Infineon Basic Semiconductor Training for SWS - Infineon Technologies
2024/11/21 Infineon Technologies Japan K.K. SMD A JP TM FAE
restricted
1
2
Flash ROM
2024-11-21
restricted
TRAVEO T2G Body feature overview
Copyright © Infineon Technologies AG 2024. All rights reserved.
3
LVD()
2024-11-21
restricted
Copyright © Infineon Technologies AG 2024. All rights reserved.
4
PC (ECU)
CAN
USB
2024-11-21
restricted
Copyright © Infineon Technologies AG 2024. All rights reserved.
5
AURIX/TRAVEO
GHS(Green Hills Software) IAR
TRACE32 Multi IDE Embedded Workbench
PowerDebug X50 Probe I-Jet
ADS(AURIX Development Studio) ModusToolbox
AURIX TRAVEO T2G
TRAVEO T2GMulti IDE(GHS)Embedded Workbench(IAR) SDL(Sample Driver Library)
2024-11-21
restricted
Copyright © Infineon Technologies AG 2024. All rights reserved.
6
lib
ROM
IDE
Integrated Development Environment
2024-11-21
restricted
Copyright © Infineon Technologies AG 2024. All rights reserved.
7
USB
USB
()
2024-11-21
restricted
Copyright © Infineon Technologies AG 2024. All rights reserved.
8
TRAVEO T2GCYT2B75CAE(TVII-B-E-1M 100pin) IAR Embedded WorkbenchSDL CYTVII-B-E-1M-SK(Starter Kit)
USB
IAR EWSDL
2024-11-21
restricted
Copyright © Infineon Technologies AG 2024. All rights reserved.
9
AURIX TRAVEO T2G
2024-11-21
restricted
Copyright © Infineon Technologies AG 2024. All rights reserved.
10
AURIX TC3xx Standard Kit Concept
TriBoard with Socket (TR(B)_S): Early adopters boards using early samples, and QS when available
Silicon: ED where available or PD superset, early samples to QS Purpose: Board with socket, suitable for (pre-qual) silicon, easy to replace with QS or later design steps Standard Pinout Part Number: KIT_A2G_TC3xx_5V_TRB_S (5V Supply) ADAS Pinout Part Number: KIT_A2G_TC397XA_3V3_TR_S (3.3V Supply)
Standard TriBoard kit (TRB): Development boards
Silicon: ED or PD (Superset), uses qualified devices as standard Purpose: Professional board for evaluation, development and debugging Standard Pinout Part Number : KIT_ A2G_TC3xx_5V_TRB (5V Supply), KIT_ A2G_TC3xx_3V3_TRB (3.3V Supply) ADAS Pinout Part Number : KIT_ A2G_TC3xxXA_3V3_TRB (3.3V Supply)
Basic application kit (TFT): Development boards with TFT for extra evaluation
Silicon: ED or PD, only using qualified devices Purpose: For early evaluation, reduced access to signals, TFT display included Standard Pinout Part Number : KIT_ A2G_TC3xx_5V_TFT (5V Supply), KIT_ A2G_TC3xx_3V3_TFT (3V Supply) ADAS Pinout Part Number : KIT_ A2G_TC3xxxx_3V3_TFT (3.3V Supply)
iShare: goto/A2Gkits External Web: AURIX 2G Boards
2024-11-21
restricted
Copyright © Infineon Technologies AG 2024. All rights reserved.
11
Get your customer started: AURIX TC3xx Kits Standard Kit Concept
AURIX TC3xx TriBoard with Socket
AURIX TC3xx Standard TriBoard
AURIX TC3xx Basic application kit
Board with socket, suitable for (prequal) silicon, easy to replace with QS or later design steps
Available for standard and ADAS pinout's
Triboard with socket Availability
Full evaluation board for development to write and debug your 1st programs
Includes Getting Started advice, free TriCore Entry Tool Chain , technical documentation, compiler and debugger.
Low cost board for early evaluation with limited access to signals
Additional touchscreen display for convenient handling
Available for standard and ADAS pinout's for selected devices
TriBoard available for all productive silicon
Basic application kit TFT Availability
Standard Triboard Availability
2024-11-21
restricted
Copyright © Infineon Technologies AG 2024. All rights reserved.
