Double Column Mobile Desk

Instruction Manual

Specifications

Dimensions:: Width: 800mm / 31.5"; Depth: 500mm / 19.6"; Height Range: 730-1090mm / 28.7"-42.9"; Base Width: 480mm / 18.8"; Base Depth: 765mm / 30.1"

Lifting Range:: 73-109 cm

Max Load:: 15 kg / 33 lbs

Visual description of specification diagram: Shows the desk with dimensions labeled.

Official After-sales Channels

For support, please use the following channels:

Account & Lists
Orders - Get help
Choose your problem
Describe your problem
Send

Component List

Identify and verify all parts before assembly:

G Desktop x 1
H Desk Column x 2
I Side Plate x 2
J Handle Components x 1
K Crossbar x 2
L Base x 1
M Headphone Hook x 1
N Cup Holder x 1

Visual description of component list: Diagrams illustrate each component labeled G through N.

Hardware List

Hardware included for assembly:

A M6x40mm bolts x 8
B M6x30mm bolts x 8
C M5x12mm screws x 12
D Wrench x 1
E Allen Key (S=4mm) x 1
F Caster (Lockable) x 4

Visual description of hardware list: Diagrams illustrate each hardware item labeled A through F.

Assembly Instructions

Step 1: Assemble Casters

Attach the four lockable casters (F) to the base (L).

Use the wrench (D) to turn the hex bolts and screw the casters into the base. Finally, tighten the nuts with the wrench.

Visual description of Step 1: Shows casters (F) being attached to the front and back of the base (L) using bolts and a wrench. Arrows indicate the direction of attachment.

Step 2: Attach the Base to the Desk Columns

Connect the desk columns (H) to the base (L) using M6x40mm bolts (A) and the Allen key (E).

Visual description of Step 2: Illustrates the desk columns (H) being secured to the base (L) with bolts (A) and the Allen key (E). Arrows show the attachment points.

Step 3: Attach the Cross Bar to the Desk Columns

Attach the crossbar (K) to the desk columns (H) using M6x30mm bolts (B) and the Allen key (E).

Note: Remove the plastic cap before installing the crossbar.

Visual description of Step 3: Shows the crossbar (K) being attached between the two desk columns (H) using bolts (B) and the Allen key (E). Footprint icons indicate the front of the assembly.

Step 4: Assemble the Handle & Side Plates

Attach the handle components (J) and side plates (I) to the desk columns (H) using M6x30mm bolts (B) and the Allen key (E).

Visual description of Step 4: Depicts the handle components (J) and side plates (I) being affixed to the upper section of the desk columns (H) with bolts (B) and the Allen key (E). Arrows indicate the attachment points.

Step 5: Assemble Desktop

Place the desktop (G) onto the assembled frame. Secure the desktop using M5x12mm screws (C) and the Allen key (E).

Visual description of Step 5: Shows the desktop (G) being placed on the frame and fastened with screws (C) and the Allen key (E). The headphone hook (M) and cup holder (N) are also shown being attached.

Function Display

The desk features a pneumatic height adjustment mechanism. Press and hold the button to lift or lower the desk.

The desk includes an integrated Cup Holder (N) and a Headphone Hook (M).

The casters are lockable for stability.

Visual description of Function Display: An illustration shows the desk with callouts for the Cup Holder, Headphone Hook, and Lockable Caster. A close-up shows the height adjustment button and indicates the up/down movement.

WARNING: Tip: Adjust casters to level off uneven tables when shaking.

Thank you for choosing this product.