Lofree Flow100 Mechanical Keyboard
Specifications and Indicators
Device Switching: During device switching, the indicator flashes for 3 seconds. After successful switching, the indicator remains on for 3 seconds.
Bluetooth Reconnection: During Bluetooth reconnection, the indicator blinks continuously. After successful reconnection, the indicator stays on for 3 seconds before returning to its previous state.
Status Indicator Behavior: The indicator stays on for 3 seconds and then turns off.
Ambient Light Control: The indicator behavior related to ambient light is described as "Indicator keeps on for 3s". Specific controls are detailed under Function Keys.
Connection Modes
- Wired Connection: Connect the keyboard to your device using the attached Type-C USB cable to establish a wired connection.
- Bluetooth Pairing: Find and pair "Flow100@Lofree" from your list of paired devices.
Function Keys
The following table outlines the function key mappings for Mac and Windows operating systems.
| Function | Mac | Windows |
|---|---|---|
| FN+F1 | Screen Brightness Down | Screen Brightness Down |
| FN+F2 | Screen Brightness Up | Screen Brightness Up |
| FN+F3 | Multi-Screen | Multi-Screen |
| FN+F4 | Search | Search |
| FN + → | Ambient Light Color Switch | |
| FN + 1 | Steady/Breathe/Off (Ambient Light Mode) | |
Safety and Compliance Information
⚠️ Warning: If the battery is not replaced properly, there is a risk of leakage, explosion, or personal injury. Do not use the battery if it exhibits leakage, discoloration, deformation, or any other abnormality.
The classification and marking of this product have been performed in accordance with the EU directive 2011/65/EU and its revised directive 2015/863/EU.
If this equipment causes harmful interference to radio or television reception, which can be determined by turning the equipment off and on, users are encouraged to try to correct the interference by one or more of the following measures:
- Reorient or relocate the receiving antenna.
- Increase the separation between the equipment and receiver.
- Connect the equipment into an outlet on a circuit different from that to which the receiver is connected.
- Consult the dealer or an experienced radio/TV technician for help.
This table is prepared in accordance with the provisions of SJ/T 11364.
