Login • Instagram
Bot Verification
User Manual for BLACKVUE models including: Blackvue, DR750X-2CH
For manuals, customer support and FAQs go to www.blackvue.com ... For user safety and to avoid property damage, read through this manual and follow ... © 2020. DR750X-2CH instagram.com/BlackVueofficial. Headquarter. FCC ID: ...
Pittasoft Co., Ltd. CM100LTE Blackvue Connectivity Module YCK-CM100LTE YCKCM100LTE cm100lte
File Info : application/pdf, 36 Pages, 4.47MB
DocumentDocumentDR750X-2CH
ENGLISH
BLACKVUE
DR750X-2CH
For manuals, customer support and FAQs go to www.blackvue.com
Important safety information
For user safety and to avoid property damage, read through this manual and follow these safety instructions to use the product correctly. y Do not disassemble, repair, or modify the product yourself.
Doing so may cause fire, electric shock, or malfunction. For internal inspection and repair, contact the service center. y Do not adjust the product while driving. Doing so may cause an accident. Stop or park your car in a safe place before installing and setting up the product. y Do not operate the product with wet hands. Doing so may cause electric shock. y If any foreign matter gets inside the product, detach the power cord immediately. Contact the service center for repair. y Do not cover the product with any material. Doing so may cause external deformation of the product or fire. Use the product and peripherals in a well-ventilated location. y If the product is used outside the optimal temperature range (-20°C - 85°C / -4°F - 185°F), performance can decline or malfunctions may occur. y When entering or exiting a tunnel, when directly facing into bright sunlight, or when recording at night without lighting the quality of recorded video may deteriorate. y If the product is damaged or the power supply is cut due to an accident, video may not be recorded. y Do not remove the microSD card while the microSD card is saving or reading data. y The data can be damaged or malfunctions may occur.
DR750X-2CH 2
FCC Compliance Information
This equipment has been tested and found to comply with the limits for a Class B digital device, pursuant to Part 15 of the FCC Rules. These limits are designed to provide reasonable protections against harmful interference in a residential installation.
This equipment generates, uses and can radiate radio frequency energy and, if not installed and used in accordance with the instructions, may cause harmful interference to radio communications. However, there is no guarantee that interference will not occur in a particular installation.
If this equipment does cause harmful interference to radio or television reception which can be determined by turning the equipment off and on, the user is encouraged to ty to correct the interference by one or more of the following measures. y Reorient or relocate the receiving antenna. y Increase the separation between the equipment and receiver. y Connect the equipment into an outlet on a circuit different from that to which the
receiver is connected. y Consult the dealer or an experienced radio, TV technician for help. y Only shielded interface cable should be used. Finally, any changes or modifications to the equipment by the user not expressly approved by the grantee or manufacture could void the user's authority to operate such equipment.
This device complies with Part 15 of the FCC Rules. Operation is subject to the following two conditions: (1) This device may not cause harmful interference, and (2) This device must accept any interference received, including interference that may
cause undesired operation of this device. FCC RF Radiation Exposure Statement: This equipment complies with FCC RF Radiation exposure limits set forth for an uncontrolled environment. This device and its antenna must not be co-located or operating in conjunction with any other antenna or transmitter. This equipment should be installed and operated with a minimum distance of 20 cm between the radiator and your body. FCC ID: YCK-DR750X-2CH
3 BLACKVUE
CAUTION Any changed or modifications in construction of this device which are not expressly approved by the party responsible for compliance could void the user's authority to operate the equipment.
There is a risk of explosion if the battery is replaced by an incorrect type. Dispose of used batteries according to the instructions.
CE WARNING y Changes and modifications not expressly approved by the party responsible for
compliance could void the user's authority to operate the equipment. y It is desirable that it be installed and operated with at least 20cm or more between
the radiator and a person's body (excluding extremities: hand, wrists, feet, and ankles).
Disposal of your BlackVue dashcam
1. All electrical and electronic products should be disposed of separately from the municipal waste stream via designated collection facilities appointed by the government or the local authorities. Contact local authorities to learn about disposal and recycling options available in your area.
2. The correct disposal of your BlackVue dashcam will help prevent potential negative consequences for the environment and human health.
3. For more detailed information about disposal of your BlackVue dashcam, please contact your city office, waste disposal service or the shop where you purchased the product.
DR750X-2CH 4
ICC Compliance This Class [B] digital apparatus complies with Canadian ICES-003.
