Mi True Wireless Earphones Lite User Manual

Product Overview

This section describes the components of the Mi True Wireless Earphones Lite.

Charging Case

• Indicator Light: Shows charging status.
• Function Button: Used for activation and other functions.
• Touch Button: For touch controls.
• Charging Port: USB Type-C port for charging the case.

Earphones

• Ear Tip: Provides a comfortable and secure fit.
• Microphone: For calls and voice commands.
• Touch Button: For touch controls.

Illustrations are for reference only. Actual product may vary.

Instructions

Charging

Charging the Earphones

Place the earphones in the charging case; they will start charging automatically.

Charging the Charging Case

Use the included USB charging cable. The indicator blinks white while charging and turns off when fully charged.

Note: For first-time use, activate earphones by placing them in the case and pressing the function button for 5 seconds. Fully charge before first use.

Checking Battery Level

Earphones Battery Level

Connect to a phone; check the battery level on the phone's status bar. The status bar shows the lowest earphone's battery level.

Charging Case Battery Level

Press the button on the charging case. White indicator means sufficient charge; blinking white means low charge. Recharge when low.

Checking with a Mi Phone

Ensure earphones are connected via Bluetooth to your Mi phone. Place earphones in the case, hold the button for 2 seconds. A notification will show battery levels.

Note: Update your Mi phone to the latest stable version for this feature.

Turning On

Press and hold the button for 2 seconds, or remove earphones from the charging case.

Sleep Mode

Place earphones back in the charging case; they will disconnect and enter sleep mode automatically.

Wearing

1. Remove earphones from the case and insert into ears, noting L (left) and R (right) marks.
2. Switch ear tip sizes for a better fit (M is default).

Note: Place earphones back in the case after use to extend lifespan and prevent loss.

Connecting

Connecting to a New Device

1. Remove earphones from the case for first use; they enter pairing mode. Place in case, press and hold button for 2 seconds until indicator blinks.
2. Enable Bluetooth on your device, find and connect to "Mi TW Earphones Lite". Enter "0000" if prompted for a passcode.

Connecting with a Mi Phone

Unlock your Mi phone and enable Bluetooth. Place earphones in the case, hold close to the phone. Press and hold button for 2 seconds, follow on-screen instructions.

Note: Fast connection is supported by some Mi phones; update your phone.

Automatic Connection

Removing earphones from the case automatically connects to the last used Bluetooth device. If no history or connection fails, they enter pairing mode.

Note: If auto-connect fails, manually connect via device's Bluetooth settings.

Connect to a New Device (Alternative Method)

Place earphones in the charging case, press and hold button for 2 seconds. Indicator blinks white, earphones enter pairing mode. Enable Bluetooth on your device and connect.

Clearing Connection History

Place earphones in the charging case, press and hold button for 10 seconds. Indicator stays white for 5 seconds, then blinks white, entering pairing mode.

Note: Bluetooth signal interference in dense environments may cause occasional disconnects or no sound.

Function Overview

Incoming Calls

Gently tap either earphone twice: Answer/End calls.

Music and Voice Assistant

• Both Earphones:
  • Right (R) earphone tapped twice: Play/Pause music.
  • Left (L) earphone tapped twice: Access voice assistant.
• Removing an Earphone: Pauses music.
• One Earphone: Tapped twice: Play/Pause music.

Notes:

• Voice assistant requires device support and permission.
• When using only the left earphone, place the right earphone in the case and close the lid.

Specifications

WEEE Information

Products with this symbol are Waste Electrical and Electronic Equipment (WEEE) and should not be mixed with unsorted household waste. Dispose of them at designated collection points for recycling to protect human health and the environment. Contact local authorities for more information.

♻️ Waste Electrical and Electronic Equipment

Safety Precautions

• Do not expose batteries to excessive heat (sunshine, fire).
• Do not replace batteries with incorrect types, as this can cause fire, explosion, or leakage.
• Do not dispose of batteries in fire or hot ovens, or crush/cut them, as this can cause explosions.
• Avoid extremely high temperatures or very low air pressure, which can lead to explosions or leaks.
• Risk of explosion if battery is replaced by an incorrect type.
• Dispose of used batteries according to instructions.
• Maximum operating ambient temperature: 45°C.
• To prevent hearing damage, do not listen at high volumes for extended periods.

Declarations and Trademarks

EU Declaration of Conformity: Tiinlab declares that the radio equipment type TWSEJ03WM complies with Directive 2014/53/EU. Full text available at: http://www.mi.com/global/service/support/declaration.html

⚡ Symbol indicates DC voltage.

Bluetooth® word mark and logos are registered trademarks of Bluetooth SIG, Inc. used under license by Tiinlab.

Manufactured for: Xiaomi Communications Co., Ltd.

Manufacturer: Tiinlab Acoustic Technology Limited (a Mi Ecosystem company)

Address: Tianliao Building 1403, Tianliao Industrial Area A, Taoyuan Street, Nanshan District, Shenzhen 518055, China

For more information, visit: www.mi.com

Warranty Notice

As a Xiaomi consumer, you benefit from additional warranties under certain conditions. These are supplementary to your national consumer law. For details, refer to Xiaomi's official website (https://www.mi.com/en/service/warranty/). After-sales services are limited to the country/region of purchase. Xiaomi may, at its discretion, repair, replace, or refund. Normal wear and tear, force majeure, abuse, or user negligence are not covered. Contact the seller if you have doubts. Warranties do not apply in Hong Kong and Taiwan. Products not duly imported, manufactured, or acquired from Xiaomi or an official seller are not covered. You may benefit from warranties from the non-official retailer.