Index of /resource-library
Installation instructions for iColor® White RIP Underprint Plugin on the iColor® 700 and Using Spot White UniNet 3232 W. El Segundo Blvd., Hawthorne, California 90250 | sales@icolorprint.com www.icolorprint.com Table of Contents Installing the white RIP underprint option................................................................................................... 3 - 7 Using spot white............................................................................................................................................... 8 11 Consult the iColor® knowledge base for more information: www.icolorprint.com/support Technical Support Email: support@icolorprint.com Technical Support Phone: 631-590-1040, Option 2 UniNet 3232 W. El Segundo Blvd., Hawthorne, California 90250 | sales@icolorprint.com www.icolorprint.com Page 2 Installing the iColor® 700 White RIP Underprint Option Step 1 of 9: Launch EDGE2Print software on your PC Step 2 of 9: Open the file `Install White ICC.exe', click Install ICC for White Toner UniNet 3232 W. El Segundo Blvd., Hawthorne, California 90250 | sales@icolorprint.com www.icolorprint.com Page 3 Step 3 of 9: Wait until the process is finished. Click the button to close. ICC profile for white toner underprint option is now installed Step 4 of 9: Open the folder of EDGE2Print, click EDGE2Print.exe. Make sure no other versions of the software is running, including APEX2Print UniNet 3232 W. El Segundo Blvd., Hawthorne, California 90250 | sales@icolorprint.com www.icolorprint.com Page 4 Step 5 of 9: Insert the appropriate IP addresses and click Save Step 6 of 9: Click Options->Software->White Toner from the tool bar UniNet 3232 W. El Segundo Blvd., Hawthorne, California 90250 | sales@icolorprint.com www.icolorprint.com Page 5 Step 7 of 9: Click Import License, navigate to the file `White_Toner_Enabled.dat' , click open to enable white toner. UniNet 3232 W. El Segundo Blvd., Hawthorne, California 90250 | sales@icolorprint.com www.icolorprint.com Page 6 Step 8 of 9: Click Media from the toolbar, you will see White Toner tab. Step 9 of 9: You can create your own media based on this profile, but you won't have color management options for them. UniNet 3232 W. El Segundo Blvd., Hawthorne, California 90250 | sales@icolorprint.com www.icolorprint.com Page 7 Using Spot White Note: If you want to print white, the color MUST be spot White. The following are simple instructions to change a color to spot white in AI. Step 1 of 4: Open you file in AI. Click Window->Color and Window->Swatches to show COLOR and SWATCHES windows. UniNet 3232 W. El Segundo Blvd., Hawthorne, California 90250 | sales@icolorprint.com www.icolorprint.com Page 8 Step 2 of 4: Select the area where you want white print, then double click White on SWATCHES. UniNet 3232 W. El Segundo Blvd., Hawthorne, California 90250 | sales@icolorprint.com www.icolorprint.com Page 9 Step 3 of 4: Change the color type from process color to spot color. Then click OK. Make sure the swatch name is "White". It is very important! UniNet 3232 W. El Segundo Blvd., Hawthorne, California 90250 | sales@icolorprint.com www.icolorprint.com Page 10 Step 4 of 4: Now you have spot white for the selected area. You can tell from the COLOR window which shows White 100%. Repeat Step 3 and 4 for all area you want to be spot white and save the file. UniNet 3232 W. El Segundo Blvd., Hawthorne, California 90250 | sales@icolorprint.com www.icolorprint.com Page 11Acrobat Distiller 9.0.0 (Windows)