F72950 23JAN02 EC L79598 25FEB09
EC H64064 13MAY03 EC N24534E 02OCT09
EC H17205 29JUL03 EC L79598A 22FEB10
EC L79598B 22SEPT10
EC L79598C 27APR2011
EC L79598D 6SEPT2011
EC N31517Y 26MAR2012
ECN31946T 19APR2013
ECN33076 5DEC2013
ECN33076A 16MAY2014
ECN46883 17OCT2014
ECP02692 26MAY2015
ECO P02838 15OCT2015
ECOP17505 21APR2016
ECO P17633 1OCT2016
ECOP17764 20MAR2017
ECOP17905 16OCT2017
ECOP17958 Jan 25, 2018
ECOP44540 June 11, 2018
ECOP44680 Mar 5, 2019
ECOP44794 Aug 9, 2019
ECO P44877 15Feb2020
ECO P45188 1Sept2020
ECO P45272 9Mar2021
ECO P45379 18Oct2021
ECO 45443 4April2022
ECO P45475 14Nov2022
This document is the property of IBM. Its use is authorized only for responding to a request for quotation or for the performance of work for IBM. All questions must be referred to the IBM Procurement Department requesting the quotation or performance of work.
Engineering Specification
Page 108 of 197
d) Designed for special uses that are part of the equipment and apparatus that are not sold directly to the public, and that are marketed towards business users or institutions that install or operate the equipment directly, or share responsibility with the supplier, in accordance with the technical features and specifications that have been presented and authorized by the Department that issues this standard.
2.12.3 Laptops, Notebooks
Requirements for the EU, Switzerland, Liechtenstein, Norway, Jordan, Turkey, and other jurisdictions as applicable References EU Regulation 1275/2008 for ecodesign requirements for standby and off mode electric power consumption of electrical and electronic household and office equipment EU Commission Regulation No 801/2013 of 22 August 2013 amending Regulation (EC) No 1275/2008 with regard to ecodesign requirements for standby, off mode electric power consumption of electrical and electronic household and office equipment EU Directive 2009/125/EC of the European Parliament and of the Council of 21 October 2009 establishing a framework for the setting of ecodesign requirements for energy-related products Israel: Energy Sources Law, 1989 - Amendment - (on import of energy efficient electrical appliances compliant with EU Declaration of Conformity), Law, November 2021 Israel Energy Sources (Maximum Electric Power in Standby Mode for Home and Office Appliances), 5771-2011 Regulations Jordan JSNO 2090/2013 Technical Regulation on eco-design requirements for energy related products Jordan JSNO 2109/2013 Technical Regulation on eco-design requirements for standby and off mode electric power consumption of electrical and electronic household and office equipment Turkey: Ecodesign Requirements for Standby, Off and Networked Standby Mode Electric Power Consumption of Electrical and Electronic Household and Office Equipment, Communiqué (2008/1275/EC) (SGM: 2021/13)
Requirements See Section 2.12.14 for energy requirements for EMC Class B (in accordance with EN55022:2006+A1:2007 or EN55022:2010) equipment including external laptops.
Requirements for Vietnam References Vietnam No 04/2017/QD-TTg Decision on promulgating the list of devices and equipment subject to energy labeling, application of minimum energy efficiency and the implementation roadmap. Vietnam No 36/2016/TT-BCT Circular on energy labeling for means and equipment using energy under management of the ministry of industry and trade. Vietnam TCVN 11847:2017 Desktop and Notebook Computers Measuring energy consumption Vietnam TCVN 11848:2017 Notebook Computer Energy Efficiency
Requirements Laptops must be tested and meet the energy requirements in Vietnam Circular No 36/2016/TT-BCT. The laptop must be registered with the Vietnam Ministry of Industry and Trade and be labeled in accordance with Vietnam Decision No 04/2017/QD-TTg and Vietnam Circular No 36/2016/TT-BCT. The labeling is required starting January 1, 2020.
Notebook computers must be tested and meet the energy requirements in Vietnam standard TCVN 11848:2017 Notebook Computer Energy Efficiency.
Requirements for British Columbia, California, Colorado and Washington References California Appliance Efficiency (CEC) Regulations Appliance Efficiency Rulemaking for Computers, Computer Monitors, and Signage Displays. Regulation and details are located at: http://www.energy.ca.gov/ Colorado Revised Statutes Article 7.5 Water and Energy Efficiency Standards
PN 46G3772 Page 108 of 197 EC J85151 13MAY05
EC 899569 04NOV93 EC G32590 08FEB06
EC 899773 07DEC94 EC L04925B 11JAN07
EC F15040 25AUG97 EC L04925M 01AUG07
EC F73298 02SEP99 EC L04925N 19FEB08
EC F74336 05SEP00 EC L05962X 08AUG08
EC F72950 23JAN02 EC L79598 25FEB09
EC H64064 13MAY03 EC N24534E 02OCT09
EC H17205 29JUL03 EC L79598A 22FEB10
EC L79598B 22SEPT10
EC L79598C 27APR2011
EC L79598D 6SEPT2011
EC N31517Y 26MAR2012
ECN31946T 19APR2013
ECN33076 5DEC2013
ECN33076A 16MAY2014
ECN46883 17OCT2014
ECP02692 26MAY2015
ECO P02838 15OCT2015
ECOP17505 21APR2016
ECO P17633 1OCT2016
ECOP17764 20MAR2017
ECOP17905 16OCT2017
ECOP17958 Jan 25, 2018
ECOP44540 June 11, 2018
ECOP44680 Mar 5, 2019
ECOP44794 Aug 9, 2019
ECO P44877 15Feb2020
ECO P45188 1Sept2020
ECO P45272 9Mar2021
ECO P45379 18Oct2021
ECO 45443 4April2022
ECO P45475 14Nov2022
This document is the property of IBM. Its use is authorized only for responding to a request for quotation or for the performance of work for IBM. All questions must be referred to the IBM Procurement Department requesting the quotation or performance of work.
Engineering Specification
Page 109 of 197
Washington Appliance Efficiency Standards Chapter 286 Laws of 2019 British Columbia Energy Efficiency Standards Regulation, 14/2015 B.C. Reg. 35/2021 amending Energy Efficiency Standards Regulation B.C. Reg. 14/2015
Definitions (British Columbia) 2-in-one notebook means a notebook computer (a) with a clam shell form factor and a detachable keyboard, and (b) whose keyboard and display portions are shipped as an integrated unit; Notebook computer means a 2-in-one notebook, mobile thin client, notebook computer with touch-sensitive screen or any other computer, other than a mobile gaming system or mobile workstation, that (a) is designed specifically for portability and to be operated for extended periods with or without a direct connection to an alternating current mains power source, and (b) is sold or offered for sale with an integrated display and physical keyboard.
Requirements (British Columbia) Notebook computers manufactured on or after July 1, 2021, shall meet the efficiency values in the table listed under section 63, and the power management settings under section 65 of Division 3 of Part 9 of B.C. Reg No. 14/2015. An energy efficiency verification label is not required if the product is listed in California Energy Commission Modernized Appliance Efficiency Database System. For specific definitions, requirements, implementation dates and exemptions, see Part 9 of B.C. Reg No. 14/2015.
Definitions (California, Washington, Colorado) Notebook computer means a computer designed specifically for portability and to be operated for extended periods both with and without a direct connection to an AC mains power source. A notebook computer is sold with an integrated display and a physical keyboard. The term "notebook computer" includes two-in-one notebooks, mobile thin clients, multi-screen notebooks, and notebook computer models with touch-sensitive screens. Notebook computer does not include mobile workstations or mobile gaming systems.
Requirements (California, Washington, Colorado) See section 2.12.12 for requirements.
2.12.4 Workstations
Requirements for the EU, Switzerland, Liechtenstein, Norway, Jordan, Turkey, and other jurisdictions as applicable References EU Regulation 1275/2008 for ecodesign requirements for standby and off mode electric power consumption of electrical and electronic household and office equipment EU Commission Regulation No 801/2013 of 22 August 2013 amending Regulation (EC) No 1275/2008 with regard to ecodesign requirements for standby, off mode electric power consumption of electrical and electronic household and office equipment EU Directive 2009/125/EC of the European Parliament and of the Council of 21 October 2009 establishing a framework for the setting of ecodesign requirements for energy-related products Israel Energy Sources (Maximum Electric Power in Standby Mode for Home and Office Appliances), 5771-2011 Regulations Jordan JSNO 2090/2013 Technical Regulation on eco-design requirements for energy related products Jordan JSNO 2109/2013 Technical Regulation on eco-design requirements for standby and off mode electric power consumption of electrical and electronic household and office equipment Turkey: Ecodesign Requirements for Standby, Off and Networked Standby Mode Electric Power Consumption of Electrical and Electronic Household and Office Equipment, Communiqué (2008/1275/EC) (SGM: 2021/13)
Requirements See Section 2.12.14 for energy requirements for EMC Class B (in accordance with EN55022:2006+A1:2007 or EN55022:2010) equipment including workstations.
PN 46G3772 Page 109 of 197 EC J85151 13MAY05
EC 899569 04NOV93 EC G32590 08FEB06
EC 899773 07DEC94 EC L04925B 11JAN07
EC F15040 25AUG97 EC L04925M 01AUG07
EC F73298 02SEP99 EC L04925N 19FEB08
EC F74336 05SEP00 EC L05962X 08AUG08
EC F72950 23JAN02 EC L79598 25FEB09
EC H64064 13MAY03 EC N24534E 02OCT09
EC H17205 29JUL03 EC L79598A 22FEB10
EC L79598B 22SEPT10
EC L79598C 27APR2011
EC L79598D 6SEPT2011
EC N31517Y 26MAR2012
ECN31946T 19APR2013
ECN33076 5DEC2013
ECN33076A 16MAY2014
ECN46883 17OCT2014
ECP02692 26MAY2015
ECO P02838 15OCT2015
ECOP17505 21APR2016
ECO P17633 1OCT2016
ECOP17764 20MAR2017
ECOP17905 16OCT2017
ECOP17958 Jan 25, 2018
ECOP44540 June 11, 2018
ECOP44680 Mar 5, 2019
ECOP44794 Aug 9, 2019
ECO P44877 15Feb2020
ECO P45188 1Sept2020
ECO P45272 9Mar2021
ECO P45379 18Oct2021
ECO 45443 4April2022
ECO P45475 14Nov2022
This document is the property of IBM. Its use is authorized only for responding to a request for quotation or for the performance of work for IBM. All questions must be referred to the IBM Procurement Department requesting the quotation or performance of work.
Engineering Specification
Page 110 of 197
Requirements for British Columbia, California, Colorado and Washington References California Appliance Efficiency (CEC) Regulations Appliance Efficiency Rulemaking for Computers, Computer Monitors, and Signage Displays. Regulation and details are located at: http://www.energy.ca.gov/ Colorado Revised Statutes Article 7.5 Water and Energy Efficiency Standards Washington Appliance Efficiency Standards Chapter 286 Laws of 2019 British Columbia Energy Efficiency Standards Regulation, 14/2015 B.C. Reg. 35/2021 amending Energy Efficiency Standards Regulation B.C. Reg. 14/2015
Definitions (British Columbia) Workstation means a computer that (a) is used for computation-intensive tasks, including graphics, computer-aided design, software development and financial or scientific applications, (b) in its as-shipped configuration, does not support altering frequency or voltage beyond the CPU and the manufacturer's operating specifications for the GPU, (c) has system hardware that supports error-correcting code that detects and corrects errors with dedicated circuitry on and across the CPU, interconnect and system memory, and (d) meets 2 or more of the following criteria: (i) the computer supports one or more discrete GPUs or discrete compute accelerators; (ii) the computer supports 4 or more lanes of peripheral component interconnect-express, other than discrete GPUs, connected to accessory expansion slots or ports where each lane has a bandwidth of 8 gigabits per second or more; (iii) the computer provides multi-processor support for 2 or more physically separate processor packages or sockets; (iv) the computer has received 2 or more independent software vendor product certifications or is being reviewed for 2 or more certifications.
Requirements (British Columbia) Workstations manufactured on or after July 1, 2021, shall meet the efficiency values in the table listed under section 74, and the power management settings under section 76 of Division 5 of Part 9 of B.C. Reg No. 14/2015. An energy efficiency verification label is not required if the product is listed in California Energy Commission Modernized Appliance Efficiency Database System. For specific definitions, requirements, implementation dates and exemptions, see Part 9 of B.C. Reg No. 14/2015.
Definitions (California, Washington, Colorado) Workstation means a computer used for graphics, computer-aided design (CAD), software development, financial, or scientific applications, among other computation intensive tasks. A workstation covered by this specification must meet the following criteria: (1) Product as shipped does not support altering frequency or voltage beyond the computer processing unit and GPU manufacturers' operating specifications; (2) Has system hardware that supports error-correcting code (ECC) that detects and corrects errors with dedicated circuitry on and across the CPU, interconnect, and system memory; and (3) Meets two or more of the following criteria: (A) Supports one or more discrete GPU or discrete compute accelerators. (B) Supports four or more lanes of PCI-express, other than discrete GPU, connected to accessory expansion slots or ports where each lane has a bandwidth of 8 gigabits per second (Gb/s) or more. (C) Provides multi-processor support for two or more physically separate processor packages or sockets. This requirement cannot be met with support for a single multi-core processor. (D) Has qualified or is currently being reviewed for qualification by two or more independent software vendor (ISV) product certifications.
Requirements (California, Washington, Colorado) See section 2.12.12 for requirements.
PN 46G3772 Page 110 of 197 EC J85151 13MAY05
EC 899569 04NOV93 EC G32590 08FEB06
EC 899773 07DEC94 EC L04925B 11JAN07
EC F15040 25AUG97 EC L04925M 01AUG07
EC F73298 02SEP99 EC L04925N 19FEB08
EC F74336 05SEP00 EC L05962X 08AUG08
EC F72950 23JAN02 EC L79598 25FEB09
EC H64064 13MAY03 EC N24534E 02OCT09
EC H17205 29JUL03 EC L79598A 22FEB10
EC L79598B 22SEPT10
EC L79598C 27APR2011
EC L79598D 6SEPT2011
EC N31517Y 26MAR2012
ECN31946T 19APR2013
ECN33076 5DEC2013
ECN33076A 16MAY2014
ECN46883 17OCT2014
ECP02692 26MAY2015
ECO P02838 15OCT2015
ECOP17505 21APR2016
ECO P17633 1OCT2016
ECOP17764 20MAR2017
ECOP17905 16OCT2017
ECOP17958 Jan 25, 2018
ECOP44540 June 11, 2018
ECOP44680 Mar 5, 2019
ECOP44794 Aug 9, 2019
ECO P44877 15Feb2020
ECO P45188 1Sept2020
ECO P45272 9Mar2021
ECO P45379 18Oct2021
ECO 45443 4April2022
ECO P45475 14Nov2022
This document is the property of IBM. Its use is authorized only for responding to a request for quotation or for the performance of work for IBM. All questions must be referred to the IBM Procurement Department requesting the quotation or performance of work.
Engineering Specification
Page 111 of 197
2.12.5 Switches
Requirements for Japan These requirements are from Japan Ordinance No. 39 of the Ministry of Economy, Trade and Industry (METI) amending the Japan Enforcement Regulation of the Law Concerning the Rational Use of Energy.
Definitions Switch Switching apparatus specified by a Cabinet Order set forth in Paragraph 1 of Article 78 of the Law shall be defined in Article 21 in Enforcement Ordinance of the Law Concerning the Rational Use of Energy as below: (xxiii) Switching apparatus (referring to apparatus which transmit and receive telecommunication signals and are capable of selecting, in the transmission of telecommunication signals, such a path as is provided for in the preceding item (i) for each destination from among a plurality of paths through which the said apparatus may transmit telecommunication signals and of transmitting telecommunication signals to each destination through the said path selected (limited to such apparatus used exclusively for telecommunications via the Internet, excluding those capable of wireless communications and other matters specified by an Ordinance of the METI)).
The exclusion from application for switching apparatus prescribed by an Ordinance of the METI as set forth in Article 21, item (xxiii) of the Enforcement Order shall be as follows: (i) Those which do not transmit or exchange any Ethernet frames; (ii) Those which transmit and exchange Internet Protocol packets; (iii) Those with connection ports for transmitting and/or receiving telecommunications signals, half or more of
which use a two-wire connection mode; (iv) Those designed to be capable of being incorporated into items such as a housing or computer; (v) Those intended to control a device that wirelessly relays telecommunication signals; (vi) Those intended mainly for use as a power supply, as specified by the Minister of Economy, Trade and Industry.
Requirements Switch suppliers must provide to IBM the following information with respect to the energy efficiency ratio of an applicable Switch in order to meet the Japanese Energy Savings law:
(a) Product names, including manufacturer's name,
(b) Category letter and the Standard Energy Efficiency Ration, (c) Line speed for a port during measurement and the number of ports per line speed, (d) Maximum effective transmission speed at a frame length of 1,518 bytes, (e) Maximum supply capability achieved by Power over Ethernet (limited to Switches with the Power over
Ethernet function), and (f) Energy efficiency ratio. The above information must be included in a prominent location in a product catalog where either the performance of the Switch is indicated or in a document used for the selection of a Switch.
Requirements for the EU and other CE Marking jurisdictions References EU Regulation 1275/2008 for ecodesign requirements for standby and off mode electric power consumption of electrical and electronic household and office equipment EU Commission Regulation No 801/2013 of 22 August 2013 amending Regulation (EC) No 1275/2008 with regard to ecodesign requirements for standby, off mode electric power consumption of electrical and electronic household and office equipment EU Directive 2009/125/EC of the European Parliament and of the Council of 21 October 2009 establishing a framework for the setting of ecodesign requirements for energy-related products Israel Energy Sources (Maximum Electric Power in Standby Mode for Home and Office Appliances), 5771-2011 Regulations Jordan JSNO 2090/2013 Technical Regulation on eco-design requirements for energy related products Jordan JSNO 2109/2013 Technical Regulation on eco-design requirements for standby and off mode electric power consumption of electrical and electronic household and office equipment
PN 46G3772 Page 111 of 197 EC J85151 13MAY05
EC 899569 04NOV93 EC G32590 08FEB06
EC 899773 07DEC94 EC L04925B 11JAN07
EC F15040 25AUG97 EC L04925M 01AUG07
EC F73298 02SEP99 EC L04925N 19FEB08
EC F74336 05SEP00 EC L05962X 08AUG08
EC F72950 23JAN02 EC L79598 25FEB09
EC H64064 13MAY03 EC N24534E 02OCT09
EC H17205 29JUL03 EC L79598A 22FEB10
EC L79598B 22SEPT10
EC L79598C 27APR2011
EC L79598D 6SEPT2011
EC N31517Y 26MAR2012
ECN31946T 19APR2013
ECN33076 5DEC2013
ECN33076A 16MAY2014
ECN46883 17OCT2014
ECP02692 26MAY2015
ECO P02838 15OCT2015
ECOP17505 21APR2016
ECO P17633 1OCT2016
ECOP17764 20MAR2017
ECOP17905 16OCT2017
ECOP17958 Jan 25, 2018
ECOP44540 June 11, 2018
ECOP44680 Mar 5, 2019
ECOP44794 Aug 9, 2019
ECO P44877 15Feb2020
ECO P45188 1Sept2020
ECO P45272 9Mar2021
ECO P45379 18Oct2021
ECO 45443 4April2022
ECO P45475 14Nov2022
This document is the property of IBM. Its use is authorized only for responding to a request for quotation or for the performance of work for IBM. All questions must be referred to the IBM Procurement Department requesting the quotation or performance of work.
Engineering Specification
Page 112 of 197
Turkey: Ecodesign Requirements for Standby, Off and Networked Standby Mode Electric Power Consumption of Electrical and Electronic Household and Office Equipment, Communiqué (2008/1275/EC) (SGM: 2021/13)
Requirements See Section 2.12.14 for further requirements for EMC Class B switches and routers which are not rack mounted.
2.12.6 Routers
Requirements for Japan These requirements are from Japan Ordinance No. 39 of the METI amending the Japan Enforcement Regulation of the Law Concerning the Rational Use of Energy. English translation is not yet available from the Japan Ministry.
Definitions Router Router apparatus specified by a Cabinet Order set forth in Paragraph 1 of Article 78 of the Law shall be defined in Article 21 in Enforcement Ordinance of the Law Concerning the Rational Use of Energy as below: (xxii) Routing apparatus (referring to apparatus which transmit and receive telecommunication signals and are capable of identifying, in the transmission of telecommunication signals, the path that is the most appropriate of the existing plurality of paths to the destination apparatus according to circumstances such as the conditions of the said paths, and of transmitting the said telecommunication signals through the said path identified as being the most appropriate (limited to such apparatus used exclusively for telecommunications transmission via the Internet, excluding those used for connecting a communication terminal to the Internet via a telephone line for the purpose of telephoning an Internet-access service provider to connect the said communication terminal to the Internet, and other matters specified by an Ordinance of the METI.))
Exclusions from application for the Routing apparatus prescribed by an Enforcement Regulation of the METI as set forth in Article 48, item (20) of the Enforcement regulations shall be as follows: (i) Those which do not transmit or exchange Internet Protocol packets; (ii) Those which transmit Internet Protocol packets at a speed, in terms of the maximum sum of signal bits of the
said packets transmitted per unit time, in excess of 200 megabits per second (excluding those listed in item (vi)); (iii) Those equipped with a device intended for the use of Asynchronous Transfer Mode that cannot be easily removed; (iv) Those with the capability to superimpose a high-frequency current of 10 kilohertz or higher upon a power line; (v) Those with connection ports for transmitting and/or receiving telecommunication signals, at least three of which (excluding such connection ports which use Internet Protocol) are intended for transmitting and/or receiving audio signals; (vi) Those which wirelessly transmit Internet Protocol packets at a speed, in terms of the maximum sum of signal bits of the said packets transmitted per unit time, in excess of 100 megabits per second; (vii) Those with the capability to use an artificial satellite; (viii) Those with the capability to multiplex and then transmit 53 subcarriers or more by an orthogonal frequency division multiplex system; (ix) Those with the capability to set up a virtual closed network; (x) Those designed to be capable of being incorporated into items such as a computer.
Requirements Router suppliers must provide IBM the following information with respect to the energy efficiency ratio of an applicable Router to meet the Japanese Energy Savings law: (a) Product names, including manufacturer's name, (b) Category letter and the Standard Energy Efficiency Ratio, (c) Availability of 2.4 GHz band wireless output power (for Routers falling under category C, limited to cases of
2.4 GHz band wireless transmission only or of simultaneous transmission of waves of the two frequency bands),
PN 46G3772 Page 112 of 197 EC J85151 13MAY05
EC 899569 04NOV93 EC G32590 08FEB06
EC 899773 07DEC94 EC L04925B 11JAN07
EC F15040 25AUG97 EC L04925M 01AUG07
EC F73298 02SEP99 EC L04925N 19FEB08
EC F74336 05SEP00 EC L05962X 08AUG08
EC F72950 23JAN02 EC L79598 25FEB09
EC H64064 13MAY03 EC N24534E 02OCT09
EC H17205 29JUL03 EC L79598A 22FEB10
EC L79598B 22SEPT10
EC L79598C 27APR2011
EC L79598D 6SEPT2011
EC N31517Y 26MAR2012
ECN31946T 19APR2013
ECN33076 5DEC2013
ECN33076A 16MAY2014
ECN46883 17OCT2014
ECP02692 26MAY2015
ECO P02838 15OCT2015
ECOP17505 21APR2016
ECO P17633 1OCT2016
ECOP17764 20MAR2017
ECOP17905 16OCT2017
ECOP17958 Jan 25, 2018
ECOP44540 June 11, 2018
ECOP44680 Mar 5, 2019
ECOP44794 Aug 9, 2019
ECO P44877 15Feb2020
ECO P45188 1Sept2020
ECO P45272 9Mar2021
ECO P45379 18Oct2021
ECO 45443 4April2022
ECO P45475 14Nov2022
This document is the property of IBM. Its use is authorized only for responding to a request for quotation or for the performance of work for IBM. All questions must be referred to the IBM Procurement Department requesting the quotation or performance of work.
Engineering Specification
Page 113 of 197
(d) Availability of 5 GHz band wireless output power (for Routers falling under Category C, limited to cases of 5 GHz band wireless transmission only or of simultaneous transmission of waves of the two frequency bands), and
(e) Energy efficiency ratio. The above information must be included in a prominent location in a product catalog where either the performance of the Router is indicated or in a document used for the selection of a Router.
Requirements for the EU and other CE Marking jurisdictions References EU Regulation 1275/2008 for ecodesign requirements for standby and off mode electric power consumption of electrical and electronic household and office equipment EU Commission Regulation No 801/2013 of 22 August 2013 amending Regulation (EC) No 1275/2008 with regard to ecodesign requirements for standby, off mode electric power consumption of electrical and electronic household and office equipment EU Directive 2009/125/EC of the European Parliament and of the Council of 21 October 2009 establishing a framework for the setting of ecodesign requirements for energy-related products Israel Energy Sources (Maximum Electric Power in Standby Mode for Home and Office Appliances), 5771-2011 Regulations Jordan JSNO 2090/2013 Technical Regulation on eco-design requirements for energy related products Jordan JSNO 2109/2013 Technical Regulation on eco-design requirements for standby and off mode electric power consumption of electrical and electronic household and office equipment Turkey: Ecodesign Requirements for Standby, Off and Networked Standby Mode Electric Power Consumption of Electrical and Electronic Household and Office Equipment, Communiqué (2008/1275/EC) (SGM: 2021/13)
Requirements See Section 2.12.14 for further requirements for EMC Class B switches and routers which are not rack mounted.
2.12.7 Motors
Requirements for the USA Small electric motors, as defined by 42 US Code 6291 (16) and US Code of Federal Regulations 10 CFR Part 431 must have an average full load efficiency as specified in 10 CFR 431.446.
Manufacturer of the motor must supply IBM with a copy of the tested motor's certification document from the certified testing agency.
Additionally, DOE regulates motors that meet all the following requirements: (1) Is a single-speed, induction motor, (2) Is rated for continuous duty (MG 1) operation or for duty type S1 (IEC), (3) Contains a squirrel-cage (MG 1) or cage (IEC) rotor, (4) Operates on polyphase alternating current 60-hertz sinusoidal line power, (5) Is rated 600 volts or less, (6) Has a 2-, 4-, 6-, or 8-pole configuration, (7) Is built in a three-digit or four-digit NEMA frame size (or IEC metric equivalent), including those designs between two consecutive NEMA frame sizes (or IEC metric equivalent), or an enclosed 56 NEMA frame size (or IEC metric equivalent), (8) Produces at least 1 horsepower (0.746 kW) but not greater than 500 horsepower (373 kW), and (9) Meets all of the performance requirements of a NEMA Design A, B, or C motor or of an IEC Design N or H motor.
Definitions
PN 46G3772 Page 113 of 197 EC J85151 13MAY05
EC 899569 04NOV93 EC G32590 08FEB06
EC 899773 07DEC94 EC L04925B 11JAN07
EC F15040 25AUG97 EC L04925M 01AUG07
EC F73298 02SEP99 EC L04925N 19FEB08
EC F74336 05SEP00 EC L05962X 08AUG08
EC F72950 23JAN02 EC L79598 25FEB09
EC H64064 13MAY03 EC N24534E 02OCT09
EC H17205 29JUL03 EC L79598A 22FEB10
EC L79598B 22SEPT10
EC L79598C 27APR2011
EC L79598D 6SEPT2011
EC N31517Y 26MAR2012
ECN31946T 19APR2013
ECN33076 5DEC2013
ECN33076A 16MAY2014
ECN46883 17OCT2014
ECP02692 26MAY2015
ECO P02838 15OCT2015
ECOP17505 21APR2016
ECO P17633 1OCT2016
ECOP17764 20MAR2017
ECOP17905 16OCT2017
ECOP17958 Jan 25, 2018
ECOP44540 June 11, 2018
ECOP44680 Mar 5, 2019
ECOP44794 Aug 9, 2019
ECO P44877 15Feb2020
ECO P45188 1Sept2020
ECO P45272 9Mar2021
ECO P45379 18Oct2021
ECO 45443 4April2022
ECO P45475 14Nov2022
This document is the property of IBM. Its use is authorized only for responding to a request for quotation or for the performance of work for IBM. All questions must be referred to the IBM Procurement Department requesting the quotation or performance of work.
Engineering Specification
Page 114 of 197
Small electric motor means a National Electrical Manufacturers Association (NEMA) general purpose alternating current single-speed induction motor, built in a two-digit frame number series in accordance with NEMA Standards Publication MG1-1987 including IEC metric equivalent motors.
For more definitions of electric motors, see 10 CFR 431.12 Definitions.
The energy efficiency requirements take affect beginning March 9, 2015 and apply to small single phase and polyphase electric motors with a rating from ¼ to 3 horsepower (180 - 2.2kW). The regulatory requirements are effective on March 9th, 2017 for small electric motors which require listing or certification by a nationally recognized safety testing laboratory.
Energy Efficiency Requirements for small electric motors:
Average full load efficiency
Motor horsepower/standard
Polyphase
Kilowatt equivalent
Open motors (number of poles)
6
4
2
0.25/0.18
67.5 69.5 65.6
0.33/0.25
71.4 73.4 69.5
0.5/0.37
75.3 78.2 73.4
0.75/0.55
81.7 81.1 76.8
1/0.75
82.5 83.5 77.0
1.5/1.1
83.8 86.5 84.0
2/1.5
N/A 86.5 85.5
3/2.2
N/A 86.9 85.5
Average full load efficiency
Capacitor-start capacitor-run and
Motor horsepower/standard capacitor-start induction-run
Kilowatt equivalent
Open motors (number of poles)
6
4
2
0.25/0.18
62.2 68.5 66.6
0.33/0.25
66.6 72.4 70.5
0.5/0.37
76.2 76.2 72.4
0.75/0.55
80.2 81.8 76.2
1/0.75
81.1 82.6 80.4
1.5/1.1
N/A 83.8 81.5
2/1.5
N/A 84.5 82.9
3/2.2
N/A N/A 84.1
Energy efficiency requirements for electric motors meeting the above nine requirements can be found in 10 CFR Part 431 Energy Conservation Standards for Commercial and Industrial Electric Motors; Final Rule.
Requirements for the EU and other jurisdictions References EU Regulation 2019/1781 of 1 October 2019 laying down ecodesign requirements for electric motors and variable speed drives pursuant to Directive 2009/125/EC of the European Parliament and of the Council, amending Regulation (EC) No 641/2009 with regard to ecodesign requirements for glandless standalone circulators and glandless circulators integrated in products and repealing Commission Regulation (EC) No 640/2009. EU Regulation 2021/341 of 23 February 2021 amending Regulations (EU) 2019/424, (EU) 2019/1781, (EU) 2019/2019, (EU) 2019/2020, (EU) 2019/2021, (EU) 2019/2022, (EU) 2019/2023 and (EU) 2019/2024 with regard to ecodesign requirements for servers and data storage products, electric motors and variable speed drives, refrigerating appliances, light sources and separate control gears, electronic displays, household dishwashers, household washing machines and household washer-dryers and refrigerating appliances with a direct sales function
PN 46G3772 Page 114 of 197 EC J85151 13MAY05
EC 899569 04NOV93 EC G32590 08FEB06
EC 899773 07DEC94 EC L04925B 11JAN07
EC F15040 25AUG97 EC L04925M 01AUG07
EC F73298 02SEP99 EC L04925N 19FEB08
EC F74336 05SEP00 EC L05962X 08AUG08
EC F72950 23JAN02 EC L79598 25FEB09
EC H64064 13MAY03 EC N24534E 02OCT09
EC H17205 29JUL03 EC L79598A 22FEB10
EC L79598B 22SEPT10
EC L79598C 27APR2011
EC L79598D 6SEPT2011
EC N31517Y 26MAR2012
ECN31946T 19APR2013
ECN33076 5DEC2013
ECN33076A 16MAY2014
ECN46883 17OCT2014
ECP02692 26MAY2015
ECO P02838 15OCT2015
ECOP17505 21APR2016
ECO P17633 1OCT2016
ECOP17764 20MAR2017
ECOP17905 16OCT2017
ECOP17958 Jan 25, 2018
ECOP44540 June 11, 2018
ECOP44680 Mar 5, 2019
ECOP44794 Aug 9, 2019
ECO P44877 15Feb2020
ECO P45188 1Sept2020
ECO P45272 9Mar2021
ECO P45379 18Oct2021
ECO 45443 4April2022
ECO P45475 14Nov2022
This document is the property of IBM. Its use is authorized only for responding to a request for quotation or for the performance of work for IBM. All questions must be referred to the IBM Procurement Department requesting the quotation or performance of work.
Engineering Specification
Page 115 of 197
Israel: Energy Sources Law, 1989 - Amendment - (on import of energy efficient electrical appliances compliant with EU Declaration of Conformity), Law, November 2021 Norway: Environmentally Friendly Design of Energy-Related Products, Regulation No. 190, 2011 - Amendment (on implementing ecodesign requirements for electric motors, transformers, and external power supplies) Regulation No. 1977, 2020. Iceland Regulation 949/2020 on the entry into force of Commission Regulation (EU) 2019/1781 on requirements regarding ecological design of electric motors and rotational speed controls according to Directive 2009/125 / EC of the European Parliament and of the Council amending Regulation (EC)no. 641/2009 with regard to requirements regarding eco-design of independent non-capacitive circulating pumps and non-capacitive circulating pumps incorporated into products. Turkey Ecodesign Requirements for Electric Motors and Variable Speed Drives, Communique SGM: 2021/16 United Kingdom Ecodesign for Energy-Related Products Regulations 2010, SI 2010/2617 United Kingdom Ecodesign for Energy-Related Products and Energy Information Regulations 2021, SI 2021/745
Definitions Electric motor or motor means a device that converts electrical input power into mechanical output power in the form of a rotation with a rotational speed and torque that depends on factors including the frequency of the supply voltage and number of poles of the motor; Mains or electric mains means the electricity supply from the grid. Variable speed drive (VSD) means an electronic power converter that continuously adapts the electrical power supplied to a single motor to control the motor's mechanical power output according to the torque-speed characteristic of the load driven by the motor, by adjusting the power supply to a variable frequency and voltage supplied to the motor. It includes all protection devices and auxiliaries which are integrated in the VSD.
See the regulation for more definitions, a complete outline of requirements, efficiency levels and test methodology.
Scope This Regulation applies to the following products: (a) induction electric motors without brushes, commutators, slip rings or electrical connections to the rotor, rated for operation on a 50 Hz, 60 Hz or 50/60 Hz sinusoidal voltage, that:
(i) have two, four, six or eight poles; (ii) have a rated voltage UN above 50 V and up to and including 1 000 V; (iii) have a rated power output PN from 0,12 kW up to and including 1 000 kW; (iv) are rated on the basis of continuous duty operation; and (v) are rated for direct on-line operation; (b) variable speed drives with 3 phases input that: (i) are rated for operating with one motor referred to in point (a), within the 0,12 kW-1 000 kW motor rated output range; (ii) have a rated voltage above 100 V and up to and including 1 000 V AC; (iii) have only one AC voltage output.
The requirements in section 1, and points (1), (2), (5) to (11), and (13) of section 2 of Annex I of the EU Regulation
2019/1781 shall not apply to the following motors: Please note that Section points 3, 4 and 12 do apply to the
motors listed below.
(a) motors completely integrated into a product (for example into a gear, pump, fan or compressor) and whose
energy performance cannot be tested independently from the product, even with the provision of a temporary
end-shield and drive-end bearing; the motor must share common components (apart from connectors such as bolts)
with the driven unit (for example, a shaft or housing) and shall not be designed in such a way that the motor can be
separated in its entirety from the driven unit and operate independently. The process of separation shall have the
consequence of rendering the motor inoperative;
(b) motors with an integrated variable speed drive (compact drives) whose energy performance cannot be tested
independently from the variable speed drive;
(c) motors with an integrated brake which forms an integral part of the inner motor construction and can neither be
removed nor powered by a separate power source during the testing of the motor efficiency;
PN 46G3772 Page 115 of 197 EC J85151 13MAY05
EC 899569 04NOV93 EC G32590 08FEB06
EC 899773 07DEC94 EC L04925B 11JAN07
EC F15040 25AUG97 EC L04925M 01AUG07
EC F73298 02SEP99 EC L04925N 19FEB08
EC F74336 05SEP00 EC L05962X 08AUG08
EC F72950 23JAN02 EC L79598 25FEB09
EC H64064 13MAY03 EC N24534E 02OCT09
EC H17205 29JUL03 EC L79598A 22FEB10
EC L79598B 22SEPT10
EC L79598C 27APR2011
EC L79598D 6SEPT2011
EC N31517Y 26MAR2012
ECN31946T 19APR2013
ECN33076 5DEC2013
ECN33076A 16MAY2014
ECN46883 17OCT2014
ECP02692 26MAY2015
ECO P02838 15OCT2015
ECOP17505 21APR2016
ECO P17633 1OCT2016
ECOP17764 20MAR2017
ECOP17905 16OCT2017
ECOP17958 Jan 25, 2018
ECOP44540 June 11, 2018
ECOP44680 Mar 5, 2019
ECOP44794 Aug 9, 2019
ECO P44877 15Feb2020
ECO P45188 1Sept2020
ECO P45272 9Mar2021
ECO P45379 18Oct2021
ECO 45443 4April2022
ECO P45475 14Nov2022
This document is the property of IBM. Its use is authorized only for responding to a request for quotation or for the performance of work for IBM. All questions must be referred to the IBM Procurement Department requesting the quotation or performance of work.
Engineering Specification
Page 116 of 197
(d) motors specifically designed and specified to operate exclusively: (i) at altitudes exceeding 4 000 meters above sea-level; (ii) where ambient air temperatures exceed 60 °C; (iii) in maximum operating temperature above 400 °C; (iv) where ambient air temperatures are less than 30 °C; or (v) where the water coolant temperature at the inlet to a product is below 0 °C or above 32 °C; (e) motors specifically designed and specified to operate wholly immersed in a liquid; (f) motors specifically qualified for the safety of nuclear installations, as defined in Article 3 of Council Directive 2009/71/Euratom (8); (g) explosion-protected motors specifically designed and certified for mining, as defined in Annex I, point 1 of Directive 2014/34/EU of the European Parliament and of the Council (9); (h) motors in cordless or battery-operated equipment; (i) motors in hand-held equipment whose weight is supported by hand during operation; (j) motors in hand-guided mobile equipment moved while in operation; (k) motors with mechanical commutators; (l) Totally Enclosed Non-Ventilated (TENV) motors; (m) motors placed on the market before 1 July 2029 as substitutes for identical motors integrated in products placed on the market before 1 July 2021 for motors referred to in Annex I.1 (a), and before 1 July 2023 for motors referred to in Annex I.1 (b), and specifically marketed as such; (n) multi-speed motors, i.e. motors with multiple windings or with a switchable winding, providing a different number of poles and speeds; (o) motors designed specifically for the traction of electric vehicles.
The requirements in section 3, and points (1), (2), and (5) to (10) of section 4 of Annex I of the EU Regulation 2019/1781 shall not apply to the following VSDs: Please note that points 3, 4 and 11 of section 4 do apply to the VSDs listed below. (a) VSDs integrated into a product and whose energy performance cannot be tested independently from the product, that is to say that an attempt to do so would render the VSD or the product inoperative; (b) VSDs qualified specifically for the safety of nuclear installations, as defined Article 3 of Directive 2009/71/Euratom; (c) regenerative drives; (d) drives with sinusoidal input current. (e) VSDs consisting of a single cabinet, comprising VSDs which are all in conformity with this Regulation.
Requirements Motors, within scope of this regulation shall not be designed to be able to detect they are being tested (e.g. by recognizing the test conditions or test cycle), and to react specifically by automatically altering their performance during the test with the aim of reaching a more favorable level for any of the parameters specified in this Regulation or declared by the manufacturer in the technical documentation or included in any of the documentation provided. The energy consumption of the motors within scope of this regulation and any of the other declared parameters shall not deteriorate after a software or firmware update when measured with the same test standard originally used for the declaration of conformity. No deterioration of performance shall occur as result of rejecting the update. A software update shall never have the effect of changing the product's performance in a way that makes it noncompliant with the ecodesign requirements applicable for the declaration of conformity.
These requirements shall apply starting July 1, 2021 except for the paragraph above in regard to deterioration of performance, these requirements are effective November 14, 2019.
Energy efficiency requirements for motors shall apply according to the following timetable: (a) from 1 July 2021: (i) the energy efficiency of three-phase motors with a rated output equal to or above 0,75 kW and equal to or below 1 000 kW, with 2, 4, 6 or 8 poles, which are not Ex eb increased safety motors, shall correspond to at least the IE3 efficiency level set out in Table 2 or in Table 3b as appropriate (of the regulation); (ii) the energy efficiency of three-phase motors with a rated output equal to or above 0,12 kW and below 0,75 kW, with 2, 4, 6 or 8 poles, which are not Ex eb increased safety motors, shall correspond to at least the IE2 efficiency level set out in Table 1 or in Table 3a as appropriate (of the regulation);
PN 46G3772 Page 116 of 197 EC J85151 13MAY05
EC 899569 04NOV93 EC G32590 08FEB06
EC 899773 07DEC94 EC L04925B 11JAN07
EC F15040 25AUG97 EC L04925M 01AUG07
EC F73298 02SEP99 EC L04925N 19FEB08
EC F74336 05SEP00 EC L05962X 08AUG08
EC F72950 23JAN02 EC L79598 25FEB09
EC H64064 13MAY03 EC N24534E 02OCT09
EC H17205 29JUL03 EC L79598A 22FEB10
EC L79598B 22SEPT10
EC L79598C 27APR2011
EC L79598D 6SEPT2011
EC N31517Y 26MAR2012
ECN31946T 19APR2013
ECN33076 5DEC2013
ECN33076A 16MAY2014
ECN46883 17OCT2014
ECP02692 26MAY2015
ECO P02838 15OCT2015
ECOP17505 21APR2016
ECO P17633 1OCT2016
ECOP17764 20MAR2017
ECOP17905 16OCT2017
ECOP17958 Jan 25, 2018
ECOP44540 June 11, 2018
ECOP44680 Mar 5, 2019
ECOP44794 Aug 9, 2019
ECO P44877 15Feb2020
ECO P45188 1Sept2020
ECO P45272 9Mar2021
ECO P45379 18Oct2021
ECO 45443 4April2022
ECO P45475 14Nov2022
This document is the property of IBM. Its use is authorized only for responding to a request for quotation or for the performance of work for IBM. All questions must be referred to the IBM Procurement Department requesting the quotation or performance of work.
Engineering Specification
Page 117 of 197
(b) from 1 July 2023: (i) the energy efficiency of Ex eb increased safety motors with a rated output equal to or above 0,12 kW and equal to or below 1 000 kW, with 2, 4, 6 or 8 poles, and single-phase motors with a rated output equal to or above 0,12 kW shall correspond to at least the IE2 efficiency level set out in Table 1 or in Table 3a as appropriate (of the regulation); (ii) the energy efficiency of three-phase motors which are not brake motors, Ex eb increased safety motors, or other explosion-protected motors, with a rated output equal to or above 75 kW and equal to or below 200 kW, with 2, 4, or 6 poles, shall correspond to at least the IE4 efficiency level set out in Table 3 or in Table 3c as appropriate (of the regulation).
Energy efficiency of motors, expressed in International Energy efficiency classes (IE), is set out in Tables 1 to 3c for different values of the motor rated output power PN, at 50 Hz or 60 Hz. IE classes are determined at rated output power (PN), rated voltage (UN), and based on 25 °C ambient reference temperature. For 50/60 Hz motors, the requirements above shall be met at both 50 Hz and 60 Hz at the rated output power specified for 50 Hz. For 50Hz or 60Hz motors the requirements above shall be met at respectively 50Hz or 60Hz at the rated output power specified respectively for 50 Hz or 60 Hz.
Product Information Requirements for Motors The product information requirements set out in points (1) to (13) below shall be visibly displayed on: (a) the technical data sheet or user manual supplied with the motor unless an internet link to that information is supplied with the product. A QR code may in addition be supplied with a link to the information; (b) the technical documentation for the purposes of conformity assessment pursuant to Article 5; (c) free access websites of the manufacturer of the motor, its authorized representative or the importer, and; (d) the technical data sheet supplied with products in which the motor is incorporated. As regards to the technical documentation, the information shall be provided in the order as set out in points (1) to (13). The exact wording used in the list does not need to be repeated. The information may be displayed using clearly understandable graphs figures or symbols rather than text.
From 1 July 2021 for motors referred to in Annex I.1 (a) (of the regulation), and from 1 July 2023 for motors referred to in Annex I.1 (b) (i) (of the regulation): (1) rated efficiency (N) at the full, 75 % and 50 % rated load, and rated voltage(s) (UN), determined based on 25 °C ambient reference temperature, rounded to one decimal place; (2) efficiency level: `IE2' `IE3' or `IE4', as determined in the first section of this Annex; (3) manufacturer's name or trademark, commercial registration number and address; (4) product's model identifier; (5) number of poles of the motor; (6) the rated power output(s) PN or range of rated power output (kW); (7) the rated input frequency(s) of the motor (Hz); (8) the rated voltage(s) or range of rated voltage (V); (9) the rated speed(s) or range of rated speed (rpm); (10) whether single-phase or three-phase; (11) information on the range of operating conditions for which the motor is designed:
(a) altitudes above sea-level; (b) minimum and maximum ambient air temperatures including for motors with air cooling; (c) water coolant temperature at the inlet to the product, where applicable; (d) maximum operating temperature; (e) potentially explosive atmospheres; (12) if the motor is considered exempt from efficiency requirement in accordance with Article 2(2) of this Regulation, the specific reason why it is considered exempt. From 1 July 2022: (13) The power losses expressed in percentage (%) of the rated output power at the following different operating points for speed versus torque: (25;25) (25;100) (50;25) (50;50) (50;100) (90;50) (90;100) determined based on 25
PN 46G3772 Page 117 of 197 EC J85151 13MAY05
EC 899569 04NOV93 EC G32590 08FEB06
EC 899773 07DEC94 EC L04925B 11JAN07
EC F15040 25AUG97 EC L04925M 01AUG07
EC F73298 02SEP99 EC L04925N 19FEB08
EC F74336 05SEP00 EC L05962X 08AUG08
EC F72950 23JAN02 EC L79598 25FEB09
EC H64064 13MAY03 EC N24534E 02OCT09
EC H17205 29JUL03 EC L79598A 22FEB10
EC L79598B 22SEPT10
EC L79598C 27APR2011
EC L79598D 6SEPT2011
EC N31517Y 26MAR2012
ECN31946T 19APR2013
ECN33076 5DEC2013
ECN33076A 16MAY2014
ECN46883 17OCT2014
ECP02692 26MAY2015
ECO P02838 15OCT2015
ECOP17505 21APR2016
ECO P17633 1OCT2016
ECOP17764 20MAR2017
ECOP17905 16OCT2017
ECOP17958 Jan 25, 2018
ECOP44540 June 11, 2018
ECOP44680 Mar 5, 2019
ECOP44794 Aug 9, 2019
ECO P44877 15Feb2020
ECO P45188 1Sept2020
ECO P45272 9Mar2021
ECO P45379 18Oct2021
ECO 45443 4April2022
ECO P45475 14Nov2022
This document is the property of IBM. Its use is authorized only for responding to a request for quotation or for the performance of work for IBM. All questions must be referred to the IBM Procurement Department requesting the quotation or performance of work.
Engineering Specification
Page 118 of 197
°C ambient reference temperature, rounded to one decimal place; if the motor is not suited for operation at any of the operating points for speed versus torque above, then `N.A.' or `Not Applicable' should be indicated for such points.
The information referred to in points (1) and (2) as well as the year of manufacture shall be durably marked on or near the rating plate of the motor. Where the size of the rating plate makes it impossible to mark all the information referred to in point (1) only the rated efficiency at full rated load and voltage shall be marked. The information listed in points (1) to (13) does not need to be published on free access websites for tailor-made motors with a special mechanical and electrical design manufactured on the basis of a specific client request if this information is included in the commercial offers provided to the clients. Manufacturers shall provide information in the technical data sheet or user manual supplied with the motor on any specific precautions that must be taken when motors are assembled, installed, maintained or used with variable speed drives. For motors exempt from the efficiency requirements in accordance with point 2(m) of Article 2 of this Regulation, the motor or its packaging and the documentation must clearly indicate "Motor to be used exclusively as spare part for" and the unique model identification of the product(s) for which it is intended. For 50 Hz and 60 Hz motors, the data set out above is provided at the applicable frequency, while for 50/60 Hz motors it is sufficient to provide the data at 50 Hz, except for the rated efficiency at full load, which shall be specified at both 50Hz and 60Hz.
Efficiency Requirements for Variable Speed Drives Efficiency requirements for variable speed drives shall apply as follows:
From 1 July 2021, the power losses of variable speed drives rated for operating with motors with a rated output power equal to or above 0,12 kW and equal to or below 1 000 kW shall not exceed the maximum power losses corresponding to the IE2 efficiency level.
Energy efficiency for VSDs, expressed in International Energy efficiency classes (IE), is determined based on the power losses as follows:
The maximum power losses of the IE2 class are 25 % lower than the reference value referred to in Table 6 (of the regulation).
Product Information Requirements for Variable Speed Drives From 1 July 2021, the product information on variable speed drives set out in points (1) to (11) shall be visibly displayed on: (a) the technical data sheet or user manual supplied with the VSD, unless an internet link to that information is supplied with the product. A QR code may in addition be supplied with a link to the information; (b) the technical documentation for the purposes of conformity assessment pursuant to Article 5; (c) free access websites of the manufacturer, its authorized representative or the importer and; (d) the technical data sheet supplied with products in which the VSD is incorporated.
As regards to the technical documentation, the information shall be provided in the order as listed in points (1) to (11). The exact wording used in the list does not need to be repeated. It may be displayed using clearly understandable graphs figures or symbols rather than text: (1) power losses in % of the rated apparent output power at the following different operating points for relative motor stator frequency versus relative torque-producing current (0;25) (0;50) (0;100) (50;25) (50;50) (50;100) (90;50) (90;100), as well as standby losses, generated when the VSD is powered up but is not providing current to the load, rounded to one decimal place; (2) efficiency level: `IE2' as determined in the third section of this annex; (3) manufacturer's name or trademark, commercial registration number and address; (4) product's model identifier; (5) apparent output power or range of apparent output power (kVA); (6) indicative motor rated power output(s) PN or range of rated power output (kW); (7) rated output current (A); (8) maximum operating temperature (°C);
PN 46G3772 Page 118 of 197 EC J85151 13MAY05
EC 899569 04NOV93 EC G32590 08FEB06
EC 899773 07DEC94 EC L04925B 11JAN07
EC F15040 25AUG97 EC L04925M 01AUG07
EC F73298 02SEP99 EC L04925N 19FEB08
EC F74336 05SEP00 EC L05962X 08AUG08
EC F72950 23JAN02 EC L79598 25FEB09
EC H64064 13MAY03 EC N24534E 02OCT09
EC H17205 29JUL03 EC L79598A 22FEB10
EC L79598B 22SEPT10
EC L79598C 27APR2011
EC L79598D 6SEPT2011
EC N31517Y 26MAR2012
ECN31946T 19APR2013
ECN33076 5DEC2013
ECN33076A 16MAY2014
ECN46883 17OCT2014
ECP02692 26MAY2015
ECO P02838 15OCT2015
ECOP17505 21APR2016
ECO P17633 1OCT2016
ECOP17764 20MAR2017
ECOP17905 16OCT2017
ECOP17958 Jan 25, 2018
ECOP44540 June 11, 2018
ECOP44680 Mar 5, 2019
ECOP44794 Aug 9, 2019
ECO P44877 15Feb2020
ECO P45188 1Sept2020
ECO P45272 9Mar2021
ECO P45379 18Oct2021
ECO 45443 4April2022
ECO P45475 14Nov2022
This document is the property of IBM. Its use is authorized only for responding to a request for quotation or for the performance of work for IBM. All questions must be referred to the IBM Procurement Department requesting the quotation or performance of work.
Engineering Specification
Page 119 of 197
(9) rated supply frequency(s) (Hz); (10) rated supply voltage(s) or range of rated supply voltage (V); (11) if the VSD is considered exempt from the efficiency requirements in accordance with Article 2(3) of this Regulation the specific reason why it is considered exempt.
The information listed above in points (1) to (11) does not need to be published on free access websites for tailormade VSDs with special electrical design manufactured on the basis of a specific client request if this information is included in the commercial offers provided to the clients.
Nameplate Marking The information referred to in points (1) and (2) as well as the year of manufacture shall be durably marked on or near the rating plate of the VSD. Where the size of the rating plate makes it impossible to mark all the information referred to in point (1) only the power losses in % of the rated apparent output power at (90;100), rounded to one decimal place, shall be marked.
2.12.8 Water Pumps
Requirements for the EU, Norway, Turkey, and other jurisdictions as applicable References EU Commission Regulation (EC) No 547/2012 (implementing Directive 2009/125/EC of the European Parliament and of the Council) with regard to ecodesign requirements for water pumps. EU Commission communication 2012/C 402/07. EU Directive 2009/125/EC of the European Parliament and of the Council of 21 October 2009 establishing a framework for the setting of ecodesign requirements for energy-related products EU Commission Regulation 2019/1781 of 1 October 2019 laying down ecodesign requirements for electric motors and variable speed drives pursuant to Directive 2009/125/EC of the European Parliament and of the Council, amending Regulation (EC) No 641/2009 with regard to ecodesign requirements for glandless standalone circulators and glandless circulators integrated in products and repealing Commission Regulation (EC) No 640/2009. Norway: Environmentally Friendly Design of Energy-Related Products, Regulation No. 190, 2011 - Amendment (on implementing ecodesign requirements for electric motors, transformers, and external power supplies) Regulation No. 1977, 2020. Iceland Regulation 949/2020 on the entry into force of Commission Regulation (EU) 2019/1781 on requirements regarding ecological design of electric motors and rotational speed controls according to Directive 2009/125 / EC of the European Parliament and of the Council amending Regulation (EC)no. 641/2009 with regard to requirements regarding eco-design of independent non-capacitive circulating pumps and non-capacitive circulating pumps incorporated into products. United Kingdom Ecodesign for Energy-Related Products and Energy Information (Amendment) (EU Exit) Regulations 2019, SI 2019/539 United Kingdom Ecodesign for Energy-Related Products and Energy Information (Amendment) (EU Exit) Regulations 2020, SI 2020/1528 United Kingdom Ecodesign for Energy-Related Products and Energy Information Regulations 2021, SI 2021/745 United Kingdom Ecodesign for Energy-Related Products Regulations 2010, SI 2010/2617 EU Regulation 547/2012 establishes requirements for rotodynamic water pumps for pumping clean water, including where integrated in other products.