This radio transmitter has been approved by Industry Canada to operate with the antenna types listed below with the maximum permissible gain and required antenna impedance for each antenna type indicated. Antenna types not included in this list, having a gain greater than the maximum gain indicated for that type, are strictly prohibited for use with this device.
- IC Warning This device complies with Industry Canada licence-exempt RSS standard(s).
Operation is subject to the following two conditions: (1) this device may not cause interference, and (2) this device must accept any interference, including interference that may cause
undesired operation of the device.
Le présent appareil est conforme aux CNR d'Industrie Canada applicable aux appreils radio exempts de license.
L'exploitation est autoriséee aux deux conditions suivantes: (1) l'appareil ne doit pas produire de brouillage, et (2) l 'utilisateur de l'appareil doit accepter tout brouillage radioélectrique subi, méme si
le brouillage est susceptible d'encompromettre le fonctionnement.
5 BLACKVUE
ENGLISH
In the box
Check the box for each of the following items before installing the BlackVue dashcam.
Front camera
Quick start guide
Cigarette lighter power cable
Double-sided tape for the Mounting
Brackets
microSD Card
Rear camera
Pry tool
Hardwiring power cable
Cable clips (8 EA)
microSD card reader
Rear camera connection cable
Need help? Download the manual (including FAQs) and the latest firmware from www.blackvue.com Or contact a Customer Support expert at cs@pittasoft.com
DR750X-2CH 6
At a glance
The following diagrams explain each part of the BlackVue dashcam.
Front camera
118.5 mm
Lock button
Camera lens
55 mm
36 mm
Mounting bracket
Front security LED : Lights on during (i) normal mode, (ii) an event is being recorded (impact detected), (iii) manual recording has started, or (iv) motion is detected in parking mode.
: Blinks slowly during parking mode motion detection standby.
7 BLACKVUE
ENGLISH
GPS/BT LED : Lights blue when (i) GPS is on, and/or (ii) Bluetooth is paired. : Blinks blue slowly when bluetooth is in pairing mode. : Blinks blue quickly when (i) GPS is turning off, and/or (ii) Bluetooth is turning off.
Speaker
LTE/Wi-Fi LED : Lights yellow when LTE is connected. : Lights white when Wi-Fi is connected. : Blinks white slowly when connecting to Wi-Fi. : Blinks white quickly when Wi-Fi is turning off.
Recording LED : Lights orange in normal mode. : Lights red when (i) an event is being recorded (impact detected), or (ii) manual recording has started. : Lights green in parking mode when motion is detected.
Connectivity details label: - Default Wi-Fi SSID - Default Wi-Fi password - Cloud code - QR code
Serial number label
DR750X-2CH 8
Proximity Sensor LED : Lights when proximity sensor is triggered.
Proximity Sensor: Touch or wave a finger within 20mm of the sensor to trigger a customizable function.
Available options: - Turn on/off audio recording (default) - Manual recording trigger - Off
Rear camera connection port
Micro USB port DC in (power connector)
microSD card slot
Cover
Wi-Fi button: - Press once to turn on/off Wi-Fi.
9 BLACKVUE
ENGLISH 25 mm
Rear camera
Mounting bracket
Camera lens
31 mm
V out (Front camera connection port)
67.4 mm
Rear security LED : Stays on in all recordings modes but can be turned off from firmware settings.
DR750X-2CH 10
STEP 1 Install and power up
Install the front camera behind the rear view mirror. Install the rear camera at the top of the back windshield. Remove any foreign matter and clean and dry the windshield before installation.
Warning y Do not install the product in a location where it can obstruct the driver's field
of vision. Turn off the engine. Open the cover of the microSD card slot, gently push the card into the slot until it locks into place and close the cover.
Peel off the protective film from the double-sided tape and attach the front camera to the windshield behind the rear-view mirror.
11 BLACKVUE
ENGLISH
Adjust the angle of the lens by rotating the body of the front camera. We recommend pointing the lens slightly downwards (10° below horizontal), so as to record video with a 6:4 road to background ratio.
Peel off the protective film from the double-sided tape and attach the rear camera to the rear windshield. Adjust the angle of the lens by rotating the body of the rear camera.
Connect the front camera ('Rear' port) and the rear camera ('V out') using the rear camera connection cable.
Use the pry tool to lift the edges of the rubber window sealing and molding and tuck in the rear camera connection cable.
Rear camera connection cable
DR750X-2CH 12
Connectivity Module (Optional): Connect the connectivity module to the front camera and attach it to the edge of the window. Use the pry tool to tuck in the cable.