12
Get your customer started: AURIX TC3xx Kits Standard Kit Concept
500+
350 +
149
TriBoard with Socket
Standard TriBoard
Basic application kit
TriBoard with socket, suitable for early silicon, easy to replace with QS or later design steps
All family members have socket boards With TLF35584
Full eval board for development
Write and debug your 1st programs
TC38x, TC39x, TC37x & TC35x, TC36x... available
now, with TLF35584
Low cost board for early evaluation, limited access to signals, touchscreen display
TC38x, TC39x, TC35x, TC37x ....available now,
with TLF35584
2024-11-21
restricted
Copyright © Infineon Technologies AG 2024. All rights reserved.
13
Ease of Use is now a key element of AURIX TC3xx, support is improving all the time
Available now!
99
Available now!
45
What does Ease of Use mean for AURIX TC3xx ?
TC3xx Shield Buddy
Supported by the AURIX Development Suite Mass market board to enable our wider customer
base to get started with AURIX Compatible with Arduino platform plus has 100
Arduino libraries SW support offered with code examples &
libraries (Extensions to the Arduino IDE) for several modules like Ethernet, SPI, CAN.... Has more pin headers than AURIX LITE
TC3xx AURIX LITE
Supported by the AURIX Development Suite Ultra low cost mass market board to enable
initial experimentation with AURIX Compatible with Arduino platform Additional shields for comms and memory
etc...available from mulitple sources
TC375 only
TC375 and TC334
High quality web pages and content including: Product pages, Full documentation Trainings Solution finder, Microcontroller finder... Buy online for samples & kits
AURIXTM Forum First line of support maintained by users and Infineon FAEs customers can find answers by themselves
AURIX Development Studio New IDE Expert trainings Code examples
2024-11-21
restricted
Copyright © Infineon Technologies AG 2024. All rights reserved.
14
AURIX TC3xx Secure Gateway Application Kit Main features
AURIX TC3xx Secure Gateway Application Kit
AURIX : TC377TX
Marvell 88Q5050
Hall sensor connector Power supply
Rosenberger H-MTD® connector
+12V Power Supply Inside kit
KIT_A2G_TC377_SEC_GTW Price: 799
Ready to go! - Everything you need in one package - AURIX Up to 3 CPUs at 300 MHz Up to 6 MB internal Flash/4 MB internal SRAM, Power supply, pre-flashed SW
Performance - AURIX TC377TX Up to 3 CPUs at 300 MHz & LFBGA-292 Package - High computing performance due to multi core architecture, flexibility, scalability, integrated safety and security support
Security - AURIX integrated Hardware security module (HSM) - Software solution includes Vectors MICROSAR (AUTOSAR stack on TriCore ) + MICROSAR HSM stack (for AURIX HSM) plus Infineon MCAL
Networking - 4 fixed 100Base-T1 ports, 1 x 100Base-T1 and 1 x 1000BaseT1, one RGMII port to AURIX , Legacy buses CAN FD , FlexRay and LIN.
Software Vector MICROSAR Evaluation Package
A tailored Vector MICROSAR Evaluation Bundle including DaVinci AUTOSAR configuration tooling is available for the Secure Gateway board
Many other features!
Product brief, Application Notes for Hardware and Software
2024-11-21
restricted
Copyright © Infineon Technologies AG 2024. All rights reserved.
15
AURIX TC3xx Motor Control Application Kit Main features
Kit TC3xxMOTORCTR Price: 449
AURIX TC387 Application Kit with TFT
TFT display
AURIX TC387
AURIX TC3xx Motor Control Power Board V3.x
Resolver connector
Hall sensor connector Power supply
Encoder connector
Motor
3-phase connectors
Interface to AURIX TC387 App kit
Ready to go! Everything you need in one package AURIX TC387 application kit TFT, 3-phase motor control Power board, BLDC motor with encoder, Power supply, pre-flashed SW
Performance AURIX TC387 in LFBGA-292 Package High computing performance due to multi core architecture, flexibility, scalability, integrated safety and security support
Safety
AURIX integrated safety measures up to ASILD / SIL3 Safe power supply with OPTIREG PMIC (TLF30682)
Power board Power board with TLE9180D-31QK 3-phase gate driver IC, MOSFET power stage and auxiliary components. Ideal for three phase PMSM / BLDC (12 V, max. 50 W)
Software Field oriented control (FOC) algorithm using 3-phase current sensing (EVADC) to control the torque of the motor, encoder as position sensor (GPT12) and AURIX GTM as PWM generator
Many other features! Commands and monitoring via TFT touch screen GUI (OneEye) for easy access to the microcontroller Application Notes for Hardware and Software
2024-11-21
restricted
Copyright © Infineon Technologies AG 2024. All rights reserved.
