Eevo X Grom Quick Start and Ride

1. Assembly

We recommend setup by a bike mechanic, but if you're doing it yourself:

• Attach the handlebars, front wheel, front brake disc, and mudguard.
• Make sure all bolts are tight.
• Check the manual for full setup instructions.

⚠️ Warning: Loose parts can be dangerous — double-check everything before riding.

2. Charging and Installing the Battery

• Fully charge the battery before your first ride.

• Battery charge indicator: Red = charging | Green = fully charged

• Once charged, click the battery into the frame.
• Turn the isolator switch to ON.

3. Powering On & Riding

• Insert the physical key and turn it on. The screen will turn on.
• Use up/down arrows to choose assist level (0–5):
  • Level 0 = no motor or throttle
  • Level 1 = gentle assist (start here if new)
• Throttle is on the right grip (active on Level 1+).
• Use the right-side gear shifter to change gears (1–7).

4. Before You Ride

• Register your bike online to activate your warranty.
• Check brakes are working correctly (test front and rear).
• Helmet is on and secure.
• You're in a safe, open area to get used to the power assist.
• Battery is charged and securely locked in place.
• If there's an issue, smart electronics will enter safe mode to fix it. If not, an error code will show on the screen.