Plug the cigarette lighter power cable into the cigarette lighter socket and the front camera. Skip to for Hardwiring Power Cable setup.
Use the pry tool to lift the edges of the windshield trim/molding and tuck in the power cord.
Rear camera connection cable
Power cord
Turn on the engine. The BlackVue dashcam will power up and start recording. Video files are stored on the microSD card.
Turn off the engine. The dashcam will automatically stop recording and power down. To record in parking mode while the engine is off please connect the Hardwiring Power Cable (included in the box) or install a Power Magic Battery Pack (sold separately). A Hardwiring Power Cable uses the automotive battery to power your dashcam when the engine is off. A low voltage power cut-off function and a parking mode timer to protect the automotive battery from discharge is installed in the device. Settings can be changed in the BlackVue App or Viewer. Locate the fuse box to connect the hardwiring power cable.
Note y Location of the fuse box differ by manufacturer or model. For details, refer to
the vehicle owner's manual.
13 BLACKVUE
ENGLISH
- 1 After removing fuse panel cover, find a fuse that powers on when engine
is turned on(ex.cigarette lighter socket, audio, etc) and another fuse that remains powered on after the engine is turned off (ex.hazard light, interior light). Connect the ACC+ cable to a fuse that powers on after engine start, and BATT+ cable to a fuse that remains powered on after engine is turned off.
Note y To use battery saver feature, connect the BATT+ cable to the hazard light
fuse. Functions of fuse differ by manufacturer or model. For details refer to the vehicle owner's manual.
- 2 Connect the GND cable to metal ground bolt.
M Connect the power cable to the DC in terminal of the front camera. BlackVue
will power up and start recording. Video files are stored on the microSD card. Note y When you run the dashcam for the first time the firmware is automatically
loaded onto the microSD card. After the firmware has been loaded onto the microSD card you can customize settings using BlackVue Viewer on a computer.
DR750X-2CH 14
STEP 2 Playback Playing video files on your smartphone (Android/iOS)
Search for the BlackVue app in the Google Play Store or Apple App Store and install it on your smartphone. "Pair" your smartphone with the BlackVue dashcam via direct Wi-Fi: (i) Press the Wi-Fi button once to turn on Wi-Fi. (ii) Go to your smartphone's Settings then select Wi-Fi, and make sure Wi-Fi is
turned on.
(iii) Choose your BlackVue dashcam from the network list. The dashcam's default SSID begins with its model number (e.g. BlackVue750X-******).
(iv) Enter the password and tap join. * To find the default Wi-Fi password, unplug the cables and remove the front camera from its mount. The default Wi-Fi SSID, password and cloud code are printed on the dashcam's connectivity details label.
15 BLACKVUE
ENGLISH
(v) Open the BlackVue app and select WI-FI.
Select the video file you want to play from the video list. Note y Direct Wi-Fi lets you connect your smartphone to your dashcam via Wi-Fi
within a range of 10m. y For quick playback and download of the recordings, you can select the "Quick
play file" option from App settings. y All image shown are for illustration purposes only. Actual App may differ from
images shown.
DR750X-2CH 16
Playing video files on your computer (Windows/macOS)
Remove the microSD card from the dashcam.
Open side cover
To remove
Insert the card into the microSD card reader and connect it to a computer.
Download BlackVue Viewer program from www.blackvue.com > Support > Downloads and install it on your computer.
17 BLACKVUE
ENGLISH
Run BlackVue Viewer. To play, select a video and click on the play button or double click the selected video.
Windows/macOS Viewer Note y All images shown are for illustration purpose only. Actual program may differ
from images shown.
DR750X-2CH 18
STEP 3 Changing dashcam's time zone, Wi-Fi password and other settings.
The dashcam's time zone is initially set to (GMT-11). To display the correct time please select your time zone.
Using your smartphone (Android/iOS) "Pair" your smartphone with the BlackVue dashcam via direct Wi-Fi (for details see STEP 2 `Playing video files on your smartphone'). Open the BlackVue app and select WI-FI. Tap the button to access the Firmware settings menu.
(i) Select Firmware settings > Basic > Time. (ii) Select your time zone to auto-sync with GPS time or you can set the time and
date manually after enabling Manual time setting.
19 BLACKVUE
ENGLISH
Go back to the Firmware settings menu and configure other desired settings. Settings that can be changed include Wi-Fi SSID & password, image quality, sensitivity settings, voice recording on/off, speed unit (km/h, MPH, off), LEDs on/ off, voice guidance volume, Cloud settings etc. Once settings are configured, tap and tap Save.