Definitions
Water pump is the hydraulic part of a device that moves clean water by physical or mechanical action and is of one
of the following designs:
End suction own bearing (ESOB),
End suction close coupled (ESCC),
End suction close coupled inline (ESCCi),
Vertical multistage (MS-V),
Submersible multistage (MSS).
PN 46G3772 Page 119 of 197 EC J85151 13MAY05
EC L79598B 22SEPT10
EC 899569 04NOV93 EC G32590 08FEB06
EC L79598C 27APR2011
EC 899773 07DEC94 EC L04925B 11JAN07
EC L79598D 6SEPT2011
EC F15040 25AUG97 EC L04925M 01AUG07
EC N31517Y 26MAR2012
EC F73298 02SEP99 EC L04925N 19FEB08
ECN31946T 19APR2013
EC F74336 05SEP00 EC L05962X 08AUG08
ECN33076 5DEC2013
EC F72950 23JAN02 EC L79598 25FEB09
ECN33076A 16MAY2014
EC H64064 13MAY03 EC N24534E 02OCT09
ECN46883 17OCT2014
EC H17205 29JUL03 EC L79598A 22FEB10
ECP02692 26MAY2015
ECO P02838 15OCT2015
ECO P44877 15Feb2020
ECOP17505 21APR2016
ECO P45188 1Sept2020
ECO P17633 1OCT2016
ECO P45272 9Mar2021
ECOP17764 20MAR2017
ECO P45379 18Oct2021
ECOP17905 16OCT2017
ECO 45443 4April2022
ECOP17958 Jan 25, 2018
ECO P45475 14Nov2022
ECOP44540 June 11, 2018
ECOP44680 Mar 5, 2019
ECOP44794 Aug 9, 2019
This document is the property of IBM. Its use is authorized only for responding to a request for quotation or for the performance of work for IBM. All questions must be referred to the IBM Procurement Department requesting the quotation or performance of work.
Engineering Specification
Page 120 of 197
Clean water means water with a maximum non-absorbent free solid content of 0.25 kg/m 3, and with a maximum dissolved solid content of 50 kg/m 3, provided that the total gas content of the water does not exceed the saturation volume. Any additives that are needed to avoid water freezing down to 10 °C shall not be taken into account. Rotodynamic water pump means a water pump that moves clean water by means of hydrodynamic forces.
Requirements Annex II of this Regulation sets out the efficiency and information requirements for rotodynamic water pumps. Manufacturers of rotodynamic water pumps must have a conformity assessment procedure and technical documentation as set out in the regulation. Manufacturers must place the technical documentation on a free access website. These pumps must be labeled in accordance with CE and UKCA Marking requirements and a CE and UK Declaration of Conformity (DoC) certificate must be provided to IBM in accordance with Annex VI of EU Directive 2009/125/EC of 21 October 2009 establishing a framework for the setting of ecodesign requirements for energyrelated products and a schedule 1 of the Ecodesign for Energy-Related Products Regulations 2010, UKSI 2010/2617.
Where a rotodynamic water pump has a motor or variable speed drives, as defined by EU Commission Regulation 2019/1781 of 1 October 2019 laying down ecodesign requirements for electric motors and variable speed drives, the motor must meet the requirements as outlined in Section 12.2.7 in this specification for this EU regulation. Note that several of the requirements are not applicable to motors completely integrated into a product.
Requirements for Canada Reference Canada Energy Efficiency Regulations Amendment 16
Definitions Clean water means water that has a maximum non-absorbent solid content of 0.25 kg/m3(0.016 lb/ft3), a maximum dissolved solid content of 50 kg/m3 (3.1 lb/ft3) and a total gas content that does not exceed the saturation volume and that may include additives necessary to prevent the water from freezing down to -10°C (14°F)
Clean water pump means a pump with or without mechanical equipment, driver and controls, that is designed for pumping clean water other than a fire pump, a self-priming pump, a prime-assist pump, a magnet-driven pump, a pump designed to be used in a nuclear facility, a pump designed to Canadian or United States military specifications or a pump designed and marketed for use as a pool pump, that (a) is one of the following types: o (i) an end suction close-coupled pump with a maximum specific speed of 5000 RPM, o (ii) an end suction frame mounted pump with its own bearings and with a specific speed not more than 5000 RPM, o (iii) an in-line pump, o (iv) a radially split, multi-stage, vertical, in-line diffuser casing pump, or o (v) a submersible turbine pump with a bowl diameter not greater than 152 mm (6 in), (b) has a shaft input power not less than 0.75 kW (1 horsepower) and not greater than 150 kW (200 horsepower) at best efficiency point and full impeller diameter; (c) has a flow rate of 5.68 m3/h (25 US gallons/min) or greater at best efficiency point and full impeller diameter; (d) has a maximum head of 139.9 m (459 ft) at best efficiency point and full impeller diameter; (e) has a design temperature range that lies within -10 and 120°C (14 and 248°F); and (f) is designed to operate with either a 2-pole or 4-pole induction motor or a non-induction motor with a nominal speed of rotation of either 1800 RPM or 3600 RPM, as determined in accordance with 10 C.F.R. Appendix A, and in which the driver and impeller rotate at the same speed.
Requirements These regulations apply to clean water pumps manufactured on or after January 27, 2020.
The energy efficiency standard that applies to a clean water pump is the maximum pump energy index set out for the applicable equipment class in USA 10 Code of Federal Register 431.465(b)(4). Testing standard (2) A clean water pump complies with the energy efficiency standard if it meets that standard when tested in accordance with testing
PN 46G3772 Page 120 of 197 EC J85151 13MAY05
EC 899569 04NOV93 EC G32590 08FEB06
EC 899773 07DEC94 EC L04925B 11JAN07
EC F15040 25AUG97 EC L04925M 01AUG07
EC F73298 02SEP99 EC L04925N 19FEB08
EC F74336 05SEP00 EC L05962X 08AUG08
EC F72950 23JAN02 EC L79598 25FEB09
EC H64064 13MAY03 EC N24534E 02OCT09
EC H17205 29JUL03 EC L79598A 22FEB10
EC L79598B 22SEPT10
EC L79598C 27APR2011
EC L79598D 6SEPT2011
EC N31517Y 26MAR2012
ECN31946T 19APR2013
ECN33076 5DEC2013
ECN33076A 16MAY2014
ECN46883 17OCT2014
ECP02692 26MAY2015
ECO P02838 15OCT2015
ECOP17505 21APR2016
ECO P17633 1OCT2016
ECOP17764 20MAR2017
ECOP17905 16OCT2017
ECOP17958 Jan 25, 2018
ECOP44540 June 11, 2018
ECOP44680 Mar 5, 2019
ECOP44794 Aug 9, 2019
ECO P44877 15Feb2020
ECO P45188 1Sept2020
ECO P45272 9Mar2021
ECO P45379 18Oct2021
ECO 45443 4April2022
ECO P45475 14Nov2022
This document is the property of IBM. Its use is authorized only for responding to a request for quotation or for the performance of work for IBM. All questions must be referred to the IBM Procurement Department requesting the quotation or performance of work.
Engineering Specification
Page 121 of 197
procedures established by USA 10 Code of Federal Register Appendix A that apply to a clean water pump. Information The following information must be provided to the Canadian authorities in respect of a clean water pump: · (a) its nominal power in kilowatts; · (b) the impeller diameter in millimeters; · (c) its type, namely, end suction close-coupled pump, end suction frame mounted with own bearings pump, in-line pump, radially split multi-stage, vertical, in-line diffuser casing pump or submersible turbine pump; · (d) its nominal speed of rotation collected in accordance with 10 C.F.R. Appendix A; · (e) its mode of operation, namely, constant load or variable load; and · (f) its pump energy index value collected in accordance with 10 C.F.R. Appendix A.
2.12.9 Fans
Requirements for the EU, Jordan, Norway, Turkey, and other jurisdictions as applicable References EU Commission Regulation (EC) No 327/2011 (implementing Directive 2009/125/EC of the European Parliament and of the Council) with regard to ecodesign requirements for fans driven by motors with an electric input power between 125 W and 500 kW. EU Directive 2009/125/EC of the European Parliament and of the Council of 21 October 2009 establishing a framework for the setting of ecodesign requirements for energy-related products EU Commission Regulation 2019/1781 of 1 October 2019 laying down ecodesign requirements for electric motors and variable speed drives pursuant to Directive 2009/125/EC of the European Parliament and of the Council, amending Regulation (EC) No 641/2009 with regard to ecodesign requirements for glandless standalone circulators and glandless circulators integrated in products and repealing Commission Regulation (EC) No 640/2009. These regulations must be referenced to clarify details such as definitions, product information, measurements and calculations and methodology for calculating the target energy efficiency. Norway: Environmentally Friendly Design of Energy-Related Products, Regulation No. 190, 2011 - Amendment (on implementing ecodesign requirements for electric motors, transformers, and external power supplies) Regulation No. 1977, 2020. Iceland Regulation 949/2020 on the entry into force of Commission Regulation (EU) 2019/1781 on requirements regarding ecological design of electric motors and rotational speed controls according to Directive 2009/125 / EC of the European Parliament and of the Council amending Regulation (EC)no. 641/2009 with regard to requirements regarding eco-design of independent non-capacitive circulating pumps and non-capacitive circulating pumps incorporated into products. Jordan JSNO 2090/2013 Technical Regulation on eco-design requirements for energy related products. Jordan JSNO 2112/2013 Technical Regulation on eco-design requirements on eco-design requirements for fans. Turkey: Communiqué 2019/15 Eco-design Requirements for Fans Driven by Motors with an Electric Input Power
Between 125 W and 500 kW.
United Kingdom Ecodesign for Energy-Related Products and Energy Information (Amendment) (EU Exit) Regulations 2019, SI 2019/539 United Kingdom Ecodesign for Energy-Related Products and Energy Information (Amendment) (EU Exit) Regulations 2020, SI 2020/1528 United Kingdom Ecodesign for Energy-Related Products and Energy Information Regulations 2021, SI 2021/745 United Kingdom Ecodesign for Energy-Related Products Regulations 2010, SI 2010/2617
Definitions Fan means a rotary bladed machine that is used to maintain a continuous flow of gas, typically air, passing through it and whose work per unit mass does not exceed 25 kJ/kg, and which:
1. is designed for use with or equipped with an electrical motor with an electric input power between 125W and 500 kW (> 125 W and < 500 kW) to drive the impeller at its optimum energy efficiency point,
2. is an axial fan, centrifugal fan, cross flow fan or mixed flow fan, 3. May or may not be equipped with a motor when placed on the market or put into service.
PN 46G3772 Page 121 of 197 EC J85151 13MAY05
EC 899569 04NOV93 EC G32590 08FEB06
EC 899773 07DEC94 EC L04925B 11JAN07
EC F15040 25AUG97 EC L04925M 01AUG07
EC F73298 02SEP99 EC L04925N 19FEB08
EC F74336 05SEP00 EC L05962X 08AUG08
EC F72950 23JAN02 EC L79598 25FEB09
EC H64064 13MAY03 EC N24534E 02OCT09
EC H17205 29JUL03 EC L79598A 22FEB10
EC L79598B 22SEPT10
EC L79598C 27APR2011
EC L79598D 6SEPT2011
EC N31517Y 26MAR2012
ECN31946T 19APR2013
ECN33076 5DEC2013
ECN33076A 16MAY2014
ECN46883 17OCT2014
ECP02692 26MAY2015
ECO P02838 15OCT2015
ECOP17505 21APR2016
ECO P17633 1OCT2016
ECOP17764 20MAR2017
ECOP17905 16OCT2017
ECOP17958 Jan 25, 2018
ECOP44540 June 11, 2018
ECOP44680 Mar 5, 2019
ECOP44794 Aug 9, 2019
ECO P44877 15Feb2020
ECO P45188 1Sept2020
ECO P45272 9Mar2021
ECO P45379 18Oct2021
ECO 45443 4April2022
ECO P45475 14Nov2022
This document is the property of IBM. Its use is authorized only for responding to a request for quotation or for the performance of work for IBM. All questions must be referred to the IBM Procurement Department requesting the quotation or performance of work.
Engineering Specification
Page 122 of 197
More definitions, including those defining the fan type, can be found in the Regulation cited above. The regulation also further describes fans which are out of scope.
Requirements Fans placed on the market before January 1, 2015 as replacement for identical fans integrated into products which were placed on the market before January 1, 2013 are exempt. The packaging, product information, and technical documentation as required by the Regulation must clearly indicate this. Information must accompany these fans indicating that the fan shall only be used for the purpose for which it is intended.
Fans in scope of this regulation must meet the energy efficiency requirements in the table below. The efficiency requirements in the table below do not apply to fans which are designed to operate with an optimum energy efficiency at 8000 rotations per minute or more, or in applications in which the `specific ratio' is over 1.11.
Minimum energy efficiency requirements for fans
Fan Types Measurement
Efficiency
category (A- category (static or
D)
total)
Axial Fan
A, C
Static
B, D
Total
Centrifugal
A, C
forward
curved fan
B, D
and
centrifugal
radial bladed
fan
Centrifugal
A, C
backward
curved fan
without
housing
Centrifugal
A, C
backward
curved fan
B, D
with housing
Mixed flow
A, C
fan
B, D
Static Total
Static
Static Total Static Total
Cross flow
B, D
fan
Total
Power range P in kW
0.125 < P < 10 10 < P < 500 0.125 < P < 10 10 < P < 500 0.125 < P < 10 10 < P < 500 0.125 < P < 10 10 < P < 500
0.125 < P < 10 10 < P < 500
0.125 < P < 10 10 < P < 500 0.125 < P < 10 10 < P < 500 0.125 < P < 10 10 < P < 500 0.125 < P < 10 10 < P < 500 0.125 < P < 10 10 < P < 500
Target energy efficiency
Efficiency grade (N)
target = 2.74. ln(P) 6.33 + N
40
target = 0.78. ln(P) 1.88 + N
target = 2.74 . ln(P) 6.33 + N
58
target = 0.78 . ln(P) 1.88 + N
target = 2.74 . ln(P) 6.33 + N
44
target = 0.78 . ln(P) 1.88 + N
target = 2.74 . ln(P) 6.33 + N
49
target = 0.78 . ln(P) 1.88 + N
target = 4.56 . ln(P) 10.5 + N
62
target = 1.1 . ln(P) 2.6 + N
target = 4.56 . ln(P) 10.5 + N
61
target = 1.1 . ln(P) 2.6 + N
target = 4.56 . ln(P) 10.5 + N
64
target = 1.1 . ln(P) 2.6 + N
target = 4.56 . ln(P) 10.5 + N
50
target = 1.1 . ln(P) 2.6 + N
target = 4.56 . ln(P) 10.5 + N
62
target = 1.1 . ln(P) 2.6 + N
target = 1.14 . ln(P) 2.6 + N
21
target = N
Fans in scope of this regulation must have the following information visibly displayed in the technical documentation of the fan (in the order as below) and at a free access manufacturer's website:
1. overall efficiency (), rounded to 1 decimal place, 2. measurement category used to determine the energy efficiency (A-D), 3. efficiency category (static or total), 4. efficiency grade at optimum energy efficiency point, 5. whether the calculation of fan efficiency assumed use of a variable speed drive (VSD) and if so, whether
the VSD is integrated within the fan or the VSD must be installed with the fan, 6. year of manufacture, 7. manufacturer's name or trademark, commercial registration number and place of manufacturer, 8. product's model number, 9. the rated motor power input(s) (kW), flow rate(s) and pressure(s) at optimum energy efficiency,
PN 46G3772 Page 122 of 197 EC J85151 13MAY05
EC 899569 04NOV93 EC G32590 08FEB06
EC 899773 07DEC94 EC L04925B 11JAN07
EC F15040 25AUG97 EC L04925M 01AUG07
EC F73298 02SEP99 EC L04925N 19FEB08
EC F74336 05SEP00 EC L05962X 08AUG08
EC F72950 23JAN02 EC L79598 25FEB09
EC H64064 13MAY03 EC N24534E 02OCT09
EC H17205 29JUL03 EC L79598A 22FEB10
EC L79598B 22SEPT10
EC L79598C 27APR2011
EC L79598D 6SEPT2011
EC N31517Y 26MAR2012
ECN31946T 19APR2013
ECN33076 5DEC2013
ECN33076A 16MAY2014
ECN46883 17OCT2014
ECP02692 26MAY2015
ECO P02838 15OCT2015
ECOP17505 21APR2016
ECO P17633 1OCT2016
ECOP17764 20MAR2017
ECOP17905 16OCT2017
ECOP17958 Jan 25, 2018
ECOP44540 June 11, 2018
ECOP44680 Mar 5, 2019
ECOP44794 Aug 9, 2019
ECO P44877 15Feb2020
ECO P45188 1Sept2020
ECO P45272 9Mar2021
ECO P45379 18Oct2021
ECO 45443 4April2022
ECO P45475 14Nov2022
This document is the property of IBM. Its use is authorized only for responding to a request for quotation or for the performance of work for IBM. All questions must be referred to the IBM Procurement Department requesting the quotation or performance of work.
Engineering Specification
Page 123 of 197
10. rotations per minute at the optimum energy efficiency point, 11. the `specific ratio', 12. information relevant for facilitating disassembly, recycling or disposal at end-of-life, 13. information relevant to minimize impact on the environment and ensure optimal life expectancy as regards
installation, use and maintenance of the fan, and 14. Description of additional items used when determining the fan energy efficiency such as ducts that are not
described in the measurement category and not supplied with the fan.
A copy of the technical documentation must be provided to IBM.
Information from numbers 1, 2, 3, 4, and 5 above, must be durably marked on or near the rating plate of the fan. For number 5, the following forms of words must be used where applicable:
1. `A variable speed drive must be installed with this fan' 2. `A variable speed drive is integrated within the fan'.
Manufacturers will provide information in the manual of instruction on specific precautions to be taken when fans are assembled, installed or maintained. If number 5 above indicates that a VSD must be installed with the fan, manufacturers must provide details on the characteristics of the VSD to ensure optimal use.
Fans in scope of this regulation and in conformance must bear the CE mark, as shown in Annex III of Directive 2009/125/EC (example in Figure 10 of this specification). This includes the manufacturers name, address, single point of contact, product identification number, and year of manufacture. The manufacture must provide IBM a Declaration of Conformity and maintain Technical Documentation in accordance with
Annex VI of EU Directive 2009/125/EC and Jordan Technical Regulation on eco-design requirements for energy related Products JSNO 2090 and
Technical Regulation on Ecodesign Requirements for Fans JSNO 10152 Schedule 1 of Ecodesign for Energy-Related Products Regulations 2010, UKSI 2010/2617
Where a fan has a motor or variable speed drives, as defined by EU Commission Regulation 2019/1781 of 1 October 2019 laying down ecodesign requirements for electric motors and variable speed drives, the motor must meet the requirements as outlined in Section 12.2.7 in this specification for this EU regulation. Note that several of the requirements are not applicable to motors completely integrated into a product.
2.12.10 Modems
Requirements for Korea Definitions Modem Modulator-demodulator. Device with nameplate output power of power supply less than or equal to 150W, that enables data transmission from computers or terminals of communication devices over cable lines. The application scope is limited to external modems with their own power supply device, separated from computer or communication terminals.
Requirements The manufacturer of the modem shall provide IBM with a test report issued by one of the designated testing institutes in Annex IV of the regulation (e.g., Korea Testing Certification, Korea Electric Testing Institute, Korea Electrotechnology Research Institute, Telecommunications Technology Association) in order for IBM to submit Form A (found in the regulation) along with the issued test report to the Korea Energy Management Corporation (KEMCO).
Modems must be labeled according to Annex V of the Korean Regulation on Standby Power Reduction Program with a warning logo if they do not meet the requirements in the following table:
Low Power Mode Performance Requirements
Category
Standby Power mode (W)
xDSL Modem
<2.0W
Off mode(W) < 0.75W
PN 46G3772 Page 123 of 197 EC J85151 13MAY05
EC 899569 04NOV93 EC G32590 08FEB06
EC 899773 07DEC94 EC L04925B 11JAN07
EC F15040 25AUG97 EC L04925M 01AUG07
EC F73298 02SEP99 EC L04925N 19FEB08
EC F74336 05SEP00 EC L05962X 08AUG08
EC F72950 23JAN02 EC L79598 25FEB09
EC H64064 13MAY03 EC N24534E 02OCT09
EC H17205 29JUL03 EC L79598A 22FEB10
EC L79598B 22SEPT10
EC L79598C 27APR2011
EC L79598D 6SEPT2011
EC N31517Y 26MAR2012
ECN31946T 19APR2013
ECN33076 5DEC2013
ECN33076A 16MAY2014
ECN46883 17OCT2014
ECP02692 26MAY2015
ECO P02838 15OCT2015
ECOP17505 21APR2016
ECO P17633 1OCT2016
ECOP17764 20MAR2017
ECOP17905 16OCT2017
ECOP17958 Jan 25, 2018
ECOP44540 June 11, 2018
ECOP44680 Mar 5, 2019
ECOP44794 Aug 9, 2019
ECO P44877 15Feb2020
ECO P45188 1Sept2020
ECO P45272 9Mar2021
ECO P45379 18Oct2021
ECO 45443 4April2022
ECO P45475 14Nov2022
This document is the property of IBM. Its use is authorized only for responding to a request for quotation or for the performance of work for IBM. All questions must be referred to the IBM Procurement Department requesting the quotation or performance of work.
Engineering Specification
Page 124 of 197
Cable Modem
<5.0W
< 0.75W
Peripheral device (excluding basic Allowable Standby Power mode (W)
Off mode(W)
Modem components)
Multi-port Modem
<1.0W
-
Wireless LAN AP
<5.0W
-
Figure 9 has an example warning logo. The minimum diameter of the logo is 2.5cm. The logo is to be labeled on the
front or top side of the product or the nameplate of the product where it is visually easy to find. The logo may be
monochrome, the predominant color of the product's surface, or in the colors suggested by the Korean e-Standby
Regulation.
Requirements for the EU and other jurisdictions as applicable References EU Regulation 1275/2008 for ecodesign requirements for standby and off mode electric power consumption of electrical and electronic household and office equipment EU Commission Regulation No 801/2013 of 22 August 2013 amending Regulation (EC) No 1275/2008 with regard to ecodesign requirements for standby, off mode electric power consumption of electrical and electronic household and office equipment EU Directive 2009/125/EC of the European Parliament and of the Council of 21 October 2009 establishing a framework for the setting of ecodesign requirements for energy-related products Israel Energy Sources (Maximum Electric Power in Standby Mode for Home and Office Appliances), 5771-2011 Regulations Jordan JSNO 2090/2013 Technical Regulation on eco-design requirements for energy related products Jordan JSNO 2109/2013 Technical Regulation on eco-design requirements for standby and off mode electric power consumption of electrical and electronic household and office equipment Turkey: Ecodesign Requirements for Standby, Off and Networked Standby Mode Electric Power Consumption of Electrical and Electronic Household and Office Equipment, Communiqué (2008/1275/EC) (SGM: 2021/13)
Requirements See Section 2.12.14 for energy requirements for EMC Class B (in accordance with EN55022:2006+A1:2007 or EN55022:2010) equipment including modems.
2.12.11 Battery Chargers (including Battery Back-up Units and Uninterruptible Power Supplies)
Requirements for California, Oregon, Canada and British Columbia References California Energy Commission (CEC) Appliance Efficiency Regulations. California Regulatory Advisory Backup Battery Charger Systems October 31, 2018 Oregon Act relating to minimum energy efficiency standards Oregon House Bill 3025 Enrolled Relating to energy efficiency standards for battery charger systems, amending Oregon Revised Statutes (ORS) 469.229 US CFR Part 430.32 Energy and water conservation standards and their compliance dates Canada Energy Efficiency Regulations 2016, Amendment SOR/2018-201 Canada Standards Association (CSA) C381.2-17 Energy performance of battery-charging systems and uninterruptible power supplies Notice from NRCan for Energy Efficiency Regulations British Columbia Energy Efficiency Act, Standards for Small Battery Charging Systems British Columbia Regulatory Bulletin Energy Efficiency Standards Regulation Amendment March 2018 British Columbia Energy Efficiency Standards Regulation No. 14/2015 B.C. Reg. No. 35/2021 amending Energy Efficiency Standards Regulation B.C. Reg. No. 14/2015 Information in this section contains a subset of definitions and requirements that typically apply to IBM products. See regulations for additional definitions, requirements, effective dates, and updates.
PN 46G3772 Page 124 of 197 EC J85151 13MAY05
EC 899569 04NOV93 EC G32590 08FEB06
EC 899773 07DEC94 EC L04925B 11JAN07
EC F15040 25AUG97 EC L04925M 01AUG07
EC F73298 02SEP99 EC L04925N 19FEB08
EC F74336 05SEP00 EC L05962X 08AUG08
EC F72950 23JAN02 EC L79598 25FEB09
EC H64064 13MAY03 EC N24534E 02OCT09
EC H17205 29JUL03 EC L79598A 22FEB10
EC L79598B 22SEPT10
EC L79598C 27APR2011
EC L79598D 6SEPT2011
EC N31517Y 26MAR2012
ECN31946T 19APR2013
ECN33076 5DEC2013
ECN33076A 16MAY2014
ECN46883 17OCT2014
ECP02692 26MAY2015
ECO P02838 15OCT2015
ECOP17505 21APR2016
ECO P17633 1OCT2016
ECOP17764 20MAR2017
ECOP17905 16OCT2017
ECOP17958 Jan 25, 2018
ECOP44540 June 11, 2018
ECOP44680 Mar 5, 2019
ECOP44794 Aug 9, 2019
ECO P44877 15Feb2020
ECO P45188 1Sept2020
ECO P45272 9Mar2021
ECO P45379 18Oct2021
ECO 45443 4April2022
ECO P45475 14Nov2022
This document is the property of IBM. Its use is authorized only for responding to a request for quotation or for the performance of work for IBM. All questions must be referred to the IBM Procurement Department requesting the quotation or performance of work.
Engineering Specification
Page 125 of 197
Definitions (California, Oregon, British Columbia) Battery or battery pack means an assembly of one or more rechargeable cells intended to provide electrical energy to a product, and may be in one of the following forms: (a) detachable battery: a battery that is contained in a separate enclosure from the product and is intended to be removed or disconnected from the product for recharging; or (b) integral battery: a battery that is contained within the product and is not removed from the product for charging purposes. Battery backup or uninterruptible power supply charger (UPS) means a small battery charger system that is voltage and frequency dependent (VFD) and designed to provide power to an end use product in the event of a power outage, and includes a UPS as defined in IEC 62040-3 ed.2.0. Battery charger system (BCS) means a battery charger coupled with its batteries or battery chargers coupled with their batteries, which together are referred to as battery charger systems. This term covers all rechargeable batteries or devices incorporating a rechargeable battery and the chargers used with them. BCS does not include 1. BCS that are voltage independent (VI) or voltage and frequency independent (VFI) uninterruptible power supplies
(UPS) as defined by IEC 62040-3. 2. BCS that are contained completely within a larger product and that:
(a) Provide power for data storage or for continuity within volatile cache or memory systems; (b) Maintain information for system use; and (c) The battery is not capable of powering full operation of the product when AC mains power is removed. See regulations for additional inclusions and exclusions.
Small battery charger system means a battery charger system with a rated input power of 2 kW or less Large battery charger system means a battery charger system with a rated input power of more than 2 kW. Efficiency Requirements Large Battery Charger Systems manufactured on or after January 1, 2014 shall meet the performance values in:
1.Table W-1 of the CEC Appliance Energy Regulation. 2.ORS 469.233 Section 10, chapter 418, 19(a), updated 2015.
Definitions (British Columbia) Consumer battery charging system means a battery charging system, including a battery charging system built into another product, that (a) has an input capacity of less than 2 kW, and (b) is distributed primarily for personal use by individuals.
Excluded consumer battery charging systems (a) an inductive battery charging system that uses (i) less than one watt in maintenance mode, (ii) less than one watt in no-battery mode, and (iii) an average of one watt or less over the duration of the charge and maintenance mode test as determined under section 5.8 of CAN/CSA C381.2-14; (b) a battery charging system incorporated into an uninterruptible power supply system that uses no more than 0.8 + 0.0021 × Eb watts in maintenance mode; (c) a battery analyzer or battery charging system for use in medical devices and exit signs; (d) a battery charging system built into another product, if the other product is an energy device; (e) a battery charging system that relies on solar energy or winding-up as its sole source of power.
Definitions (Canada) Backup battery charger means a device that (a) is incorporated into an end-use product, including a device that is incorporated into an uninterruptible power supply or that uses an external power supply, that is designed to operate continuously using mains power; and (b) recharges a battery that is used to maintain the continuity of electrical power to the end use product such that the product can continue its full or partial operation in the event of a failure of mains power. Battery charger means a device that charges the battery of a wheelchair, golf cart, low speed vehicle or any other end-use product. It does not include any of the following: (a) a device that charges the battery of a vehicle other than a wheelchair, golf cart or low speed vehicle; (b) a device that charges the battery of a medical device;
PN 46G3772 Page 125 of 197 EC J85151 13MAY05
EC 899569 04NOV93 EC G32590 08FEB06
EC 899773 07DEC94 EC L04925B 11JAN07
EC F15040 25AUG97 EC L04925M 01AUG07
EC F73298 02SEP99 EC L04925N 19FEB08
EC F74336 05SEP00 EC L05962X 08AUG08
EC F72950 23JAN02 EC L79598 25FEB09
EC H64064 13MAY03 EC N24534E 02OCT09
EC H17205 29JUL03 EC L79598A 22FEB10
EC L79598B 22SEPT10
EC L79598C 27APR2011
EC L79598D 6SEPT2011
EC N31517Y 26MAR2012
ECN31946T 19APR2013
ECN33076 5DEC2013
ECN33076A 16MAY2014
ECN46883 17OCT2014
ECP02692 26MAY2015
ECO P02838 15OCT2015
ECOP17505 21APR2016
ECO P17633 1OCT2016
ECOP17764 20MAR2017
ECOP17905 16OCT2017
ECOP17958 Jan 25, 2018
ECOP44540 June 11, 2018
ECOP44680 Mar 5, 2019
ECOP44794 Aug 9, 2019
ECO P44877 15Feb2020
ECO P45188 1Sept2020
ECO P45272 9Mar2021
ECO P45379 18Oct2021
ECO 45443 4April2022
ECO P45475 14Nov2022
This document is the property of IBM. Its use is authorized only for responding to a request for quotation or for the performance of work for IBM. All questions must be referred to the IBM Procurement Department requesting the quotation or performance of work.
Engineering Specification
Page 126 of 197
(c) a wireless battery charger, other than a wireless battery charger that is inductive and designed for wet environments; or (d) a backup battery charger. Battery Charger is a device that charges batteries for consumer products, including battery chargers embedded in other consumer products. [Source: CSA C381.2-17 Energy Performance of battery-charging systems and uninterruptible power supplies]
Requirements Small Battery Charger Systems shall meet the performance values in Table W-2 of the CEC Appliance Energy Regulation. For specific requirements, implementation dates and exemptions, see CEC Appliance Energy Regulation Section 1605.3(w) (2) and ORS 469.233 Section 10, chapter 418, 19(b).
Battery backup and uninterruptible power supplies manufactured on or after February 1, 2013, for consumer products and January 1, 2017, for products that are not consumer products/products not sold at retail shall consume no more than 0.8+0.0021 x Eb watts in maintenance mode where Eb is the battery capacity in watt-hours.
Battery chargers in scope of these requirements must be certified in the California Energy Commission's Modernized Appliance Efficiency Database System (MAEDBS). The battery charger must be labeled with the manufacturer's name or brand name or trademark; model number; and date of manufacture, indicating year and month or smaller (e.g. week) increment. If the date is in a code that is not readily understandable to the layperson, the manufacturer shall provide IBM the code to determine the date of manufacture.
The California Energy Commission (CEC) published an advisory that some backup battery charger systems cannot be tested in accordance with the test method. This is because they are contained within larger products and neither the backup battery charger systems' electricity consumption, nor their functions and features related to battery charging, can be separated from the larger products that contain them. In these cases, design approaches to allow separate measurements of the backup battery charger systems' energy consumption (such as employing switches to isolate the battery charger systems for testing purposes) are not possible. In recognition of this, Energy Commission staff will not refer such products to the Commission's Office of Compliance Assistance and Enforcement.
For British Columbia (BC): Products manufactured on or after June 2, 2018, are exempt from the energy efficiency verification label requirement including verification by the designated tester that the product meets the efficiency standard. The label exemption allows products which are compliant with the US Department of Energy (DOE) standards to be imported into BC without additional third-party testing. The BC energy device categories (product classes) and corresponding efficiency standard (maximum Unit Energy Consumption) are aligned with the US DOE battery charger standard (10 CFR 430.32 (z)). The testing procedure for all product categories is CSA C381.2-17 which is aligned with the U.S. DOE test standard (US CFR Title 10, Part 430, Subpart B, Appendix Y).
For Canada (requirements apply to battery chargers manufactured on or after June 13, 2019): A battery charger must have a unit energy consumption (UEC) that is less than or equal to that set out for the battery charger's product class in Table C.1 of CSA C381.2-17. Canada has adopted the definition for battery chargers as listed in CSA C381.2-17. See definition above.
Information, as listed in the Canada Energy Regulation must be submitted to the respective Canadian minister a.its product class; b.its rated battery energy (E), expressed in watt-hours; c.its unit energy consumption expressed in kilowatt-hours per year; d.its power, expressed in watts, when it is in active mode, maintenance mode and standby mode, respectively; and e. if an external power supply was used to test the battery charger, the power supply's model number and the name
of its manufacturer
Documentation Proof of manufacturer statement of compliance filed with the CEC must be given to IBM prior to product shipment.
Marking
PN 46G3772 Page 126 of 197 EC J85151 13MAY05
EC 899569 04NOV93 EC G32590 08FEB06
EC 899773 07DEC94 EC L04925B 11JAN07
EC F15040 25AUG97 EC L04925M 01AUG07
EC F73298 02SEP99 EC L04925N 19FEB08
EC F74336 05SEP00 EC L05962X 08AUG08
EC F72950 23JAN02 EC L79598 25FEB09
EC H64064 13MAY03 EC N24534E 02OCT09
EC H17205 29JUL03 EC L79598A 22FEB10
EC L79598B 22SEPT10
EC L79598C 27APR2011
EC L79598D 6SEPT2011
EC N31517Y 26MAR2012
ECN31946T 19APR2013
ECN33076 5DEC2013
ECN33076A 16MAY2014
ECN46883 17OCT2014
ECP02692 26MAY2015
ECO P02838 15OCT2015
ECOP17505 21APR2016
ECO P17633 1OCT2016
ECOP17764 20MAR2017
ECOP17905 16OCT2017
ECOP17958 Jan 25, 2018
ECOP44540 June 11, 2018
ECOP44680 Mar 5, 2019
ECOP44794 Aug 9, 2019
ECO P44877 15Feb2020
ECO P45188 1Sept2020
ECO P45272 9Mar2021
ECO P45379 18Oct2021
ECO 45443 4April2022
ECO P45475 14Nov2022
This document is the property of IBM. Its use is authorized only for responding to a request for quotation or for the performance of work for IBM. All questions must be referred to the IBM Procurement Department requesting the quotation or performance of work.
Engineering Specification
Page 127 of 197
Each battery charger system must be marked with a "BC" inside a circle to meet California requirements. The marking shall be legible and permanently affixed to: (A) the product nameplate that houses the battery charging terminals or; (B) the retail packaging and, if included, the cover page of the instructions.
Examples of the compliance label:
For Canada, battery chargers must bear an energy efficiency verification mark from a certification body accredited for energy efficiency verification by the Standards Council of Canada.
Requirements for Battery Chargers for USA References US 10 CFR Part 430 Energy Conservation Standards for Battery Chargers See regulations for additional definitions, requirements, effective dates, and updates.
Definitions Battery charger means a device that charges batteries for consumer products, including battery chargers embedded in other consumer products. Consumer product means any article (other than an automobile, as defined in Section 501(1) of the Motor Vehicle Information and Cost Savings Act): (1) Of a type--
(i) Which in operation consumes, or is designed to consume, energy or, with respect to showerheads, faucets, water closets, and urinals, water; and (ii) Which, to any significant extent, is distributed in commerce for personal use or consumption by individuals; (2) Without regard to whether such article of such type is in fact distributed in commerce for personal use or consumption by an individual, except that such term includes fluorescent lamp ballasts, general service fluorescent lamps, incandescent reflector lamps, showerheads, faucets, water closets, and urinals distributed in commerce for personal or commercial use or consumption.
Requirements Battery chargers manufactured on or after June 13, 2018, must have a unit energy consumption (UEC) less than or equal to the prescribed ``Maximum UEC'' standard when using the equations for the appropriate product class and corresponding rated battery energy as shown in the following table:
PN 46G3772 Page 127 of 197 EC J85151 13MAY05
EC 899569 04NOV93 EC G32590 08FEB06
EC 899773 07DEC94 EC L04925B 11JAN07
EC F15040 25AUG97 EC L04925M 01AUG07
EC F73298 02SEP99 EC L04925N 19FEB08
EC F74336 05SEP00 EC L05962X 08AUG08
EC F72950 23JAN02 EC L79598 25FEB09
EC H64064 13MAY03 EC N24534E 02OCT09
EC H17205 29JUL03 EC L79598A 22FEB10
EC L79598B 22SEPT10
EC L79598C 27APR2011
EC L79598D 6SEPT2011
EC N31517Y 26MAR2012
ECN31946T 19APR2013
ECN33076 5DEC2013
ECN33076A 16MAY2014
ECN46883 17OCT2014
ECP02692 26MAY2015
ECO P02838 15OCT2015
ECOP17505 21APR2016
ECO P17633 1OCT2016
ECOP17764 20MAR2017
ECOP17905 16OCT2017
ECOP17958 Jan 25, 2018
ECOP44540 June 11, 2018
ECOP44680 Mar 5, 2019
ECOP44794 Aug 9, 2019
ECO P44877 15Feb2020
ECO P45188 1Sept2020
ECO P45272 9Mar2021
ECO P45379 18Oct2021
ECO 45443 4April2022
ECO P45475 14Nov2022
This document is the property of IBM. Its use is authorized only for responding to a request for quotation or for the performance of work for IBM. All questions must be referred to the IBM Procurement Department requesting the quotation or performance of work.
Engineering Specification
Page 128 of 197
A battery charger if it is a device that requires Federal Food and Drug Administration (FDA) listing and approval as a life-sustaining or life supporting device in accordance with section 513 of the Federal Food, Drug, and Cosmetic Act (21 U.S.C. 360(c)) is not required to meet these requirements.
Requirements for Uninterruptible Power Supplies for Colorado and Washington References Colorado Revised Statutes Article 7.5 Water and Energy Efficiency Standards Washington An Act relating to appliance efficiency standards US 10 CFR Part 430 Subpart B Appendix Y Uniform Test Method for Measuring the Energy Consumption of Battery Chargers US 10 CFR Part 430 Energy Conservation Standards for Uninterruptible Power Supplies (prepublication final rule) See regulations for additional definitions, requirements, effective dates, and updates.
Definitions Uninterruptible Power Supply (UPS) means a battery charger consisting of a combination of convertors, switches and energy storage devices (such as batteries), constituting a power system for maintaining continuity of load power in case of input power failure. Voltage and frequency dependent UPS or VFD UPS means a UPS that produces an AC output where the output voltage and frequency are dependent on the input voltage and frequency. This UPS architecture does not provide corrective functions like those in voltage independent and voltage and frequency independent systems. Voltage and frequency independent UPS or VFI UPS means a UPS where the device remains in normal mode producing an AC output voltage and frequency that is independent of input voltage and frequency variations and protects the load against adverse effects from such variations without depleting the stored energy source. Voltage independent UPS or VI UPS means a UPS that produces an AC output within a specific tolerance band that is independent of under-voltage or over-voltage variations in the input voltage without depleting the stored energy source. The output frequency of a VI UPS is dependent on the input frequency, similar to a voltage and frequency dependent system.
Requirements UPSs that utilize a National Electrical Manufacturer Association (NEMA) 1-15P or 5-15P input plug and have an AC output shall have an average load adjusted efficiency that meets or exceeds the values shown in the table below based on the rated output power (Prated) of the UPS, as measured in accordance with test procedures prescribed in Appendix Y to Subpart B of Part 430 of Title 10 of the Code of Federal Regulations "Uniform Test Method for Measuring the Energy Consumption of Battery Chargers" in effect as of January 11, 2017.
PN 46G3772 Page 128 of 197 EC J85151 13MAY05
EC 899569 04NOV93 EC G32590 08FEB06
EC 899773 07DEC94 EC L04925B 11JAN07
EC F15040 25AUG97 EC L04925M 01AUG07
EC F73298 02SEP99 EC L04925N 19FEB08
EC F74336 05SEP00 EC L05962X 08AUG08
EC F72950 23JAN02 EC L79598 25FEB09
EC H64064 13MAY03 EC N24534E 02OCT09
EC H17205 29JUL03 EC L79598A 22FEB10
EC L79598B 22SEPT10
EC L79598C 27APR2011
EC L79598D 6SEPT2011
EC N31517Y 26MAR2012
ECN31946T 19APR2013
ECN33076 5DEC2013
ECN33076A 16MAY2014
ECN46883 17OCT2014
ECP02692 26MAY2015
ECO P02838 15OCT2015
ECOP17505 21APR2016
ECO P17633 1OCT2016
ECOP17764 20MAR2017
ECOP17905 16OCT2017
ECOP17958 Jan 25, 2018
ECOP44540 June 11, 2018
ECOP44680 Mar 5, 2019
ECOP44794 Aug 9, 2019
ECO P44877 15Feb2020
ECO P45188 1Sept2020
ECO P45272 9Mar2021
ECO P45379 18Oct2021
ECO 45443 4April2022
ECO P45475 14Nov2022
This document is the property of IBM. Its use is authorized only for responding to a request for quotation or for the performance of work for IBM. All questions must be referred to the IBM Procurement Department requesting the quotation or performance of work.
Engineering Specification
Page 129 of 197
Requirements for Uninterruptible Power Supplies for the US References US CFR Part 430.32 Energy and water conservation standards and their compliance dates
Requirements Uninterruptible power supplies (UPS) manufactured on and after January 10, 2022, that utilize a NEMA 115P or 515P input plug and have an AC output shall have an average load adjusted efficiency that meets or exceeds the values shown in the table below based on the rated output power (Prated) of the UPS.
2.12.12 Computers, Small Scale Servers, Servers, Storage Products, and peripherals
Requirements for Australia and New Zealand References Australia Greenhouse and Energy Minimum Standards Act 2012 Australia Greenhouse and Energy Minimum Standards (Computers) Determination 2013 AS/NZS 5813.1 - Information technology equipment Energy performance of computers Part 1: Methods of measurement of energy performance. AS/NZS 5813.2 Information technology equipment Energy performance of computers Part 2: Minimum energy performance standards (MEPS) for computers. Additional details are located at: https://www.energyrating.gov.au/
Definitions Computer means a device which performs logical operations and processes data and which, at a minimum, is composed of a central processing unit to perform operations; support for user input devices such as a keyboard, mouse, digitizer or game controller; and an integrated display screen or the ability to support an external display screen to output information or both. This includes desktop computers, integrated desktop computers, notebook computers, tablet computers, and small-scale servers which are designed to be connected to 230 or 240 volts mains voltage via: (a) A direct connection; or (b) An external power supply permanently connected to the product; or (c) An external power supply that can be disconnected from the product.
PN 46G3772 Page 129 of 197 EC J85151 13MAY05
EC 899569 04NOV93 EC G32590 08FEB06
EC 899773 07DEC94 EC L04925B 11JAN07
EC F15040 25AUG97 EC L04925M 01AUG07
EC F73298 02SEP99 EC L04925N 19FEB08
EC F74336 05SEP00 EC L05962X 08AUG08
EC F72950 23JAN02 EC L79598 25FEB09
EC H64064 13MAY03 EC N24534E 02OCT09
EC H17205 29JUL03 EC L79598A 22FEB10
EC L79598B 22SEPT10
EC L79598C 27APR2011
EC L79598D 6SEPT2011
EC N31517Y 26MAR2012
ECN31946T 19APR2013
ECN33076 5DEC2013
ECN33076A 16MAY2014
ECN46883 17OCT2014
ECP02692 26MAY2015
ECO P02838 15OCT2015
ECOP17505 21APR2016
ECO P17633 1OCT2016
ECOP17764 20MAR2017
ECOP17905 16OCT2017
ECOP17958 Jan 25, 2018
ECOP44540 June 11, 2018
ECOP44680 Mar 5, 2019
ECOP44794 Aug 9, 2019
ECO P44877 15Feb2020
ECO P45188 1Sept2020
ECO P45272 9Mar2021
ECO P45379 18Oct2021
ECO 45443 4April2022
ECO P45475 14Nov2022
This document is the property of IBM. Its use is authorized only for responding to a request for quotation or for the performance of work for IBM. All questions must be referred to the IBM Procurement Department requesting the quotation or performance of work.
Engineering Specification
Page 130 of 197
Products not covered by this requirement include hand-held computing devices, game consoles, handheld gaming devices, blade personal computers, workstations, mobile workstations, computer servers that are not small-scale servers, slate computers, thin client computers, and high-end Category D computers (which include computers with four or more physical processor cores; and a discrete GPU greater than or equal to category G5 with a data width greater than or equal to 192 bits; and system memory greater than or equal to 6 gigabytes; and greater than or equal to two channels of memory; and greater than or equal to 2 PICEs slot single-ended points of x8 or x16 configuration; and a power supply unit of greater than or equal to 500W nameplate output rating. Small-scale server is a computer which is designed to be a storage host for other computers; is marketed for home or small office use; uses a desktop computer form factor and includes all data processing, storage and network components in the one form factor; is designed to be operational at all times and to have little or no unscheduled downtime; and is capable of operating in a simultaneous multi-user environment serving several users through networked client units.
Requirements Computers must comply with the Minimum Energy Performance Standards (MEPS) as set out in AS/NZS 5813.1 and 5813.2 and be tested in accordance with these standards. These computers must be registered in Australia and New Zealand.
Requirements for the EU and other CE Marking jurisdictions References EU Commission Regulation No 617/2013 of 26 June 2013 implementing Directive 2009/125/EC of the European Parliament and of the Council with regard to ecodesign requirements for computers and computer servers (Note: These requirements are no longer in effect for computer servers for the European Union.) EU Directive 2009/125/EC of the European Parliament and of the Council of 21 October 2009 establishing a framework for the setting of ecodesign requirements for energy-related products EU Guidelines accompanying Commission Regulation (EU) No 617/2013 June 2014 Ukraine Approving Technical Regulation on ecodesign requirements for computers and computer servers, Resolution No. 737, 2019 Turkey: Ecodesign Requirements for Computers and Computer Servers, Communiqué (617/2013/EU) (SGM: 2021/14) United Kingdom Ecodesign for Energy-Related Products and Energy Information (Amendment) (EU Exit) Regulations 2019(S.I. 2019/539) United Kingdom Ecodesign for Energy-Related Products and Energy Information (Amendment) (EU Exit) Regulations 2020, SI 2020/1528 United Kingdom Ecodesign for Energy-Related Products Regulations 2010, SI 2010/2617 Israel: Energy Sources Law, 1989 - Amendment - (on import of energy efficient electrical appliances compliant with EU Declaration of Conformity), Law, November 2021
Definitions Computer servers: a computing product that provides services and manages networked resources for client devices, such as desktop computers, notebooks computers, desktop thin clients, internet protocol (IP) telephones, or other computer servers. A computer server is typically placed on the market for use in data centers and office/corporate environments. A computer server is primarily accessed via network connections, and not through direct user input devices such as a keyboard or a mouse. A computer server has the following characteristics: a. is a designed to support computer server operating systems (OS) and/or hypervisors, and targeted to run user-
installed enterprise applications; b. supports error-correcting code (ECC) and/or buffered memory (including both buffered dual in-line memory
modules (DIMMS) and buffered on board (BOB) configurations) c. is placed on the market with one or more AC-DC power supplies d. All processors have access to shared system memory and are independently visible to a single OS hypervisor. Small-scale server: a type of computer that typically uses desktop computer components in a desktop form factor but is designed primarily to be a storage host for other computers and to perform functions such as providing network infrastructure services and hosting data/ media, and which has the following characteristics:
PN 46G3772 Page 130 of 197 EC J85151 13MAY05
EC 899569 04NOV93 EC G32590 08FEB06
EC 899773 07DEC94 EC L04925B 11JAN07
EC F15040 25AUG97 EC L04925M 01AUG07
EC F73298 02SEP99 EC L04925N 19FEB08
EC F74336 05SEP00 EC L05962X 08AUG08
EC F72950 23JAN02 EC L79598 25FEB09
EC H64064 13MAY03 EC N24534E 02OCT09
EC H17205 29JUL03 EC L79598A 22FEB10
EC L79598B 22SEPT10
EC L79598C 27APR2011
EC L79598D 6SEPT2011
EC N31517Y 26MAR2012
ECN31946T 19APR2013
ECN33076 5DEC2013
ECN33076A 16MAY2014
ECN46883 17OCT2014
ECP02692 26MAY2015
ECO P02838 15OCT2015
ECOP17505 21APR2016
ECO P17633 1OCT2016
ECOP17764 20MAR2017
ECOP17905 16OCT2017
ECOP17958 Jan 25, 2018
ECOP44540 June 11, 2018
ECOP44680 Mar 5, 2019
ECOP44794 Aug 9, 2019
ECO P44877 15Feb2020
ECO P45188 1Sept2020
ECO P45272 9Mar2021
ECO P45379 18Oct2021
ECO 45443 4April2022
ECO P45475 14Nov2022
This document is the property of IBM. Its use is authorized only for responding to a request for quotation or for the performance of work for IBM. All questions must be referred to the IBM Procurement Department requesting the quotation or performance of work.
Engineering Specification
Page 131 of 197
(a) Is designed in a pedestal, tower, or other form factor similar to those of desktop computers such that all data processing, storage, and network interfacing is contained within one box; (b) Is designed to be operational 24 hours per day and 7 days per week; (c) Is primarily designed to operate in a simultaneous multi-user environment serving several users through networked client units; (d) Where placed on the market with an operating system, the operating system is designed for home server or lowend server applications; (e) Is not placed on the market with a discrete graphics card (dGfx) meeting any classification other than G1;
The Regulation shall not apply to control units which are not designed and not sold to be used as standalone or terminal computers, but are designed to be incorporated into or to be permanently connected to industrial machines/products/solutions. An example includes computer integrated into medical equipment, is not in scope of the Regulation, unless it is a computer without specific customization and just bundled with the medical equipment. Another example includes Notebook-computers and similar mobile devices with special cases, sold for configuring and diagnosing industrial machines and equipped for that purpose with special non standardized computer interfaces and cards for industrial field buses, for measurement or analysis, acquisition cards, software configurations customized by a vendor, etc. and these are not in scope of this EU Regulation.
See EU Regulation No 617/2013, Turkey Ecodesign Regulation, United Kingdom SI 2019/539 and Ukraine Technical Regulation with regard to ecodesign requirements for computers and computer servers and the accompanying Guidelines for additional definitions and information.
This Regulation shall apply to the following product that can be powered directly from the mains alternating current (AC) including via an external or internal power supply: (a) Desktop computers; (b) Integrated desktop computers ; (c) Notebook computers (including tablet computers, slate computers and mobile thin clients) ; (d) Desktop thin clients; (e) Workstations; (f) Mobile workstations: (g) Small-scale servers; (h) Computer servers. This Regulation shall not apply to the following product groups: (a) Blade system and components; (b) Server appliances ; (c) Multi-node servers ; (d) Computer servers with more than four processor sockets; (Note: These requirements are no longer in effect for computer servers for the European Union, but are still in effect for the Ukraine and Turkey Regulations.) (e) Game consoles; (f) Docking stations.
Requirements
Beginning February 21, 2023 (Ukraine), computer server power supplies must meet the following efficiency
requirements. These requirements are similar to 80Plus Silver. These requirements are no longer in effect for
computer servers for the European Union, United Kingdom, and Turkey, but are still in effect for the Ukraine
regulations.
Single Output AC-
<500W
500W - 1000W
>1000W
DC power supply
Load
Efficiency
Power Factor
Efficiency
Power Factor Efficiency Power Factor
10%
70%
-
75%
0.65
80%
0.8
20%
82%
0.8
85%
0.8
88%
0.9
50%
89%
0.9
89%
0.9
92%
0.9
100%
85%
0.95
85%
0.95
88%
0.95
PN 46G3772 Page 131 of 197 EC J85151 13MAY05
EC 899569 04NOV93 EC G32590 08FEB06
EC 899773 07DEC94 EC L04925B 11JAN07
EC F15040 25AUG97 EC L04925M 01AUG07
EC F73298 02SEP99 EC L04925N 19FEB08
EC F74336 05SEP00 EC L05962X 08AUG08
EC F72950 23JAN02 EC L79598 25FEB09
EC H64064 13MAY03 EC N24534E 02OCT09
EC H17205 29JUL03 EC L79598A 22FEB10
EC L79598B 22SEPT10
EC L79598C 27APR2011
EC L79598D 6SEPT2011
EC N31517Y 26MAR2012
ECN31946T 19APR2013
ECN33076 5DEC2013
ECN33076A 16MAY2014
ECN46883 17OCT2014
ECP02692 26MAY2015
ECO P02838 15OCT2015
ECOP17505 21APR2016
ECO P17633 1OCT2016
ECOP17764 20MAR2017
ECOP17905 16OCT2017
ECOP17958 Jan 25, 2018
ECOP44540 June 11, 2018
ECOP44680 Mar 5, 2019
ECOP44794 Aug 9, 2019
ECO P44877 15Feb2020
ECO P45188 1Sept2020
ECO P45272 9Mar2021
ECO P45379 18Oct2021
ECO 45443 4April2022
ECO P45475 14Nov2022
This document is the property of IBM. Its use is authorized only for responding to a request for quotation or for the performance of work for IBM. All questions must be referred to the IBM Procurement Department requesting the quotation or performance of work.
Engineering Specification
Page 132 of 197
Multi-output (AC-DC) power supplies shall not perform at less than: (a) 85% efficiency at 50 % of rated output; (b) 82% efficiency at 20 % and 100 % of rated output, and
(a) Power factor 0.8 at 20 % of rated output; (b) Power factor 0.9 at 50 % of rated output; (c) Power factor 0.95 at 100 % of rated output.
Additionally, beginning February 21, 2021 (Ukraine), the following information will need to be provided by the manufacturer and publicly available on a free-access website: (Note: These requirements are no longer in effect for computer servers for the European Union, United Kingdom and Turkey but are still in effect for the Ukraine Regulations.)
a. Product type (such as computer server); b. manufacturer's name and address at which they can be contacted; c. product model number; d. year of manufacture; e. internal/external power supply efficiency; f. test parameters for measurements:
test voltage in V and frequency in Hz, total harmonic distortion of the electricity supply system, Information and documentation on the instruments, set-up and circuits used for electrical testing.
g. maximum power (Watts); h. idle state power (Watts); i. sleep mode power (Watts); j. off mode power (Watts); k. noise levels (the declared A-weighted sound power level of the computer); l. The measurement methodology used to determine information mentioned in points (e) to (k).
