INSTALLATION
Remove transport bolts
Warning!
- You must remove the transport bolts from the backside before using the product.
Image showing a spanner loosening a transport bolt on the back of a washing machine.
Image showing transport bolts with rubber parts being removed and set aside.
Image showing cover caps being inserted into the holes left by the transport bolts.
Levelling the washing machine
Warning!
- The lock nuts on all four feet must be screwed tightly against the housing.
Diagram illustrating the adjustment of a washing machine foot, with arrows showing the direction to turn the foot and lock nut.
- Loosen the lock nut.
- Turn the foot until it reaches the floor.
- Adjust the legs and lock the nuts with a spanner. Make sure the machine is level and steady.
Connect the water supply hose
Warning!
- To prevent leakage or water damage, follow the instructions in this chapter
- Do not kink, crush or modify water inlet hose.
Diagram showing a water supply hose being connected to the washing machine's water inlet valve and a water tap.
Illustration indicating a cold water connection for the washing machine.
Note!
- Connect manually, do not use tools. Check if the connections are tight.
