Catalyst 9800-L Deployment Guide

cisco 9800 quick start guide filetype:pdf - Google Search

File Info : application/pdf, 13 Pages, 5.22MB

guide-c07-742458

Deployment guide Cisco public
Cisco Catalyst 9800-L Wireless Controller Deployment Guide
Introduction
This document provides an overview of the Cisco® Catalyst® 9800-L Wireless Controllers and their deployment within the Cisco Digital Network Architecture.
Prerequisites
Requirements There are no specific requirements for this document. Components used This document is not restricted to specific software and hardware versions. The information in this document was created from the devices in a specific lab environment. All of the devices used in this document started with a cleared (default) configuration. If your network is live, make sure you understand the potential impact of any command. Conventions Refer to Cisco Technical Tips Conventions for more information on document conventions.
© 2020 Cisco and/or its affiliates. All rights reserved.

Deployment guide Cisco public
Contents
Introduction Prerequisites Product overview Platform support Image specifications Platform components
Front panel view Physical ports supported Supported SFP and SFP+ modules Management LEDs and behavior Rear panel view Fans High availability with SSO Licensing Summary
© 2020 Cisco and/or its affiliates. All rights reserved.

Product overview
The Cisco Catalyst 9800-L, a next-generation wireless LAN controller for the midmarket segment, is built from the ground up for intent-based networking and runs Cisco IOS® XE Software. It combines over 15 years of RF innovation from our Cisco Aironet® portfolio and offers innovative wireless technologies, such as Cisco CleanAir® and Intelligent Capture, as well as a powerful networking OS that has been modernized with a modular design to give IT greater availability, programmability, and scale.
The Cisco Catalyst 9800-L Wireless Controller is an integral part of the intent-based networking portfolio. It provides support for 5-Gbps throughput and up to 250 access points and 5000 clients to help ensure high performance and scale for midmarket business-critical networks.
Figure 1. Cisco Catalyst 9800-L Wireless Controller

Tables 1 and 2 capture some of the key specifications and attributes of the Cisco Catalyst 9800-L platform.

Table 1. Key hardware specifications

Chassis height

1 rack unit (RU)

Throughput

5 Gbps

Maximum AP support

250

Maximum client support

5000

Data ports

2x 10G/Multigigabit copper or 2x 10G/Multigigabit fiber, 4x 2.5G/1G copper

Console port

Dual RJ-45 + micro-B USB console port

USB port

Single USB 3.0

Environmental conditions supported

Operating temperature: · 32° to 113°F (0° to 45°C)
Note: The maximum temperature is derated by 1.0°C for every 1000 ft (305 m) of altitude above sea level. Nonoperating temperature: 13° to 158°F (25° to 70°C)
Operating humidity: · 10% to 95% noncondensing
Nonoperating humidity: · 0% to 95% (noncondensing)
Altitude: · Operating altitude: 0 to 3000 m (0 to 10,000 ft) · Nonoperating altitude: 0 to 12,192 m (0 to 40,000 ft)
Electrical input: · AC input frequency range: 47 to 63 Hz · AC input range: 90 to 264 VAC
Maximum power: · 9800-L-C maximum measured power: 86.9W (with 4.5W USB load) · 9800-L-F maximum measured power: 84.5W (assumes 2pc 2.5W SFP and
with 4.5W USB load)
Maximum heat dissipation: · 9800-L-C: 296.4 Btu/hr (with 4.5W USB load) · 9800-L-F: 288.2 Btu/hr (assumes 2pc 2.5W SFP and with 4.5W USB load)
Sound power level measure: · Normal: 40 dBA at 25C · Maximum: 42.9 dBA at 40C
Power adapter: · Input power: 100 to 240 VAC, 50/60 Hz

Power Dimensions and weight

79.3W
1.58 x 8.50 x 9.06 in 4.01 x 21.59 x 23.01 cm
C9800-L-C: 3.95 lb. (1.79 kg) C9800-L-F: 4.01 lb. (1.82 kg)

