Homepage - dbTechnologiesdbtechnologies.com/qrcode/001094/
User Manual for dBTechnologies models including: IA504R Professional Amplifier, IA504R, Professional Amplifier, Amplifier
QUICK START USER MANUAL SECTION 1. 1 info@dbtechnologies-aeb.com. IA504R is the new dBTechnologies professional amplifier.
20 hours ago — QUICK START USER MANUAL SECTION 1. 1 info@dbtechnologies-aeb.com. IA504R is the new dBTechnologies professional amplifier.
File Info : application/pdf, 4 Pages, 1.45MB
DocumentDocumentIA504R &+ QUICK START USER MANUAL SECTION 1 DIMENSIONS 222 4 4 420120398Q REV1.0 256,5 (263) MAIN FEATUR8ES6%'DWD &RQWURO ·4 channels digital amplifier for passive speakers ·Powerful DSP ·Compact halfra[ck s'ize630DWUL[ ·Quick installation ·AURORA Net control ·Multiple configuration options UHJUDLJESLCRRIPTION SPECIFICATIONS Amplifier Type Frequency Response [±0.5dB] Amplifier Gain Signal to Noise Ratio Input Sensitivity Crosstalk 4 channels digital amplifier - half rack 20 - 20000 Hz 31 dB >103 dB(A) +4 dBu 100 dB RORU IA504R is the new dBTechnologies professional amplifier for passive speakers with integrated RDNet connections for a remote in-depth control and configuration using Maximum Input Level Input Impedance +18 dBu 20 kOhm AURORA NET software. The device is equipped with a powerful amplifier section, capable of handling up to 500 W (RMS power) in 4 channels and controlled by a Amplifier Power Supply Class-D Full-range SMPS DSP, which can perform a detailed customization of the output of the speakers. The mechanical design allows an Cooling Fan forced (front to back) easy, accurate and quick installation in half, 1U rack or flat Operating Range 100-240V~ (50-60Hz) surface thanks to the optional brackets. In addition, the user can load presets for dBTechnologies passive speakers using AURORA NET software to provide an excellent listening experience. RMS Out Power single channel Peak Power single 280 W @ 4 , 245 W @ 8 135 W @ 16 , 280 W @ 8 (bridge) 250 W @ 70V, 240 W @ 100V 425 W @ 4 , 245 W @ 8 , PACKAGE CONTENTS The box contains: ·n.1 IA504R amplifier ·n.1 mains cable ·n.3 Euroblock 3.81mm connectors channel RMS Out Power 4 channels Peak Power 4 channels 135 W @ 16 , 619 W @ 8 (bridge) 70 W @ 4 , 70 W @ 8 , 70 W @ 16 , 140 W @ 8 (bridge), 140 W @ 70V, 140 W @ 100V 225 W @ 4 , 180 W @ 8 , 125 W @ 16 , 440 W @ 8 (bridge) ·n.2 Euroblock 5.08mm connectors Limiter Dual Active Peak, RMS, Thermal DQWLJUDIILRVDWLQDWRVSHVVRUHPP This quick start and warranty documentation Controller 32 bit DSP AD/DA Converter 24 bit/48 kHz ACCESSORIES Control Reset button 772 SHUVXSSRUWLPHWDOOLFLHUHVLVWHQWHDOO¶DFTXD Signal Input connector Euroblock 3.81mm Signal Output connector Euroblock 5.08mm RDNet connectors Data In/Data Out USB connector USB B-type (for DATA CONTROL) VFUDWFKSURRIJOD]HGWKLFNQHVVPP Dimensions (WxHxD) 222x44x256 mm (8.7x1.7x10.1 in) RMK-1 rack and surface mount kit Weight 1.82 Kg (4.01 lbs.) 72 IRUPHWDOVXSSRUWDQG1ZDWHUUHinVfoL@VdWbDtecQhnWologies-aeb.com IA504R FRONT PANEL 1 2 3 REAR PANEL 8 QUICK START USER MANUAL SECTION 1 420120398Q REV1.0 7 45 9 I/O AND CONTROL PANEL The amplifier is controlled by a powerful DSP. All the connections, except USB Data control, are in the rear amplifier control panel. 