Govee Dual Smart Plug User Manual

Specifications

Safety Instructions

• This device is recommended for use indoors and in a dry location only.
• The device should only be used within its issued outlet rating stated in the instructions.
• Please contact the Govee team for a replacement if there is any damage caused by transportation.
• Please correctly plug in the socket and keep away from children.
• For added safety, please make sure to plug in the socket fully before using.
• Please do not disassemble the device. Otherwise, the device may get damaged or become a safety hazard.

Customer Service

• Warranty: 12-Month Limited Warranty
• Support: Lifetime Technical Support
• Email: support@govee.com
• Official Website: www.govee.com
• Social Media: Follow Govee on Facebook, Twitter, Instagram, and YouTube.

FCC and ISED Canada Statement

This device complies with Part 15 of the FCC Rules and Industry Canada licence-exempt RSS standard(s). Operation is subject to the following two conditions:

1. This device may not cause harmful interference, and
2. This device must accept any interference received, including interference that may cause undesired operation.

Warning: Changes or modifications not expressly approved by the party responsible for compliance could void the user's authority to operate the equipment.

This equipment has been tested and found to comply with the limits for a Class B digital device, pursuant to Part 15 of the FCC Rules. These limits are designed to provide reasonable protection against harmful interference in a residential installation. This equipment generates uses and can radiate radio frequency energy and, if not installed and used in accordance with the instructions, may cause harmful interference to radio communications. However, there is no guarantee that interference will not occur in a particular installation. If this equipment does cause harmful interference to radio or television reception, which can be determined by turning the equipment off and on, the user is encouraged to try to correct the interference by one or more of the following measures:

1. Reorient or relocate the receiving antenna.
2. Increase the separation between the equipment and receiver.
3. Connect the equipment into an outlet on a circuit different from that to which the receiver is connected.
4. Consult the dealer or an experienced radio/TV technician for help.

FCC and IC Radiation Exposure Statement

This equipment complies with FCC and IC radiation exposure limits set forth for an uncontrolled environment. This equipment should be installed and operated with minimum distance 20cm between the radiator & your body.

The Bluetooth® word mark and logos are registered trademarks owned by Bluetooth SIG, Inc. and any use of such marks by Shenzhen Intellirocks Tech. Co., Ltd. is under license.

Responsible party:
Name: GOVEE MOMENTS(US) TRADING LIMITED
Address: 13013 WESTERN AVE STE 5 BLUE ISLAND IL 60406-2448
Email: support@govee.com
Contact information: https://www.govee.com/support

Govee is a trademark of Shenzhen Intellirocks Tech Co., Ltd.
Copyright ©2021 Shenzhen Intellirocks Tech Co., Ltd. All Rights Reserved.

At a Glance

The Govee Dual Smart Plug features a socket panel, an LED indicator, and an On-Off button. The LED indicator shows the device status:

• Solid blue: Power on, Wi-Fi connected.
• No light: Power off, Wi-Fi connected.
• Solid red: Disconnected from Wi-Fi.
• Flashing blue: Connecting to Wi-Fi.

With Govee Dual Smart Plug, you can remotely turn on or off home appliances simply with a network-connected mobile phone. Or just press the button on the device to turn them on or off.

Installing Your Device

Plug the device into the socket.

Notice:

• Make sure the distance between the device and the router is less than 100ft.
• Keep as few obstructions (e.g. wall, windows) as possible between the device and the router.

Pairing Your Plug with the Govee Home App

What You Need:

• A Wi-Fi router supporting the 2.4GHz and 802.11 b/g/n bands. 5GHz is not supported.
• A smartphone or tablet running iOS 8.0 (or above) or Android 4.3 (or above).

Pairing Steps:

1. Download the Govee Home app from the App Store (iOS devices) or Google Play (Android devices).
2. Turn on the Bluetooth in your smartphone.
3. Open the app, tap the '+' icon in the top right corner and search "H5082".
4. Tap the device icon and follow the on-screen instructions to complete pairing.

Using Your Device

App Control

• Remote On/Off: Turn on/off the device remotely.
• Timer Setting: Turn on/off the device at preset time automatically.
• Off Delay: Automatically turn off the device after the time period you preset.

Voice Control

The device supports voice control via Alexa and Google Assistant. Please refer to "Using guidance" to activate. The "Using guidance" can be found through:

1. Open the Govee Home app, select your Wi-Fi plug in the Devices page.
2. Tap setting icon in the top right corner.
3. Tap "Using guidance" to follow on-screen instructions.

Troubleshooting

1. Fail to connect to Wi-Fi.

1. Make sure the distance between the device and the router is less than 100ft.
2. Keep as few obstructions (e.g. wall, windows) as possible between the device and the router.
3. Make sure the Wi-Fi name and the password you entered is correct.
4. Make sure the Wi-Fi you connect to is 2.4GHz. 5GHz is not supported.

2. Lost Wi-Fi connection./Cannot use the device with the app.

1. Make sure your home Wi-Fi works well.
2. Check whether the Wi-Fi password has been modified.
3. Keep as few obstructions (e.g. wall, windows) as possible between the device and the router.
4. Check whether the device has connected to Wi-Fi by the indicator. If the indicator is red, please re-connect the device to Wi-Fi as steps mentioned above.

Warning

• Do not press the On-Off button quickly and frequently.
• Do not plug in the appliance whose power is higher than 1800W.