16
CYTVII-B-E-1M-SK TRAVEO T2G Body Entry evaluation hardware
Size PCB Width PCB Length
Description ~53 mm (± 5 mm) ~124 mm (± 5 mm)
Component
Description
Type
Board is compatible with Arduino
Reset button
System LEDs Current measurement jumper Power supply
Manual reset without reset controller IC. When button is pushed, reset level is LOW. Device reset is active LOW. Green LED Power monitor
Measure current consumption of the MCU only (100-mil size, No mount)
USB bus power
Power switch
None
ETM connector
None
USB connects IAR I-jet tools for device program and debug. JTAG debug connector Header (No mount) connects GHS Multi, Lauterbach, and iSYSTEM tools for
device program and debug
MiniProg3 connector Samtec FTSH-105-01-L-DV-K (No mount)
Main crystal oscillators with socket
16 MHz crystals (No mount)
MIPI-20 at back of the board (no mount)
20-pin Cortex® Debug + ETM Connector
2024-11-21
restricted
Copyright © Infineon Technologies AG 2024. All rights reserved.
17
Example: CYTVII-B-E-1M-176 Evaluation kit - TRAVEO T2G Evaluation Hardware
CYTVII-B-E-1M-176-CPU or CYTVII-B-E-176-SO
CYTVII-B-E-BB
CYTVII-B-E-1M-176-EVK components
CPU board (CYTVII-B-E-1M-176-CPU board without socket)
- Minimal functionality (JTAG, oscillator, and so on) - Different CPU boards for each package variant - CPU board optionally available with socket (CYTVII-B-E-176-SO) - Socket boards can be used for other T2G-BE products in the same package
> Base board (CYTVII-B-E-BB)
- Reuse targeted for the entire T2G-B family - Provides all required analog and digital system resources - Transceiver for CAN/LIN
2024-11-21
restricted
Copyright © Infineon Technologies AG 2024. All rights reserved.
CYTVII-B-E-1M-176 evaluation kit
18
CYTVII-B-E-BB - base boards for all T2G Body Evaluation hardware TRAVEO T2G Body common Evaluation hardware
Size PCB width PCB length
Description ~270 mm (± 5 mm) ~270 mm (± 5 mm)
Components
Description
CH
CAN-FD interface
Connector (D-sub 9-pin) and transceivers (TJA1057GT 6 channels and TJA1145T/FDJ 4 channels)
10
LIN interface Connector (D-sub 9-pin) and transceiver (TJA1021T/20)
6
I2C interface Pin header
21
SPI interface Pin header
2
CXPI interface Connector (D-sub 9-pin) and transceiver (S6BT112A01)
1
ADC interface Pin header
12
FlexRay interface Connector (D-sub 9-pin) and transceiver (AS8221)
2
PWM
Pin header
10
Potentiometer Alps RK09K1130A8G - used to control ADC
1
User button User controlled
5
User LEDs
Green LED
10
EVK connector Samtec QTH-090-03-L-D-A
2
> Designed to be used with the entire T2G-B family
> High-speed peripherals such as ethernet and memory I/F are planned to be part of the CPU board to guarantee signal integrity (applicable for T2G-BH only)
2024-11-21
restricted
Copyright © Infineon Technologies AG 2024. All rights reserved.
19
CYTVII-B-E-(1M/2M/4M)-176-CPU, CYTVII-B-E-176-SO (with socket) CYTVII-B-E-(1M/2M)-100-CPU & CYTVII-B-E-100-SO (with socket) TRAVEO T2G Body Entry Evaluation board
Parameter Length of the PCB Width of the PCB
Dimension ~150 mm (± 5 mm) ~150 mm (± 5 mm)
Component
Description
Reset
On-board reset controller IC with reset button to toggle device reset. Device reset is active LOW.