1- Remote Active LED 6 2- Power/Standby LED 3- Reset button 4- Bridge Mode LED 5- Signal LED 6- USB Data Control 7- Peak Fault LED 8- Analog audio Inputs 9- GPIO/Standby ports 10- RDNet Data In/Data Out 11- Power Outputs 12- Full-range Mains Input 10 11 12 POWER SUPPLY SPECIFICATIONS (POWER ABSORPTION) Draw at 1/8 of full power in average use conditions (*): 0.36 A (220-240V~) - 0.66 A (100-120V~) Draw at 1/3 of full power in average use conditions (**): 0.7 A (220-240V~) - 1.4 A (100-120V~) Power absorption with speaker turned on without signal (idle): 0,16 A (220-240V~) - 0.25 A (100-120V~) *INSTALLER NOTES: The values refer to 1/8 of full power, in average operating conditions (music program with infrequent or no clipping). It is recommended to consider them the minimum sizing values, for any type of configuration. **INSTALLER NOTES: The values refer to 1/3 of full power, in heavy operating conditions (music program with frequent clipping or activation of the limiter. We recommend sizing according to these values in case of professional installations and tours. Balanced analog signal Connect the positive and negative pole, and the ground of the input signal to the corresponding input on the amplifier. INPUT SETTINGS Unbalanced analog signal Connect the positive pole and the ground of the input signal to the corresponding input on the amplifier. ,1 ,1 ,1 ,1 ,,11 ,,11 ,,11 ,1,1 -XPSHUEHWZHHQ 1HJDWLYH>@DQG*1' ,1 ,1 ,1 ,1 -XPSHUEHWZHHQ 1HJDWLYH>@DQG*1' %DODQFHG$QDORJ,1 ,1 ,1 ,1 ,1 %8DQO%DDQOFDHQGF$HGQD$OQRDJOR,1J,1 ,1 ,1 ,1 ,1 8Q%DODQFHG$QDORJ,1 287387 2 287387 info@dbtechnologies-aeb.com IA504R QUICK START USER MANUAL SECTION 1 420120398Q REV1.0 Stereo setup Connecting a pair of speakers in stereo mode. Recall the correct setup from the software AURORA NET in the Setup => Output section. The minimum impedance must be 4 Ohms. OUTPUT SETTINGS Bridge setup Connecting a speaker in bridge mode. Recall the correct setup from the software AURORA NET in the Setup => Output section. The minimum impedance must be 8 Ohms. 70/100V setup Connecting speakers in 70/100V mode. Recall the correct setup from the software AURORA NET in the Setup => Output section. AURORA NET SETTINGS For a quick setup connect a PC/Mac to the amplifier using a USB cable, download and open AURORA NET software* and click on Setup section (Fig.1) and then on Configure button. From the Output Settings page that will open up (Fig.2), the user can adjust the output mode between different choices. Click on the Load button to load presets for dBTechnologies passive speakers (Fig.3). *please be sure to download the latest version of the software. Check it on www.dbtechnologies.com MONITORING ROUTING EQ LIMITER GPIO SETUP LOAD/SAVE LOG INPUT OUTPUT SPEAKER SETUP INPUT 1-2 ANALOG OUT 1 OUT 2 FLAT 4 OHM FLAT 4 OHM CONFIGURE SYSTEM NAME: IA 504 [1] IDENTIFY: IDENTIFY INPUT 3-4 ANALOG GROUNDING FLOATING OUT 3 OUT 4 FLAT 4 OHM FLAT 4 OHM CONFIGURE AMPLIFIER MAIN SMPS OFF Fig.1 INSTALLATION OUTPUT SETTINGS OUT MODE SPEAKER SETUP OUT 1 FLAT 4 OHM LOAD STEREO OUT 2 FLAT 4 OHM LOAD Fig.2 OUTPUT SETTINGS OUT MODE STEREO SPEAKER SETUP IS4_T HPF EQ OUT 1 LOAD FLAT 100 MONITOR OUT 2 FLAT 4 OHM LOAD Fig.3 IA504R can be installed in different configura- tions. For a quick installation, on the front of the amplifier (A) the user can find mechanical fixing point for rack mounting. On each side (B) of the amplifier the user can find mechanical A fixing point for wall/flat surface mounting. B RACK MOUNT N.1 AMP IN A HALF RACK FRONT PANEL SIDE PANEL A B SURFACE MOUNT N.2 AMPS IN ONE RACK N.1 AMP IN ONE RACK 3 info@dbtechnologies-aeb.com IA504R QUICK START USER MANUAL SECTION 1 420120398Q REV1.0 IMPORTANT NOTES AND WARNINGS EMI CLASSIFICATION According to the standards EN 55032 and 55035 this is a class B equipment, designed and suitable to operate in residential environments. FCC CLASS