VSYSTO D6WL MOTORCYCLE DASH CAM

Before using the product

This product records videos while the motorcycle is operating. Use this product only for reference when investigating incidents or road accidents. This product is not guaranteed to record ALL events. The device may not properly record accidents with small impacts that are too minor to activate the impact sensor or accidents with massive impacts that cause the motorcycle's battery voltage to deviate. Video recording does not begin until the product is completely turned on (booted up). To ensure that all motorcycle events are recorded, wait until the product is completely booted up after turning it on, and then begin operating the motorcycle. VSYSTO is not responsible for any loss caused by an accident, nor is it responsible for providing any support regarding the outcome of an accident.

During use of the product

Read the following safety information to properly use the product.

• Do not operate the product while driving a motorcycle. Distraction while driving may cause accidents and result in injury or death.
• Do not install the product in a place exposed to flammable gas. Doing so may result in fire or an explosion.
• Do not use the product in a place with high humidity or temperature. It may cause malfunction of the product, explosion, or fire.
• Do not disassemble the product or subject the product to impact. Doing so may damage the product. Unauthorized disassembly of the product voids the product warranty.
• Do not fully submerge the product in water. Doing so may damage the product.
• Do not use the product outside for a prolonged period of time when it is raining. Doing so may cause water damage to the product.
• Do not clean the product with chemicals or detergent. Doing so may damage the product. Clean the product using a clean, soft, dry fabric.
• Ensure that the memory card is in the correct direction before inserting it into the product. The memory card slot or the memory card may be damaged if it is inserted incorrectly.
• Please format cards before use and anytime a significant amount of data has been collected to ensure that the device and SD cards are working properly together. It is recommended to format the TF card at least once a week.
• Use the product at a temperature between -20°C to 65°C. The product may not function as designed and some permanent physical damages may result if it is operated out of the specified temperature ranges. Such damages are not covered by the warranty.
• The product emits electromagnetic radiation that might interfere with medical devices. Consult with your physician and your device manufacturer if you are uncertain whether you can use this device.
• Please use this product to the extent permitted by law.

Packing List

The items may vary for different buying options.

• Main unit
• Cam 1 & extension cable
• Cam 2 & extension cable
• Wired Controller
• ACC power cable
• USB test cable
• Main unit mount

Main unit structure

The product design may change without prior notice.

Card slot, Mounting hole, Cam 1, Wired controller, Power cable, Cam 2

Connection Diagram

The connection may change without prior notice.

A diagram shows the connections between the main unit, cameras, controller, and power cable.

Getting Started

Inserting a Memory Card

Insert the memory card into the card slot until it clicks. To remove the memory card, push to eject the memory card out of the slot.

NOTE:

• Make sure to insert the memory card in the right direction.
• Do not remove or insert the memory card when the device is being powered on. This may damage the memory card.
• Please use a high-speed micro SD card with CLASS⑩.
• Please format cards before use and anytime a significant amount of data has been collected to ensure that the device and SD cards are working properly together.

Power On/Off

The dash cam will automatically power on/off once the ignition switch is on/off when you completed the correct installation.

Video Recording

Normal Video Mode

It starts video recording automatically when power on and the TF card is inserted. Stop recording automatically when power off.

Emergency Video Mode

• G-Sensor Event Recording: It will automatically activate emergency recording mode when detecting a collision. The LED indicator of wired remote will flash quickly. It will save video files named 'GSR 001 002 003....'
• Manual Event Recording: Press the emergency button of wired remote during the recording to manually activate emergency recording mode. The LED indicator of wired remote will flash quickly. It will save video files named ‘’KEY 001 002 003....'

Video file name information: REC_220609-163256F.TS

• "REC" means normal video file
• "GSR" means file recorded by triggering G-sensor
• "KEY" means file recorded by pressing controller
• "220609” means date June 9, 2022
• "163256" means time 16 o'clock 32 minutes 56 seconds
• "F" means front camera video file

NOTE:

1. You cannot record video without a micro SD card inserted.
2. Video files recorded in emergency mode are protected from being overwritten(Maximum 10).