System and Power Green LEDs to monitor the various power rails on the board and a reset LED
LEDs
to indicate the device reset status
Current measurement jumpers
To measure the current consumption of the MCU
Input Power supply
12 V DC jack (5.5 mm, 2.1 mm: MJ-179P) and on-board PMIC to generate various voltage rails to the MCU (S6BP201A)
Power switch
Enable/disable power supply to the board
ETM connector
Mictor connector for connecting GHS Multi/IAR I-jet for program/debug and for obtaining trace information
JTAG 20 Pin connector
Header connects IAR I-jet, GHS Multi, Lauterbach, and iSYSTEM tools for MCU program/debug
MiniProg4 10-pin connector
Samtec FTSH-105-01-L-DV-K 10-pin connector for MCU program/debug
Main crystal oscillators 16-MHz crystal and socket (CYTVII-B-E-176-SO/CYTVII-B-E-100-SO boards
and socket
only)
1
2
3
4
Board to Board On-board Samtec high-density pin headers to connect to CYTVII-B-E-BB for
connector
extending the functionalities of the board
®
2024-11-21
restricted
Copyright © Infineon Technologies AG 2024. All rights reserved.
20
CYTVII-B-H-8M-176-CPU, CYTVII-B-H-4M-176-CPU & CYTVII-B-H-176-SO TRAVEO T2G Body High Evaluation board
Parameter PCB Width PCB Length
Dimension ~182 mm (± 5 mm) ~200 mm (± 5 mm)
Component
Description
Reset button
Reset controller IC with manual reset. When button is pushed, reset level is LOW. Device reset is active LOW.
System and Power LEDs
#3 Green LEDs for monitoring the 5 V, 3V3, and 1V1 supply rails #1 Green LED for reset monitoring
Current measurement Measure current consumption of the MCU(100-mil size) on each power rail (VDDD,
jumper
VDDIO and VDDA)
Power supply
Power switch ETM connector JTAG Debug connector MiniProg4 connector
12 V DC jack (5.5 mm, 2.1 mm: MJ-179P) and a piggy-back board with Infineon PMIC (S6BP501A) for MCU supply voltage generation Control power supply to the board 38-pin mictor and MIPI-20 connector for debug and trace Arm® standard-20 and MIPI-10 for debug only MIPI-10 to program the MCU
Main
crystal oscillators socket
and
16
MHz
crystal
and
socket
(CYTVII-B-H-176-SO
boards
only)
Ethernet PHY transceivers DP83867IR for Gigabit Ethernet (RJ45) and TJA1101B for Automotive Ethernet (Dsub-9)
Audio codec IC
TLV320AIC26 for I2S audio, with 3.5-mm audio jack (4-pin)
Serial memory interface (SMIF)
Infineon HYPERRAM
, HYPERFLASH
, and Dual Quad SEMPER
flash
SD-eMMC connector Connecting to SD Card or eMMC Adapter
USB-UART transceiver Infineon CY7C65213 for UART logging
High Density Board Samtec high-density board-to-board connectors for connecting to CYTVII-B-E-BB, Board connectors extending the functionalities of the board
Note: Actual image July vary due to continuous enhancements/updates
®
2024-11-21
restricted
Copyright © Infineon Technologies AG 2024. All rights reserved.
21
CYTVII-B-H-8M-272-CPU, CYTVII-B-H-4M-272-CPU TRAVEO T2G Body High Evaluation board
Parameter PCB Width PCB Length
Dimension ~168mm ± 5mm ~263mm ± 5mm
Component
Description
Reset button
Reset controller IC with manual reset. When button is pushed, reset level is LOW. Device reset is active LOW.
System
and
Power
LEDs
#3 #1
Green Green
LEDs for monitoring the 5V, LED for reset monitoring
3V3,
and
1V1
supply
rails
Current measurement Measure current consumption of the MCU(100-mil size) on each power rail (VDDD,
jumper
VDDIO and VDDA)
Power supply
12V DC jack (5.5 mm, 2.1 mm: MJ-179P) and a piggy-back board with Infineon PMIC (S6BP501A) for MCU supply voltage generation.
