Logitech Pebble 2 Combo: Connection and Easy-Switch Guide
Connect via Bluetooth®
Ensure the device is turned ON. [power switch ON]
Visual: Device power switch in the ON position.
On your computer, open Bluetooth settings and select 'Pebble K3' or 'Pebble M3' from the list of available devices to pair.
Visual: Computer screen displaying Bluetooth settings with Pebble K3 and Pebble M3 listed as discoverable devices.
✔️ Connection successful.
Connect via Logi Bolt
Insert the Logi Bolt receiver into a USB port on your computer.
Visual: Logi Bolt USB receiver being plugged into a computer.
Ensure the device is turned ON. [power switch ON]
Visual: Device power switch in the ON position.
Pair the device with your computer using the following key combinations:
- For Mac: Press and hold the fn + O keys for 3 seconds.
- For ChromeOS: Press the fn + C keys.
- For Windows: Press the fn + P keys.
Visual: Diagrams showing the specific key combinations for Mac, ChromeOS, and Windows.
✔️ Connection successful.
EASY-SWITCH: Connect Up to Three Devices
The Logitech Pebble 2 Combo features EASY-SWITCH technology, allowing you to connect and seamlessly switch between up to three different devices. Each connection is assigned a number (1, 2, or 3).
To switch between connected devices, press the corresponding numbered key (1, 2, or 3) on your keyboard.
Visual: Keyboard with dedicated keys labeled 1, 2, 3. Mouse with indicators labeled 1, 2, 3. Diagrams illustrate pairing a device to each slot using Bluetooth or Logi Bolt, including holding keys for 3 seconds for pairing.
Support and Software
❓ For detailed support and product information, visit: www.logitech.com/support/pebble-2-combo
⬇️ Enhance your productivity with the Logi Options+ software: www.logitech.com/optionsplus
Share Your Setup
Showcase your workspace on Instagram by tagging @logitech.