If a product model is placed on the market in multiple configurations the product information required above may be reported once per product category, for the highest power-demanding configuration available within that product category. A list of all model configurations that are represented by the model for which the information is reported shall be included in the information provided.
Computer servers shall be labeled in accordance with CE marking requirements in EU Directive 2009/125/EC of the European Parliament and of the Council of 21 October 2009 establishing a framework for the setting of ecodesign requirements for energy-related products. This marking includes the CE mark (minimum height of 5mm), manufacturer's name, single point of contact, and date of manufacture in a human readable format. An EC Declaration of Conformity must be provided to IBM by the manufacturer of the computer server in accordance to the above Directive. The manufacturer must maintain the Technical Documentation per the requirements in the above Directive.
Requirements for British Columbia, California, Colorado, Hawaii, Oregon, Vermont, and Washington References British Columbia Energy Efficiency Standards Regulation No. 14/2015 B.C. Reg. No. 35/2021 amending Energy Efficiency Standards Regulation B.C. Reg. No. 14/2015 California Appliance Efficiency (CEC) Regulations Appliance Efficiency Rulemaking for Computers, Computer Monitors, and Signage Displays. Regulation and details are located at: http://www.energy.ca.gov/ Colorado Revised Statutes Article 7.5 Water and Energy Efficiency Standards Hawaii: Adoption of Water and Energy Efficiency Standards, House Bill 556, Act 141, 2019 Oregon: State-Regulated Appliance Efficiency Standards, OAR 330-092, Amendment (on efficiency standards, product definitions, conformance and certification), Final Rule, OAR 330-92-010-020, August 2020 Vermont: Energy Efficiency Standards For Appliances, 9 V.S.A. 2791 -2798 - Amendment - (on standards for electronics, lighting and water appliances), House Bill 410, Act 139, 2018
PN 46G3772 Page 132 of 197 EC J85151 13MAY05
EC 899569 04NOV93 EC G32590 08FEB06
EC 899773 07DEC94 EC L04925B 11JAN07
EC F15040 25AUG97 EC L04925M 01AUG07
EC F73298 02SEP99 EC L04925N 19FEB08
EC F74336 05SEP00 EC L05962X 08AUG08
EC F72950 23JAN02 EC L79598 25FEB09
EC H64064 13MAY03 EC N24534E 02OCT09
EC H17205 29JUL03 EC L79598A 22FEB10
EC L79598B 22SEPT10
EC L79598C 27APR2011
EC L79598D 6SEPT2011
EC N31517Y 26MAR2012
ECN31946T 19APR2013
ECN33076 5DEC2013
ECN33076A 16MAY2014
ECN46883 17OCT2014
ECP02692 26MAY2015
ECO P02838 15OCT2015
ECOP17505 21APR2016
ECO P17633 1OCT2016
ECOP17764 20MAR2017
ECOP17905 16OCT2017
ECOP17958 Jan 25, 2018
ECOP44540 June 11, 2018
ECOP44680 Mar 5, 2019
ECOP44794 Aug 9, 2019
ECO P44877 15Feb2020
ECO P45188 1Sept2020
ECO P45272 9Mar2021
ECO P45379 18Oct2021
ECO 45443 4April2022
ECO P45475 14Nov2022
This document is the property of IBM. Its use is authorized only for responding to a request for quotation or for the performance of work for IBM. All questions must be referred to the IBM Procurement Department requesting the quotation or performance of work.
Engineering Specification
Page 133 of 197
Washington Appliance Efficiency Standards Chapter 286 Laws of 2019
Definitions Computer means a device that performs logical operations and processes data. A computer includes both stationary and portable units and includes a desktop computer, a portable all-in-one, a notebook computer, a mobile gaming system, a high expandability computer, a small-scale server, a thin client, and a workstation. Although a computer is capable of using input devices and displays, such devices are not required to be included with the computer when the computer is shipped. A computer is composed of, at a minimum: (1) A central processing unit (CPU) to perform operations or, if no CPU is present, then the device must function as a client gateway to a server and the server acts as a computational CPU; (2) Ability to support user input devices such as a keyboard, mouse, or touchpad; and (3) An integrated display screen or the ability to support an external display screen to output information. The term "computer" does not include a tablet, a game console, a television, a small computer device, a server other than a small-scale server, or an industrial computer. Industrial computer means any of the following: (1) A process controller that is designed specifically to automate an industrial, medical, or laboratory process. (2) A computer that is integrated into the chassis of industrial, medical, or laboratory equipment that contains more than a computer, and that is designed specifically to perform logical operations and process data for an industrial, medical, or laboratory product using product-specific software. Small-scale server means a computer that uses desktop components in a desktop form factor but that is designed to be a storage host for other computers. A small-scale server is designed to perform functions such as providing network infrastructure services (for example, archiving) and hosting data and media. This product is not designed to process information for other systems or run Web servers as a primary function. A small-scale server has all the following characteristics: (1) Designed in a pedestal, tower, or other form factor similar to those of desktop computers such that all data processing, storage, and network interfacing is contained within one box or product; (2) Designed to operate continuously, except for maintenance; (3) Capable of operating in a simultaneous multi-user environment serving several users through networked client units; and (4) Designed for an industry-accepted operating system for home or low-end server applications (e.g., Windows Home Server, Mac OS X Server, Linux, UNIX, Solaris). See the CEC Regulations for additional definitions and details.
Requirements Desktop computers, thin clients, mobile gaming systems, portable all-in-ones, and notebook (laptop) computers manufactured on or after January 1, 2019, shall: (A) Comply with Table V-7 in the California Appliance Efficiency Regulations; and (B) Be shipped with power management settings that do both of the following:
1. Transition the computer into either the computer sleep mode or computer off mode within 30 minutes of User inactivity. If the transition is to a computer sleep mode, that sleep mode shall either:
i. Be a computer sleep mode as described in ACPI as S3; or ii. Consume power less than or equal to the values shown in Table V-6. 2. Transition connected displays into sleep mode within 15 minutes of user inactivity. (C) If the model is shipped at the purchaser's request with either a limited capability operating system or without an operating system, or if the model is not capable of having an operating system, the model is not required to comply with (B) above. (D) Desktop computers and thin clients assembled before July 1, 2021, entirely from parts manufactured before September 1, 2018 are not required to comply with (A) above.
Small-scale servers, high expandability computers, mobile workstations, and workstations manufactured on or after January 1, 2018, shall:
PN 46G3772 Page 133 of 197 EC J85151 13MAY05
EC 899569 04NOV93 EC G32590 08FEB06
EC 899773 07DEC94 EC L04925B 11JAN07
EC F15040 25AUG97 EC L04925M 01AUG07
EC F73298 02SEP99 EC L04925N 19FEB08
EC F74336 05SEP00 EC L05962X 08AUG08
EC F72950 23JAN02 EC L79598 25FEB09
EC H64064 13MAY03 EC N24534E 02OCT09
EC H17205 29JUL03 EC L79598A 22FEB10
EC L79598B 22SEPT10
EC L79598C 27APR2011
EC L79598D 6SEPT2011
EC N31517Y 26MAR2012
ECN31946T 19APR2013
ECN33076 5DEC2013
ECN33076A 16MAY2014
ECN46883 17OCT2014
ECP02692 26MAY2015
ECO P02838 15OCT2015
ECOP17505 21APR2016
ECO P17633 1OCT2016
ECOP17764 20MAR2017
ECOP17905 16OCT2017
ECOP17958 Jan 25, 2018
ECOP44540 June 11, 2018
ECOP44680 Mar 5, 2019
ECOP44794 Aug 9, 2019
ECO P44877 15Feb2020
ECO P45188 1Sept2020
ECO P45272 9Mar2021
ECO P45379 18Oct2021
ECO 45443 4April2022
ECO P45475 14Nov2022
This document is the property of IBM. Its use is authorized only for responding to a request for quotation or for the performance of work for IBM. All questions must be referred to the IBM Procurement Department requesting the quotation or performance of work.
Engineering Specification
Page 134 of 197
(A) Be powered by an internal power supply that meets or exceeds the standards in Table V-9 in the California Appliance Efficiency Regulations, or an external power supply that meets the level VI of efficiency described in the International Efficiency Marking Protocol for External Power Supplies Version 3.0 (Sept. 2013); (B) Incorporate Energy-Efficient Ethernet functionality; (C) Transition connected displays into sleep mode within 15 minutes of user inactivity; and (D) Transition the computer into either the computer sleep mode or computer off mode within 30 minutes of user inactivity. If the transition is to a computer sleep mode, that sleep mode shall either:
1. Be a computer sleep mode as described in ACPI as S3; or 2. Consume power less than or equal to the values shown in Table V-6. Small-scale servers and rack-mounted workstations are not required to comply with (D) above.
These products must be labeled with the manufacturer's name, model number and date of manufacture. Manufacturers of these products must file a statement and applicable data with the State of California for each of the above products sold or offered for sale in California.
See California Appliance Efficiency (CEC) Regulations Appliance Efficiency Rulemaking for Computers, Computer Monitors, and Signage Displays for additional definitions, test methods and details.
Note: California enforcement dates precede those of British Columbia, Colorado, Hawaii, Oregon, Vermont, and Washington.
Additional Requirements for Original Equipment Manufacturer (OEM) designed servers with an IBM logo References ENERGY STAR® Program Requirements for Computer Servers Version 2.1 at https://www.energystar.gov/products/spec/enterprise_servers_specification_version_2_1_pd 80 PLUS® performance specification American Society of Heating, Refrigerating, and Air-conditioning Engineers (ASHRAE) Thermal Guidelines for Data Processing Environments, 3rd Edition. National Sanitation Foundation International Standard/ American National Standard NSF/ANSI 426-2017 Environmental Leadership and Corporate Social Responsibility Assessment of Servers
Definitions
Computer server: Hardware system providing services and manage networked resources for client devices (e.g.,
desktop computers, notebook computers, thin clients, wireless devices, PDAs, IP telephones, other computer servers
or other network devices). The definition of computer server aligns with ENERGY STAR Program Requirements
for Computer Servers 2.1. A computer server:
- Is sold through enterprise channels for use in data centers and office/corporate environments;
- Is primarily accessed via network connections, versus directly-connected user input devices such as a keyboard or
mouse;
- Is marketed and sold as a computer server;
- Is designed for and listed as supporting one or more computer server operating systems (OS) and, or hypervisors;
- Is targeted to run user-installed applications typically, but not exclusively, enterprise in nature;
- Provides support for error-correcting code (ECC) and, or buffered memory (including both buffered dual in-line
memory modules (DIMMs) and buffered on board (BOB) configurations);
- Is packaged and sold with one or more AC-DC or DC-DC power supplies; and
- Is designed such that all processors have access to shared system memory and are visible to a single OS or
hypervisor.
The following products are excluded from the requirements in this section:
- Fully Fault Tolerant Servers,
- Server Appliances,
- High Performance Computing Systems,
- Large Servers,
- Storage Products including Blade Storage, and
- Network Equipment.
PN 46G3772 Page 134 of 197 EC J85151 13MAY05
EC 899569 04NOV93 EC G32590 08FEB06
EC 899773 07DEC94 EC L04925B 11JAN07
EC F15040 25AUG97 EC L04925M 01AUG07
EC F73298 02SEP99 EC L04925N 19FEB08
EC F74336 05SEP00 EC L05962X 08AUG08
EC F72950 23JAN02 EC L79598 25FEB09
EC H64064 13MAY03 EC N24534E 02OCT09
EC H17205 29JUL03 EC L79598A 22FEB10
EC L79598B 22SEPT10
EC L79598C 27APR2011
EC L79598D 6SEPT2011
EC N31517Y 26MAR2012
ECN31946T 19APR2013
ECN33076 5DEC2013
ECN33076A 16MAY2014
ECN46883 17OCT2014
ECP02692 26MAY2015
ECO P02838 15OCT2015
ECOP17505 21APR2016
ECO P17633 1OCT2016
ECOP17764 20MAR2017
ECOP17905 16OCT2017
ECOP17958 Jan 25, 2018
ECOP44540 June 11, 2018
ECOP44680 Mar 5, 2019
ECOP44794 Aug 9, 2019
ECO P44877 15Feb2020
ECO P45188 1Sept2020
ECO P45272 9Mar2021
ECO P45379 18Oct2021
ECO 45443 4April2022
ECO P45475 14Nov2022
This document is the property of IBM. Its use is authorized only for responding to a request for quotation or for the performance of work for IBM. All questions must be referred to the IBM Procurement Department requesting the quotation or performance of work.
Engineering Specification
Page 135 of 197
See ENERGY STAR Program Requirements for Computer Servers Version 2.1 for definitions of the above product types.
Server Appliance: A computer server that is bundled with a pre-installed OS and application software that is used to perform a dedicated function or set of tightly coupled functions. Server appliances deliver services through one or more networks (e.g., IP or SAN), and are typically managed through a web or command line interface. Server appliance hardware and software configurations are customized by the vendor to perform a specific task (e.g., name services, firewall services, authentication services, encryption services, and voice-over-IP (VoIP) services), and are not intended to execute user-supplied software.
Requirements Computer servers designed by an OEM which will have an IBM logo, or a logo owned by IBM must design the product to conform to the latest level of the ENERGY STAR® Program Requirements for Computer Servers. As of the time of publication of this specification the latest level is Version 2.1. Note: Server Appliances are exempt from this requirement.
The power supplies in the product must be rated through the 80 Plus program and listed in the 80 Plus Program and on the 80 Plus® website http://www.plugloadsolutions.com/80PlusPowerSupplies.aspx. A test report from an independent, third-party laboratory demonstrating conformance with 80 PLUS® Gold requirements or higher is required.
2.12.13 Removed
2.12.14 EMC Class B Equipment
Requirements for the EU and other jurisdictions References EU Regulation 1275/2008 for ecodesign requirements for standby and off mode electric power consumption of electrical and electronic household and office equipment EU Commission Regulation No 801/2013 of 22 August 2013 amending Regulation (EC) No 1275/2008 with regard to ecodesign requirements for standby, off mode electric power consumption of electrical and electronic household and office equipment, EU Regulation 2019/2021 laying down ecodesign requirements for electronic displays pursuant to Directive 2009/125/EC, amending Commission Regulation No 1275/2008. EU Directive 2009/125/EC of the European Parliament and of the Council of 21 October 2009 establishing a framework for the setting of ecodesign requirements for energy-related products EU Guidelines accompanying Commission Regulation (EU) No 617/2013 June 2014 Israel Energy Sources (Maximum Electric Power in Standby Mode for Home and Office Appliances), 5771-2011 Regulations Jordan JSNO 2090/2013 Technical Regulation on eco-design requirements for energy related products Jordan JSNO 2109/2013 Technical Regulation on eco-design requirements for standby and off mode electric power consumption of electrical and electronic household and office equipment Turkey: Ecodesign Requirements for Standby, Off and Networked Standby Mode Electric Power Consumption of Electrical and Electronic Household and Office Equipment, Communiqué (2008/1275/EC) (SGM: 2021/13)
See each regulation above for more details and definitions.
This section applies to Energy Related Products (ERP) including information technology equipment intended primarily for use in the domestic environment, but excluding desktop computers, integrated desktop computers and notebook computers as defined in Commission Regulation (EU) No 617/2013, as well as electronic displays covered by Regulation (EU) 2019/2021. Products in Annex I of the regulation include information technology equipment intended primarily for use in the domestic environment which means products classified as EMC Class B per EN 55022:2010 and EN 55032:2012 in EU Directive 2014/30/EU Electromagnetic Compatibility (EMC).
PN 46G3772 Page 135 of 197 EC J85151 13MAY05
EC 899569 04NOV93 EC G32590 08FEB06
EC 899773 07DEC94 EC L04925B 11JAN07
EC F15040 25AUG97 EC L04925M 01AUG07
EC F73298 02SEP99 EC L04925N 19FEB08
EC F74336 05SEP00 EC L05962X 08AUG08
EC F72950 23JAN02 EC L79598 25FEB09
EC H64064 13MAY03 EC N24534E 02OCT09
EC H17205 29JUL03 EC L79598A 22FEB10
EC L79598B 22SEPT10
EC L79598C 27APR2011
EC L79598D 6SEPT2011
EC N31517Y 26MAR2012
ECN31946T 19APR2013
ECN33076 5DEC2013
ECN33076A 16MAY2014
ECN46883 17OCT2014
ECP02692 26MAY2015
ECO P02838 15OCT2015
ECOP17505 21APR2016
ECO P17633 1OCT2016
ECOP17764 20MAR2017
ECOP17905 16OCT2017
ECOP17958 Jan 25, 2018
ECOP44540 June 11, 2018
ECOP44680 Mar 5, 2019
ECOP44794 Aug 9, 2019
ECO P44877 15Feb2020
ECO P45188 1Sept2020
ECO P45272 9Mar2021
ECO P45379 18Oct2021
ECO 45443 4April2022
ECO P45475 14Nov2022
This document is the property of IBM. Its use is authorized only for responding to a request for quotation or for the performance of work for IBM. All questions must be referred to the IBM Procurement Department requesting the quotation or performance of work.
Engineering Specification
Page 136 of 197
This regulation excludes desktop computers, integrated desktop computers and notebook computers as defined in EU Regulation 617/2013 (see Annex I of EU Regulation No 1275/2008 and amendment in Article 4 of EU Regulation 617/2013) and Class B equipment placed on the market with a low voltage external power supply (nameplate output voltage of less than 6 volts and a nameplate output current greater than or equal to 550 milliamperes) to work as intended (EPSs are regulated by EU Regulation (EC) No 278/2009 Ecodesign requirements for no-load condition electric power consumption and average active efficiency of external power supplies).
Definitions Electrical and electronic household and office equipment - means any energy-using product which: 1.is made commercially available as a single functional unit and is intended for the end-user; 2.falls under the list of energy-using products of Annex I (in EU Regulation (EC) No 1275/2008); 3.is dependent on energy input from the mains power source in order to work as intended; and 4.Is designed for use with a nominal voltage rating of 250 V or below. Networked equipment means equipment that can connect to a network and has one or more network ports. Networked equipment with high network availability (HiNA equipment) means equipment with one or more of the following functionalities, but no other, as the main function(s): router, network switch, wireless network access point, hub, modem, VoIP telephone, video phone. Networked equipment with high network availability (HiNA) functionality means equipment with the functionality of a router, network switch, wireless network access point or combination thereof included, but not being HiNA equipment. Router means a network device whose primary function is to determine the optimal path along which network traffic should be forwarded. Routers forward packets from one network to another, based on network layer information (L3). Network switch means a network device whose primary function is to filter, forward and distribute frames based on the destination address of each frame. All switches operate at least at the data link layer (L2).
For a complete list of definitions, please refer to the EU Regulation and Guideline documents cited above.
Desktop computers, integrated desktop computers and notebook computers are excluded from the scope of the Commission Regulation (EC) No.1275/2008.
For this regulation, the terms `router' and `switch' do not apply to products mounted in a rack for use in a data center.
Requirements Electrical and electronic household and office equipment must meet the requirements related to standby and off mode, and networked standby, electric power consumption as stated in Annex II of EU Regulation 1275/2008 for ecodesign requirements for standby and off mode electric power consumption of electrical and electronic household and office equipment (consolidated to Jan 9, 2017). This Regulation shall not apply to electrical and electronic household and office equipment placed on the market with a low voltage external power supply to work as intended.
See the EU Regulation for more details, definitions and requirements.
Electronic equipment, such as monitors, workstations and laptops which are EMC Class B Information Technology equipment as defined in EN 55022:2006+A1:2007 or EN 55022:2010 and newly releasing must meet the following requirements: 1. Power consumption in off-mode shall not exceed 0.50 W, 2. Power consumption in standby mode with a reactivation function shall not exceed 0.50 W, 3. Power consumption in standby mode providing only information or status display shall not exceed 1.00 W, and 4. When equipment is not providing the main function, or when other energy-using product(s) are not dependent
on its functions, equipment shall, unless inappropriate for the intended use, offer a power management function that switches equipment after the shortest possible period of time into standby mode, or off mode, or another condition which does not exceed the applicable power consumption requirements for off mode and/or standby
PN 46G3772 Page 136 of 197 EC J85151 13MAY05
EC 899569 04NOV93 EC G32590 08FEB06
EC 899773 07DEC94 EC L04925B 11JAN07
EC F15040 25AUG97 EC L04925M 01AUG07
EC F73298 02SEP99 EC L04925N 19FEB08
EC F74336 05SEP00 EC L05962X 08AUG08
EC F72950 23JAN02 EC L79598 25FEB09
EC H64064 13MAY03 EC N24534E 02OCT09
EC H17205 29JUL03 EC L79598A 22FEB10
EC L79598B 22SEPT10
EC L79598C 27APR2011
EC L79598D 6SEPT2011
EC N31517Y 26MAR2012
ECN31946T 19APR2013
ECN33076 5DEC2013
ECN33076A 16MAY2014
ECN46883 17OCT2014
ECP02692 26MAY2015
ECO P02838 15OCT2015
ECOP17505 21APR2016
ECO P17633 1OCT2016
ECOP17764 20MAR2017
ECOP17905 16OCT2017
ECOP17958 Jan 25, 2018
ECOP44540 June 11, 2018
ECOP44680 Mar 5, 2019
ECOP44794 Aug 9, 2019
ECO P44877 15Feb2020
ECO P45188 1Sept2020
ECO P45272 9Mar2021
ECO P45379 18Oct2021
ECO 45443 4April2022
ECO P45475 14Nov2022
This document is the property of IBM. Its use is authorized only for responding to a request for quotation or for the performance of work for IBM. All questions must be referred to the IBM Procurement Department requesting the quotation or performance of work.
Engineering Specification
Page 137 of 197
mode when the equipment is connected to the mains power supply. The power management function shall be activated before delivery to IBM.
In addition, as of January 1, 2015, 1.Any Class B networked equipment shall offer a power management function, unless the Class B networked
equipment is intended for data center use. 2.Specifically, any Class B HiNA equipment or equipment with HiNA functionality's power consumption in a
condition providing networked standby into which the equipment is switched by the power management function shall not exceed 12W.
As of January 1, 2017, those pieces of equipment that apply to the requirements of Jan 1 2015 above must also 1.comply with the standby requirements when all wired network ports are disconnected and when all wireless
network ports are deactivated 2.any equipment with HiNA functionality in networked standby shall not exceed 8W 3.all other networked equipment networked standby power shall not exceed 3W.
As of 1 January 2019, the power consumption of networked equipment other than HiNA equipment or other than equipment with HiNA functionality, in a condition providing networked standby into which the equipment is switched by the power management function, or a similar function, shall not exceed 2.00 W.
Labeling and Documentation The product must be marked with the CE conformity marking. See example in the following Figure. The CE mark must have a height of at least 5 mm. The CE marking must be affixed to the ERP. Where this is not possible, it must be affixed to the packaging and to the accompanying documents.
Figure 10. Example of CE conformity marking.
The following technical documents must be provided to IBM: A.Declaration of Conformity (DoC) to EU Regulation 1275/2008 in accordance with Annex VI of EU Directive 2009/125/EC of 21 October 2009 establishing a framework for the setting of ecodesign requirements for energyrelated products and a Declaration of Conformity for compliance with Jordan JSNO 2090/2013 Technical Regulation on eco-design requirements for energy related products and Jordan JSNO 2109/2013 Technical Regulation on eco-design requirements for standby and off mode electric power consumption of electrical and electronic household and office equipment. The DoC must include:
i. Name and address of the manufacturer or of its authorized representative; ii. A description of the model sufficient for unambiguous identification; iii. Where appropriate, the references of the harmonized standards applied; iv. Where appropriate, the other technical standards and specifications used; v. Where appropriate, the reference to other EU Community legislation providing for the affixing of the CE
mark that is applied; and vi. Identification and signature of the person empowered to bind the manufacturer or its authorized
representative. B.Statement indicating which energy efficiency tier (or both) the DoC applies to (see the first two paragraphs of this section for energy efficiency tier information), and C.The technical documentation showing efficiency data must be provided. The technical documentation must meet the requirements of Annex IV of EU Commission Regulation No 1275/2008. The above DoC and technical documentation must be provided in English, and other available languages such as Romanian, Turkish and Hebrew.
As of Jan 1, 2015, the following information for networked equipment shall be visibly displayed on the
manufacturer's website:
PN 46G3772 Page 137 of 197 EC J85151 13MAY05
EC 899569 04NOV93 EC G32590 08FEB06
EC 899773 07DEC94 EC L04925B 11JAN07
EC F15040 25AUG97 EC L04925M 01AUG07
EC F73298 02SEP99 EC L04925N 19FEB08
EC F74336 05SEP00 EC L05962X 08AUG08
EC F72950 23JAN02 EC L79598 25FEB09
EC H64064 13MAY03 EC N24534E 02OCT09
EC H17205 29JUL03 EC L79598A 22FEB10
EC L79598B 22SEPT10
EC L79598C 27APR2011
EC L79598D 6SEPT2011
EC N31517Y 26MAR2012
ECN31946T 19APR2013
ECN33076 5DEC2013
ECN33076A 16MAY2014
ECN46883 17OCT2014
ECP02692 26MAY2015
ECO P02838 15OCT2015
ECOP17505 21APR2016
ECO P17633 1OCT2016
ECOP17764 20MAR2017
ECOP17905 16OCT2017
ECOP17958 Jan 25, 2018
ECOP44540 June 11, 2018
ECOP44680 Mar 5, 2019
ECOP44794 Aug 9, 2019
ECO P44877 15Feb2020
ECO P45188 1Sept2020
ECO P45272 9Mar2021
ECO P45379 18Oct2021
ECO 45443 4April2022
ECO P45475 14Nov2022
This document is the property of IBM. Its use is authorized only for responding to a request for quotation or for the performance of work for IBM. All questions must be referred to the IBM Procurement Department requesting the quotation or performance of work.
Engineering Specification
Page 138 of 197
for each standby and/or off mode and the condition providing networked standby into which the equipment is switched by the power management function or similar function
the power consumption data in Watts rounded to the first decimal place the period of time after which the power management function, or a similar function, switches the
equipment automatically into standby and/or off mode and/or the conditions providing networked standby the power consumption of the product in networked standby if all wired network ports are connected and all wireless network ports are activated guidance on how to activate and deactivate wireless network ports
2.12.15Desktop computers
Requirements for British Columbia, California, Colorado and Washington References California Appliance Efficiency (CEC) Regulations Appliance Efficiency Rulemaking for Computers, Computer Monitors, and Signage Displays. Regulation and details are located at: http://www.energy.ca.gov/ Colorado Revised Statutes Article 7.5 Water and Energy Efficiency Standards Washington Appliance Efficiency Standards Chapter 286 Laws of 2019 British Columbia Energy Efficiency Standards Regulation, 14/2015 B.C. Reg. 35/2021 amending Energy Efficiency Standards Regulation B.C. Reg. 14/2015
Definitions (British Columbia) Computer means a stationary or portable device that performs logical operations and processes data and, at a minimum, has the following components: (a) a CPU or the ability to function as a client gateway to a server that acts as a computational CPU; (b) the ability to support a keyboard, mouse, touchpad or other user input device, whether or not the device is included with the computer when the computer is shipped; (c) an integrated display screen or the ability to support an external display screen to output information, whether or not an external display screen is included with the computer when the computer is shipped. For the purpose of the definition of "computer", the following are excluded: (a) a game console; (b) an industrial computer; (c) a server, other than small-scale server; (d) a small computer device; (e) a small-volume computer model; (f) a tablet; (g) a television Desktop computer means a computer, including an integrated desktop computer, that has a main unit that is designed to be in a fixed location, but does not include any of the following as defined in British Columbia Energy Efficiency Standards Regulation, 14/2015: (a) a high-expandability computer; (b) a small-scale server; (c) a workstation.
Requirements (British Columbia) Desktop computers manufactured on or after July 1, 2021, shall meet the efficiency values in the table listed under section 54, and the power management settings under section 60 of Division 2 of Part 9 of B.C. Reg No. 14/2015. An energy efficiency verification label is not required if the product is listed in California Energy Commission Modernized Appliance Efficiency Database System. For specific definitions, requirements, implementation dates and exemptions, see Part 9 of B.C. Reg No. 14/2015.
Definitions (California, Washington, Colorado)
PN 46G3772 Page 138 of 197 EC J85151 13MAY05
EC 899569 04NOV93 EC G32590 08FEB06
EC 899773 07DEC94 EC L04925B 11JAN07
EC F15040 25AUG97 EC L04925M 01AUG07
EC F73298 02SEP99 EC L04925N 19FEB08
EC F74336 05SEP00 EC L05962X 08AUG08
EC F72950 23JAN02 EC L79598 25FEB09
EC H64064 13MAY03 EC N24534E 02OCT09
EC H17205 29JUL03 EC L79598A 22FEB10
EC L79598B 22SEPT10
EC L79598C 27APR2011
EC L79598D 6SEPT2011
EC N31517Y 26MAR2012
ECN31946T 19APR2013
ECN33076 5DEC2013
ECN33076A 16MAY2014
ECN46883 17OCT2014
ECP02692 26MAY2015
ECO P02838 15OCT2015
ECOP17505 21APR2016
ECO P17633 1OCT2016
ECOP17764 20MAR2017
ECOP17905 16OCT2017
ECOP17958 Jan 25, 2018
ECOP44540 June 11, 2018
ECOP44680 Mar 5, 2019
ECOP44794 Aug 9, 2019
ECO P44877 15Feb2020
ECO P45188 1Sept2020
ECO P45272 9Mar2021
ECO P45379 18Oct2021
ECO 45443 4April2022
ECO P45475 14Nov2022
This document is the property of IBM. Its use is authorized only for responding to a request for quotation or for the performance of work for IBM. All questions must be referred to the IBM Procurement Department requesting the quotation or performance of work.
Engineering Specification
Page 139 of 197
Desktop computer means a computer whose main unit is designed to be located in a fixed location, often on a desk or on the floor. A desktop computer includes an integrated desktop computer. A workstation, a high expandability computer, or a small-scale server is not a desktop computer
Requirements (California, Washington, Colorado) See section 2.12.12 for requirements.
Requirements for Mexico Reference Mexico Catalog of the Equipment and Apparatus for which the manufacturers, importers, distributors and sellers should provide information about power consumption and forms for providing information
Requirements Desktop computers must have a label, in Spanish, with the following information: Power Consumption by unit of time in operation; The type of energy or power used, which should indicate the measurement units, unless by its operational nature,
the type of power or energy is evidently identifiable, in which case it will not be necessary to include this requirement on the labeling; Quantity of the good, product or service offered by the equipment per unit of energy consumed when applicable.
The manufacturer must submit the forms found in the Mexico Catalog of the Equipment and Apparatus for which the manufacturers, importers, distributors and sellers should provide information about power consumption and forms for providing information to the Mexico National Commission for Efficient Energy Use (CONUEE). A copy of this form must be supplied to IBM.
2.12.16 Servers and Data Storage Products
Requirements for the EU References EU Regulation 2019/424 laying down ecodesign requirements for servers and data storage products. Turkey: Ecodesign Requirements for Servers and Data Storage Products, Communiqué (2019/424/EU) (SGM: 2021/15) EU Regulation 2021/341 of 23 February 2021 amending Regulations (EU) 2019/424, (EU) 2019/1781, (EU) 2019/2019, (EU) 2019/2020, (EU) 2019/2021, (EU) 2019/2022, (EU) 2019/2023 and (EU) 2019/2024 with regard to ecodesign requirements for servers and data storage products, electric motors and variable speed drives, refrigerating appliances, light sources and separate control gears, electronic displays, household dishwashers, household washing machines and household washer-dryers and refrigerating appliances with a direct sales function United Kingdom Ecodesign for Energy-Related Products and Energy Information (Amendment) (EU Exit) Regulations 2020 SI 2020/1528United Kingdom Ecodesign for Energy-Related Products Regulations 2010, SI 2010/2617 EN 303 470:2019 Energy Efficiency measurement methodology and metrics for servers. Generalized Test Protocol for Calculating the Energy Efficiency of Internal AC-DC and DC-DC Power Supplies (80 Plus program EPRI and Ecova). Guidelines for Media Sanitation NIST Special Publication 800-88. EN 45558:2019 General Method to declare the use of critical raw materials in energy-related products.
This regulation does not apply to the following products:
(a) Servers intended for embedded applications;
(b) Servers classified as small scale servers in terms of Regulation (EU) No 617/2013; (c) Servers with more than four processor sockets; (d) Server appliances; (e) Large servers; (f) Fully fault tolerant servers;
PN 46G3772 Page 139 of 197 EC J85151 13MAY05
EC 899569 04NOV93 EC G32590 08FEB06
EC 899773 07DEC94 EC L04925B 11JAN07
EC F15040 25AUG97 EC L04925M 01AUG07
EC F73298 02SEP99 EC L04925N 19FEB08
EC F74336 05SEP00 EC L05962X 08AUG08
EC F72950 23JAN02 EC L79598 25FEB09
EC H64064 13MAY03 EC N24534E 02OCT09
EC H17205 29JUL03 EC L79598A 22FEB10
EC L79598B 22SEPT10
EC L79598C 27APR2011
EC L79598D 6SEPT2011
EC N31517Y 26MAR2012
ECN31946T 19APR2013
ECN33076 5DEC2013
ECN33076A 16MAY2014
ECN46883 17OCT2014
ECP02692 26MAY2015
ECO P02838 15OCT2015
ECOP17505 21APR2016
ECO P17633 1OCT2016
ECOP17764 20MAR2017
ECOP17905 16OCT2017
ECOP17958 Jan 25, 2018
ECOP44540 June 11, 2018
ECOP44680 Mar 5, 2019
ECOP44794 Aug 9, 2019
ECO P44877 15Feb2020
ECO P45188 1Sept2020
ECO P45272 9Mar2021
ECO P45379 18Oct2021
ECO 45443 4April2022
ECO P45475 14Nov2022
This document is the property of IBM. Its use is authorized only for responding to a request for quotation or for the performance of work for IBM. All questions must be referred to the IBM Procurement Department requesting the quotation or performance of work.
Engineering Specification
Page 140 of 197
(g) Network servers; (h) Small data storage products; (i) Large data storage products.
Definitions Server - means a computing product that provides services and manages networked resources for client devices, such as desktop computers, notebook computers, desktop thin clients, internet protocol telephones, smart phones, tablets, telecommunication, automated systems or other servers primarily accessed via network connections, and not through direct user input devices, such as a keyboard or a mouse and with the following characteristics: (a) Is designed to support server operating systems (OS) and/or hypervisors, and targeted to run user-installed enterprise applications; (b) Supports error-correcting code (ECC) and/or buffered memory (including both buffered dual in-line memory modules (DIMMs) and buffered on board (BOB) configurations); (c) All processors have access to shared system memory and are independently visible to a single OS or hypervisor. Data storage product - means a fully-functional storage system that supplies data storage services to clients and devices attached directly or through a network. Components and subsystems that are an integral part of the data storage product architecture (e.g., to provide internal communications between controllers and disks) are considered to be part of the data storage product. In contrast, components that are normally associated with a storage environment at the data center level (e.g. devices required for operation of an external storage area network) are not considered to be part of the data storage product. A data storage product may be composed of integrated storage controllers, data storage devices, embedded network elements, software, and other devices. Auxiliary Processing Accelerator (APA) means a specialized processor and associated subsystem that provide an increase in computing capacity such as graphical processing units or field programmable gate arrays. An APA cannot operate in a server without a CPU. APAs can be installed in a server either on Graphics or Extension add-in cards installed in general-purpose add-in expansion slots or integrated into a server component such as the motherboard; Blade server means a server that is designed for use in a blade chassis. A blade server is a high-density device that functions as an independent server and includes at least one processor and system memory, but is dependent upon shared blade chassis resources (e.g., power supply units, cooling) for operation. A processor or memory module will not be considered a blade server when the technical documentation for the product does not indicate that it scales up a standalone server. High Performance Computing (HPC) server means a server which is designed and optimized to execute highly parallel applications, for higher performance computing or deep learning artificial intelligence applications. HPC servers must meet all the following criteria: (a) They consist of multiple computing nodes, clustered primarily to increase computational capability; (b) They include high speed inter-processing interconnections between nodes. Direct current server means a server that is designed solely to operate on a DC power source. Direct current data storage product means a data storage product that is designed solely to operate on a DC power source. Online data storage product means a data storage product designed for online, random-access of data, accessible in a random or sequential pattern, with a maximum time to first data of an online data storage product less than 80 milliseconds. Small data storage product means a data storage product containing a maximum of three data storage devices. Large data storage product means a high end or mainframe data storage product that supports more than 400 data storage devices in its maximum configuration and with the following required attributes: no single point of failure, non-disruptive serviceability and integrated storage controller. Server appliance means a server that is not intended to execute user-supplied software, delivers services through one or more networks, is typically managed through a web or command line interface and is bundled with a preinstalled OS and application software that is used to perform a dedicated function or set of tightly coupled functions. Resilient server means a server designed with extensive reliability, availability, serviceability and scalability features integrated in the micro architecture of the system, central processing unit (CPU) and chipset.
PN 46G3772 Page 140 of 197 EC J85151 13MAY05
EC 899569 04NOV93 EC G32590 08FEB06
EC 899773 07DEC94 EC L04925B 11JAN07
EC F15040 25AUG97 EC L04925M 01AUG07
EC F73298 02SEP99 EC L04925N 19FEB08
EC F74336 05SEP00 EC L05962X 08AUG08
EC F72950 23JAN02 EC L79598 25FEB09
EC H64064 13MAY03 EC N24534E 02OCT09
EC H17205 29JUL03 EC L79598A 22FEB10
EC L79598B 22SEPT10
EC L79598C 27APR2011
EC L79598D 6SEPT2011
EC N31517Y 26MAR2012
ECN31946T 19APR2013
ECN33076 5DEC2013
ECN33076A 16MAY2014
ECN46883 17OCT2014
ECP02692 26MAY2015
ECO P02838 15OCT2015
ECOP17505 21APR2016
ECO P17633 1OCT2016
ECOP17764 20MAR2017
ECOP17905 16OCT2017
ECOP17958 Jan 25, 2018
ECOP44540 June 11, 2018
ECOP44680 Mar 5, 2019
ECOP44794 Aug 9, 2019
ECO P44877 15Feb2020
ECO P45188 1Sept2020
ECO P45272 9Mar2021
ECO P45379 18Oct2021
ECO 45443 4April2022
ECO P45475 14Nov2022
This document is the property of IBM. Its use is authorized only for responding to a request for quotation or for the performance of work for IBM. All questions must be referred to the IBM Procurement Department requesting the quotation or performance of work.
Engineering Specification
Page 141 of 197
Large server means a resilient server which ships as a pre-integrated/pre-tested system housed in one or more full frame racks and that includes a high connectivity input/output subsystem with a minimum of 32 dedicated input/output slots. Fully fault tolerant server means a server that is designed with complete hardware redundancy (to simultaneously and repetitively run a single workload for continuous availability in mission critical applications), in which every computing component is replicated between two nodes running identical and concurrent workloads (i.e., if one node fails or needs repair, the second node can run the workload alone to avoid downtime). Network server means a network product which contains the same components as a server in addition to more than 11 network port with a total line rate throughput of 12 Gb/s or more, the capability to dynamically reconfigure ports and speed and support for a virtualized network environment through a software defined network.
Please refer to the regulation for more definitions and details.
Requirements From March 1, 2020 and March 25, 2021(Turkey), the following are requirements:
Power Supply Unit (PSU) efficiency and power factor requirements From 1 March 2020 and March 25, 2021(Turkey), for servers and online data storage products, with the exception of direct current servers and of direct current data storage products, the PSU efficiency at 10%, 20%, 50% and 100% of the rated load level and the power factor at 50% of the rated load level shall not be less than the values reported in the table below.
From 1 January 2023, for servers and online data storage products, with the exception of direct current servers and of direct current data storage products, the PSU efficiency at 10%, 20%, 50% and 100% of the rated load level and the power factor at 50% of the rated load level shall not be less than the values reported in the table below.
Idle State Power From 1 March 2020 and March 25, 2021(Turkey), the idle state power (Pidle) of servers with the exception of resilient servers, HPC servers and servers with integrated APA, shall not exceed the value calculated using the following equation: Pidle = Pbase+Padd_i Where Pbase is the basic idle state power allowance in the first Table below, and Padd_i is the sum of the idle state power allowances for applicable, additional components, as determined in the second Table below. For blade servers, Pidle is calculated as the total measured power divided by the number of installed blade servers in the tested blade chassis. For multi-node servers, the number of sockets are counted per node while Pidle is calculated as the total measured power divided by the number of installed nodes in the tested enclosure.
PN 46G3772 Page 141 of 197 EC J85151 13MAY05
EC 899569 04NOV93 EC G32590 08FEB06
EC 899773 07DEC94 EC L04925B 11JAN07
EC F15040 25AUG97 EC L04925M 01AUG07
EC F73298 02SEP99 EC L04925N 19FEB08
EC F74336 05SEP00 EC L05962X 08AUG08
EC F72950 23JAN02 EC L79598 25FEB09
EC H64064 13MAY03 EC N24534E 02OCT09
EC H17205 29JUL03 EC L79598A 22FEB10
EC L79598B 22SEPT10
EC L79598C 27APR2011
EC L79598D 6SEPT2011
EC N31517Y 26MAR2012
ECN31946T 19APR2013
ECN33076 5DEC2013
ECN33076A 16MAY2014
ECN46883 17OCT2014
ECP02692 26MAY2015
ECO P02838 15OCT2015
ECOP17505 21APR2016
ECO P17633 1OCT2016
ECOP17764 20MAR2017
ECOP17905 16OCT2017
ECOP17958 Jan 25, 2018
ECOP44540 June 11, 2018
ECOP44680 Mar 5, 2019
ECOP44794 Aug 9, 2019
ECO P44877 15Feb2020
ECO P45188 1Sept2020
ECO P45272 9Mar2021
ECO P45379 18Oct2021
ECO 45443 4April2022
ECO P45475 14Nov2022
This document is the property of IBM. Its use is authorized only for responding to a request for quotation or for the performance of work for IBM. All questions must be referred to the IBM Procurement Department requesting the quotation or performance of work.
Engineering Specification
Page 142 of 197
From 1 March 2020 and March 25, 2021(Turkey), the active state efficiency (Effserver) of servers, with the exception of resilient servers, HPC servers and servers with integrated APA, shall not be lower than the values in Table 5.
Active state efficiency requirements
Material efficiency requirements From 1 March 2020 and March 25, 2021(Turkey), manufacturers shall ensure that joining, fastening or sealing
techniques do not prevent the disassembly for repair or reuse purposes of the following components, when present:
(a) Data storage devices
(b) Memory (c) Processor (CPUs)
(d) Motherboard (e) Expansion card/graphic card (f) Power supply unit
PN 46G3772 Page 142 of 197 EC J85151 13MAY05
EC 899569 04NOV93 EC G32590 08FEB06
EC 899773 07DEC94 EC L04925B 11JAN07
EC F15040 25AUG97 EC L04925M 01AUG07
EC F73298 02SEP99 EC L04925N 19FEB08
EC F74336 05SEP00 EC L05962X 08AUG08
EC F72950 23JAN02 EC L79598 25FEB09
EC H64064 13MAY03 EC N24534E 02OCT09
EC H17205 29JUL03 EC L79598A 22FEB10
EC L79598B 22SEPT10
EC L79598C 27APR2011
EC L79598D 6SEPT2011
EC N31517Y 26MAR2012
ECN31946T 19APR2013
ECN33076 5DEC2013
ECN33076A 16MAY2014
ECN46883 17OCT2014
ECP02692 26MAY2015
ECO P02838 15OCT2015
ECOP17505 21APR2016
ECO P17633 1OCT2016
ECOP17764 20MAR2017
ECOP17905 16OCT2017
ECOP17958 Jan 25, 2018
ECOP44540 June 11, 2018
ECOP44680 Mar 5, 2019
ECOP44794 Aug 9, 2019
ECO P44877 15Feb2020
ECO P45188 1Sept2020
ECO P45272 9Mar2021
ECO P45379 18Oct2021
ECO 45443 4April2022
ECO P45475 14Nov2022
This document is the property of IBM. Its use is authorized only for responding to a request for quotation or for the performance of work for IBM. All questions must be referred to the IBM Procurement Department requesting the quotation or performance of work.
Engineering Specification
Page 143 of 197
(g) chassis (h) batteries.
From 1 March 2020 and March 25, 2021(Turkey), a functionality for secure data deletion shall be made available for the deletion of data contained in all the data storage devices of the product.
From 1 March 2021 and March 25, 2021(Turkey), the latest available version of the firmware shall be made available from two years after the placing on the market of the first product of a certain product model for a minimum period of eight years after the placing on the market of the last product of a certain product model, free of charge or at a fair, transparent and non-discriminatory cost. The latest available security update to the firmware shall be made available from the time a product model is placed on the market until at least eight years after the placing on the market of the last product of a certain product model, free of charge.
Information to be provided by manufacturers of OEM designed servers and online data storage products
From 1 March 2020 and March 25, 2021(Turkey), with the exception of custom made servers, made on a one-off
basis, the following product information on servers shall be provided in the instruction manuals for installers and
end-users (when present with the product), and on the free-access websites of manufacturers, their authorised
representatives and importers from the time a product model is placed on the market until at least eight years after
the placing on the market of the last product of a certain product model:
(1)
product type;
(2)
manufacturer's name, registered trade name and registered trade address at which they can be contacted;
(3)
product model number, and if applicable the low-end performance configuration and the high-end
performance configuration model numbers;
(4)
year of manufacture;
(5)
PSU efficiency at 10% (if applicable), 20%, 50% and 100% of rated output power, with the exception of
direct current servers, expressed in % and rounded to the first decimal place;
(6)
power factor at 50% of the rated load level, with the exception of direct current servers, rounded to three
decimal places;
(7)
PSU rated power output (Watts), rounded to the nearest integer. If a product model is part of a server
product family, all PSUs offered in a server product family shall be reported with the information
specified in (5) and (6);
(8)
idle state power expressed in Watts and rounded to the first decimal place;
(9)
list of all components for additional idle power allowances, if any (additional PSU, HDDs or SSDs,
additional memory, additional buffered DDR channels, additional I/O devices);
(10) maximum power expressed in Watts and rounded to the first decimal place;
(11) declared operating condition class;
(12) idle state power (Watts) at the higher boundary temperature of the declared operating condition class;
(13) the active state efficiency and the performance in active state of the server;
(14) information on the secure data deletion functionality, including instructions on how to use the
functionality, the techniques used and the supported secure data deletion standard(s), if any;
(15) for blade servers, a list of recommended combinations with compatible chassis;
(16) if a product model is part of a server product family, a list of all model configurations that are represented
by the model shall be supplied.
The manufacturers of OEM designed servers and online data storage products shall provide instruction on the disassembly operations for the product, including type of operation, type and number of fastening techniques to be unlocked and tools required.
From 1 March 2020 and March 25, 2021(Turkey), with the exception of custom made data storage products, made on a one-off basis, the following product information on online data storage products shall be provided in the instruction manuals for installers and end-users (when present with the product), and on the free-access websites of manufacturers, their authorised representatives and importers from the time a product model is placed on the market until at least eight years after the placing on the market of the last product of a certain product model:
PN 46G3772 Page 143 of 197 EC J85151 13MAY05
EC 899569 04NOV93 EC G32590 08FEB06
EC 899773 07DEC94 EC L04925B 11JAN07
EC F15040 25AUG97 EC L04925M 01AUG07
EC F73298 02SEP99 EC L04925N 19FEB08
EC F74336 05SEP00 EC L05962X 08AUG08
EC F72950 23JAN02 EC L79598 25FEB09
EC H64064 13MAY03 EC N24534E 02OCT09
EC H17205 29JUL03 EC L79598A 22FEB10
EC L79598B 22SEPT10
EC L79598C 27APR2011
EC L79598D 6SEPT2011
EC N31517Y 26MAR2012
ECN31946T 19APR2013
ECN33076 5DEC2013
ECN33076A 16MAY2014
ECN46883 17OCT2014
ECP02692 26MAY2015
ECO P02838 15OCT2015
ECOP17505 21APR2016
ECO P17633 1OCT2016
ECOP17764 20MAR2017
ECOP17905 16OCT2017
ECOP17958 Jan 25, 2018
ECOP44540 June 11, 2018
ECOP44680 Mar 5, 2019
ECOP44794 Aug 9, 2019
ECO P44877 15Feb2020
ECO P45188 1Sept2020
ECO P45272 9Mar2021
ECO P45379 18Oct2021
ECO 45443 4April2022
ECO P45475 14Nov2022
This document is the property of IBM. Its use is authorized only for responding to a request for quotation or for the performance of work for IBM. All questions must be referred to the IBM Procurement Department requesting the quotation or performance of work.
Engineering Specification
Page 144 of 197
(1)
product type;
(2)
manufacturer's name, registered trade name and registered trade address at which they can be contacted;
(1)
product model number,
(2)
year of manufacture;
(3)
PSU efficiency at 10% (if applicable), 20%, 50% and 100% of rated output power, with the exception of
direct current online data storage products, expressed in % and rounded to the first decimal place;
(4)
power factor at 50% of the rated load level, with the exception of direct current online data storage
products, rounded to three decimal places;
(5)
declared operating condition class; it shall also be indicated that 'This product has been tested in order to
verify that it will function within the boundaries (such as temperature and humidity) of the declared
operating condition class';
(6)
information on the data deletions tool(s), including instructions on how to use the functionality, the
techniques used and the supported secure data deletion standard(s), if any
2.12.17 Compressors
Requirements for the USA Compressors, as defined by US Code of Federal Regulations 10 CFR Part 431 Subpart T must have a Minimum Package Isentropic Efficiency as specified in 10 CFR 431.345.
Manufacturer of the compressor must supply IBM with a copy of the tested compressor's certification document as specified in 10 CFR 429.12(b)
Definitions Compressor means a machine or apparatus that converts different types of energy into the potential energy of gas pressure for displacement and compression of gaseous media to any higher pressure values above atmospheric pressure and has a pressure ratio at full-load operating pressure greater than 1.3.
For more definitions of compressors, see 10 CFR 431.342 Definitions.
Additionally, DOE regulates compressors that meet all the following requirements: (1) Is an air compressor, (2) Is a rotary compressor, (3) Is not a liquid ring compressor, (4) Is driven by a brushless electric motor, (5) Is a lubricated compressor, (6) Has a full-load operating pressure greater than or equal to 75 pounds per square inch gauge (psig) and less than or equal to 200 psig, (7) Is not designed and tested to the requirements of The American Petroleum Institute standard 619, "Rotary-Type Positive-Displacement Compressors for Petroleum, Petrochemical, and Natural Gas Industries," (8) Has full-load actual volume flow rate greater than or equal to 35 cubic feet per minute (cfm), or is distributed in commerce with a compressor motor nominal horsepower greater than or equal to 10 horsepower (hp), (9) Has a full-load actual volume flow rate less than or equal to 1,250 cfm, or is distributed in commerce with a compressor motor nominal horsepower less than or equal to 200 hp, (10) Is driven by a three-phase electric motor, (11) Is manufactured alone or as a component of another piece of equipment; and (12) Is in one of the equipment classes listed in the Table 1, must have a full-load package isentropic efficiency or part-load package isentropic efficiency that is not less than the appropriate "Minimum Package Isentropic Efficiency" value listed in Table 1 of this section.
Minimum Package Isentropic Efficiency Requirements for compressors:
PN 46G3772 Page 144 of 197 EC J85151 13MAY05
EC 899569 04NOV93 EC G32590 08FEB06
EC 899773 07DEC94 EC L04925B 11JAN07
EC F15040 25AUG97 EC L04925M 01AUG07
EC F73298 02SEP99 EC L04925N 19FEB08
EC F74336 05SEP00 EC L05962X 08AUG08
EC F72950 23JAN02 EC L79598 25FEB09
EC H64064 13MAY03 EC N24534E 02OCT09
EC H17205 29JUL03 EC L79598A 22FEB10
EC L79598B 22SEPT10
EC L79598C 27APR2011
EC L79598D 6SEPT2011
EC N31517Y 26MAR2012
ECN31946T 19APR2013
ECN33076 5DEC2013
ECN33076A 16MAY2014
ECN46883 17OCT2014
ECP02692 26MAY2015
ECO P02838 15OCT2015
ECOP17505 21APR2016
ECO P17633 1OCT2016
ECOP17764 20MAR2017
ECOP17905 16OCT2017
ECOP17958 Jan 25, 2018
ECOP44540 June 11, 2018
ECOP44680 Mar 5, 2019
ECOP44794 Aug 9, 2019
ECO P44877 15Feb2020
ECO P45188 1Sept2020
ECO P45272 9Mar2021
ECO P45379 18Oct2021
ECO 45443 4April2022
ECO P45475 14Nov2022
This document is the property of IBM. Its use is authorized only for responding to a request for quotation or for the performance of work for IBM. All questions must be referred to the IBM Procurement Department requesting the quotation or performance of work.
Engineering Specification
Page 145 of 197
The isentropic efficiency requirements take effect for any compressor manufactured in or imported into the United States on or after January 10, 2025.
Energy efficiency requirements for compressors meeting the above twelve requirements can be found in 10 CFR Part 431 Subpart T Energy Conservation Standards for Air Compressors; Final Rule
These regulations do not apply to scroll compressors.
2.13 Requirements for Product Take-Back
This section applies to Products which have a logo or brand other than IBM and are not included inside an IBM branded product. For example, this section applies to monitors and laptops, which do not have an IBM logo, but rather a vendor logo. Products, such as these, must have product take-back programs in place in the jurisdictions where required, financed, and maintained by the vendor whose logo appears on the Product. Contact your IBM representative with questions and details about applicability.
2.14 Requirements for RoHS
References (limited list of jurisdictions requiring RoHS compliance) EU Directive 2011/65/EU of the European Parliament and of the Council of 8 June 2011 on the restriction of the use of certain hazardous substances in electrical and electronic equipment (recast) and amendments. EU Decision No 768/2008/EC of the European Parliament and of the Council of 9 July 2008 on a common framework for the marketing of products. EN IEC 63000:2018 Technical Documentation for the assessment of electrical and electronic products with respect to the restriction of hazardous substances (IEC 63000:2016). Republic of Srpska Rulebook on the Restriction of the use of certain hazardous substances in electrical and electronic equipment. Eurasian Economic Commission Technical Regulation On the restriction of the use of hazardous substances in electrical and radioelectronic equipment Decision No 113 (TR EEU/037/2016). Eurasian Economic Commission Technical Regulation On the restriction of the use of hazardous substances in electrical and radioelectronic equipment List of products Decision No 167 Ukraine - On Approval of the Technical Regulations on the Restriction of the Use Certain Hazardous Substances in Electrical and Electronic Equipment #139 March 10, 2017. China Implementation Arrangements of the RoHS Conformity Assessment System for Electrical and Electronic Products May 16, 2019.
