Orchard Pro Grafting and Pruning Tool

Package Contents

• Storage bag
• Grafting and pruning tool
• 2 replacement grafting blades
• Wrench
• Phillips head screwdriver

Technical Specifications

• Size: 9.5 × 21 cm
• Material: High carbon steel, ABS

Changing the Grafting Blade

1. To change the grafting blade, use the included tools and remove the screw holding the grafting blade in place.
2. Remove the grafting blade from the slot and insert a new one from the storage pouch.
3. Slide it into the slot and position it above the pruning blade so that the screw goes through the holes in both blades and holds them together.
4. Tighten the screw.
5. The new grafting blade is ready for use.

Warnings

• Wear safety gloves when using the tool.
• Do not put your fingers anywhere near the sharp blades when using the tool. This may result in serious injury.
• Store out of children's reach.
• Do not modify the tool in any way.

Warranty

The warranty is valid for 24 months. You can claim it from DFVU d.o.o., Liparjeva 6a, 1234 Menges, Slovenia, for a replacement product or a refund. Send your order number and purchase date via email, which is available by clicking on the logo in the bottom right corner. The product has a lifetime of 24 months from the date of collection.