Power switch
Control power supply to the board
ETM connector
38-pin mictor and MIPI-20 connector for debug and trace
JTAG Debug connector Arm® standard-20 and MIPI-10 for debug only
MiniProg4 connector MIPI-10 to program the MCU
Main crystal oscillators and socket
16-MHz crystal and Socket (CYTVII-B-H-272-SO boards only)
Note: Actual board July vary slightly due to continuous enhancements/updates.
Ethernet PHY transceivers
Audio codec IC
DP83867IR for Gigabit Ethernet (RJ45) and TJA1100 for Automotive Ethernet (Dsub-9)
TLV320AIC26 for I2S audio, with 3.5-mm audio jack (4-pin)
Serial memory interface (SMIF)
Infineon HYPERRAM
, HYPERFLASH
, and Dual Quad SEMPER
flash
SD-eMMC connector Connecting to SD Card or eMMC Adapter
USB-UART transceiver Infineon CY7C65213 for UART logging
®
High Density Board Samtec high-density board-to-board connectors for connecting to CYTVII-B-E-BB, Board connectors extending the functionalities of the board
2024-11-21
restricted
Copyright © Infineon Technologies AG 2024. All rights reserved.
22
CYTVII-B-H-8M-320-CPU TRAVEO T2G Body High Evaluation hardware
Size PCB width PCB length
Description ~168 mm (± 5 mm) ~264 mm (± 5 mm)
Component
Reset button
System LEDs
Current measurement jumper
Power supply
Power switch ETM connector JTAG Debug connector MiniProg4 connector Main crystal oscillators
with socket
Description Reset controller IC with manual reset. When button is pushed, reset level is LOW. Device reset is active LOW. #3 Green LEDs for power monitoring on 5V, 3V3, and 1V1 rails #1 Green LED for reset monitoring Measure current consumption of the MCU only (100-mil size) on each power rail (VDDD, VDDIO, and VDDA) 12-V DC jack (5.5 mm, 2.1 mm: MJ-179P) and a piggy-back board with Infineon PMIC (S6BP501A) Control power supply to the board 38-pin mictor and MIPI-20 connector for debug and trace Arm® standard-20 and MIPI-10 for debug only MIPI-10 to program the MCU
16-MHz crystal and socket
Ethernet Audio codec Serial memory interface
(SMIF)
SD-eMMC connector
DP83867IR for gigabit ethernet (RJ45) and TJA1100 for automotive ethernet (Dsub-9) TLV320AIC26 for I2S audio, with 3.5-mm audio jack (4-pin) Infineon HYPERRAM , HYPERFLASH , and dual quad-SPI flash, to use SMIF
To connect to SD-card or eMMC adapter
USB-UART transceiver Infineon CY7C65213 for UART logs
Pin headers
To access all MCU pins
®
2024-11-21
restricted
Copyright © Infineon Technologies AG 2024. All rights reserved.
1 3
4 2
23
CYTVII-B-H-16M-320-CPU TRAVEO T2G Body High Evaluation hardware
Component Power supply
CPU System LEDs
Current measurements SDHC connector HYPER RAM HYPER FLASH QSPI Ethernet Audio codec USB to UART User led User button
JTAG debug connector ETM connector
MiniProg4 connector Pin headers
Description 12 V DC jack and piggy-back board with Infineon PMIC (S6BP501A) TRAVEO T2G Body High family MCU-CYT6BJ Three Green LEDs for power monitoring on 5 V, 3.3 V, and 1.1-V rails One Green LED for reset signal monitoring Measure current consumption of the MCU power rails via 100-mils connection on VDDD, VDDA, VDDIO, and VCCD To connect to SDHC card and eMMC via adapter Infineon 64 Mb HYPERRAM self-refresh DRAM Infineon 512 Mb HYPERFLASH NOR flash Infineon 256-Mb Dual Quad SPI flash 10/100/1000 Mbps Ethernet (RJ45) with DP83867 transceiver 10/100 Mbps Automotive Ethernet (DB9) with TJA1101 transceiver On-board I2S codec TLV320AIC26 with 3.5mm audio jack USB-UART LP bridge controller Two on-board user LEDs (LD1 and LD2) One user buttons (SW1) Arm® standard - 20pin SWD/JTAG, Arm® - MIPI 20pin SWD/JTAG 38-pin Mictor trace connector Arm® standard - MIPI 10-pin SWD Access to all the GPIO pins of MCU
2024-11-21
restricted
Copyright © Infineon Technologies AG 2024. All rights reserved.