PN 46G3772 Page 145 of 197 EC J85151 13MAY05
EC 899569 04NOV93 EC G32590 08FEB06
EC 899773 07DEC94 EC L04925B 11JAN07
EC F15040 25AUG97 EC L04925M 01AUG07
EC F73298 02SEP99 EC L04925N 19FEB08
EC F74336 05SEP00 EC L05962X 08AUG08
EC F72950 23JAN02 EC L79598 25FEB09
EC H64064 13MAY03 EC N24534E 02OCT09
EC H17205 29JUL03 EC L79598A 22FEB10
EC L79598B 22SEPT10
EC L79598C 27APR2011
EC L79598D 6SEPT2011
EC N31517Y 26MAR2012
ECN31946T 19APR2013
ECN33076 5DEC2013
ECN33076A 16MAY2014
ECN46883 17OCT2014
ECP02692 26MAY2015
ECO P02838 15OCT2015
ECOP17505 21APR2016
ECO P17633 1OCT2016
ECOP17764 20MAR2017
ECOP17905 16OCT2017
ECOP17958 Jan 25, 2018
ECOP44540 June 11, 2018
ECOP44680 Mar 5, 2019
ECOP44794 Aug 9, 2019
ECO P44877 15Feb2020
ECO P45188 1Sept2020
ECO P45272 9Mar2021
ECO P45379 18Oct2021
ECO 45443 4April2022
ECO P45475 14Nov2022
This document is the property of IBM. Its use is authorized only for responding to a request for quotation or for the performance of work for IBM. All questions must be referred to the IBM Procurement Department requesting the quotation or performance of work.
Engineering Specification
Page 146 of 197
Announcement of People's Republic of China Ministry of Industry and Information Technology No. 15 (2018) Annex 1. Catalog of Electrical and Electronic Products subject to RoHS Compliance Management (Batch 1) Annex 2. List of Exceptions to RoHS Compliance Management Catalog.
Restrictions See IBM Product specifications 97P3864 for details about material restrictions, allowable finishes and exemptions. See Table 1 in this specification for additional details about material restrictions.
Definitions
Electrical and electronic equipment (EEE) means equipment which is dependent on electric currents or
electromagnetic fields in order to work properly and equipment for the generation, transfer and measurement of such
currents and fields and designed for use with a voltage rating not exceeding 1000 volts for alternating current and
1500 volts for direct current. [Source: EU Directive 2011/65/EU of the European Parliament and of the Council of 8
June 2011 on the restriction of the use of certain hazardous substances (RoHS) in electrical and electronic equipment
(recast)]
Electrical and radioelectronic equipment (products) products, qualified functioning of which is determined by
the presence, usage, production, transformation, transition and distribution of electrical currents and (or)
electromagnetic fields, which are qualified for direct use or incorporated into machines, mechanisms, apparatus,
devices and other equipment. [Source: Eurasian Economic Commission Technical Regulation On the restriction of
the use of hazardous substances in electrical and radioelectronic equipment (TR EEU/037/2016). See regulation for
a listing of applicable products.]
Finished Product, for the purposes of this specification, Finished Product means any stand alone, final assembly in
any form factor, including standalone, rack-mount and tower. Examples of stand-alone, final assemblies include, but
are not limited to:
Displays/ Monitors
Mice
Storage products
Electrical tools
Power distribution units
Switches
External storage drives
Printers
Workstations
External memory keys/flash drives Racks
Medical Devices
External modems
Routers
Uninterruptible Power Supplies
External power supplies
Servers
Keyboards
Smart Card Readers
Industrial monitoring and control instruments See definition in Section 1.2 Definitions
Manufacturer means any natural or legal person who manufactures an EEE or who has an EEE designed or
manufactured and markets it under his name or trademark. [Source: EU Directive 2011/65/EU of the European
Parliament and of the Council of 8 June 2011 on the restriction of the use of certain hazardous substances in
electrical and electronic equipment (recast)]
Medical Device See definition in Section 1.2 Definitions.
Categories of EEE covered by the EU RoHS Directive [Source: EU Directive 2011/65/EU of the European
Parliament and of the Council of 8 June 2011 on the restriction of the use of certain hazardous substances in
electrical and electronic equipment (recast)]
Category number Name of Category
1
Large household appliances
2
Small household appliances
3
Information Technology (IT) and telecommunications equipment
4
Consumer equipment
5
Lighting equipment
6
Electrical and electronic tools
7
Toys, leisure and sports equipment
8
Medical devices
9
Monitoring and control instruments including industrial monitoring and control instruments
10
Automatic dispensers
11
Other EEE not covered by any of the categories above
PN 46G3772 Page 146 of 197 EC J85151 13MAY05
EC 899569 04NOV93 EC G32590 08FEB06
EC 899773 07DEC94 EC L04925B 11JAN07
EC F15040 25AUG97 EC L04925M 01AUG07
EC F73298 02SEP99 EC L04925N 19FEB08
EC F74336 05SEP00 EC L05962X 08AUG08
EC F72950 23JAN02 EC L79598 25FEB09
EC H64064 13MAY03 EC N24534E 02OCT09
EC H17205 29JUL03 EC L79598A 22FEB10
EC L79598B 22SEPT10
EC L79598C 27APR2011
EC L79598D 6SEPT2011
EC N31517Y 26MAR2012
ECN31946T 19APR2013
ECN33076 5DEC2013
ECN33076A 16MAY2014
ECN46883 17OCT2014
ECP02692 26MAY2015
ECO P02838 15OCT2015
ECOP17505 21APR2016
ECO P17633 1OCT2016
ECOP17764 20MAR2017
ECOP17905 16OCT2017
ECOP17958 Jan 25, 2018
ECOP44540 June 11, 2018
ECOP44680 Mar 5, 2019
ECOP44794 Aug 9, 2019
ECO P44877 15Feb2020
ECO P45188 1Sept2020
ECO P45272 9Mar2021
ECO P45379 18Oct2021
ECO 45443 4April2022
ECO P45475 14Nov2022
This document is the property of IBM. Its use is authorized only for responding to a request for quotation or for the performance of work for IBM. All questions must be referred to the IBM Procurement Department requesting the quotation or performance of work.
Engineering Specification
Page 147 of 197
Examples of EEE by relevant category [Source: EU Directive 2012/19/EU of the European Parliament and of the Council of 4 July 2012 on Waste Electrical and Electronic Equipment]. This listing of examples may not be allinclusive.
Category 3. IT and telecommunications equipment Centralized data processing: Mainframes Minicomputers Printer units Personal computing: Personal computers (CPU, mouse, screen and keyboard included) Laptop computers (CPU, mouse, screen and keyboard included) Notebook computers Notepad computers Printers Copying equipment Electrical and electronic typewriters Pocket and desk calculators And other products and equipment for the collection, storage, processing, presentation or communication of information by electronic means User terminals and systems Facsimile machine (fax) Telex Telephones Pay telephones Cordless telephones Cellular telephones Answering systems and other products or equipment of transmitting sound, images or other information by telecommunications
Category 4. Consumer equipment Radio sets Television sets Video cameras Video recorders Hi-fi recorders Audio amplifiers Musical instruments and other products or equipment for the purpose of recording or reproducing sound or images, including signals or other technologies for the distribution of sound and image than by telecommunications Photovoltaic panels
Category 5. Lighting equipment Luminaires for fluorescent lamps with the exception of luminaires in households Straight fluorescent lamps Compact fluorescent lamps High intensity discharge lamps, including pressure sodium lamps and metal halide lamps Low pressure sodium lamps Other lighting or equipment for the purpose of spreading or controlling light with the exception of filament bulbs
Category 6. Electrical and electronic tools
Drills
Saws
Sewing machines
PN 46G3772 Page 147 of 197 EC J85151 13MAY05
EC 899569 04NOV93 EC G32590 08FEB06
EC 899773 07DEC94 EC L04925B 11JAN07
EC F15040 25AUG97 EC L04925M 01AUG07
EC F73298 02SEP99 EC L04925N 19FEB08
EC F74336 05SEP00 EC L05962X 08AUG08
EC F72950 23JAN02 EC L79598 25FEB09
EC H64064 13MAY03 EC N24534E 02OCT09
EC H17205 29JUL03 EC L79598A 22FEB10
EC L79598B 22SEPT10
EC L79598C 27APR2011
EC L79598D 6SEPT2011
EC N31517Y 26MAR2012
ECN31946T 19APR2013
ECN33076 5DEC2013
ECN33076A 16MAY2014
ECN46883 17OCT2014
ECP02692 26MAY2015
ECO P02838 15OCT2015
ECOP17505 21APR2016
ECO P17633 1OCT2016
ECOP17764 20MAR2017
ECOP17905 16OCT2017
ECOP17958 Jan 25, 2018
ECOP44540 June 11, 2018
ECOP44680 Mar 5, 2019
ECOP44794 Aug 9, 2019
ECO P44877 15Feb2020
ECO P45188 1Sept2020
ECO P45272 9Mar2021
ECO P45379 18Oct2021
ECO 45443 4April2022
ECO P45475 14Nov2022
This document is the property of IBM. Its use is authorized only for responding to a request for quotation or for the performance of work for IBM. All questions must be referred to the IBM Procurement Department requesting the quotation or performance of work.
Engineering Specification
Page 148 of 197
Equipment for turning, milling, sanding, grinding, sawing, cutting, shearing, drilling, making holes, punching, folding, bending or similar processing of wood, metal and other materials Tools for riveting, nailing or screwing or removing rivets, nails, screws or similar uses Tools for welding, soldering or similar use Equipment for spraying, spreading, dispersing or other treatment of liquid or gaseous substances by other means Tools for mowing or other gardening activities
Category 8. Medical devices Radiotherapy equipment Cardiology equipment Dialysis equipment Pulmonary ventilators Nuclear medicine equipment Laboratory equipment for in vitro diagnosis Analyzers Freezers Fertilization tests Other appliances for detecting, preventing, monitoring, treating, alleviating illness, injury or disability
Category 9. Monitoring and control instruments including industrial monitoring and control instruments Smoke detector Heating regulators Thermostats Measuring, weighing or adjusting appliances for household or as laboratory equipment Other monitoring and control instruments used in industrial installations (e.g. in control panels)
Requirements for Finished Products All EEE (in all Categories listed above) must meet Article 7 of EU Directive 2011/65/EU RoHS. Refer to the Directive for further details. Categories 1 to 7 and 10 are allowed to use the substances (see Table 3 of this specification for a listing of the substances) in applications listed in Annex III of the EU Directive 2011/65/EU RoHS. Categories 8 and 9 are allowed to use the substances in applications listed in both Annex III and Annex IV. Please be aware that many of these exemptions have expiration dates which have passed, and they are no longer allowed for use. IBM Engineering specification 97P3864 lists the exemptions with expiration dates as listed in the consolidated version of EU Directive 2011/65/EU RoHS and amendments available on the date of release of specification 97P3864. Please see the Directive for the latest exemptions and expiration dates.
Finished Products must meet Eurasian Economic Commission Technical Regulation On the restriction of the use of hazardous substances in electrical and radioelectronic equipment (TR EEU/037/2016), starting by year end 2018 or before as certification becomes available in-country. TR EEU/037/2016 does not apply to Measuring equipment and Medical products.
Documentation requirements for the European Union and other CE marking jurisdictions Manufacturers must have in place technical documentation as required by Article 7 and carry out the internal production control procedure in line with module A of Annex II to Decision No 768/2008/EC. Manufacturers must ensure that procedures are in place for series production to remain in conformity. Changes in product design or characteristics and changes in the harmonized standards or in technical specifications by reference to which conformity of EEE is declared shall be adequately taken into account. Technical Documentation must be in accordance with the latest version of EN IEC 63000:2018, Technical Documentation for the Assessment of Electrical and Electronic Products with Respect to the Restriction of Hazardous Substances (IEC 63000:2016).
Manufacturers must keep the technical documentation and the Declaration of Conformities (DoCs) for 10 years after the EEE has been placed on the market. This documentation must be readily available to IBM and provided within two business days upon request.
PN 46G3772 Page 148 of 197 EC J85151 13MAY05
EC 899569 04NOV93 EC G32590 08FEB06
EC 899773 07DEC94 EC L04925B 11JAN07
EC F15040 25AUG97 EC L04925M 01AUG07
EC F73298 02SEP99 EC L04925N 19FEB08
EC F74336 05SEP00 EC L05962X 08AUG08
EC F72950 23JAN02 EC L79598 25FEB09
EC H64064 13MAY03 EC N24534E 02OCT09
EC H17205 29JUL03 EC L79598A 22FEB10
EC L79598B 22SEPT10
EC L79598C 27APR2011
EC L79598D 6SEPT2011
EC N31517Y 26MAR2012
ECN31946T 19APR2013
ECN33076 5DEC2013
ECN33076A 16MAY2014
ECN46883 17OCT2014
ECP02692 26MAY2015
ECO P02838 15OCT2015
ECOP17505 21APR2016
ECO P17633 1OCT2016
ECOP17764 20MAR2017
ECOP17905 16OCT2017
ECOP17958 Jan 25, 2018
ECOP44540 June 11, 2018
ECOP44680 Mar 5, 2019
ECOP44794 Aug 9, 2019
ECO P44877 15Feb2020
ECO P45188 1Sept2020
ECO P45272 9Mar2021
ECO P45379 18Oct2021
ECO 45443 4April2022
ECO P45475 14Nov2022
This document is the property of IBM. Its use is authorized only for responding to a request for quotation or for the performance of work for IBM. All questions must be referred to the IBM Procurement Department requesting the quotation or performance of work.
Engineering Specification
Page 149 of 197
When laboratory sampling is completed and used as part of the technical documentation, the test method must be in accordance with the latest version of IEC 62321 Electrotechnical products - Determination of levels of six regulated substances (lead, mercury, cadmium, hexavalent chromium, polybrominated biphenyls, polybrominated diphenyl ethers) as referred to in EN IEC 63000:2018, Technical Documentation for the Assessment of Electrical and Electronic Products with Respect to the Restriction of Hazardous Substances (IEC 63000:2016).
Manufacturers must keep a register of non-conforming EEE and product recalls, and keep distributors, including IBM, informed thereof.
Manufacturers, when requested by a competent national authority or IBM, must provide all the information and documentation necessary to demonstrate the conformity of the EEE with the RoHS Directive, in a language which can be easily understood by the authority, and that they cooperate with the authority, at its request, on actions taken to ensure compliance with the Directive for the EEE which they have placed on the market or provided to IBM for placing on the market.
Manufacturers must draw up a DoC which must have the following: 1. It shall state that it has been demonstrated that the requirements specified in Article 4 of the EU Directive have been met as well as conformity with the Republic of Srpska Rulebook on the restriction of the use of certain hazardous substances in electrical and electronic equipment. 2. It shall have the model structure and contain the elements specified in Annex VI of the Directive and Attachment 5 of the Srpska Rulebook, including: Number, which is the unique identification of the EEE. Name and address of the manufacturer or authorized representative. Wording "This declaration of conformity is issued under the sole responsibility of the manufacturer (or
installer)". Object of the declaration (identification of EEE allowing traceability, e.g., a photograph). The object of the declaration described above is in conformity with Directive 2011/65/EU of the European Parliament and of the Council of 8 June 2011 on the restriction of the use of certain hazardous substances in electrical and electronic equipment and in conformity with the Republic of Srpska Rulebook on the restriction of the use of certain hazardous substances in electrical and electronic equipment. Where applicable, references to the relevant harmonized standards used or references to the technical specifications in relation to which conformity is declared. Signature block including:
o Signed for and on behalf of: o Place and date of issue, and o Name, function and signature.
By drawing up the EU DoC, the manufacturer shall assume responsibility for the compliance of the EEE with the EU RoHS Recast Directive. Manufacturers of Finished Products must provide IBM a DoC in as many languages as available, for example Czech and Slovenian. A single DoC must be provided which references all EU CE marking legislation applicable to the product in accordance with EU Decision 768/2008/EC on a common framework for the marketing of products, Article 5. The product name or number identifier on the product must match the name or number on the DoC and the name or number on the Technical Documentation.
The above requirements for a DoC and technical documentation also applies to other jurisdictions such as the Republic of Srpska referencing their specific decrees, regulations or laws.
Documentation requirements for the Eurasian Economic Union The manufacturer of the Finished Product shall provide IBM, upon request, a copy of the Declaration of conformity, a certification of registration, and/or a copy of the Technical Documentation. This documentation must be in Russian. The following Products in the table below require this certification. Please see Eurasian Economic Commission Decision No 167 for a full listing of products in scope of the RoHS requirements. Electronic computing machines and connected devices which are in scope of this requirement include:
PN 46G3772 Page 149 of 197 EC J85151 13MAY05
EC 899569 04NOV93 EC G32590 08FEB06
EC 899773 07DEC94 EC L04925B 11JAN07
EC F15040 25AUG97 EC L04925M 01AUG07
EC F73298 02SEP99 EC L04925N 19FEB08
EC F74336 05SEP00 EC L05962X 08AUG08
EC F72950 23JAN02 EC L79598 25FEB09
EC H64064 13MAY03 EC N24534E 02OCT09
EC H17205 29JUL03 EC L79598A 22FEB10
EC L79598B 22SEPT10
EC L79598C 27APR2011
EC L79598D 6SEPT2011
EC N31517Y 26MAR2012
ECN31946T 19APR2013
ECN33076 5DEC2013
ECN33076A 16MAY2014
ECN46883 17OCT2014
ECP02692 26MAY2015
ECO P02838 15OCT2015
ECOP17505 21APR2016
ECO P17633 1OCT2016
ECOP17764 20MAR2017
ECOP17905 16OCT2017
ECOP17958 Jan 25, 2018
ECOP44540 June 11, 2018
ECOP44680 Mar 5, 2019
ECOP44794 Aug 9, 2019
ECO P44877 15Feb2020
ECO P45188 1Sept2020
ECO P45272 9Mar2021
ECO P45379 18Oct2021
ECO 45443 4April2022
ECO P45475 14Nov2022
This document is the property of IBM. Its use is authorized only for responding to a request for quotation or for the performance of work for IBM. All questions must be referred to the IBM Procurement Department requesting the quotation or performance of work.
Engineering Specification
Page 150 of 197
Labeling requirements for the European Union and other CE marking jurisdictions The CE marking must be placed on all Finished Products, including IBM logo and non-IBM logo products. Figure 10 has an example CE Mark. The CE Mark must be at least 5 mm in height. The Manufacturer of the Finished Product must place the CE mark on the product. The CE marking shall be affixed visibly, legibly and indelibly to the finished EEE or to its data plate. Where that is not possible because of the nature of the EEE, it shall be affixed to the packaging and to the accompanying documents. The CE Mark shall be the only marking which establishes the conformity of a product to the EU RoHS Recast Directive. No other markings indicating compliance to EU RoHS requirements shall be used.
EEE must have a type, batch or serial number or other element allowing its identification, or, where the size or nature of the EEE does not allow it, that the required information is provided on the packaging or in a document accompanying the EEE. This must be completed by the manufacturer of the EEE. Examples of this include, but are not limited to machine type, machine type model number or part number. This marking shall be affixed visibly, legibly and indelibly to the finished EEE or packaging.
Manufacturers must indicate their name, registered trade name or registered trademark and the address at which they can be contacted on the EEE or, where that is not possible, on its packaging or in a document accompanying the EEE. The address must indicate a single point at which the manufacturer can be contacted.
Irrespective of the company logo on the product, when IBM is referenced on the product as the manufacturer, the IBM single point of contact information must be included. This information must include: International Business Machines New Orchard Road Armonk, New York 10504 http://www.ibm.com/customersupport/
Labeling requirements for the Republic of Srpska Effective June 1, 2016, the marking below is required by the Republic of Srpska (administrative unit of BosniaHerzegovina) on Finished Products. The marking is in the form of a square, with minimum length of side "a" to be 5 mm, with a styled Latin letter "C" in the middle. The marking must be placed immediately adjacent to the registered trade name, i.e. name of the manufacturer or authorized representative. If the marking is increased or decreased, the proportions shown in the drawing below shall be maintained. IBM label part number 01AF466 may be used on the product to meet this requirement.
PN 46G3772 Page 150 of 197 EC J85151 13MAY05
EC 899569 04NOV93 EC G32590 08FEB06
EC 899773 07DEC94 EC L04925B 11JAN07
EC F15040 25AUG97 EC L04925M 01AUG07
EC F73298 02SEP99 EC L04925N 19FEB08
EC F74336 05SEP00 EC L05962X 08AUG08
EC F72950 23JAN02 EC L79598 25FEB09
EC H64064 13MAY03 EC N24534E 02OCT09
EC H17205 29JUL03 EC L79598A 22FEB10
EC L79598B 22SEPT10
EC L79598C 27APR2011
EC L79598D 6SEPT2011
EC N31517Y 26MAR2012
ECN31946T 19APR2013
ECN33076 5DEC2013
ECN33076A 16MAY2014
ECN46883 17OCT2014
ECP02692 26MAY2015
ECO P02838 15OCT2015
ECOP17505 21APR2016
ECO P17633 1OCT2016
ECOP17764 20MAR2017
ECOP17905 16OCT2017
ECOP17958 Jan 25, 2018
ECOP44540 June 11, 2018
ECOP44680 Mar 5, 2019
ECOP44794 Aug 9, 2019
ECO P44877 15Feb2020
ECO P45188 1Sept2020
ECO P45272 9Mar2021
ECO P45379 18Oct2021
ECO 45443 4April2022
ECO P45475 14Nov2022
This document is the property of IBM. Its use is authorized only for responding to a request for quotation or for the performance of work for IBM. All questions must be referred to the IBM Procurement Department requesting the quotation or performance of work.
Engineering Specification Dimensional graphic:
Page 151 of 197
Appearance of the final marking:
If it is not possible to affix the conformity marking to the equipment due to its nature, the conformity marking shall be affixed to its packaging or accompanying documentation.
Labeling requirements for the Eurasian Economic Union Effective March 1, 2020: A Finished Product must be labeled with: 1.Name and/or designation of electrical and radioelectronic equipment (product) (type, brand name, model (if any); 2.The product's main parameters and characteristics; 3.Name and (or) trademark of the manufacturer; 4.Name of the jurisdiction where the Finished Product has been manufactured. 5.Date of Manufacturing.
The packaging of the Finished Product must include the following information: 1.Name and (or) designation of electrical and radioelectronic equipment (product)(type, brand name, model (if any), 2.Name and (or) trademark of the manufacturer.
The Finished Product label should be clear and legible and should be on the Finished Product, reachable without disassembling with tools. When the information required above is impossible to be indicated on electrical and radioelectronic equipment (Finished Product), it can be indicated only in operational documents attached to the product.
Product operational documents should contain the following, in Russian: 1.Name and/or designation of electrical and radioelectronic equipment (product)(type, brand name, model (if any); 2.Name and (or) trademark of the manufacturer 3.Parameters and characteristics of the product; 4.Name of the jurisdiction where the Finished Product has been manufactured 5.Rules for operation and use, mounting, storage, transportation, purchasing and utilization of the product; 6.Information about measures to take in case of product malfunction; 7.Name and address of the manufacturer (person, authorized by the manufacturer), importer, their contact details; 8.Information about month and year of production and (or) about place of indicating of such information or about
the way of definition of production year.
PN 46G3772 Page 151 of 197 EC J85151 13MAY05
EC 899569 04NOV93 EC G32590 08FEB06
EC 899773 07DEC94 EC L04925B 11JAN07
EC F15040 25AUG97 EC L04925M 01AUG07
EC F73298 02SEP99 EC L04925N 19FEB08
EC F74336 05SEP00 EC L05962X 08AUG08
EC F72950 23JAN02 EC L79598 25FEB09
EC H64064 13MAY03 EC N24534E 02OCT09
EC H17205 29JUL03 EC L79598A 22FEB10
EC L79598B 22SEPT10
EC L79598C 27APR2011
EC L79598D 6SEPT2011
EC N31517Y 26MAR2012
ECN31946T 19APR2013
ECN33076 5DEC2013
ECN33076A 16MAY2014
ECN46883 17OCT2014
ECP02692 26MAY2015
ECO P02838 15OCT2015
ECOP17505 21APR2016
ECO P17633 1OCT2016
ECOP17764 20MAR2017
ECOP17905 16OCT2017
ECOP17958 Jan 25, 2018
ECOP44540 June 11, 2018
ECOP44680 Mar 5, 2019
ECOP44794 Aug 9, 2019
ECO P44877 15Feb2020
ECO P45188 1Sept2020
ECO P45272 9Mar2021
ECO P45379 18Oct2021
ECO 45443 4April2022
ECO P45475 14Nov2022
This document is the property of IBM. Its use is authorized only for responding to a request for quotation or for the performance of work for IBM. All questions must be referred to the IBM Procurement Department requesting the quotation or performance of work.
Engineering Specification
Page 152 of 197
Finished Products must be labeled with the following mark to verify compliance EAC notification.
If the product has insufficient space for this label, then the packaging for the product must be labeled.
Notification Manufacturers who have reason to believe that EEE which they have delivered to IBM is not in conformity with the EU RoHS Directive must immediately take the necessary corrective measures to bring that EEE into conformity, to withdraw it or recall it, as well as immediately notify IBM.
Requirements for Parts EEE, parts and Deliverables provided to IBM must meet EU Directive 2011/65/EU RoHS. Refer to the Directive for further details.
Suppliers must have in place documentation as required by Article 7 and carry out the internal production control procedure in line with module A of Annex II to Decision No 768/2008/EC. Suppliers must ensure that procedures are in place for series production to remain in conformity. Changes in product design or characteristics and changes in the harmonized standards or in technical specifications by reference to which conformity of EEE is declared shall be adequately taken into account. Suppliers must keep the documentation for 10 years after the EEE has been placed on the market. This documentation must be readily available to IBM and provided within two business days upon request in English.
When laboratory sampling is completed and used as part of the documentation, the test method must be in accordance with the latest version of IEC 62321 Electrotechnical products - Determination of levels of six regulated substances (lead, mercury, cadmium, hexavalent chromium, polybrominated biphenyls, polybrominated diphenyl ethers) as referred to in EN IEC 63000:2018, Technical Documentation for the Assessment of Electrical and Electronic Products with Respect to the Restriction of Hazardous Substances. Manufacturers (IEC 63000:2016), when requested by IBM, must provide all the information and documentation necessary to demonstrate the conformity of the EEE with the RoHS Directive in English.
Suppliers who have reason to believe that EEE which they have delivered to IBM is not in conformity with the EU RoHS Directive must immediately take the necessary corrective measures to bring that EEE into conformity, as well as immediately notify IBM.
China RoHS Requirements This requirement is effective on November 1, 2019.
Products listed in the China "Management Catalogue of Electrical and Electronic Products that should meet the RoHS Standards (first batch)" must complete the RoHS conformity assessment process either by meeting the Stateintroduced voluntary certification process or the Declaration of Conformity process.
Manufacturers must complete a China RoHS II conformity assessment and then choose either: Option 1 - a third party certification or Option 2 - the supplier's declaration of conformity (SDoC).
The twelve categories of products listed in the China RoHS II Catalogue manufactured or imported after November 1, 2019 must comply with these implementation measures. The relevant categories for this product specification requiring this conformance assessment are:
Monitors Scope and definition - Image output equipment that converts video signals into photo-image signals and then displays the processed data via diagrams, including the image output equipment (not including tuner) with display device as main component, such as cathode ray tube (black & white, color) monitors, and LCD monitors.
PN 46G3772 Page 152 of 197 EC J85151 13MAY05
EC 899569 04NOV93 EC G32590 08FEB06
EC 899773 07DEC94 EC L04925B 11JAN07
EC F15040 25AUG97 EC L04925M 01AUG07
EC F73298 02SEP99 EC L04925N 19FEB08
EC F74336 05SEP00 EC L05962X 08AUG08
EC F72950 23JAN02 EC L79598 25FEB09
EC H64064 13MAY03 EC N24534E 02OCT09
EC H17205 29JUL03 EC L79598A 22FEB10
EC L79598B 22SEPT10
EC L79598C 27APR2011
EC L79598D 6SEPT2011
EC N31517Y 26MAR2012
ECN31946T 19APR2013
ECN33076 5DEC2013
ECN33076A 16MAY2014
ECN46883 17OCT2014
ECP02692 26MAY2015
ECO P02838 15OCT2015
ECOP17505 21APR2016
ECO P17633 1OCT2016
ECOP17764 20MAR2017
ECOP17905 16OCT2017
ECOP17958 Jan 25, 2018
ECOP44540 June 11, 2018
ECOP44680 Mar 5, 2019
ECOP44794 Aug 9, 2019
ECO P44877 15Feb2020
ECO P45188 1Sept2020
ECO P45272 9Mar2021
ECO P45379 18Oct2021
ECO 45443 4April2022
ECO P45475 14Nov2022
This document is the property of IBM. Its use is authorized only for responding to a request for quotation or for the performance of work for IBM. All questions must be referred to the IBM Procurement Department requesting the quotation or performance of work.
Engineering Specification
Page 153 of 197
Description of scope - By material, monitors fall into CRT, DLP, LCD, LED, OLED, etc.; by use, monitors fall into monitors for safety purpose, monitors for monitoring purpose, radio & TV monitors, and computer monitors. Note: In the case that any product listed in this Catalog is used as part of the products beyond the Catalog, such product is not governed by the Catalog. Should the products in question, however, have no definite end uses and be sold individually, the Catalog shall apply.
Microcomputers Scope and definition - An entity formed when necessary peripherals and software are configured on the microcomputer hardware system, suitable for single users, including desktops (including all-in-one computers), laptops, tablets and PDAs. Description of scope - Microcomputers include desktops (including all-in-one computers), laptops, tablets and PDAs, of which, 1) desktop refers to microcomputer suitable for use on stationary desktop in offices or homes, not including computer servers and workstations designed exclusively for use in computer rooms, or other microcomputers having distinct differences from desktops, such as industrial computers for purpose of industrial control; 2) Laptop is a microcomputer characterized by its portability, with in-built input & output devices (e.g. display, keypad, etc.) and battery module; 3) Tablet refers to a hand-held microcomputer adopting a tablet structure, with the touch screen as the main input and output device; 4) PDA is a compact, lightweight, easy-to-carry, useful and low-cost hand-held computing equipment running on the embedded operating system and in-built software.
For both options, the manufacturer of the product must submit the conformity information to the China public service platform within 30 days of putting the product on the market.
For the second option, an SDoC must be provided to IBM. The required format is below.
The label must conform to one of these two options based on the conformity assessment procedure. The label must be on the product, packaging, manual, or in the operational system. For reference only, the English versions are:
PN 46G3772 Page 153 of 197 EC J85151 13MAY05
EC 899569 04NOV93 EC G32590 08FEB06
EC 899773 07DEC94 EC L04925B 11JAN07
EC F15040 25AUG97 EC L04925M 01AUG07
EC F73298 02SEP99 EC L04925N 19FEB08
EC F74336 05SEP00 EC L05962X 08AUG08
EC F72950 23JAN02 EC L79598 25FEB09
EC H64064 13MAY03 EC N24534E 02OCT09
EC H17205 29JUL03 EC L79598A 22FEB10
EC L79598B 22SEPT10
EC L79598C 27APR2011
EC L79598D 6SEPT2011
EC N31517Y 26MAR2012
ECN31946T 19APR2013
ECN33076 5DEC2013
ECN33076A 16MAY2014
ECN46883 17OCT2014
ECP02692 26MAY2015
ECO P02838 15OCT2015
ECOP17505 21APR2016
ECO P17633 1OCT2016
ECOP17764 20MAR2017
ECOP17905 16OCT2017
ECOP17958 Jan 25, 2018
ECOP44540 June 11, 2018
ECOP44680 Mar 5, 2019
ECOP44794 Aug 9, 2019
ECO P44877 15Feb2020
ECO P45188 1Sept2020
ECO P45272 9Mar2021
ECO P45379 18Oct2021
ECO 45443 4April2022
ECO P45475 14Nov2022
This document is the property of IBM. Its use is authorized only for responding to a request for quotation or for the performance of work for IBM. All questions must be referred to the IBM Procurement Department requesting the quotation or performance of work.
Engineering Specification
Page 154 of 197
Requirements for the Great Britain (England, Scotland, Wales)
References UK Statutory Instrument 2019 No. 539 Exiting the European Union Energy Conservation The Ecodesign for Energy-Related Products and Energy Information (Amendment) (EU Exit) Regulations 2019. UK Statutory Instrument 2010 No. 2617 Energy Conservation, The Ecodesign for Energy-Related Products Regulations 2010. UK Statutory Instruments 2012 No. 3032 The Restriction of the Use of Certain Hazardous Substances in Electrical and Electronic Equipment Regulations. Further information is located at; https://www.gov.uk/guidance/using-the-ukca-mark-from-1-january-2021 and https://www.gov.uk/guidance/placing-manufactured-goods-on-the-market-in-great-britain-from-1-january2021
Labeling and Documentation IBM logo products Products with an IBM logo should be labeled with the UK Conformity Assessment mark. See graphic below.
The UKCA marking must be at least 5mm in height. IBM label part number 03FP033 may be used to meet this
requirement. This requirement is effective January 1, 2021, but the UK government has allowed an extension for manufacturers until January 1, 2022.
Vendor logo products Products with another manufacturer's logo may be labeled with the UK Conformity Assessment mark. If a product or part is marked with the UK CA mark, then IBM will request the manufacturer's UK Declaration of Conformity for that product.
2.15 Requirements for modular refrigeration units
References EU Regulation (EC) No 842/2006 of the European Parliament and of the Council of 17 May 2006 on certain fluorinated greenhouse gases and amendments. EU Regulation (EC) No 1494/2007 of 17 December 2007 establishing the form of labels and additional labeling requirements as regards products and equipment containing certain fluorinated greenhouse gases EU Regulation No 517/2014 of the European Parliament and of the Council on fluorinated greenhouse gases and repealing Regulation (EC) No 842/2006 Canada Environmental Code of Practice for Elimination of Fluorocarbon Emissions from Refrigeration and Air Conditioning Systems
Requirements Refrigeration units must be designed in accordance to the guidelines for commercial and industrial systems found in the latest version of the Canada Environmental Code of Practice for Elimination of Fluorocarbon Emissions from Refrigeration and Air Conditioning Systems. Refrigeration units must also meet requirements in EU Regulations 842/2006, 1494/2007, and 517/2014. Fluorocarbons can no longer be used in newly releasing products or parts.
Additional standards may be relevant other than environmental standards such as UL, ASHRAE, and ARI standards. All refrigeration units must be designed as hermetically sealed systems. A hermetically sealed system means a
PN 46G3772 Page 154 of 197 EC J85151 13MAY05
EC 899569 04NOV93 EC G32590 08FEB06
EC 899773 07DEC94 EC L04925B 11JAN07
EC F15040 25AUG97 EC L04925M 01AUG07
EC F73298 02SEP99 EC L04925N 19FEB08
EC F74336 05SEP00 EC L05962X 08AUG08
EC F72950 23JAN02 EC L79598 25FEB09
EC H64064 13MAY03 EC N24534E 02OCT09
EC H17205 29JUL03 EC L79598A 22FEB10
EC L79598B 22SEPT10
EC L79598C 27APR2011
EC L79598D 6SEPT2011
EC N31517Y 26MAR2012
ECN31946T 19APR2013
ECN33076 5DEC2013
ECN33076A 16MAY2014
ECN46883 17OCT2014
ECP02692 26MAY2015
ECO P02838 15OCT2015
ECOP17505 21APR2016
ECO P17633 1OCT2016
ECOP17764 20MAR2017
ECOP17905 16OCT2017
ECOP17958 Jan 25, 2018
ECOP44540 June 11, 2018
ECOP44680 Mar 5, 2019
ECOP44794 Aug 9, 2019
ECO P44877 15Feb2020
ECO P45188 1Sept2020
ECO P45272 9Mar2021
ECO P45379 18Oct2021
ECO 45443 4April2022
ECO P45475 14Nov2022
This document is the property of IBM. Its use is authorized only for responding to a request for quotation or for the performance of work for IBM. All questions must be referred to the IBM Procurement Department requesting the quotation or performance of work.
Engineering Specification
Page 155 of 197
system in which all parts that contain fluorinated greenhouse gases have been hermetically sealed during their manufacturing by welding, brazing or otherwise making them tight by permanently connecting them and for which the refrigerant circuit does not need to be opened for placing the system into operation. The design of the refrigeration units must encompass the need to disallow the gas to release to the atmosphere. The level of refrigerant gas in a hermetically sealed system cannot exceed 6 kilograms per computer product.
At a minimum, the following must be labeled on the units: Notice that the product or equipment contains fluorinated greenhouse gases covered by the Kyoto Protocol Refrigerant type, e.g. HFC ASHRAE Refrigerant Number Refrigerant quantity Refrigerant oil type, and quantity, Ozone-depleting potential, Global warming potential, System is hermetically sealed, and As of 1 January 2017, the quantity of greenhouse gases contained in the product or equipment, expressed in
weight and in CO2 equivalent.
The above label must be clearly and indelibly on the product adjacent to the service points for charging or recovering the gas or on that part of the product which contains the fluorinated greenhouse gas. The above label must be translated, at a minimum, in the following languages:
English Bulgarian Czech Danish Dutch Estonian Finnish French French Canadian German Greek Hungarian
Italian Japanese Latvian Lithuanian Polish Croatian Portuguese Romanian Slovakian Slovenian Spanish Albanian
Bosnian Icelandic Macedonian Maltese Montenegrin Norwegian Serbian Swedish Turkish Ukrainian
Other labels may be required in additional languages.
The latest version of the IBM Environmental Notices and User Guide must accompany the modular refrigeration units when shipped as parts, e.g., spare parts, field replaceable units. If the equipment contains fluorinated greenhouse gases with a global warming potential of 150 or more, this information shall also be included in descriptions used for advertising.
2.16 Requirements for Original Equipment Manufacturer designed Computer Servers
References ENERGY STAR® Program Requirements for Computer Servers Version 2.1. National Sanitation Foundation Standard/ American National Standard NSF/ANSI 426-2019 Environmental Leadership and Corporate Social Responsibility Assessment of Servers. American Society of Heating, Refrigerating, and Air-conditioning Engineers (ASHRA) Thermal Guidelines for Data Processing Environments, 4th Edition.
PN 46G3772 Page 155 of 197 EC J85151 13MAY05
EC 899569 04NOV93 EC G32590 08FEB06
EC 899773 07DEC94 EC L04925B 11JAN07
EC F15040 25AUG97 EC L04925M 01AUG07
EC F73298 02SEP99 EC L04925N 19FEB08
EC F74336 05SEP00 EC L05962X 08AUG08
EC F72950 23JAN02 EC L79598 25FEB09
EC H64064 13MAY03 EC N24534E 02OCT09
EC H17205 29JUL03 EC L79598A 22FEB10
EC L79598B 22SEPT10
EC L79598C 27APR2011
EC L79598D 6SEPT2011
EC N31517Y 26MAR2012
ECN31946T 19APR2013
ECN33076 5DEC2013
ECN33076A 16MAY2014
ECN46883 17OCT2014
ECP02692 26MAY2015
ECO P02838 15OCT2015
ECOP17505 21APR2016
ECO P17633 1OCT2016
ECOP17764 20MAR2017
ECOP17905 16OCT2017
ECOP17958 Jan 25, 2018
ECOP44540 June 11, 2018
ECOP44680 Mar 5, 2019
ECOP44794 Aug 9, 2019
ECO P44877 15Feb2020
ECO P45188 1Sept2020
ECO P45272 9Mar2021
ECO P45379 18Oct2021
ECO 45443 4April2022
ECO P45475 14Nov2022
This document is the property of IBM. Its use is authorized only for responding to a request for quotation or for the performance of work for IBM. All questions must be referred to the IBM Procurement Department requesting the quotation or performance of work.
Engineering Specification
Page 156 of 197
Definitions (see NSF/ANSI 426-2019 for a complete listing of definitions) Computer server: Hardware system providing services and manage networked resources for client devices) e.g., desktop computers, notebook computers, thin clients, wireless devices, PDAs, IP telephones, other computer servers, or other network devices). A computer server: - is sold through enterprise channels for use in data centers and office/corporate environments; - is primarily accessed via network connections, versus directly-connected user input devices such as a keyboard or mouse; - is marketed and sold as a computer server; - is designed for and listed as supporting one or more computer server operating systems (OS) and, or hypervisors; - is targeted to run user-installed applications typically, but not exclusively, enterprise in nature; - provides support for error-correcting code (ECC) and, or buffered memory (including both buffered dual in-line memory modules (DIMMs) and buffered on board (BOB) configurations); - is packaged and sold with one or more AC-DC or DC-DC power supplies; and - is designed such that all processors have access to shared system memory and are visible to a single OS or hypervisor. In addition to the above, the definition of Computer servers, for the purposes of this section, is given in the ENERGY STAR Program Requirements for Computer Servers Version 2.1: blade, multi-node, rack-mounted, or pedestal form factor computer servers are included with no more than four processor sockets in the computer server (or per blade or node in the case of blade or multi-node servers). Commonly available tools: A hand operated tool which is readily available for purchase by any individual or business without restrictions. Server Appliance: A computer server that is bundled with a pre-installed OS and application software that is used to perform a dedicated function or set of tightly coupled functions. Server appliances deliver services through one or more networks (e.g., IP or SAN), and are typically managed through a web or command line interface. Server appliance hardware and software configurations are customized by the vendor to perform a specific task (e.g., name services, firewall services, authentication services, encryption services, and voice-over-IP (VoIP) services), and are not intended to execute user-supplied software. [Source: ENERGY STAR® Program Requirements for Computer Servers Version 2.1]
Requirements The following products are excluded from the requirements in this section: Fully Fault Tolerant Servers Server Appliances High Performance Computing Systems Large Servers Storage Products including Blade Storage, and Network Equipment. See the latest version of the ENERGY STAR Program Requirements for Computer Servers for definitions of the above product types.
Computer servers designed by an Original Equipment Manufacturer (OEM) which will have an IBM logo, or a logo owned by IBM must meet the following criteria:
Product shall conform to the most current version of the ENERGY STAR Computer Servers program if applicable.
Product shall support Class A2 allowable environmental operating range published in the American Society of Heating, Refrigerating, and Air-conditioning Engineers (ASHRAE) Thermal Guidelines for Data Processing Environments, 4th Edition in Table 2.1.
Plastic parts exceeding 25 grams shall not contain greater than 1000 ppm chlorine or greater than 1000 ppm bromine. Parts that exceed 25% postconsumer recycled content shall contain a maximum of 5000 ppm chlorine and 5000 ppm bromine. This specific requirement does not apply to printed circuit boards, cables and wiring, fans and electronic components.
PN 46G3772 Page 156 of 197 EC J85151 13MAY05
EC 899569 04NOV93 EC G32590 08FEB06
EC 899773 07DEC94 EC L04925B 11JAN07
EC F15040 25AUG97 EC L04925M 01AUG07
EC F73298 02SEP99 EC L04925N 19FEB08
EC F74336 05SEP00 EC L05962X 08AUG08
EC F72950 23JAN02 EC L79598 25FEB09
EC H64064 13MAY03 EC N24534E 02OCT09
EC H17205 29JUL03 EC L79598A 22FEB10
EC L79598B 22SEPT10
EC L79598C 27APR2011
EC L79598D 6SEPT2011
EC N31517Y 26MAR2012
ECN31946T 19APR2013
ECN33076 5DEC2013
ECN33076A 16MAY2014
ECN46883 17OCT2014
ECP02692 26MAY2015
ECO P02838 15OCT2015
ECOP17505 21APR2016
ECO P17633 1OCT2016
ECOP17764 20MAR2017
ECOP17905 16OCT2017
ECOP17958 Jan 25, 2018
ECOP44540 June 11, 2018
ECOP44680 Mar 5, 2019
ECOP44794 Aug 9, 2019
ECO P44877 15Feb2020
ECO P45188 1Sept2020
ECO P45272 9Mar2021
ECO P45379 18Oct2021
ECO 45443 4April2022
ECO P45475 14Nov2022
This document is the property of IBM. Its use is authorized only for responding to a request for quotation or for the performance of work for IBM. All questions must be referred to the IBM Procurement Department requesting the quotation or performance of work.
Engineering Specification
Page 157 of 197
OEM shall provide a listing of plastic part numbers with part number weight, an indication as to whether or not the plastic resin used has postconsumer recycled resin and if so, the percentage of postconsumer recycled plastic content.
External enclosure of the server (excludes bezels, latches, brand badges, labels, mounting brackets and parts < 100 grams) shall consist of a minimum 10% postconsumer (PCR) plastic content. If the sum of all the plastic parts for the external enclosure weighs less than 10% of the total weight of all external enclosure parts, then this is not applicable.
The product shall be designed with the following features: o External enclosures, or those portions of the enclosures that must be removed to accomplish repair, reuse, recycling or safe handling, shall be removable by hand or with commonly available tools, without destruction of the enclosure. o Components requiring selective treatment shall be identified (please note, many of these are prohibited from use by this specification in Table 1) and removable by hand or commonly available tools. These components include: Polychlorinated biphenyls (PCB) containing capacitors, Mercury containing components, Batteries, Printed circuit boards if the surface is greater than 10 square centimeters, Toner cartridges, Plastic containing brominated flame retardants, Asbestos, Cathode ray tubes, chlorofluorocarbons(CFC), hydrochlorofluorocarbons(HCFC) or hydrofluorocarbons (HFC), hydrocarbons (HC), Gas discharge lamps, Liquid crystal displays with a surface greater than 100 square centimeters and all backlights with gas discharge lamps, External electric cables, Components containing refractory ceramic fibers, Components containing radioactive substances, Electrolytic capacitors containing substances of concern (height > 25 mm, diameter > 25 mm or proportionately similar volume).
All plastic parts > 100 grams shall meet the following requirements: o Clearly marked with material type in accordance with ISO 11469/1043, o A photo of each plastic part showing the material type marking is required, o Separable by hand or with commonly available tools, such that plastic parts can be separated into compatible or compatible with limitations material types. o A description of procedures for separating the plastic parts by hand or with commonly available tools is required. o Printed circuit boards, connectors, wire and cables are excluded from this requirement.
The supplier is requested to use Postconsumer Recycled Content (PCR) resin as much as possible. If PCR resin is present, report it on the resin tab on PCD. IBM has two approved PCR resins with applicable IBM Material Codes: 23-931J (13) PC/ABS Bayblend FR630 GR (30% recycle) Covestro Standard and Raven black 23-931J (17) PC/ABS Sabic Lexan RCX7243 (30% recycle) Standard and Raven black. Other resins that may be used are: Polycarbonate/ Acrylonitrile butadiene styrene (PC/ABS blend) Echo Tech PCABSFR401e with 30% PCR Polycarbonate/ Acrylonitrile butadiene styrene (PC/ABS blend) Sabic Cycoloy RCX7233 with 30% PCR.
PN 46G3772 Page 157 of 197 EC J85151 13MAY05
EC 899569 04NOV93 EC G32590 08FEB06
EC 899773 07DEC94 EC L04925B 11JAN07
EC F15040 25AUG97 EC L04925M 01AUG07
EC F73298 02SEP99 EC L04925N 19FEB08
EC F74336 05SEP00 EC L05962X 08AUG08
EC F72950 23JAN02 EC L79598 25FEB09
EC H64064 13MAY03 EC N24534E 02OCT09
EC H17205 29JUL03 EC L79598A 22FEB10
EC L79598B 22SEPT10
EC L79598C 27APR2011
EC L79598D 6SEPT2011
EC N31517Y 26MAR2012
ECN31946T 19APR2013
ECN33076 5DEC2013
ECN33076A 16MAY2014
ECN46883 17OCT2014
ECP02692 26MAY2015
ECO P02838 15OCT2015
ECOP17505 21APR2016
ECO P17633 1OCT2016
ECOP17764 20MAR2017
ECOP17905 16OCT2017
ECOP17958 Jan 25, 2018
ECOP44540 June 11, 2018
ECOP44680 Mar 5, 2019
ECOP44794 Aug 9, 2019
ECO P44877 15Feb2020
ECO P45188 1Sept2020
ECO P45272 9Mar2021
ECO P45379 18Oct2021
ECO 45443 4April2022
ECO P45475 14Nov2022
This document is the property of IBM. Its use is authorized only for responding to a request for quotation or for the performance of work for IBM. All questions must be referred to the IBM Procurement Department requesting the quotation or performance of work.
Engineering Specification
Page 158 of 197
3 Notification Procedures
If the Deliverable being supplied to IBM does not meet one or more of the applicable requirements in ES 46G3772, the Supplier must immediately notify their IBM procurement representative. This also applies if the Supplier or a subcontractor(s) makes changes in their operations that will cause a Deliverable to no longer comply with ES 46G3772. If any Deliverable contains a substance in applications restricted by this specification, Suppliers must immediately report such information to their IBM procurement representative.
4 Removed
5 Revision History
Date
2022-11-14
EC Level
P45475
Change Summary
Table 1 Added a note about PFHxS which are under prohibited under PFOS and added additional prohibited concentrations. Added a note about LC-PFCAs which fall under PFOA. Table 3- added Maximum to the threshold limit to match wording for RoHS substances in 97P3864 Table 4a Added Bromine to Brominated Flame retardant substance and added Chlorine to Chlorinated Flame retardant substance Table 5 1 new SVHC added - n-(hydroxymethyl)acrylamide Table 13- added Maximum to the threshold limit to match wording for RoHS substances in 97P3864 Section 2.12.1 Added reference to Israel: Energy Sources Law Section 2.12.2 Added reference to United States Energy Conservation Program for Consumer Products Section 2.12.3 Added reference to Israel: Energy Sources Law Section 2.12.7 Added reference to Israel: Energy Sources Law Section 2.12.8 Added reference to United Kingdom Ecodesign for Energy-Related Products and Energy Information Section 2.12.9 Added reference to United Kingdom Ecodesign for Energy-Related Products and Energy Information Section 2.12.12 Added reference to Israel: Energy Sources Law, 1989 - and United Kingdom Ecodesign for Energy-Related Products and Energy Information Section 2.16 Added a reference to reporting PCR content on the resin tab on the PCD. Annex YY Updated the listing and updated CAS Numbers Annex XX Organophosphate Compounds -renamed to Annex ZZ
2022-4-26
P45443
2021-10-18 P45379
Table 4 Added Critical Raw Materials and Organophosphate Compounds Table 5- CAS number added for 2,3,3,3-tetrafluoro-2-(heptafluoropropoxy)propionic acid Created section 2.12.7 Compressors Annex A Added new CAS number for actinolite Created Annex YY for Critical Raw Materials Created Annex ZZ for Organophosphate Compounds Table 1 The prohibition of decaBDE clarified, PFOS and PFOA updated the definitions and updated the OECD link Table 2 Changed individual mentions of PFASs, PFOAs, and PFOSs to PFASs substances definitions and updated the OECD link. Table 4. Updated individual mentions of PFASs and PFACs to a broader definition of PFAS substances group, updated OECD link and changed the level to any level Table 5 -. 5 new SVHCs added medium-chain chlorinated paraffins, 4,4'-(1-methylpropylidene)bisphenol, BMP, TBNPA and BMP, 1,4 dioxane, Bis(2-(2-methoxyethoxy)ethyl)ether Section 2.12.1 Added reference to BC, HI, OR, VT implementing Appliance Efficiency regulations for computers and computer monitors. Added amendments to EU 2019/2021 by EU 2021/341, Adding reference to UK and Turkey implementing EU 2019/2021 and Turkey implementing EU 2008/1275/EC Section 2.12.2 Added reference to UK and Turkey implementing EU 2019/1782 Sections 2.12.3 and 2.12.4 Added reference to BC, CA, CO, HI, OR, VT and WA implementing California Appliance Efficiency regulations for computers and computer monitors, and reference to Turkey implementing EU 2008/1275/EC Sections 2.12.5, 2.12.6, 2.12.10, and 2.12.14 Adding reference to Turkey implementing EU 2008/1275/EC Section 2.12.7 added amendments to EU 2019/1781 by EU 2021/341 and reference to United Kingdom and Turkey implementing EU 2019/1781 Section 2.12.8 Added reference to United Kingdom implementing EU regulations 547/2012 and 641/2009
PN 46G3772 Page 158 of 197 EC J85151 13MAY05
EC 899569 04NOV93 EC G32590 08FEB06
EC 899773 07DEC94 EC L04925B 11JAN07
EC F15040 25AUG97 EC L04925M 01AUG07
EC F73298 02SEP99 EC L04925N 19FEB08
EC F74336 05SEP00 EC L05962X 08AUG08
EC F72950 23JAN02 EC L79598 25FEB09
EC H64064 13MAY03 EC N24534E 02OCT09
EC H17205 29JUL03 EC L79598A 22FEB10
EC L79598B 22SEPT10
EC L79598C 27APR2011
EC L79598D 6SEPT2011
EC N31517Y 26MAR2012
ECN31946T 19APR2013
ECN33076 5DEC2013
ECN33076A 16MAY2014
ECN46883 17OCT2014
ECP02692 26MAY2015
ECO P02838 15OCT2015
ECOP17505 21APR2016
ECO P17633 1OCT2016
ECOP17764 20MAR2017
ECOP17905 16OCT2017
ECOP17958 Jan 25, 2018
ECOP44540 June 11, 2018
ECOP44680 Mar 5, 2019
ECOP44794 Aug 9, 2019
ECO P44877 15Feb2020
ECO P45188 1Sept2020
ECO P45272 9Mar2021
ECO P45379 18Oct2021
ECO 45443 4April2022
ECO P45475 14Nov2022
This document is the property of IBM. Its use is authorized only for responding to a request for quotation or for the performance of work for IBM. All questions must be referred to the IBM Procurement Department requesting the quotation or performance of work.
