GIGABYTE BRIX Ultra Compact PC Kit

Introduction

This document provides a quick start guide for the GIGABYTE BRIX Ultra Compact PC Kit, including installation precautions, product specifications, package contents, system appearance, hardware installation, and BIOS setup.

The GIGABYTE BRIX is an ultra-compact PC kit designed for versatility and performance.

Support Information

For warranty information, tested memory lists, drivers, BIOS updates, and product support, please visit the official GIGABYTE support website:

https://www.gigabyte.com/support-downloads/customer-service

You can find lists of tested memory, M.2 SSDs, wireless adapters, and supported operating systems, as well as download the latest drivers and BIOS updates, and access product support resources on the GIGABYTE website.

Safety and Regulatory Information

General Safety Precautions:

• This product must be grounded. Ensure the power cord's plug is connected to a grounded outlet.
• Risk of explosion if the battery is replaced with an incorrect type. Batteries should be recycled. Dispose of used batteries according to local environmental regulations.
• Before opening the chassis to exchange an internal component, power off the device and let it cool down for at least 10 minutes.
• Failure to use the included Model GB-BR Power Adapter may violate regulatory compliance and expose the user to safety hazards.
• If a battery is swallowed, it can cause severe or fatal internal chemical burns within 2 hours. Keep batteries out of reach of children. Seek immediate medical attention if a battery is suspected to be swallowed.
• Do not force discharge, recharge, disassemble, heat, or incinerate batteries.
• The product contains non-replaceable batteries.

Regulatory Compliance:

• This device complies with Part 15 of the FCC Rules.
• HDMI and the HDMI Logo are trademarks of HDMI Licensing LLC.
• The product complies with RoHS standards.

Environmental Considerations:

• At the end of its serviceable life, this product should not be treated as household waste. It should be handed over to an applicable collection point for recycling of electrical and electronic equipment.

Conventions Used

The following conventions are used in this guide:

• NOTE! ? Gives additional information related to the current topic.
• CAUTION! ⚠️ Gives precautionary measures to avoid possible hardware or software problems.
• WARNING! ❗ Alerts you to any damage that might result from specific actions.
• ? Languages: This icon indicates the text is translated to different languages.

Chapter 1: System Information

1-1 Installation Precautions

The system contains delicate electronic circuits and components that can be damaged by electrostatic discharge (ESD). Follow these precautions:

• Do not remove or break motherboard S/N or warranty stickers.
• Always disconnect the AC power cord before installing or removing components.
• Ensure hardware components are connected tightly and securely.
• Avoid touching metal leads or connectors when handling the motherboard.
• Use an ESD wrist strap or touch a metal object to eliminate static electricity before handling components.
• Place the motherboard on an antistatic pad or in a shielding container before installation.
• Ensure the power supply is turned off and voltage is set correctly before connecting.
• Verify all cables and power connectors are properly connected.
• Prevent screws from contacting motherboard circuits.
• Ensure no leftover screws or metal components are inside the casing.
• Do not place the system on uneven surfaces or in high-temperature environments.
• Turning on power during installation can damage components or cause injury.
• Consult a certified technician if uncertain about installation steps.

1-2 Product Specifications

System Dimension: 112.6 x 119.4 x 34.4 mm, 0.5 L. Motherboard size: 105 x 114.49 mm.

CPU:

• GB-BRU7-255H: Intel® Core™ Ultra 7 Processor 255H (16C, 6P+8E+2LPE, 28W)
• GB-BRU5-225H: Intel® Core™ Ultra 5 Processor 225H (14C, 4P+8E+2LPE, 28W)

NPU: Intel® AI Boost NPU up to 13 TOPS

Memory: 2 x SO-DIMM DDR5 slots (5600MHz, Max. 96GB) or 2 x CSO-DIMM DDR5 slots (6400MHz, Max. 96GB)

LAN: 2.5GbE LAN (Intel® I226V)

Graphics:

• GB-BRU7-255H: Intel® Arc™ 140T GPU
• GB-BRU5-225H: Intel® Arc™ 130T GPU

(Intel® Arc™ Graphics requires using 2 x SO-DIMM / CSO-DIMM dual channel memory)

WiFi Card: RTL8922AE, Wi-Fi 7; 802.11 a/b/g/n/ac WLAN 2T2R with Bluetooth 5.2

Audio: Realtek ALC245

Expansion Slots:

• 1 x M.2 2280 slot for SSD (PCIe Gen 4x4) (PCIe Gen 5x4, ready design)
• 1 x M.2 2280 slot for SSD (PCIe Gen 4x4 + SATA)
• 1 x M.2 2230 slot for WiFi + Bluetooth card

HDMI Resolution (Max.): HDMI 2.1, Support 4K@60P HDR10

VESA: Mounting Hole, Supports 75 x 75 and 100 x 100 mm

Front I/O: 1 x Headset, 2 x USB 3.2 Gen2 Type A, 1 x USB 3.2 Gen2 Type C (Alt)

Rear I/O: 2 x HDMI (TMDS &CEC), 1 x USB4, 1 x USB 3.2 Gen2 Type C (PD IN), 1 x USB 3.2 Gen2 Type A, 1 x USB 2.0 Type A, 1 x RJ45

Left I/O: 1 x Kensington lock slot

Power Supply: Input: AC 100-240V, Output: DC 20V/5A, 100W (Type-C PD)

Support OS: Win11 64 bits

Environment: Operating Temperature 0°C to 35°C, Storage Temperature -20°C to +60°C

1-3 Package Contents

The package typically includes the GB-BR Bare-bone unit. It does NOT include M.2 (2280) or SO-DIMM/CSO-DIMM memory.