Size PCB length PCB width
Dimension (in mm) ~264 ± 5 ~168 ± 5
24
KIT_T2G-B-E_LITE TRAVEO T2G body entry lite kit
Size PCB length PCB width
Dimension (in mm) ~130 ± 5 ~066 ± 5
Component Reset button
System/User LEDs MCU and I/O Voltage selection Pin Headers
Power Supply
Description
Manual reset. When button (SW2) is pushed, device is put into reset. The device reset is an active LOW signal System LEDs: Power (LED2), KitProg3 Mode Status (LED1) User LEDs: LED3, LED4, LED5
Dedicated 3-pin headers to choose the MCU Digital and Analog I/O voltages (J20, J21)
Powered through USB Micro-B connector to power up the board (J2)
CAN connector
JTAG Debug connector/ MiniProg4 connector
Onboard CAN transceiver for Classic CAN and CAN-FD communication Arm® standard 20-pin SWD/JTAG (J4)
Main crystal oscillator 16-MHz crystal
Arduino connecter Headers compatible with Arduino Uno R3
mikroBUS connector Headers compatible with mikroBUS shield
ADC POT
Onboard POT for Analog voltage measurement (VR1)
USB connecter
KitProg3 USB connector (Micro-B) (J2)
Pin headers
To access all MCU pins (X1,X2)
Shield2Go connector Not loaded (can be installed depending on requirement)
2024-11-21
restricted
Copyright © Infineon Technologies AG 2024. All rights reserved.
ModusToolbox support
25
KIT_T2G-B-H_EVK TRAVEO T2G body high evaluation kit
Size PCB Width PCB Length
Description ~114.3mm (± 5 mm) ~207.01mm (± 5 mm)
Component
Description
Reset button
Manual reset. When button is pushed, reset level is LOW. The device reset is active LOW
System/User LEDs
Current measurement heeders
System: Power LED (LED5), KitProg3 status LED (LED4) User: LED1,LED2,LED3
Dedicated 2-pin headers
Power supply
Connect to external 12 V/3 A DC power adapter
Power switch ETM connector JTAG Debug connector/ MiniProg4 connector
None No load parts
Arm® standard: 10-pin SWD/JTAG
Main crystal oscillator 16 MHz crystal
Ethernet Arduino connecter M.2 interface connector Serial memory interface
(SMIF)
SD-eMMC connector
Gigabit ethernet (RJ45) with PHY Headers compatible with Arduino Uno R3 Loaded parts
No load parts, Dual header compatible with Digilent Pmod
None
USB connecter Pin headers
KitProg3 USB connector (Micro-B) To access all MCU pins
2024-11-21
restricted
Copyright © Infineon Technologies AG 2024. All rights reserved.
ModusToolbox support
26
KIT_T2G-B-H_LITE TRAVEO T2G body high lite kit
Size PCB Length PCB Width
Dimension (in mm) ~130 ± 5 ~066 ± 5
Component Reset button
System/user LEDs MCU and I/O voltage selection pin headers
Power supply
Description Manual reset. When button(SW2) is pushed, device is put into reset. The device reset is an active low signal System LEDs: Power (LED2), KitProg3 mode status (LED1) User LEDs: LED3, LED4, LED5
Dedicated 3-pin headers to choose the MCU digital and analog I/O voltages (J20, J21)
Powered through USB Micro-B connector to power up the board (J2)
QSPI flash
Two onboard Infineon SEMPER flash (in the bottom)
CAN connector
JTAG debug connector/ MiniProg4 connector Main crystal oscillator
Onboard CAN transceiver for Classic CAN and CAN-FD communication Arm® standard: 20-pin SWD/JTAG (J4) 16 MHz crystal
Ethernet
10/100 Mbps ethernet (RJ45) with onboard PHY through RMII interface
Arduino connecter Headers compatible with Arduino Uno R3
mikroBUS connector Headers compatible with mikroBUS shields
ADC POT
Onboard POT for analog voltage measurement (VR1)
USB connecter
KitProg3 USB connector (Micro-B) (J2)
Pin headers
To access all MCU pins (X1,X2)
Shield2Go connector Not loaded (Can be installed depending on requirement)
2024-11-21
restricted
Copyright © Infineon Technologies AG 2024. All rights reserved.
