Let's get started.
Product: GL-SFT1200 / Opal
Model: AC1200 Wireless Travel Router
Brand: GL.iNet
Setting Up Your Router
Step 1: Power On
When powered up, your router will broadcast both 2.4G and 5G Wi-Fi signals with the SSIDs: GL-SFT1200-xxx and GL-SFT1200-xxx-5G.
The router is shown with a power cable connected to its power port.
Step 2: Connect to Network
You can connect either via Wi-Fi or LAN: Connect to the Wi-Fi network named GL-SFT1200-xxx. The default Wi-Fi password is 'goodlife', which is also printed on the bottom of the router. A representation of a Wi-Fi connection screen displays the network name (SSID) 'GL-SFT1200-xxx' and a field for entering the password. Plug the network cable connecting your computer into one of the router's LAN ports. The router is depicted with a LAN cable connected to one of its LAN ports.Connect via Wi-Fi
Connect via LAN
Step 3: Set Up Router
Open your web browser and visit http://192.168.8.1. You can then start setting up your router by choosing your preferred language.
A browser address bar shows the URL http://192.168.8.1.
Support and Troubleshooting
Router Indicators and Ports
A diagram of the GL.iNet router illustrates its features: the indicator light (solid white indicates normal operation), WAN Ethernet port, LAN Ethernet ports, USB 2.0 port, power port, reset button, and mode switch.
Repair / Reset Procedures
- Network Repair: Press and hold the Reset button for 3 seconds, then release. The indicator light will turn blue and flash slowly until your network recovers.
- Factory Reset: Press and hold the Reset button for 10 seconds, then release. The indicator light will turn blue and flash rapidly. All data will be cleared when the light becomes solid blue.
Technical Support Channels
- For detailed and updated instructions, visit the website: docs.gl-inet.com.
- For further questions, you can get help via:
- Email: support@gl-inet.com
- Facebook: facebook.com/gl.inet.wifi/
- Forum: forum.gl-inet.com
- Professional forums such as OpenWrt or LEDE.
For more information, visit: https://docs.gl-inet.com/en/3/
Warranty Information
GL.iNet provides a one-year limited warranty for routers and a three-month limited warranty for accessories. Additional warranty may apply according to local laws.
Recommendations and Precautions:
- Use the included 5V/3A power adapter.
- Warranty is void if damage results from not following instructions, modifying the PCBA, components, or case, using third-party firmware, or inappropriate use (e.g., incorrect voltage, high temperature, water damage, dropping).
- Images in instructions are for reference only.
FCC Compliance:
FCC ID: 2AFIW-SFT1200. This device complies with Part 15 of the FCC Rules. Operation is subject to two conditions: (1) it may not cause harmful interference, and (2) it must accept any interference received, including interference that may cause undesired operation. Changes or modifications not expressly approved by the party responsible for compliance could void the user's authority to operate the equipment. This equipment has been tested and found to comply with the limits for a Class B digital device, pursuant to part 15 of the FCC Rules, designed to provide reasonable protection against harmful interference in a residential installation. If this equipment causes harmful interference to radio or television reception, users are encouraged to try to correct the interference by reorienting or relocating the receiving antenna, increasing separation between equipment and receiver, connecting to an outlet on a different circuit, or consulting a dealer or technician. FCC Radiation Exposure Statement: This equipment complies with FCC radiation exposure limits set forth for an uncontrolled environment and should be installed and operated with a minimum distance of 20cm between the radiator and your body. This transmitter must not be co-located or operating in conjunction with any other antenna or transmitter.
IC Compliance:
This device contains licence-exempt transmitter(s)/receiver(s) that comply with Innovation, Science and Economic Development Canada's licence-exempt RSS(s). Operation is subject to two conditions: (1) the device may not cause interference, and (2) the device must accept any interference, including interference that may cause undesired operation. This equipment complies with IC RSS-102 radiation exposure limits set forth for an uncontrolled environment and should be installed and operated with a minimum distance of 20cm between the radiator and your body.
EU Declaration of Conformity:
GL TECHNOLOGIES (HONG KONG) LIMITED declares that the radio equipment type [AC1200 Wireless Travel Router, GL-SFT1200] is in compliance with Directive 2014/53/EU. The full text of the EU declaration of conformity is available at: https://www.gl-inet.com/products/certificate.
Usage Restrictions:
- Devices operating in the 5150-5250 MHz band are for indoor use only to reduce the potential for harmful interference to co-channel mobile satellite systems.
- Functions of Wireless Access Systems including Radio Local Area Networks (WAS/RLANs) within the band 5150-5350 MHz for this device are restricted to indoor use only within all European Union countries.
Technical Specifications:
- Frequency bands: 2412~2472MHz (WIFI 2.4G); 5.15~5.25GHz (WIFI 5G); 5.725~5.875GHz (WIFI 5.8G)
- Maximum output power: WIFI 2.4G: 19.14dBm; WIFI 5G: 22.47dBm
Company Information:
Hong Kong Office: GL Technologies (Hong Kong) Limited, Unit 601, Building 5W, Hong Kong Science Park, Shatin, N.T., Hong Kong.
Shenzhen Office: Shenzhen Guanglianzhitong Tech Co., Ltd., Room 305-306, Skyworth Digital Building, Shiyan Street, Baoan District, Shenzhen, China, 518000. (+86-0755-86606126)
Certifications: FC, CE, RoHS, UKCA, PAP. (Compliant)
