Mi Sports Bluetooth Earphones mini User Manual

Getting Started

Select and Install Ear Tips

The earphones come with multiple ear tip sizes: Large, Medium, and Small. There are also Non-isolating ear tips (Middle & Small).

Diagram Description: An illustration shows the earphone components. Key parts labeled are: Earhook, Ear tip, Volume -, Multifunction button, Microphone, Volume +, Charging port, and Notification light.

It is recommended to try the medium ear tips first, as they suit most people. Adjust to a different size if needed.

Find Your Fit

Instructions: Place the earhook over the back of your ear and insert the earphone into the ear canal. Adjust the position by twisting if the fit is not secure.

For better sound quality during phone conversations, move the microphone closer to your mouth.

Pair with the Phone

The earphones are ready for pairing when used for the first time. To pair again, press and hold the multifunction button until the indicator light turns white and starts blinking.

Diagram Description: A smartphone screen shows Bluetooth settings. The device "Mi Sports BT Earphones mini" is listed under available devices.

On your phone's Bluetooth settings, find "Mi Sports BT Earphones mini" among the available devices and connect.

Charging

When the battery is low, the indicator light will turn red and start blinking, accompanied by a notification sound.

Note: After fully charging, ensure the USB port is capped to prevent moisture ingress.

Factory Reset

To perform a factory reset, press and hold the multifunction button while the earphones are charging until the indicator light starts blinking alternately.

Features

Answer Calls

Press the multifunction button once when the indicator light turns white and starts flashing to answer an incoming call.

Reject Calls

Press and hold the multifunction button when the indicator light turns white and starts flashing to reject an incoming call.

Redial Last Outgoing Number

In standby mode, double-press the multifunction button to redial the last outgoing number. (Note: This feature may vary depending on the carrier.)

Mute

During a conversation, double-press the multifunction button to mute or unmute the microphone.

Connect 2 Phones

1. Connect the earphones to the first phone and then turn off the earphones.
2. Press and hold the multifunction button until the light turns white and starts blinking. On the second phone, find "Mi Sports BT Earphones mini" in Bluetooth settings and connect.
3. After the second phone is connected, confirm the connection on the first phone.

Accept Calls from 2 Phones and Switch Between Conversations

When a call is received on the second phone during a conversation on the first phone, double-press the multifunction button to put the first call on hold and switch to the second. Double-press the multifunction button each time to switch between active calls.

Switch Between Earphones and Receiver

During a call, press and hold the multifunction button for 1 second to switch audio output between the earphones and your phone's receiver.

Play/Pause

In standby mode, press the multifunction button to play music. Press it again to pause.

Voice Assistant

Press and hold the multifunction button for 1 second to activate your phone's voice assistant (e.g., Siri, Google Assistant).

Product Features

• Bluetooth 4.1: Compatible with most phones and tablets.
• CSR Bluetooth chip: Provides reliable connectivity.
• Earhooks: Optimized for workouts, ensuring a secure fit.
• aptX audio technology: Delivers high-quality audio.

Specifications

• Product Name: Mi Sports Bluetooth Earphones mini
• Model: YDLYEJ02LM
• Size: 445×80×26mm
• Charging Time: 2 hours
• Standby Time: 200 hours
• Bluetooth Version: 4.1
• Battery Type: Lithium-ion polymer
• Weight: 14.5g
• Operating Range: 10m
• Maximum Playback Time: 5 hours
• Battery Capacity: 80mAh
• Bluetooth Profiles: HFP/A2DP/HSP/AVRCP

Precautions

1. Ensure the product is fully charged before its first use.
2. Charge the product if it remains unused for over 2 weeks.
3. Use only certified chargers supplied by qualified manufacturers.
4. If your device cannot locate the Mi Sports Bluetooth Earphones mini, verify that it is in pairing mode. The headset will power off if it fails to pair for an extended period. To resolve program errors, try rebooting your phone or the earphones, or perform a factory reset.

Warnings

1. Do not dismantle or reconfigure the product, especially in case of fire, as electron puncture can cause complete product damage.
2. Avoid exposing the product to extreme temperatures (below 0°C or above 45°C).
3. Keep the LED indicator away from the eyes of children or animals.
4. Do not use the product during thunderstorms, as lightning strikes may cause malfunctions and increase the risk of electric shock.
5. Do not wipe the product with oil or other volatile liquids.
6. Keep the product away from water or other liquids.

Federal Communications Commission Declaration of Conformity

This device complies with Part 15 of the FCC Rules. Operation is subject to the following two conditions: 1. This device may not cause harmful interference, and 2. This device must accept any interference received, including interference that may cause undesired operations.

Regulatory Notice for Users in USA

USA - Federal Communications Commission (FCC) This device is granted with FCC ID: 2AMQ6-YDLYEJ02LM.

[Warning Symbol] WARNING: This product contains a chemical known to the State of California to cause cancer or other reproductive harm.

Manufacturer: Dongguan Liesheng Electronics Co., Ltd (a Mi Ecosystem Company)

Address: F5, Building B, North Block, Gaosheng Tech Park, No. 84 Zhongli Road, Nancheng District, Dongguan City, Guangdong, China

Online Support: www.mi.com