ModusToolbox support
27
Comprehensive tools, kits, and software
Software Header files and sample driver libraries (SDL) AUTOSAR MCAL 4.2.x Self test libraries
Third-party software IDEs Green Hills Multi and IAR Embedded Workbench iSYSTEM debug and test environment und DTS
development environment
Third-party debug hardware Green Hills and SuperTrace probe IAR I-jet debugging for Arm® Cortex®-M Lauterbach
Hardware Evaluation board Lite KIT
Functional safety Safety manual FMEDAs
Third-party HMI tools Third-party HSM software
Evaluation board
Other support from Infineon SPICE-verified software services and JTAG flash
programming Auto Flash Utility
Extensive Infineon and partner development resources simplify system integration
2024-11-21
restricted
Copyright © Infineon Technologies AG 2024. All rights reserved.
28
TRAVEO T2G Lite kits supported by ModusToolbox
TRAVEOTM T2G Lite kits
KIT_T2G-B-E_LITE
KIT_T2G-B-E_LITE Fully supported by ModusToolboxTM
KIT_T2G-B-H_LITE Fully supported by ModusToolboxTM
2024-11-21
restricted
ModusToolboxTM
ModusToolbox Software is a modern, extensible development ecosystem supporting a wide range of Infineon microcontroller devices, including PSoC Arm® Cortex® microcontrollers, TRAVEO T2G Arm® Cortex® microcontroller. Provided as a collection of development tools, libraries, and embedded runtime assets, ModusToolbox Software is architected to provide a flexible and comprehensive development experience
User manual
Getting started
ModusToolboxTM product presentation
ModusToolbox product presentation
GitHub
Community support
Copyright © Infineon Technologies AG 2024. All rights reserved.
29
TRAVEO T2G Lite kits supported by ModusToolbox
TRAVEOTM T2G Lite kits
ModusToolboxTM in 3Q 2024
KIT_T2G_C-2D-4M_LITE Fully supported by ModusToolboxTM Supported by our HMI tool partners
KIT_T2G_C-2D-6M_LITE Fully supported by ModusToolboxTM Supported by our HMI tool partners
2024-11-21
restricted
ModusToolbox Software is a modern, extensible development ecosystem supporting a wide range of Infineon microcontroller devices, including PSoC Arm® Cortex® microcontrollers, TRAVEO T2G Arm® Cortex® microcontroller. Provided as a collection of development tools, libraries, and embedded runtime assets, ModusToolbox Software is architected to provide a flexible and comprehensive development experience
User manual
Getting started
ModusToolboxTM product presentation
ModusToolbox product presentation
GitHub
Community support
Copyright © Infineon Technologies AG 2024. All rights reserved.
30
TRAVEO T2G Preferred Design Houses
TRAVEO T2G preferred design houses
Our TRAVEO T2G preferred design houses is a trusted partners' ecosystem that extends the support force by tailoring their know-how to meet your specific needs.
By partnering with one of our qualified preferred design houses, you can be assured that you'll receive expert advice and customized support to help you achieve your goals. Our team of professionals brings added value to customer service, working together to optimize your design and help you succeed in your business objectives.
We understand that every customer is unique, which is why we offer tailored solutions to meet your specific needs. From product-specific support to application-specific advice, our preferred design house is fully trained to use TRAVEO T2G and provides a wealth of knowledge and expertise to help you succeed.
Together with our partners, we offer optimized customer support for systems using our products. Our preferred design houses are committed to delivering exceptional service and support to ensure your success
Supported Products
PDH
TRAVEO Body
TRAVEO Cluster
Altia Avin Systems
Candera Embedded Office
x
x
x
x
x
Embien Technologies
x
Elektrobit Automotive GmbH
x
x
G-pulse
Hightec
x
x
Hitex
x
x
L4B software
x
Macnica
x
x
Neutron Controls
x
x
QT
x
Revotech
x
x
Siili Auto
x
Techrein
x
x
Tekall
Supported Region(s)
Global EMEA AMR
JP
GC
x x
x x
x
x
x
x
x
x
x
x
x
x
x
x
2024-11-21
restricted
Copyright © Infineon Technologies AG 2024. All rights reserved.
AP
x x
x x
31
32
Microsoft PowerPoint for Microsoft 365