Defiant Electronic Door Lever Installation Guide
Model: G32-KPLA812A
Customer Service: ? TOLL FREE HELP LINE 1-877-ONE-LOCK | HOMEDEPOT.COM (08:30 a.m.-05:30 p.m., EST, Monday - Friday)
?️ WARRANTY: LIMITED LIFETIME MECHANICAL AND 1 YEAR ELECTRONIC WARRANTY
This product is warranted by the retailer against defects in workmanship or materials for the original purchaser's lifetime (mechanical) and 1 year (electronic). To obtain service, bring the product to the store of purchase. This warranty is limited to the original retail purchaser. Implied warranties of merchantability and fitness for a particular purpose are excluded to the extent permitted by law. The retailer is not liable for consequential or incidental damages. Some states may have different warranty rights.
❗ IMPORTANT NOTICE
Please read carefully before installing, using, or servicing the product. Improper use may cause damage or loss.
?️ Installation Precautions:
- Contact your local service provider regarding door preparation.
- Perform bolt direction determination after mounting.
- Change the master code immediately to prevent unauthorized access.
- Do not remove or replace parts during installation; this may void the warranty.
- This product is not intended for use on emergency exits.
? Product Use Precautions:
- ALWAYS use authentic alkaline batteries.
- Handle the product with care, as it contains mechanical and electronic components sensitive to water, physical impact, and electric shock.
- DO NOT disassemble the product without advice from a qualified service provider; unauthorized disassembly voids the warranty.
- Refer to the troubleshooting section or contact a service provider for issues.
- Replace all batteries simultaneously with the same size and type.
- Remove batteries if the lock will not be used for over 3 months to preserve battery and lock life.
? Service and Maintenance:
- Refer to the user manual or a service provider for cleaning, moving, or maintenance.
- Information in this notice is subject to change without notice.
? Package Contents List
| Part Description | Quantity |
|---|---|
| Key | 2 |
| Cylinder | 1 |
| Exterior Assembly | 1 |
| Power Cable | 1 |
| Latch | 1 |
| Mounting Plate | 1 |
| Interior Assembly | 1 |
| Battery Cover | 1 |
| Lever | 1 |
| Strike Plate | 1 |
| Dust Box | 1 |
| Drive-in Collar (Optional) | 1 |
? Hardware Contents (Actual Size)
| Part Description | Quantity |
|---|---|
| 1-1/16" (27mm) Mounting Bolt | 2 |
| 13/16" (20.3mm) Screw | 2 |
| 3/4" (19 mm) Wood Screw | 4 |
| Catch tool | 1 |
⚠️ Safety Information
NOTE: Before installation, verify all parts are present. If any part is missing or damaged, do not proceed. Contact Customer Service or visit www.homedepot.com.
Before Proceeding:
- Check Dimensions.
- Save this manual for future reference.
- Read all precautions and instructions before installing and using the lock.
- A. Do not disassemble internal components; this voids the warranty.
- B. Avoid dropping or hitting the lockset to prevent permanent damage.
- C. Do not use sharp objects to press the keypad.
- D. Back up important information (Master Code, User Codes).
- E. Change the Master Code promptly.
- F. Restrict access to the interior assembly and check settings regularly.
CARE and MAINTENANCE:
- A. Remove locks or do not install prior to painting the door.
- B. Clean periodically with mild soap and a soft cloth.
- C. Do not use abrasives, chemical products (alcohol, benzene, acids), or sharp/abrasive objects for cleaning.
- D. Prevent water or liquids from entering the lockset during installation.
WARNING: If door drilling is required, ensure safe drill operation and understand all preparation steps.
Do not use electric drill or electric screwdriver to tighten screws.
? Tools Required
Flat head screwdriver
1️⃣ Step 1: Door Drilling For New Installation
1. Cut out the TEMPLATE and use it to mark the door, drill holes, and chisel out the mortise.
NOTE: If your door already has holes, skip to Step 2.
Drill from both sides of the door to prevent wood splitting.
Door Preparation Dimensions:
- Main Hole Diameter: 2-1/8" (54 mm)
- Edge Bore Diameter: 1" (25 mm)
- Backset Options: 2-3/8" (60 mm) or 2-3/4" (70 mm)
- Faceplate Mortise: Chisel 5/32" (3mm) deep.
Door Jamb Preparation: Use the strike plate as a template to drill latch and screw holes and chisel out the mortise. The strike plate must fit flush with the door jamb surface.
Door Jamb Hole Dimensions for Strike Plate:
- a. 1/2" (13 mm)
- b. 1-1/4" (32 mm)
- c. 1" (24 mm)
Strike Plate Dimensions:
- d. 1/8" (3 mm)
- e. 2-5/16" (58 mm)
2️⃣ Step 2: Install the latch and strike
1. Choose the correct faceplate for your door edge.
2. Set the latch backset: The latch is typically set for a 2-3/8" backset. Adjust to 2-3/4" if needed (skip if your door has a 2-3/8" backset).
Insert screws and tighten. Ensure the latch is tapped flush.
3. Install the strike plate in the door jamb. Ensure proper alignment so the bolt moves freely.
NOTE: Check the strike plate alignment for clear bolt movement.
3️⃣ Step 3: INSTALLING THE EXTERIOR LOCK ASSEMBLY
1. Choose handle direction. (If changing handle direction, set lock to auto-lock mode and remove batteries first).
2. Fasten the mounting plate to the door using the provided hardware.
3. Connect the power cable firmly into the connector port. Ensure the metal connector side faces outward.
4️⃣ SWITCH LEVERS (OPTIONAL)
If your product has asymmetrical levers, you can swap the interior and exterior levers for a 180-degree rotation.
This involves removing the inside lever, removing the outside lever, and then swapping them. The cylinder may need to be removed as well. Pay attention to key teeth orientation and lever slots.
TEMPLATE DETAILS
NOTE: Double-check your product for the correct hole sizes.
The template can be used to mark the door edge for drilling a 1" (25 mm) diameter hole at the center of the door edge.
It also indicates backset dimensions (2-3/8" or 2-3/4") and the main bore diameter (2-1/8" or 54mm).
