Vieta Pro Orpheo VM-BS1000 QuickStart Guide
Guía rápida
What's In The Box
Contents include:
- Safety & Warranty information (1x)
- Quickstart Guide (1x)
- Speaker (1x)
- USB-C Charging Cable (1x)
- Carrying Strap (1x)
Inputs
Connection ports:
- 1. AUX IN 3.5 MM: For connecting audio sources via a 3.5mm cable.
- 2. USB-A INPUT: For playing audio from a USB drive.
- 3. USB-C CHARGING INPUT: For charging the speaker.
A charger is required (not included).
Power On/Off
To turn the speaker on or off, press and hold the power button [power icon].
The RGB LED will illuminate when the speaker is turned on.
Buttons
The speaker features multiple buttons for control. Functions are activated by short press, double press, or long press.
- Power / Play/Pause: Long press [power icon] for Power On/Off. Short press [play/pause icon] for Play/Pause.
- Volume Down: Short press [volume down icon] to decrease volume.
- Volume Up: Short press [volume up icon] to increase volume.
- Previous Track: Short press [previous track icon] to go to the previous track.
- Next Track: Short press [next track icon] to skip to the next track.
- Answer/End Call: Short press [call icon] to answer or end a call.
- Reject Call: Long press [call icon] to reject an incoming call.
- Voice Assistant: Double press [voice assistant icon] to activate your device's voice assistant.
- Mode Selection (Bluetooth/USB/AUX): Press to cycle input modes.
- TWS (True Wireless Stereo) On/Off: Long press [TWS icon] to activate or deactivate TWS mode for stereo pairing with another speaker.
- Disconnect Bluetooth: Long press [Bluetooth icon] to disconnect from the current Bluetooth device.
- Light Mode Switch: Short press [lightbulb icon] to cycle through LED light modes.
- Show Battery Level: Short press [battery icon] to check the current battery status.
- Turn Light Off/On: Long press [lightbulb icon] to turn the LED light on or off.
- Change EQ: Long press [EQ icon] to switch between Equalizer modes.
Bluetooth Mode & TWS
Pairing: Press the Bluetooth button [Bluetooth icon] to enter pairing mode. Select "Orpheo VM-BS1000" on your device.
TWS Mode: For stereo sound, power on two Orpheo speakers. On both speakers, long press the TWS button [TWS icon] simultaneously to pair them. They will then connect to your device as a stereo pair.
Stereo Mode: Indicates the speakers are paired in TWS mode.
Waterproof
The speaker has an IPX7 rating, meaning it can be submerged in water up to 1 meter for 30 minutes.
Important: Ensure all ports are sealed and cables are disconnected before exposing to water. Do not expose to water while charging.
Tech Specs
| Specification | Value |
|---|---|
| Power | 25 W |
| Bluetooth Version | 5.3 |
| Bluetooth Chipset | Jieli JL7016C |
| Supported Profiles | A2DP, AVRCP |
| Transmission Distance | 15 m |
| Frequency Response | 80 Hz - 20 kHz |
| Drivers | 2 x Ø50mm Full range + 1 x Passive radiator |
| Impedance | 4Ω |
| TWS (True Wireless Stereo) | Yes (2 units) |
| Water Resistance | IPX7 |
| Battery | Lithium 18650 7.4V 2000 mAh |
| Battery Life | 10 hours |
| Power Input | DC 5V 2A |
| Charging Port | USB Type C |
| Charging Time | 3.5 hours |
| Dimensions | 170.6 mm x 77.45 mm x 56.1 mm |
| Weight | 1040 g |
Battery Care: To prolong battery life, charge fully at least once every 3 months. Battery life may vary based on usage and environmental conditions. Ensure all cable connections are removed and the port cover is tightly closed before exposing the speaker to liquids. Do not expose the speaker to water while charging, as this may cause permanent damage.