Video Playback

Playback on the mobile device

• Wi-Fi: Connect to the dash cam through Wi-Fi APP (Android & iOS), you can easily play back videos on your mobile device.
• OTG: Plug the micro SD card into your mobile device with an OTG card reader (need your mobile device support OTG). You will find the FRONT and REAR video file folder when you access the memory card and then select the video you want to play.

Playback on the computer

Plug the micro SD card into an available USB port on your computer with a USB card reader. You will find the FRONT and REAR video file folder when you access the memory card and then select the video you want to play.

Wi-Fi Connection

When successfully connected with your smartphone via built-in Wi-Fi, you can save and playback the driving recording videos on your smartphone. You can also change settings of dash cam via Wi-Fi app.

1. Scan the QR code below to download the latest App from Google Play and App Store. Or you can search ‘Wifi Camera' on Google Play or App Store to download it.

QR code for iOS, QR code for Android, App logo

1. Select 'MotoDV_D6' from available Wi-Fi network to connect. The default password is '1234567890'.
2. Wi-Fi app operation
   The camera will pause the recording when you open Wi-Fi App (connected successfully) and Enter recorder during recording, and start recording automatically after 30 seconds without any operation or 30 seconds after you quit the App. Also, you can start/stop recording manually via the Wi-Fi App.
   Click [stop] to stop recording manually. Click [record] to start recording manually.
   Click [camera] to take photo.
   Click [switch camera] to switch front and rear camera. Click [fullscreen] to enter/exit full screen view.
   Click [back] to go back to the previous menu.

ATTENTION

• If you failed to connect to the camera, please check if you have any pop-up tips to notify you there is no internet for the connected wifi network and if you will stay connected. Just say YES and everything will work great. Some may have no this kind of notification, so we recommend you Turn Off Cellular Data when using the WiFi app.
• Contact seller if it encounters an error when setting the SSID.

Quick Installation Guide

ATTENTION

• Please do NOT flush the main unit, lenses, power module, and wired controller with the high-pressure water gun.
• Do not bend the cable nor twist the connector during installation.
• The position of the main unit and lens cable should be away from the high-voltage circuit like xenon lamp, ignition plug etc.
• If your motorcycle is a traditional carburetor system please try to change a suitable R-value ignition plug when you meet the interference phenomenon.

Diagram showing the placement of the Power module, Controller, Main unit, CAM 1, and CAM 2 on a motorcycle.

Quick Test

1. Connect cam 1 & cam 2 to the dash cam main unit.
2. Find the USB test cable and connecting to the power bank or USB adaptor to do a quick test before installation.
3. Prepare installation if everything looks good.

Diagram showing connection of cameras to the main unit, and connection to a power bank or USB adapter. Text notes indicate correct color and arrow direction for connections, and required voltage and current for the USB power source.

Camera Installation

Diagrams illustrate mounting the camera using a bracket, double-sided foam tape, and screws. A note advises keeping the extension cable.

Power Module Installation

Diagrams show connecting the power module to the motorcycle battery (positive and negative terminals) and a 12V wire controlled by the key ignition (ACC port). Text explains the connections.

Wired Controller

LED Light Frequency & Camera Status Table:

LED Light: Display the camera working status.

Buttons: Short press any button of the wired controller in video mode to activate emergency recording mode. It will lock and save emergency video files (named as "KEY 001 002 003....") and take the snapshot.

NOTE: The recorder will lock the latest 10 emergency recording videos(GSR-XXXX / KEY-XXXX) from being overwritten, and after more than 10, the recorder will automatically start to overwrite the earliest locked emergency video.

Contact Us

VSYSTO constantly optimizes and strives for excellence to make driving safer, and smart. Share your product experience and story to inspire someone else. If you have any thoughts on how VSYSTO can do even better, constructive feedback and suggestions are welcome. Please do not hesitate to contact VSYSTO by below ways.

• Email: support-us@vsysto.com
• Facebook: https://www.facebook.com/szvsys
• YouTube: https://www.youtube.com/c/szvsys

Shenzhen V-SYS Technology Co.,Ltd.
302, BUILDING A9, TIANRUI INDUSTRIAL PARK, NO. 35, FUYUAN FIRST ROAD,
ZHANCHENG COMMUNITY, FUHAI STREET, BAO AN DISTRICK, SHENZHEN, CHINA