• 1-3-1 GB-BR Bare-bone: The main PC unit.
• 1-3-2 100W Adapter & Power Cord (20 Vdc, 5.0A): The included power adapter and cord. Use only with this product.
• 1-3-3 Quick Start Guide: This document.
• 1-3-4 VESA Mount Bracket & 6 x Screws: For mounting the unit.
• 1-3-5 Wire Clamp Screw: For cable management.
• 1-3-6 DDR PAD: Thermal pad for DDR memory.

Chapter 2: System Appearance

2-1 Top View

Diagram shows the top of the BRIX unit.

• 1. Power Button

2-2 Front View

Diagram shows the front panel of the BRIX unit.

• 2. Headset Jack
• 3. USB 3.2 Gen2 Type A (10Gbps)(5V/0.9A)
• 4. USB 3.2 Gen2 Type C (10Gbps)(5V/2.7A)

2-3 Rear View

Diagram shows the rear panel of the BRIX unit.

• 5. RJ-45 (10/100/1000/2500Mbps)
• 6. HDMI 2.1 (4K@60Hz*2)
• 7. USB 2.0 Type A (480Mbps)(5V/0.5A)
• 8. USB4 (40Gbps)(5V/3A)
• 9. PD IN (Power Input) (20V/5A)
• 10. USB 3.2 Gen2 Type A (10Gbps)(5V/0.9A)

2-4 Left View

Diagram shows the left side of the BRIX unit.

• 11. Vent Hole
• 12. Kensington Lock Slot

2-5 Right View

Diagram shows the right side of the BRIX unit.

• 11. Vent Hole
• 13. Wire Clamp Screw Hole

2-6 Bottom View

Diagram shows the bottom of the BRIX unit.

• 14. VESA Screw Hole

2-7 PIN Definition

Diagram shows internal connectors.

• A: Wi-Fi Connector
• B: M.2 M Key 2280 SSD slot (PCIe 4.0 x4 or SATA)
• C: M.2 M Key 2280 SSD slot (PCIe 4.0 x4) (PCIe 5.0 x4, ready design)
• D: DDR SO-DIMM/CSO-DIMM slots

NOTE! Wireless module inclusion may vary based on local distribution.

Chapter 3: System Hardware Installation

Pre-installation Instructions

⚠️ WARNING! Computer components can be damaged by electrostatic discharge (ESD). Working on powered computers is dangerous. Follow these guidelines:

• Always disconnect the computer from the power outlet before working inside the case.
• Wear a grounded wrist strap or discharge static electricity by touching a metal object.
• Hold circuit boards by the edges only. Do not touch components.
• Keep components in their static-proof packaging until ready for installation.

3-1 Removing the Bottom Cover

⚠️ Before you remove the bottom cover: Make sure the system is not turned on or connected to AC power.

To remove the bottom cover:

1. Unscrew and remove the bottom cover from the system.
2. Reinstall the bottom cover to the system.

3-2 Installing the M.2 SSD

⚠️ WARNING! Failure to properly turn off the system before installing components may cause serious damage.

To Install the M.2 SSD:

1. Carefully insert the M.2 SSD into the slot.
2. Push down until the M.2 SSD clicks into place.
3. Ensure the M.2 clip is properly secured to the M.2 SSD.

NOTE! Illustrations are for reference only. Follow the steps for your purchased product.

3-3 Installing the Memory

Before installing memory:

• Ensure the system supports the memory. Using memory of the same capacity, brand, speed, and chips is recommended.
• Always turn off the computer and unplug the power cord before installing memory.
• Memory modules can only be installed in one direction.

To Install Memory (SO-DIMM/CSO-DIMM DDR5):

1. When using DDR specifications requiring it, apply the DDR PAD to the motherboard.
2. Carefully insert SO-DIMM/CSO-DIMM memory modules.
3. Push down until the modules click into place.

NOTE! For DDR5 5600 specifications with 48GB and above, apply the DDR PAD.

3-4 Remove the Wireless Module

To remove the WiFi Module:

1. Disconnect the two antennas by lifting off the clips.
2. Remove the screw in the middle.
3. Carefully pull the wireless module from the slot.

Chapter 4: BIOS Setup

4-1 USB Power On Function

This feature allows the device to power on via USB, useful when mounted behind a display.

To enable USB Power On:

1. Press "Del" during device startup to enter BIOS.
2. Select "Chipset" from the menu.
3. Configure "USB S5 Wakeup Support" to "Enable".
4. Press F4 to Save and Exit.