Dr. Brown's Natural Flow Deluxe Bottle Sterilizer User Instructions

About the Dr. Brown's Natural Flow Deluxe Bottle Sterilizer

Thank you for purchasing the Dr. Brown's Natural Flow® Deluxe Bottle Sterilizer. This appliance is designed to provide a simple, easy, and reliable way for parents and caregivers to sterilize Dr. Brown's™ baby bottles and parts before feeding your baby. It works by converting tap water into intense steam heat to kill common household germs. The unit can hold six 2 oz, 4 oz, or 8 oz Dr. Brown's™ baby bottles along with all associated parts, including nipples, collars, gaskets, stems, and travel covers. It is also compatible with most major brands of baby bottles and can sterilize other items like pacifiers, teethers, toys, cups, utensils, and breast pump parts, provided they can withstand boiling water.

As parents, we understand the importance of your baby's well-being, and this appliance will help ensure your baby's bottles and feeding equipment are more sterile.

IMPORTANT: Pour water into the device before turning it on.

Parts of the Sterilizer:

Important Safeguards

This product is for household use only. When using electrical appliances, basic safety precautions should always be followed, including:

• Read all instructions.
• Do not touch hot surfaces. Use handles or knobs.
• To protect against electrical shock, do not immerse the cord or plugs in water or other liquid.
• Close supervision is necessary when any appliance is used by or near children.
• Unplug from the outlet when not in use and before cleaning. Allow to cool before putting on or taking off parts.
• Do not operate any appliance with a damaged cord or plug, or after the appliance malfunctions or has been damaged in any manner. Return the appliance to the nearest authorized service facility for examination, repair, or adjustment.
• The use of accessory attachments not recommended by Handi-Craft® Company may cause injuries.
• Do not use outdoors.
• Do not let the cord hang over the edge of a table or counter, or touch hot surfaces.
• Do not place on or near a hot gas or electric burner, or in a heated oven.
• Extreme caution must be used when moving an appliance containing hot liquids.
• To operate, plug the cord into a wall outlet. To disconnect, turn any control to "off", then remove the plug from the wall outlet.
• Do not use the appliance for other than its intended use.
• A short power-supply cord is provided to reduce the risk resulting from becoming entangled in or tripping over a longer cord.
• Longer extension cords may be used if care is exercised in their use. If a longer extension cord is used, its marked electrical rating should be at least as great as the appliance's rating, and the cord should be arranged so it does not drape over the countertop or tabletop where it can be pulled on by children or tripped over unintentionally. The extension cord should be a grounding-type 3-wire cord.
• Never immerse the sterilizer or power cord in water.
• When in use, the sterilizer contains hot water. Be careful to avoid spilling or splashing any water on yourself when removing contents from the sterilizer.
• This appliance has a polarized plug (one blade is wider than the other). To reduce the risk of electric shock, this plug is intended to fit into a polarized outlet only one way. If the plug does not fit fully into the outlet, reverse the plug. If it still does not fit, contact a qualified electrician. Do not attempt to modify the plug in any way.
• NOT FOR SPACE HEATING PURPOSES.

SAVE THESE INSTRUCTIONS

How to Use

1. Before operating this appliance, ensure all bottles, bottle parts, and/or other accessories are clean. They must be washed, rinsed, and empty.
2. Position the appliance on a flat surface, out of reach of children, where it cannot be knocked over or moved during operation.
3. Remove the measuring cup from the side storage compartment.
4. Fill the measuring cup to the fill line molded into the front of the cup with FRESH COLD WATER and pour the water INTO THE BOTTOM OF THE HEATING CHAMBER.

   NOTE: DO NOT EXCEED the recommended amount of water. Hard water may increase build-up or residue on the heating plate. If you have hard water, using filtered or distilled water is recommended.

5. Place the removable basket (part H) into the sterilizer heating chamber. Arrange bottles and other parts as shown in Figures A through H.