Engineering Specification
Page 159 of 197
Date
2021-03-09
2020-09-01 2020-02-15
EC Level
P45272
P45188 P44877
Change Summary
Section 2.12.9 Added reference to UK implementing EU regulation 327/2011 Section 2.12.11 Added reference to B.C. energy efficiency regulation 14/2015 amended by Reg No. 34/2021 and B.C Reg No. 14/2015 Section 2.12.12 Removed reference to Turkey Ecodesign Requirements for Computers and Computer Servers, added reference to UK and Turkey implementing EU 617/2013 as amended by EU 2019/424 and added reference to BC, HI, OR, and VT implementing California Appliance Efficiency regulations for computers and computer monitors Section 2.12.15 Added reference to BC, CA, CO, HI, OR, VT and WA implementing California Appliance Efficiency regulations for computers and computer monitors Section 2.12.16 Added reference to Turkey and UK implementing EU 2019/424 as amended by EU 341/2021 and added reference to EU 341/2021 amending EU 2019/424 Annex NN Added 5 new SVHCs glutaral, orthoboric acid, sodium salt, 2-(4-tertbutylbenzyl)propionaldehyde and its individual stereoisomers, Dioctyltin dilaurate, stannane, dioctyl-, bis(coco acyloxy) derivs., and any other stannane, dioctyl-, bis(fatty acyloxy) derivs, and PDPP. Annex OO - Updated CAS numbers for substances to the REACH Authorization list. First page Owner of specification changed. Table 1 The prohibition of halogenated flame retardants in electronic displays clarified. Reference to a restriction from the EU REACH regulation removed for PFOA and deca BDE entries. Added a reference for TSAC for restriction for decaBDE and HCBD entries. Added PIP (3:1) and PCTP to the table due to TSCA prohibition. Section 2.2 Handling of proprietary information on the PCD added. Table 4a Removed Pentachlorothiophenol (PCTP), PIP (3:1) - phenol, isopropylated phosphate (3:1) (CAS 68937417) since these are now in Table 1. Section 2.12.1 Added references - EN 45552, 45553, 45554, 45557 :2020 for assessment of the durability of energy-related products, assessment of the ability to remanufacture energy- related products, ability to repair, reuse and upgrade energy-related products, and assessing the proportion of recycled material content in energyrelated products. Added EN 45555, 45556, 45558, 45559:2019 for assessing the recyclability and recoverability of energy- related products, assessing the proportion of reused components in energy- related products, declare the use of critical raw materials in energy-related products, information relating to material efficiency aspects of energy-related products Removed Guidelines for Media Sanitation NIST Special Publication 800-88 and EN 45558:2019 General Method to declare the use of critical raw materials in energy-related products. Section for California updated for KMMs and KVMs Section 2.12.2 Added Turkey to the EU section on External Power Supplies requirements. Removed definition for external power supplies that no longer is valid after April 1, 2020. Added an out of scope statement for the EU/Turkey external pwr supply regulations. Added reference for Norway implementing EU 2019/1782 eco design for EPSs Section 2.12.7 and 2.12.8 Added references for Norway and Iceland implementing EU 2019/1781 eco design for electric motors. Section 2.12.9 Added references for Turkey's Eco Design for fans, Norway and Iceland implementing EU 2019/1781 eco design for electric motors Section 2.12.16 Added references - Guidelines for Media Sanitation NIST Special Publication 800-88 and EN 45558:2019 General Method to declare the use of critical raw materials in energy-related products Section 2.14 Requirements for UKCA mark updated. Section 1.5 Changed https://www.ibm.com/procurement/ossi.wss to https://www.ibm.com/procurement/ossi Table 1 - Added USA legal reference for mercury use restriction. PFOA restriction updated for EU POPs regulation. Added Maine restriction for PFOS. Section 2.2 Reference for EN 50581:2012 updated to EN IEC 63000:2018 Section 2.2.1 https://www.ibm.com/procurement/ossi.wss changed to https://www.ibm.com/procurement/ossi Section 2.2.2 https://www.ibm.com/procurement/ossi.wss changed to https://www.ibm.com/procurement/ossi Section 2.2.3 Added a potential requirement to report the supplier's SCIP ID to IBM for an SVHC. Table 5 Added three new SVHCs - 1-vinylimidazole; 2-methylimidazole; and Dibutylbis(pentane-2,4-dionato-O,O')tin. Added nine chemical names and CAS #s for PFBS. Section 2.12.12 - Removed requirement for EU Regulation 617/2013 for computer servers. Added Ukraine and Turkey Regulations for computer servers. Section 2.14 Updated with additional requirements for the Eurasian Economic Commission RoHS requirements including a list of in-scope products. Date of manufacturing requirement added for EAC mark. Reference for EN 50581:2012 updated to EN IEC 63000:2018 in multiple locations. Added UK CA mark and DoC. Annex NN Added four new SVHCs - 1-vinylimidazole, 2-methylimidazole, Dibutylbis(pentane-2,4-dionatoO,O')tin and Butyl 4-hydroxybenzoate (Butylparaben). Added nine chemical names and CAS #s for PFBS Annex OO - Added 11 substances to the REACH Authorization list. Section 1.2 Definition of Consumer Product removed. Added "Placing on the Market", "Putting into Service" and Electronic Display.
PN 46G3772 Page 159 of 197 EC J85151 13MAY05
EC 899569 04NOV93 EC G32590 08FEB06
EC 899773 07DEC94 EC L04925B 11JAN07
EC F15040 25AUG97 EC L04925M 01AUG07
EC F73298 02SEP99 EC L04925N 19FEB08
EC F74336 05SEP00 EC L05962X 08AUG08
EC F72950 23JAN02 EC L79598 25FEB09
EC H64064 13MAY03 EC N24534E 02OCT09
EC H17205 29JUL03 EC L79598A 22FEB10
EC L79598B 22SEPT10
EC L79598C 27APR2011
EC L79598D 6SEPT2011
EC N31517Y 26MAR2012
ECN31946T 19APR2013
ECN33076 5DEC2013
ECN33076A 16MAY2014
ECN46883 17OCT2014
ECP02692 26MAY2015
ECO P02838 15OCT2015
ECOP17505 21APR2016
ECO P17633 1OCT2016
ECOP17764 20MAR2017
ECOP17905 16OCT2017
ECOP17958 Jan 25, 2018
ECOP44540 June 11, 2018
ECOP44680 Mar 5, 2019
ECOP44794 Aug 9, 2019
ECO P44877 15Feb2020
ECO P45188 1Sept2020
ECO P45272 9Mar2021
ECO P45379 18Oct2021
ECO 45443 4April2022
ECO P45475 14Nov2022
This document is the property of IBM. Its use is authorized only for responding to a request for quotation or for the performance of work for IBM. All questions must be referred to the IBM Procurement Department requesting the quotation or performance of work.
Engineering Specification
Page 160 of 197
Date
2019-08-09 2019-03-05
EC Level
P44794 P44680
Change Summary
Table 1 Restriction for BBP, DEHP, DBP and DIBP changed to allow use in medical devices until July 2021. Halogenated flame retardants prohibited in electronic displays. Removed phthalates when summed together at or above 1000 ppm. Extended definition for PFOA to PFOA related compounds. Section 2.2 Requirement added for supply chain to update PCD if new requirements impact the part or product and the PCD requires an update. Table 4a Added CAS number for Dechlorane Plus. Added 2,4,6-tris(tert-butyl)phenol (2,4,6-TTBP), Pentachlorothiophenol (PCTP), PIP (3:1) - phenol, isopropylated phosphate (3:1) (CAS 68937417). Removed Organohalogen flame retardants in electronic casings. Added N,N'-mixed phenyl and tolyl derivatives of 1,4benzenediamine (CAS 68953-84-4). Table 5 Added Diisohexyl phthalate, 2-benzyl-2-dimethylamino-4'-morpholinobutyrophenone, 2-methyl-1-(4methylthiophenyl)-2-morpholinopropan-1-one, and Perfluorobutane sulfonic acid (PFBS) and its salts. Section 2.3.1 - Cadmium labeling requirement added for electronic displays. Section 2.3.2 - Plastic Part Marking updated for EU Ecodesign regulation for electronic displays. Section 2.12.1 - Added reference for New Zealand Information Sheet for monitors. Added requirements for electronic displays for EU Regulation 2019/2021 and EU Regulation 2019/2013. Removed monitor requirements for EU Regulation 1275/2008. Section 2.12.2 - Added EU regulation 2019/1782 for EPSs and requirements. Deleted requirements for previous EU regulation for EPSs. Added New Zealand EPS information sheet. Section 2.12.7 - Added requirements for EU regulation 2019/1781 for motors. Section 2.12.8 - Added reference for EU 2019/1781 for motors and variable speed drives. Added requirements for Canada. Section 2.12.9 - Added reference and requirements for EU 2019/1781 for motors and variable speed drives. Section 2.12.11 Added requirement for UPSs for the USA. Section 2.12.13 - Lamp section removed as this regulation has been repealed. Section 2.12.14 - Updated with amendment from EU Regulation 2019/2021 which excludes desktop computers, integrated desktop computers notebook computers and electronic displays Section 2.12.16 - Reference added - EN 303 470:2019. Section 2.14 - RoHS requirements for Eurasian Economic Union set for March 2020. Section 2.16 Two additional PCR resins added. Annex NN Four additional SVHCs added. Annex YY Removed. Table 1 Additional prohibitions for Pentachlorophenol. Table 4a - Added DBDPE and DP. Table 5 - CAS number added for Dechlorane Plus. Four new SVHCs added - 2-methoxyethyl acetate, Tris(4nonylphenyl, branched and linear) phosphite (TNPP) with 0.1% w/w of 4-nonylphenol, branched and linear (4-NP), 2,3,3,3-tetrafluoro-2-(heptafluoropropoxy)propionic acid, its salts and its acyl halides (covering any of their individual isomers and combinations thereof), 4-tert-butylphenol. Table 8 Dangerous goods info updated. Section 2.10 Croatia flyer or label requirement removed. Section 2.12.1 - References for Washington and Colorado regulations added. Section 2.12.8 - Clarification added for rotodynamic water pumps. Section 2.12.11 Updated with new Canada definition of battery charger in accordance with CSA C381.2-17. New requirements added for Colorado and Washington regulations. Section 2.12.12 - References added for Washington and Colorado regulations. Section 2.12.16 Updated with references for the published EU Regulation 2019/424. Section 2.14 Updated with China RoHS labeling and DoC requirements for monitors and microcomputers. Annex J Additional nickel substances added as examples. Annex K - Additional CAS number added. Annex P Additional SCCPs CAS numbers added as well as synonyms for SCCPs. Annex Y Additional magnesium compounds added. Annex NN - CAS numbers added for Dechlorane Plus; 4-Nonylphenol, branched and linear, ethoxylated; and 4Nonylphenol, branched and linear. CAS numbers switched for Acids generated from chromium trioxide. Four new SVHCs added - 2-methoxyethyl acetate, Tris(4-nonylphenyl, branched and linear) phosphite (TNPP) with 0.1% w/w of 4-nonylphenol, branched and linear (4-NP), 2,3,3,3-tetrafluoro-2-(heptafluoropropoxy)propionic acid, its salts and its acyl halides (covering any of their individual isomers and combinations thereof), 4-tertbutylphenol. Annex OO - CAS numbers added for 4-Nonylphenol, branched and linear, ethoxylated. CAS numbers switched for Acids generated from chromium trioxide. Annex TT - Additional CAS numbers added. Section 1.2 Definitions - Postconsumer material updated for published standard. Unintentional trace contamination added. Table 1 Removed Hexachloroethane. Added further restrictions for REACH for multiple substances in clothing and textiles. 2-methoxyethanol updated with removal of restriction for semiconductor manufacturing. Unintentional trace contamination added for PCBs.
PN 46G3772 Page 160 of 197 EC J85151 13MAY05
EC 899569 04NOV93 EC G32590 08FEB06
EC 899773 07DEC94 EC L04925B 11JAN07
EC F15040 25AUG97 EC L04925M 01AUG07
EC F73298 02SEP99 EC L04925N 19FEB08
EC F74336 05SEP00 EC L05962X 08AUG08
EC F72950 23JAN02 EC L79598 25FEB09
EC H64064 13MAY03 EC N24534E 02OCT09
EC H17205 29JUL03 EC L79598A 22FEB10
EC L79598B 22SEPT10
EC L79598C 27APR2011
EC L79598D 6SEPT2011
EC N31517Y 26MAR2012
ECN31946T 19APR2013
ECN33076 5DEC2013
ECN33076A 16MAY2014
ECN46883 17OCT2014
ECP02692 26MAY2015
ECO P02838 15OCT2015
ECOP17505 21APR2016
ECO P17633 1OCT2016
ECOP17764 20MAR2017
ECOP17905 16OCT2017
ECOP17958 Jan 25, 2018
ECOP44540 June 11, 2018
ECOP44680 Mar 5, 2019
ECOP44794 Aug 9, 2019
ECO P44877 15Feb2020
ECO P45188 1Sept2020
ECO P45272 9Mar2021
ECO P45379 18Oct2021
ECO 45443 4April2022
ECO P45475 14Nov2022
This document is the property of IBM. Its use is authorized only for responding to a request for quotation or for the performance of work for IBM. All questions must be referred to the IBM Procurement Department requesting the quotation or performance of work.
Engineering Specification
Page 161 of 197
Date
2018-06-11 2018-02-05 2017-10-16
2017-03-20
EC Level
P44540 P17958 P17905
P17764
Change Summary
Table 4a Table renamed to just include substances. Added entry for Cobalt in batteries and changed neodymium to be reported only in HDDs. Batteries were given their own entry for reporting lead compounds. Table 4b Parts, components, commodities reporting moved to this new table. Table 5 Additional SVHCs added. Section 2.3.1 Labeling for Medical Devices that contain natural rubber added. Table 8 Reference to Columbia battery regulation for zinc carbon and alkaline batteries. Section 2.6 Reference to US regulation for mercury reporting added. Section 2.12.2 New requirements for EPSs added for Canada. Section 2.12.11 New requirements added for Canada. Requirements for UPSs for the US removed. Information about a California advisory for backup battery charger systems and testing added. Section 2.12.16 Edited to reflect new draft of EU ERP regulation for servers and data storage products. Section 2.14 - Effective date for labeling for the Eurasian Economic Union moved to YE2019. Annex F removed. Annex NN Additional SVHCs added. Annex YY. CAS numbers added for 3 of the substances. Table 1 Removed bold font for reference to prohibitions in manufacturing. Table 4 Removed DCHP Table 5 SVHCs added. Section 2.12.3 Notebooks added. New Vietnam standards added. Section 2.12.11 - Battery chargers must be certified in CA MAEDBS. British Columbia allowance added for products compliant to US DOE. Annex AA Additional phthalates added. Annex NN SVHCs added. Table 1 BNST removed. Canada repealed this restriction. Section 2.12.1 - Added Mexico requirements. Section 2.12.2 - Added Mexico requirements. Added clarifications for exempt EPS in the US. Section 2.12.12 Mexico requirements removed. Additional Requirements for OEM designed servers updated to reflect new NSF EPEAT standard requirements. Section 2.12.15 - Added. Section 2.12.16 Added. Section 2.16 Updated to reflect new NSF/ANSI 426-2017 standard. Section 1.2 Definitions - added In vitro diagnostic medical device, medical device and consumer product. Table 1 - Added CMR and endocrine disrupting substances for In Vitro Medical Devices and Medical Devices. Mercury restriction clarified to include Articles, etc. PFOA added. Table 4 - Lead and lead compounds used in parts or products that are not within scope of EU RoHS added. Organohalogen flame retardants added. PFOA removed. Section 2.2.3 - Reference added for ECHA Guidance for Substances in articles. Table 5 - Added to specific list of SVHCs (already in Annex NN) - Cyclohexane-1,2-dicarboxylic anhydride, Hexahydromethylphthalic anhydride, Hexahydro-4-ethylphthalic anhydride, Lead titanium zirconium oxide, N,N-dimethylacetamide (DMAC), Silicic acid, lead salt, 1,3,5-Tris(oxiran-2-ylmethyl)-1,3,5-triazinane-2,4,6trione (TGIC). Section 2.9.2 - Added two new amendments which broaden the scope of the regulation. Section 2.12.1 Updated references and definitions for Vietnam. Clarification added that rack mounted displays are out of scope of California energy requirements for monitors. Section 2.12.2 Removed reference for use of US testing standard allowed for Canada. Section 2.12.3 Requirements for Vietnam added. Section 2.12.9 - Ecuador requirements for stand-alone fans removed. Section 2.12.11 - Reference to Oregon HB 3025 added. Section 2.12.12 - EU Guideline for EU Regulation 617/2013 added as a reference. Out of scope products listed. Section 2.12.14 - EU Guideline for EU Regulation 617/2013 added as a reference. Out of scope products listed. Section 2.14 Reference added for Ukraine RoHS technical regulation. Republic of Srpska C Mark graphic updated. Section 2.14.3 - Reference to 97P3864 for RoHS exemptions. Annex G - Additional substances added. Annex NN One additional SVHC added. Annex OO Twelve additional authorized SVHCs added. Annex YY deleted. Section 1.2 Definitions Added Industrial monitoring and control instruments and Medical Devices. Removed Plastic. Table 1 Added restriction for thermal paper for Bisphenol A. Restriction added for mice cables for Tris (1,3dichloro-2-propyl) phosphate and Tris (2-chloroethyl) phosphate. Added REACH restriction for Decabromo diphenyl ether. Section 2.2 - Specifically added Medical Devices and Monitoring and Control instruments to list of products requiring a PCD. Examples of these products added.
PN 46G3772 Page 161 of 197 EC J85151 13MAY05
EC 899569 04NOV93 EC G32590 08FEB06
EC 899773 07DEC94 EC L04925B 11JAN07
EC F15040 25AUG97 EC L04925M 01AUG07
EC F73298 02SEP99 EC L04925N 19FEB08
EC F74336 05SEP00 EC L05962X 08AUG08
EC F72950 23JAN02 EC L79598 25FEB09
EC H64064 13MAY03 EC N24534E 02OCT09
EC H17205 29JUL03 EC L79598A 22FEB10
EC L79598B 22SEPT10
EC L79598C 27APR2011
EC L79598D 6SEPT2011
EC N31517Y 26MAR2012
ECN31946T 19APR2013
ECN33076 5DEC2013
ECN33076A 16MAY2014
ECN46883 17OCT2014
ECP02692 26MAY2015
ECO P02838 15OCT2015
ECOP17505 21APR2016
ECO P17633 1OCT2016
ECOP17764 20MAR2017
ECOP17905 16OCT2017
ECOP17958 Jan 25, 2018
ECOP44540 June 11, 2018
ECOP44680 Mar 5, 2019
ECOP44794 Aug 9, 2019
ECO P44877 15Feb2020
ECO P45188 1Sept2020
ECO P45272 9Mar2021
ECO P45379 18Oct2021
ECO 45443 4April2022
ECO P45475 14Nov2022
This document is the property of IBM. Its use is authorized only for responding to a request for quotation or for the performance of work for IBM. All questions must be referred to the IBM Procurement Department requesting the quotation or performance of work.
Engineering Specification
Page 162 of 197
Date EC Level
Change Summary
2016-10-01 P17633 2016-04-15 P17505
Table 4 Added: Dysprosium and compounds, Neodymium and compounds, Praseodymium and compounds Terbium and compounds, Tris (1,3-dichloro-2-propyl) phosphate (reporting only for cables, adaptors and other connecting devices, storage media such as compact discs, for interactive software, not for mice cables.) Removed: Bisphenol A (moved to Table 5). Changed: Cobalt metal changed to Cobalt and substances and Magnesium compounds added to Magnesium entry Table 5 Added: 4-Heptylphenol, branched and linear, 4,4'-isopropylidenediphenol, Nonadecafluorodecanoic acid (PFDA), p-(1,1-dimethylpropyl)phenol Section 2.2.3 - Made minor clarifications. Section 2.9.2 Additional products added to scope. Section 2.12.1 Added additional information for Vietnam. Added requirements for California. Section 2.12.2 Canada now accepts US testing. Section 2.12.11 Added clarification for battery chargers out of scope. Added US requirements for battery chargers. Added US requirements for UPSs. Section 2.12.12 Added further information for definition as listed by A/NZ. Added small scale server definition. Added requirements for California. Section 2.12.14 Removed requirement for testing in Israel. Section 2.14 Added requirements for EAEC, medical devices and monitoring and control equipment. Listed out EEE categories and referred to exemptions. Section 2.16 Added requirement to use post-consumer resins. Annex NN added new SVHCs. Annex YY added. Section 1.2 Definitions - Added EU and EFTA. Section 2.1.1 - Added back into specification the prohibition on use of PVC and TBBA in systems enclosures. Table 1 Remove restriction for cadmium alloy application, added restriction for Articles and zinc plated Articles. Prohibition added for lead in paint at 90 ppm and Articles treated with paints and varnishes. Added Inorganic ammonium salts, BPA, and Radioactive substances. Altered restriction for Tris (2-chloroethyl) phosphate. Restriction for Pentachlorophenol in textiles and articles removed. Added restriction for Preparations for DBT. Added restriction for varnish for DEGME. Removed the following authorized SVHCs - Acids generated from chromium trioxide and their oligomers Ammonium dichromate, Chromium trioxide, 4,4'Diaminodiphenylmethane, Diarsenic pentaoxide, Diarsenic trioxide, 2,4-Dinitrotoluene, Lead chromate, Lead chromate molybdate sulphate red, Lead sulfochromate yellow Potassium chromate, Potassium dichromate, Sodium chromate, Sodium dichromate. Substances subject to REACH Authorization - Trichloroethylene Altered restriction levels for DBP, DIBP, DEHP, and BBP. Removed PFOAs. Table 2 Dichloromethane - added prohibition for paint strippers. Pentachlorophenol - Added prohibitions for Substances and Mixtures. Added Substances subject to REACH Authorization. Added Vinyl chloride in aerosol dispensers. Table 4 Added Small brominated alkyl alcohols, gas discharge lamps, pressurized gas, PFOAs, and springs. Removed radioactive substances and Hexamethylene diacrylate. Section 2.2.3 - Removed general prohibition for authorized SVHCs in Articles. Added requirement for authorization for Articles produced in the EU/EFTA. Table 5 -Added authorized SVHCs - 4,4'-diaminodiphenylmethane, Diarsenic pentaoxide, Diarsenic trioxide 2,4-Dinitrotoluene, Trichloroethylene Section 2.3.1 - New labeling requirements for California Prop 65 added. Section 2.12.1 New China Energy Labeling requirements added for monitors, replacing previous energy labeling requirements. Annex NN updated with new SVHC and authorized SVHCs, added CAS numbers for Sodium perborate entry. Annex OO - removed prohibited reference and removed NN-dimethylacetamide. Annex XX - added. Definitions added "Chemical". Section 2.1.1 Removed requirement for no use of PVC or TBBA in system enclosures. Table 1 Added restriction for cadmium in paint for Articles. Restriction for substance and preparations added and additional restriction for articles for HBCDD. Additional restriction for Lead and lead compounds, Dibutyltin (DBT) compounds, PBDEs, and Dioctyltin (DOT) compounds in chemicals. Added Tris (1,3dichloro-2-propyl) phosphate. Exemption added for pigments for nanomaterials. Table 2 - Additional restriction for chlorinated solvents and Trichlorobenzene as a chemical. Added pentachlorophenol. Section 2.2.2 Reference to standard EN 14582 removed and replaced with IEC 62321-3-1 and 62321-3-2 for EPEAT qualified products. Table 4 Removed - 1,3-propanesultone, UV-327, UV-350, TDCPP, Perfluorononan-1-oic-acid and its sodium and ammonium salts. Table 5 Added - 1,3-propanesultone, UV-327, UV-350, Nitrobenzene, Perfluorononan-1-oic-acid and its
PN 46G3772 Page 162 of 197 EC J85151 13MAY05
EC 899569 04NOV93 EC G32590 08FEB06
EC 899773 07DEC94 EC L04925B 11JAN07
EC F15040 25AUG97 EC L04925M 01AUG07
EC F73298 02SEP99 EC L04925N 19FEB08
EC F74336 05SEP00 EC L05962X 08AUG08
EC F72950 23JAN02 EC L79598 25FEB09
EC H64064 13MAY03 EC N24534E 02OCT09
EC H17205 29JUL03 EC L79598A 22FEB10
EC L79598B 22SEPT10
EC L79598C 27APR2011
EC L79598D 6SEPT2011
EC N31517Y 26MAR2012
ECN31946T 19APR2013
ECN33076 5DEC2013
ECN33076A 16MAY2014
ECN46883 17OCT2014
ECP02692 26MAY2015
ECO P02838 15OCT2015
ECOP17505 21APR2016
ECO P17633 1OCT2016
ECOP17764 20MAR2017
ECOP17905 16OCT2017
ECOP17958 Jan 25, 2018
ECOP44540 June 11, 2018
ECOP44680 Mar 5, 2019
ECOP44794 Aug 9, 2019
ECO P44877 15Feb2020
ECO P45188 1Sept2020
ECO P45272 9Mar2021
ECO P45379 18Oct2021
ECO 45443 4April2022
ECO P45475 14Nov2022
This document is the property of IBM. Its use is authorized only for responding to a request for quotation or for the performance of work for IBM. All questions must be referred to the IBM Procurement Department requesting the quotation or performance of work.
Engineering Specification
Page 163 of 197
Date
2015-10-15
2015-05-22
EC Level
P02838
P02692
Change Summary
sodium and ammonium salts Section 2.4.2 Requirement added for submission of test reports or certifications within 2 business days. Table 9 - Costa Rica, Norway, and Taiwan added. Section 2.9.1 - Reference to new China Order added. Section 2.9.2 Added. Section 2.12.11 Updated and simplified by compiling all requirements into one section Section 2.14 DoC information updated for the Republic of Srpska Annex NN 5 new SVHCs added Section 1.2 - Definitions Updated definition of Article and RoHS Substances. Table 1 Added nanomaterials. Tris-(aziridinyl) phosphineoxide, Tris (2,3 dibromopropyl) phosphate and Cadmium - added prohibition for Substances and Preparations. Changed authorized SVHCs to restrictions at the Article level rather than at the Deliverable. Additional restriction added for Hexachloroethane and Nonylphenol ethoxylates. Table 2 Added Isopropyl alcohol, Nonylphenols, Tetraethyl lead, and Tetramethyl lead. Additional definition of nanomaterial added. Table 3 4 phthalates added for new RoHS requirements. Section 2.2.2 - European Standard EN 14582 reference for products certifying to EPEAT standard for computer servers. Table 4 Removed (moved to Table 1 or 5) 2-benzotriazol-2-yl-4,6-di-tert-butylphenol (UV-320), 2-(2H-benzotriazol-2yl)-4,6-ditertpentylphenol (UV-328), 4, 4'-Diaminodiphenylmethane (MDA), 2, 4-Dinitrotoluene, Nanomaterials, Perfluorooctanoic acid, Arsenic pentoxide, Arsenic trioxide, Hydrazine Added 2-(2H-benzotriazol-2-yl)-4-(tert-butyl)-6-(sec-butyl)phenol (UV-350), Dicyclohexyl phthalate 2,4-di-tert-butyl-6-(5- chloro benzotriazol -2-yl) phenol (UV-327), Hexamethylene diacrylate, Perfluorononan1-oic acid (2,2,3,3,4,4,5,5,6,6,7,7,8,8,9,9,9-heptadecafluorononanoic acid and its sodium and ammonium salts 1,3-propanesultone Section 2.2.3 The term "Deliverable" has been replaced with "Article" and a note added referring to the September 10, 2015 ruling from the EU Court of Justice. Table 5 Added 1,2-benzenedicarboxylic acid, di-C6-10-alkyl esters; 1,2-benzenedicarboxylic acid, mixed decyl and hexyl and octyl diesters with > 0.3% of dihexyl phthalate. Section 2.3.1 C Mark requirement added. Table 8 Prohibited Zinc silver oxide, zinc air and zinc manganese dioxide button batteries Section 2.9 Clarification for geography. Section 2.10 Removed requirement for battery notice for Czech Republic. Section 2.12.13 amended for EU Regulation 2015/1428. Section 2.14.3 new label required for the Republic of Srpska. Section 4 Removed. Annex NN Updated. Annex OO "Deliverable" replaced with "Article" in Title Annex WW Added. Table 1 Restriction on Azocolourants updated. Allowance for cadmium in electrical contacts removed. Annex citation for Perfluorinated compounds corrected. PFOAs restriction added. Legal reference for Benzidine-based chemicals added. Additional restrictions for BBP, DEHP, DBP and DIBP. Nonylphenol ethoxylates added. Table 2 Annex citation for MDI corrected. Table 3 Allowance for mercury use in lamps removed. Table 4 - PFOA entry modified. Toluene Diisocyanates added. PFCA added. Specific entries added for brominated and chlorinated substances in printed wiring board laminates at 900ppm. Lead reporting entry added for cable jacketing concentrations from 300 to 1000ppm and lead acid batteries. Postconsumer recycled plastic added. Table 5 - Added UV-320, UV-328, cadmium fluoride, cadmium sulphate, DOTE, and reaction mass of DOTE and MOTE. Table 8 Mercury allowance listed for homogeneous material in all battery types, for new Canada regulation. Cadmium restricted level for all battery types lowered to 0.001%. Section 2.6 Updated with new labeling requirements for Canada. Mercury containing CCFLs not allowed for new PNs. Section 2.12.2 New standard reference for EPS testing EN 50563:2011 / A1: 2013. New requirements added for the US. Section 2.12.9 Updated with new requirements for Ecuador. Section 2.12.11 Updated with a reference to new British Columbia requirements for small battery chargers. Section 2.12.12 - New requirements for OEM designed computer servers (4 or less processor sockets). Section 2.15 Updated with information and citation for new EU regulation for fluorocarbons. Section 2.16 Added for OEM designed Computer servers (4 or less processor sockets). Annex P Additional examples added. Annex Z Updated with additional PFOA CAS numbers.
PN 46G3772 Page 163 of 197 EC J85151 13MAY05
EC 899569 04NOV93 EC G32590 08FEB06
EC 899773 07DEC94 EC L04925B 11JAN07
EC F15040 25AUG97 EC L04925M 01AUG07
EC F73298 02SEP99 EC L04925N 19FEB08
EC F74336 05SEP00 EC L05962X 08AUG08
EC F72950 23JAN02 EC L79598 25FEB09
EC H64064 13MAY03 EC N24534E 02OCT09
EC H17205 29JUL03 EC L79598A 22FEB10
EC L79598B 22SEPT10
EC L79598C 27APR2011
EC L79598D 6SEPT2011
EC N31517Y 26MAR2012
ECN31946T 19APR2013
ECN33076 5DEC2013
ECN33076A 16MAY2014
ECN46883 17OCT2014
ECP02692 26MAY2015
ECO P02838 15OCT2015
ECOP17505 21APR2016
ECO P17633 1OCT2016
ECOP17764 20MAR2017
ECOP17905 16OCT2017
ECOP17958 Jan 25, 2018
ECOP44540 June 11, 2018
ECOP44680 Mar 5, 2019
ECOP44794 Aug 9, 2019
ECO P44877 15Feb2020
ECO P45188 1Sept2020
ECO P45272 9Mar2021
ECO P45379 18Oct2021
ECO 45443 4April2022
ECO P45475 14Nov2022
This document is the property of IBM. Its use is authorized only for responding to a request for quotation or for the performance of work for IBM. All questions must be referred to the IBM Procurement Department requesting the quotation or performance of work.
Engineering Specification
Page 164 of 197
Date
2014-10-17 2014- 05-16
2013-12-05
EC Level
N46883 N33076A
N33076
Change Summary
Annex LL Added 2 additional PAHs. Annex NN Added DOTE, UV-320, Reaction mass of DOTE and MOTE, cadmium fluoride, cadmium sulphate, UV-328, and lead dipicrate. Annex UU Added. Annex VV Added. Section 1.2 Added definitions for Agglomerate, Aggregate, and Particle. Table 1 Mercury use in lamps prohibited. Additional lead restriction for paints, enamels, varnishes, inks and lacquers. Additional restrictions added for HFCs. Fluorinated and perfluorinated compounds added. Exemption for rubber added for BNST. Table 4 - HFCs removed. 2-benzotriazol-2-yl-4, 6-di-tert-butylphenol (UV-320) and 2-(2H-benzotriazol-2-yl)4,6-ditertpentylphenol (UV-328) added. Table 5 New SVHCs added- 1, 2-Benzenedicarboxylic acid, dihexyl ester, branched and linear and cadmium chloride. Table 12 MFD, Printers and POS products removed. Section 2.9.1 Updated as applicable due to the transition from Standard SJ/T 11363-2006 to Standard GB/T 26572-2011 per the China marking standard SJ/T 1164-2014. Section 2.9.2.1 China Standard reference updated. Allowance to have the Mark 1 logo in product instructions only removed. DOM marking requirement updated. Section 2.9.2.2 Reference to China HST table now in ENUG. HST table requirements updated. Section 2.12.1 Definition of computer monitor altered for Australia requirements. Section 2.12.7 US requirements for single phase motors updated. Requirements for 3 phase motors removed. Section 2.14.3 Requirement added to place IBM SPOC on products where IBM is listed as manufacturer. Section 2.15 Additional languages required for labels. Annex K Substances added. Annex L Updated with additional synonyms. Annex JJ Additional substances added. Annex NN Authorized substances removed. New SVHCs added. Annex SS Added. Annex TT Added. Table 1 Annex changed for Benzidine and compounds to QQ. "Articles containing leather parts" added in entry for hexavalent chromium. Table 2 Entry for Carcinogens, Mutagens, and Reproductive toxicants deleted as they were duplications for another entry. Entry for 2-butoxyethanol updated. Table 4 Added - cobalt dichloride, cobalt metal, cobalt sulfate, 2, 3-Dibromo-1-propanol (was in brominated flame retardant category before), dibromoneopentyl glycol (was in brominated flame retardant category before), indium phosphide, nanomaterials, nickel sulfamate, nickel sulphate, nonylphenols and refractory ceramic fibers. Diethyl phthalate was given a separate entry from the general phthalate category, and beryllium (CAS 7440-417) was given a separate entry from the general beryllium/beryllium compounds entry. Arsenic pentaoxide and arsenic trioxide each given a separate entry from the general arsenic/arsenic compounds entry. Reporting level for HBCDD changed from 1000 ppm to 50 ppm. Table 5 - Lead titanium trioxide now specifically listed here rather than just in Annex NN. Cadmium sulphide and DNHP added. Table 8 Exemptions for mercury level for button cell batteries removed. Section 2.3.1 Reference in Section "California Safe Drinking Water and Toxic Enforcement Act" ISN-CAP54 changed to ISN-CAP65. Clarification added that only the CE mark may be used to demonstrate conformity to an EU CE mark legislation. Section 2.4.2 Requirements added for labeling batteries for Ecuador. Instructions for battery removal now refers to removal by a qualified professional. The removal instructions must accompany the product or refer to the location of the removal instructions. Section 2.8.2 Requirement added to send information about reading a coded DOM. Section 2.10 Further clarification for switches and routers that require an IBM ENUG. Section 2.12 Multiple sections updated with reference and requirements for energy regulations in Jordan. Section 2.12.2 Reference to Oregon rule added. Scope of EPSs altered with publication of EU Regulation 617/2013 for computer and computer servers. Section 2.12.7 Scope of EU ERP regulation for motors altered. Annex U Arsenic trioxide and arsenic pentoxide removed as these substances now have specific entries on Table 4. Annex V- Title changed to Beryllium Compounds. Beryllium removed since it now has its own entry on Table 4. Additional CAS number added for beryllium carbonate. Annex MM Additional examples added for perchlorates. Annex NN New SVHCs listed. Annex RR Added. Section 1.2 Added definition of EEE. Table 1 Added acids generated from chromium trioxide and their oligomers, ammonium dichromate, biocidal
PN 46G3772 Page 164 of 197 EC J85151 13MAY05
EC 899569 04NOV93 EC G32590 08FEB06
EC 899773 07DEC94 EC L04925B 11JAN07
EC F15040 25AUG97 EC L04925M 01AUG07
EC F73298 02SEP99 EC L04925N 19FEB08
EC F74336 05SEP00 EC L05962X 08AUG08
EC F72950 23JAN02 EC L79598 25FEB09
EC H64064 13MAY03 EC N24534E 02OCT09
EC H17205 29JUL03 EC L79598A 22FEB10
EC L79598B 22SEPT10
EC L79598C 27APR2011
EC L79598D 6SEPT2011
EC N31517Y 26MAR2012
ECN31946T 19APR2013
ECN33076 5DEC2013
ECN33076A 16MAY2014
ECN46883 17OCT2014
ECP02692 26MAY2015
ECO P02838 15OCT2015
ECOP17505 21APR2016
ECO P17633 1OCT2016
ECOP17764 20MAR2017
ECOP17905 16OCT2017
ECOP17958 Jan 25, 2018
ECOP44540 June 11, 2018
ECOP44680 Mar 5, 2019
ECOP44794 Aug 9, 2019
ECO P44877 15Feb2020
ECO P45188 1Sept2020
ECO P45272 9Mar2021
ECO P45379 18Oct2021
ECO 45443 4April2022
ECO P45475 14Nov2022
This document is the property of IBM. Its use is authorized only for responding to a request for quotation or for the performance of work for IBM. All questions must be referred to the IBM Procurement Department requesting the quotation or performance of work.
Engineering Specification
Page 165 of 197
Date
2013-04-19
EC Level
N31946T
Change Summary
product, chromium trioxide, hexavalent chromium restriction for leather, potassium chromate, potassium dichromate, sodium chromate, sodium dichromate, and trichloroethylene. Table 4 - Added TCPP. Table 5 Added APFO, cadmium, cadmium oxide. Removed ammonium dichromate, chromic acid, chromium trioxide, potassium chromate, potassium dichromate, sodium chromate, sodium dichromate, and trichloroethylene. Section 2.3.1 Clarification for perchlorate notification requirements and prototype labeling. Removed requirement for RoHS label for Turkey. Section 2.4.2 - Updates for Brazil testing requirements. New requirements added for alkaline and non-alkaline zine manganese oxide batteries. Section 2.8 - Updates for Peru and Serbia. Clarified marking requirements. Section 2.9.2.2 - Remove "or Part" from sentences requiring an HST table. Section 2.10 Clarifications provided for requirements for shipping the ENUG. Section 2.11 Removed. Section 2.12.1 Update for A/NZ requirements for monitors. Update scope for EU Regulation 1275/2008. Section 2.12.14 added for EMC Class B equipment, monitor and modem section referenced to this section. Addition of Vietnam requirements. Section 2.12.2 Clarification for Canada, EPSs only used internal to a rack system are out of scope. EPS definition amended for EU 278/2009. EPS section reformatted. Sections 2.12.3 and 2.12.4 - Updated with new amendment changes for EU requirements. Section 2.12.5 and 2.12.6 - Updated EU section with new amendment requirements. Section 2.12.7 Added US requirement for certification document. Section 2.12.8 - Water pumps - additional EU Commission communication referenced for testing. Section 2.12.11 - Updated with reference to Oregon requirements. Section 2.12.12 - Updated A/ NZ requirements. Added new EU requirements for servers. Section 2.12.14 - Added. Section 2.14.2 - Added examples. Annex A - Added 2 additional entries for asbestos. Annex K 5 additional ozone depleting chemicals listed. Annex NN Added new SVHC substances Annex OO Added new REACH authorized substances. Table 1 MDI CAS numbers expanded; Benzidine expanded to include all compounds; cadmium prohibitions expanded to all resins; dimethylfumarate prohibition expanded to Articles; Added - benzenamine, N-phenyl, hexachlorobenzene, 2-methoxyethanol, phthalates summation of 4 prohibited, Polychlorinated napthalenes, polycyclic aromatic hydrocarbons, substances subject to REACH Authorization, tetrachlorobenzenes. Table 2 PIC chemicals added; polychlorinated napthalenes moved to Table 1, Nanoparticle substances added. Section 2.2 Reference to EN 50581:2012 added. Table 4 Hydrazine, TBPH, and TBB added. Benzenamine, N-phenyl, hexachlorobenzene, and polychlorinated napthalenes moved to Table 1. BBP, DEHP, DBP, and DIBP moved to Table 1. Table 5 Arsenic acid, bis (2-methoxyethyl) ether, 2,2'-dichloro 4,4' methylenedianiline, NNdimethylacetamide, formaldehyde, oligomeric reaction products with aniline, and Strontium chromate moved to REACH Authorization status and thus to Table 1. Additional REACH SVHCs added to Table 5 either listed specifically in Table 5 or in Annex NN. The substances specifically listed in Table 5, because there is a potential for their presence in IT equipment, include diboron trioxide, diisopentylphthalate, EGDME, fatty acids C16-18 lead salts, lead monoxide, lead oxide sulphate, orange lead, phthalate (2- ) dioxotrilead, pyrochlore, and tetralead trioxide sulphate. Section 2.3.1 Requirement for labeling engineering prototypes added. Section 2.4.2 Clarification for size of heavy metal symbol for EU battery labeling. Requirement for manufacturer registration in WI for zinc air button cell batteries. Update for requirements for Brazil labeling. Section 2.8.1 Reference to new EU WEEE Directive. Requirements for Nigeria, Peru, and Turkey added. Clarification that electronic tools require a WEEE label. Section 2.9.1 Further description for selling parts and products commercially. Section 2.10 Additional examples given which require the ENUG. Section 2.12.1 Korea energy requirements updated. Requirements for A/NZ added. Section 2.12.2 and 2.12.7 Technical documentation in Romanian required. Section 2.12.7 Requirements for USA added. Section 2.12.8 Requirements for EU, Norway, and Turkey changed from EU Regulation 641/2009 to EU Regulation 547/2012. Section 2.12.9 Added - Technical documentation must be provided to IBM. CE marking, and DoC clarified. Section 2.12.12 Requirements for A/NZ for Computers and Small Scale Servers added. Section 2.12.13 Added. Section 2.14 Clarified with requirements for Finished Products and parts. Info for EN50581:2012 added. DoCs for Finished Products must be provided to IBM. Clarification for CE marking added. Section 2.15 Added.
PN 46G3772 Page 165 of 197 EC J85151 13MAY05
EC 899569 04NOV93 EC G32590 08FEB06
EC 899773 07DEC94 EC L04925B 11JAN07
EC F15040 25AUG97 EC L04925M 01AUG07
EC F73298 02SEP99 EC L04925N 19FEB08
EC F74336 05SEP00 EC L05962X 08AUG08
EC F72950 23JAN02 EC L79598 25FEB09
EC H64064 13MAY03 EC N24534E 02OCT09
EC H17205 29JUL03 EC L79598A 22FEB10
EC L79598B 22SEPT10
EC L79598C 27APR2011
EC L79598D 6SEPT2011
EC N31517Y 26MAR2012
ECN31946T 19APR2013
ECN33076 5DEC2013
ECN33076A 16MAY2014
ECN46883 17OCT2014
ECP02692 26MAY2015
ECO P02838 15OCT2015
ECOP17505 21APR2016
ECO P17633 1OCT2016
ECOP17764 20MAR2017
ECOP17905 16OCT2017
ECOP17958 Jan 25, 2018
ECOP44540 June 11, 2018
ECOP44680 Mar 5, 2019
ECOP44794 Aug 9, 2019
ECO P44877 15Feb2020
ECO P45188 1Sept2020
ECO P45272 9Mar2021
ECO P45379 18Oct2021
ECO 45443 4April2022
ECO P45475 14Nov2022
This document is the property of IBM. Its use is authorized only for responding to a request for quotation or for the performance of work for IBM. All questions must be referred to the IBM Procurement Department requesting the quotation or performance of work.
Engineering Specification
Page 166 of 197
Date EC Level
Change Summary
2012-03-26 N31517Y 2011-09-06 L79598D 2011-04-27 L79598C
Annex NN Updated. Annex OO Added. Annex PP Added. Annex QQ Added. Table 1 - CAS number for Dimethylfumarate changed from 210-849-0 to 624-49-7. Additional restrictions listed for pentachlorophenol. Table 4 Added 2-Butanone oxime and n-Butyl glycidyl ether. Section 2.2 Reference to requirement for testing of RoHS substances to be in accordance with EN 62596. Section 2.2.3 Revised to refer to a new Annex which lists all SVHC substances as listed at the time of release of this specification. Table 5 The following substances were added: arsenic acid, Bis(2-methoxyethyl)ether, Bis(2-methoxyethyl) phthalate, 2,2'-dichloro-4,4'-methylenedianiline, N,N-dimethylacetamide, Formaldehyde, oligomeric reaction products with aniline. Section 2.8.1 India and Macedonia added as jurisdictions requiring the WEEE label. Section 2.12.1 Requirements for Norway, Israel, and Turkey added. Section 2.12.2 Definition of Consumer Product updated. Web site for US DOE requirements for EPSs and battery chargers updated. Requirement for Norway and Turkey added. Requirements for Canada revised. Section 2.12.3 Requirements for Norway and Turkey added. Section 2.12.4 Requirements for Norway and Turkey added. Section 2.12.7 Requirements for Norway, Israel, Turkey, and Canada added. Section 2.12.8 Requirements for Norway and Turkey added. Section 2.12.9 Requirements for Norway added. Section 2.12.10 Added. Section 2.12.11 Added. Section 2.12.12 Added. Section 2.14 Added. Annex NN Added. Section 1.2 Definitions of Homogeneous Material, RoHS and RoHS substances updated to reflect new RoHS recast Directive. Table 1 Restrictions for PFOS changed. Additional restriction for cadmium in brazing fillers added. Added DBP, BBP and DEHP. Table 4 Added tetrabutyltin, 4, 4'-diaminodiphenylmethane, 2,4-dinitrotoluene, polychlorinated naphthalenes and Benzenamine, N-phenyl-, reaction products with styrene. Table 5 Updated CAS numbers for chromic acid. Moved dichromic acid to row with chromic acid to reflect the ECHA list of SVHCs. Added DIHP. Removed DBP, BBP and DEHP and placed them in Table 1. Table 8 Mercuric oxide button cell batteries prohibited. Section 2.4.2 Added Macedonia as requiring the EU battery graphic. Section 2.8.1 and 2.8.2 Removed IBM requirement for "EU Only" on WEEE label. Figure 5 Remove IBM requirement for "EU Only" on WEEE label Section 2.12.2 Added definitions battery charger and consumer product. Added testing requirement for EPS and battery chargers for US requirements. Section 2.12.9 Removed submission requirements to IBM for limited documentation. Annex I Additional mercury compounds added for clarity. Annex R Additional naphthalene compounds added. Table 1 - The following SVHC were placed on Table 1 as prohibited 4,4' diaminodiphenylmethane, hexabromocyclododecane, diisobutylphthalate, diarsenic trioxide, diarsenic pentaoxide, lead chromate, lead sulfochromate yellow, lead chromate molybdate sulphate red, tris (2-chloroethyl) phosphate, and 2,4dinitrotoluene. Section 2.2 Supplier documentation required to be maintained for 10 years. Section 2.2.2 Reporting requirements clarified. Table 4. PVC reporting level changed to 1000ppm in a homogeneous material. Clarifications that some of the substances have restricted levels or applications found in the other tables. Table 5 The following SVHC were move to Table 1 as prohibited 4,4' diaminodiphenylmethane, hexabromocyclododecane, di-isobutylphthalate, diarsenic trioxide, diarsenic pentaoxide, lead chromate, lead sulfochromate yellow, lead chromate molybdate sulphate red, tris (2-chloroethyl) phosphate, and 2,4dinitrotoluene. The following were added: 1,2-benzenedicarboxylic acid, di-C 6-8- branched alkyl esters, C7-rich (DIHP), 1,2-benzenedicarboxylic acid, di-C 7-11- branched and linear alkyl esters (DHNUP), chromic acid, chromium trioxide, cobalt carbonate, cobalt diacetate, cobalt dinitrate, cobalt sulphate, dichromic acid, 2ethoxyethanol, 2-ethoxyethyl acetate, hydrazine, 2-methoxyethanol, 1-methyl-2-pyrrolidone, strontium chromate, and 1,2,3-trichloropropane. Note added that IBM plans to prohibit the use of BBP, DEHP and DBP in the 4Q2011 release of this specification. Section 2.3.1 Requirement added for product compliance identification number. Section for California Best Management Practices for Perchlorate Materials added. Section 2.4.2 Capacity rating labeling (Ah) required for all batteries except coin and small primary cylindrical.
PN 46G3772 Page 166 of 197 EC J85151 13MAY05
EC 899569 04NOV93 EC G32590 08FEB06
EC 899773 07DEC94 EC L04925B 11JAN07
EC F15040 25AUG97 EC L04925M 01AUG07
EC F73298 02SEP99 EC L04925N 19FEB08
EC F74336 05SEP00 EC L05962X 08AUG08
EC F72950 23JAN02 EC L79598 25FEB09
EC H64064 13MAY03 EC N24534E 02OCT09
EC H17205 29JUL03 EC L79598A 22FEB10
EC L79598B 22SEPT10
EC L79598C 27APR2011
EC L79598D 6SEPT2011
EC N31517Y 26MAR2012
ECN31946T 19APR2013
ECN33076 5DEC2013
ECN33076A 16MAY2014
ECN46883 17OCT2014
ECP02692 26MAY2015
ECO P02838 15OCT2015
ECOP17505 21APR2016
ECO P17633 1OCT2016
ECOP17764 20MAR2017
ECOP17905 16OCT2017
ECOP17958 Jan 25, 2018
ECOP44540 June 11, 2018
ECOP44680 Mar 5, 2019
ECOP44794 Aug 9, 2019
ECO P44877 15Feb2020
ECO P45188 1Sept2020
ECO P45272 9Mar2021
ECO P45379 18Oct2021
ECO 45443 4April2022
ECO P45475 14Nov2022
This document is the property of IBM. Its use is authorized only for responding to a request for quotation or for the performance of work for IBM. All questions must be referred to the IBM Procurement Department requesting the quotation or performance of work.
Engineering Specification
Page 167 of 197
Date EC Level
Change Summary
201009-22 L79598B 2010-02-22 L79598A 2009-10-02 N24534E
IEC Standard 60086-2 naming for button cell batteries referenced as acceptable for battery type and chemistry labeling. Section 2.8.1 WEEE marking required for Buenos Aires, Argentina. Section 2.8.2 Serbia added as a jurisdiction requiring the year of manufacture. Section 2.10 Requirement for hard copy notice added for battery take back information for the Czech Republic. Section 2.12.1 Requirement for EU DoC and technical documentation for monitors to be in Turkish. Section 2.12.2 - Deleted requirement to put EPS information in packaging when sent as a service part. Changed requirement for EU, Switzerland, and Liechtenstein to apply to only EMC Class B EPSs. The EU DoC must cite a second EU regulation 278/2009. Format for technical documentation provided. EU DoC and technical documentation must be provided in Turkish. Requirements added for Canada. Section 2.12.7 CE Mark and DoC requirements added for motors. Section 2.12.8 CE Mark and DoC requirements added for circulators. Section 2.12.9 Section added for fans. Annex MM Added. Table 1- Added acrylamide. Changed restrictions for Decabromo diphenyl ether, no deminimus allowed. Toluene removed from Table 1 and placed in Table 2. Table 2- Added 2-butoxyethanol and toluene. Table 4 Removed antimony trioxide from antimony category and placed in its own category. Changed the name of butyl benzyl phthalate to benzyl butyl phthalate. Created a category for beryllium copper alloys and this removed the reporting of these substances in the general beryllium category. Added p-Dichlorobenzene, di-nhexyl phthalate, formaldehyde (for different applications from the restricted applications in Table 1), hexachlorobenzene, n-hexane, polycyclic aromatic hydrocarbons, 1,2,3-trichlorobenzene, 1,2,4trichlorobenzene, tris(1,3-dichloro-2-propyl)phosphate, tris(2-chloroethyl)phosphate, tris(2,3dirbromopropyl)phosphate, and vinyl chloride. Created a new category for tetrabromobisphenol A and removed it from reporting in the brominated flame retardant category. Table 5- Added acrylamide, ammonium dichromate, boric acid, potassium chromate, potassium dichromate, sodium chromate, and tetraboron disodium heptaoxide, hydrate. Changed disodium tetraborate decahydrate to disodium tetraborate anhydrous. Section 2.12.2- Added US requirements for external power supplies. Section 2.12.7- Added Australia and New Zealand requirements for motors. Section 2.12.8- Added. Section 2.13- Added. Annex LL Added. Section 1.2 Definition of Mixture added. Section 1.5 Reference to specifications 26P0381 and 77P0594 removed. Reference to PQA 873444 and Specification 5897660 added. Table 1 Added DEGBE, DEGME, DEGBE, Hydrofluorocarbons, Monomethyl-tetrachlorodiphenyl methane, monomethyl-dichloro-diphenyl methane, DBBT, nitrogen trifluoride, pentachlorobenzene,, and Sulphur hexafluoride. Additional restrictions added for Perfluorocarbons. PFOS and toluene restrictions slightly altered. Dibutyltin compounds listed in Annex KK. Table 2 Carcinogens, Cyclohexane, Methylenediphenyl diisocyanate, Mutagens and Reproductive toxicants added. "Xenylamine" added to the substance name for "4-Aminobiphenyl". Table 4 Reporting for chlorinated flame retardants now required for all products and parts, not just storage. Bis (2-ethylhexyl) phthalate (DEHP) changed to Di (2-ethylhexyl) phthalate to reflect naming scheme for EU regulations. CAS number remains the same. Added DIBP, DIDP, DINP, DnOP, DnPP, bisphenol A, and long chained chlorinated paraffins. Section 2.2.3 - The word "Proposed" removed from the five Anthracene oil substances and Coal tar pitch. Additional proposed SVHC added Residues (coal tar), pitch distn, Distillates (coal tar), heavy oils, Distillates (coal tar), heavy oils pyrene fraction, and Distillates (coal tar), pitch, pyrene fraction. Table 5 A customer communication is required for Deliverables to IBM in the EU for the substances with an asterisk. Trichloroethylene and Disodium tetraborate decahydrate added. Section 2.4.2.7 Deleted. Section 2.10 Customer Environmental Notices and User Guide required to ship with whole unit replacement parts. Section 2.12.5.1 Information must be included in a product catalog. Section 2.12.6.1 Information must be included in a product catalog. Section 2.12.7 - Added for motors. Annexes G, H, L, X, CC, EE, FF Additional substances added. Annexes JJ, KK Added. Section 1.2 Definitions - The definition for "Field Use Material", "Frequently Handled Cables", and "Chemical Product Supply" was added. Clarification made for definition of Deliverable to include tools. Section 2.1.1 - Clarification added that if a substance appears multiple times in Tables and Annexes the more restrictive level applies. Entries for Benzidine and PCBs clarified. PVC prohibition in system enclosures
PN 46G3772 Page 167 of 197 EC J85151 13MAY05
EC 899569 04NOV93 EC G32590 08FEB06
EC 899773 07DEC94 EC L04925B 11JAN07
EC F15040 25AUG97 EC L04925M 01AUG07
EC F73298 02SEP99 EC L04925N 19FEB08
EC F74336 05SEP00 EC L05962X 08AUG08
EC F72950 23JAN02 EC L79598 25FEB09
EC H64064 13MAY03 EC N24534E 02OCT09
EC H17205 29JUL03 EC L79598A 22FEB10
EC L79598B 22SEPT10
EC L79598C 27APR2011
EC L79598D 6SEPT2011
EC N31517Y 26MAR2012
ECN31946T 19APR2013
ECN33076 5DEC2013
ECN33076A 16MAY2014
ECN46883 17OCT2014
ECP02692 26MAY2015
ECO P02838 15OCT2015
ECOP17505 21APR2016
ECO P17633 1OCT2016
ECOP17764 20MAR2017
ECOP17905 16OCT2017
ECOP17958 Jan 25, 2018
ECOP44540 June 11, 2018
ECOP44680 Mar 5, 2019
ECOP44794 Aug 9, 2019
ECO P44877 15Feb2020
ECO P45188 1Sept2020
ECO P45272 9Mar2021
ECO P45379 18Oct2021
ECO 45443 4April2022
ECO P45475 14Nov2022
This document is the property of IBM. Its use is authorized only for responding to a request for quotation or for the performance of work for IBM. All questions must be referred to the IBM Procurement Department requesting the quotation or performance of work.