Table 2. Key attributes
Deployment modes
Maximum scale
Connectivity
Maximum number of rogue APs management Maximum number of rogue client management Maximum number of local users Maximum number of RFIDs Maximum VLANs supported Maximum WLANs supported
Fast secure roaming clients/maximum Pairwise Master Key (PMK) cache entries

Centralized (local), Distributed Branch (Cisco FlexConnect®), SD-Access Wireless (fabric) 250 APs 5000 clients 2x 10G/Multigigabit copper or 2x 10G/Multigigabit fiber, 4x 2.5G/1G copper 1000
2500
4000
5000 4096
4096
10,000

Max number of multicast groups
Max number of interface groups
Max number of interfaces per interface group
Max number of mobility groups
Max number of guest anchor tunnels
Max number of Access Control Lists (ACLs)
Maximum number of sleeping clients
Maximum number of web-authentication clients
Maximum number of APs per Radio Resource Management (RRM) group
Maximum AP join profiles
Maximum flex profiles
Maximum policy profiles
Maximum RF profiles
Maximum site tags
Maximum RF tags
Maximum policy tags

4096
100 64 72 72 128 5000 5000 1000
250 250 4096 500 250 250 4096

Maximum number of Application Visibility and Control (AVC) flows
Maximum number of RADIUS servers
Maximum number of Scalable Group Tags (SGTs)
Maximum number of unique security group ACLs (SGACLs)
Maximum number of access control entries (ACEs) per SGACL

80,000 17 256 64 128

Platform support
The Cisco Catalyst 9800-L Wireless Controller is available in two SKUs as an appliance:
Copper model: C98000-L-C-K9
Fiber model: C9800-L-F-K9
Both SKUs support the following 802.11ax and 802.11ac Wave 1 and Wave 2 access point models:
· Cisco Catalyst 9115AX, 9117AX, and 9120AX Series · Cisco Aironet 1800 Series, 2800, 3800,4800, 1540 Series, and 1560 Series · Cisco Aironet 1700, 2700, 3700, and 1570 Series
Image specifications
The Cisco Catalyst 9800-L Wireless Controller supports all of the features of Cisco Catalyst Wireless software release 16.12.

Platform components
Front panel view The Cisco Catalyst 9800-L Wireless Controller supports LED indicators, USB ports, console ports, 4x 2.5G/1G RJ-45 ports, and a 10G/Multigigabit port on the front panel.
Figure 2. Front panel

Physical ports supported

4 x 2.5G Ports 4 x 2.5G Ports

USB 3.0 10G/ mgig Ports
USB 3.0 10G/ mgig Ports

Console SP/RP Port
Console SP/RP Port

Data ports: · 2x 10G/Multigigabit ports that can be auto-negotiated to 1G, 2.5G, 5G, and 10G speeds. · 4x 2.5G/Multigigabit ports that can be auto-negotiated to 1G or 2.5G speeds. · Ports 0 and 1 are 10G/Multigigabit copper or 10G/1G fiber. Ports 0, 1, 2, and 3 are 2.5G/1G copper. · Service port: 1x GE port. · High Availability (HA) port: 1x GE port.

With this form factor, two controllers can be placed in the same rack to conserve rack space, as shown in Figure 3.
Figure 3. Placement of two controllers in one rack (front, back, and overhead views)

Supported SFP and SFP+ modules Network ports for this controller support the following Cisco SFP and SFP+ modules:

SFP

SFP+

· GLC-BX-D · GLC-BX-U · GLC-SX-MMD · GLC-ZX-SMD

· SFP-10G-SR · SFP-10G-SR-X · SFP-H10GB-ACU7M · SFP-H10GB-ACU10M

Management LEDs and behavior Figure 4 shows the LEDs on the front panel of the Cisco Catalyst 9800-L Wireless Controller:
1. RP (Redundancy Port) LED 2. SP (Service Port) LED 3. System LED 4. Alarm LED 5. HA (High Availability) LED
Figure 4. Front panel LEDs

Table 3. LED descriptions

LED label

Description

Power

Green when on, unlit when off

USB

Green when connected and powered on, unlit when off

1G port

Solid green when linked, blinking green with activity, and unlit when off

Multigigabit port Solid green when linked, blinking green with activity, and unlit when off

