Air Cooler User's Manual

Dear Customer

We thank you for purchasing our Air Cooler and kindly ask you to read and save this instruction manual carefully.

Important Safety Warnings

• Do not let the wind inlet be too close to the wall, curtain, or other objects, as this will block airflow and affect the wind effect.
• When using the unit for the first time, please check if your voltage is in accord with the nameplate for the air cooler.
• Before use, please check if the power cord and plug are damaged. Do not twist or turn the power plug to avoid poor contact.
• If the power cord is damaged, it must be replaced by the manufacturer, or similarly qualified persons to avoid a hazard.
• Do not cover the outlet, and keep the air fan away from the socket. Use a socket rated for at least 10A and do not use the same socket with other machines.
• When the air cooler is working, absolutely forbid inserting hands or foreign bodies into the network (especially pay attention to children).
• The appliance is not intended for use by persons (including children) with reduced physical, sensory, or mental capabilities, or lack of experience and knowledge, unless they have been given supervision or instruction concerning use of the appliance by a person responsible for their safety.
• Children should be supervised to ensure that they do not play with the appliance.
• Please turn off the power before pulling out the plug. Do not pull the power cord; pull the power plug to avoid a short-circuit, fire, or electric shock.
• Do not pull the power plug with wet hands to avoid the risk of electric shock.
• Please pull the plug away from the socket when the unit is not in use.
• Please do not place the working air cooler on a declining or unstable surface.
• Please do not operate the air cooler outdoors, or around baths (or showers, or pools).
• At all times, the water level display of the water tank must be less than "Max." When the air cooler is in cooling (humidifying) function, the water level display of the water tank must be more than "Min."
• After injecting water into the tank, please do not lean on or bump the air cooler when moving it.
• Please do not place anything on the air cooler.
• The outlet and inlet of the air cooler must not be covered.

Function Control Panel

The control panel features the following functions:

• ON/OFF (Speed) button: After plugging in the power cord, a buzzer will sound. Pressing the button cycles through speeds: "LOW" (low speed), "MID" (medium speed), and "HIGH" (high speed).
• Cool button: Press the "COOL" button to activate cooling mode if ice boxes have been added.
• Swing button: Press the "SWING" button to make the air outlet blades move left and right.
• Timer button: Press the "TIMER" button to select a desired timing level. The range is between 2-12 hours.
• Mode button: Press the "MODE" button to choose your desired wind mode. The sequence is: Normal, Natural, Sleep.

Indicator lights show the selected speed (POWER LOW MID HIGH), timer settings (2h, 4h, 6h), and modes (COOL, SWING). There is also an indicator for "DO NOT USE WITHOUT WATER".

Operation

How to Inject Water in the Water Tank

To inject water:

1. Pull out the water tank from the bottom of the back of the air cooler.
2. Add clean water, ensuring the tank is filled to approximately 1/3 of its capacity.
3. Note the water level display when injecting water. The water level must be less than "Max." when injecting water.
4. When the air cooler is used for cooling (humidifying) function, the water level must be more than "Min."
5. Frozen ice boxes (or ice) should be added to the water tank when you want to achieve cooler wind.

Warning: The water level of the water tank should be less than "Max." after ice boxes (or ice) are placed in the tank.

Water level indicators: "Max.", "Min."

How to Use Ice Boxes

Ice boxes help keep the water cool and slowly absorb heat from the surrounding air, allowing the air cooler to blow cooler wind. To use them:

1. Place the ice boxes in the freezer until they are frozen solid.
2. Once frozen, take the ice boxes out of the freezer.
3. Pull out the water tank and place the frozen ice boxes into the water tank.

This air cooler comes with 2 ice boxes, allowing for continuous cooling by alternating between them.

Components

The air cooler consists of the following main components:

• Air Filter: Located at the back, it filters incoming air.
• Control Panel: Located at the top front, it houses all operational buttons and indicators.
• Wet Curtain Paper: Located behind the air filter, it is responsible for humidifying and cooling the air.
• Water Pump: Circulates water to the wet curtain paper.
• Water Tank: Stores water for humidification and cooling.
• Ice Box: Reusable containers filled with water and frozen to enhance cooling.
• Outlet: Where the cooled and humidified air is expelled.
• Mobile Wheels: Located at the base for easy mobility.
• Back: The rear panel of the unit, often housing the water tank and air filter access.

Cleaning and Maintenance

Regular cleaning ensures optimal performance and longevity of your air cooler.

Clean Air Filter

To clean the air filter:

1. Unplug the unit.
2. Pull out the air filter holder by hand.
3. Remove the air filter.
4. Clean the air filter with a neutral cleaner and a soft brush.
5. Rinse it with clean water.
6. Reinsert the air filter back into the air cooler.

Clean the Wet Curtain Paper

To clean the wet curtain paper:

1. Unplug the unit.
2. Remove the air filter.
3. Take the wet curtain paper out of the air cooler.
4. Clean the wet curtain paper with a cleaner and soft brush, then rinse with fair water.
5. Reinsert the wet curtain paper back into the air cooler.

Important: To avoid leaks, ensure the wet curtain paper is installed smoothly.

Clean Water Tank

To clean the water tank:

1. Unplug the unit.
2. Remove the water tank.
3. Wipe off any scale inside the water tank using a towel with a little cleaner.
4. Clean the water tank with fair water.
5. Reinsert the water tank back into the air cooler.

Clean the Housing

Wipe the housing of the air cooler with a neutral cleaner and a soft cloth.

Important: When cleaning the air cooler, always unplug the unit and cut off the power. Ensure no part of the control panel comes into contact with water.

Compliance and Symbols

The unit complies with relevant standards, indicated by the CE mark. Please dispose of the unit responsibly according to local regulations, indicated by the [recycling symbol].