Engineering Specification
Page 168 of 197
Date EC Level
Change Summary
2009-02-25 L79598
clarified to include resin blends containing PVC. Table 1. Clarification added for lead in Frequently Handled Cables. Additional requirements for formaldehyde in textiles added. Dimethylfumarate CAS No. 210-849-0 added. Entry for DecaBDE edited for 2009 amendment to a Maine law, now with a deminimus level and for 2009 Oregon Senate Bill 596. DBT, DOT, TBT and TPT added. References to restrictions from the EU Marketing and Use Directive now changed to the EU REACH regulation. Table 4. Medium chained short chlorinated paraffins, DEHP, BBP, DBP, and HBCDD added. Table 5. Another CAS number added for Hexabromocyclododecane. Additional entries for the new proposed chemicals to the candidate list acrylamide, aluminosilicate, zirconia aluminosilicate, DIBP, 2,4dintitrotoluene, lead chromate, lead chromate molybdate sulphate red, lead sulfochromate yellow and tris(2chloroethyl) phosphate. Five anthracene substances and one coal tar pitch substance were not added to Table 5 but mentioned in the text of the section. Section 2.3.1.2 California Safe Drinking Water and Toxic Enforcement Act - Changed from IBM may - to IBM will require a laboratory analysis to document lead concentration for Frequently Handled Cables. More detail added for lead use in Frequently Handled cables and a list of cables which are considered Frequently Handled. Section 2.3.1.3 Section added for Marking packaging for RoHS compliance for Turkey. Section 2.4.2 MSDS requirements added for Deliverables containing lead acid batteries. Section 2.4.2.1 Testing requirement added for Turkey requirements. Table 8. Reorganized by battery type for clarity. Added restrictions for silver oxide, alkaline manganese and zinc-air button cell batteries all containing mercury. Additional restrictions for zinc manganese batteries. Section 2.4.2.6 Requirement added for information included in the packaging for batteries in Brazilian Portuguese for battery information. Section 2.4.2.7 Added. Section 2.6 Information about tube length is needed for CCFLs. Section 2.10 Requirement for Croatia WEEE notice added. Section 2.12.1.3 Added for EU and Switzerland requirements. Section 2.12.2.1.2 Requirements Certification in Oregon added for External Power Supplies. Section 2.12.2.2.2 Requirements Label for Korea updated to reflect new Korean law. Section 2.12.3 to 2.12.6 Added for laptops, workstations, switches and routers. Annexes Multiple additions to CAS numbers in Annexes. Annex O Beryllium oxide deleted because it has its own entry on Table 4.
Annex AA. Additional Phthalate substances added for reference.
Section 1.1 Objective - Clarification provided that Deliverables without certain types of parts would not need to meet the requirements for those parts, e.g. Deliverables without batteries do not need to meet the requirements for batteries in Section 2.5. Section 1.2 Definitions - The definition for "Not detected" was altered. Section 1.5 - Additional IBM Procurement RoHS specifications cited. Section 2.1.1 - Additional PVC requirement - Bezels for Storage products must not use PVC Table 1 - Entry for Azo colorants was clarified. Level for Azodyes which may release aromatic amines was lowered to 30ppm and restriction applies to textiles and leather in direct and prolonged contact with skin. Mercury exceptions amended to include unavoidable impurity at levels below 10ppm. Added - Phenol, 2- (2H benzotriazol -2-yl) - 4, 6-bis (1, 1- dimethylethyl)- (CAS No 96-29-7). Another prohibition added for formaldehyde releasing into the air at or above 0.1ppm. An exception was added for mercury as an unavoidable impurity at levels below 10 ppm. Restricted mercury levels in CCFLs are now listed. Table 2 - Clarification made for trichloroethylene and tetrachloroethylene where prohibition also applies to adhesives, paints and cleaning agents. 2, 4,6-Tri-tert-butylphenol added. Formaldehyde prohibited above 0.1% in mixtures or solutions. Table 4 - Chlorinated flame retardants added at 1000ppm in a homogeneous material for Storage products. Brominated flame retardant reporting level changed to homogeneous material. Tributyltin and triphenyltin compounds added for Articles and mixtures. Dibutyltin compounds, dioctyltin compounds, perchlorates, and sulphur hexafluoride added. Toluene added as reportable for uses besides adhesives and spray paints. All HFCs are reportable. Table 5 - CAS numbers added for sodium dichromate and Hexabromocyclododecane to correspond with the published SVHC Candidate List. Cyclododecane removed. Section 2.3 - Words added to provide timeline for submission of PCDs. Section 2.4.1.1 - Requirement for a logo was clarified for Products. Table 9 - Battery Management Plan requirement for Brazil, EU, Croatia and Turkey. Section 2.5.2.6 - Added requirements for batteries for Brazil. Section 2.7 - New EU RoHS levels required for mercury content in CCFLs and other lamps. Section 2.9.1 - Clarification made that external power supplies and adapters require a WEEE label. Section 2.9.2 - The requirement for "EU Only" was clarified for IBM logo Deliverables. Information added for location of WEEE symbol when the product size or function does not allow the label to be placed on the product. Marking for WEEE has been updated for Croatia requirements. The black bar is no longer sufficient to meet "put on the market" requirements. A date of manufacture must be on the product with the WEEE label.
PN 46G3772 Page 168 of 197 EC J85151 13MAY05
EC 899569 04NOV93 EC G32590 08FEB06
EC 899773 07DEC94 EC L04925B 11JAN07
EC F15040 25AUG97 EC L04925M 01AUG07
EC F73298 02SEP99 EC L04925N 19FEB08
EC F74336 05SEP00 EC L05962X 08AUG08
EC F72950 23JAN02 EC L79598 25FEB09
EC H64064 13MAY03 EC N24534E 02OCT09
EC H17205 29JUL03 EC L79598A 22FEB10
EC L79598B 22SEPT10
EC L79598C 27APR2011
EC L79598D 6SEPT2011
EC N31517Y 26MAR2012
ECN31946T 19APR2013
ECN33076 5DEC2013
ECN33076A 16MAY2014
ECN46883 17OCT2014
ECP02692 26MAY2015
ECO P02838 15OCT2015
ECOP17505 21APR2016
ECO P17633 1OCT2016
ECOP17764 20MAR2017
ECOP17905 16OCT2017
ECOP17958 Jan 25, 2018
ECOP44540 June 11, 2018
ECOP44680 Mar 5, 2019
ECOP44794 Aug 9, 2019
ECO P44877 15Feb2020
ECO P45188 1Sept2020
ECO P45272 9Mar2021
ECO P45379 18Oct2021
ECO 45443 4April2022
ECO P45475 14Nov2022
This document is the property of IBM. Its use is authorized only for responding to a request for quotation or for the performance of work for IBM. All questions must be referred to the IBM Procurement Department requesting the quotation or performance of work.
Engineering Specification
Page 169 of 197
Date
2008-08-08 2008-02-19
2007-08-01
EC Level
L05962X L04925N
L04925M
Change Summary
Section 2.11 - Section modified to require IBM logo products to have the latest release of IBM's Environmental Notices and User Guide ship with all products, as well as parts which require it. Section 2.12 - Documentation from Suppliers must be updated if status changes 2.13.1 Monitors - Table added showing Energy Efficiency Grades. Monitors required to meet Grade 2 2.13.2. - Energy requirements and/ or labeling for monitors, adapters and chargers added for Korea. Registration required in Australia and New Zealand added. Energy label for the USA added for packaging. Annexed - Annex GG added and the list of chemicals and CAS numbers removed from Table 2. Additional CAS numbers added to Annex L. CAS numbers in Annex CC changed to match JIG 101 standard. Section 1.2 - Definitions for Article and Substance(s) of Very High Concern added. Table 1 - Additional formaldehyde requirements added for Deliverables with composite wood. For the Deca BDE entry, the definition of computer plastic housings was clarified to include attachments to the housings such as buttons (e.g. Power on and off), drive bezels (e.g. DVD and tape drive bezels) and snap in logos. PFOS prohibition clarifications added. Section 2.3.3 SVHC in Articles - Reporting Requirements - Added Table 12 - Requirement added for part/replacement part label for Mercury added products. Section 2.12 Requirements for Parts/Products Containing Composite Wood - Added. Section 2.13 Product Energy Requirements - Added. Annex K. CAS number changed for Dichlorofluoropropane (HCFC-261) from 7779-56-6 to 7799-56-6. CAS number 421-82-3 for Pentachlorodifluoropropane (HCFC-222) deleted and replaced with NA. CAS number 422-82-3 for 1,3-dichloro-1,1,2,2-tetrafluoropropane (HCFC-234cc) deleted and replaced with NA. Section 1.1 - Clarification for compliance to 46G3772 specification and all environmental regulations added. Section 2.1.1 Further clarification for PVC and TBBA restriction for system enclosures. Table 1 - Chemical substances added for Deliverables with wood parts - arsenic, benzo[a]pyrene, additional cadmium restrictions for wood, creosote and other compounds, additional lead restrictions for wood, pentachlorophenol and an additional restriction for formaldehyde in wood. Arsenic prohibited in paints added. Cadmium in plastics prohibition added for clarification. Deca BDE prohibited, reference to no intentional addition is removed and prohibitions added. Table 2 - The following substances were added: Dichloromethane, trichloroethylene and ethylene based glycol ethers for field use materials and chemical products. Section 2.3 - Clarification added that suppliers are required to complete a PCD for Deliverables. Table 4 - Beryllium Oxide now placed in its own row, separated from Beryllium and compounds Table 8 - Restrictions for content of batteries updated. Material restrictions for nonremovable batteries added. Table 9 - Added. This table summarizes some of the jurisdictions which require battery management plans. Section 2.5.2 - EU Labeling requirement for capacity added. Section 2.5.2.6 - Deleted. California requirement added to section 2.5.2.2 Annexes D, O, R, X, AA and EE were updated. Annex FF added. Section 1.2 Definitions for Battery or accumulator, Not detected, RoHS, REACH and WEEE were added. Definitions for Preparation and Substance were edited to match EU Regulation No 1907/2006 REACH. Section 1.3 Deviation process modified. Duplicate wording eliminated. Words itemizing compliance by supplier category deleted. Section 2 TBBA and PVC are now prohibited by IBM in product enclosures. This section was modified to put hardware prohibitions into Table 1 and additional prohibitions for Substances and Preparation into Table 2. Restrictions for cadmium, lead, mercury, hexavalent chromium and PBB and PBDEs were moved to Table 1. Full chemical disclosure is required for Substances and Preparations. Table 1 The following substances were added: formaldehyde, hexachlorobutadiene, toluene, tris (2,3 dibromopropyl) phosphate and tris-(aziridinyl)- phosphineoxide. The following substances have been brought forward from the Annex for Azo colorants to Table 1 or 2 because they are regulated irrespective if they are present in dyes - benzidine, 2-naphthylamine, and 4-aminobiphenyl. Mercury in fluorescent lamps must not exceed 10 milligrams per lamp. Restrictions (other than RoHS) for RoHS substances moved to this table from Table 2. Restrictions for lead changed to reflect new Danish decree for lead use in electronic equipment. Lead restriction in paints and varnishes added for restrictions in Switzerland. Decabromo diphenylether listed separately from the other restricted PBDEs. New legislation in the State of Washington prohibits any level of PBDEs (except Decabromo diphenylether). PBDEs and PBBs are now prohibited below the EU RoHS 1000ppm level. Restriction level for Shortchain Chlorinated Paraffins reduced to 0.1% by weight from 1.0 % by weight. The reference to the EU Directive on the approximation of the laws, regulations and the administrative provisions of the Member States relating to restrictions on the marketing and use of certain dangerous substances and preparations changed to the new EU Regulation concerning the Registration, Evaluation, Authorization and Restriction of Chemicals (REACH) was added. Table 2 Lists additional prohibitions for Substances, Preparations, field use materials and product chemicals. Newly added chemicals include - 4-nitrobiphenyl, trichlorobenzene, 4-aminobiphenyl, benzene, and 2naphthylamine. Table 4. The following substances were added: PFAS and PFOA. Table 7 Nickel cadmium batteries prohibited. Additional heavy metals restrictions added. Section 2.5.2.1 - Requirement added for battery removal instructions to be included in instruction manuals.
PN 46G3772 Page 169 of 197 EC J85151 13MAY05
EC 899569 04NOV93 EC G32590 08FEB06
EC 899773 07DEC94 EC L04925B 11JAN07
EC F15040 25AUG97 EC L04925M 01AUG07
EC F73298 02SEP99 EC L04925N 19FEB08
EC F74336 05SEP00 EC L05962X 08AUG08
EC F72950 23JAN02 EC L79598 25FEB09
EC H64064 13MAY03 EC N24534E 02OCT09
EC H17205 29JUL03 EC L79598A 22FEB10
EC L79598B 22SEPT10
EC L79598C 27APR2011
EC L79598D 6SEPT2011
EC N31517Y 26MAR2012
ECN31946T 19APR2013
ECN33076 5DEC2013
ECN33076A 16MAY2014
ECN46883 17OCT2014
ECP02692 26MAY2015
ECO P02838 15OCT2015
ECOP17505 21APR2016
ECO P17633 1OCT2016
ECOP17764 20MAR2017
ECOP17905 16OCT2017
ECOP17958 Jan 25, 2018
ECOP44540 June 11, 2018
ECOP44680 Mar 5, 2019
ECOP44794 Aug 9, 2019
ECO P44877 15Feb2020
ECO P45188 1Sept2020
ECO P45272 9Mar2021
ECO P45379 18Oct2021
ECO 45443 4April2022
ECO P45475 14Nov2022
This document is the property of IBM. Its use is authorized only for responding to a request for quotation or for the performance of work for IBM. All questions must be referred to the IBM Procurement Department requesting the quotation or performance of work.
Engineering Specification
Page 170 of 197
Date
2007-01-11
EC Level
L04925B
Change Summary
Section 2.5.2.3 - Battery clarification changed to Alkaline zinc-manganese and zinc-manganese for China Regulation on Mercury Content Limitation for Batteries. China labeling requirements for Mark logos was added here, note these requirements were already included in Section 2.10, but added in the battery section for clarity. Section 2.7 and Table 10 - Package labeling now required for mercury containing products. Section 2.10.3.1 Mark logo may be placed on the packaging only if the instructions and the packaging are integrated together. Section 2.10.3.3 - Date of Manufacture format requirements further clarified. Lead acid batteries do not require a Mark logo. Section 2.10.3.4 - HST table may be included in electronic versions of product instructions such as removable laser disks. Table 15 Added to provide example of HST table. Section 2.11. - Section is added to notify suppliers of hardware publications for IBM logo products that there are specific environmental notices which must be included in the publications. Title - IBM Logo Reference Removed Section 1.1 - Removed reference to IBM Logo product. Scope of specification is now any Deliverable where this specification is referenced in a Statement of Work, print, contract or other procurement document. Section 1.2 - New terms defined - Deliverable, preparations and substances. Section 1.3 - IBM Procurement can obtain consent for deviation from Vice President of relevant product division rather than solely development. Section 2.2 - Chlorinated Solvents, Hexachloroethane, and Perfluorooctane sulfonates added to substances prohibited from use. Cadmium use in plating or in a surface coating containing cadmium prohibited. Lead prohibition above 300ppm in frequently handled cables added. Table 1 - "Details of Restriction" column changed for Asbestos, Halogenated diphenyl methanes, PCBs, and PCTs. Table 2 - "Details of Restriction" changed for Cadmium, Lead, Mercury, PBBs and PBDEs. Section 2.3 - Threshold for cadmium reporting changed for cadmium use in plating and surface coating applications from 100ppm to any detected cadmium must be reported. Threshold for reporting for Mercury changed to "Any detectable level". Section 2.4.1 added requiring a logo mark and a label per California Safe Drinking Water and Toxic Enforcement Act. Section 2.4.1 clarification added exempting parts without adequate surface area from coding requirements. Section 2.5.2 - Requirement for battery manufacturers to have Battery Management Plans. Section 2.5.2.1 - EU battery labeling requirements clarified as applicable for all batteries. Section 2.5.2.6 added requiring a label or flyer for California Perchlorate Best Management Practices. Section 2.7 - Font size for labels for product containing mercury changed from 1.5mm to 3.53mm. Section 2.11 added for China EIP logo, DOM and HST table. 4.0 References added. 5.0 Revision History added.
ANNEXES: Chemical Lists with CAS Numbers
Unless specifically indicated as complete for the chemicals affected, these annex listings are examples only, except where noted.
Annex A. Asbestos
Asbestos
1332-21-4
Actinolite
77536-66-4; 77536-66-4
Amosite (Grunerite)
12172-73-5
Anthophyllite
77536-67-5
Chrysotile
12001-29-5; 132207-32-0
Crocidolite
12001-28-4
Cummingtonite
17499-08-0
Fibrous erionite
66733-21-9, 12510-42-8
Tremolite
77536-68-6, 14567-73-8
Annex B. Azo colorants -
Note: The EC azo dyes ban applies to 1.) Certain azo colorants that by reductive cleavage of azo groups may release one of the following 22
aromatic amines and 2.) The Azodye compound listed in the second table of this annex.
1. List of regulated aromatic amines
biphenyl-4-ylamine Benzidine (Note: benzidine is also listed as prohibited in Table 1, which is more restrictive than the requirements for azo colorants.) 4-chloro-o-toluidine 2-naphthylamine o-aminoazotoluene 5-nitro-o-toluidine 4-chloroaniline
92-67-1 92-87-5
95-69-2 91-59-8 97-56-3 99-55-8 106-47-8
PN 46G3772 Page 170 of 197 EC J85151 13MAY05
EC 899569 04NOV93 EC G32590 08FEB06
EC 899773 07DEC94 EC L04925B 11JAN07
EC F15040 25AUG97 EC L04925M 01AUG07
EC F73298 02SEP99 EC L04925N 19FEB08
EC F74336 05SEP00 EC L05962X 08AUG08
EC F72950 23JAN02 EC L79598 25FEB09
EC H64064 13MAY03 EC N24534E 02OCT09
EC H17205 29JUL03 EC L79598A 22FEB10
EC L79598B 22SEPT10
EC L79598C 27APR2011
EC L79598D 6SEPT2011
EC N31517Y 26MAR2012
ECN31946T 19APR2013
ECN33076 5DEC2013
ECN33076A 16MAY2014
ECN46883 17OCT2014
ECP02692 26MAY2015
ECO P02838 15OCT2015
ECOP17505 21APR2016
ECO P17633 1OCT2016
ECOP17764 20MAR2017
ECOP17905 16OCT2017
ECOP17958 Jan 25, 2018
ECOP44540 June 11, 2018
ECOP44680 Mar 5, 2019
ECOP44794 Aug 9, 2019
ECO P44877 15Feb2020
ECO P45188 1Sept2020
ECO P45272 9Mar2021
ECO P45379 18Oct2021
ECO 45443 4April2022
ECO P45475 14Nov2022
This document is the property of IBM. Its use is authorized only for responding to a request for quotation or for the performance of work for IBM. All questions must be referred to the IBM Procurement Department requesting the quotation or performance of work.
Engineering Specification
Page 171 of 197
4-methoxy-m-phenylenediamine
4,4'-methylenedianiline
3,3'-dichlorobenzidine
3,3'-dimethoxybenzidine
3,3'-dimethylbenzidine
4,4'-methylenedi-o-toluidine
6-methoxy-m-toluidine
4,4'-methylene-bis(2-chloroaniline)
4,4'-oxydianiline
4,4'-thiodianiline
o-toluidine
4-methyl-m-phenylenediamine
2,4,5-trimethylaniline
o-anisidine
4-amino azobenzene
2. List of regulated Azodyes
A mixture of
Disodium- (6- (4- anisidino) -3- sulfonato -2- ( 3,5- dinitro- 2-oxidophenylazo) -1-naphtholato) (1- (5-
chloro -2-oxidophenylazo) -2-naphtholato) chromate (1-); (molecular formula C39H23ClCrN7O12S.2Na); Trisodium bis (6- (4-anisidino) -3- sulfonato -2- (3,5- dinitro-2- oxidophenylazo) -1- naphtholato)
chromate(1-) (molecular formula C46H30CrN10O20S2.3Na)
Annex C. Cadmium/Cadmium Compounds
Cadmium
7440-43-9
Cadmium oxide
1306-19-0
Cadmium sulfide
1306-23-6
Cadmium chloride
10108-64-2
Cadmium sulfate
10124-36-4
Cadmium chromate
14312-00-6
Other cadmium compounds
-
Annex D. Halogenated aromatic substances
Polychlorinated biphenyls (PCB)(Note: PCBs are prohibited by other
See Annex O
regulations, see PCBs in Table 1 and Annex O)
Halogenated diarylalkanes -
Monomethyltetrachlorodiphenylmethane (Trade name: Ugilec 141)
76253-60-6
Monomethyldichlorodiphenylmethane (Trade name: Ugilec 121)
81161-70-8
Monomethyldibromodiphenylmethane (Trade name: DBBT)
99688-47-8
Halogenated benzenes -
Chlorobenzene (Monochlorobenzene, MCB)
108-90-7
Dichlorobenzene, 1,2- (ortho-DCB)
95-50-1
Dichlorobenzene, 1,4- (para-DCB)
106-46-7
Pentachlorobenzene
608-93-5
Tetrachlorobenzene, 1, 2, 4, 5-
95-94-3
Tetrachlorobenzene, 1, 2, 3, 5-
634-90-2
Tetrachlorobenzene, 1, 2, 3, 4-
634-66-2
Trichlorobenzene, 1, 2,4 -
120-82-1
Trichlorobenzene, 1, 2, 3-
87-61-6
Hexachlorobenzene
118-74-1
Annex E. Halogenated diphenyl methanes
Monomethyl tetrachloro diphenyl methane; Trade name: Ugilec 141
76253-60-6
Monomethyl dichloro diphenyl methane; Trade name: Ugilec 121, Ugilec 21 81161-70-8
Monomethyl dibromo dipenyl methane (DBBT)
99688-47-8
Annex F. Removed
Annex G. Hexavalent Chromium/Hexavalent Chromium Compounds
Ammonium dichromate
7789-09-5
Chromium (VI) oxide
1333-82-0
Barium chromate
10294-40-3
Calcium chromate
13765-19-0
Chromic acetate
1066-30-4
Chromium trioxide
1333-82-0
Lead (II) chromate
7758-97-6
Lead chromate molybdate sulphate red
12656-85-8
Lead sulfochromate yellow
1344-37-2
Potassium chlorochromate
16037-50-6
615-05-4 101-77-9 91-94-1 119-90-4 119-93-7 838-88-0 120-71-8 101-14-4 101-80-4 139-65-1 95-53-4 95-80-7 137-17-7 90-04-0 60-09-3
118685-33-9
Not available
PN 46G3772 Page 171 of 197 EC J85151 13MAY05
EC 899569 04NOV93 EC G32590 08FEB06
EC 899773 07DEC94 EC L04925B 11JAN07
EC F15040 25AUG97 EC L04925M 01AUG07
EC F73298 02SEP99 EC L04925N 19FEB08
EC F74336 05SEP00 EC L05962X 08AUG08
EC F72950 23JAN02 EC L79598 25FEB09
EC H64064 13MAY03 EC N24534E 02OCT09
EC H17205 29JUL03 EC L79598A 22FEB10
EC L79598B 22SEPT10
EC L79598C 27APR2011
EC L79598D 6SEPT2011
EC N31517Y 26MAR2012
ECN31946T 19APR2013
ECN33076 5DEC2013
ECN33076A 16MAY2014
ECN46883 17OCT2014
ECP02692 26MAY2015
ECO P02838 15OCT2015
ECOP17505 21APR2016
ECO P17633 1OCT2016
ECOP17764 20MAR2017
ECOP17905 16OCT2017
ECOP17958 Jan 25, 2018
ECOP44540 June 11, 2018
ECOP44680 Mar 5, 2019
ECOP44794 Aug 9, 2019
ECO P44877 15Feb2020
ECO P45188 1Sept2020
ECO P45272 9Mar2021
ECO P45379 18Oct2021
ECO 45443 4April2022
ECO P45475 14Nov2022
This document is the property of IBM. Its use is authorized only for responding to a request for quotation or for the performance of work for IBM. All questions must be referred to the IBM Procurement Department requesting the quotation or performance of work.
Engineering Specification
Page 172 of 197
Potassium chromate Potassium dichromate Silver chromate Sodium chromate Sodium chromate, dihydrate Sodium dichromate Strontium chromate Zinc chromate Chromic acid (H2CrO4), bis (triphenylsilyl) ester Bis(triphenylsilyl) chromate Hexanoic acid, 2-ethyl-, chromium salt Chromic acid Chromate (1-), hydroxyoctaoxodizincatedi-, potassium Chromic acid (H2CrO4), magnesium (1:1) Chromic acid (H2CrO4), cobalt (2++) salt (1:1) Chromic acid (H2Cr2O7), calcium salt (1:1) Chromic acid (H2Cr2O7), dilithium salt Lead chromate oxide Chromic acid (H2Cr2O7), compd. with pyridine (1:2) Octanoic acid, chromium salt Zinc chromate hydroxide (Zn5(CrO4)(OH)8) Phenazinium, 3-[[7-[(4-aminophenyl)amino]-5-phenylphenazinium-3yl]amino]-5-phenyl-7-[[5-phenyl-7 -(phenylamino) phenazinium-3-yl] amino]-, salt with chromic acid (H2Cr2O7) (2:3) Other hexavalent chromium compounds Annex H. Lead/Lead Compounds Lead Lead (II) sulfate Lead (II) carbonate Lead hydrocarbonate Lead acetate Lead (II) acetate, trihydrate Lead phosphate; Lead (II) phosphate Lead selenide Lead (IV) oxide Lead (II,IV) oxide Lead (II) sulfide Lead (II) oxide Lead (II) carbonate basic Lead hydroxidcarbonate Lead (II) chromate Lead (II) titanate Lead sulfate, sulphuric acid, lead salt Lead sulphate, tribasic Lead stearate Lead arsenite Lead azide Lead hexafluorosilicate Lead (II) methanesulphonate Lead naphthenate Lead dinitrate Lead chromate molybdate sulphate red Lead sulfochromate yellow Tetraethyl lead Tetramethyl lead Other lead compounds
7789-00-6 7778-50-9 7784-01-2 7775-11-3 7789-12-0 10588-01-9 7789-06-2 13530-65-9 1624-02-8
7329-33-1 7738-94-5, 13530-68-2 11103-86-9 13423-61-5 13455-25-9 14307-33-6 14307-35-8 18454-12-1 20039-37-6 20195-23-7 49663-84-5 75578-75-5
-
7439-92-1 7446-14-2 598-63-0 1319-46-6 301-04-2 6080-56-4 7446-27-7 7446-27-7 12069-00-0 1309-60-0 1314-41-6 1314-87-0 1317-36-8 1319-46-6 1344-36-1 7758-97-6 12060-00-3 15739-80-7 12202-17-4 1072-35-1 10031-13-7 13424-46-9 25808-74-6 17570-76-2 61790-14-5 10099-74-8 12656-85-8 1344-37-2 78-00-2 75-74-1 -
Annex I. Mercury /Mercury Compounds
An extensive list of mercury compounds can be found at
http://www.pic.int/en/CasNumbers/mercury%20compounds%20CAS%20numbers.pdf
Mercury
7439-97-6
PN 46G3772 Page 172 of 197 EC J85151 13MAY05
EC 899569 04NOV93 EC G32590 08FEB06
EC 899773 07DEC94 EC L04925B 11JAN07
EC F15040 25AUG97 EC L04925M 01AUG07
EC F73298 02SEP99 EC L04925N 19FEB08
EC F74336 05SEP00 EC L05962X 08AUG08
EC F72950 23JAN02 EC L79598 25FEB09
EC H64064 13MAY03 EC N24534E 02OCT09
EC H17205 29JUL03 EC L79598A 22FEB10
EC L79598B 22SEPT10
EC L79598C 27APR2011
EC L79598D 6SEPT2011
EC N31517Y 26MAR2012
ECN31946T 19APR2013
ECN33076 5DEC2013
ECN33076A 16MAY2014
ECN46883 17OCT2014
ECP02692 26MAY2015
ECO P02838 15OCT2015
ECOP17505 21APR2016
ECO P17633 1OCT2016
ECOP17764 20MAR2017
ECOP17905 16OCT2017
ECOP17958 Jan 25, 2018
ECOP44540 June 11, 2018
ECOP44680 Mar 5, 2019
ECOP44794 Aug 9, 2019
ECO P44877 15Feb2020
ECO P45188 1Sept2020
ECO P45272 9Mar2021
ECO P45379 18Oct2021
ECO 45443 4April2022
ECO P45475 14Nov2022
This document is the property of IBM. Its use is authorized only for responding to a request for quotation or for the performance of work for IBM. All questions must be referred to the IBM Procurement Department requesting the quotation or performance of work.
Engineering Specification
Page 173 of 197
Phenylmercury acetate Phenylmercury propionate Phenylmercury 2-ethylhexanoate Phenylmercuric octanoate Phenylmercury neodecanoate Mercuric chloride Mercury (II) chloride Mercuric sulfate Mercuric nitrate Mercuric (II) oxide Mercuric sulfide Other mercury compounds Annex J. Nickel Nickel Nickelacetate Nickelcarbonate Nickelcarbonyl Nickelhydroxide Nickelocene Nickeloxide Nickel sulfide (Ni3S2) Nickel chloride Nickel sulfate Nickel sulfate hexahydrate Nickel sulfide (NiS) Nickel nitrate hexahydrate Nickel carbonate hydroxide Other nickel compounds Annex K. Ozone Depleting Substances Chlorofluorocarbons (CFCs): Trichlorofluoromethane (CFC-11) and its isomers
Dichlorodifluoromethane (CFC-12) and its isomers
Trichlorotrifluoroethane (CFC-113) and its isomers
Dichlorotetrafluoroethane (CFC-114) and its isomers Monochloropentafluoroethane (CFC-115) and its isomers Chlorotrifluoromethane (CFC-13) and its isomers Pentachlorofluoroethane (CFC-111) and its isomers Tetrachlorodifluoroethane (CFC-112) and its isomers Heptachlorofluoropropane (CFC-211) and its isomers Hexachlorodifluoropropane (CFC-212) and its isomers Pentachlorotrifluoropropane (CFC-213) and its isomers
Tetrachlorotetrafluoropropane (CFC-214) and its isomers Trichloropentafluoropropane (CFC-215) and its isomers
Dichlorohexafluoropropane (CFC-216) and its isomers Chloroheptafluoropropane (CFC-217) and its isomers Halons: Dibromodifluoromethane (Halon-1202) Bromochlorodifluoromethane (Halon-1211) and its isomers Bromotrifluoromethane (Halon-1301) and its isomers Dibromotetrafluoroethane (Halon-2402) and its isomers
62-38-4 103-27-5 13302-00-6 13864-38-5 26545-49-3 33631-63-9 7487-94-7 7783-35-9 10045-94-0 21908-53-2 1344-48-5 -
7440-02-0 373-02-4 3333-67-3 13463-39-3 12054-48-7, 11113-74-9 1271-28-9 1313-99-1 12035-72-2 7718-54-9 7786-81-4 10101-97-0 11113-75-0 13478-00-7 12607-70-4 -
75-69-4 DR 2 62185-70-0 DR 2 79620-41-0 DR 2 83589-40-6 DR 2 91315-61-6 75-71-8 DR 2 185009-39-6 DR 2 62185-71-1 76-13-1 DR 2 39349-94-5 DR 2 56996-61-3 DR 2 57762-34-2 76-14-2 76-15-3, DR 2 12770-91-1 75-72-9, 185009-43-2 354-56-3, 29756-45-4 76-12-0, 76-11-9 422-78-6, 135401-87-5 3182-26-1 2354-06-5 134237-31-3 29255-31-0, 2268-46-4 1599-41-3 4259-43-2 76-17-5 661-97-2 422-86-6, 76-18-6
75-61-6 353-59-3, 11104-73-7 75-63-8, 62395-25-9 124-73-2, DR 2 76199-55-8
PN 46G3772 Page 173 of 197 EC J85151 13MAY05
EC 899569 04NOV93 EC G32590 08FEB06
EC 899773 07DEC94 EC L04925B 11JAN07
EC F15040 25AUG97 EC L04925M 01AUG07
EC F73298 02SEP99 EC L04925N 19FEB08
EC F74336 05SEP00 EC L05962X 08AUG08
EC F72950 23JAN02 EC L79598 25FEB09
EC H64064 13MAY03 EC N24534E 02OCT09
EC H17205 29JUL03 EC L79598A 22FEB10
EC L79598B 22SEPT10
EC L79598C 27APR2011
EC L79598D 6SEPT2011
EC N31517Y 26MAR2012
ECN31946T 19APR2013
ECN33076 5DEC2013
ECN33076A 16MAY2014
ECN46883 17OCT2014
ECP02692 26MAY2015
ECO P02838 15OCT2015
ECOP17505 21APR2016
ECO P17633 1OCT2016
ECOP17764 20MAR2017
ECOP17905 16OCT2017
ECOP17958 Jan 25, 2018
ECOP44540 June 11, 2018
ECOP44680 Mar 5, 2019
ECOP44794 Aug 9, 2019
ECO P44877 15Feb2020
ECO P45188 1Sept2020
ECO P45272 9Mar2021
ECO P45379 18Oct2021
ECO 45443 4April2022
ECO P45475 14Nov2022
This document is the property of IBM. Its use is authorized only for responding to a request for quotation or for the performance of work for IBM. All questions must be referred to the IBM Procurement Department requesting the quotation or performance of work.
Engineering Specification
Page 174 of 197
Tribromofluoromethane (Halon 1103) Dibromochlorofluoromethane (Halon 1112) Tetrabromodifluoroethane (Halon 2204) Bromodichlorofluoromethane (Halon 1121) Pentabromofluoroethane (Halon 2105) Tribromotrifluoroethane (Halon 2303) Bromopentafluoroethane (Halon 2501) Tribromopentafluoropropane (Halon 3503) Dibromohexafluoropropane (Halon 3602) Bromoheptafluoropropane (Halon 3701) Other: Carbon tetrachloride 1,1,1-trichloroethane (methyl chloroform) and its isomers except 1,1,2trichloroethane Bromomethane (methyl bromide) 1-Bromopropane (n-propyl bromide) Bromoethane (ethyl bromide) Chlorobromomethane Trifluoroiodomethane (trifluoromethyl iodide) Chloromethane (methyl chloride) Hydrobromofluorocarbons (HBFCs) and their isomers: Bromodifluoromethane and its isomers HBFC-22B1 (FM-100) CHFBr2 CH2FBr C2HFBr4 C2HF2Br3 C2HF3Br2 C2HF4Br C2H2FBr3 C2H2F2Br2 C2H2F3Br C2H3FBr2 C2H3F2Br C2H4FBr C3HFBr6 C3HF2Br5 C3HF3Br4 C3HF4Br3 C3HF5Br2 C3HF6Br C3H2FBr5 C3H2F2Br4 C3H2F3Br3 C3H2F4Br2 C3H2F5Br C3H3FBr4 C3H3F2Br3 C3H3F3Br2 C3H3F4Br C3H4FBr3 C3H4F2Br2 C3H4F3Br C3H5FBr2 C3H5F2Br C3H6FBr Hydrochlorofluorocarbons (HCFCs) and their isomers: Dichlorofluoromethane (HCFC-21) Chlorodifluoromethane (HCFC-22)
353-54-8 353-55-9 Not available Not available Not available Not available Not available Not available Not available Not available
56-23-5 71-55-6 DR 2 74552-83-3 74-83-9 106-94-5 74-96-4 74-97-5 2314-97-8 74-87-3
1511-62-2 1511-62-2 1868-53-7 373-52-4 Not available Not available 354-04-1, DR 2 66542-88-9 Not available Not available 75-82-1 421-06-7 358-97-4 Not available 762-49-2 Not available Not available Not available Not available Not available Not available Not available Not available Not available Not available Not available Not available Not available Not available Not available Not available Not available Not available Not available Not available Not available
75-43-4, DR2 39289-28-6 75-45-6 DR2 73666-77-0 DR 2 134191-96-1
PN 46G3772 Page 174 of 197 EC J85151 13MAY05
EC 899569 04NOV93 EC G32590 08FEB06
EC 899773 07DEC94 EC L04925B 11JAN07
EC F15040 25AUG97 EC L04925M 01AUG07
EC F73298 02SEP99 EC L04925N 19FEB08
EC F74336 05SEP00 EC L05962X 08AUG08
EC F72950 23JAN02 EC L79598 25FEB09
EC H64064 13MAY03 EC N24534E 02OCT09
EC H17205 29JUL03 EC L79598A 22FEB10
EC L79598B 22SEPT10
EC L79598C 27APR2011
EC L79598D 6SEPT2011
EC N31517Y 26MAR2012
ECN31946T 19APR2013
ECN33076 5DEC2013
ECN33076A 16MAY2014
ECN46883 17OCT2014
ECP02692 26MAY2015
ECO P02838 15OCT2015
ECOP17505 21APR2016
ECO P17633 1OCT2016
ECOP17764 20MAR2017
ECOP17905 16OCT2017
ECOP17958 Jan 25, 2018
ECOP44540 June 11, 2018
ECOP44680 Mar 5, 2019
ECOP44794 Aug 9, 2019
ECO P44877 15Feb2020
ECO P45188 1Sept2020
ECO P45272 9Mar2021
ECO P45379 18Oct2021
ECO 45443 4April2022
ECO P45475 14Nov2022
This document is the property of IBM. Its use is authorized only for responding to a request for quotation or for the performance of work for IBM. All questions must be referred to the IBM Procurement Department requesting the quotation or performance of work.
Engineering Specification
Page 175 of 197
Chlorofluoromethane (HCFC-31) Tetrachlorofluoroethane (HCFC-121)
1,1,1,2-tetrachloro-2-fluoroethane 1,1,2,2-tetrachloro-1-fluoroethane Trichlorodifluoroethane (HCFC-122) Trichloro-1,1-difluoroethane 1,2,2-trichloro-1,1-difluoroethane
1,2,2-trichloro-1,2-difluoroethane 1,1,1-trichloro-2,2-difluoroethane 1,1,2-trichloro-2,2-difluoroethane Dichlorotrifluoroethane (HCFC-123) Dichloro-1,1,2-trifluoroethane 2,2-dichloro-1,1,1-trifluoroethane 1,2-dichloro-1,1,2-trifluoroethane (HCFC-123a) 1,1-dichloro-1,2,2-trifluoroethane 2,2-dichloro-1,1,2-trifluoroethane Chlorotetrafluoroethane (HCFC-124) 2-chloro-1,1,1,2-tetrafluoroethane 1-chloro-1,1,2,2-tetrafluoroethane (HCFC-124a) Trichlorofluoroethane (HCFC-131)
1,1,2-trichloro-2-fluoroethane 1,1,2-trichloro-1 (or 2)-fluoroethane 1,1,2-trichloro-1-fluoroethane (HCFC-131a) 1,1,1-trichloro-2-fluoroethane (HCFC-131b) Dichlorodifluoroethane (HCFC-132) Dichloro-1,1-difluoroethane 1,1-dichlorodifluoroethane (meso) 1,2-dichloro-1,2-difluoroethane (R,R)-(+-).1,2-dichloro-1,2-difluoroethane 1,2-dichloro-1,1-difluoroethane (HCFC-132b) 1,1-dichloro-1,2-difluoroethane 1,1-dichloro-2,2-difluoroethane 1,2-dichloro-1,2-difluoroethane Chlorotrifluoroethane (HCFC-133)
1-chloro-1,2,2-trifluoroethane 1-chloro-1,1,2-trifluoroethane 2chloro-1,1,1-trifluoroethane (HCFC-133a) Dichlorofluoroethane (HCFC-141) 1,1-dichloro-1-fluoroethane (HCFC-141b) 1,2-dichloro-1-fluoroethane 1,1-dichloro-2-fluoroethane Chlorodifluoroethane (HCFC-142)
Chloro-1,1-difluoroethane 2-chloro-1,1-difluoroethane 1-chloro-1,1-difluoroethane (HCFC-142b)
1-chloro-1,2-difluoroethane (HCFC-142a) Hexachlorofluoropropane (HCFC-221)
1,1,1,2,3,3-hexachloro-3-fluoropropane 1,1,1,2,3,3-hexachloro-2-fluoropropane 1,1,1,2,2,3-hexachloro-1-fluoropropane 1,1,2,2,3,3-hexachloro-1-fluoropropane 1,1,1,3,3,3-hexachloro-2-fluoropropane Pentachlorodifluoropropane (HCFC-222)
1,1,2,3,3-pentachloro-1,3-difluoropropane
593-70-4
134237-32-4 130879-71-9 DR 2 134237-32-43 354-11-0 354-14-3
41834-16-6 55949-46-7 354-21-2 DR 2 134237-33-53 DR2 62549-18-2 354-15-4 354-12-1 Not available
34077-87-7 90454-18-5 306-83-2 354-23-4 812-04-4 Not available
63938-10-3 2837-89-0 354-25-6
27154-33-2 134237-34-63 359-28-4 90134-98-8 811-95-0 2366-36-1
25915-78-0 55494-45-6 31153-51-2 33579-37-2 33489-30-4 1649-08-7 1842-05-3 471-43-2 431-06-1
1330-45-6 DR2 38097-47-1 431-07-2 421-04-5 75-88-7
25167-88-8 1717-00-6 430-57-9 430-53-5
25497-29-4 DR2 58561-84-5 DR2 27175-71-9 55949-44-5 338-65-8 75-68-3 DR2 65762-25-6 338-64-7
29470-94-8 134237-35-73 431-79-8 422-40-2 422-26-4 422-28-6 Not available
116867-32-4 134237-36-83 431-82-3
PN 46G3772 Page 175 of 197 EC J85151 13MAY05
EC 899569 04NOV93 EC G32590 08FEB06
EC 899773 07DEC94 EC L04925B 11JAN07
EC F15040 25AUG97 EC L04925M 01AUG07
EC F73298 02SEP99 EC L04925N 19FEB08
EC F74336 05SEP00 EC L05962X 08AUG08
EC F72950 23JAN02 EC L79598 25FEB09
EC H64064 13MAY03 EC N24534E 02OCT09
EC H17205 29JUL03 EC L79598A 22FEB10
EC L79598B 22SEPT10
EC L79598C 27APR2011
EC L79598D 6SEPT2011
EC N31517Y 26MAR2012
ECN31946T 19APR2013
ECN33076 5DEC2013
ECN33076A 16MAY2014
ECN46883 17OCT2014
ECP02692 26MAY2015
ECO P02838 15OCT2015
ECOP17505 21APR2016
ECO P17633 1OCT2016
ECOP17764 20MAR2017
ECOP17905 16OCT2017
ECOP17958 Jan 25, 2018
ECOP44540 June 11, 2018
ECOP44680 Mar 5, 2019
ECOP44794 Aug 9, 2019
ECO P44877 15Feb2020
ECO P45188 1Sept2020
ECO P45272 9Mar2021
ECO P45379 18Oct2021
ECO 45443 4April2022
ECO P45475 14Nov2022
This document is the property of IBM. Its use is authorized only for responding to a request for quotation or for the performance of work for IBM. All questions must be referred to the IBM Procurement Department requesting the quotation or performance of work.
Engineering Specification
Page 176 of 197
1,1,1,2,3-pentachloro-3,3-difluoropropane 1,1,1,3,3-pentachloro-2,2-difluoropropane 1,2,2,3,3-pentachloro-1,1-difluoropropane 1,1,1,2,2-pentachloro-3,3-difluoropropane 1,1,1,2,3-pentachloro-2,3-difluoropropane 1,1,1,3,3-pentachloro-2,3-difluoropropane (1,1,3,3,3-pentachloro-1,2-difluoropropane) 1,1,2,2,3-pentachloro-1,3-difluoropropane 1,1,2,3,3-pentachloro-1,2-difluoropropane Tetrachlorotrifluoropropane (HCFC-223)
1,1,1,3-tetrachloro-2,3,3-trifluoropropane 1,1,2,3-tetrachloro-1,3,3-trifluoropropane 1,1,1,2-tetrachloro-3,3,3-trifluoropropane 1,1,3,3-tetrachloro-1,2,2-trifluoropropane 1,1,1,3-tetrachloro-2,2,3-trifluoropropane 1,2,3,3-tetrachloro-1,1,2-trifluoropropane 2,2,3,3-tetrachloro-1,1,1-trifluoropropane 1,1,2,2-tetrachloro-1,3,3-trifluoropropane 1,1,1,2-tetrachloro-2,3,3-trifluoropropane 1,1,3,3-tetrachloro-1,2,3-trifluoropropane 1,2,2,3-tetrachloro-1,1,3-trifluoropropane 1,1,2,3-tetrachloro-1,2,3-trifluoropropane Trichlorotetrafluoropropane (HCFC-224)
1,1,3-trichloro-1,2,3,3-tetrafluoropropane 1,1,1-trichloro-2,3,3,3-tetrafluoropropane 1,1,2-trichloro-1,3,3,3-tetrafluoropropane 1,3,3-trichloro-1,1,2,2-tetrafluoropropane 1,1,3-trichloro-1,2,2,3-tetrafluoropropane 1,1,1-trichloro-2,2,3,3-tetrafluoropropane 2,3,3-trichloro-1,1,1,2-tetrafluoropropane 1,2,3-trichloro-1,1,2,3-tetrafluoropropane 1,2,2-trichloro-1,1,3,3-tetrafluoropropane 2,2,3-trichloro-1,1,1,3-tetrafluoropropane 1,1,2-trichloro-1,2,3,3-tetrafluoropropane Dichloropentafluoropropane (HCFC-225) 1,3-dichloro-1,1,2,3,3-pentafluoropropane 3,3-dichloro-1,1,1,2,2-pentafluoropropane (HCFC-225ca) 1,3-dichloro-1,1,2,2,3-pentafluoropropane (HCFC-225cb) 2,2-dichloro-1,1,1,3,3-pentafluoropropane (HCFC-225aa) 1,1-dichloro-1,2,3,3,3-pentafluoropropane (R,S)2,3-dichloro-1,1,1,2,3-pentafluoropropane (R,R)2,3-dichloro-1,1,1,2,3-pentafluoropropane 1,1-dichloro-1,2,2,3,3-pentafluoropropane 1,2-dichloro-1,1,3,3,3-pentafluoropropane (HCFC-225da) 2,3-dichloro-1,1,1,2,3-pentafluoropropane (HCFC-225ba) 1,2-dichloro-1,1,2,3,3-pentafluoropropane Chlorohexafluoropropane (HCFC-226)
2-chloro-1,1,1,2,3,3-hexafluoropropane (HCFC-226ba) 2-chloro-1,1,1,3,3,3-hexafluoropropane (HCFC-226da) 3-chloro-1,1,1,2,2,3-hexafluoropropane (HCFC-226ca) 1-chloro-1,1,2,2,3,3-hexafluoropropane (HCFC-226cb) 1-chloro-1,1,2,3,3,3-hexafluoropropane (HCFC-226ea) Pentachlorofluoropropane (HCFC-231) 1,1,1,2,3-pentachloro-2-fluoropropane 1,1,2,3,3-pentachloro-2-fluoropropane 1,1,1,3,3-pentachloro-3-fluoropropane 1,1,2,2,3-pentachloro-1-fluoropropane 1,1,1,2,2-pentachloro-3-fluoropropane 1,1,1,2,3-pentachloro-3-fluoropropane 1,1,1,3,3-pentachloro-2-fluoropropane 1,1,2,2,3-pentachloro-3-fluoropropane 1,1,2,3,3-pentachloro-1-fluoropropane
431-80-1 422-49-1 422-30-0 422-27-5 Not available Not available
Not available Not available
29470-95-9 134237-37-93 54002-59-4 431-83-4 431-81-2 422-52-6 422-50-4 422-41-3 422-35-5 422-29-7 Not available Not available Not available Not available
127564-91-4 134237-38-03 53063-53-9 53063-52-8 431-84-5 422-54-8 422-53-7 422-51-5 422-47-9 422-42-4 422-32-2 Not available Not available 127564-92-5 136013-79-1 422-56-0 507-55-1 128903-21-9 111512-56-2 111512-55-1 111512-51-7 13474-88-9 431-86-7 422-48-0 422-44-6
28987-04-4 134308-72-83 51346-64-6 431-87-8 422-57-1 422-55-9 359-58-0 134190-48-03 421-94-3 Not available Not available Not available Not available Not available Not available Not available Not available
PN 46G3772 Page 176 of 197 EC J85151 13MAY05
EC 899569 04NOV93 EC G32590 08FEB06
EC 899773 07DEC94 EC L04925B 11JAN07
EC F15040 25AUG97 EC L04925M 01AUG07
EC F73298 02SEP99 EC L04925N 19FEB08
EC F74336 05SEP00 EC L05962X 08AUG08
EC F72950 23JAN02 EC L79598 25FEB09
EC H64064 13MAY03 EC N24534E 02OCT09
EC H17205 29JUL03 EC L79598A 22FEB10
EC L79598B 22SEPT10
EC L79598C 27APR2011
EC L79598D 6SEPT2011
EC N31517Y 26MAR2012
ECN31946T 19APR2013
ECN33076 5DEC2013
ECN33076A 16MAY2014
ECN46883 17OCT2014
ECP02692 26MAY2015
ECO P02838 15OCT2015
ECOP17505 21APR2016
ECO P17633 1OCT2016
ECOP17764 20MAR2017
ECOP17905 16OCT2017
ECOP17958 Jan 25, 2018
ECOP44540 June 11, 2018
ECOP44680 Mar 5, 2019
ECOP44794 Aug 9, 2019
ECO P44877 15Feb2020
ECO P45188 1Sept2020
ECO P45272 9Mar2021
ECO P45379 18Oct2021
ECO 45443 4April2022
ECO P45475 14Nov2022
This document is the property of IBM. Its use is authorized only for responding to a request for quotation or for the performance of work for IBM. All questions must be referred to the IBM Procurement Department requesting the quotation or performance of work.
Engineering Specification
Page 177 of 197
Tetrachlorodifluoropropane (HCFC-232) 1,2,3,3,-tetrachloro-1,1-difluoropropane 1,1,3,3,-tetrachloro-2,2-difluoropropane 1,1,1,3,-tetrachloro-2,2-difluoropropane 1,1,1,3,-tetrachloro-3,3-difluoropropane 1,1,1,3,-tetrachloro-2,3-difluoropropane 1,1,1,2,-tetrachloro-2,3-difluoropropane 1,1,1,2,-tetrachloro-3,3-difluoropropane 1,1,2,3,-tetrachloro-1,2-difluoropropane 1,1,2,3,-tetrachloro-1,3-difluoropropane 1,2,3,3,-tetrachloro-1,2-difluoropropane (1,1,2,3,-tetrachloro-2,3-difluoropropane) 1,2,2,3,-tetrachloro-1,1-difluoropropane 1,2,2,3,-tetrachloro-1,3-difluoropropane 1,1,3,3,-tetrachloro-1,3-difluoropropane 1,1,2,2,-tetrachloro-3,3-difluoropropane (2,2,3,3,-tetrachloro-1,1-difluoropropane) 1,1,2,2,-tetrachloro-1,3-difluoropropane
127564-82-3 67879-59-8 1112-14-7 677-54-3 460-89-9 Not available Not available Not available Not available Not available Not available
Not available Not available Not available Not available
Not available
Trichlorotrifluoropropane (HCFC-233)
1,1,3-trichloro-2,2,3-trifluoropropane 1,1,1-trichloro-2,2,3-trifluoropropane 1,1,3-trichloro-1,2,3-trifluoropropane 1,1,1-trichloro-2,3,3-trifluoropropane 1,1,2-trichloro-2,3,3-trifluoropropane 1,1,1-trichloro-3,3,3-trifluoropropane 2,2,3-trichloro-1,1,1-trifluoropropane 2,3,3-trichloro-1,1,1-trifluoropropane 1,1,3-trichloro-1,2,2-trifluoropropane 1,2,3-trichloro-1,1,2-trifluoropropane 1,1,3-trichloro-1,3,3-trifluoropropane 1,1,2-trichloro-1,2,3-trifluoropropane 1,2,3-trichloro-1,2,3-trifluoropropane 1,1,2-trichloro-1,3,3-trifluoropropane 1,3,3-trichloro-1,1,2-trifluoropropane 2,2,3-trichloro-1,1,3-trifluoropropane 1,2,3-trichloro-1,1,3-trifluoropropane 1,2,2-trichloro-1,1,3-trifluoropropane Dichlorotetrafluoropropane (HCFC-234) 1,3-dichloro-1,1,3,3-tetrafluoropropane (HCFC-234fa) 1,3-dichloro-1,2,2,3-tetrafluoropropane 1,1-dichloro-1,2,2,3-tetrafluoropropane 1,1-dichloro-1,3,3,3-tetrafluoropropane (R,R) 1,3-dichloro-1,1,2,3-tetrafluoropropane 3,3-dichloro-1,1,1,2-tetrafluoropropane 2,2-dichloro-1,1,3,3-tetrafluoropropane 1,1-dichloro-2,2,3,3-tetrafluoropropane 1,2-dichloro-1,2,3,3-tetrafluoropropane 1,3-dichloro-1,1,2,2-tetrafluoropropane (HCFC-234cc) 2,3-dichloro-1,1,1,3-tetrafluoropropane (HCFC-234da) 1,1-dichloro-1,2,3,3-tetrafluoropropane 1,2-dichloro-1,1,3,3-tetrafluoropropane 2,3-dichloro-1,1,1,2-tetrafluoropropane 2,2-dichloro-1,1,1,3-tetrafluoropropane 1,2-dichloro-1,1,2,3-tetrafluoropropane 1,3-dichloro-1,1,2,3-tetrafluoropropane
61623-04-9 134237-40-43 131221-36-8 131211-71-7 54377-32-1 54306-56-8 13058-99-6 7125-84-0 7125-83-9 431-51-6 421-99-8 421-95-4 333-26-6 Not available Not available Not available Not available Not available Not available Not available
127564-83-4 76140-39-1 70341-81-0 70192-63-1 64712-27-2 53149-65-8 53063-54-0 17705-30-5 4071-01-6 425-94-5 422-00-4 Not available Not available Not available Not available Not available Not available Not available
Chloropentafluoropropane (HCFC-235)
3-chloro-1,1,1,2,3-pentafluoropropane 2-chloro-1,1,1,3,3-pentafluoropropane (HCFC-235da) 1-chloro-1,2,2,3,3-pentafluoropropane (HCFC-235ca) 1-chloro-1,1,2,2,3-pentafluoropropane (HCFC-235cc) 1-chloro-1,1,3,3,3-pentafluoropropane (HCFC-235fa) 3-chloro-1,1,1,2,2-pentafluoropropane (HCFC-235cb) 2-chloro-1,1,1,2,3-pentafluoropropane 1-chloro-1,1,2,3,3-pentafluoropropane
108662-83-5 134237-83-53 134237-41-5 134251-06-2 28103-66-4 679-99-2 677-55-4 460-92-4 422-02-6 Not available
PN 46G3772 Page 177 of 197 EC J85151 13MAY05
EC 899569 04NOV93 EC G32590 08FEB06
EC 899773 07DEC94 EC L04925B 11JAN07
EC F15040 25AUG97 EC L04925M 01AUG07
EC F73298 02SEP99 EC L04925N 19FEB08
EC F74336 05SEP00 EC L05962X 08AUG08
EC F72950 23JAN02 EC L79598 25FEB09
EC H64064 13MAY03 EC N24534E 02OCT09
EC H17205 29JUL03 EC L79598A 22FEB10
EC L79598B 22SEPT10
EC L79598C 27APR2011
EC L79598D 6SEPT2011
EC N31517Y 26MAR2012
ECN31946T 19APR2013
ECN33076 5DEC2013
ECN33076A 16MAY2014
ECN46883 17OCT2014
ECP02692 26MAY2015
ECO P02838 15OCT2015
ECOP17505 21APR2016
ECO P17633 1OCT2016
ECOP17764 20MAR2017
ECOP17905 16OCT2017
ECOP17958 Jan 25, 2018
ECOP44540 June 11, 2018
ECOP44680 Mar 5, 2019
ECOP44794 Aug 9, 2019
ECO P44877 15Feb2020
ECO P45188 1Sept2020
ECO P45272 9Mar2021
ECO P45379 18Oct2021
ECO 45443 4April2022
ECO P45475 14Nov2022
This document is the property of IBM. Its use is authorized only for responding to a request for quotation or for the performance of work for IBM. All questions must be referred to the IBM Procurement Department requesting the quotation or performance of work.