   NOTE: Different layouts are shown due to variations in bottle and part sizes between standard and wide-neck bottles.

6. Insert the removable divider (part G).
7. Close the main cover (part B) and arrange parts on the grate as shown in Figures D and H.
8. Close the top cover (part A).

   NOTE: When plugging in the sterilizer for the first time, the power light will be on. THIS IS NOT AN ERROR. After the first cycle, the unit will automatically shut off.

9. Plug the power cord into an electrical outlet. Press the start button (part D). A light will illuminate behind the start button, indicating the appliance is running and creating steam. The light will remain lit until the sterilization cycle is complete (approximately 12 minutes, but may vary). When the cycle is complete, the light will go out. Allow the appliance to cool for a minimum of 10 minutes between cycles and before opening and handling the bottles and parts.
10. Open the main cover and remove all bottles, placing them on a countertop or other flat surface. Open the top cover and re-assemble the bottles with their components.

Arrangement Diagrams:

The following diagrams illustrate how to arrange items for optimal sterilization:

• Figure A: Placement of standard size stems.
• Figure B: Placement of 2 oz, 4 oz, and/or 8 oz standard size bottles.
• Figure C: Placement of standard size caps.
• Figure D: Placement of standard size parts (e.g., nipples, collars, gaskets).
• Figure E: Placement of wide-neck size stems.
• Figure F: Placement of 2 oz, 4 oz, and/or 8 oz wide-neck size bottles.
• Figure G: Placement of wide-neck size caps.
• Figure H: Placement of wide-neck size parts.

Cleaning and Maintenance

Cleaning the Appliance:

The Dr. Brown's Natural Flow® Deluxe Bottle Sterilizer should be cleaned at least once a week with regular use. Wait at least 60 minutes after a sterilization cycle for the device to cool. Before cleaning, ALWAYS disconnect the power plug from the outlet.

• The removable divider, removable basket, tongs, and measuring cup can be washed in hot soapy water and rinsed thoroughly.
• The exterior base, heating chamber, and two covers can be cleaned with a damp sponge or damp cloth.

NOTE: DO NOT IMMERSE THE STERILIZER BASE IN WATER.

Cleaning the Heating Element:

Mineral deposits may form on the metal heating element beneath the grill at the bottom of the heating chamber. It is important to de-scale this appliance every 4 weeks to ensure proper operation.

• Unplug the device.
• Remove the divider and basket.
• De-scale using a 2:1 ratio: mix 1 oz of white vinegar with 2 oz of cold water and pour directly over the heating element.
• Turn the unit on and let it run until the mixture evaporates and any scaling is removed.

NOTE: DO NOT USE HARSH ABRASIVES OR SOLVENTS TO CLEAN THE HEATING CHAMBER OR HEATING ELEMENTS, AS THEY MAY CAUSE PERMANENT DAMAGE. ENSURE PROPER VENTILATION WHEN DESCALING WITH VINEGAR.

Limited Product Warranty

The Dr. Brown's Natural Flow® Deluxe Bottle Sterilizer includes a one-year warranty against defects in material and workmanship from the date of purchase. In the unlikely event of a malfunction or defect during the warranty period, Handi-Craft® Company, at its option, will replace or repair the product under warranty. Upon receipt of the product and proof of purchase with a valid date, the defective part will be repaired or replaced and returned to you free of charge (in the USA only).

Please send the defective unit, proof of purchase with a valid date, and a description of the problem to:

Handi-Craft® Company
4433 Fyler Ave.
St. Louis, MO 63116
Attention: Dr. Brown's Natural Flow® Deluxe Bottle Sterilizer Warranty

PLEASE NOTE: This warranty does not cover a defect caused by negligence, accidents, or improper use of the appliance.

For questions, please contact Handi-Craft Company at handi-craft.com or 1-800-778-9001.

For household use only. 1 Year Limited Warranty.