SOUNDPEATS TrueAir2 Wireless Earbuds User Manual

Product Overview

This manual provides instructions for the SOUNDPEATS TrueAir2 wireless semi-in-ear earbuds.

The product is designed for wireless audio playback and communication.

Product Diagram

The product diagram illustrates the physical components of the earbuds and charging case. Key elements include the earbuds themselves, the charging case, and various indicators or buttons.

Diagram Description: The diagram shows the TrueAir2 earbuds, which are semi-in-ear design. The charging case is also depicted, likely showing the earbuds fitting inside for charging and storage. The diagram may also indicate connection points or controls.

Pairing Instructions

True Wireless Stereo Pairing:

1. Open the charging case lid. The earbuds will automatically turn on and enter pairing mode.
2. The indicator light on one earbud will flash white rapidly, while the other flashes white slowly, indicating they have successfully paired with each other.
3. Open your device's Bluetooth settings and select "SOUNDPEATS TrueAir2" from the list.
4. The indicator light on the earbuds will turn off once connected.

Single Earbud Pairing:

1. Take out one earbud from the charging case.
2. The earbud will automatically turn on and enter pairing mode.
3. Open your device's Bluetooth settings and select "SOUNDPEATS TrueAir2" from the list.

Controls

The SOUNDPEATS TrueAir2 earbuds feature touch controls for various functions:

• Play/Pause Music: Tap the touch control area on either earbud once.
• Next Track: Double-tap the touch control area on the right earbud.
• Previous Track: Double-tap the touch control area on the left earbud.
• Volume Up: Triple-tap the touch control area on the right earbud.
• Volume Down: Triple-tap the touch control area on the left earbud.
• Answer/End Call: Tap the touch control area on either earbud once.
• Reject Call: Long press the touch control area on either earbud for 1.5 seconds.
• Activate Voice Assistant: Triple-tap the touch control area on the left earbud.

Charging

Charging the Earbuds:

• Place the earbuds into the charging case.
• The indicator light on the earbuds will show red while charging and turn off when fully charged.

Charging the Case:

• Connect the charging case to a USB power source using the provided USB-C cable.
• The indicator light on the case will show the charging status.

Q&A

Q: What if the earbuds don't connect?

A: Ensure Bluetooth is enabled on your device and the earbuds are charged and in pairing mode. Try resetting the earbuds by placing them in the charging case, closing the lid for 10 seconds, and then reopening it.

Q: How to reset the earbuds?

A: Place both earbuds into the charging case and keep the lid open. Press and hold the touch control area on both earbuds for about 10 seconds until the indicator light flashes white twice.

Specifications

Bluetooth Version: V5.2

Supported Codecs: SBC, AAC

Battery Capacity: Earbuds: 3.7V/40mAh (each), Charging Case: 3.7V/380mAh

Charging Time: Earbuds: Approx. 1.5 hours, Charging Case: Approx. 2 hours

Playback Time: Approx. 7 hours

Total Playback Time with Charging Case: Approx. 24 hours

Waterproof Level: IPX5

Troubleshooting

If you experience issues such as no sound, intermittent connection, or poor sound quality, try the following:

• Ensure the earbuds are properly charged.
• Clean the charging contacts on the earbuds and the inside of the charging case.
• Reset the earbuds as described in the Q&A section.
• Forget the "SOUNDPEATS TrueAir2" device from your device's Bluetooth list and re-pair.

Safety Information

• Do not expose the product to extreme temperatures.
• Avoid dropping or subjecting the product to strong impacts.
• Keep the product away from water and other liquids.
• Do not attempt to disassemble the product.