DR750X-2CH 20
Changing the dashcam's time zone and other firmware settings on your computer (Windows/macOS) Run BlackVue Viewer program after connecting dashcam's microSD card to your computer. Click on the button to open the BlackVue settings panel.
Settings
Settings that can be changed include Wi-Fi SSID & password, image quality, sensitivity settings, voice recording on/off, speed unit (km/h, MPH, off ), LEDs on/off, voice guidance volume, Cloud settings etc. For more information about changing the settings in BlackVue Viewer, please download the manual from www.blackvue.com > Support > Downloads.
21 BLACKVUE
ENGLISH
STEP 4 Connect to BLACKVUE CLOUD (optional)
If you don't have a mobile Wi-Fi hotspot, Blackvue connectivity module or if you don't want to use the BLACKVUE CLOUD service, you can skip this step. If you have a mobile Wi-Fi hotspot (also known as a portable Wi-Fi router), BlackVue connectivity module (CM100LTE), a car-embedded wireless internet network or a Wi-Fi network near your car, you can use the BlackVue app to connect to BLACKVUE CLOUD and see in real-time where your car is and the dashcam's live video feed. For more information about using the BlackVue app, please download the Cloud Manual from www.blackvue.com > Support > Downloads.
Create an account (i) Open the BlackVue app. (ii) Tap the button in the top-left corner and select Create account. (iii) Enter your name, e-mail address and choose a password. Re-enter your
password and press Sign up. (iv) You will receive an e-mail. Click the link in the email to finish creating your
account. Register your dashcam with your account (i) In the BlackVue app select CLOUD and login to your account. (ii) Tap Yes to enable push notifications (this setting can be adjusted at any time
later). (iii) Select Register new camera. (iv) Register your camera using one of the following methods:
DR750X-2CH 22
QR Code: Press Scan QR Code and line up the QR Code on your smartphone's screen.
QR code / Cloud code / Serial number
or Manual registration: Enter your camera's Serial number and Cloud code and press Register. Connect your BlackVue dashcam to a Wi-Fi hotspot for Cloud connectivity (i) Make sure your BlackVue dashcam and mobile Wi-Fi hotspot are on. (ii) "Pair" your smartphone with the BlackVue dashcam via direct Wi-Fi (for
details see STEP 2 `Playing video files on your smartphone') (iii) Open the BlackVue app. Select WI-FI > > Firmware settings > CLOUD.
23 BLACKVUE
ENGLISH
(iv) Ensure Enable Cloud service is on. Select Cloud service hotspot settings. (v) Choose your Wi-Fi hotspot from the list. Enter the password and tap OK.
Note y Up to 3 Wi-Fi hotspot SSIDs can be saved (e.g. home, portable hotspot and
work). y The BlackVue DR750X dashcam is not compatible with 5GHz wireless
networks.
DR750X-2CH 24
(vi) Go back to the Firmware settings menu, tap and tap Save.
After rebooting, your dashcam will automatically establish internet connection. If internet connection was not established, please ensure Wi-Fi information was inserted correctly. Select CLOUD from the main screen to access all of the Cloud features. Note y If LTE and Wi-Fi hotspot is available for internet connection, Wi-Fi hotspot will
be in priority. If LTE connection is preferred at all times, please remove Wi-Fi hotspot information. Connect your BlackVue dashcam to Cloud connectivity (Using CM100LTE) Make sure your BlackVue dashcam and connectivity module is connected. Then, follow the below steps for SIM registration. (i) Locate the SIM card slot. Unscrew the bolt from SIM slot cover. Then, unmount the SIM slot by using a SIM eject tool. Insert SIM in the SIM slot. Mount the SIM slot back in the connectivity module, then, screw the bolt to hold SIM slot cover. (ii) "Pair" your smartphone with the BlackVue dashcam via direct Wi-Fi. (iii) Open the BlackVue app and select WI-FI > . 25 BLACKVUE
ENGLISH
SIM card activation
(iv) Configure the APN settings to activate the SIM card. For detailed information, please check "SIM activation guide" in the packaging box or visit BlackVue Help Center: www.helpcenter.blackvue.com -> LTE connectivity guide.
(v) Once your dashcam is connected to the internet, you can go to the CLOUD menu to use BlackVue Cloud features.