B STATEMENT ACCORDING TO TITLE 47, PART 15, SUBPART B, §15.105 This equipment has been tested and found to comply with the limits for a Class B digital device, pursuant to part 15 of the FCC Rules. These limits are designed to provide reasonable protection against harmful interference in a residential installation. This equipment generates, uses and can radiate radio frequency energy and, if not installed and used in accordance with the instructions, may cause harmful interference to radio communications. However, there is no guarantee that interference will not occur in a particular installation. If this equipment does cause harmful interference to radio or television reception, which can be determined by turning the equipment off and on, the user is encouraged to try to correct the interference by one or more of the following measures: 1. Reorient or relocate the receiving antenna. 2. Increase the separation between the equipment and receiver. 3. Connect the equipment into an outlet on a circuit different from that to which the receiver is connected. 4. Consult the dealer or an experienced radio/TV technician for help. Changes or modifications not expressly approved by the party responsible for compliance could void the user's authority to operate the equipment. WARNINGS! Make sure that the device is securely installed in a stable position to avoid any injuries or damages to persons or properties. Before installing the device check all the components for damages, deformations, missing or damaged parts that may compromise safety during installation. Follow the instructions contained in this quick start user manual and on the complete user manual to properly install the device. It's suggested to keep enough distance from other devices to allow the right cooling. The warnings in this manual must be observed in conjunction with the "USER MANUAL - Section 2". Features, specification and appearance of products are subject to change without notice. dBTechnologies reserves the right to make changes or improvements in design or manufacturing without assuming any obligation to change or improve products previously manufactured. The external wiring connected to speaker output terminals requires installation by qualified personnel only. Once the equipment is installed, prevent access to the connectors to unqualified personnel. Only use the accessories and configurations described in this manual, and proceed in accordance with the instructions given in the manuals for the accessories. Only use the power cable provided. The USB SERVICE DATA connection is to be used exclusively for updating the product's firmware; do not connect any other USB device to the unit to avoid the risk of damage and malfunction. Check periodically the integrity and the functionality of the accessories and the technical equipments for a safe installation. User should never apply a load that exceeds the working load limits of any rigging components or equipment here presented. Design, calculation, installation, testing and maintanance of suspension and stack systems for audio equipment must be performed only by qualified and authorized personnel. AEB Industriale s.r.l. denies any and all responsibility for improper installations, in the absence of safety requirements. Scan with your QR Reader App to download the complete User Manual. 4 A.E.B. Industriale Srl Via Brodolini, 8 Località Crespellano 40053 VALSAMOGGIA BOLOGNA (ITALIA) Tel. +39 051 969870 Fax +39 051 969725 www.dbtechnologies.com info@dbtechnologies-aeb.com info@dbtechnologies-aeb.com