Engineering Specification
Page 178 of 197
2-chloro-1,1,2,3,3-pentafluoropropane
Not available
Tetrachlorofluoropropane (HCFC-241) 1,1,1,2-tetrachloro-3-fluoropropane 1,1,1,3-tetrachloro-3-fluoropropane 1,1,2,3-tetrachloro-3-fluoropropane 1,1,2,2-tetrachloro-1-fluoropropane 1,1,2,3-tetrachloro-2-fluoropropane 1,1,1,2-tetrachloro-2-fluoropropane 1,1,2,3-tetrachloro-1-fluoropropane 1,1,1,3-tetrachloro-2-fluoropropane 1,1,2,2-tetrachloro-3-fluoropropane 1,2,2,3-tetrachloro-1-fluoropropane 1,1,3,3-tetrachloro-1-fluoropropane 1,1,3,3-tetrachloro-2-fluoropropane Trichlorodifluoropropane (HCFC-242)
1,3,3-trichloro-1,1-difluoropropane 1,2,3-trichloro-1,2-difluoropropane 1,1,3-trichloro-2,2-difluoropropane 1,2,3-trichloro-1,1-difluoropropane 1,1,1-trichloro-2,2-difluoropropane 1,2,2-trichloro-1,1-difluoropropane 1,1,2-trichloro-1,2-difluoropropane 1,1,1-trichloro-2,3-difluoropropane 1,1,2-trichloro-1,3-difluoropropane 1,1,3-trichloro-1,2-difluoropropane 1,1,2-trichloro-2,3-difluoropropane 1,2,2-trichloro-1,3-difluoropropane 2,2,3-trichloro-1,1-difluoropropane 1,1,1-trichloro-3,3-difluoropropane 1,1,3-trichloro-1,3-difluoropropane 1,1,2-trichloro-3,3-difluoropropane 1,1,3-trichloro-2,3-difluoropropane 1,2,3-trichloro-1,3-difluoropropane Dichlorotrifluoropropane (HCFC-243)
2,2-dichloro-1,1,1-trifluoropropane 1,1-dichloro-1,2,2-trifluoropropane 1,2-dichloro-1,1,2-trifluoropropane 2,3-dichloro-1,1,1-trifluoropropane (HCFC-243da) 1,3-dichloro-1,2,2-trifluoropropane 1,1-dichloro-2,2,3-trifluoropropane 3,3-dichloro-1,1,1-trifluoropropane 1,3-dichloro-1,1,2-trifluoropropane 1,2-dichloro-1,1,3-trifluoropropane 1,1-dichloro-1,2,3-trifluoropropane 2,3-dichloro-1,1,2-trifluoropropane 2,2-dichloro-1,1,3-trifluoropropane 1,2-dichloro-1,2,3-trifluoropropane 1,3-dichloro-1,1,3-trifluoropropane 1,1-dichloro-1,3,3-trifluoropropane 3,3-dichloro-1,1,2-trifluoropropane 2,3-dichloro-1,1,3-trifluoropropane 1,3-dichloro-1,2,3-trifluoropropane Chlorotetrafluoropropane (HCFC-244) 2-chloro-1,1,1,3-tetrafluoropropane (HCFC-244db) 3-chloro-1,1,2,2-tetrafluoropropane 1-chloro-1,2,2,3-tetrafluoropropane 1-chloro-1,1,3,3-tetrafluoropropane (HCFC-244fb) 2-chloro-1,1,3,3-tetrafluoropropane (HCFC-244da) 2-chloro-1,1,1,2-tetrafluoropropane (HCFC-244ba) 1-chloro-1,1,2,2-tetrafluoropropane 1-chloro-1,1,2,3-tetrafluoropropane 3-chloro-1,1,1,2-tetrafluoropropane 2-chloro-1,1,2,3-tetrafluoropropane
134190-49-13 84816-05-7 23153-22-2 21981-25-9 7126-06-9 3175-26-6 3175-25-5 666-27-3 Not available Not available Not available Not available Not available
127564-90-3 134237-42-63 460-63-9 7164-14-9 1112-13-6 431-24-3 1112-05-6 7126-05-8 7126-04-7 Not available Not available Not available Not available Not available Not available Not available Not available Not available Not available Not available
116890-51-8 134237-43-73 7126-01-4 7125-99-7 7126-00-3 338-75-0 67406-68-2 70192-70-0 460-69-5 Not available Not available Not available Not available Not available Not available Not available Not available Not available Not available Not available 134190-50-43 117970-90-8 679-85-6 67406-66-0 2730-64-5 19041-02-2 421-73-8 421-75-0 Not available Not available Not available
PN 46G3772 Page 178 of 197 EC J85151 13MAY05
EC 899569 04NOV93 EC G32590 08FEB06
EC 899773 07DEC94 EC L04925B 11JAN07
EC F15040 25AUG97 EC L04925M 01AUG07
EC F73298 02SEP99 EC L04925N 19FEB08
EC F74336 05SEP00 EC L05962X 08AUG08
EC F72950 23JAN02 EC L79598 25FEB09
EC H64064 13MAY03 EC N24534E 02OCT09
EC H17205 29JUL03 EC L79598A 22FEB10
EC L79598B 22SEPT10
EC L79598C 27APR2011
EC L79598D 6SEPT2011
EC N31517Y 26MAR2012
ECN31946T 19APR2013
ECN33076 5DEC2013
ECN33076A 16MAY2014
ECN46883 17OCT2014
ECP02692 26MAY2015
ECO P02838 15OCT2015
ECOP17505 21APR2016
ECO P17633 1OCT2016
ECOP17764 20MAR2017
ECOP17905 16OCT2017
ECOP17958 Jan 25, 2018
ECOP44540 June 11, 2018
ECOP44680 Mar 5, 2019
ECOP44794 Aug 9, 2019
ECO P44877 15Feb2020
ECO P45188 1Sept2020
ECO P45272 9Mar2021
ECO P45379 18Oct2021
ECO 45443 4April2022
ECO P45475 14Nov2022
This document is the property of IBM. Its use is authorized only for responding to a request for quotation or for the performance of work for IBM. All questions must be referred to the IBM Procurement Department requesting the quotation or performance of work.
Engineering Specification
Page 179 of 197
3-chloro-1,1,1,3-tetrafluoropropane
Not available
3-chloro-1,1,2,3-tetrafluoropropane
Not available
Trichlorofluoropropane (HCFC-251)
134190-51-53
(R,S)-(.+-.) 1,2,3-trichloro-1-fluoropropane
84847-80-3
(R,R)-(.+-.)
84847-79-0
[R(R,S)]
76985-34-7
[R(R,R)]
76985-33-6
(R,S)
67832-50-2
(R,R)
67832-44-4
1,2,3-trichloro-2-fluoropropane
7126-16-1
1,2,2-trichloro-3-fluoropropane
70192-89-1
1,1,3-trichloro-1-fluoropropane
818-99-5
1,1,3-trichloro-2-fluoropropane
76937-36-5
1,1,2-trichloro-1-fluoropropane
421-41-0
1,1,2-trichloro-2-fluoropropane
3175-24-4
1,1,1-trichloro-2-fluoropropane
Not available
1,1,1-trichloro-3-fluoropropane
Not available
1,1,2-trichloro-3-fluoropropane
Not available
1,1,3-trichloro-3-fluoropropane
Not available
1,2,2-trichloro-1-fluoropropane
Not available
1,2,3-trichloro-1-fluoropropane
Not available
Dichlorodifluoropropane (HCFC-252)
134190-52-63
1,1-dichloro-2,2-difluoropropane
1112-01-2
1,1-dichloro-3,3-difluoropropane
131404-17-6
1,1-dichloro-1,3-difluoropropane
121612-64-4
1,2-dichloro-1,1-difluoropropane
7126-15-0
1,2-dichloro-2,3-difluoropropane
70192-74-4
2,3-dichloro-1,1-difluoropropane
82578-00-5
1,3-dichloro-1,1-difluoropropane
819-00-1
1,3-dichloro-1,2-difluoropropane
111483-26-2
1,3-dichloro-2,2-difluoropropane
1112-36-3
1,1-dichloro-1,2-difluoropropane
Not available
1,1-dichloro-2,3-difluoropropane
Not available
1,2-dichloro-1,2-difluoropropane
Not available
1,2-dichloro-1,3-difluoropropane
Not available
1,3-dichloro-1,3-difluoropropane
Not available
2,2-dichloro-1,1-difluoropropane
Not available
2,2-dichloro-1,3-difluoropropane
Not available
Chlorotrifluoropropane (HCFC-253)
26588-23-8 134237-44-83
2-chloro-1,1,1-trifluoropropane
421-47-6
3-chloro-1,1,1-trifluoropropane
460-35-5
1-chloro-1,1,2-trifluoropropane
134251-05-1
2-chloro-1,1,2-trifluoropropane
69202-10-4
3-chloro-1,1,2-trifluoropropane
121612-65-5
1-chloro-1,1,3-trifluoropropane
83124-56-5
1-chloro-1,2,2-trifluoropropane
70192-76-6
1-chloro-2,2,3-trifluoropropane
56758-54-4
2-chloro-1,1,3-trifluoropropane
Not available
3-chloro-1,1,3-trifluoropropane
Not available
(1-chloro-1,3,3-trifluoropropane)
1-chloro-1,2,3-trifluoropropane
Not available
2-chloro-1,2,3-trifluoropropane
Not available
Dichlorofluoropropane (HCFC-261)
127404-11-9 134237-45-93
1,1-dichloro-1-fluoropropane
7799-56-6
1,1-dichloro-2-fluoropropane
53074-31-0
1,1-dichloro-3-fluoropropane
53074-30-9
1,2-dichloro-1-fluoropropane
7799-56-5
1,2-dichloro-2-fluoropropane
420-97-3
1,2-dichloro-3-fluoropropane
453-01-0
1,3-dichloro-1-fluoropropane
83124-60-1
1,3-dichloro-2-fluoropropane
816-38-6
2,2-dichloro-1-fluoropropane
Not available
Chlorodifluoropropane (HCFC-262)
134190-53-73
1-chloro-1,1-difluoropropane
421-02-3
PN 46G3772 Page 179 of 197 EC J85151 13MAY05
EC 899569 04NOV93 EC G32590 08FEB06
EC 899773 07DEC94 EC L04925B 11JAN07
EC F15040 25AUG97 EC L04925M 01AUG07
EC F73298 02SEP99 EC L04925N 19FEB08
EC F74336 05SEP00 EC L05962X 08AUG08
EC F72950 23JAN02 EC L79598 25FEB09
EC H64064 13MAY03 EC N24534E 02OCT09
EC H17205 29JUL03 EC L79598A 22FEB10
EC L79598B 22SEPT10
EC L79598C 27APR2011
EC L79598D 6SEPT2011
EC N31517Y 26MAR2012
ECN31946T 19APR2013
ECN33076 5DEC2013
ECN33076A 16MAY2014
ECN46883 17OCT2014
ECP02692 26MAY2015
ECO P02838 15OCT2015
ECOP17505 21APR2016
ECO P17633 1OCT2016
ECOP17764 20MAR2017
ECOP17905 16OCT2017
ECOP17958 Jan 25, 2018
ECOP44540 June 11, 2018
ECOP44680 Mar 5, 2019
ECOP44794 Aug 9, 2019
ECO P44877 15Feb2020
ECO P45188 1Sept2020
ECO P45272 9Mar2021
ECO P45379 18Oct2021
ECO 45443 4April2022
ECO P45475 14Nov2022
This document is the property of IBM. Its use is authorized only for responding to a request for quotation or for the performance of work for IBM. All questions must be referred to the IBM Procurement Department requesting the quotation or performance of work.
Engineering Specification
Page 180 of 197
2-chloro-1,1-difluoropropane 3-chloro-1,1-difluoropropane 1-chloro-1,2-difluoropropane 1-chloro-2,3-difluoropropane 2-chloro-1,3-difluoropropane 1-chloro-2,2-difluoropropane 2-chloro-1,2-difluoropropane 1-chloro-1,3-difluoropropane Chlorofluoropropane (HCFC-271) 1-chloro-1-fluoropropane 1-chloro-2-fluoropropane 1-chloro-3-fluoropropane 2-chloro-1-fluoropropane 2-chloro-2-fluoropropane
Chlorofluoroethane (HCFC-151)
430-93-3 83124-57-6 430-96-6 37161-81-2 102738-79-4 420-99-5 Not available Not available 134190-54-83 430-55-7 430-46-6 462-38-4 20372-78-5 420-44-0
762-50-5
Notes: 1 Manufacturing processes do not include facilities equipment or systems such as chillers and fire suppression systems. 2 DR denotes a deleted registry number that was replaced with another registry number. 3 Chemical to which Chemical Abstract Service (CAS) assigned registry number based on premise that it was a trade name, although chemical
may be the same as another one already listed.
Annex L. Perfluorocarbons (PFC)
Carbon tetrafluoride (Perfluoromethane, tetrafluoromethane) (PFC-14) Perfluoroethane (Hexafluoroethane) (PFC-116) Perfluoropropane (Octafluoropropane) (PFC-218) Perfluorobutane (Decafluorobutane) (PFC-3-1-10; R-31-10) Perfluoropentane (Dodecafluoropentane) (PFC-4-1-12; R-41-12) Perfluorohexane (Tetradecafluorohexane) (PFC-5-1-14; R-51-14) Perfluorocyclobutane (Octafluorocyclobutane) (PFC-c-318) Perfluoroheptane Perfluorooctane
75-73-0 76-16-4 76-19-7 355-25-9 678-26-2 355-42-0 115-25-3 335-57-9 307-34-6
Annex M. Polybrominated biphenyls (PBBs) including all congeners and isomers
2-Bromobiphenyl
2052-07-5
3-Bromobiphenyl
2113-57-7
4-Bromobiphenyl
92-66-0
Decabromobiphenyl Dibromobiphenyl
13654-09-6 92-86-4
Heptabromobiphenyl Hexabromobiphenyl
35194-78-6 59080-40-9
Hexabromo-1,1-biphenyl Nonabromobiphenyl Octabromobiphenyl Pentabromobiphenyl
36355-01-8 27753-52-2 61288-13-9, 27858-07-7 56307-79-0
Polybrominated Biphenyl Tetrabromobiphenyl
59536-65-1 40088-45-7
Tribromobiphenyl Firemaster FF-1
59080-34-1 67774-32-7
Annex N. Polybrominated diphenyl ethers (PBDEs) including all congeners and isomers
Bromobiphenyl Ether
101-55-3
Decabromobiphenyl Ether
1163-19-5
Dibromobiphenyl Ether Heptabromobiphenyl Ether Hexabromobiphenyl Ether Nonabromobiphenyl Ether Octabromobiphenyl Ether
2050-47-7 68928-80-3 36483-60-0 63936-56-1 32536-52-0
Pentabromobiphenyl Ether Tetrabromobiphenyl Ether Tribromobiphenyl Ether
32534-81-9 40088-47-9 49690-94-0
Annex O. Polychlorinated biphenyls (PCBs)
Polychlorinated Biphenyls Aroclor Chlorodiphenyl (Aroclor 1260) Kanechlor 500
1336-36-3 12767-79-2 11096-82-5 27323-18-8
PN 46G3772 Page 180 of 197 EC J85151 13MAY05
EC 899569 04NOV93 EC G32590 08FEB06
EC 899773 07DEC94 EC L04925B 11JAN07
EC F15040 25AUG97 EC L04925M 01AUG07
EC F73298 02SEP99 EC L04925N 19FEB08
EC F74336 05SEP00 EC L05962X 08AUG08
EC F72950 23JAN02 EC L79598 25FEB09
EC H64064 13MAY03 EC N24534E 02OCT09
EC H17205 29JUL03 EC L79598A 22FEB10
EC L79598B 22SEPT10
EC L79598C 27APR2011
EC L79598D 6SEPT2011
EC N31517Y 26MAR2012
ECN31946T 19APR2013
ECN33076 5DEC2013
ECN33076A 16MAY2014
ECN46883 17OCT2014
ECP02692 26MAY2015
ECO P02838 15OCT2015
ECOP17505 21APR2016
ECO P17633 1OCT2016
ECOP17764 20MAR2017
ECOP17905 16OCT2017
ECOP17958 Jan 25, 2018
ECOP44540 June 11, 2018
ECOP44680 Mar 5, 2019
ECOP44794 Aug 9, 2019
ECO P44877 15Feb2020
ECO P45188 1Sept2020
ECO P45272 9Mar2021
ECO P45379 18Oct2021
ECO 45443 4April2022
ECO P45475 14Nov2022
This document is the property of IBM. Its use is authorized only for responding to a request for quotation or for the performance of work for IBM. All questions must be referred to the IBM Procurement Department requesting the quotation or performance of work.
Engineering Specification
Page 181 of 197
Aroclor 1254
11097-69-1
Terphenyls
26140-60-3
Annex P. Shortchain Chlorinated Paraffins (also known as Shortchain chlorinated alkanes)
Only short-chain chlorinated paraffins with carbon length of 10-13 atoms are covered.
Chlorinated paraffins (C10-13) (also known as Alkanes, C10-13, chloro) Alkanes, C 10-12, chloro
85535-84-8 108171-26-2
Alkanes, C 12-13, chloro
71011-12-6
Alkanes, C 10-14, chloro
85681-73-8
Alkanes, C 6-18, chloro
68920-70-7
Alkanes, C 12-14, chloro
85536-22-7
Other Short Chain Chlorinated Paraffins (SCCPs)
-
Alkanes, chlorinated; alkanes (C10-C13), chloro (60%); alkanes
(C10-C13), chloro (50-70%); chlorinated alkanes; chlorinated
Synonyms for SCCPs
alkanes, chlorinated paraffins; chloroalkanes; chlorocarbons;
paraffin, chlorinated; paraffins, chloro; paroils, chlorinated;
polychlorinated alkanes; polychloroalkanes
Annex Q. Chlorinated Solvents (complete list)
Chloroform
67-66-3
1,1,2-trichloroethane
79-00-5
1,1,2,2-tetrachloroethane
79-34-5
1,1,1,2-tetrachloroethane
630-20-6
Pentachloroethane
76-01-7
1,1-dichloroethylene
75-35-4
1,1,1 Trichloroethane (note - this substance is also included in the Annex for ozone depleting substances)
71-55-6
Carbon tetrachloride (note - this substance is also included in the Annex for ozone depleting substances) 56-23-5
Annex R. Polychlorinated naphthalenes
Polychlorinated Naphthalenes
70776-03-3
Dichloronaphthalene
28699-88-9
Trichloronaphthalene
1321-65-9
Tetrachloronaphthalene
1335-88-2
Pentachloronaphthalene
1321-64-8
Hexachloronaphthalene
1335-87-1
Heptachloronaphthalene
32241-08-0
Octachloronaphthalene
2234-13-1
Other polychlorinated naphthalenes
-
Annex S. Tributyl tin oxide (TBTO)
Bis(tri-n-butyltin) oxide
56-35-9
Annex T. Antimony/Antimony Compounds
Antimony (metallic)
7440-36-0
Antimony pentoxide
1314-60-9
Antimony trichloride
10025-91-9
Sodium antimonate
15432-85-6
Other antimony compounds
-
Annex U. Arsenic/Arsenic Compounds
Arsenic
7440-38-2
Gallium arsenide
1303-00-0
Calcium arsenate
7778-44-1
Calcium arsenite
27152-57-4
Potassium arsenite
10124-50-2
Potassium arsenate
7784-41-0
Lead arsenate
3687-31-8
Sodium arsenate
10048-95-0
Copper arsenate
10103-61-4
Ammonium arsenate
7784-44-3
Lead arsenate
7784-40-9
Arsenic acid, magnesium salt
10103-50-1
Arsenic trichloride
7784-34-1
Arsine
7784-42-1
Copper arsenite
10290-12-7
Arsenic acid
7778-39-4
Other arsenic compounds, not including arsenic pentoxide and arsenic
-
PN 46G3772 Page 181 of 197 EC J85151 13MAY05
EC 899569 04NOV93 EC G32590 08FEB06
EC 899773 07DEC94 EC L04925B 11JAN07
EC F15040 25AUG97 EC L04925M 01AUG07
EC F73298 02SEP99 EC L04925N 19FEB08
EC F74336 05SEP00 EC L05962X 08AUG08
EC F72950 23JAN02 EC L79598 25FEB09
EC H64064 13MAY03 EC N24534E 02OCT09
EC H17205 29JUL03 EC L79598A 22FEB10
EC L79598B 22SEPT10
EC L79598C 27APR2011
EC L79598D 6SEPT2011
EC N31517Y 26MAR2012
ECN31946T 19APR2013
ECN33076 5DEC2013
ECN33076A 16MAY2014
ECN46883 17OCT2014
ECP02692 26MAY2015
ECO P02838 15OCT2015
ECOP17505 21APR2016
ECO P17633 1OCT2016
ECOP17764 20MAR2017
ECOP17905 16OCT2017
ECOP17958 Jan 25, 2018
ECOP44540 June 11, 2018
ECOP44680 Mar 5, 2019
ECOP44794 Aug 9, 2019
ECO P44877 15Feb2020
ECO P45188 1Sept2020
ECO P45272 9Mar2021
ECO P45379 18Oct2021
ECO 45443 4April2022
ECO P45475 14Nov2022
This document is the property of IBM. Its use is authorized only for responding to a request for quotation or for the performance of work for IBM. All questions must be referred to the IBM Procurement Department requesting the quotation or performance of work.
Engineering Specification
Page 182 of 197
trioxide, as these substances have a separate entry on the reportable table) Annex V. Beryllium/Beryllium Compounds
Beryllium-aluminum alloy Beryllium chloride Beryllium fluoride Beryllium hydroxide Beryllium phosphate Beryllium sulfate Beryllium sulfate tetrahydrate Beryl ore Beryllium carbonate Beryllium nitrate Other beryllium compounds (This does not include beryllium, beryllium oxide and beryllium copper alloys. These substances have a separate entry on the reportable table.) Annex W. Bismuth/Bismuth Compounds and Alloys Bismuth Bismuth trioxide Bismuth nitrate Other bismuth compounds Annex X. Brominated Flame Retardants (other than PBB or PBDE) Poly(2,6-dibromo-phenylene oxide) Tetra-decabromo-diphenoxy-benzene 1,2-Bis(2,4,6-tribromo-phenoxy) ethane TBBA, unspecified TBBA-epichlorhydrin oligomer TBBA-TBBA-diglycidyl-ether oligomer TBBA carbonate oligomer TBBA carbonate oligomer, phenoxy end capped TBBA carbonate oligomer, 2,4,6-tribromo-phenol terminated Brominated epoxy resin end-capped with tribromophenol Brominated epoxy resin end-capped with tribromophenol TBBA-(2,3-dibromo-propyl-ether) TBBA bis-(2-hydroxy-ethyl-ether) TBBA-bis-(allyl-ether) TBBA-dimethyl-ether Tetrabromo-bisphenol S TBBS-bis-(2,3-dibromo-propyl-ether) 2,4-Dibromo-phenol 2,4,6-tribromo-phenol Pentabromo-phenol 2,4,6-Tribromo-phenyl-alltl-ether Tribromo-phenyl-allyl-ether, unspecified Bis(methyl)tetrabromo-phthalate Bis(2-ethlhexyl)tetrabromo-phtalate 2-Hydroxy-propyl-2-(2-hydroxy-ethoxy)-ethyl-TBP TBPA, glycol-and propylene-oxide esters N,N'-Ethylene bis-(tetrabromo-phthalimide) Ethylene-bis(5,6-dibromo-norbornane-2,3-dicarboximide) 2,3-Dibromo-2-butene-1,4-diol Dibromo-neopentyl-glycol Dibromo-propanol Tribromo-neopentyl-alcohol Poly tribromo-styrene Tribromo-styrene Dibromo-styrene grafted PP Poly-dibromo-styrene Bromo-/Chloro-paraffins Bromo-/Chloro-alpha-olefin Vinylbromide Tris-(2,3-dibromo-propyl)-isocyanurate Tris(2,4-Dibromo-phenyl) phosphate
12770-50-2 7787-47-5 7787-49-7 13327-32-7 13598-15-7 13510-49-1 7787-56-6 1302-52-9 66104-24-3, 13106-47-3 13597-99-4 -
7440-69-9 1304-76-3 10361-44-1 -
69882-11-7 58965-66-5 37853-59-1 30496-13-0 40039-93-8 70682-74-5 28906-13-0 94334-64-2 71342-77-3 139638-58-7 135229-48-0 21850-44-2 4162-45-2 25327-89-3 37853-61-5 39635-79-5 42757-55-1 615-58-7 118-79-6 608-71-9 3278-89-5 26762-91-4 55481-60-2 26040-51-7 20566-35-2 75790-69-1 32588-76-4 52907-07-0 3234-02-4 3296-90-0 96-13-9 36483-57-5 57137-10-7 61368-34-1 171091-06-8 31780-26-4 68955-41-9 82600-56-4 593-60-2 52434-90-9 49690-63-3
PN 46G3772 Page 182 of 197 EC J85151 13MAY05
EC 899569 04NOV93 EC G32590 08FEB06
EC 899773 07DEC94 EC L04925B 11JAN07
EC F15040 25AUG97 EC L04925M 01AUG07
EC F73298 02SEP99 EC L04925N 19FEB08
EC F74336 05SEP00 EC L05962X 08AUG08
EC F72950 23JAN02 EC L79598 25FEB09
EC H64064 13MAY03 EC N24534E 02OCT09
EC H17205 29JUL03 EC L79598A 22FEB10
EC L79598B 22SEPT10
EC L79598C 27APR2011
EC L79598D 6SEPT2011
EC N31517Y 26MAR2012
ECN31946T 19APR2013
ECN33076 5DEC2013
ECN33076A 16MAY2014
ECN46883 17OCT2014
ECP02692 26MAY2015
ECO P02838 15OCT2015
ECOP17505 21APR2016
ECO P17633 1OCT2016
ECOP17764 20MAR2017
ECOP17905 16OCT2017
ECOP17958 Jan 25, 2018
ECOP44540 June 11, 2018
ECOP44680 Mar 5, 2019
ECOP44794 Aug 9, 2019
ECO P44877 15Feb2020
ECO P45188 1Sept2020
ECO P45272 9Mar2021
ECO P45379 18Oct2021
ECO 45443 4April2022
ECO P45475 14Nov2022
This document is the property of IBM. Its use is authorized only for responding to a request for quotation or for the performance of work for IBM. All questions must be referred to the IBM Procurement Department requesting the quotation or performance of work.
Engineering Specification
Page 183 of 197
Tris(tribromo-neopentyl) phosphate
19186-97-1
Chlorinated and brominated phosphate esther
125997-20-8
Pentabromo-toluene
87-83-2
Pentabromo-benzyl bromide
38521-51-6
1,3-Butadiene homopolymer,brominated
68441-46-3
Pentabromo-benzyl-acrylate, monomer
59447-55-1
Pentabromo-benzyl-acrylate, polymer
59447-57-3
Decabromo-diphenyl-ethane
84852-53-9
Tribromo-bisphenyl-maleinimide
59789-51-4
Brominated trimethylphenyl-lindane
Hexabromo-cyclo-dodecane (HBCD), unspecified
3194-55-6, 25637-99-4
Tetrabromo-chyclo-octane
31454-48-5
1,2-Dibromo-4-(1,2 dibromo-methyl)-cyclo-hexane
3322-93-8
TBPA Na salt
25357-79-3
Tetrabromo phthalic anhydride
632-79-1
TBBA-bisphenol A-phosgene polymer
32844-27-2
Bis(methyl)tetrabromo-phthalate
55481-60-2
Formaldehyde, polymer with bromophenol and 2-(chloromethyl)oxirane 68541-56-0
Brominated flame retardant which comes under notation of ISO 1043-4 code number FR (14) [Aliphatic/alicyclic brominated compounds]
-
Brominated flame retardant which comes under notation of ISO 1043-4
code number FR (15) [Aliphatic/alicyclic brominated compounds in
-
combination with antimony compounds]
Brominated flame retardant which comes under notation of ISO 1043-4
code number FR (16) [Aromatic brominated compounds excluding
-
brominated diphenyl ether and biphenyls]
Brominated flame retardant which comes under notation of ISO 1043-4
code number FR (17) [Aromatic brominated compounds excluding brominated diphenyl ether and biphenyls) in combination with antimony
-
compounds]
Brominated flame retardant which comes under notation of ISO 1043-4
code number FR (22) [Aliphatic/alicyclic chlorinated and brominated
-
compounds]
Brominated flame retardant which comes under notation of ISO 1043-4 code number FR (42) [Brominated organic phosphorus compounds]
-
Annex Y. Magnesium/Magnesium Alloys and Magnesium compounds
Magnesium
7439-95-4
Magnesium hydroxide
1309-42-8
Magnesium oxide
1309-48-4
Magnesium carbonate
546-93-0
Magnesium sulfate
7487-88-9
Magnesium chloride
7786-30-3
Other magnesium alloys
-
Annex Z. Perfluorooctyl acid (PFOA) and salts (for a more comprehensive list of PFOA CAS numbers see OECD
http://search.oecd.org/officialdocuments/displaydocumentpdf/?cote=env/jm/mono%282006%2915&doclanguage=en or
www.oecd.org/officialdocuments/publicdisplaydocumentpdf/?doclanguage=en&cote=env/jm/mono(2006)15
Pentadecafluorooctanoic acid
335-67-1
2,2,3,3,4,4,5,5,6,6,7,7,8,8,8-penta¬deca¬fluoro-octanoic acid, sodium salt
335-95-5
2,2,3,3,4,4,5,5,6,6,7,7,8,8,8-penta¬deca¬fluoro-octanoic acid, potassium salt 2395-00-8
2,2,3,3,4,4,5,5,6,6,7,7,8,8,8-penta¬deca¬fluoro-octanoic acid, silver salt
335-93-3
Acid Fluoride of PFOA
335-66-0
Methyl ester of PFOA
376-27-2
Ethyl ester of PFOA
3108-24-5
2,2,3,3,4,4,5,5,6,6,7,7,8,8,8-penta¬deca¬fluoro-octanoic acid, ammonium salt 3825-26-1
Octanoic acid, 2,2,3,3,4,4,5,5,6,6,7,7,8,8,8-pentadecafluoro-, chromium(3+)
68141-02-6
Ethanaminium, N,N,N-triethyl-, salt with pentadecafluorooctanoic acid (1:1) 98241-25-9
Annex AA. Phthalates
Benzyl 3-isobutyryloxy-1-isopropyl-2,2-dimethylpropyl phthalate
16883-83-3
Benzyl octyl phthalate
68515-40-2
Di (2-methoxyethyl) phthalate
117-82-8
Dimethyl phthalate (DMP)
131-11-3
Diethyl phthalate (DEP)
84-66-2
Diallyl phthalate (DAP)
131-17-9
PN 46G3772 Page 183 of 197 EC J85151 13MAY05
EC 899569 04NOV93 EC G32590 08FEB06
EC 899773 07DEC94 EC L04925B 11JAN07
EC F15040 25AUG97 EC L04925M 01AUG07
EC F73298 02SEP99 EC L04925N 19FEB08
EC F74336 05SEP00 EC L05962X 08AUG08
EC F72950 23JAN02 EC L79598 25FEB09
EC H64064 13MAY03 EC N24534E 02OCT09
EC H17205 29JUL03 EC L79598A 22FEB10
EC L79598B 22SEPT10
EC L79598C 27APR2011
EC L79598D 6SEPT2011
EC N31517Y 26MAR2012
ECN31946T 19APR2013
ECN33076 5DEC2013
ECN33076A 16MAY2014
ECN46883 17OCT2014
ECP02692 26MAY2015
ECO P02838 15OCT2015
ECOP17505 21APR2016
ECO P17633 1OCT2016
ECOP17764 20MAR2017
ECOP17905 16OCT2017
ECOP17958 Jan 25, 2018
ECOP44540 June 11, 2018
ECOP44680 Mar 5, 2019
ECOP44794 Aug 9, 2019
ECO P44877 15Feb2020
ECO P45188 1Sept2020
ECO P45272 9Mar2021
ECO P45379 18Oct2021
ECO 45443 4April2022
ECO P45475 14Nov2022
This document is the property of IBM. Its use is authorized only for responding to a request for quotation or for the performance of work for IBM. All questions must be referred to the IBM Procurement Department requesting the quotation or performance of work.
Engineering Specification
Page 184 of 197
Di-n-propyl phthalate (DPP) Butyl cyclohexyl phthalate (BCP) Dicyclohexyl phthalate Diisohexyl phthalate (DiHxP) Diisoheptyl phthalate (DiHpP) Butyl decyl phthalate (BDP) Diisooctyl phthalate (DIOP) N-Octyl n-decyl phthalate (ODP) Diundecyl phthalate (DUP) Diisoundecyl phthalate (DIUP) Ditridecyl phthalate (DTDP) Diisotridecyl phthalate (DIUP) Annex BB. Polyvinyl Chloride Polyvinyl chloride (PVC) Annex CC. Radioactive Substances Uranium 238 Plutonium Radon Americium 241 Thorium 232 Cesium Cesium 137 Strontium Strontium-90 Other radioactive substances Annex DD. Selenium/Selenium Compounds Selenium Hydrogen selenide Sodium selenide Selenium dioxide Sodium selenate Dimethyl selenide Selenium oxide Other selenium compounds Annex EE. Tributyl Tin, Triphenyl Tin Tributyltin Tributyltin oxide Tributyltin benzoate Tributyl tin bromide Tributyltin linoleate Tributyltin methacrylate Triphenyl tin Triphenyltin N,N'-dimethyldithiocarbamate Triphenyltin fluoride Triphenyltin acetate Triphenyltin chloride Triphenyltin hydroxide Triphenyltin fatty acid salts (C=9-11) Triphenyltin chloroacetate Tributyltin methacrylate Bis(tributyltin) fumarate Tributyltin fluoride Bis(tributyltin) 2,3-dibromosuccinate Tributyltin acetate Tributyltin laurate Bis(tributyltin) phthalate Copolymer of alkyl acrylate, methyl methacrylate and tributyltin methacrylate(alkyl; C=8) Tributyltin sulfamate Bis(tributyltin) maleate Tributyltin chloride Mixture of tributyltin cyclopentanecarboxylate and its analogs (Tributyltin
131-16-8 84-64-0 84-61-7 146-50-9 41451-28-9 89-19-0 27554-26-3 119-07-3 3648-20-2 85507-79-5 119-06-2 68515-47-9
9002-86-2
7440-61-1 7440-07-5 10043-92-2 14596-10-2; 7440-35-9 7440-29-1 7440-46-2 10045-97-3 7440-24-6 10098-97-2 -
7782-49-2 7783-07-5 1313-85-5 7446-08-4 13410-01-0 593-79-3 12640-89-0 -
688-73-3 56-35-9 4342-36-3 1461-23-0 24124-25-2 2155-70-6 668-34-8 1803-12-9 379-52-2 900-95-8 639-58-7 76-87-9 47672-31-1 7094-94-2 2155-70-6 6454-35-9 1983-10-4 31732-71-5 56-36-0 3090-36-6 4782-29-0
67772-01-4
6517-25-5 14275-57-1 1461-22-9, 7342-38-3 -
PN 46G3772 Page 184 of 197 EC J85151 13MAY05
EC 899569 04NOV93 EC G32590 08FEB06
EC 899773 07DEC94 EC L04925B 11JAN07
EC F15040 25AUG97 EC L04925M 01AUG07
EC F73298 02SEP99 EC L04925N 19FEB08
EC F74336 05SEP00 EC L05962X 08AUG08
EC F72950 23JAN02 EC L79598 25FEB09
EC H64064 13MAY03 EC N24534E 02OCT09
EC H17205 29JUL03 EC L79598A 22FEB10
EC L79598B 22SEPT10
EC L79598C 27APR2011
EC L79598D 6SEPT2011
EC N31517Y 26MAR2012
ECN31946T 19APR2013
ECN33076 5DEC2013
ECN33076A 16MAY2014
ECN46883 17OCT2014
ECP02692 26MAY2015
ECO P02838 15OCT2015
ECOP17505 21APR2016
ECO P17633 1OCT2016
ECOP17764 20MAR2017
ECOP17905 16OCT2017
ECOP17958 Jan 25, 2018
ECOP44540 June 11, 2018
ECOP44680 Mar 5, 2019
ECOP44794 Aug 9, 2019
ECO P44877 15Feb2020
ECO P45188 1Sept2020
ECO P45272 9Mar2021
ECO P45379 18Oct2021
ECO 45443 4April2022
ECO P45475 14Nov2022
This document is the property of IBM. Its use is authorized only for responding to a request for quotation or for the performance of work for IBM. All questions must be referred to the IBM Procurement Department requesting the quotation or performance of work.
Engineering Specification
naphthenate) Tributyltin cyclopentane carbonate=mixture Triphenyltin fatty acid ((9-11) salt) Mixture of tributyltin 1,2,3,4,4a,4b,5,6,10,10a-decahydro -7-isopropyl- 1,4a- dimethyl-1phenanthlenecarboxylate and its analogs (Tributyltin rosin salt) Tributyltin naphthenate Other Tributyl Tins & Triphenyl Tins
Page 185 of 197
5409-17-2 18380-71-7, 18380-72-8, 47672-31-1, 94850-90-5 26239-64-5 85409-17-2 -
Annex FF. Creosote, Coal Tar, Anthracene Etc. (This list of substances is complete)
Cresote; wash oil
8001-58-9
Creosote Oil; wash oil
61789-28-4
Distillates (coal tar), naphthalene oils; naphthalene oil
84650-04-4
Creosote oil, acenaphthene fraction; wash oil
90640-84-9
Distillates (coal tar), upper; heavy anthracene oil
65996-91-0
Anthracene oil
90640-80-5
Tar acids, coal, crude; crude phenols
65996-85-2
Cresote, wood
8021-39-4
Low temperature tar oil, alkaline; extract residues (coal), low temperature 122384-78-5
coal tar alkaline
Coal tar
8007-45-2
Annex GG. Ethylene based Glycol Ethers
2-Methoxyethanol
109-86-4
Methoxyethanol
32718-54-0
Methoxyethanol acetate
110-49-6
2-Ethoxyethanol
110-80-5
Ethoxyethanol acetate
111-15-9
Diethylene glycol dimethyl ether
111-96-6
Ethylene glycol dimethyl ether
110-71-4
Methoxyacetic acid
625-45-6
Ethoxyacetic acid
627-03-2
Annex HH. Pentachlorophenol (PCP) and its salts and esters
Pentachlorophenol
87-86-5
Sodium pentachlorophenol
131-52-2
Annex II. Lead sulfochromate yellow (C.I. Pigment Yellow 34). Please note these CAS numbers have been deleted from the CA index,
but still may be in use.
Chrome orange
8012-76-8
Chrome Orange Pigment
61513-05-1
Chrome Orange Pigment
61513-06-2
C.I. Pigment Yellow 34
61513-07-3
C.I. Pigment Yellow 34
81209-53-2
Annex JJ. Hydrofluorocarbons (HFCs)
Trifluoromethane (HFC-23)
75-46-7
Difluoromethane (HFC-32)
75-10-5
Fluoromethane (HFC-41)
593-53-3
1,1,1,2,3,4,4,5,5,5-decafluoropentane (HFC-43-10)
138495-42-8
2H, 3H-Decafluoropentane (HFC-43-10mee)
138495-42-8
Pentafluoroethane (HFC125)
354-33-6
1,1,2,2-tetrafluoroethane (HFC-134)
359-35-3
1,1,1,2-tetrafluoroethane (HFC-134a)
811-97-2
1,1,2-trifluoroethane (HFC-143)
430-66-0
1,1,1-trifluoroethane (HFC-143a)
420-46-2
1,2-Difluoroethane (HFC-152)
624-72-6
1,1-Difluoroethane (HFC-152a)
75-37-6
Monofluoroethane (Ethyl fluoride) (HFC-161)
353-36-6
1,1,1,2,3,3,3-heptafluoropropane (HFC-227ca)
431-89-0
1,1,1,2,2,3,3-heptafluoropropane (HFC-227ca)
2252-84-8
1,1,2,2,3,3-hexafluoropropane (HFC-236ca)
27070-61-7
PN 46G3772 Page 185 of 197 EC J85151 13MAY05
EC 899569 04NOV93 EC G32590 08FEB06
EC 899773 07DEC94 EC L04925B 11JAN07
EC F15040 25AUG97 EC L04925M 01AUG07
EC F73298 02SEP99 EC L04925N 19FEB08
EC F74336 05SEP00 EC L05962X 08AUG08
EC F72950 23JAN02 EC L79598 25FEB09
EC H64064 13MAY03 EC N24534E 02OCT09
EC H17205 29JUL03 EC L79598A 22FEB10
EC L79598B 22SEPT10
EC L79598C 27APR2011
EC L79598D 6SEPT2011
EC N31517Y 26MAR2012
ECN31946T 19APR2013
ECN33076 5DEC2013
ECN33076A 16MAY2014
ECN46883 17OCT2014
ECP02692 26MAY2015
ECO P02838 15OCT2015
ECOP17505 21APR2016
ECO P17633 1OCT2016
ECOP17764 20MAR2017
ECOP17905 16OCT2017
ECOP17958 Jan 25, 2018
ECOP44540 June 11, 2018
ECOP44680 Mar 5, 2019
ECOP44794 Aug 9, 2019
ECO P44877 15Feb2020
ECO P45188 1Sept2020
ECO P45272 9Mar2021
ECO P45379 18Oct2021
ECO 45443 4April2022
ECO P45475 14Nov2022
This document is the property of IBM. Its use is authorized only for responding to a request for quotation or for the performance of work for IBM. All questions must be referred to the IBM Procurement Department requesting the quotation or performance of work.
Engineering Specification
Page 186 of 197
1,1,1,2,2,3-hexafluoropropane (HFC-236cb) 1,1,1,2,3,3-hexafluoropropane (HFC-236ea) 1,1,1,3,3,3-hexafluoropropane (HFC-236fa) 1,1,2,2,3-pentafluoropropane (HFC-245ce and HFC245ca) 1,1,1,3,3-pentafluoropropane (HFC-245fa) 1,1,1,3,3-pentafluorobutane (HFC-365mfc) Heptafluorocyclopentane (HFC-c-447ef) 1,1,1,2,2,3,4,5,5,5,-decafluoropentane (HFC-43-10 mee) HFC-1234yf HFC-1234ze HFC-1336mzz HFC-1233zd HFC-1233xf Annex KK. Dibutyltin Compounds (DBT) Dibutyltin oxide Dibutyltin chloride Dibutyltin diacetate Dibutyltin dilaurate Dibutyltin hydrogen borate Dibutyltin maleate Other dibutyltin compounds Annex LL. Polycyclic aromatic hydrocarbons (PAHs) Acenaphthene Acenaphthylene Anthanthrene Anthracene (Please note this substance is also a REACH SVHC required to be reported on the PCD if present in the referenced concentration as cited in Section 2.2.3.) Benz[a]anthracene Benzo[b]fluoranthene Benzo[j]fluoranthene Benzo[k]fluoranthene Benzo[ghi]fluoranthene Benzo[a]fluorene Benzo[b]fluorene Benzo[ghi]perylene Benzo[c]phenanthrene Benzo[a]pyrene Benzo[e]pyrene Chrysene Coronene Cyclopenta[cd]pyrene Dibenz[a,h]anthracene Dibenzo[a,e]pyrene Dibenzo[ah]pyrene Dibenzo[a,i]pyrene Dibenzo[a,l]pyrene Fluoranthene Fluorene Indeno[1,2,3-cd]pyrene 5-methylchrysene 1-methylphenathrene Naphthalene Perylene Phenanthrene Pyrene Triphenylene Dibenz[a, c]anthracene Dibenz[a, j]anthracene Annex MM. Perchlorates Ammonium perchlorate Lithium perchlorate
677-56-5 431-63-0 690-39-1 679-86-7 460-73-1 406-58-6 15290-77-4 138495-42-8 Not available Not available Not available Not available Not available
818-08-6 683-18-1 1067-33-0 77-58-7 75113-37-0 78-04-6 -
83-32-9 208-96-8 191-26-4 120-12-7
56-55-3 205-99-2 205-82-3 207-08-9 203-12-3 238-84-6 243-17-4 191-24-2 195-19-7 50-32-8 192-97-2 218-01-9 191-07-1 27208-37-3 53-70-3 192-64-0 189-64-0 189-55-9 191-30-0 206-44-0 86-73-7 193-39-5 3697-24-3 832-69-9 91-20-3 198-55-0 85-01-8 129-00-0 217-59-4 215-58-7 224-41-9
7790-98-9 7791-03-9
PN 46G3772 Page 186 of 197 EC J85151 13MAY05
EC 899569 04NOV93 EC G32590 08FEB06
EC 899773 07DEC94 EC L04925B 11JAN07
EC F15040 25AUG97 EC L04925M 01AUG07
EC F73298 02SEP99 EC L04925N 19FEB08
EC F74336 05SEP00 EC L05962X 08AUG08
EC F72950 23JAN02 EC L79598 25FEB09
EC H64064 13MAY03 EC N24534E 02OCT09
EC H17205 29JUL03 EC L79598A 22FEB10
EC L79598B 22SEPT10
EC L79598C 27APR2011
EC L79598D 6SEPT2011
EC N31517Y 26MAR2012
ECN31946T 19APR2013
ECN33076 5DEC2013
ECN33076A 16MAY2014
ECN46883 17OCT2014
ECP02692 26MAY2015
ECO P02838 15OCT2015
ECOP17505 21APR2016
ECO P17633 1OCT2016
ECOP17764 20MAR2017
ECOP17905 16OCT2017
ECOP17958 Jan 25, 2018
ECOP44540 June 11, 2018
ECOP44680 Mar 5, 2019
ECOP44794 Aug 9, 2019
ECO P44877 15Feb2020
ECO P45188 1Sept2020
ECO P45272 9Mar2021
ECO P45379 18Oct2021
ECO 45443 4April2022
ECO P45475 14Nov2022
This document is the property of IBM. Its use is authorized only for responding to a request for quotation or for the performance of work for IBM. All questions must be referred to the IBM Procurement Department requesting the quotation or performance of work.
Engineering Specification
Page 187 of 197
Potassium perchlorate
7778-74-7
Sodium perchlorate
7601-89-0
Barium perchlorate
13465-95-7
Lead perchlorate
13637-76-8
Magnesium perchlorate
10034-81-8
Nickel perchlorate
13637-71-3
Annex NN. SVHC Candidate List (offered here as a reference, current and detailed list maintained by ECHA at http://echa.europa.eu/).
Authorized SVHCs are listed in Annex OO.
2-(4-tert-butylbenzyl)propionaldehyde and its individual stereoisomers:
80-54-6
2-(4-tert-butylbenzyl)propionaldehyde (2S)-3-(4-tert-butylphenyl)-2-methylpropanal
75166-30-2 75166-31-3
(2R)-3-(4-tert-butylphenyl)-2-methylpropanal
glutaral Phenol, alkylation products (mainly in para position) with C12-rich branched alkyl chains from oligomerisation, covering any individual isomers and/ or combinations thereof (PDDP)
Phenol, dodecyl-, branched 4-isododecylphenol Phenol, 4-dodecyl, branched Phenol, (tetrapropenyl) derivatives Phenol, 4-isododecy Phenol, tetrapropylene Dioctyltin dilaurate, stannane, dioctyl-, bis(coco acyloxy) derivs., and any other stannane, dioctyl-, bis(fatty acyloxy) derivs. wherein C12 is the predominant carbon number of the fatty acyloxy moiety: Dioctyltin dilaurate dioctyltin dilaurate; stannane, dioctyl-, bis(coco acyloxy) derivs. Stannane, dioctyl-, bis(coco acyloxy) derivs. Orthoboric acid, sodium salt: Boric acid, sodium salt Orthoboric acid, sodium salt Boric acid (H3BO3), disodium salt boric acid (H3BO3), sodium salt, hydrate Boric acid (H3BO3), sodium salt (1:1).: Trisodium orthoborate
1-vinylimidazole 2-methylimidazole Dibutylbis(pentane-2,4-dionato-O,O')tin Butyl 4-hydroxybenzoate (Butylparaben) Diisohexyl phthalate 2-benzyl-2-dimethylamino-4'-morpholinobutyrophenone 2-methyl-1-(4-methylthiophenyl)-2-morpholinopropan-1-one Perfluorobutane sulfonic acid (PFBS) and its salts N,N,N,-triethylethanaminium 1,1,2,2,3,3,4,4,4-nonafluorobutane-1sulfonate; Magnesium perfluorobutane sulfonate; PFBS; 1-Butanesulfonic acid, 1,1,2,2,3,3,4,4,4-nonafluoro-, lithium salt (1:1); Morpholinium perfluorobutane sulfonate; PFBS; Ammonium 1,1,2,2,3,3,4,4,4-nonafluorobutane-1-sulphonate; Sulfonium, dimethylphenyl-, salt with 1,1,2,2,3,3,4,4,4-nonafluoro-1butanesulfonic acid(1:1); Sulfonium, triphenyl-, salt with 1,1,2,2,3,3,4,4,4-nonafluoro-1butanesulfonic acid(1:1); Potassium 1,1,2,2,3,3,4,4,4-nonafluorobutane-1-sulphonate; Tetrabutyl-phosphonium nonafluoro-butane-1-sulfonate 2-methoxyethyl acetate Tris(4-nonylphenyl, branched and linear) phosphite (TNPP) with 0.1% w/w of 4-nonylphenol, branched and linear (4-NP) 2,3,3,3-tetrafluoro-2-(heptafluoropropoxy)propionic acid, its salts and its acyl halides (covering any of their individual isomers and combinations thereof)
4-tert-butylphenol Benzo[k]fluoranthene
111-30-8 121158-58-5 27459-10-5 210555-94-5 74499-35-7 27147-75-7 57427-55-1
3648-18-18 91648-39-4
1333-73-9 13840-56-7 22454-04-2 25747-83-5 14890-53-0 14312-40-4
1072-63-5 693-98-1 22673-19-4 94-26-8 71850-09-4 119313-12-1 71868-10-5
25628-08-4
507453-86-3 131651-65-5 503155-89-3 68259-10-9 220133-51-7
144317-44-2
29420-49-3 220689-12-3 110-49-6 Not available
Not available
98-54-4 207-08-9
PN 46G3772 Page 187 of 197 EC J85151 13MAY05
EC 899569 04NOV93 EC G32590 08FEB06
EC 899773 07DEC94 EC L04925B 11JAN07
EC F15040 25AUG97 EC L04925M 01AUG07
EC F73298 02SEP99 EC L04925N 19FEB08
EC F74336 05SEP00 EC L05962X 08AUG08
EC F72950 23JAN02 EC L79598 25FEB09
EC H64064 13MAY03 EC N24534E 02OCT09
EC H17205 29JUL03 EC L79598A 22FEB10
EC L79598B 22SEPT10
EC L79598C 27APR2011
EC L79598D 6SEPT2011
EC N31517Y 26MAR2012
ECN31946T 19APR2013
ECN33076 5DEC2013
ECN33076A 16MAY2014
ECN46883 17OCT2014
ECP02692 26MAY2015
ECO P02838 15OCT2015
ECOP17505 21APR2016
ECO P17633 1OCT2016
ECOP17764 20MAR2017
ECOP17905 16OCT2017
ECOP17958 Jan 25, 2018
ECOP44540 June 11, 2018
ECOP44680 Mar 5, 2019
ECOP44794 Aug 9, 2019
ECO P44877 15Feb2020
ECO P45188 1Sept2020
ECO P45272 9Mar2021
ECO P45379 18Oct2021
ECO 45443 4April2022
ECO P45475 14Nov2022
This document is the property of IBM. Its use is authorized only for responding to a request for quotation or for the performance of work for IBM. All questions must be referred to the IBM Procurement Department requesting the quotation or performance of work.
