OXVA XLIM CLASSIC EDITION User Manual
Brand: OXVA
Product Overview
The OXVA XLIM CLASSIC EDITION is a user-friendly vaping device designed for a satisfying experience. This manual provides essential information for its operation and maintenance.
Device Components
The device features:
- Display Screen: Shows battery level, wattage, and puff count.
- Power Button: Used for turning the device on/off and firing.
- Airflow Control: Located on the side to adjust vapor intake.
- Cartridge: Houses the e-liquid and coil.
- USB-C Port: For charging the device.
Specifications
General Specifications
Output Power: | 5-25W |
Cartridge Capacity: | 2ml |
Battery Capacity: | 900mAh |
Charging: | Type-C, 5V/1A |
Material: | Aluminum Alloy + PCTG |
Dimensions: | 24x14x111mm |
Weight: | 47g |
Coil Specifications
Resistance: | 0.6Ω (20-25W) / 0.8Ω (12-16W) / 1.2Ω (9-11W) |
Operation Instructions
Getting Started
- Install the cartridge onto the device.
- Ensure the battery is charged.
- Fill the cartridge with e-liquid, avoiding the central airflow hole.
- Wait 5 minutes for the coil to saturate.
- Press the power button 5 times to turn the device on/off.
- Press the power button to vape.
Adjusting Airflow
Slide the airflow control switch on the side of the device to customize your draw.
Charging
Connect the USB-C cable to the charging port and a power source. The battery icon on the screen will indicate charging status.
Maintenance and Care
- Clean the device regularly with a dry cloth.
- Replace the cartridge when the flavor diminishes or the coil is burnt.
- Avoid exposing the device to extreme temperatures or moisture.
Safety Information
- This product is not intended for use by persons under the age of 18.
- Keep out of reach of children and pets.
- Do not use if pregnant or breastfeeding.
- Consult a physician before use if you have a pre-existing medical condition.
- Do not disassemble or attempt to repair the device yourself.
- Use only approved charging cables and power adapters.
Troubleshooting
- No vapor: Check battery charge, ensure cartridge is properly installed, and check e-liquid level.
- Leaking: Ensure cartridge is not overfilled and is properly seated. Check for cracks in the cartridge.
- Weak vapor: Ensure battery is charged and coil is properly saturated.
Warranty Information
Please refer to the separate warranty card for details on the product warranty.
Certifications
The device complies with relevant safety and electromagnetic compatibility standards, indicated by CE and FC markings.