Trident User Manual Reference

PACKING LIST

• Camera
• Power Adapter
• Power Cable
• Type-C Cable
• Remote Control
• User Manual
• QC certification

QUICK START

Connection Diagram Description: The diagram shows connections for the camera. An RJ45 interface connects to a PC or Switch, indicated as supporting POE (Power over Ethernet). A Type-C (USB2.0) interface connects to an HD Video Interface. A DC12V input connects to an AC Adapter, which then connects to an AC Jack for the power supply cable.

Trident Features:

• Advanced DSP, Sony 1/2.8 inch 8.42 megapixel sensor and high quality 12 megapixel lens, providing Ultra high definition output.
• USB2.0 YUY2/NV12/MJPG/H.264/H.265 video formats, compatible with Windows, MacOS, Android, and Linux OS.
• Type-C port output.
• 120° Field of View (FOV).
• Lens distortion rate less than 2%.
• Supports WDR (Wide Dynamic Range), 3DNR (3D Noise Reduction), and Anti-flicker.
• Standard UVC protocol, compatible with most UCC (Unified Communications and Collaborations) platforms.
• Low noise CMOS sensor for ultra-high signal-to-noise ratio, ensuring a clear and sharp image.
• Autoframing feature dynamically adjusts to participants entering or exiting the frame or changing positions; selectable via remote or desktop control.
• Backlight compensation to adjust for bright light sources, eliminating unnatural shadows and "light blooming".
• Preset camera positions available for quick recall in manual mode.
• High Definition Audio with 16K pickup and 24K playback for clear connections.
• Utilizes advanced spatial audio mapping and sampling to eliminate background noise, ensuring clear voice even in noisy environments.
• 360° Omni-directional microphones with a range of up to 5 meters.
• Full Duplex capability.
• 384ms Acoustic Echo Cancelation (AEC).
• Automatic Noise Suppression (ANS).
• Automatic Gain Control (AGC).
• Peak-limiting algorithm to eliminate momentary distortion.

PRODUCT SPEC

Camera Components

Diagram Description: The diagram shows the front and side views of the camera with numbered components:

• 1. Speaker
• 2. Camera lens
• 3. Status indicator light
• 4. Multi array microphone
• 5. DC12V power interface
• 6. RJ45 interface (POE)
• 7. Type-C (USB2.0) interface
• 8. Dip switch for firmware upgrades
• 9. Adjustable spindle
• 10. Rotatable bracket
• 11. Kensington® type slot

INSTALLATION MODES

Diagram Description: The diagrams illustrate three installation methods:

• Installation Method 1: Place the device on a flat surface.
• Installation Method 2: Mount the device on top of a screen using a bracket with a hinge.
• Installation Method 3: Fix the device to a wall surface using screws, with specific dimensions provided for screw hole placement.

REMOTE CONTROL

LED Indicator:

The remote control can operate up to three cameras. Camera 1 operation is standard, indicated by a red flashing LED when commands are sent. Camera 2 operation is indicated by a green LED, and Camera 3 by a blue LED.

Key Functions:

• CAM1/CAM2/CAM3: Press the colored key to select the camera.
• Zoom adjustment key (+/-): Adjusts electronic zoom, available only when manual control is selected over automatic framing.
• Power key: Standby / start camera.
• BLC: Set backlight compensation ON or OFF.
• Navigation key (Up, Down, Left, Right): In manual control mode, used to adjust electronic pan or tilt. Also used to navigate the on-screen menu.
• Confirm/Home key: In manual control mode, a quick press returns the image to the home position. When using the menu, it confirms menu options.
• Menu key: In manual control mode, a quick press enters or exits the menu.
• Volume control key: Increments or decrements the volume output of the Trident. Note: This does not affect the volume of the connected PC or device.
• Video Mute/Micro Mute: Controls video mute and microphone mute.
• A/M (Auto/Manual Frame): Switches between Auto frame and Manual frame modes.
• PUSH Frame: In Auto frame off mode, manually triggers Auto frame once.
• Preset key: Long press for 3 seconds to save the current position to a preset. Short press recalls a preset position. Available only when Auto frame is closed.
• Mirror/Flip: Used to change image orientation (mirror or flip).
• Reset: Press and hold for 3 seconds to reset camera parameters to factory settings.
• Digital key mapping: In non-menu mode, keys perform identified functions. In menu mode, keys function as numeric keys.

On Screen Display (OSD) Menu

Using the OSD Menu:

1. In normal mode, press the Menu button on the RF remote to enter the OSD menu. Press the Menu button again to exit and save parameters.
2. Use the navigation buttons to select main menu items. The selected item will highlight with a gray background, and parameters for that sub-menu will appear on the right.
3. After entering the main menu, use the up/down navigation buttons to select a sub-menu item, then use the left/right navigation buttons to adjust the parameter.
4. To return to the upper-level menu, select "Return" and press the left or right navigation button.
5. Press the OSD button once again to exit the menu.

OSD Menu Layout: