6 compaction equipment technical specifications model centrifugal force lbs (kn) exciter speed vpm speed min ft (mm) engine hp (kw)1 plate width in (mm) oper. weight lbs (kg) mvh128gh*** 5,058 (22.5) 6,000 85 (26) honda gx160 4.8 (3.6) 15.8 (400) 264 (120)
Equipment Guide Construction, power and lighting Compaction Equipment Rammers......................................................................................................4 Plate Compactors ....................................................................................5-6 Rollers: Walk-Behind Single, Tandem Drum, Trench & Ride-OnTandem Drum .......................................................7-8 Generators, Air Compressors and Welders Generators: 2.5kW to 9.7kW.......................................................................9 Generators: 6kW to 1,000kW...............................................................10-13 Air Compressors .......................................................................................13 Welders ...................................................................................................... 14 Trailers Heavy-Duty Trailers.................................................................................... 15 Lighting Solutions GloBug Balloon Lights, GloBug 4-Spot Light Towers & Powered Carts .............................................................................16-18 Dewatering Equipment Pumps: Submersible................................................................................. 19 Pumps: Centrifugal....................................................................................20 Pumps:Trash and Diaphragm..............................................................21-23 Pumps: Accessories...................................................................................24 Water Trailers.............................................................................................. 25 Concrete-Masonry Technologies Equipment Pumps: Concrete/Masonry........................................................................26 Mixers: Concrete/Towable.........................................................................27 Mixers: Concrete, Mudtubs, Plaster/Mortar.......................................28-30 Rebar Benders & Cutters ..........................................................................31 Power Buggies......................................................................................32-33 Concrete Vibrators: MGX and Flex-Shaft.................................................34 Concrete Vibrators: High-Cycle.................................................................35 Screeds: DuoScreed & Truss Screed...................................................36-37 Trowels: Walk-Behind INSTACLUTCHTM, Heavy-Duty & Standard....38-39 Trowels: Ride-On Mechanical and Hydraulic......................................39-40 Chemical Sprayers....................................................................................41 Concrete Solutions...............................................................................42-43 Concrete Solutions: Alpha Concrete & Mortar Dissolver.......................44 Masonry: Diamond Blades, Cup Wheels, Grinding Discs, Diamond Core Bits.....................................................45 Ordering Information............................................................... 51 NOTE: Specifications valid at time of printing and may change due to continuous product development. Not responsible for typographical errors. The standard in high-quality equipment solutions. In business for four decades, Multiquip is one of the largest, most diversified manufacturers and suppliers of world class quality products and solutions for the construction, industrial, telecom, government, non-commercial, aerospace, entertainment, and oil and gas exploration markets. Multiquip's comprehensive product portfolio encompasses light to medium construction equipment, power generators and lighting. Servicing customers worldwide, Multiquip distributes its products in more than 70 countries through thousands of authorized distribution partners. RAMMERS MIKASA RAMMERS Features · 4 cycle engines available from Honda · Optional shoe sizes and extensions available · Cyclone air filtration system on MTX series · Cam-type clutch · Grease- and oil-bath-lubricated models Technical specifications MODEL IMPACT FORCE BLOWS LBS (KN) MIN MAX. ENGINE MAKE MODEL MTR40HF 1,215 (5.4) 695 HONDA GX100 HP (KW)1 2.8 (2.1) SHOE SIZE WIDTH IN (MM) 5.9 (150) OPER. WEIGHT LBS (KG) 101 (46) MTX50HD 2,316 (10.3) 695 HONDA GX100 2.8 (2.1) 10.4 (265) 129 (59) MTX60HD 3,064 (13.6) 695 HONDA GX100 2.8 (2.1) 10.4 (265) 141 (64) MTX70HD 3,350 (14.9) 690 HONDA GX100 2.8 (2.1) 11.2 (285) 165 (75) MTX70HDR 3,350 (14.9) 690 HONDA GXR120 3.5 (2.6) 11.2 (285) 165 (75) MTX80HDR 3,505 (15.6) 678 HONDA GXR120 3.5(2.6) 11.2 (285) 181 (82) 1 See page 50 for details. MTX SERIES RAMMERS 4 Cycle Engines Honda offerings to meet operator expectations of reliability and easy starts. MTX-series rammers feature an anti-vibration handle that significantly reduces operator fatigue. Throttle design enables contractor to control engine speed and fuel delivery with a single lever. Combination tachometer and engine hour meter provides engine RPM and helps track service intervals. 4 COMPACTION EQUIPMENT PLATE COMPACTORS MIKASA FORWARD PLATE COMPACTORS Features · Hour/tachometer standard on MVC88 series · Cyclonic pre-cleaner on select models · R emovable water tank on select models · Low-vibration handles on selected models · Cogged belt drive on MVC88 series · Open base plate design Technical specifications MODEL MVC40H MVC64VH* MVC64VHW* MVC82VH* MVC82VHW* MVC88VTH* MVC88VTHW* MVC90H CENTRIFUGAL EXCITER SPEED FORCE SPEED MIN LBS (KN) VPM FT (M) ENGINE 1,619 (7.2) 6,200 82 (25) HONDA GX100 2,275 (10.1) 5,600 82 (25) HONDA GX120 2,275 (10.1) 5,600 82 (25) HONDA GX120 3,080 (13.7) 5,600 72 (22) HONDA GX160 3,080 (13.7) 5,600 72 (22) HONDA GX160 3,372 (15) 6,000 82 (25) HONDA GX160 3,372 (15) 6,000 82 (25) HONDA GX160 3,417 (15.2) 5,800 82 (25) HONDA GX160 HP (KW)1 2.8 (2.1) 3.5 (2.6) 3.5 (2.6) 4.8 (3.6) 4.8 (3.6) 4.8 (3.6) 4.8 (3.6) 4.8 (3.6) * Wheel kit attachment optional. Urethane pad attachment optional. PLATE WIDTH IN (MM) 11.7 (295) 13.8 (350) 13.8 (350) 17.7 (450) 17.7 (450) 19.7 (500) 19.7 (500) 19.7 (500) OPER. WEIGHT LBS (KG) 110 (50) 151 (68) 157 (71) 175 (79) 181 (82) 207 (95) 229 (104) 194 (88) 1 See page 50 for details. MIKASA PAVER PLATE COMPACTORS Features · H ard rubber rollers protect pavers from scratching, chipping, breaking and dragging · Great for narrow areas and compaction alongside walls · Toolless foldable handle allows for quick and easy loading into vans and trucks · Rollers allow for easy pull back to compact on the spot · Greatly improves productivity compared to standard plate compactors Technical specifications MODEL PLATE SIZE WxL IN (MM) RUBBER EXCITER CENTRIFUGAL GASOLINE ROLLER SPEED FORCE ENGINE DIAMETER VPM (HZ) LBS (KN) IN (MM) HP RATING BHP (KW)1 MVB85H 12.60 x 17.05 2.9 5,600 2,270 HONDA 3.5 (320 x 433) (73) (93) (10.1) GX120 (2.6) MVB150H 21.89 x 29.62 3.3 5,800 3,417 HONDA 4.8 (556 x 752) (86) (97) (15.2) GX160 (3.6) WEIGHT LBS (KG) 203 (92) 348 (158) 1 See page 50 for details. COMPACTION EQUIPMENT multiquip.com 5 PLATE COMPACTORS MIKASA REVERSIBLE PLATE COMPACTORS Features · High-horsepower gasoline and diesel engines · Selected models include hour/tachometer · Selected models include cyclone pre-cleaner · Selected models include extension plates as standard · Hydraulic forward and reverse · Adjustable handle height · Compas Technology-Optional Compaction Analyzing System on select models Technical specifications MODEL CENTRIFUGAL EXCITER SPEED FORCE SPEED MIN LBS (KN) VPM FT (MM) ENGINE HP PLATE OPER. (KW)1 WIDTH WEIGHT IN (MM) LBS (KG) MVH128GH*** 5,058 (22.5) 6,000 85 (26) HONDA GX160 4.8 (3.6) 15.8 (400) 264 (120) MVH158GH*** 6,070 (27) 5,400 89 (27) HONDA GX200 5.5 (4.1) 16.9 (430) 309 (140) MVH208GH 8,318 (37) 5,200 85 (26) HONDA GX240 7.1 (5.3) 20 (510) 463 (210) MVH308GH** 10,116 (45) 4,400 79 (24) HONDA GX270 8.5 (6.3) 24 (600)* 717 (325) MVH308DZ** ^ 10,116 (45) 4,400 79 (24) HATZ 1B30 6.6 (4.9) 24 (600)* 794 (360) MVH408GH** 12,365 (55) 4,400 82 (25) HONDA GX390 11.7 (8.7) 26 (650)* 836 (379) MVH408DZ** ^ 12,365 (55) 4,400 82 (25) HATZ 1B50 9 (6.7) 26 (650)* 933 (423) MVH508GH** ^ 13,489 (60) 4,400 82 (25) HONDA GX390 11.7 (8.7) 26 (650)* 935 (425) MVH508DZ** ^ 14,613 (65) 4,150 82 (25) HATZ 1D81S 11.9 (8.9) 26 (650)* 1,182 (536) * Plate width includes 6" extensions. ** 12" extensions optional. *** Wheel kit attachment optional. Optional Compas Electric Start Models Only. ^ Electric start models do not include batteries. 1 See page 50 for details. COMPAS TECHNOLOGY Compas Advantage Removes Guesswork An easy to read LED panel turns on to guide the operator as soil stiffness increases. Compas Benefit Saves Time & Money Continuous monitoring of soil stiffness guides operator to avoid unnecessary passes and over-compaction. Compas Model Guide Electric Start Models Only Plate Model Compas Model MVH308DZ CPAS308DZ MVH408DZ MVH508GH CPAS408DZ CPAS508GH MVH508DZ CPAS508DZ 6 COMPACTION EQUIPMENT WALK-BEHIND ROLLERS WALK-BEHIND SINGLE-DRUM ROLLERS Features · Maintenance free vibratory assembly · Elongated steering handle · Plastic water tank · Three water flow adjustment settings · Hour/Tachometer · 29" wide steel drum · Adjustable transport hooks · Hydrostatic drive system Technical specifications MODEL V305EH CENTRIFUGAL FORCE LBS (KN) 3,800 (16.9) VPM 4,200 DRUM WIDTH IN (MM) 29 (737) ENGINE HONDA GX340 HP (KW)1 10.7 (7.9) START METHOD ELECTRIC/ RECOIL OPER. WEIGHT LBS (KG) 1,168 (530) 1 See page 50 for details. MIKASA WALK-BEHIND ROLLERS Features · Water tank and spray bars · Gasoline and diesel engines · Hydrostatic drive · Narrow profile · External vibrator · Front bumper and work light Technical specifications MODEL MRH800GS MRH601DS CENTRIFUGAL FORCE LBS (KN) 5,300 (23.5) 2,428 (10.8) VPM (HZ) 3,300 (55.3) 3,300 (55.3) Electric start models do not include battery. DRUM WIDTH IN (MM) 25.6 (650) 25.6 (650) ENGINE HONDA GX390 KUBOTA EA330-E3 HP (KW)1 11.7 (8.7) 6.2 (4.6) START METHOD OPER. WEIGHT LBS (KG) ELECTRIC/ RECOIL ELECTRIC/ RECOIL 1,530 (694) 1,248 (566) 1 See page 50 for details. COMPACTION EQUIPMENT multiquip.com 7 TRENCH ROLLERS RAMMAX ARTICULATING TRENCH ROLLERS Features · Articulating roller with flexible drum options for 24" and 33" working widths including removable drum rings · Durable articulation joint requires no greasing · Oscillating joint keeps drum rolls in contact with soil for optimum compaction · Yanmar engine delivers reliable starting and performance · Infrared remote charges using solar power and automatically synchronizes with the roller · Front and rear covers provide easy access to all maintenance points Technical specifications MODEL RX1575 ROLLER DRUM WIDTH IN (MM) 24 (640)/ 33 (850) CENTRIFUGAL FORCE LBS (KN) 16,860 (75) High 8,430 (37.5) Low ENGINE HP (KW)1 YANMAR 20.4 3TNV80/EPA 4F (15) OPER. WEIGHT LBS (KG) 3,087 (1,400)/ 3,197 (1,450) REMOVABLE DRUM RINGS OPTIONAL 1 See page 50 for details. RIDE-ON TANDEM DRUM ROLLERS AR14H Features · Compact design · Articulated steering · Maintenance free articulation joint and vibratory assembly · Integrated hour/tachometer · 12V power outlet and cup holder on cockpit · Easy access to service points · 35 gallon water tank Technical specifications MODEL AR14H CENTRIFUGAL VPM FORCE (HZ) LBS (KN) DRUM WIDTH IN (MM) SPEED MPH (KPH) ENGINE HP OPER. (KW)1 WEIGHT LBS (KG) 3,400 (15.1) 4,200 (70) 35.6 (904) 0-4.8 (0-7.7) HONDA GX630 20.8 (15.5) 2,688 (1,219) 1 See page 50 for details. RIDE-ON ROLLERS 8 COMPACTION EQUIPMENT PORTABLE GENERATORS MQ POWER PORTABLE GENERATORS Features · S izes ranging from 2,500 to 9,700 watts · T wo-year warranty · V oltage regulation maintained within ± 3% · B rushless design minimizes maintenance · Idle control on GA 36, GA 6, GA 97 and DA 7000SSA3 models · O ptional wheel kits available for GA 25, GA 97, DA 7000SSA3 models · A ll receptacles GFCI protected (USA only) Technical specifications MODEL GA25HR GA36HR GA6HR GA6HRS* GA97HEA DA7000SSA3 WATTS MAX/CONT 2,500/2,200 3,600/3,200 6,000/5,000 6,000/5,000 9,700/8,400 7,000/6,000 VOLTAGE 120V 120V/ 240V 120V/ 240V 120V/ 240V 120V/ 240V 120V/ 240V AMPERAGE ENGINE HP STARTER MAX/CONT (KW)1 TYPE 20.8/18.3@120V HONDA GX160 4.8 (3.6) RECOIL 30/26.6@120V 15/13.3@240V HONDA GX240 7.9 (5.9) RECOIL 50/41.6@120V HONDA 10.7 25/20.8@240V GX340 (8.0) RECOIL 50/41.6@120V HONDA 10.7 ELECTRIC/ 25/20.8@240V GX340 (8.0) RECOIL 80.8/70@120V 40.4/35@240V HONDA GX630 20.8 (15.5) ELECTRIC 58.3/50@120V KUBOTA 29.2/25@240V Z482 12.5 (9.3) ELECTRIC DRY WEIGHT LBS (KG) 110 (50) 174 (79) 200 (90) 218 (99) 342 (155) 527 (239) CANADIAN SPECIFICATIONS GAC25HR 2,500/2,200 GAC36HR 3,600/3,200 GAC6HR 6,000/5,000 GAC6HRS* 6,000/5,000 GAC97HEA 9,700/8,400 DAC7000SSA3 7,000/6,000 120V 120V/ 240V 120V/ 240V 120V/ 240V 120V/ 240V 120V/ 240V 20.8/18.3@120V HONDA GX160 4.8 (3.6) RECOIL 112 (51) 30/26.6@120V HONDA 7.9 15/13.3@240V GX240 (5.9) RECOIL 176 (80) 50/41.6@120V HONDA 10.7 25/20.8@240V GX340 (8.0) RECOIL 198 (90) 50/41.6@120V HONDA 10.7 ELECTRIC/ 220 25/20.8@240V GX340 (8.0) RECOIL (100) 80.8/70@120V HONDA 40.4/35@240V GX610 16.6 (12.4) ELECTRIC 341 (155) 58.3/50@120V KUBOTA 29.2/25@240V Z482 12.5 (9.3) ELECTRIC 529 (240) * Optional battery available. Canada only. 1 See page 50 for details. See page 35 for high-cycle generators for FXA vibrators GENERATORS multiquip.com 9 MOBILE GENERATORS MQ POWER WHISPERWATT Features · Ideal for portable, standby and special events · Highway-legal trailers and auxiliary fuel tanks available · Patented Open-Delta generator offers "best in class" motor starting · Excellent voltage and frequency regulation Optional trailer · Designed for low-noise operation - surpasses OSHA standards · Full engine and generator instrumentation · Equipped with Tier 4 engines Technical specifications 7-36 kVASingle Phase MODEL DCA 6SPX4F DA 7000SSA3 DCA 10SPXU4C DCA 15SPXU4F DCA 20SPXU4F DCA 36SPXU4F STANDBY PRIME AMPS AMPS AMPS AMPS WET TRAILER OUTPUT OUTPUT 1-PHASE 1-PHASE 3-PHASE 3-PHASE WEIGHT KW (KVA) KW (KVA) 120V 240V 240V 480V LBS (KG) 6 (6) 25 (2 SETS) 25 836 (379) TRLRMP(XF) 7 (7) 6 (6) 25 (2 SETS) 25 582 (264) TRLRMP(XF) 11 (11) 10 (10) 41.7 (2 SETS) 41.7A 1,250 (567) TRLRMP(XF) 14 (14) 14.7 (14.7) 58.3A (2 SETS) 58.3A 1,397 (620) TRLR25US2 22 (22) 20 (20) 83A (2 SETS) 83A 2,138 (970) TRLR25US2 40 (40) 36 (36) 150A (2 SETS) 150A 3,087 (1,400) TRLR45 Technical specifications 7-600 kVASingle/Three Phase MODEL STANDBY PRIME AMPS AMPS AMPS AMPS WET TRAILER OUTPUT OUTPUT 1-PHASE 1-PHASE 3-PHASE 3-PHASE WEIGHT KW (KVA) KW (KVA) 120V 240V 240V 480V LBS (KG) TLG 8SSK4F2 6.4 (8) 6 (7.5) 18A 646 (293) TRLRMP(XF) DCA 25SSIU4F 22 (27.5) 20 (25) 60A x 2 60A (ZIGZAG) (ZIGZAG) 60A 30A 2,138 (970) TRLR25US2 DCA 29.7 40SSKU4F2 (37) 28.8 (36) 108A x 2 108A (ZIGZAG) (ZIGZAG) 86A 43A 2,823 (1,280) TRLR45 DCA 45SSIU4F 40 (50) 36 (45) 108A x 2 108A (ZIGZAG) (ZIGZAG) 108A 54A 2,976 (1,350) TRLR45 DCA 70SSIU4F 62 (77) 56 (70) 168A x 2 168A (ZIGZAG) (ZIGZAG) 168A 84A 4,211 (1,910) TRLR70US DCA 70SSJU4F 62 (77) 56 (70) 168A x2 168A (ZIGZAG) (ZIGZAG) 168A 84A 4,211 (1,910) TRLR75XF2 DCA 125SSIU4F 110 (137.5) 100 (125) 300A x 2 300A (ZIGZAG) (ZIGZAG) 300A 150A 6,702 (3,040) TRLR125US DCA 132 150SSJU4F3 (165) 120 (150) 361A x 2 361A (ZIGZAG) (ZIGZAG) 361A 180A 10,869 (4,930) TRLR180EV DCA 158 180SSJU4F3 (198) 144 (180) 400 200 (4-WIRE) (4-WIRE) 433A 216A 11,266 (5,110) TRLR180EV DCA 194 220SSJU4F3 (242) 176 (220) 489A 244.4A (4-WIRE) (4-WIRE) 529A 264.5A 8,489 (3,850) TRLR220EV DCA 264 300SSJU4F3 (330) 240 (300) 666.7A 333.3A (4-WIRE) (4-WIRE) 722A 360A 15,010 (6,810) TRLR300EV DCA 400SSI4F3 336 (420) 320 (400) 888.9A 444.4A (4-WIRE) (4-WIRE) 962.3A 481.1A 13,184 TRLR (5,980) 400XF3DAE DCA 600SSV4F3 528 (660) 480 (600) 1333.3A (4-WIRE) 666.7A (4-WIRE) 1443.4A 721.7A 19,114 TRLR (8,670) 600XFBP3E 10 GENERATORS MOBILE GENERATORS DEF REPLENISHMENT SYSTEM Features · H igh capacity tank holds up to 100 gallons (379 I) of DEF · C ompact design simplifies transport and placement on site · C AN bus DEF level monitoring for any Tier 4 Final diesel engine · A pplication Flexibility automatically maintains DEF level on one or two engines simultaneously, unattended* · E xtends engine runtime and reduces the frequency of costly refilling · A utomatically purges supply lines to ensure that DEF quality is maintained after each replenishment cycle Technical specifications MODEL NUMBER OF GENERATORS AMPERAGE REQ'S DEFTANK1* 1 5A DEFTANK2* 2 5A x2 * Diesel exhaust fluid; complies with ISO-22241 EXTERNAL HOSE LENGTH 25 FT 25 FT x2 COMM WET WEIGHT CABLE LBS (KG) 25 FT 1,903 (863) 25 FT x2 1,903 (863) GENERATORS multiquip.com 11 MOBILE GENERATORS MQ POWER CONTAINER GENERATORS Features · Specially-designed container · 4" full containment · Ideal for portable and standby · Volvo Tier-4 heavy-duty diesel engine · Basler DGC2020HD digital genset control Technical specifications MODEL CG 500V4F CG 500DUAL STANDBY OUTPUT KW (KVA) 550 (687) 1,000 (1,250) PRIME OUTPUT KW (KVA) 500 (625) 900 (1,125) AMPS 3-PHASE 208V STANDBY/ PRIME 1908A 1908A x 2 Optional trailer AMPS 3-PHASE 480V STANDBY/ PRIME 827A 827A x 2 FUEL TANK/DEF CAPACITY GAL 1,000/84 1,000/168 MQ POWER STUDIO GENERATORS Features · Heavy-duty diesel engine EPA Tier 4 Final · Sound-attenuated aluminum housing · 6 set - Camlok receptacles mounted on waterfall panel · Instrument panel with LED gauges (Volts, Amps & Hz) · ComAp Digital Controller and color display Technical specifications MODEL PRIME OUTPUT KW SG 1400C4F 168 SG 1600C4F 192 AMPS 3-PHASE 120/208 PRIME 1,400 1,600 Optional trailer with 145 gal (548L) fuel tank. ENGINE CUMMINS QSB7-G9 CUMMINS QSB7-G9 HP APPROX.NET (KW) WEIGHT LBS (KG) 282 5,490 (210) (2,490) 282 5,490 (210) (2,490) 12 GENERATORS MOBILE GENERATORS AIR COMPRESSORS MQ POWER NATURAL GAS Features · Ideal for oil and gas fields · Basler DGC2020 microprocessor · Q uiet operation both models benefit from a sound attenuated, weather resistant housing reduced noise to 69 db @ 23' (Full Load) · E PA Emission certified · C ontainment for all engine fluids Technical specifications MODEL STANDBY OUTPUT KW (KVA) NGA 88 100 (110) NGA 132 150 (165) PRIME OUTPUT KW (KVA) 80 (100) 120 (150) AMPS 1-PHASE 120V 222.2A (4-WIRE) 333.3A (4-WIRE) AMPS 1-PHASE 240V 111.1A (4-WIRE) 166.7A (4-WIRE) AMPS 3-PHASE 240V 240A 361A AMPS 3-PHASE 480V 120A 180A WET WEIGHT LBS (KG) 4,752 (2,155) 7,341 (3,330) TRAILER TRLR100 TRLR150 MQ POWER AIR COMPRESSOR Features · M odels available in 95 & 185 CFM · Q uiet operation - sound attenuated, weather resistant housing reduced noise to as low as 69 db @ 23' (Full Load) · E asy access to engine and air compressor through large lockable gull wing side doors · E asy maintenance with external drains Technical specifications MODEL CFM MAX ENGINE HP (KW) FUEL LxWxH PRESSURE CAPACITY (IN) GAL (L) WET WEIGHT LBS (KG) DIS100SSK4F 95 120 KUBOTA 23.2 D1005-E4B (17.3) 10.6 112x58.1 1,631 (40) x55.1 (740) DIS 185SSI4F 185 105 ISUZU 48.3 4LE2T (36) 22 128.5x65.6 2,337 (83) x60.1 (1,060) GENERATORS multiquip.com 13 WELDERS MQ POWER ENGINE POWERED WELDERS Features · The industry's most versatile line of welder / generators · Simultaneous use of DC Welding and AC power output on selected models Optional trailer · CC/CV welding output on 225 Amp and larger models · Dual welding capability on DLW330X2 and DLW400ESA4 for maximum productivity · Smart stick functions on DLW330X2 and DLW400ESA4. Automatically starts/stops engine for optimal fuel conservation. · Selected models feature E-mode to reduce fuel consumption and noise levels · Optional remote available on selected models (225-500) · AC receptacles GFCI protected Technical specifications MODEL DC DC CURRENT VOLTAGE DUTY CYCLE CURRENT POWER ENGINE WEIGHT LxWxH RANGE OUTPUT; LBS (KG) IN (CM) AMPS GASOLINE GAW135H** 135A 25.2V 40%@135A 100%@80A 40-135A 1.5KW; HONDA 12.5 GX200 114 (52) 22x19x21 (55x48x53) GAW180HEA** 180A 26.8V 50%@180A 100%@110A 50-180A 3KW; HONDA 236 25 GX340 (107) 28x26x22 (70x65x56) DIESEL TRAILER/ WHEEL KIT UWKB UWKB SDW225SSA1* 225A 15-28 28CC 100%@200A 50-225A 6KW; KUBOTA 675 45x26x32 TRLRMP(XF), 50/25 Z482 (306) (114x66x81) WKT225A DLW300ESA1* DLW330X2* DLW400ESA4* DAW500SA4* 300A 31CC 100%@280A 30-300A 9.6KW; KUBOTA 80/40 D722 849 (385) 51x27x33 (130x69x84) TRLRMP(XF) 340A Single 31 100%@280A 200A 2x26.6CC 2x165 30-340A 30-200A 9.6KW; KUBOTA 80/40 D902 893 (405) 51x27x33 (130x69x84) TRLRMP(XF) Duel 400A Single 200A Duel 34 100%@350A 30-400A 12KW; KUBOTA 2x27CC 2x175 2x30-200A 100/50 D902 1,028 (466) 61x29x35 (154x72x89) TRLRMP(XF) 500A 16-40CV 38CC 100%@350A 50-500A 2.4KW; KUBOTA 20 D1803 1,175 (533) 53x32x45 (133x80x113) TRLRMP(XF) * TIER 4f ** Not currently available for sale or use in Canada. Optional battery available. 14 WELDERS TRAILERS MQ POWER HEAVY-DUTY TRAILERS Features · Heavy-duty welded steel frame construction · Powder coat paint process including frame, channel, actuator and fenders (excluding TRLR600XFBP3E) · D.O.T. approved tail lamps, stop lamps, turn signal lamps and side marker lamps · Surge hydraulic or electric-actuated drum brakes (all axles) on select models Technical specifications MODEL TRLRMP TRLRMPXF TRLR25US2 TRLR45 TRLR70US TRLR75XF2 TRLR85XF2 TRLR125XF2 TRLR125US TRLR180EV TRLR220EV TRLR300EV TRLR 400XF3DAE TRLR 600XFBP3E GROSS VEHICLE WEIGHT RATING LBS GROSS AXLE WEIGHT RATING LBS TIRE TIRE LOAD SIZE RATING LBS LXWXH (IN) FUEL TANK WEIGHT CAPACITY DRY GAL (WET) LBS 2,000 2.000 EA ST175/80D 13 LR-C 1,360 EA 98.6x55.5x22 383 (-) 2,000 2.000 EA ST175/80D 13 LR-C 1,360 EA 98.6x55.5x22 28 513 (713) 2,720 3.500 EA ST175/80D 13 LR-C 1,360 EA 105.7x56x21 406 (-) 7,000 3,500 EA ST205/75D 14 LR-C 1,760 EA 148x65.25x27 1056 (-) 7,000 3,500 EA ST205/75D 15 LR-C 1,820 EA 164.4x72.5x23.5 980 (-) 7,000 3,500 EA ST205/75D 15 LR-C 1,820 EA 142.5x69.5x28.5 100 1,366 (2077) 7,000 3,500 EA ST225/75D 15 LR-D 2,540 EA 180.86 x 72.25 x 29.45 180 1,740 [2,990] 9,000 4,500 EA ST225/75D 15 LR-D 2,540 EA 180.86 x 72.25 x 29.45 180 1,998 [3,278] 10,000 5,000 EA ST225/75D 15 LR-D 2,540 EA 181x79.5x24.7 1,719 (-) 14,000 7,000 EA ST235/80R 16 LR-G 3,520 EA 212.9x89x26.58 2,404 [WET] (-) 16,000 8,000 EA ST235/85R 16 LR-G 4,400 EA 212.9x89x26.58 2,404 [WET] (-) 10,000 10,000 EA ST235/75R 17.5 LR-J 6,005 EA 223.15x99.5x32.95 3,076 [WET] (-) 21,000 7,000 EA ST235/ 80R16 LR-E 3,500 EA 264x94x27.4 350 4,280 (1,943) 34,000 12,000 EA ST235/75R 17.5 LR-H 6,005 EA 324x102x35.4 600 25,638 [WET] (29,904) TRAILERS multiquip.com 15 GLOBUG LIGHTING GLOBUG BALLOON LIGHTS Features · Operates on 120V AC Power · 360° illumination · Glare-free lighting · Internal electric ballast · Weather resistant balloon material · Metal Halide and LED lamp options · Easy set-up and transportation · Industrially designed stand and cart options Optional generator Technical specifications MODEL TYPE LAMP GBC GBW GBS GBP GB12BW GB12BS GB12BP GB3LED GB3LEDB GB3LEDC GB8LED GB8LEDB GBC8LED GB2000 GB4000 CART* WITH PENTAPOD STAND EQUIP. MOUNT LAMP ONLY** WITH TRIPOD STAND EQUIP. MOUNT LAMP ONLY** LED LAMP W/TRIPOD LED LAMP ONLY** CART* LED LAMP W/ PENTAPOD LED LAMP ONLY** CART* LIGHT TOWERS*** LIGHT TOWERS*** 1KW METAL HALIDE 1KW METAL HALIDE 1KW METAL HALIDE 1KW METAL HALIDE 400W METAL HALIDE 400W METAL HALIDE 400W METAL HALIDE 300W LED 300W LED 300W LED 800W LED 800W LED 800W LED 2KW METAL HALIDE 4KW METAL HALIDE * Generator not included with cart models. **LAMP ASM. ONLY - indicates a complete balloon lamp assembly (less mast, stand or cart). *** Designed to attach to selected trailer mounted mobile light towers. WEIGHT LBS (KG) 126 (57) 56 (26) 34 (16) 22 (10) 30 (14) 30 (14) 13 (6) 27 (59) 18 (40) 82 (37) 48 (22) 25 (11) 126 (57) 31 (68) 40 (88) GLOBUG 4-SPOT LIGHT TOWERS Features · Ultimate compact cart design · Metal Halide (MH) and LED lamp models · 3-Stage mast (MH) and 4-stage mast LED · Operates from 120V house or generator power · MH mast raises to 13.7' - LED mast to 17.1' GB43SC shown with optional generator Technical specifications MODEL VOLTAGE AMPS GB43SC 120V 18.6 GB43LED 120V 11 BULB WATTAGE 4 x 400W 4 x 300W LUMENS 142,000 152,000 BULB TYPE METAL HALIDE LED WEIGHT LBS (KG) 364 (165) 316 (165) 16 LIGHTING SOLUTIONS GLOBUG LIGHTING GLOBUG POWERED CARTS Features · 1.6KW Inverter Generator · P owerful 4 cycle, 3.5 HP (2.6kW) gasoline engine EPA/CARB Certified · 3 Gallon fuel tank over 18 HRS run time · ECO mode for fuel conservation & noise abatement - 63 dB(A) · 120V 13.3A external DUPLEX receptacle · Lamps made of rugged aluminum/poly-carbonate materials · R ugged, anodized steel cart with mechanical brake, and adjustable handle · (3) piece anodized aluminum air-assist mast · Overall compact design: 32" X 22" footprint GBX4S GBX8B Technical specifications MODEL GBX4S GBX8B VOLTAGE AMPS 120V 13.3 120V 13.3 BULB WATTAGE 2 x 200 800 LUMENS 56,000 110,000 BULB TYPE LED LED WEIGHT LBS (KG) 363 (165) 383 (174) LIGHTING SOLUTIONS multiquip.com 17 GLOBUG LIGHTING GLOBUG LIGHT TOWERS GBX12SK Features · Trusted Kubota liquid-cooled diesel engine EPA/CARB compliant · High efficiency LED lamps produce bright, clear 168,000 lumen projection lighting · LED longevity and safety lamps provide 40,000 hours of operational life and allow for immediate strike/re-strike lamp capability · Aerospace mast design anodized aluminum 5-section vertical telescopic mast assembly provides superior strength and corrosion resistance · Industrial trailer assembly rugged, compact design meets all DOT/NHSTA trailer and cabinet requirements GBX24BK Features · Trusted Kubota liquid-cooled diesel engine EPA/CARB compliant · High efficiency LED lamps produce bright, clear 399,000 lumen diffused lighting · LED longevity and safety lamps provide 40,000 hours of operational life and allow for immediate strike/re-strilke lamp capability · Aerospace mast design anodized aluminum 5-section vertical telescopic mast assembly provides superior strength and corrosion resistance · Industrial trailer assembly rugged, compact design meets all DOT/NHSTA trailer and cabinet requirements Technical specifications MODEL ENGINE LAMP TYPE LAMP STYLE GBX12SK DIESEL LED 4-SPOT GBX24BK DIESEL LED BALLOON LUMENS 168,000 399,000 LAMP LIFE 40,000 HRS 40,000 HRS WEIGHT LBS (KG) 1,288 (515) 1,278 (511) 18 LIGHTING SOLUTIONS ELECTRIC SUBMERSIBLE PUMPS SUBMERSIBLE CLEAN WATER PUMPS Features · 1 .25" to 6" diameter discharge · S elected models UL and CUL listed · C ompact and streamlined design with thermal overload protection · S ingle-phase and three-phase motors available · D ouble oil-filled seal provides positive lubrication (selected models) Technical specifications MODEL DISCHARGE GPM IN (MM) (LPM) TOTAL HEAD FT (M) VOLTAGE PHASE HP DIAMETER WEIGHT (KW)1 IN (MM) LBS (KG) YELLSUB 1.25 (38) 33 (125) 15 (4.6) 115 1Ø 0.25 (0.185) 5.3 (136) 6(2.72) SS233 2 (50) 60 (227) 20 (6.1) 115 1Ø 0.5 (0.37) 8.1 (206) 15.5(7) ST2038P 2 (50) 60 (227) 38 (11.5) 115 1Ø 1.0 (0.75) 7.7 (196) 31(14) ST2037 2 (50) 73 (276) 37 (11.3) 115 1Ø 1.0 (0.75) 7.4 (188) 31(14) ST2037F # 2 (50) 73 (276) 37 (11.3) 115 1Ø 1.0 (0.75) 7.4 (188) 31(14) ST2047 2 (50) 87 (329) 47 (14.3) 115 1Ø 1.0 (0.74) 7.4 (188) 33(15) ST3020BCUL 3 (75) 170 (644) 72 (22) 230 1Ø 2.0 (1.5) 6.7 (170) 67(30) ST3050D* 3 (75) 264 (999) 86 (26) 230/460 3Ø 5.0 (3.7) 10.2 (259) 120(54) ST41230* 4 (101) 423 (1,601) 138 (42) 230 3Ø 10 (7.4) 12.5 (318) 205(93) ST41460* 4 (101) 423 (1,601) 138 (42) 460 3Ø 10 (7.4) 12.5 (318) 205(93) ST61230* 6 (152) 674 (2,423) 105 (32) 230 3Ø 15 (11.1) 14 (356) 301(136) ST61460* 6 (152) 674 (2,423) 105 (32) 460 3Ø 15 (11.1) 14 (356) 301(136) * T hree-phase--specify voltage when ordering Models ST3050D, ST41230, ST41460, ST61230, ST1460 require a Control Box when ordering. Not currently available for sale or use in Canada. 1 See page 50 for details. SUBMERSIBLE TRASH PUMPS Features · C ompact design with thermal-overload protection · H andles solids up to 1" in diameter · P X400 designed with plastic/stainless steel housing Technical specifications MODEL PX400 DISCHARGE IN (MM) 2 (51) GPM (LPM) 72 (273) ST2040T 2 (51) 79 (299) ST2040TF # 2 (51) 79 (299) ST2010TCUL 2 (51) 95 (360) # with integrated Float Switch. MAX HEAD VOLTAGE HP DIAMETER WEIGHT FT (M) PHASE (KW)1 IN (MM) LBS (KG) 34 (10.3) 115 1Ø 0.5 (0.37) 10 (254) 25 (11) 40 (12.2) 115 1Ø 1.0 (0.75) 10.3 (267) 34 (15.4) 40 (12.2) 115 1Ø 1.0 (0.75) 10.3 (267) 34 (15.4) 45 (13.7) 115 1Ø 1.0 (0.75) 10.3 (267) 77 (35) 1 See page 50 for details. DEWATERING EQUIPMENT multiquip.com 19 ENGINE CENTRIFUGAL PUMPS CENTRIFUGAL PUMPS Features · Dewatering pumps for a variety of clear water applications · Industrial die cast aluminum pump-end design · Compact, portable · Dependable Honda gasoline engines · Adjustable discharge port · Sturdy wrap-around frame Technical specifications MODEL QP2H QP303H QP402H SUCTION X DISCHARGE IN (MM) 2x2 (51x51) 3x3 (76x76) 4x4 (101x101) GPM (LPM) 158 (600) 245 (931) 425 (1,615) MAX HEAD ENGINE FT(M) 115 (35) 98 (30) 100 (30) HONDA HONDA HONDA HP (KW)1 WEIGHT LBS (KG) 3.5 (2.6) 53 (24) 4.8 (3.6) 77 (35) 7.9 (5.9) 145 (65) 1 See page 50 for details. HIGH-PRESSURE CENTRIFUGAL PUMPS Features · Honda-powered with low-oil alert · High head producing · High pressure producing · Unique 3 discharge port manifold · Excellent for fire emergencies, portable irrigation and equipment cleaning Technical specifications MODEL QP15HP QP205SH QPT205SLT QPT305SLT QPT405SLT SUCTION X DISCHARGE IN (MM) GPM MAX HEAD MAX (LPM) FT (M) PSI 2x2 (51x51) 56 (212) 197 (60) 86 2x1.5/1/1 (51x38/25/25) 106 (401) 230 (70) 100 2x1.5/1/1 (51x38/25/25) 126 (479) 312 (95) 135 3x1.5/1/1 (76x38/25/25) 145 (550) 328 (100) 142 4x3/3/4 (101/76/76/101) 210 (795) 377 (115) 163 ENGINE HP WEIGHT (KW)1 LBS (KG) HONDA 2.1 (2.8) 22 (1Ø) HONDA 4.8 (6.4) 64 (29) HONDA 7.9 (5.9) 99 (45) HONDA 10.7 (8.0) 110 (50) HONDA 10.7 (8.0) 305 (137) 1 See page 50 for details. 20 DEWATERING EQUIPMENT ENGINE TRASH PUMPS TRASH PUMPS Features · R ugged die-cast pump casings · 2 ", 3" & 4" suction/discharge · D uctile iron impellers · S ilicon/carbide mechanical seals · E asy access clean-out covers · 1 " protective roll frame · G asoline & diesel engine models · H andles solids up to 2" diameter · O ptional wheel kits available Technical specifications MODEL SUCTION & DISCHARGE GPM MAX MAX SOLIDS ENGINE HP WEIGHT IN (MM) (LPM) HEAD FT (M) IN (MM) (KW)1 LBS (KG) GASOLINE ENGINES QP2TH 2x2 (51x51) 211 (800) 98 (30) 1.0 (25.4) HONDA 4.8 (3.6) 96 (43.5) QP3TH 3x3 (76x76) 396 (1,500) 95 (29) 1.5 (38.1) HONDA 7.9 (5.9) 142 (64) QP4TH 4x4 (100x100) 555 (2,100) 92 (28) 2.0 (50.8) HONDA 10.7 (8.0) 216 (98) DIESEL ENGINES - PIPE FRAME MODELS QP2TK 2x2 (51x51) 172 (650) 85 (26) 1.0 (25) KUBOTA 6.0 (4.5) 157 (71) QP3TK QP4TK 3x3 (76x76) 4x4 (102x102) 325 (1,229) 85 (26) 475 (1,798) 85 (26) 1.5 (38) 2.0 (51) KUBOTA 6.0 (4.5) 176 (80) KUBOTA 9.5 (7.0) 286 (130) MODEL FUEL CAPACITY GPM (LPM) GPM MAX MAX SOLIDS ENGINE HP WEIGHT (LPM) HEAD FT (M) IN (MM) (KW)1 LBS (KG) DIESEL ENGINES - TRAILER MOUNTED MODELS QP4TKT10 1.45 (5.5) 475 (1798) 85 (26) 2.0 (51) KUBOTA 9.5 (7.0) 615 (277) QP4TKT16 16.0 (60.6) 475 (1798) 85 (26) 2.0 (51) KUBOTA 9.5 (7.0) 665 (302) QP4TKT28 28.0 (106) 475 (1798) 85 (26) 2.0 (51) KUBOTA 9.5 (7.0) 735 (333) 1 See page 50 for details. DEWATERING EQUIPMENT multiquip.com 21 ENGINE TRASH PUMPS TRASH PUMP - QP3Ti Features · AUTO unattended operations · Float Switch Operations · Electric Start - AUTO Choke · Controlled Discharge Rates · Wheel Kit included · Float Switches included Technical specifications MODEL SUCTION & DISCHARGE GPM MAX MAX SOLIDS ENGINE HP WEIGHT IN (MM) (LPM) HEAD FT (M) IN (MM) (KW)1 LBS (KG) QP3Ti 3x3 (76x76) 396 (1,500) 95 (29) 1.5 (38.1) HONDA 7.9 (5.9) 142 (64) 1 See page 50 for details. TRASH PUMP - QP3TS Features · Unique sound suppression design · 63 db(A) · Convenient electric start engine · Wheel Kit included · 4.5 hour run time Technical specifications MODEL QP3TS SUCTION & DISCHARGE GPM MAX MAX SOLIDS ENGINE IN (MM) (LPM) HEAD FT (M) IN (MM) 3x3 (76x76) 396 (1499) 95 (29) 1.5 (38) HONDA HP WEIGHT (KW)1 LBS (KG) 8.5 (6.3) 287 (130) 1 See page 50 for details. TRASH PUMP - QP3THX Features · Sound suppression manifold · 71 db(A) · Extended Fuel Tank · 7.2 hour run time · Trusted MQ 3" Trash pump-end Technical specifications MODEL SUCTION & DISCHARGE GPM MAX MAX SOLIDS ENGINE HP WEIGHT IN (MM) (LPM) HEAD FT (M) IN (MM) (KW)1 LBS (KG) QP3THX 3x3 (76x76) 396 (1,500) 95 (29) 1.5 (38.1) HONDA 7.9 (5.9) 142 (64) 1 See page 50 for details. 22 DEWATERING EQUIPMENT ENGINE TRASH & DIAPHRAGM PUMPS TRASH PUMPS 6" Skid & Trailer Mount Features · Powerful wet priming system · 6" suction/discharge · Passes 3" solids · Ductile iron impellers · Multi-position discharge · LED control boxes · Strong No. 30 grey iron pump housing · Silicon/carbide mechanical seal · Multiple DOT approved trailer packages · Battery included with all 6" pumps Technical specifications MODEL FUEL CAPACITY GPM MAX MAX SOLIDS ENGINE GPM (LPM) (LPM) HEAD FT (M) IN (MM) DIESEL ENGINES - MQ62 SERIES - SKID MOUNTED MODEL HP WEIGHT (KW)1 LBS (KG) MQ62TKS 16 (61) 1,190 (4505) 111 (34) 3.0 (7.6) KOHLER 24.3 (18) 1,560 (702) DIESEL ENGINES - MQ62 SERIES - TRAILER MOUNTED MODEL MQ62TKT 28 (106) 1,190 (4505) 111 (34) 3.0 (7.6) KOHLER 24.3 (18) 1,700 (771) DIESEL ENGINES - MQ600 SERIES - SKID MOUNTED MODEL MQ600H 40 (151) 1,600 (6057) 150 (46) 3.0 (7.6) HATZ 68.4 (50) 2,200 (998) DIESEL ENGINES - MQ600 SERIES - TRAILER MOUNTED MODEL MQ600HTB 40 (151) 1,600 (6057) 150 (46) 3.0 (7.6) HATZ 68.4 (50) 2,850 (1293) MQ600HTP 40 (151) 1,600 (6057) 150 (46) 3.0 (7.6) HATZ 68.4 (50) 2,850 (1293) 1 See page 50 for details. DIAPHRAGM PUMPS Features · Ideal for slow seepage, sludge and heavy debris laden fluid applications · Q uick, easy priming · Wheel Kit included Technical specifications MODEL MQD2HA MQD3HA SUCTION x DISCHARGE IN (MM) 2x2 (51x51) 3x3 (76x76) GPM (LPM) 50 (189) 90 (342) ENGINE HONDA HONDA HP (KW)1 3.5 (2.6) WEIGHT LBS (KG) 125 (57) 3.5 (2.6) 175 (79) 1 See page 50 for details. DEWATERING EQUIPMENT multiquip.com 23 PUMP ACCESSORIES PUMP ACCESSORIES Features · Full line of suction hoses · Full line of discharge hoses · Float switches · Control boxes for submersible pumps · Wheel kits for pipe frame pumps · DOT approved industrial trailers for trash pumps PUMP HOSES Multiquip offers a complete line of Suction and Discharge Hoses, in sizes from 1-1/2" to 8" with standard thread or quick-disconnect couplings. FLOAT SWITCHES FOR SUB PUMPS Multiquip offers industrial Float Switches, to support dewatering operations. Single and Dual Float Switches available. CONTROL BOXES FOR SUB PUMPS Multiquip offers rugged Control Boxes, for sub pump operations and electrical protection. Pumps requiring Control Boxes: ST3050D, ST41230, ST41460, ST61230 and ST61460. TRASH PUMP WHEEL KITS and TRAILERS Optional wheel kits are available for almost every Multiquip trash pump. Easily installed, they simplify mobility on the job site. Industrial towable trailers with fuel cells are available for QP4TZ, MQ62TDD and MQ600TD80 models. 24 DEWATERING EQUIPMENT WATER TRAILER WATER TRAILERS Features · High strength 525 gallon polyethylene water tank · Industrial DOT Certified dual axle trailers · Rear mounted accessory hose bin · Suction/Discharge hose sections provided · Trusted Multiquip centrifugal water pumps · Simple 2-control handle manifold system · Left/right discharge and suction ports · Cam and Groove lock discharge and suction couplers · Rear spray bar system · R ugged, convenient steel hydrant fill tube WT5C shown with WT5HR Hose Reel Accessory Technical specifications MODEL CAPACITY GAL PUMP GPM MAX HEAD FT WT5C 525 158 115 WTE5C 525 158 115 WT5HP 525 106 230 WTE5HP 525 106 230 ACCESSORIES - HOSES MODEL HOSE SIZE TYPE IN HS220 SUCTION 2 HSQ220 SUCTION 2 HSQ225 SUCTION 2 HD225 DISCHARGE 2 HDQ225 HDFNST WT5HR DISCHARGE 2 FIRE HYDR. DISCHARGE 1.5 HOSE REEL ASSEMBLY 1 ENGINE HONDA GX-120 HONDA GX-120 HONDA GX160 HONDA GX160 TRAILER DUAL AXLE DOT APPROVED DOT APPROVED ELECTRIC BRAKES DUAL AXLE DOT APPROVED DOT APPROVED ELECTRIC BRAKES WEIGHT (DRY) LBS 1,428 1,428 1,538 1,538 LENGTH FT 20 20 25 50 20 25 50 COUPLER NPT THREAD QUICK DISCONNECT QUICK DISCONNECT NPT THREAD QUICK DISCONNECT QUICK DISCONNECT NPT THREAD PSI CAPACITY 75 75 75 75 75 200 200 WATER TRAILER multiquip.com 25 CONCRETE/MASONRY PUMPS MAYCO MECHANICAL BALL VALVE PUMPS Features · Powerful, 45 HP Zenith Gasoline · One-piece forged, heat-treated crankshaft · 3-speed volume control allows the operator to vary the flow · Fully-enclosed "splash" lubrication box provides clean, positive piston lubrication · Ball and valve seat Technical specifications MODEL MAX AGGREGATE IN (MM) PUMPING RATE YDS3/HR (M3/HR) C30HDG A 1/2 (10-12) 25 (19) ENGINE HP (KW)1 WEIGHT LBS (KG) ZENITH GASOLINE 45 (33.5) 2,910 (1,320) 1 See page 50 for details. MAYCO HYDRAULIC SWING TUBE PUMPS Features · Versatileshotcrete, masonry block fill, slabs, footings · Designed to pump larger aggregate up to 1-1/2" · Variable volume output from 0 to 45 cu. yds. per hour · Up to 1,100 psi piston face pressure · Digital diagnostic control panel · Available with optional wireless remote control Technical specifications MODEL LS300G MAX AGGREGATE IN (MM) 1.5 (38) PUMPING RATE YDS3/HR (M3/HR) 30 (22.9) LS450 1.5 (38) 45 (34) ENGINE ZENITH GASOLINE HATZ TURBO DIESEL HP (KW)1 WEIGHT WITHOUT FUEL LBS (KG) 71.2 (53.16) 74.5 (55.5) 3,855 (1,748) 5,155 (2,328) 1 See page 50 for details. 26 CONCRETE/MASONRY CONCRETE MIXERS TOWABLE CONCRETE MIXERS Features · S teel drum or polyethylene versions available · V ariety of power sources · L eaf springs standard on 6-, 9- and 12-cu. ft. mixers · O versized dump wheel easier to discharge material · 1 3" tires for safe towing · S teel mixers available with 4-, 6- or 9-cu. ft. drums · P olyethylene models available with 6-, 9- or 12-cu. ft. drums; simplify cleanup while resisting rust and dents Polyethylene Drum Technical specifications STEEL MODEL MC44SE MC44SH MC64SE MC64SH5 MC64SH8 MC94SE MC94SH8 POLY MODEL MC64PE MC64PH5 MC64PH8 MC94PE MC94PH8 MC12PH CAPACITY CU FT (L) 4 (113) 4 (113) 6 (169) 6 (169) 6 (169) 9 (254) 9 (254) 12 (339) Steel Drum DRUM OPENING IN (MM) 17.5 (445) 17.5 (445) 19 (483) 19 (483) 19 (483) 21 (533) 21 (533) 20 (508) ENGINE 115V HP (KW)1 0.5 (.37) HONDA 3.5 (2.6) 115/230V 1.5 (1.1) HONDA 4.8 (3.6) HONDA 7.9 (5.8) 115/230V 1.5 (1.1) HONDA HONDA 7.9 (5.8) 10.7 (7.9) 1 See page 50 for details. POLYETHYLENE DRUMS Polyethylene drum mixers clean out easily and quickly! These photos show a batch of concrete that was left to dry for more than 24 hours. With a few taps of a mallet, virtually all the dried material falls out of the mixer. It's truly that simple to clean! CONCRETE/MASONRY multiquip.com 27 CONCRETE MIXERS MUDTUBS PORTABLE CONCRETE MIXERS Features · Mix-N-Go is perfect for homeowners, small jobs and multiple work sites Technical specifications MODEL MC3PEA DRUM BATCH CAPACITY DRUM OPENING CONSTRUCTION CU FT (L) IN (MM) ENGINE POLY 3 (85) 15.5 (394) 3/4 HP, 115V, 1Ø ELECTRIC MUDTUBS Features · Capacity 10-cu. ft. (.28 m3) · Highly durable polyethylene construction resistant to cold weather and UV · Our tough Easy CleanTM tubs can be cleaned in minutes with tap of rubber mallet · Resists dents, rust or cracks · Mud Tub features 4" x 4" rectangular steel feet · Mud Tub W features heavy-duty, high impact resistance 8 inch casters · One-year warranty · Approximate 1,000 lb. capacity Mobile Technical specifications MODEL TUB TYPE MUDTUB STATIONARY MUDTUBW MOBILE DIMENSIONS IN (CM) L 56.75 (1,141) W 28.25 (717.5) H 22.75 (577.8) L 56.75 (1141) W 28.25 (717.5) H 28.25 (717.5) WEIGHT LBS (KG) 54 (24.4) 81 (36.7) 28 CONCRETE/MASONRY PLASTER/MORTAR MIXERS WHITEMAN TOWABLE PLASTER/MORTAR MIXERS Features · H ydraulic-drive options on 12-cu. ft. models · A vailable in 6.3-, 7-, 9- and 12-cu. ft. models · H eavy-duty safety grate with built-in bag cutter · 1 3" tires for safe towing · Forklift pockets · S teel models offer durable drum up to 3/16" thick · P olyethylene drums simplify cleanup while resisting rust and dents Polyethylene Drum Technical specifications STEEL MODEL WM63H8 WM63H5 WM63E WM70SE WM70SH5 WM70SH8 WM90SE WM90SH8 WM120SHHD POLY MODEL WM70PE WM70PH5 WM70PH8 WM90PE WM90PH8 WM120PHD CAPACITY CU FT (L) 6.3 (178) 6.3 (178) 6.3 (178) 7 (198.2) 7 (198.2) 7 (198.2) 9 (254.9) 9 (254.9) 12 (339.8) Steel Drum ENGINE HONDA HONDA 115/230V,1Ø 115/230V,1Ø HONDA HONDA 230V,1Ø HONDA HONDA HP (KW)1 7.9 (5.8) 4.8 (3.6) 1.5 (1.1) 1.5 (1.1) 4.8 (3.6) 7.9 (5.8) 3.0 (2.2) 7.9 (5.8) 11.7 (8.7) DRIVE V-BELT/GEAR V-BELT/GEAR V-BELT/GEAR V-BELT/GEAR V-BELT/GEAR V-BELT/GEAR V-BELT/GEAR V-BELT/GEAR HYDRAULIC 1 See page 50 for details. PORTABLE NON-TOWABLE MORTAR MIXERS Technical specifications STEEL MODEL CAPACITY CU FT (L) WM45H 4.5 (113) WM45E 4.5 (113) ENGINE HONDA 115/230V,1Ø HP (KW)1 DRIVE 4.8 (3.6) V-BELT/GEAR 1.0 (0.7) V-BELT/GEAR 1 See page 50 for details. CONCRETE/MASONRY multiquip.com 29 PLASTER/MORTAR MIXERS ESSICK TOWABLE PLASTER/MORTAR MIXERS Features · Full range of mixers designed for professional masonry contractors · Towable mixers with 7-, 9- and 12-cu. ft. capacities · Paddle shaft seals require no greasing · Smooth towing whether on the job or on the highway Steel Drum Technical specifications STEEL MODEL EM70SE EM70SH5 EM70SH8 EM90SE EM90SH8 EM12M51 EM12ME53 EM12M EM120HYD CAPACITY CU FT (L) 7 (198.2) 7 (198.2) 7 (198.2) 9 (254.9) 9 (254.9) 12 (339.8) 12 (339.8) 12 (339.8) 12 (339.8) ENGINE 115/230V HONDA HONDA 230V, 1Ø HONDA 230V, 1Ø 230/460V, 3Ø HONDA HONDA HP (KW)1 1.5 (1.1) DRIVE V-BELT/GEAR 4.8 (3.6) V-BELT/GEAR 7.9 (5.9) V-BELT/GEAR 3.0 (2.2) V-BELT/GEAR 7.9 (5.9) V-BELT/GEAR 5.0 (3.7) MECHANICAL 5.0 (3.7) MECHANICAL 11.7 (8.7) MECHANICAL 11.7 (8.7) HYDRAULIC 1 See page 50 for details. ESSICK PRO MIXERS Features · PRO12 & PRO20 models offer stationary design for silo applications · Easy loading operator loads at waist height · Hydraulic drive handles tough mix designs including 1-inch aggregate · Powerful engine equipped recoil and electric start · Forklift pockets standard on all models · Battery included Technical specifications STATIONARY MODELS MODEL CAPACITY CU FT PRO12 12 PRO12E51 12 PRO12E53 12 PRO12E53-460V 12 PRO20 20 ENGINE HONDA GX390 ELECTRIC ELECTRIC ELECTRIC VANGUARD HP (KW)1 11.7 (8.7) 5 HP 1Ø 230V 5 HP 3Ø 230V 5 HP 3Ø 460V 18.0 (13.4) DRIVE HYDRAULIC HYDRAULIC HYDRAULIC HYDRAULIC HYDRAULIC 1 See page 50 for details. 30 CONCRETE/MASONRY REBAR BENDERS & CUTTERS REBAR BENDERS Features · C ompact design for use on the jobsite or in the shop · C ontrol knob selects precise bending angle · S tandard with foot control switch · A full variety of rollers and collars are included to accommodate all rebar sizes up to 1" diameter Technical specifications MODEL MB25A* BENDING CAPACITY IN (MM) 1.0 (25.4) BENDING SPEED SECONDS 5 SECONDS FOR 1800 * Not currently available for sale or use in Canada. BENDING RANGE 0-1800 ELECTRIC MOTOR OPER. WEIGHT LBS (KG) 115V, 60HZ 227 (103) REBAR CUTTERS Features · H BC features 1" maximum capacity; powered by 115V electric motor · C ompact and lightweight for easy portability · R eplaceable cutting blocks with multiple cutting edges · B uilt-in hydraulic pump with magnetic particle filtering Technical specifications MODEL 115V MODELS HBC19B HBC25B CUTTING DIAMETER IN (MM) 3/4 (19) 1 (25) CUTTING SPEED RATED POWER ELECTRIC SECONDS AMPS MOTOR 2.5 9 115V, 60HZ,1Ø 3.5 12 115V, 60HZ,1Ø WEIGHT LBS (KG) 28 (12.8) 48 (22) CONCRETE/MASONRY multiquip.com 31 POWER BUGGIES WHITEMAN POWER BUGGIES Features · Heavy-duty frame with 6" dump height · 8%-10% greater dumping reach 5% greater dumping angle than competitors · Easy CleanTM Poly Tub · Available with optional all-wheel drive Technical specifications MODEL WIDTH IN (MM) WBH16F* 44 (1,171.6) WBH16EF* 44 (1,171.6) WB- 44 H16EAWDF* (1,171.6) WBH21EF* 44 (1,171.6) WBH21EFP 44 (1,171.6) LENGTH IN (MM) 103 (2,641.6) 103 (2,641.6) 103 (2,641.6) 103 (2,641.6) 103 (2,641.6) MAX CAPACITY LOAD CU. FT LBS (KG) (CU.M) 2,500 16 (1,134) (3.5) 2,500 16 (1,134) (3.5) 2,500 16 (1,134) (3.5) 3,200 21 (1,451) (0.59) 3,200 21 (1,451) (0.59) STARTING SYSTEM RECOIL RECOIL & ELECTRIC RECOIL & ELECTRIC RECOIL & ELECTRIC RECOIL & ELECTRIC FUEL HP CAPACITY (KW)1 GAL (L) 4.8 (18.5) GAS 11.7 (8.7) 4.8 (18.5) GAS 11.7 (8.7) 4.8 (18.5) 18.0 GAS (10.4) 4.8 (18.5) 18.0 GAS (10.4) 7.5 18.0 (PROPANE) (10.4) SPEED MPH (KPH) 7.25 (11.66) 7.25 (11.66) 7.25 (11.66) 7.25 (11.66) 7.25 (11.66) * Foam-filled tires. 1 See page 50 for details. Model WTB16PD Also available straight dump Technical specifications MODEL WTB16 WTB 16PD WIDTH LENGTH MAX CAPACITY STARTING FUEL HP IN IN (MM) LOAD CU. FT SYSTEM CAPACITY (KW)1 (MM) LBS (CU.M) GAL (L) (KG) 35.5 (90.2) 102 2,500 (2,590) (1,134) 16 (0.453) ELECTRIC 5.0 (18.9) 22.0 (16.4) 35.5 (90.2) 110.2 2,500 (2,800) (1,134) 16 (0.453) ELECTRIC 5.0 (18.9) 22.0 (16.4) SPEED DISCHARGE MPH POSITION (KPH) 4.7 STRAIGHT (7.6) DUMP 4.7 PIVOT (7.6) DUMP 1 See page 50 for details. 32 CONCRETE/MASONRY POWER BUGGIES TUFFTRUK WALK BEHIND POWER BUGGY Features · Z ero Emission battery drive · L ong-lasting charge solid 8 hours or typically two or three days under normal conditions · Q uite operation produces very low noise · T rue 4-wheel drive with flotation tires · E xcellent maneuverability with 40 degree articulation · A vailable with a variety of attachments · R ugged steel or poly tub Technical specifications MODEL WIDTH IN (MM) LENGTH IN (MM) MAX CAPACITY LOAD CU. FT LBS (KG) (CU.M) TB11E 34.5 (86.3) 68.5 (1739) 990 (449) 10.6 (0.300) TB11G 34.5 (86.3) 68.5 (1739) 990 (449) 10.6 (0.300) TB11PE 34.5 (86.3) 68.5 (1739) 990 (449) 10.6 (0.300) TB11PG 34.5 (86.3) 68.5 (1739) 990 (449) 10.6 (0.300) STARTING SYSTEM BATTERY POWERED HONDA 5.5 HP BATTERY POWERED HONDA 5.5 HP SPEED TUB MPH (KPH) TYPE 0~4 (0~6.4) 0~4 (0~6.4) 0~4 (0~6.4) 0~4 (0~6.4) STEEL TUB STEEL TUB POLY TUB POLY TUB Optional Accessories MODEL TSP TTBH TT7 TFB33 TFB29 TTH TTE DESCRIPTION SNOW PLOW TOWING HITCH 7FT3 CLIP ON TUB 33.4" FLATBED 29" FLATBED DUMP HANDLE TUB EXTENSION KIT CONCRETE/MASONRY multiquip.com 33 CONCRETE VIBRATORS MIKASA UM VIBRATORS Features · Lightweight and powerful 120V motor · Ideal for footings and block walls · Vibration dampening handle design · Three shaft and four head sizes available Technical specifications COMPLETE ASSEMBLY (MOTOR, HEAD, SHAFT) MODEL AMPS HEAD DIAMETER IN (MM) OVERALL LENGTH FT (M) UM12325 3.8 0.9 (23) 9.6 (2.9) UM12810 3.8 1.1 (28) 4.7 (1.4) UM12815 3.8 1.1 (28) 6.3 (1.9) UM12825 3.8 1.1 (28) 9.6 (2.9) UM13225 3.8 1.25 (32) 9.6 (2.9) UM13810 3.8 1.5 (38) 4.7 (1.4) UM13815 3.8 1.5 (38) 6.3 (1.9) UM13825 3.8 1.5 (38) 9.6 (2.9) FREQUENCY SET WEIGHT VPM (HZ) LBS (KG) 12,000-15,500 (200-258) 12,000-15,500 (200-258) 12,000-15,500 (200-258) 12,000-15,500 (200-258) 12,000-15,500 (200-258) 12,000-15,500 (200-258) 12,000-15,500 (200-258) 12,000-15,500 (200-258) 14.3 (6.5) 11.4 (5.2) 13 (5.9) 16.06 (7.3) 16.5 (7.5) 12.54 (5.7) 14.11 (6.4) 17.16 (7.8) BACKPACK & FLEX-SHAFT VIBRATORS Features · Gasoline-powered backpack and stationary drive motor or electric handheld motors available · Flexible shafts from 2 ft. to 21 ft. long · UL compliance testing to USA and Canadian standards on all electric motors · Ideal for footings and block walls · Six heads from 7/8" to 2-5/8" available Technical specifications HAND-HELD ELECTRIC MOTORS MODEL VOLTAGE AMPS RPM WEIGHT LBS (KG) CV1A 120V 10 16,000 11 (5) CV2A 120V 15 18,000 13 (6) CV2B 240V 7.5 18,000 13 (6) CV3A 120V 20 19,250 14 (6) CV3B 240V 10 19,250 14 (6) GASOLINE DRIVE MODEL ENGINE HP (KW)1 MOTOR TYPE WEIGHT LBS (KG) BPX HONDA 2.1 (1.6) BACKPACK 31 (14) G55H HONDA 4.8 (3.6) STATIONARY/SWIVEL 74 (33) HEADS AND SHAFTS STEEL HEAD DIAMETERS IN (MM) FLEXIBLE SHAFT LENGTHS FT (M) 7/8 (22), 1-1/16 (27), 1-3/8 (35), 1-11/16 (43), 2-1/8 (54), 2-5/8 (67) 2 (.6), 7 (2.1), 10 (3), 12 (3.7), 14 (4.3), 21 (6.4) 1 See page 50 for details. 34 CONCRETE/MASONRY CONCRETE VIBRATORS HIGH-CYCLE GENERATORS (FOR FXA VIBRATORS) Features · Powers up to three high-cycle vibrators simultaneously · 5kVA, 230-volt, 180-cycle output · 3,600 watts continuous 60-cycle, single-phase power · Reliable Honda engine with recoil start, low-oil shutdown and idle control · Lifting bail for easy moving · All receptacles GFCI protected Technical specifications MODEL GDP5HA* MAX/CONT @180HZ 5KVA OUTPUT @180HZ 230V, 12.5A MAX/CONT @60HZ 4KW/3.6KW OUTPUT @60HZ 120/240V, 60HZ,30/15A ENGINE HONDA GX340 HP (KW)1 9.5 (7.1) WEIGHT LBS (KG) 236 (107) * Not currently available for sale or use in Canada. 1 See page 50 for details. MIKASA FXA HIGH-CYCLE CONCRETE VIBRATORS Features · Ideal for medium- to low-slump applications · Motor-in-head design minimizes VMP loss under load · Extended hose lengths available in 10' and 20' increments · Cable extentions available in 50' and 100' increments Technical specifications MODEL HEAD DIA IN(MM) HEAD LENGTH IN (MM) HOSE CORD LENGTH AMPS CENTRIFUGAL VPM WEIGHT LENGTH FT (M) FORCE LBS (KG) FT (M) LBS (KG) FXA50A4 2 (51) 16-1/2 (419) 13.1 (4) 33 (10) 2 714 (324) 10,800 36 (16) FXA50A6 2 (51) 16-1/2 (419) 20 (6.1) 33 (10) 2 714 (324) 10,800 55 (25) FXA60A4 2-3/8 (60) 19-1/4 (260) 13.1 (4) 33 (10) 4.5 1,600 (726) 10,800 42 (19) FXA60A6 2-3/8 (60) 19-1/4 (260) 20 (6.1) 33 (10) 4.5 1,600 (726) 10,800 65 (29) Hose Extension Kit for FXA High Cycle Concrete Vibrators MODEL FXAKIT10FT FXAKIT20FT FEET WEIGHT 10 20 LB 20 40 LB Extended High Cycle Lengths are available. Additional handling hose may be added in 10-feet and 20-feet increments to meet application requirements. Extensions are special order, contact Multiquip for terms and lead times. CONCRETE/MASONRY multiquip.com 35 SCREEDS WHITEMAN DUOSCREEDS Features · Blade quickly removed without tools; handle folds for storage · Powered by maintenance-free flexible shaft · Unique patented reversible blade design allows both form-to-form and wet screeding with a single blade Technical specifications SCREED MODEL ENGINE HP VPM (KW)1 DRIVE SYSTEM DSGPULW HONDA GX35 1.3 (1.0) 5,500 FLEXIBLE SHAFT MAINTENANCE FREE MODEL: DSBLW WEIGHT LBS (KG) 32 (14.5) BLADE WIDTHS FT (M) 6 (1.8) 8 (2.44) 10 (3.0) 12 (3.66) 14 (4.27) 16 (4.88) DUOSCREED BLADE 1 See page 50 for details. The handheld screed uses a unique reversible blade that is designed for form-to-form and wet screeding. FLOAT PANS & TROWEL BLADES Pans: Superflat or flat configurations, for use with ride-on trowels, and flat or domed for use with walk-behind trowels. Allows fast floating and easy movement from wet to dry areas. Excellent for applying shake-on toppings. Achieve higher FF numbers and increased production. Available in the following sizes: 24", 36", 46" and 60". Blades: Float, finish and combination float/ finish for walk-behind and ride-on trowels Interchangeable with most competitive models. Provides best possible results when used with Whiteman trowels. Unique Enduro Blade series features heavy-duty design, providing up to 50% longer life. Quickchange blades have bolt-less design for fast, easy blade replacement. RIDE-ON TROWELS 36 CONCRETE/MASONRY VIBRATORY SCREEDS WHITEMAN TRUSS SCREEDS Features · D urable triangular steel truss spans up to 65 ft. · G as engine-driven vibration, steel truss design · H eavy-duty steel construction · O ptional self-propelled winches minimize labor · Engine-Powered Technical specifications DESCRIPTION 2.5-FT.(0.76M) TRUSS SECTION 5.0-FT.(1.5M) TRUSS SECTION 7.5-FT.(2.28M) TRUSS SECTION SELF-PROPELLED WINCH - (LEFT)(RIGHT) END HANDLE SET 11 HP HONDA ENGINE KIT 5' SECTION W/ WSHEKIT11H MOUNTED UNIVERSAL JOINT KIT INVERT CROWN KIT REINFORCEMENT BRACKET ADJUSTABLE END BRACKET ADJUSTABLE END BRACKET WITH ROLLERS HAND WINCH SET *Includes standard mounted 2.5 ft. sections. MODEL MSHE25 MSHE50 MSHE75 WSHESPW(L)(R)* MSHEH MSHEKIT11H MSHE50KIT11H WSHEKITUJ WSHEIC WSHRBE WSKITAEB WSKITAEBR WSHW WEIGHT LBS (KG) 57 (26) 95 (43) 136 (62) 105 (48) 54 (27) 112 (51) 207 (94) 22 (10) 98 (45) 6 (2.7) 24 (11) 26 (12) 42 (19) SCREED KITS AND ACCESSORIES Universal Joint Kits Adjustable End Brackets Invert/Crown Kits Adjustable End Brackets with Rollers CONCRETE/MASONRY multiquip.com 37 WALK-BEHIND TROWELS WHITEMAN INSTACLUTCHTM Features · Advanced friction clutch stops the unit before a quarter of a turn if the operator releases the handle at full RPM · Eliminates need to throttle engine down during momentary work stoppages · Four blade spider assembly features economically replaceable wear parts that reduce maintenance costs over the life of the machine · Proven gearbox durability delivers years of trouble-free operation · Handle assemblies for the InstaClutchTM system include a Standard or QuickPitchTM option Technical specifications MODEL ROTOR RPM 36-INCH (914 MM) JH55C 60-115 JH90C 60-130 46-INCH (1218 MM) BH11C 60-130 BH90C 60-130 ENGINE HONDA GX160 HONDA GX270 HONDA GX340 HONDA GX270 HP (KW)1 4.8 (3.6) 8.5 (6.3) 10.7 (7.9) 8.5 (6.3) LBS (KG) HANDLES 164 (74.3) 190 (86.1) SXHC OR QXHC 247 (112) 245 (111) SXHC OR QXHC 1 See page 50 for details. WHITEMAN HEAVY-DUTY TROWELS Features · High-speed models for burnishing of slabs · Heavy-duty gearboxes to handle extra weight and performance of the HDA series · Variable-speed transmission on HDA48413H · CVT drive system allows the high torque panning and high speed for burnishing slabs Technical specifications MODEL HDA48413H COVERAGE BLADES IN (MM) 48 (1,220) 4 ROTOR RPM 30-225 ENGINE HONDA HP WEIGHT (KW)1 LBS (KG) 11.7 (8.7) 315 (166) 1 See page 50 for details. 38 CONCRETE/MASONRY WALK-BEHIND TROWELS RIDE-ON TROWELS WHITEMAN TROWELS Features · R eliable gasoline engines and electric motors · O ptional QuickPitchTM Control for fast, precise blade adjustment · Equipped with heavy-duty centrifugal clutch · O ptional manual (hand) clutch · Precision balanced for the ultimate finish · C A4HM has folding handle · J3036H55 edger converts from 30" to 36" Technical specifications MODEL CA4HM CA4HC J36E2 J3036H55 J36H55 J36H90H B46H90 B46H11H COVERAGE IN (MM) 24 (610) 24 (610) 36 (914) 36 (914) 36 (914) 36 (914) 46 (1,170) 46 (1,170) HP (KW)1 3.5 (2.6) 3.5 (2.6) 2 (1.5) 4.8 (3.6) 4.8 (3.6) 8.5 (6.3) 8.5 (6.3) 9.5 (7.1) MOTOR HONDA HONDA 230V HONDA HONDA HONDA HONDA HONDA RPM 70-130 70-130 30-160 60-115 60-115 90-155 60-130 90-155 1 See page 50 for details. WHITEMAN TROWELS MECHANICAL DRIVE Features · T win 36" and 48" models · H HNG5 features air-cooled 35 HP Vanguard engine · T win Pitch control simultaneously adjusts blade pitch of rotors or disengages to adjust individually · C VT Drive System allows high-torque panning and high-speed for burnishing slabs Technical specifications MODEL JWN24HTCSL HHNG5 HHXDF5 PATH WIDTH IN (MM) 75 (1,910) 92 (2,336.8) 92 (2,336.8) ROTOR RPM ENGINE 30-180 0-180 0-180 HONDA VANGUARD KUBOTA WG972 HP WEIGHT (KW)1 LBS (KG) 24 (17.8) 685 (209) 35 (26) 1,083 (491) 31 (22.8) 1,654 (750) 1 See page 50 for details. CONCRETE/MASONRY multiquip.com 39 RIDE-ON TROWELS WHITEMAN HYDRAULIC DRIVE TROWELS/ ELECTRIC DRIVE POWER FLOAT Features · Patented Engine Power management senses engine load and adjusts hydraulic pump stroke allowing engine to run at peak efficiency · 6-ft, 8-ft, 10-ft, & 12-ft models available · Optimum speed and torque range for floating and finishing · SmartPitch, cruise control, and LED lighting · Tier 4 final Hatz engines on STX6H/HTX6H models · Ford Power Products engines on STXDF/PRX models · Clamshell design simplifies maintenance and permits convenient access to all service items · Gasoline/Propane option on HTXG6DF, STXDF, & PRX · Lights and spray system factory-installed on LD6SL Technical specifications MODEL LD6 LD6SL HTX6H STX6H STXDF HTXG6DF PRX PATH WIDTH IN (MM) 75 (1950) 75 (1950) 92 (2,336.8) 117 (2,971.8) 117 (2,971) 92 (2,336.8) 146 (3708) ROTOR RPM ENGINE 0-140 0-140 0-160 0-130 0-150 10-160 0-100 BRIGGS & STRATTON V TWIN BRIGGS & STRATTON V TWIN HATZ TURBO DIESEL (TIER 4 FINAL ) HATZ TURBO DIESEL (TIER 4 FINAL ) 2.5 LITER FORD POWER PRODUCTS DUAL FUEL PSI 2.4L DUAL FUEL 3.7 LITER FORD POWER PRODUCTS DUAL FUEL HP (KW)1 23 (17) WEIGHT LBS (KG) 865 (393) 23 (17) 865 (393) 70 (52.1) 2,345 (1,063) 70 (52.1) 2,544 (1,153) 84 (61) 2600 (1179.3) 68 (50.7) 2,133 (968.6) 107 (79) 4166 (1889) 1 See page 50 for details. 40 CONCRETE/MASONRY CHEMICAL SPRAYERS CHEMICAL SPRAYING SYSTEM Features · D urable 5.5 HP gear reduction Honda GX160 engine allows for years of trouble-free service · W SC55BM attachment offers the versatility of moving from a rolling cart to a stationary barrel for ease of application · Q uick disconnect hoses offer the ability to quickly change from one product to another · C hemical Platform is sloped by design to allow all liquid to easily be dispensed from any container · T ow handle allows this unit to be moved on the job site by hand unloaded, or with an all-terrain fork truck when loaded · E ngine driven compressor allows the operator to recycle any leftover product remaining in the system back into the original container (Compressor Offered on WSC55 only) · S imple parking brake allows the unit to be secured on unstable or uneven ground at all times · S mooth tires have no tread to reduce risk of surface defects · E asy access to hose connections · A ccessory tray enables all fittings and nozzles to be kept in one location · O perating weight: 290 LBS Technical specifications MODEL ENGINE HP (KW)1 LBS (KG) FUEL CAP. GPM PUMP TYPE WSC55 WSC55BM (BARREL MOUNT) WSC55C (CART ONLY) HONDA GX160 4.8 (3.6) 290 (131) .825 US GL 7 @ 125 PSI HONDA GX160 4.8 (3.6) 82 (37) .825 US GL 7 @ 125 PSI ROLLER ROLLER 1 See page 50 for details. CONCRETE/MASONRY multiquip.com 41 CONCRETE SOLUTIONS MQ WHITEMAN CONCRETE SOLUTIONS For more than 75 years, MQ Whiteman has been recognized around the world as the leader in flat floor placement and finishing. Now we expand our line with a revolutionary group of environmentally-friendly chemical solutions. MQ SlabArmorTM Products will forever change the way concrete is placed, finished and maintained. SlabArmorTM Finishing Solutions Using walk-behind or ride-on power trowels, the SlabArmorTM patented curing formula and application process starts working immediately when applied during concrete placement. The nano-sized technology creates a hydration-enhancing vapor barrier and allows the contractor unprecedented control over the finishing process, extending the time to finish concrete in all weather conditions. Through this patented system, SlabArmorTM creates even hydration resulting in denser concrete and flatter floors with minimized cracking or curling. SlabArmorTM Starter/Closer SlabArmorTM Starter / Finishing Aid SlabArmorTM refines the surface of the slab while retaining 97% of the placement water, significantly minimizing volume loss, cracking and curling. SlabArmorTM Closer / Densifier This spray on, leave on material is a fast acting formula allowing for minimal down time. With the SlabArmorTM system, consolidation of the construction schedule is possible due to all curing and densification happening at time of placement by the flatwork contractor. It is suitable for use on cementitious-based products and can be used in conjunction with diamond polishing and/or decorative color. 42 CONCRETE/MASONRY CONCRETE SOLUTIONS SlabArmorTM Plus Maintenance Solutions SlabArmorTM Plus products assist in the restoration and revitalization of existing concrete, while they also protect and maintain your SlabArmorTM cured concrete. Through continued use, MQ SlabArmorTM Plus products create a denser, more sustainable finish over time. This also includes a family of pH neutral products that effectively removes the built-up concrete from concrete mixer drums and equipment in an environmentally responsible manner. SlabArmorTM Plus Clean&Condition This high performance neutral pH cleaner, conditioner and restorer quickly releases oils and deposits from the floor surface through a sophisticated proprietary chemical matrix of hyper-effective wetting agents. SlabArmorTM Plus Clean&Condition is specially formulated to clean and enhance polished concrete. Regular use will increase the abrasion resistance of any concrete floor. SlabArmorTM Plus Condition&Restore Cleaning floors has never been easier. SlabArmorTM Plus Condition&Restore is a powerful, easy to use cleaner that restores gloss and durability to floors while washing away dirt, grime and any other undesirable materials. This economical product will reduce the amount of labor required in the cleaning process, as well as extend the life of the floor. SlabArmorTM Plus Seal&Shine A reactive penetrating product that forms an insoluble chemical bond to produce a dense sealed surface, with superior hardness, enhanced gloss and slip resistance. PermaMeltTM Can be used as an Anti-Icer to prevent accumulation of snow and ice before the storm, or as a De-Icer after the storm to facilitate ice and snow removal. SlabArmorTM Plus Equipment Wash (Not pictured.) Achieve results that last while reducing maintenance expenses and upkeep requirements over the life of your equipment. SlabArmorTM Plus Drum Wash Attain greater levels of ROI and increase overall operating efficiencies by hauling only what you get paid for. CONCRETE/MASONRY multiquip.com 43 CONCRETE SOLUTIONS ALPHA CONCRETE & MORTAR DISSOLVER Alpha Concrete & Mortar Dissolver is a liquid compound specifically formulated to dissolve built up cement or mortar on tools and equipment. Features · Removes all types of cement, concrete, mortar, grout and stucco · Removes mineral deposits from any surface · 100% biodegradable, non-corrosive and acid-free · Will not cause rust or corrosion · Safe to use on metals, equipment, wood, glass or painted surfaces · Removes efflorescence from decorative concrete · Fast acting and odorless Technical specifications MODEL Description ALPHA22C12 ALPHA44P ALPHA05 ALPHA05P ALPHA55 ALPHA55P (12) 22 OZ BOTTLE/CASE (44) CASES/PALLET 5 GAL PAIL (36) PAILS/PALLET 55 GAL DRUM (4) 55 GAL DRUMS/PALLET 44 CONCRETE/MASONRY SAWS & BLADES DIAMOND BLADES Features · T rusted Diamond Blades for cured concrete, asphalt, green concrete, masonry materials, tile and stone · M ultiple blade diameters and quality grades · L aser weld technology, industrial steel cores and top quality diamond matrix formulas · Guaranteed operating performance DIAMOND CUP WHEELS & GRINDING DISCS Features · T op quality manufactured Grinding Wheels for cured concrete, mortar and all masonry materials · E asily adapt to right-angle grinders and grinding machines · M ultiple disc diameters available · G uaranteed operating performance DIAMOND CORE BITS Features · H igh performance core bits for cured concrete, asphalt, tile, stone and masonry materials · L aser weld technology · M ultiple bit diameters available · G uaranteed operating performance CONCRETE/MASONRY multiquip.com 45 NOTES 46 NOTES multiquip.com 47 NOTES 48 NOTES multiquip.com 49 NOTES 1 Engine power ratings are calculated by the individual engine manufacturer and the rating method may vary among engine manufacturers. Multiquip Inc. and its subsidiary companies make no claim, representation or warranty as to the power rating of the engine on this equipment and disclaim any responsibility or liability of any kind whatsoever with respect to the accuracy of the engine power rating. Users are advised to consult the engine manufacturer's owners manual and its website for specific information regarding the engine power rating. 50 ORDERING PARTS ONLINE Ordering parts has never been easier! Choose from three easy options: ORDER VIA INTERNET (Dealers Only): Best Deal Order parts on-line using Multiquip's SmartEquip website! · V iew Parts Diagrams · O rder Parts · P rint Specification Information Go to www.multiquip.com and click on Online Ordering to log on and save! If you have an MQ Account, to obtain a Username and Password, E-mail us at: parts@multiquip.com. To obtain an MQ Account, contact your District Sales Manager for more information. Use the internet and qualify for a 5% Discount on standard orders for all orders which include complete part numbers. Note: Discounts Are Subject To Change ORDER VIA FAX (Dealers Only): All customers are welcome to order parts via Fax. Domestic (US) Customers dial: 1-800-6-PARTS-7 (800-672-7877) ORDER VIA PHONE: Domestic (US) Dealers Call: 1-800-427-1244 NON-DEALER CUSTOMERS: Contact your local Multiquip Dealer for parts or call 800-427-1244 for help in locating a dealer near you. INTERNATIONAL CUSTOMERS: should contact their local Multiquip Representatives for Parts Ordering information. WHEN ORDERING PARTS, PLEASE SUPPLY: · Dealer Account Number · Dealer Name and Address · Return Fax Number · Applicable Model Number · Shipping Address (if different than billing address) · Quantity, Part Number and Description of Each Part SPECIFY PREFERRED METHOD OF SHIPMENT: · U PS/Fed Ex (Priority One, Ground, Next Day or Second/Third Day) · DHL · Truck NOTICE: All orders are treated as Standard Orders and will ship the same day if received prior to 12PM PST. All major credit cards accepted. multiquip.com 51 For more information or to request a specific product brochure Call: 800-421-1244 International: 310-537-3700 MULTIQUIP INC. 6141 KATELLA AVE, SUITE 200 CYPRESS, CA 90630 TEL: 310-537-3700 TEL: 800-421-1244 FAX: 310-537-3927 E-MAIL: mq@multiquip.com www.multiquip.com SALES DEPARTMENT TEL: 800-426-1244 FAX: 310-537-1986 FAX: 800-556-1986 PARTS DEPARTMENT TEL: 800-427-1244 FAX: 310-637-3284 FAX: 800-672-7877 SERVICE DEPARTMENT TEL: 800-478-1244 FAX: 310-537-4259 MULTIQUIP INC. CANADA 4110 INDUSTRIEL LAVAL, QC, H7L 6V3 TEL: 450-625-2244 TEL: 877-963-4411 FAX: 450-625-8664 EMAIL: infocanada@multiquip.com INTERNATIONAL SALES, PARTS, SERVICE TEL: 310-537-3700 Connect with us on © COPYRIGHT 2021, MULTIQUIP INC. REVISION (3-21_BREN)Adobe PDF Library 15.0 Adobe InDesign 16.1 (Macintosh)