Note y For full details, refer to the "SIM activation guide" that is included in the
CM100LTE package. y To use the BlackVue Cloud Service, SIM card must be properly activated for
Internet access via LTE network. y When the dashcam is connected to internet, you can use BlackVue Cloud
features such as remote Live View and Video playback, Real-time location, push notification, Auto-upload, remote Firmware update etc. on BlackVue app and PC Viewer. y Some Cloud features may not work when surrounding temperature is high or/ and LTE speed is slow. y For more information about using the BlackVue app, please download the Cloud Manual from www.blackvue.com > Support > Downloads.
DR750X-2CH 26
Tips for optimal performance
For stable operation of the dashcam, it is recommended to format the microSD card once a month.
Format using BlackVue Viewer (Windows): Download BlackVue Windows Viewer from www.blackvue.com > Support > Downloads and install it on your computer. Insert the microSD card into the microSD card reader and connect the reader to your computer. Launch the copy of BlackVue Viewer that is installed on your computer. Click the Format button, select the card drive and click OK.
Format using BlackVue Viewer (macOS): Download BlackVue Mac Viewer from www.blackvue.com > Support > Downloads and install it on your computer. Insert the microSD card into the microSD card reader and connect the reader to your computer. Launch the copy of BlackVue Viewer that is installed on your computer. Click the Format button and select the microSD card from the list of drives in the left frame. After selecting your microSD card select the Erase tab in the main window. Select "MS-DOS (FAT)" from the Volume Format drop-down menu and click Erase.
Only use official BlackVue microSD cards. Other cards may have compatibility issues.
Regularly upgrade the firmware for performance improvements and updated features. Firmware updates will be made available for download at www.blackvue.com > Support > Downloads.
Customer Support For customer support, manuals and firmware updates please visit www.blackvue.com You can also email a Customer Support expert at cs@pittasoft.com
27 BLACKVUE
ENGLISH
Product specifications:
Model Name DR750X-2CH
Color/Size/Weight
Front: Black / Width 118.5 mm x Height 36 mm / 105 g Rear: Black / Width 67.4 mm x Height 25 mm / 25 g
Memory
microSD Card (32 GB / 64 GB / 128 GB / 256 GB)
Recording Modes
Normal recording, Event recording (when impact is detected in normal and parking mode), Manual recording and Parking recording (when motion is detected) * When using Hardwiring Power Cable, ACC+ will trigger
parking mode. When using other methods, G-sensor will trigger parking mode.
Camera
Front: STARVISTM CMOS Sensor (Approx. 2.1 M Pixel) Rear: STARVISTM CMOS Sensor (Approx. 2.1 M Pixel)
Viewing Angle
Front: Diagonal 139°, Horizontal 116°, Vertical 61° Rear: Diagonal 139°, Horizontal 116°, Vertical 61°
Resolution/ Frame Rate
<Front - Rear> Full HD @60fps - Full HD @30fps * Frame rate may vary during Wi-Fi streaming.
Image Quality Highest (Extreme), Highest, High, Normal
Video Compression Mode
MP4
Wi-Fi
Built-in (802.11 b.g.n)
GPS
Built-in (Dual Band : GPS, GLONASS)
Bluetooth
Built-in (V2.1+EDR/4.2)
LTE
External
Microphone Built-in
DR750X-2CH 28
Speaker (Voice Guidance)
Built-in
LED Indicators
Front: Recording LED, GPS/BT LED, LTE/Wi-Fi LED, Front Security LED, Proximity Sensing indicator LED Rear: Rear Security LED
Button
Wi-Fi button: * Press once to turn on/off Wi-Fi. Proximity sensor: Touching the proximity sensor turns on/off audio recording or triggers manual recording depending on the firmware settings.
Sensor
3-Axis Acceleration Sensor
Backup Battery Built-in super capacitor
Input Power
DC 12V-24V (DC Plug (Ø3.5 x Ø1.35)) to Wires (Black: GND / Yellow: B+ / Red: ACC)
Normal Mode (WiFi On / GPS On / 2CH) : 375mA / hour
Normal Mode (WiFi Off / GPS On / 2CH) : 340mA / hour
Power Consumption
Parking Mode (WiFi On / GPS Off / 2CH) : 320mA / hour Parking Mode (WiFi Off / GPS Off / 2CH) : 285mA / hour
* Actual power consumption may vary depending on use
conditions and environment.