Solid Green when HA Port paired with peer controller LED Off when HA disabled

Solid Green when Linked, Blinking green with activity, and unlit when off

Table 4. System LED descriptions

Color

Description

Off Blinking Green

System not receiving power System crash Firmware upgrade Temperature error
System boot

Red

Controller error. For example, an internal voltage error exists

Table 5. Alarm LED Descriptions

Color

Description

Blinking Green Controller image upgrade

Amber

Controller status activity, such as firmware upgrade

Red

Controller error. For example, a temperature error exists

Table 6. HA (High Availability) LED

State HA disabled

Status Off

HA active

HA Hot Standby Slow Blink

Rear panel view The rear of the chassis supports: 1. 6-pin power connector for an external 12VDC/110W power adapter (C9800-AC-PWR) 2. Kensington lock feature Figure 6 shows the rear of the 9800-L controller.
Figure 5. Rear panel view

Fans An internal blower provides forced-air cooling. Fan control is based on a simple linear, closedloop, continuously variable voltage circuit that monitors the CPU temperature and external heatsink temperature. Built-in temperature hysteresis eliminates needless fan cycling.
Airflow is from front I/O side to the rear of the chassis. Do not block or obstruct airflow.

High availability with SSO

The 9800-L supports full access point and client Stateful Switchover (SSO). Client SSO is supported for clients that have already completed the authentication and Dynamic Host Configuration Protocol (DHCP) phase and have started passing traffic. With client SSO, a client's information is synced to the standby wireless controller when the client associates to the wireless controller or the client's parameters change. Fully authenticated clients--the ones in the run state--are synced to the standby, thus avoiding client re-association on switchover and making the failover seamless for the APs as well as for the clients. This process results in zero client service downtime and zero SSID outage. The overall goal for the addition of AP and client SSO support to the Cisco Catalyst 9800-L Wireless Controller is to reduce major downtime in wireless networks due to failure conditions that may occur due to box failover, network failover, or a power outage at the primary site.

Figure 6. High availability with SSO

C9800-L Copper

Active Wireless Controller

Hot-Standby Wireless Controller

C9800-L Fiber

Active Wireless Controller

Redundancy Port Connectivity RP Via L2

Hot-Standby Wireless Controller

SSO prerequisites · An HA pair can be formed only between two wireless controllers of the same form factor · Both controllers must be running the same software version in order to form an HA pair · Maximum rendezvous point (RP) link latency is 80 milliseconds Round-Trip Time (RTT), minimum
bandwidth is 60 Mbps, and minimum maximum transmission unit (MTU) is 1500

Licensing
The Cisco Catalyst 9800-L supports Smart Licensing (SL) as the default mode. The functionality is in line with the Cisco Catalyst 9800 Series Wireless Controller platforms.
License registration is supported via Cisco Smart Software, and the various supported by the Smart licensing component for connecting to the Smart Licensing Server are supported.
Specific License Registration (SLR) is also supported. Four types of licensing are available: Network Essentials with an add-on of Cisco DNA Essentials, and Network Advantage with an add-on of Cisco DNA Advantage.
Summary
The Cisco Catalyst 9800-L next-generation controller for the midmarket segment delivers a modernized modular OS that supports IT simplicity and robust security. With flexible connectivity to uplinks with copper and fiber, it offers investment protection into the future. It is open and programmable with standards-based APIs that make bridging IT processes seamless. With support for high availability and seamless software updates, it is ideal for mission-critical networks with up to 250 APs. It supports all deployment modes and seamless roaming with existing AireOS platforms as well, for a seamless migration.

countries. To view a list of Cisco trademarks, go to this URL: www.cisco.com/go/trademarks. Third-party trademarks mentioned are the property of their respective owners.

The use of the word partner does not imply a partnership relationship between Cisco and any other company. (1110R)

C07-742458-02 05/20

References

Cisco Trademarks - Cisco

Adobe InDesign 14.0 (Macintosh) Adobe PDF Library 15.0; modified using iText 2.1.7 by 1T3XT