Installation Guide for SUNCO LIGHTING models including: Remodel Can 6, Remodel Can

REMODEL CAN 6”

T C REMODEL CAN 6” Install Guide and Manual EASY INSTALLATION 1. 4. 7. 9. 2. 3. 5. 6. 8. 10. 11. Voltage Operating Temperature Wet & Damp Aluminum 1.2lbs 10 years

• Please review instructions carefully before proceeding. Created Date: 1/12/2021 11:21:03 AM ...

Installation Manual (PDF)

Sunco 6 Pack 6 Inch Recessed Lighting Housing Can Light New Construction, Air Tight Ceiling Can, 120-277V, Hard Wired, TP24 Connector, Easy Install, IC Rated, UL Title 24 Compliant

• Google Docs
• Google Drive
• Download [pdf]
• Download Optimized
• Document:
  • Text

File Info : application/pdf, 1 Pages, 167.34KB

The Brighter Choice

REMODEL CAN 6"
Install Guide and Manual

EASY INSTALLATION

Turn Power OFF

1. Turn off the circuit breaker that provides power to the light switch for the recessed lights. ·Disconnect existing light fixture (if applicable).

4. Pull supply wire through the opening, make electrical connections.

6.30" 6" Housing

2. Locate ceiling joists in the area where you want to install the recessed light with a stud finder to ensure holes do not overlap a joist. ·Live to Live (black)
3. Use the provided template to cut a hole in the ceiling.
5. Open the junction box and connect the wires · Live to Live (black) · Neutral to Neutral (white) · Ground to Ground (yellow/green)
6. Fold the wires into the box and replace the cover.

7. Pull the four mounting clips around the perimeter of the recessed light can inward so that they are flush with the can. ·Slip the electrical cable, the junction box and the recessed light can into the hole in the ceiling until the flange is resting evenly against the drywall.

8. Insert the housing in ceiling cutout, junction box end first. The recessed can's edge should now be flush with ceiling.

9. After install in ceiling, secure with remodeling clips. · Push each clip up and outward, against the can side as shown, until it clicks. This will clamp the recessed can against the ceiling.
WARNING
To reduce the risk of fire, electric shock or injury to people: · This product should be installed in accordance with the applicable
installation code by a person familiar with the construction and operation of the product and the hazards involved. · Abide by related regional and local laws or regulations. · Proper grounding is required to ensure safety. · Check for damage during shipping prior to install. If the product is damaged, do not use it. · Turn off the switch and circuit breaker before installing this recessed can. · Use safety precautions. Safety eyeglasses and gloves are recommended. NOTE: Fixtures are classified for insulated ceilings-type IC and type-T and for suspended ceiling type-S. · Please review instructions carefully before proceeding.

10.Trim installation · Attach quick connect from housing to the can · Line up trim ring with an opening · Hook downlight springs into the housing · Push downlight into the housing until is secure
11.Turn on circuit breaker, test light

SPECIFICATIONS
Voltage Operating Temperature Suitable for Locations Ingress Housing Weight Warranty

120/277V Max 194°F Wet & Damp Aluminum 1.2lbs 10 years