Operation Temperature
-20 °C - 85 °C (-4 °F - 185 °F)
Storage Temperature
-20 °C - 90 °C (-4 °F - 194 °F )
High Temperature Cut-Off
Approx. 85 °C (185 °F)
Certifications
Front: FCC, CE, RoHS, Telec, WEEE, IC Rear: FCC, CE, RoHS, WEEE
29 BLACKVUE
ENGLISH
Software
BlackVue Viewer * Windows 7 or higher and Mac Yosemite OS X (10.10) or higher
Application Others
BlackVue Application (Android 5.0 or higher, iOS 9.0 or higher)
Adaptive Format Free File Management System
* STARVIS is a trademark of Sony Corporation.
DR750X-2CH 30
Product specifications :
Model Name Product Name LTE Module
LTE Supported Band
CM100LTE Blackvue Connectivity Module Quectel EC25-A EC25-A : B2/B4/B12
LTE Features
Support up to Non-CA CAT. 4 FDD LTE-FDD : Max 150Mbps(DL) / Max 50Mbps(UL)
Transmitting Power USIM Interface USB Interface Connector Type
Antenna Type
Power Supply Power Consumption Temperature Range
Class 3 : 23dBm +/-2dBm @ LTE-FDD Bands Class 3 : 24dBm +1/-3dBM @ WCDMA Bands
Support USIM Nano Card / 3.0V
Compliant with USB 2.0 specification(Slave Only), Reach up to 480Mbps for data transfer rate
Micro USB Type-B
Built-in (Main, Diversity) / Antenna Gain - Band12(699~746MHz) : 0dBi - Band2(1710~1990MHz) : -1.5dBi - Band4(2110~2155MHz) : 0dBi USB Harness Cable : 1.5m Typical Supply Voltage : 5.0V / 1A Supply Input Voltage : 3.3V ~ 5.5V / Max. Current : 2A
Idle Mode : 20mA / Traffic Mode : 570mA @ Max. 23dBm
Operation Temperature Range : -35°C ~ +75°C
Extended Temperature Range : -40°C ~ +85°C
Storage Temperature Range : -40°C ~ +90°C
Color/Size/Weight Black / Length 90 mm x Width 60 mm x Height 4.5 mm / 74g Compatible Devices DR750X-1CH, DR750X-2CH, DR900X-1CH, DR900X-2CH
Certifications
PTCRB, FCC, ISED, RCM, TELEC, WEEE, RoHS
Product Warranty
The term of this product warranty is 1 year from the purchase date. (Accessories such as an External Battery/ microSD Card: 6 Months) We, PittaSoft Co., Ltd., provide the product warranty according to the Consumer Dispute Settlement Regulations (drawn
up by the Fair Trade Commission). PittaSoft or designated partners will provide the warranty service upon request.
Circumstances
Warranty
Within the Outside of the
Term
Term
For serious repair required within 10 days of purchase
Exchange/ Refund
For serious repair required within 1 month of purchase
For serious repair required within 1 month of exchange
When not exchangeable
Exchange N/A
Exchange/ Refund
Refund
For performance/
functional
Repair
problems under (If Available)
normal use
conditions
For Defect
Repeated problem with the same defect (up to 3 times)
Repeated trouble with different parts (up to 5 times)
Free Repair
Repair (If Unavailable)
For the loss of a product while being serviced/repaired
When repair is unavailable due to lack of spare parts within the component holding period
Exchange/ Refund
When repair is unavailable even when spare parts are available
1) Malfunction due to customer fault - Malfunction & damage caused by user negligence (fall, shock, damage, unreasonable operation, etc.) or careless use - Malfunction & damage after being serviced/repaired by an unauthorized third party, and not through Pittasoft's Authorized Service Center. - Malfunction & damage due to the use of unauthorized components, consumables, or separately sold parts
2) Other Cases - Malfunction due to natural disasters (fire, flood, earthquake, etc.) - Expired life span of a consumable part - Malfunction due to external reasons
Paid Repair
Paid Repair/ Paid Product
Exchange
Refund after depreciation
plus an additional 10%
(Maximum: purchase price)
Exchange/ Refund after depreciation
Paid Repair
This warranty is only valid in the country where you purchased the product.
Notes
Notes
FCC ID: YCK-DR750X-2CH / HVIN : DR750X-2CH
Headquarter Service Center
DR750X-2CH
Pittasoft 4F, 331, Pangyo-ro, Bundang-gu, Seongnam-si, Gyeonggi-do, Republic of Korea, 13488
instagram.com/BlackVueofficial ©2020