Engineering Specification
Page 188 of 197
Fluoranthene Phenanthrene Pyrene 2,2-bis(4'-hydroxyphenyl)-4-methylpentane. 1,7,7-trimethyl-3-(phenylmethylene) bicyclo [2.2.1]heptan-2-one (3benzylidene camphor) (3-Benzylidenecamphor, (3-BC)) Benzene-1,2,4-tricarboxylic acid 1,2 anhydride Benzo[ghi]perylene Decamethylcyclopentasiloxane Disodium octaborate Dodecamethylcyclohexasiloxane Ethylenediamine Lead Octamethylcyclotetrasiloxane Terphenyl, hydrogenated Dicyclohexyl phthalate (DCHP) Benzene-1,2,4-tricarboxylic acid 1,2 anhydride (trimellitic anhydride) (TMA) Chrysene Benz[a]anthracene Cadmium nitrate Cadmium hydroxide
206-44-0; 93951-69-0 85-01-8 129-00-0; 1718-52-1 6807-17-6 15087-24-8
552-30-7 191-24-2 541-02-6 12008-41-2 540-97-6 107-15-3 7439-92-1 556-67-2 61788-32-7 84-61-7 552-30-7
218-01-9 56-55-3 10325-94-7 21041-95-2
Cadmium carbonate 1,6,7,8,9,14,15,16,17,17,18,18-Dodecachloropentacyclo [12.2.1.16,9.02,13.05,10] octadeca-7,15-diene ("Dechlorane Plus"TM) [covering any of its individual anti- and syn-isomers or any combination thereof] Reaction products of 1,3,4-thiadiazolidine-2,5-dithione, formaldehyde and 4-heptylphenol, branched and linear (RP-HP) [with 0.1% w/w 4heptylphenol, branched and linear] Perfluorohexane-1-sulphonic acid and its salts (PFHXS)
4,4'-isopropylidenediphenol 4-Heptylphenol, branched and linear; substances with a linear and/or branched alkyl chain with a carbon number of 7 covalently bound predominantly in position 4 to phenol, covering also UVCB- and welldefined substances which include any of the individual isomers or a combination thereof Nonadecafluorodecanoic acid (PFDA) and its sodium and ammonium salts Nonadecafluorodecanoic acid Ammonium nonadecafluorodecanoate Decanoic acid, nonadecafluoro-, sodium salt p-(1,1-dimethylpropyl)phenol Benzo[a]pyrene (Benzo [def] chrysene) 1,3-propanesultone 2-4-di-tert-butyl-6-(5-chlorobenzotriazol-2-yl)phenol (UV-327) 2-(2H-benzotriazol-2-yl)-4-(tert-butyl)-6-(sec-butyl) phenol (UV-350) Nitrobenzene Perfluorononan-1-oic-acid and its sodium and ammonium salts Ammonium salts of perfluorononan-1-oic-acid Perfluorononan-1-oic-acid Sodium salts of perfluorononan-1-oic-acid 1,2-benzenedicarboxylic acid, di-C6-10-alkyl esters; 1,2benzenedicarboxylic acid, mixed decyl and hexyl and octyl diesters with >
513-78-0 13560-89-9
Not available
Non-exhaustive list of CAS numbers 355-46-4; 3871-99-6; 41184-65-0; 41242-12-0; 55120-77-9; 68259-08-5; 70136-72-0; 70225-16-0; 72033-41-1; 82382-12-5; 92011-17-1; 108427-54-9; 108427-55-0; 144116-10-9; 15344335-7 ; 189274-31-5; 202189-84-2; 213740-81-9; 341035-71-0; 341548-85-4; 350836-93-0; 421555-73-9; 421555-74-0; 42567070-8; 866621-50-3; 910606-39-2; 911027-68-4; 911027-69-5; 928049-42-7; 1000597-52-3; 1187817-57-7; 1310480-24-0; 1310480-27-3; 1310480-28-4; 1329995-45-0; 1329995-69-8 1462414-59-0 80-05-7 Not available
335-76-2 3108-42-7 3830-45-3 80-46-6 50-32-8 1120-71-4 3864-99-1 36437-37-3 98-95-3
4149-60-4 375-95-1 21049-39-8 68515-51-5; 68648-93-1
PN 46G3772 Page 188 of 197 EC J85151 13MAY05
EC 899569 04NOV93 EC G32590 08FEB06
EC 899773 07DEC94 EC L04925B 11JAN07
EC F15040 25AUG97 EC L04925M 01AUG07
EC F73298 02SEP99 EC L04925N 19FEB08
EC F74336 05SEP00 EC L05962X 08AUG08
EC F72950 23JAN02 EC L79598 25FEB09
EC H64064 13MAY03 EC N24534E 02OCT09
EC H17205 29JUL03 EC L79598A 22FEB10
EC L79598B 22SEPT10
EC L79598C 27APR2011
EC L79598D 6SEPT2011
EC N31517Y 26MAR2012
ECN31946T 19APR2013
ECN33076 5DEC2013
ECN33076A 16MAY2014
ECN46883 17OCT2014
ECP02692 26MAY2015
ECO P02838 15OCT2015
ECOP17505 21APR2016
ECO P17633 1OCT2016
ECOP17764 20MAR2017
ECOP17905 16OCT2017
ECOP17958 Jan 25, 2018
ECOP44540 June 11, 2018
ECOP44680 Mar 5, 2019
ECOP44794 Aug 9, 2019
ECO P44877 15Feb2020
ECO P45188 1Sept2020
ECO P45272 9Mar2021
ECO P45379 18Oct2021
ECO 45443 4April2022
ECO P45475 14Nov2022
This document is the property of IBM. Its use is authorized only for responding to a request for quotation or for the performance of work for IBM. All questions must be referred to the IBM Procurement Department requesting the quotation or performance of work.
Engineering Specification
Page 189 of 197
0.3% of dihexyl phthalate 5-sec-butyl-2-(2,4-dimethylcyclohex-3-en-1-yl)-5-methyl-1,3-dioxane [1], 5-sec-butyl-2-(4,6-dimethylcyclohex-3-en-1-yl)-5-methyl-1,3-dioxane [2] [covering any of the individual stereoisomers of [1] and [2] or any combination thereof] 2-ethylhexyl 10-ethyl-4,4-dioctyl-7-oxo-8-oxa-3,5-dithia-4stannatetradecanoate (DOTE) 2-benzotriazol-2-yl-4,6-di-tert-butylphenol (UV-320) Reaction mass of 2-ethylhexyl 10-ethyl-4,4-dioctyl-7-oxo-8-oxa-3,5dithia-4-stannatetradecanoate and 2-ethylhexyl 10-ethyl-4-[[2-[(2ethylheyxl)oxy]- 2- oxoethyl]thio]-4-octyl-7-oxo-8-oxa-3,5-dithia-4stannatetradecanoate (reaction mass of DOTE and MOTE) Cadmium fluoride Cadmium sulphate 2-(2H-benzotriazol-2-yl)-4,6-ditertpentylphenol (UV-328) Lead dipicrate 1,2-Benzenedicarboxylic acid, dihexyl ester, branched and linear Sodium perborate; perboric acid, sodium salt Sodium peroxometaborate Cadmium chloride Cadmium sulphide Disodium 4-amino-3-[[4'[(2,4-diaminophenyl)azo] [1,1'-biphenyl] -4yl]azo] -5-hydroxy-6-(phenylazo) naphthalene- 2,7-disulphonate (C.I. Direct Black 38) Dihexyl phthalate Imidazolidine-2-thione; (2-imidazoline-2-thiol) Trixylyl phosphate Disodium 3,3'-[[1,1'-biphenyl] -4,4'- diylbis (azo)] bis (4aminonaphthalene- 1- sulphonate) ( C.I. Direct Red 28) Lead di(acetate) Cadmium Cadmium oxide Ammonium pentadecafluorooctanoate (APFO) Pentadecafluorooctanoic acid (PFOA) Dipentyl phthalate (DPP) 4-Nonylphenol, branched and linear, ethoxylated [substances with a linear and/or branched alkyl chain with a carbon number of 9 covalently bound in position 4 to phenol, ethoxylated covering UVCB- and well-defined substances, polymers and homologues, which include any of the individual isomers and/or combinations thereof] Zirconia Aluminosilicate Refractory Ceramic fibers are fibers covered by index number 650-017-00-8 in Annex VI, part 3, table 3.1 of Regulation (EC) No 1272/2008 of the European Parliament and of the Council of 16 December 2008 on classification, labeling and packaging of substances and mixtures, and fulfil the three following conditions: a) oxides of aluminum, silicon and zirconium are the main components present (in the fibers) within variable concentration ranges b) fibers have a length weighted geometric mean diameter less two standard geometric errors of 6 or less micrometers (µm). c) alkaline oxide and alkali earth oxide (Na2O+K2O+CaO+MgO+BaO) content less or equal to 18% by weight Calcium arsenate Aluminosilicate Refractory Ceramic fibers are fibers covered by index number 650-017-00-8 in Annex VI, part 3, table 3.1 of Regulation (EC) No 1272/2008 of the European Parliament and of the Council of 16 December 2008 on classification, labelling and packaging of substances and mixtures, and fulfil the three following conditions: a) oxides of aluminum and silicon are the main components present (in the fibers) within variable concentration ranges b) fibres have a length weighted geometric mean diameter less two standard geometric errors of 6 or less micrometers (µm) c) alkaline oxide and alkali earth oxide (Na2O+K2O+CaO+MgO+BaO) content less or equal to 18% by weight
Not available
15571-58-1 3846-71-7 Not available
7790-79-6 10124-36-4; 31119-53-6 25973-55-1 6477-64-1 68515-50-4 15120-21-5; 11138-47-9 7632-04-4 10108-64-2 1306-23-6 1937-37-7
84-75-3 96-45-7 25155-23-1 573-58-0 301-04-2 7440-43-9 1306-19-0 3825-26-1 335-67-1 131-18-0 7311-27-5, 27942-27-4, 26027-38-3, 68412-54-4, 9016-45-9, 20427-84-3, 14409-72-4, 26571-11-9, 127087-87-0, 1119449-385, 9016-45-9, 37205-87-1, 1119449-37-4
None available
7778-44-1 None available
PN 46G3772 Page 189 of 197 EC J85151 13MAY05
EC 899569 04NOV93 EC G32590 08FEB06
EC 899773 07DEC94 EC L04925B 11JAN07
EC F15040 25AUG97 EC L04925M 01AUG07
EC F73298 02SEP99 EC L04925N 19FEB08
EC F74336 05SEP00 EC L05962X 08AUG08
EC F72950 23JAN02 EC L79598 25FEB09
EC H64064 13MAY03 EC N24534E 02OCT09
EC H17205 29JUL03 EC L79598A 22FEB10
EC L79598B 22SEPT10
EC L79598C 27APR2011
EC L79598D 6SEPT2011
EC N31517Y 26MAR2012
ECN31946T 19APR2013
ECN33076 5DEC2013
ECN33076A 16MAY2014
ECN46883 17OCT2014
ECP02692 26MAY2015
ECO P02838 15OCT2015
ECOP17505 21APR2016
ECO P17633 1OCT2016
ECOP17764 20MAR2017
ECOP17905 16OCT2017
ECOP17958 Jan 25, 2018
ECOP44540 June 11, 2018
ECOP44680 Mar 5, 2019
ECOP44794 Aug 9, 2019
ECO P44877 15Feb2020
ECO P45188 1Sept2020
ECO P45272 9Mar2021
ECO P45379 18Oct2021
ECO 45443 4April2022
ECO P45475 14Nov2022
This document is the property of IBM. Its use is authorized only for responding to a request for quotation or for the performance of work for IBM. All questions must be referred to the IBM Procurement Department requesting the quotation or performance of work.
Engineering Specification
Page 190 of 197
2-Methoxyaniline; o-Anisidine Trilead diarsenate 4-(1,1,3,3-tetramethylbutyl)phenol Bis(2-methoxyethyl) phthalate Lead diazide, Lead azide Lead styphnate Phenolphthalein Cobalt dichloride 1,2,3-Trichloropropane 1,2-Benzenedicarboxylic acid, di-C7-11-branched and linear alkyl esters 1-Methyl-2-pyrrolidone Hydrazine 2-Ethoxyethyl acetate 1,2-Benzenedicarboxylic acid, di-C6-8-branched alkyl esters, C7-rich Cobalt(II) carbonate Cobalt(II) diacetate 2-Methoxyethanol Cobalt(II) dinitrate Cobalt(II) sulphate 2-Ethoxyethanol Disodium tetraborate, anhydrous Tetraboron disodium heptaoxide, hydrate Boric acid Acrylamide Anthracene oil, anthracene-low Anthracene oil, anthracene paste, anthracene fraction Anthracene oil Anthracene oil, anthracene paste, distn. lights Pitch, coal tar, high temp. Anthracene oil, anthracene paste Bis(tributyltin)oxide (TBTO) Alkanes, C10-13, chloro (Short Chain Chlorinated Paraffins) Triethyl arsenate Anthracene Lead hydrogen arsenate Pyrochlore, antimony lead yellow 6-methoxy-m-toluidine (p-cresidine) Henicosafluoroundecanoic acid Hexahydromethylphthalic anhydride [1], Hexahydro-4-methylphthalic anhydride [2], Hexahydro-1-methylphthalic anhydride [3], Hexahydro-3methylphthalic anhydride [4] Cyclohexane-1,2-dicarboxylic anhydride [1], cis-cyclohexane-1,2dicarboxylic anhydride [2], trans-cyclohexane-1,2-dicarboxylic anhydride [3] Dibutyltin dichloride (DBTC) Lead bis(tetrafluoroborate) Lead dinitrate Silicic acid, lead salt 4-Aminoazobenzene Lead titanium zirconium oxide Lead monoxide (lead oxide) o-Toluidine 3-ethyl-2-methyl-2-(3-methylbutyl)-1,3-oxazolidine Silicic acid (H2Si2O5), barium salt (1:1), lead-doped Trilead bis(carbonate)dihydroxide Furan N,N-dimethylformamide 4-(1,1,3,3-tetramethylbutyl)phenol, ethoxylated 4-Nonylphenol, branched and linear
4,4'-methylenedi-o-toluidine Diethyl sulphate
90-04-0 3687-31-8 140-66-9 117-82-8 13424-46-9 15245-44-0 77-09-8 7646-79-9 96-18-4 68515-42-4 872-50-4 302-01-2, 7803-57-8 111-15-9 71888-89-6 513-79-1 71-48-7 109-86-4 10141-05-6 10124-43-3 110-80-5 1303-96-4, 1330-43-4, 12179-04-3 12267-73-1 10043-35-3, 11113-50-1 79-06-1 90640-82-7 91995-15-2 90640-80-5 91995-17-4 65996-93-2 90640-81-6 56-35-9 85535-84-8 15606-95-8 120-12-7 7784-40-9 8012-00-8 120-71-8 2058-94-8 25550-51-0, 19438-60-9, 48122-14-1, 57110-29-9
85-42-7, 13149-00-3, 14166-21-3
683-18-1 13814-96-5 10099-74-8 11120-22-2 60-09-3 12626-81-2 1317-36-8 95-53-4 143860-04-2 68784-75-8 1319-46-6 110-00-9 68-12-2 Not available 142731-63-3, 30784-30-6, 26543-97-5, 17404-66-9, 52427-13-1, 104-40-5, 84852-15-3, 186825-36-5, 521947-27-3, 90481-04-2, 25154-52-3, 186825-39-8, 11066-49-2 838-88-0 64-67-5
PN 46G3772 Page 190 of 197 EC J85151 13MAY05
EC 899569 04NOV93 EC G32590 08FEB06
EC 899773 07DEC94 EC L04925B 11JAN07
EC F15040 25AUG97 EC L04925M 01AUG07
EC F73298 02SEP99 EC L04925N 19FEB08
EC F74336 05SEP00 EC L05962X 08AUG08
EC F72950 23JAN02 EC L79598 25FEB09
EC H64064 13MAY03 EC N24534E 02OCT09
EC H17205 29JUL03 EC L79598A 22FEB10
EC L79598B 22SEPT10
EC L79598C 27APR2011
EC L79598D 6SEPT2011
EC N31517Y 26MAR2012
ECN31946T 19APR2013
ECN33076 5DEC2013
ECN33076A 16MAY2014
ECN46883 17OCT2014
ECP02692 26MAY2015
ECO P02838 15OCT2015
ECOP17505 21APR2016
ECO P17633 1OCT2016
ECOP17764 20MAR2017
ECOP17905 16OCT2017
ECOP17958 Jan 25, 2018
ECOP44540 June 11, 2018
ECOP44680 Mar 5, 2019
ECOP44794 Aug 9, 2019
ECO P44877 15Feb2020
ECO P45188 1Sept2020
ECO P45272 9Mar2021
ECO P45379 18Oct2021
ECO 45443 4April2022
ECO P45475 14Nov2022
This document is the property of IBM. Its use is authorized only for responding to a request for quotation or for the performance of work for IBM. All questions must be referred to the IBM Procurement Department requesting the quotation or performance of work.
Engineering Specification
Page 191 of 197
Dimethyl sulphate Lead oxide sulfate Lead titanium trioxide Acetic acid, lead salt, basic [Phthalato(2-)]dioxotrilead Bis(pentabromophenyl) ether (decabromodiphenyl ether; DecaBDE) N-methylacetamide Dinoseb (6-sec-butyl-2,4-dinitrophenol) 1,2-Diethoxyethane Tetralead trioxide sulphate N-pentyl-isopentylphthalate Dioxobis(stearato)trilead Tetraethyllead Pentalead tetraoxide sulphate Pentacosafluorotridecanoic acid Tricosafluorododecanoic acid Heptacosafluorotetradecanoic acid 1-bromopropane (n-propyl bromide) Methoxyacetic acid 4-methyl-m-phenylenediamine (toluene-2,4-diamine) Methyloxirane (Propylene oxide) Trilead dioxide phosphonate o-aminoazotoluene 1,2-Benzenedicarboxylic acid, dipentylester, branched and linear Orange lead (lead tetroxide) 4,4'-oxydianiline and its salts Biphenyl-4-ylamine Diisopentylphthalate Fatty acids, C16-18, lead salts Diazene-1,2-dicarboxamide (C,C'-azodi(formamide)) Sulfurous acid, lead salt, dibasic Lead cyanamidate ,-Bis[4-(dimethylamino)phenyl]-4 (phenylamino)naphthalene-1methanol (C.I. Solvent Blue 4) N,N,N',N'-tetramethyl-4,4'-methylenedianiline 1,3,5-tris[(2S and 2R)-2,3-epoxypropyl]-1,3,5-triazine-2,4,6-(1H,3H,5H)trione (-TGIC) Diboron trioxide 1,2-bis(2-methoxyethoxy)ethane (TEGDME; triglyme) 4,4'-bis(dimethylamino)-4''-(methylamino)trityl alcohol Lead(II) bis(methanesulfonate) Formamide [4-[4,4'-bis(dimethylamino) benzhydrylidene]cyclohexa-2,5-dien-1ylidene]dimethylammonium chloride (C.I. Basic Violet 3) 1,2-dimethoxyethane; ethylene glycol dimethyl ether (EGDME) [4-[[4-anilino-1-naphthyl][4(dimethylamino)phenyl]methylene]cyclohexa-2,5-dien-1-ylidene] dimethylammonium chloride (C.I. Basic Blue 26) 1,3,5-Tris(oxiran-2-ylmethyl)-1,3,5-triazinane-2,4,6-trione (TGIC) 4,4'-bis(dimethylamino)benzophenone (Michler's ketone) Acids generated from chromium trioxide and their oligomers. Group containing: Chromic acid Dichromic acid Oligomers of chromis acid and dichromic acid Ammonium dichromate Arsenic acid Benzyl butyl phthalate (BBP) Please note a more restrictive level is listed in Table 1 for this substance. Bis (2-ethylhexyl) phthalate (DEHP) Please note a more restrictive level is listed in Table 1 for this substance. Bis(2-methoxyethyl) ether (Diglyme) Chromium trioxide
77-78-1 12036-76-9 12060-00-3 51404-69-4 69011-06-9 1163-19-5 79-16-3 88-85-7 629-14-1 12202-17-4 776297-69-9 12578-12-0 78-00-2 12065-90-6 72629-94-8 307-55-1 376-06-7 106-94-5 625-45-6 95-80-7 75-56-9 12141-20-7 97-56-3 84777-06-0 1314-41-6 101-80-4 92-67-1 605-50-5 91031-62-8 123-77-3 62229-08-7 20837-86-9 6786-83-0
101-61-1 59653-74-6
1303-86-2 112-49-2 561-41-1 17570-76-2 75-12-7 548-62-9
110-71-4 2580-56-5
2451-62-9 90-94-8
13530-68-2 7738-94-5 Not available 7789-09-5 7778-39-4 85-68-7
117-81-7
111-96-6 1333-82-0
PN 46G3772 Page 191 of 197 EC J85151 13MAY05
EC 899569 04NOV93 EC G32590 08FEB06
EC 899773 07DEC94 EC L04925B 11JAN07
EC F15040 25AUG97 EC L04925M 01AUG07
EC F73298 02SEP99 EC L04925N 19FEB08
EC F74336 05SEP00 EC L05962X 08AUG08
EC F72950 23JAN02 EC L79598 25FEB09
EC H64064 13MAY03 EC N24534E 02OCT09
EC H17205 29JUL03 EC L79598A 22FEB10
EC L79598B 22SEPT10
EC L79598C 27APR2011
EC L79598D 6SEPT2011
EC N31517Y 26MAR2012
ECN31946T 19APR2013
ECN33076 5DEC2013
ECN33076A 16MAY2014
ECN46883 17OCT2014
ECP02692 26MAY2015
ECO P02838 15OCT2015
ECOP17505 21APR2016
ECO P17633 1OCT2016
ECOP17764 20MAR2017
ECOP17905 16OCT2017
ECOP17958 Jan 25, 2018
ECOP44540 June 11, 2018
ECOP44680 Mar 5, 2019
ECOP44794 Aug 9, 2019
ECO P44877 15Feb2020
ECO P45188 1Sept2020
ECO P45272 9Mar2021
ECO P45379 18Oct2021
ECO 45443 4April2022
ECO P45475 14Nov2022
This document is the property of IBM. Its use is authorized only for responding to a request for quotation or for the performance of work for IBM. All questions must be referred to the IBM Procurement Department requesting the quotation or performance of work.
Engineering Specification
Page 192 of 197
Diarsenic trioxide
1327-53-3
4,4'-Diaminodiphenylmethane (MDA)
101-77-9
Diarsenic pentaoxide
1303-28-2
Dibutyl phthalate (DBP) Please note a more restrictive level is listed in
84-74-2
Table 1 for this substance.
1,2-dichloroethane (EDC)
107-06-2
2,2'-dichloro-4,4'-methylenedianiline (MOCA)
101-14-4
Dichromium tris(chromate)
24613-89-6
Diisobutyl phthalate (DIBP) Please note a more restrictive level is listed in 84-69-5
Table 1 for this substance.
N,N-dimethylacetamide (DMAC)
127-19-5
2,4-Dinitrotoluene (2,4-DNT)
121-14-2
Formaldehyde, oligomeric reaction products with aniline
25214-70-4
Hexabromocyclododecane (HBCDD)
3194-55-6, 25637-99-4
alpha-hexabromocyclododecane
134237-50-6
beta-hexabromocyclododecane
134237-51-7
gamma-hexabromocyclododecane
134237-52-8
Lead chromate
7758-97-6
Lead sulfochromate yellow (C.I. Pigment Yellow 34)
1344-37-2
Lead chromate molybdate sulphate red (C.I. Pigment Red 104)
12656-85-8
Pentazinc chromate octahydroxide
49663-84-5
Potassium chromate
7789-00-6
Potassium dichromate
7778-50-9
Potassium hydroxyoctaoxodizincatedichromate
11103-86-9
Sodium chromate
7775-11-3
Sodium dichromate
7789-12-0, 10588-01-9
Strontium chromate
7789-06-2
5-tert-butyl-2,4,6-trinitro- m-xylene (Musk xylene)
81-15-2
Trichloroethylene
79-01-6
Tris (2-chloroethyl) phosphate (TCEP)
115-96-8
Annex OO. List of substances subject to REACH Authorization (current as of the date of this specification, current list maintained in
the latest REACH regulation and its amendments)
2-benzotriazol-2-yl-4,6-di-tert-butylphenol (UV-320)
3846-71-7
2-(2H-benzotriazol-2-yl)-4-(tert-butyl)-6-(sec-butyl) phenol (UV-350)
36437-37-3
2-4-di-tert-butyl-6-(5-chlorobenzotriazol-2-yl)phenol (UV-327)
3864-99-1
5-sec-butyl-2-(2,4-dimethylcyclohex-3-en-1-yl)-5-methyl-1,3-dioxane [1], 117933-89-8
5-sec-butyl-2-(4,6-dimethylcyclohex-3-en-1-yl)-5-methyl-1,3-dioxane [2]; 676367-06-9
[covering any of the individual stereoisomers of [1] and [2] or any
186309-28-4
combination thereof]
117933-89-8
676367-05-8
343934-04-3
676367-02-5
676367-07-0
676367-03-6
676367-08-1
676367-04-7
Sodium peroxometaborate
7632-04-4
Sodium perborate; perboric acid, sodium salt
15120-21-5; 11138-47-9
1,2-benzenedicarboxylic acid, di-C6-10-alkyl esters; 1,2-Benzenedicarboxylic acid, mixed decyl and hexyl and octyl diesters with 0.3% of dihexyl phthalate
68648-93-1 68515-51-5
Dihexyl phthalate
84-75-3
1,2-Benzenedicarboxylic acid, dihexyl ester, branched and linear
68515-50-4
2-(2H-benzotriazol-2-yl)-4,6-ditertpentylphenol (UV-328)
25973-55-1
Trixylyl phosphate
25155-23-1
1-Bromopropane (n-propyl bromide
106-94-5
Diisopentylphthalate
605-50-5
1,2-Benzenedicarboxylic acid, di-C6-8-branched alkyl esters, C7 rich
71888-89-6
1,2-Benzenedicarboxylic acid, di-C7-11-branched and linear alkyl esters 68515-42-4
1,2-Benzenedicarboxylic acid, dipentylester, branched and linear
84777-06-0
Bis(2-methoxyethyl) phthalate
117-82-8
Dipentyl phthalate
131-18-0
PN 46G3772 Page 192 of 197 EC J85151 13MAY05
EC 899569 04NOV93 EC G32590 08FEB06
EC 899773 07DEC94 EC L04925B 11JAN07
EC F15040 25AUG97 EC L04925M 01AUG07
EC F73298 02SEP99 EC L04925N 19FEB08
EC F74336 05SEP00 EC L05962X 08AUG08
EC F72950 23JAN02 EC L79598 25FEB09
EC H64064 13MAY03 EC N24534E 02OCT09
EC H17205 29JUL03 EC L79598A 22FEB10
EC L79598B 22SEPT10
EC L79598C 27APR2011
EC L79598D 6SEPT2011
EC N31517Y 26MAR2012
ECN31946T 19APR2013
ECN33076 5DEC2013
ECN33076A 16MAY2014
ECN46883 17OCT2014
ECP02692 26MAY2015
ECO P02838 15OCT2015
ECOP17505 21APR2016
ECO P17633 1OCT2016
ECOP17764 20MAR2017
ECOP17905 16OCT2017
ECOP17958 Jan 25, 2018
ECOP44540 June 11, 2018
ECOP44680 Mar 5, 2019
ECOP44794 Aug 9, 2019
ECO P44877 15Feb2020
ECO P45188 1Sept2020
ECO P45272 9Mar2021
ECO P45379 18Oct2021
ECO 45443 4April2022
ECO P45475 14Nov2022
This document is the property of IBM. Its use is authorized only for responding to a request for quotation or for the performance of work for IBM. All questions must be referred to the IBM Procurement Department requesting the quotation or performance of work.
Engineering Specification
Page 193 of 197
N-pentyl-isopentylphthalate Anthracene oil Pitch, coal tar, high temp. 4-(1,1,3,3-Tetramethylbutyl) phenol, ethoxylated 4-Nonylphenol, branched and linear, ethoxylated [substances with a linear and/or branched alkyl chain with a carbon number of 9 covalently bound in position 4 to phenol, ethoxylated covering UVCB- and well-defined substances, polymers and homologues, which include any of the individual isomers and/or combinations thereof] Acids generated from chromium trioxide and their oligomers. Group containing: Chromic acid Dichromic acid Oligomers of chromic acid and dichromic acid Ammonium dichromate Arsenic acid Benzyl butyl phthalate (BBP) Please note a more restrictive level is listed in Table 1 for this substance. Bis (2-ethylhexyl) phthalate (DEHP) Please note a more restrictive level is listed in Table 1 for this substance. Bis(2-methoxyethyl) ether (Diglyme) Chromium trioxide Diarsenic trioxide 4,4'-Diaminodiphenylmethane (MDA) Diarsenic pentaoxide Dibutyl phthalate (DBP) Please note a more restrictive level is listed in Table 1 for this substance. 1,2-dichloroethane 2,2'-dichloro-4,4'-methylenedianiline Dichromium tris(chromate) Diisobutyl phthalate (DIBP) Please note a more restrictive level is listed in Table 1 for this substance. 2,4-Dinitrotoluene (2,4-DNT) Formaldehyde, oligomeric reaction products with aniline Hexabromocyclododecane (HBCDD) alpha-hexabromocyclododecane beta-hexabromocyclododecane gamma-hexabromocyclododecane Lead chromate Lead sulfochromate yellow (C.I. Pigment Yellow 34) Lead chromate molybdate sulphate red (C.I. Pigment Red 104) Pentazinc chromate octahydroxide Potassium chromate Potassium dichromate Potassium hydroxyoctaoxodizincatedichromate Sodium chromate Sodium dichromate Strontium chromate 5-tert-butyl-2,4,6-trinitro- m-xylene (Musk xylene) Trichloroethylene Tris (2-chloroethyl) phosphate (TCEP)
776297-69-9 90640-80-5 65996-93-2 Not available 7311-27-5, 27942-27-4, 26027-38-3, 68412-54-4, 9016-45-9, 20427-84-3, 14409-72-4, 26571-11-9, 127087-87-0, 1119449-385, 9016-45-9, 37205-87-1, 1119449-37-4
13530-68-2 7738-94-5 Not available 7789-09-5 7778-39-4 85-68-7
117-81-7
111-96-6 1333-82-0 1327-53-3 101-77-9 1303-28-2 84-74-2
107-06-2 101-14-4 24613-89-6 84-69-5
121-14-2 25214-70-4 3194-55-6, 25637-99-4 134237-50-6 134237-51-7 134237-52-8 7758-97-6 1344-37-2 12656-85-8 49663-84-5 7789-00-6 7778-50-9 11103-86-9 7775-11-3 7789-12-0, 10588-01-9 7789-06-2 81-15-2 79-01-6 115-96-8
Annex PP. Methylenediphenyl diisocyanate (MDI) Methylenediphenyl diisocyanate (MDI) 4,4'-Methylenediphenyl diisocyanate 2,4'-Methylenediphenyl diisocyanate 2,2'-Methylenediphenyl diisocyanate
26447-40-5 101-68-8 5873-54-1 2536-05-2
Annex QQ. Benzidine-based substances 1,3-Naphthalenedi-sulfonic acid, 7-hydroxy-8-[2-[4-[2-(4-hydroxyphenyl)diazenyl][1,1biphenyl]-4-yl]diazenyl]1,3,6-Naphthalenetri-sulfonic acid, 8-hydroxy-7-[2-[4-[2-(2-hydroxy-1naphthalenyl)diazenyl][1,1-biphenyl]-4-yl]diazenyl]-, lithium salt (1:3)
117-33-9 65150-87-0
PN 46G3772 Page 193 of 197 EC J85151 13MAY05
EC 899569 04NOV93 EC G32590 08FEB06
EC 899773 07DEC94 EC L04925B 11JAN07
EC F15040 25AUG97 EC L04925M 01AUG07
EC F73298 02SEP99 EC L04925N 19FEB08
EC F74336 05SEP00 EC L05962X 08AUG08
EC F72950 23JAN02 EC L79598 25FEB09
EC H64064 13MAY03 EC N24534E 02OCT09
EC H17205 29JUL03 EC L79598A 22FEB10
EC L79598B 22SEPT10
EC L79598C 27APR2011
EC L79598D 6SEPT2011
EC N31517Y 26MAR2012
ECN31946T 19APR2013
ECN33076 5DEC2013
ECN33076A 16MAY2014
ECN46883 17OCT2014
ECP02692 26MAY2015
ECO P02838 15OCT2015
ECOP17505 21APR2016
ECO P17633 1OCT2016
ECOP17764 20MAR2017
ECOP17905 16OCT2017
ECOP17958 Jan 25, 2018
ECOP44540 June 11, 2018
ECOP44680 Mar 5, 2019
ECOP44794 Aug 9, 2019
ECO P44877 15Feb2020
ECO P45188 1Sept2020
ECO P45272 9Mar2021
ECO P45379 18Oct2021
ECO 45443 4April2022
ECO P45475 14Nov2022
This document is the property of IBM. Its use is authorized only for responding to a request for quotation or for the performance of work for IBM. All questions must be referred to the IBM Procurement Department requesting the quotation or performance of work.
Engineering Specification
Page 194 of 197
2,7-Naphthalenedi-sulfonic acid, 5-amino-3-[2-[4-[2-(7-amino-1-hydroxy-3-sulfo-2naphthalenyl)diazenyl][1,1-biphenyl]-4-yl]diazenyl]-4-hydroxy-, sodium salt (1:2) 2,7-Naphthalenedi-sulfonic acid, 4-amino-5-hydroxy-3-[2-[4-[2-[2-hydroxy-4-[(2methylphenyl)amino] phenyl]diazenyl][1,1-biphenyl]-4-yl]diazenyl]-6-(2-phenyldiazenyl)2,7-Naphthalenedi-sulfonic acid, 4-amino-5-hydroxy [[[(substituted phenylamino)] substituted phenylazo] diphenyl]azo-, phenylazo-, disodium salt. 4-(Substituted naphthalenyl)azo diphenylyl azo-substituted carbopolycycle azo benzene-sulfonic acid, sodium salt 4-(Substituted phenyl)azo biphenylyl azo-substituted carbopolycycloazo benzene-sulfonic acid, sodium salt 4-(Substituted phenyl)azo biphenylyl azo--substituted carbo-polycycle azo benzene-sulfonic acid, sodium salt Phenylazoamino-hydroxynaphthalenylazobiphenylazo substituted benzene sodium sulfonate [1,1-Biphenyl]-4,4-diamine [1,1-Biphenyl]-4,4-diamine, dihydrochloride 1-Naphthalenesulfonic acid, 3,3-[[1,1-biphenyl]-4,4-diylbis(azo)]bis[4-amino-, disodium salt (C.I. Direct Red 28) 2,7-Naphthalenedisulfonic acid, 4-amino-3-[[4-[(2,4-diaminophenyl) azo][1,1-biphenyl]-4yl]azo]-5-hydroxy-6-(phenylazo)-, disodium salt (C.I. Direct Black 38) 1-Naphthalenesulfonic acid, 8,8-[[1,1-biphenyl]-4,4-diylbis(azo)]bis[7-hydroxy-,disodium salt (C.I. Direct Red 44) 2,7-Naphthalenedisulfonic acid, 5-amino-3-[[4-[(7-amino-1-hydroxy-3-sulfo-2naphthalenyl)azo][1,1-biphenyl]-4-yl]azo]-4-hydroxy-, trisodium salt (C.I. Direct Blue 2) Benzoic acid, 5-[[4-[(1-amino-4-sulfo-2-naphthalenyl) azo][1,1-biphenyl]-4-yl]azo]-2-hydroxy,disodium salt (C.I. Direct Orange 8) Benzoic acid, 5-[[4-[[2,6-diamino-3-[[8-hydroxy-3,6-disulfo-7-[(4-sulfo-1-naphthalenyl)azo]-2naphthalenyl]azo]-5-methylphenyl]azo][1,1-biphenyl]-4-yl]azo]-2-hydroxy-, tetrasodium salt (C.I. Direct Brown 31) Benzoic acid, 5-[[4-[(7-amino-1-hydroxy-3-sulfo-2-naphthalenyl) azo][1,1-biphenyl]-4-yl]azo]-2hydroxy-, disodium salt (C.I. Direct Brown 2) 2,7-Naphthalenedisulfonic acid, 4-amino-3-[[4-[(2,4-diamino-5-methylphenyl)azo][1,1biphenyl]-4-yl]azo]-5-hydroxy-6-(phenylazo)-, disodium salt (Direct Black 4) Benzoic acid, 5-[[4-[(2-amino-8-hydroxy-6-sulfo-1-naphthalenyl)azo][1,1-biphenyl]-4-yl]azo]-2hydroxy-, disodium salt (C.I. Direct Red 1) Benzoic acid, 5-[[4-[[2,6-diamino-3-methyl-5-[(4-sulfophenyl)azo]phenyl]azo][1,1-biphenyl]-4yl]azo]-2-hydroxy-, disodium salt (C.I. Direct Brown 1:2) 2,7-Naphthalenedisulfonic acid, 3,3-[[1,1-biphenyl]-4,4-diylbis(azo)]bis[5-amino-4-hydroxy-, tetrasodium salt (C.I. Direct Blue 6] Benzoic acid, 5-[[4-[[2,4-dihydroxy-3-[(4-sulfophenyl) azo]phenyl]azo][1,1-biphenyl]-4-yl]azo]2-hydroxy-, disodium salt (C.I. Direct Brown 6) 1,3-Naphthalenedisulfonic acid, 8-[[4-[(4-ethoxyphenyl) azo][1,1-biphenyl]-4-yl]azo]-7-hydroxy,disodium salt (C.I. Direct Red 37) 1,3-Naphthalenedisulfonic acid, 7-hydroxy-8-[[4-[[4-[[(4-methylphenyl) sulfonyl]oxy]phenyl]azo][1,1-biphenyl]-4-yl]azo]-, disodium salt (C.I. Acid Red 85) 2,7-Naphthalenedisulfonic acid, 4-amino-5-hydroxy-3-[[4-[(4-hydroxyphenyl)azo][1,1-biphenyl]4- yl]azo]-6-(phenylazo)-, disodium salt (C.I. Direct Green 1) Benzoic acid, 5-[[4-[[2,4-diamino-5-[(4-sulfophenyl) azo]phenyl]azo][1,1-biphenyl]-4-yl]azo]-2hydroxy-, disodium salt (C.I. Direct Brown 1 ) 2,7-Naphthalenedisulfonic acid, 4-amino-5-hydroxy-6-[[4-[(4-hydroxyphenyl)azo][1,1-biphenyl]4-yl] azo]-3-[(4-nitrophenyl)azo]-, disodium salt (C.I. Direct Green 6) 2,7-Naphthalenedisulfonic acid, 4-amino-5-hydroxy-3-[[4-[[4-hydroxy-2-[(2methylphenyl)amino]phenyl]azo] [1,1- biphenyl]-4-yl]azo]-6-[(4-sulfophenyl) azo]-, trisodium salt (C.I. Acid Black 94) Benzoic acid, 5-[[4-[[4-[(4-amino-7-sulfo-1-naphthalenyl)azo]-6-sulfo-1-naphthalenyl]azo][1,1biphenyl]-4-yl] azo]-2-hydroxy-, trisodium salt (C.I. Direct Brown 27) Benzoic acid, 5-[[4-[[2,6-diamino-3-methyl-5-[(4-sulfophenyl)azo]phenyl] azo][1,1-biphenyl]-4yl]azo]-2- hydroxy-3-methyl-, disodium salt (C.I. Direct Brown 154) Benzoic acid, 3,3-[(3,7-disulfo-1,5-naphthalenediyl)bis [azo(6-hydroxy-3,1-phenylene)azo[6(or7)sulfo-4,1-naphthalenediyl]azo[1,1-biphenyl]-4,4-diylazo]]bis[6-hydroxy-, hexasodium salt (C.I. Direct Brown 74) Cuprate(2-), [5-[[4-[[2,6-dihydroxy-3-[(2-hydroxy-5-sulfophenyl)azo]phenyl] azo][1,1-biphenyl]4-yl]azo]-2-hydroxybenzoato(4-)]-, disodium salt (C.I. Direct Brown 95) Annex RR. Nonylphenols
Nonylphenol
68214-82-4 72379-45-4 Accession No. 21808 CAS No. CBI (NA) Accession No. 24921 CAS No. CBI (NA) Accession No. 26256 CAS No. CBI (NA) Accession No. 26267 CAS No. CBI (NA) Accession No. 26701 CAS No. CBI (NA) 92-87-5 531-85-1 573-58-0 1937-37-7 2302-97-8 2429-73-4 2429-79-0 2429-81-4
2429-82-5 2429-83-6 2429-84-7 2586-58-5 2602-46-2 2893-80-3 3530-19-6 3567-65-5 3626-28-6 3811-71-0 4335-09-5 6358-80-1
6360-29-8 6360-54-9 8014-91-3
16071-86-6
25154-52-3
PN 46G3772 Page 194 of 197 EC J85151 13MAY05
EC 899569 04NOV93 EC G32590 08FEB06
EC 899773 07DEC94 EC L04925B 11JAN07
EC F15040 25AUG97 EC L04925M 01AUG07
EC F73298 02SEP99 EC L04925N 19FEB08
EC F74336 05SEP00 EC L05962X 08AUG08
EC F72950 23JAN02 EC L79598 25FEB09
EC H64064 13MAY03 EC N24534E 02OCT09
EC H17205 29JUL03 EC L79598A 22FEB10
EC L79598B 22SEPT10
EC L79598C 27APR2011
EC L79598D 6SEPT2011
EC N31517Y 26MAR2012
ECN31946T 19APR2013
ECN33076 5DEC2013
ECN33076A 16MAY2014
ECN46883 17OCT2014
ECP02692 26MAY2015
ECO P02838 15OCT2015
ECOP17505 21APR2016
ECO P17633 1OCT2016
ECOP17764 20MAR2017
ECOP17905 16OCT2017
ECOP17958 Jan 25, 2018
ECOP44540 June 11, 2018
ECOP44680 Mar 5, 2019
ECOP44794 Aug 9, 2019
ECO P44877 15Feb2020
ECO P45188 1Sept2020
ECO P45272 9Mar2021
ECO P45379 18Oct2021
ECO 45443 4April2022
ECO P45475 14Nov2022
This document is the property of IBM. Its use is authorized only for responding to a request for quotation or for the performance of work for IBM. All questions must be referred to the IBM Procurement Department requesting the quotation or performance of work.
Engineering Specification
Page 195 of 197
p-nonyl-phenol 4-nonyl-phenol, branched= Nonylphenol, branched Isononylphenol p-Isononylphenol p-(Nonan-2-yl))phenol p-(2-Methyloctan-2-yl) phenol 4-(3-Methyloctan-3-yl) phenol o-Nonylphenol o-Isononylphenol Phenol, 2-nonyl-, branched m-Nonylphenol Neononylphenol 4-(3,5-Dimethylheptan-3-yl) phenol 4-(3,6-Dimethylheptan-3-yl)phenol 2-(Nonan-2-yl) phenol Phenol, 2-tert-nonylPhenol, sec-nonylPhenol, 4-tert-nonylPhenol, o-sec-nonylPhenol, p-sec-nonylAnnex SS. Fluorinated ethers and alcohols HFE-125 HFE-134 (HG-00) HFE-143a HCFE-235da2 (isofluorane) HFE-245cb2 HFE-245fa2 HFE-254cb2 HFE-347 mcc3 (HFE-7000) HFE-347pcf2 HFE-356pcc3 HFE-449sl (HFE-7100) HFE-569sf2 (HFE-7200) HFE-43-10pccc124 (H-Galden 1040x) HG-11 HFE-236ca12 (HG-10) HFE-338pcc13 (HG-01) HFE-347mmy1 2,2,3,3,3-pentafluoropropanol Bis(trifluoromethyl)-methanol HFE-227ea HFE-2236ea2 (desfluoran) HFE-236fa HFE-245fa1 HFE-263fb2 HFE-329 mcc2 HFE-338 mcf2 HFE-338mmz1 HFE-347 mcf2 HFE-356 mec3 HFE-356mm1 HFE-356pcf2 HFE-356pcf3 HFE-365 mcf3 HFE-347pc2 Annex TT. Perfluorinated compounds Perfluoropolymethylisopropyl-ether (PFPMIE) Trifluoromethyl sulphur pentafluoride Nitrogen trifluoride Perfluorocyclopropane
104-40-5 84852-15-3 90481-04-2 11066-49-2 26543-97-5 17404-66-9 30784-30-6 52427-13-1 136-83-4 27938-31-4 91672-41-2 139-84-4 1196678-78-0 186825-36-5 142731-63-3 17404-45-4 89585-68-2 97372-03-7 58865-77-3 27214-48-8 27072-91-9
Not available Not available Not available Not available Not available Not available Not available Not available Not available Not available Not available Not available Not available Not available Not available Not available Not available Not available Not available Not available Not available Not available Not available Not available Not available Not available Not available Not available Not available Not available Not available Not available Not available
69991-67-9 373-80-8 7783-54-2 Not available
Annex UU. Toluene Diisocyanate (this list is all inclusive)
Toluene diisocyanate trimer
9019856
PN 46G3772 Page 195 of 197 EC J85151 13MAY05
EC 899569 04NOV93 EC G32590 08FEB06
EC 899773 07DEC94 EC L04925B 11JAN07
EC F15040 25AUG97 EC L04925M 01AUG07
EC F73298 02SEP99 EC L04925N 19FEB08
EC F74336 05SEP00 EC L05962X 08AUG08
EC F72950 23JAN02 EC L79598 25FEB09
EC H64064 13MAY03 EC N24534E 02OCT09
EC H17205 29JUL03 EC L79598A 22FEB10
EC L79598B 22SEPT10
EC L79598C 27APR2011
EC L79598D 6SEPT2011
EC N31517Y 26MAR2012
ECN31946T 19APR2013
ECN33076 5DEC2013
ECN33076A 16MAY2014
ECN46883 17OCT2014
ECP02692 26MAY2015
ECO P02838 15OCT2015
ECOP17505 21APR2016
ECO P17633 1OCT2016
ECOP17764 20MAR2017
ECOP17905 16OCT2017
ECOP17958 Jan 25, 2018
ECOP44540 June 11, 2018
ECOP44680 Mar 5, 2019
ECOP44794 Aug 9, 2019
ECO P44877 15Feb2020
ECO P45188 1Sept2020
ECO P45272 9Mar2021
ECO P45379 18Oct2021
ECO 45443 4April2022
ECO P45475 14Nov2022
This document is the property of IBM. Its use is authorized only for responding to a request for quotation or for the performance of work for IBM. All questions must be referred to the IBM Procurement Department requesting the quotation or performance of work.
Engineering Specification
Page 196 of 197
Poly(toluene diisocyanate) Toluene diisocyanate dimer Toluene diisocyanate ``cyclic'' trimer 2,6-Toluene diisocyanate Note - reportable except for use in coatings, adhesives, elastomers, binders, and sealants at less than or equal to 0.1% in a Consumer Product (defined as a chemical substance that is directly, or as part of a mixture, sold or made available to consumers for their use in or around a permanent or temporary household or residence, in or around a school, or in recreation. [Source: US Code of Federal Regulations Title 40 Part 721.3 Subpart A]) 2, 4-Toluene diisocyanate. Note - reportable except for use in coatings, adhesives, elastomers, binders, and sealants at less than or equal to 0.1% in a Consumer Product (defined as a chemical substance that is directly, or as part of a mixture, sold or made available to consumers for their use in or around a permanent or temporary household or residence, in or around a school, or in recreation. [Source: US Code of Federal Regulations Title 40 Part 721.3 Subpart A]) Toluene diisocyanate unspecified isomer Note - reportable except for use in coatings, adhesives, elastomers, binders, and sealants at less than or equal to 0.1% in a Consumer Product (defined as a chemical substance that is directly, or as part of a mixture, sold or made available to consumers for their use in or around a permanent or temporary household or residence, in or around a school, or in recreation. [Source: US Code of Federal Regulations Title 40 Part 721.3 Subpart A]) Annex VV. Nonylphenol Ethoxylates Ethanol, 2-[2-(4-nonylphenoxy)ethoxy]Poly(oxy-1,2-ethanediyl), -(4-nonylphenyl)- -hydroxy3,6,9,12,15,18,21-Heptaoxatricosan-1-ol, 23- (nonylphenoxy)3,6,9,12,15,18,21,24,27-Nonaoxanonacosan-1- ol, 29-(nonylphenoxy)Ethanol, 2-(nonylphenoxy)Ethanol, 2-[2-[2-[2-(4- nonylphenoxy)ethoxy] ethoxy]ethoxy]Poly(oxy-1,2-ethanediyl), (nonylphenyl)- -hydroxy-
9017010 26747900 26603407 91087
584849
26471625
20427-84-3 26027-38-3 27177-05-5 27177-08-8 27986-36-3 7311-27-5 9016-45-9
Ethanol, 2-[2-(nonylphenoxy)ethoxy]Poly(oxy-1,2-ethanediyl), -(2- nonylphenyl)--hydroxyPoly(oxy-1,2-ethanediyl), -(isononylphenyl)- -hydroxy3,6,9,12,15,18,21,24-Octaoxahexacosan-1-ol, 26-(nonylphenoxy)Annex WW. Long-chained chlorinated paraffins Alkanes, C 18-28, chloro Paraffin oils, chloro Paraffin waxes and hydrocarbon waxes, chloro Alkanes, chloro Alkanes, C 6-18, chloro Alkanes, C 10-21, chloro Alkanes, C 10-32, chloro Alkanes, C 16-27, chloro Alkanes, C 16-35, chloro Alkanes, C 10-26, chloro Paraffins (petroleum), normal C >10, chloro Alkanes, C 18-20, chloro Alkanes, C 22-40, chloro Alkanes, C 22-26, chloro Annex XX. Small brominated alkyl alcohols 2,3-Dibromo-1-propanol 1,3-dibromopropan- 2-ol 1,4-dibromobutan-2-ol 1,4-Dibromo-2,3-butanediol 2,2-bis(bromomethyl)propane-1,3-diol 3-Bromo-2,2-bis(bromomethyl)-1-propanol 2,2-dimethylpropan-1-ol (TBNPA) 3-Bromo-2-(bromomethyl)-1-propanol 2,3-dibromobutan-1-ol 2,3,4-Tribromo-1-butanol 1,2,4-Tribromo-3-butanol 2,2-Bis(bromomethyl)-1-propanol 4,5-Dibromo-2-pentanol 1,2-Dibromo-3-pentanol 1,4-dibromo-(R*,R*)-(9CI)-3-pentanol
27176-93-8 51938-25-1 37205-87-1 26571-11-9
85535-86-0 85422-92-0 63449-39-8 61788-76-9 68920-70-7 84082-38-2 84776-06-7 84776-07-8 85049-26-9 97659-46-6 97553-43-0 106232-85-3 106232-86-4 108171-27-3
96-13-9 96-21-9 19398-47-1 14396-65-7 3296-90-0 1522-92-5 36483-57-5 106023-63-6 4021-75-4 855236-37-2 87018-38-0 105100-80-9 213821-22-8 408319-76-6 159475-15-7
PN 46G3772 Page 196 of 197 EC J85151 13MAY05
EC 899569 04NOV93 EC G32590 08FEB06
EC 899773 07DEC94 EC L04925B 11JAN07
EC F15040 25AUG97 EC L04925M 01AUG07
EC F73298 02SEP99 EC L04925N 19FEB08
EC F74336 05SEP00 EC L05962X 08AUG08
EC F72950 23JAN02 EC L79598 25FEB09
EC H64064 13MAY03 EC N24534E 02OCT09
EC H17205 29JUL03 EC L79598A 22FEB10
EC L79598B 22SEPT10
EC L79598C 27APR2011
EC L79598D 6SEPT2011
EC N31517Y 26MAR2012
ECN31946T 19APR2013
ECN33076 5DEC2013
ECN33076A 16MAY2014
ECN46883 17OCT2014
ECP02692 26MAY2015
ECO P02838 15OCT2015
ECOP17505 21APR2016
ECO P17633 1OCT2016
ECOP17764 20MAR2017
ECOP17905 16OCT2017
ECOP17958 Jan 25, 2018
ECOP44540 June 11, 2018
ECOP44680 Mar 5, 2019
ECOP44794 Aug 9, 2019
ECO P44877 15Feb2020
ECO P45188 1Sept2020
ECO P45272 9Mar2021
ECO P45379 18Oct2021
ECO 45443 4April2022
ECO P45475 14Nov2022
This document is the property of IBM. Its use is authorized only for responding to a request for quotation or for the performance of work for IBM. All questions must be referred to the IBM Procurement Department requesting the quotation or performance of work.
Engineering Specification
2,4-Dibromo-3-pentanol 3,4-Dibromo-(2R*,3S*,4S*)-(9CI)-2-pentanol 4,5-Dibromo-1-pentanol 2,5-Dibromo-1-pentanol 2-Pentanol, 1,5-dibromo2,5-Dibromo-2-pentanol 4-Bromo-2-(bromomethyl)-1-butanol 4-Bromo-2-(bromomethyl)-1,3-butanediol 3,4-Dibromo-2-butanol 3,4-Dibromo-1-butanol 3,4-Dibromo-1,2-butanediol
Annex YY. Critical Raw Materials Cerium Gallium Germanium Iridium Lanthanum Niobium Osmium Palladium Platinum Rhodium Ruthenium Samarium Scandium Tantalum Titanium Yttrium
Annex ZZ. Organophosphate Compounds Triphenyl phosphate (TPHP) Tert-Butylphenyl diphenyl phosphate bis(2-tert-butylphenyl) phenyl phosphate Isodecyl diphenyl phosphate Triethyl phosphate
7440-45-1 7440-55-3 7440-56-3 7439-88-5 7439-91-0 7440-03-1 7440-04-2 7440-05-3 7440-06-4 7440-16-6 7440-18-8 7440-19-9 7440-20-2 7440-25-7 7440-32-6 7440-65-5
115-86-6 56803-37-3 65652-41-7 29761-21-5 78-40-0
343268-04-2 76377-07-6 59287-66-0 856991-78-1 100606-66-4 213821-20-6 98069-26-2 44804-46-8 79033-40-2 87018-30-2 35330-59-7
Page 197 of 197
PN 46G3772 Page 197 of 197 EC J85151 13MAY05
EC 899569 04NOV93 EC G32590 08FEB06
EC 899773 07DEC94 EC L04925B 11JAN07
EC F15040 25AUG97 EC L04925M 01AUG07
EC F73298 02SEP99 EC L04925N 19FEB08
EC F74336 05SEP00 EC L05962X 08AUG08
EC F72950 23JAN02 EC L79598 25FEB09
EC H64064 13MAY03 EC N24534E 02OCT09
EC H17205 29JUL03 EC L79598A 22FEB10
EC L79598B 22SEPT10
EC L79598C 27APR2011
EC L79598D 6SEPT2011
EC N31517Y 26MAR2012
ECN31946T 19APR2013
ECN33076 5DEC2013
ECN33076A 16MAY2014
ECN46883 17OCT2014
ECP02692 26MAY2015
ECO P02838 15OCT2015
ECOP17505 21APR2016
ECO P17633 1OCT2016
ECOP17764 20MAR2017
ECOP17905 16OCT2017
ECOP17958 Jan 25, 2018
ECOP44540 June 11, 2018
ECOP44680 Mar 5, 2019
ECOP44794 Aug 9, 2019
ECO P44877 15Feb2020
ECO P45188 1Sept2020
ECO P45272 9Mar2021
ECO P45379 18Oct2021
ECO 45443 4April2022
ECO P45475 14Nov2022
This document is the property of IBM. Its use is authorized only for responding to a request for quotation or for the performance of work for IBM. All questions must be referred to the IBM Procurement Department requesting the quotation or performance of work.
macOS Version 12.6 (Build 21G115) Quartz PDFContext, AppendMode 1.1